View allAll Photos Tagged phaser
️ SPQR - Phase I ️
▶️ Watch the Model Film in 4K on YouTube:
▶️ Intro to SPQR Project:
Support this unprecedented project on Patreon:
www.patreon.com/RoccoButtliere
Parts: 104,000+ (~1,700 unique)
Scale: 1:650
Dimensions: 57in x 289in (143cm x 231cm)
Research Time: 2,000+ hours since 2019
Design Time: 1,000+ hours in 200 days
Build Time: 600+ hours in 90 days
Photography: EClarke Photo 📷
© MMXXIII - Rocco Buttliere, LLC
+++ DISCLAIMER +++
Nothing you see here is real, even though the model, the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
The AH-1 Cobra was developed in the mid-1960s as an interim gunship for the U.S. Army for use during the Vietnam War. The Cobra shared the proven transmission, rotor system, and the T53 turboshaft engine of the UH-1 "Huey". By June 1967, the first AH-1G HueyCobras had been delivered. Bell built 1,116 AH-1Gs for the U.S. Army between 1967 and 1973, and the Cobras chalked up over a million operational hours in Vietnam.
The U.S. Marine Corps was very interested in the AH-1G Cobra, too, but it preferred a twin-engine version for improved safety in over-water operations, and also wanted a more potent turret-mounted weapon. At first, the Department of Defense had balked at providing the Marines with a twin-engine version of the Cobra, in the belief that commonality with Army AH-1Gs outweighed the advantages of a different engine fit. However, the Marines won out and awarded Bell a contract for 49 twin-engine AH-1J SeaCobras in May 1968. As an interim measure the U.S. Army passed on thirty-eight AH-1Gs to the Marines in 1969. The AH-1J also received a more powerful gun turret with a three-barrel 20 mm XM197 cannon based on the six-barrel M61 Vulcan cannon.
During the 1990s, the US forces gradually phased out its Cobra fleet. The withdrawn AH-1s were typically offered to other potential operators, usually NATO allies. Some were also given to the USDA's Forest Service for fire surveillance, and a handful AH-1s went into private hands, including the NASA. Among these airframes were some USMC AH-1Js, which had in part been mothballed in the Mojave Desert since their replacement through more powerful and modern AH-1 variants and the AH-64.
About twenty airframes were, after having been de-militarized, bought by the Kaman Corporation in 2003, in a bold move to quickly respond to more than 20 inquiries for the company’s K-1200 ‘K-Max’ crane synchropter since the type’s end of production in 2001 from firefighting, logging and industry transport requirements. While not such a dedicated medium lift helicopter as the K-1200, which had from the outset been optimized for external cargo load operations, the twin-engine AH-1J promised to be a very effective alternative and a powerful basis for a conversion into a crane helicopter.
The result of this conversion program was the Kaman K-1300, also known as the “K-Cobra” or “Crane Cobra”. While the basic airframe of the AH-1J was retained, extensive detail modifications were made. To reduce weight and compensate for the extensive hardware changes, the SeaCobra lost its armor, the chin turret, and the stub wings. Beyond that, many invisible changes were made; the internal structure between the engine mounts was beefed up with an additional cage structure and a cargo hook was installed under the fuselage in the helicopter’s center of lift.
To further optimize the K-Cobra’s performance, the dynamic components were modified and improved, too. While the engine remained the same, its oil cooler was enlarged and the original output limit to 1.500 shp was removed and the gearbox was strengthened to fully exploit the twin-engine’s available power of 1,800 shp (1,342 kW). The rotor system was also modified and optimized for the transport of underslung loads: the original UH-1 dual-blade rotors were replaced with new four-blade rotors. The new main rotor with rugged heavy-duty blades offered more lift at less rotor speed, and the blades’ lift sections were moved away from the hub so that downwash and turbulences directly under the helicopter’s CoG and man hook were reduced to keep the cargo load more stable. Due to the main rotor’s slightly bigger diameter the tail rotor was changed into a slightly smaller four-blade rotor, too. This new arrangement made the K-1300 more stable while hovering or during slow speed maneuvers and more responsive to steering input.
The Cobra’s crew of two was retained, but the cockpit was re-arranged and split into two compartments: the pilot retained the original rear position in the tandem cockpit under the original glazing, but the gunner’s station in front of him, together with the secondary dashboard, was omitted and replaced by a new, fully glazed cabin under the former gunner position. This cabin occupied the former gun station and its ammunition supply and contained a rearward-facing workstation for a second pilot with full controls. It was accessible via a separate door or a ladder from above, through a trap door in the former gunner’s station floor, where a simple foldable bench was available for a third person. This arrangement was chosen due to almost complete lack of oversight of the slung load from the normal cockpit position, despite a CCTV (closed circuit television) system with two cameras intended for observation of slung loads. The second pilot would control the helicopter during delicate load-handling maneuvers, while the primary pilot “above” would fly the helicopter during transfer flights, both sharing the workload.
To accommodate the cabin under the fuselage and improve ground handling, the AH-1J’s skids were replaced by a stalky, fixed four-wheel landing gear that considerably increased ground clearance (almost 7 feet), making the attachment of loads on the ground to the main ventral hook easier, as the K-1300 could be “rolled over” the cargo on the ground and did not have to hover above it to connect. However, an external ladder had to be added so that the pilot could reach his/her workstation almost 10 feet above the ground.
The bulky ventral cabin, the draggy landing gear and the new lift-optimized rotor system reduced the CraneCobra’s top speed by a third to just 124 mph (200 km/h), but the helicopter’s load-carrying capacity became 35% higher and the Cobra’s performance under “hot & high” conditions was markedly improved, too.
For transfer flights, a pair of external auxiliary tanks could be mounted to the lower fuselage flanks, which could also be replaced with cargo boxes of similar size and shape.
K-1300 buyers primarily came from the United States and Canada, but there were foreign operators, too. A major operator in Europe became Heliswiss, the oldest helicopter company in Switzerland. The company was founded as „Heliswiss Schweizerische Helikopter AG“, with headquarters in Berne-Belp on April 17, 1953, what also marked the beginning of commercial helicopter flying in Switzerland. During the following years Heliswiss expanded in Switzerland and formed a network with bases in Belp BE, Samedan GR, Domat Ems GR, Locarno TI, Erstfeld UR, Gampel VS, Gstaad BE and Gruyères FR. During the build-up of the rescue-company Schweizerische Rettungsflugwacht (REGA) as an independent network, Heliswiss carried out rescue missions on their behalf.
Heliswiss carried out operations all over the world, e. g. in Greenland, Suriname, North Africa and South America. The first helicopter was a Bell 47 G-1, registered as HB-XAG on September 23, 1953. From 1963 Heliswiss started to expand and began to operate with medium helicopters like the Agusta Bell 204B with a turbine power of 1050 HP and an external load of up to 1500 kg. From 1979 Heliswiss operated a Bell 214 (external load up to 2.8 t).
Since 1991 Heliswiss operated a Russian Kamov 32A12 (a civil crane version of the Ka-27 “Helix”), which was joined by two K-1300s in 2004. They were frequently used for construction of transmission towers for overhead power lines and pylons for railway catenary lines, for selective logging and also as fire bombers with underslung water bags, the latter managed by the German Helog company, operating out of Ainring and Küssnacht in Germany and Switzerland until 2008, when Helog changed its business focus into a helicopter flight training academy in Liberia with the support of Germany's Federal Ministry of Education and Research.
A second Kamov 32A12 joined the fleet in 2015, which replaced one of the K-1300s, and Heliswiss’ last K-1300 was retired in early 2022.
General characteristics:
Crew: 2, plus space for a passenger
Length: 54 ft 3 in (16,56 m) including rotors
44 ft 5 in (13.5 m) fuselage only
Main rotor diameter: 46 ft 2¾ in (14,11 m)
Main rotor area: 1,677.64 sq ft (156,37 m2)
Width (over landing gear): 12 ft 6 in (3.85 m)
Height: 17 ft 8¼ in (5,40 m)
Empty weight: 5,810 lb (2,635 kg)
Max. takeoff weight: 9,500 lb (4,309 kg) without slung load
13,515 lb (6,145 kg) with slung load
Powerplant:
1× P&W Canada T400-CP-400 (PT6T-3 Twin-Pac) turboshaft engine, 1,800 shp (1,342 kW)
Performance:
Maximum speed: 124 mph (200 km/h, 110 kn)
Cruise speed: 105 mph (169 km/h, 91 kn)
Range: 270 mi (430 km, 230 nmi) with internal fuel only,
360 mi (570 km 310 nmi) with external auxiliary tanks
Service ceiling: 15,000 ft (4,600 m)
Hovering ceiling out of ground effect: 3,000 m (9,840 ft)
Rate of climb: 2,500 ft/min (13 m/s) at Sea Level with flat-rated torque
External load capacity (at ISA +15 °C (59.0 °F):
6,000 lb (2,722 kg) at sea level
5,663 lb (2,569 kg) at 5,000 ft (1,524 m)
5,163 lb (2,342 kg) at 10,000 ft (3,048 m)
5,013 lb (2,274 kg) at 12,100 ft (3,688 m)
4,313 lb (1,956 kg) at 15,000 ft (4,600 m)
The kit and its assembly:
This is/was the second contribution to the late 2022 “Logistics” Group Build at whatifmodellers.com, a welcome occasion and motivation to tackle a what-if project that had been on my list for a long while. This crane helicopter conversion of a HueyCobra was inspired by the Mil Mi-10K helicopter – I had built a 1:100 VEB Plasticart kit MANY years ago and still remembered the helicopter’s unique ventral cabin under the nose with a rearward-facing second pilot. I always thought that the AH-1 might be a good crane helicopter, too, esp. the USMC’s twin-engine variant. And why not combine everything in a fictional model?
With this plan the basis became a Fujimi 1:72 AH-1J and lots of donor parts to modify the basic hull into “something else”. Things started with the removal of the chin turret and part of the lower front hull to make space for the ventral glass cabin. The openings for the stub wings were faired over and a different stabilizer (taken from a Revell EC 135, including the end plates) was implanted. The attachment points for the skids were filled and a styrene tube was inserted into the rotor mast opening to later hold the new four-blade rotor. Another styrene tube with bigger diameter was inserted into the lower fuselage as a display holder adapter for later flight scene pictures. Lead beads filled the nose section to make sure the CraneCobra would stand well on its new legs, with the nose down. The cockpit was basically taken OOB, just the front seat and the respective gunner dashboard was omitted.
One of the big challenges of this build followed next: the ventral cabin. Over the course of several months, I was not able to find a suitable donor, so I was forced to scratch the cabin from acrylic and styrene sheet. Size benchmark became the gunner’s seat from the Cobra kit, with one of the OOB pilots seated. Cabin width was less dictated through the fuselage, the rest of the cabin’s design became a rather simple, boxy thing – not pretty, but I think a real-life retrofitted cabin would not look much different? Some PSR was done to hide the edges of the rather thick all-clear walls and create a 3D frame - a delicate task. Attaching the completed thing with the second pilot and a dashboard under the roof to the Cobra’s lower hull and making it look more or less natural without major accidents was also a tricky and lengthy affair, because I ignored the Cobra’s narrowing nose above the former chin turret.
With the cabin defining the ground helicopter’s clearance, it was time for the next donors: the landing gear from an Airfix 1:72 Kamow Ka-25, which had to be modified further to achieve a proper stance. The long main struts were fixed to the hull, their supporting struts had to be scratched, in this case from steel wire. The front wheels were directly attached to the ventral cabin (which might contain in real life a rigid steel cage that not only protects the second crew member but could also take the front wheels’ loads?). Looks pretty stalky!
Under the hull, a massive hook and a fairing for the oil cooler were added. A PE brass ladder was mounted on the right side of the hull under the pilot’s cockpit, while a rear-view mirror was mounted for the ventral pilot on the left side.
The rotor system was created in parallel, I wanted “something different” from the UH-1 dual-blade rotors. The main rotor hub was taken from a Mistercraft 1:72 Westland Lynx (AFAIK a re-boxed ZTS Plastyk kit), which included the arms up to the blades. The hub was put onto a metal axis, with a spacer to make it sit well in the new styrene tube adapter inside of the hull, and some donor parts from the Revell EC 135. Deeper, tailored blades were glued to the Lynx hub, actually leftover parts from the aforementioned wrecked VEB Plasticart 1:100 Mi-10, even though their length had to be halved (what makes you aware how large a Mi-6/10 is compared with an AH-1!). The tail rotor was taken wholesale from the Lynx and stuck to the Cobra’s tail with a steel pin.
Painting and markings:
Another pushing factor for this build was the fact that I had a 1:72 Begemot aftermarket decal sheet for the Kamow Ka-27/32 in The Stash™, which features, among many military helicopters, (the) two civil Heliswiss machines – a perfect match!
Using the Swiss Helix’ as design benchmark I adapted their red-over-white paint scheme to the slender AH-1 and eventually ended up with a simple livery with a white belly (acrylic white from the rattle can, after extensive masking of the clear parts with Maskol/latex milk) and a red (Humbrol 19) upper section, with decorative counter-colored cheatlines along the medium waterline. A black anti-glare panel was added in front of the windscreen. The auxiliary tanks were painted white, too, but they were processed separately and mounted just before the final coat of varnish was applied. The PE ladder as well as the rotors were handled similarly.
The cockpit and rotor opening interior were painted in a very dark grey (tar black, Revell 06), while the interior of the air intakes was painted bright white (Revell 301). The rotor blades became light grey (Revell 75) with darker leading edges (Humbrol 140), dark grey (Humbrol 164) hubs and yellow tips.
For the “HELOG/Heliswiss” tagline the lower white section had to be raised to a medium position on the fuselage, so that they could be placed on the lower flanks under the cockpit. The white civil registration code could not be placed on the tail and ended up on the engine cowling, on red, but this does not look bad or wrong at all.
The cheatlines are also decals from the Ka-32 Begemot sheet, even though they had to be trimmed considerably to fit onto the Cobra’s fuselage – and unfortunately the turned out to be poorly printed and rather brittle, so that I had to improvise and correct the flaws with generic red and white decal lines from TL Modellbau. The white cross on the tail and most stencils came from the Begemot sheet, too. Black, engine soot-hiding areas on the Cobra’s tail were created with generic decal sheet material, too.
The rotor blades and the wheels received a black ink treatment to emphasize their details, but this was not done on the hull to avoid a dirty or worn look. After some final details like position lights the model was sealed with semi-matt acrylic varnish, while the rotors became matt.
A weird-looking what-if model, but somehow a crane-copter variant of the AH-1 looks quite natural – even more so in its attractive red-and-white civil livery. The stalky landing gear is odd, though, necessitated by the ventral cabin for the second pilot. I was skeptical, but scratching the latter was more successful than expected, and the cabin blend quite well into the AH-1 hull, despite its boxy shape.
In dieser aktuellen Phase temporäre Fotos!
Zeitvertreib und etwas Abwechslung aus dem Wald
- überwiegend mit 'Altglas'.
_______________________________________
In this current phase temporary photos!
Some pastimes and little diversion from the forest
- mainly with 'older lenses'.
_____________________
Summilux-M 50mm ASPH
Amtrak P42 130, recently painted into the phase II heritage scheme, leads the California Zephyr westbound through Hinsdale. I never got a photo of Amtrak 66 in this scheme before it was involved in a grade crossing accident that ultimately ended it's serviceable life. This completes my list of Amtrak heritage units.
Moon's current phase
Date and time: February 26, 2016 - 23:55
Distance from Earth to the Moon: 405.485 km
Moon's age: 18.6 days
Moon Phase: The moon is waning
Illuminated percentage: 85%
A few blue phase snow geese arriving.
Loess Bluffs National Wildlife Area with nearly 1,000,000 migrating snow geese. The count the day before was 928,721 and likely kept going up. Also 1500 trumpeter swans but only 20 eagles. Numbers will likely increase before they continue north. Had terrible focus and exposure issues, many photos unusable. Sorry for so many and so many similar ones, just saving to my album. No need to comment.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on authentic facts. BEWARE!
Some background:
The Austrian Air Force in its current form was created in May 1955 by the victorious Allied powers, subject to restrictions on its use of guided missiles. The Austrian State Treaty of 1955 committed Austria to permanent neutrality. Pilot training started out with a four Yak-11 Moose and four Yak-18 Max aircraft donated by the Soviet Union, and Austria purchased further light trainer types under the Military Assistance Program. Until 1960 Austria purchased training and support aircraft under the MAP, but no modern fighter aircraft; the role of a fighter was rather inadequately filled by thirty already outdated Saab 29 Tunnan, bought second-hand from the Swedish Air Force in the early 1960s which equipped two fighter bomber squadrons.
To expand its capabilities and modernize the fleet, Austria purchased from 1970 on a total of 40 Saab 105 lightweight multi-role aircraft from Sweden with the intention to deploy them in trainer, reconnaissance, ground attack and even interception roles. As it became clear in the 1980s that the light sub-sonic aircraft were inadequate for air combat and airspace interdiction, Austria started looking for a more capable aircraft. In 1984, Austria had devised a two-phase solution to its problem: buying 30 interim aircrafts cheaply as a stopgap and then trading them back for a new generation aircraft in the early or mid-Nineties.
International response was quick and manifold: Bristol Aerospace offered initially ex RAF Jaguars to be replaced by Tornado F.3 or even Eurofighters; Saab-Scania offered between 24 and 30 former Royal Swedish Air Force J 35D Draken, followed by Saab J 39 Gripen as future substitutes; General-Electric suggested downgraded F-16/79 or F-16A for phase one and an option for the same aircraft in a more modern variant for phase two; Northrop’s numberF-5E was another alternative for phase one. Dassault was also present with refurbished Mirage III initially, followed by Mirage 2000.
Finding the most suitable option in this mass was not easy, and eventually a surprising deal materialized: In 1985 the contract for the sale of twenty-four Lightning F.56 fighters plus four T.55 trainers was signed by the SPÖ/FPÖ government under Fred Sinowatz. The background: Saudi Arabia had been operating thirty-four F.53 single-seaters and six T.55 trainers since 1967 and was about to retire its fleet, which was still in very good condition and with a reasonable number of flying hours left on many airframes. The aircraft would be refurbished directly at BAe in Great Britain with the option to switch to the Tornado ADV or its successor, the Eurofighter Typhoon, later.
The Lightning F.53 was an export version of the RAF’s F.6, but with a multi-role mission profile in mind that included, beyond the primary interceptor mission with guided missiles or internal guns, the capability to carry out interdiction/ground attacks and reconnaissance missions. To carry a suitable ordnance load, the F.53 featured additional underwing pylons for bombs or unguided rocket pods. Instead of the standard Firestreak/Red Top AAM missile station in the lower front fuselage, two retractable panniers with a total of forty-four unguided 50 mm rockets, which were effective against both ground and aerial targets, could be installed, or, alternatively, two camera packs (one with five cameras and another with a rotating camera mount) was available for tactical photo reconnaissance missions. Overwing hardpoints, adapted from the Lightning F.6, allowed to carry auxiliary fuel tanks to increase range/endurance, additional rocket pods or even retarded bombs.
The Lightning T.55 was also an export variant, a two-seat side-by-side training aircraft, and virtually identical to the T.5, which itself was based on the older F.3 fighter variant, and fully combat-capable.
The Saudi Arabian multi-role F.53s had served in the ground-attack and reconnaissance roles as well as an air defense fighter, with Lightnings of No. 6 Squadron RSAF carrying out ground-attack missions using rockets and bombs during a border dispute with South Yemen between December 1969 and May 1970. Saudi Arabia received Northrop F-5E fighters from 1971, which resulted in the Lightnings relinquishing the ground-attack mission, concentrating on air defense, and to a lesser extent, reconnaissance. Until 1982, Saudi Arabia's Lightnings were mainly operated by 2 and 6 Squadron RSAF (although a few were also used by 13 Squadron RSAF), but when 6 Squadron re-equipped with the F-15 Eagle from 1978 on, all the remaining aircraft were concentrated and operated by 2 Squadron at Tabuk. In 1985, as part of the agreement to sell the Panavia Tornado (both IDS and ADV versions) to the RSAF, the Lightnings were traded in to British Aerospace, returned to Warton for refurbishment and re-sold to Austria.
While the Saudi Arabian Lightnings’ hardware was in very good shape, the Austrian Bundesluftwaffe requested some modifications, including a different missile armament: instead of the maintenance-heavy British Firestreak/Red Top AAMs, the Lightnings were to be armed with simpler, lighter and more economical IR-guided AIM-9 Sidewinder AAMs which were already in the Austrian Air Force’s inventory. Two of these missiles were carried on single launch rails on the lower forward fuselage; an additional pair of Sidewinders could also be carried on the outer underwing stations, for a total of four. The F.53s’ optional retractable unguided rocket panniers were dropped altogether in favor of a permanent avionics bay for the Sidewinders in its place. However, to carry out tactical reconnaissance tasks (formerly executed by J 29Fs with a removable camera pod instead of the portside gun bay), four Austrian Lightnings frequently had one of the optional camera compartments installed, thereby losing the capability to deploy Sidewinders, though.
Among other things, the machines were furthermore upgraded with new bird strike-proof cockpit glazing, avionics were modernized, and several other minor customer requests were adopted, like a 0.6-megacandela night identification light. This spotlight is mounted in the former portside gun bay in front of the cockpit, and an anti-glare panel was added under the windscreen.
The fixed in-flight refueling probe was deleted, as this was not deemed necessary anymore since the Lightnings would exclusively operate within neutral Austria’s borders. The probes could, however, be re-installed, even though the Austrian pilots would not receive on-flight refueling training. The Lightnings' optional 260 imp gal overwing tanks were retained since they were considered to be sufficient for extended subsonic air patrols or eventual ferry flights.
The refurbished Lightnings were re-designated F.56 and delivered in batches of four between 1987 and 1989 to the Austrian Air Force’s 1st and then 2nd Fighter Squadrons, carrying a grey air superiority paint scheme. At that time, the airframes had between 1,550 and 2,800 flight hours and all had a general overhaul behind them. In 1991, the Lightings were joined by eighteen German ex-NVA-LSK MiG-23s, which were transferred to Austrian Air Force's ‘Fliegerwerft B’ at Nittner Air Base, where they'd be overhauled and updated with NATO-compatible equipment. As MiG-23Ö they were exclusively used as interceptors, too.
Shortly after their introduction, the Austrian Lightnings saw their first major use in airspace interdiction starting 1991 during the Yugoslav Wars, when Yugoslav MiG-21 fighters frequently crossed the Austrian border without permission. In one incident on 28 June a MiG-21 penetrated as far as Graz, causing widespread demands for action. Following repeated border crossings by armed aircraft of the Yugoslav People's Army, changes were suggested to the standing orders for aircraft armament.
With more and more practice and frequent interceptions one of the Lightning's basic flaws became apparent: its low range. Even though the Lightning had a phenomenal acceleration and rate of climb, this was only achieved in a relatively clean configuration - intercepting intruders was one thing but escorting them back to the Austrian border or an assigned airfield, as well as standing air patrols, were a different thing. With more tactical experience, the overwing tanks were taken back into service, even though they were so draggy that their range benefit was ultimately zero when the aircraft would use its afterburners during a typical interception mission. Therefore, the Austrian QRA Lightnings were typically operated in pairs: one clean and only lightly armed (typically with the guns and a pair of AIM-9s), to make a quick approach for visual intruder identification and contact, while a second aircraft with extra fuel would follow at high subsonic speed and eventually take over and escort the intruder. Airspace patrol was primarily executed with the MiG-23Ö, because it had a much better endurance, thanks to its VG wings, even though the Floggers had a poor service record, and their maintenance became ever more complicated.
After more experience, the Austrian Lightnings received in 1992 new ALR-45 radar detectors in a fairing on the fin top as well as chaff and flare dispenser systems, and the communication systems were upgraded, too. In 2004 the installation of Garmin 295 moving map navigation devices followed, even though this turned out to be a negligible update: on December 22, 2005, the active service life and thus military use of the Lightnings in general ended, and Austria was the last country to decommission the type, more than 50 years after the first flight of the prototype on August 4, 1954.
The Austrian Lightnings’ planned service period of 10 years was almost doubled, though, due to massive delays with the Eurofighter’s development: In 2002, Austria had already selected the Typhoon as its new “Phase II” air defense aircraft, having beaten the F-16 and the Saab Gripen in competition, and its introduction had been expected to occur from early 2005 on, so that the Lightnings could be gradually phased out. The purchase of 18 Typhoons was agreed on 1 July 2003, but it would take until 12 July 2007 that the first Typhoon would eventually be delivered to Zeltweg Air Base and formally enter service with the Austrian Air Force. This operational gap had to be bridged with twelve F-5E leased from Switzerland for EUR 75 mio., so that Quick Reaction Alert (QRA) duties for the Austrian airspace could be continued.
General characteristics:
Crew: 1
Length: 55 ft 3 in (16.84 m)
Wingspan: 34 ft 10 in (10.62 m)
Height: 19 ft 7 in (5.97 m)
Wing area: 474.5 sq ft (44.08 m²)
Empty weight: 31,068 lb (14,092 kg) with armament and no fuel
Gross weight: 41,076 lb (18,632 kg) with two AIM-9B, cannon, ammunition, and internal fuel
Max takeoff weight: 45,750 lb (20,752 kg)
Powerplant:
2× Rolls-Royce Avon 301R afterburning turbojet engines,
12,690 lbf (56.4 kN) thrust each dry, 16,360 lbf (72.8 kN) with afterburner
Performance:
Maximum speed: Mach 2.27 (1,500 mph+ at 40,000 ft)
Range: 738 nmi (849 mi, 1,367 km)
Combat range: 135 nmi (155 mi, 250 km) supersonic intercept radius
Range: 800 nmi (920 mi, 1,500 km) with internal fuel
1,100 nmi (1,300 mi; 2,000 km) with external overwing tanks
Service ceiling: 60,000 ft (18,000 m)
Zoom ceiling: 70,000 ft (21,000 m)
Rate of climb: 20,000 ft/min (100 m/s) sustained to 30,000 ft (9,100 m)
Zoom climb: 50,000 ft/min
Time to altitude: 2.8 min to 36,000 ft (11,000 m)
Wing loading: 76 lb/sq ft (370 kg/m²) with two AIM-9 and 1/2 fuel
Thrust/weight: 0.78 (1.03 empty)
Armament:
2× 30 mm (1.181 in) ADEN cannon with 120 RPG in the lower fuselage
2× forward fuselage hardpoints for a single AIM-9 Sidewinder AAM each
2× underwing hardpoints for 1.000 lb (454 kg) each
2× overwing pylon stations for 2.000 lb (907 kg each),
typically occupied with 260 imp gal (310 US gal; 1,200 l) ferry tanks
The kit and its assembly:
This was another submission to the “Hunter, Lightning and Canberra” group build at whatifmodellers.com in 2022 and intended as a rather simple build since it was based on an alternate reality plot: the weird story that Austria was offered a revamped fleet of ex-Saudi Arabian Lightnings is true(!), but the decision eventually fell in favor of revamped Saab J 35Ds from Sweden. For this what-if build I used the real historic timeline, replaced the aircraft, and built both story and model around this – and the result became the BAC Lightning F.56 in Austrian Air Force service.
Initially I wanted to use an Airfix BAC Lightning in The Stash™, a really nice model kit and a relatively new mold, but it turned out to be the kit’s F.2A variant. While very similar to the F.6, changing it into a F.53 analogue with the OOB parts turned out to be too complex for my taste. For instance, the F.2A kit lacks the ventral gun bay (it just comes with the auxiliary tank option since the guns are already located in front of the cockpit) and the cable conduits on the lower flanks. Procuring a suitable and priceworthy Airfix F.6 turned out to be impossible, but then I remembered a Hasegawa Lightning F.6 in The Stash™ that I had shot at ev!lbay many moons ago for a laughable price and without a concrete plan. However, this kit is pretty old: it has raised (yet quite fine, less robust than the Matchbox kit) panel lines and even comes with a pilot figure, but also many weak spots like the air intake and the jet exhausts that end in flat walls after some millimeters depth and a very basic cockpit. But for this rather simple what-if project the kit appeared to be a suitable basis, and it would eventually find a good use.
The Hasegawa Lightning was basically built OOB, even though I made some cosmetic amendments like a better seat for the pilot, hydraulic fluid lines on the landing gear made from wire or opening the flat walls inside of the air intake opening and the jet nozzles. Behind the radome, a simple splitter plate was added as well as a recessed bulkhead in front of an implanted Me 262 cockpit tub (the Hasegawa kit just offers a bare floor panel, nothing else!), the afterburners were extended inwards with parts from a Matchbox A.W. Meteor night fighter.
The Red Top AAMs and the in-flight refueling probe were omitted. Instead, I added extra F.53-style forward-swept pylons under the outer wings, scratched from 1.5 mm styrene sheet due to their odd, raked shape, and I added Sidewinder launch rails plus suitable missiles from a Hasegawa air-to-air weapons set to all four stations. After long consideration I also retained the ‘overburger’ tanks, partly because of the unique layout on the Lightning, and also because of operational considerations.
Chaff dispensers were scratched from styrene profiles and placed at the fin’s base. A fairing for the retrofitted radar warning sensor was added to the fin tip, created from 1.5 mm styrene sheet.
Painting and markings:
To reflect the “alternate reality” role of the Lightning I gave the model a livery similar to the Saab J 35Ö that were actually procured: an adaptation of the USAF “Egypt One” scheme, carried primarily by the USAF F-16s. Adapting this simple three-tone camouflage from the flat F-16 to the Draken was easy and straightforward, but applying it to a Lightning with its many vertical surfaces turned out to be a tough challenge. I eventually came up with a paint scheme that reminds of the late RAF low-viz Lightning liveries, which existed in a wide range of patterns and graduations of grey.
The colors were authentic, FS 36118, 36270 and 36375 (using Humbrol 125, 126 and 127), and I decided to emphasize the camouflage of the flanks against the horizon, so that the vertical surfaces and the fin became FS 36270. The undersides of wings, stabilizers and fuselage became FS 36375. The dark FS 36118 was only applied to the upper sides of the wings and the stabilizer, and to a high dorsal section, starting at the wing roots. As a small contrast, the tank area on the spine was painted in light grey, simulating unpainted fiber glass. The radome was painted with a streaky mix of Humbrol 155 and 56.
As usual, the model received a light black ink washing, some post-panel-shading in lighter tones, and, due to the raised panel lines, was very lightly rubbed with graphite. The cockpit interior was painted in medium grey (Revell 47) with an olive drab fabric fairing behind the black pilot seat, which received ejection handles made from thin wire as eye candy. The landing gear and the respective wells were painted in Humbrol 56 (Aluminum Dope).
The decals are a wild mix: The fuselage roundels are actually wing markings from a Hasegawa J 35OE, as well as the huge orange "06" on the wings (I could not resist; they will later be partly obscured by the overwing tanks, but the heck with it!). The roundels on the wings come from a generic TL Modellbau sheet - I found that I needed larger markings than those on the Draken.
Both unit and individual aircraft identifiers are single black DIN font digits, also from TL Modellbau. The unit badges on the fin are authentic, even though from an earlier era: they came from an Austrian J 29 of Fliegerregiment 2 from a PrintScale sheet, and all stencils were taken from the OOB low-viz RAF markings sheet, plus four small warning triangles for the underwing pylons.
A ‘what-if’ model in the purest sense, since this model depicts what could really have been: ex Saudi-Arabian export BAC Lightnings over the Austrian Alps! However, refurbished Saab J 35D Draken made the race (and later followed by the Eurofighter Typhoon at ‘Stage 2’), so that this Lightning remains fictional. It does not look bad in the ‘Egypt One’ paint scheme, though, better than expected!
Edited Rijksmuseum print of a "star chart" but more realistically a chart of the phases of illuminated bodies.
Image source: www.rijksmuseum.nl/en/search/objects?q=RP-P-1939-1517&...
East-German postcard by VEB Progress Film-Vertrieb, Berlin, no. 1743, 1962. Lea Massari in La giornata balorda/A Crazy Day (Mauro Bolognini, 1960).
Lea Massari, pseudonym of Anna Maria Massatani (Rome, 30 June 1933), is an Italian actress.
Born in Rome, in the district of Monteverde Vecchio, as the daughter of a Roman engineer, and also of Umbrian descent on her mother's side, during her childhood, Lea Massari lived in Spain, France, and Switzerland. Back in Rome, she enrolled at university and attended architecture courses in the early 1950s. In the meantime, she worked as a model and collaborated with the set and costume designer Piero Gherardi, a family friend, who soon introduced her to the world of cinema. With her aristocratic and refined features, underlined by her feline gaze and hoarse voice, on the set of the film Proibito (1954), where Gherardi also worked, she was noticed by director Mario Monicelli, who convinced her to play a passionate Sardinian girl, alongside Amedeo Nazzari and Mel Ferrer. The role of the sweet and in love girl was repeated with I sogni nel cassetto (1957) by Renato Castellani, where she was dubbed by Adriana Asti. On the occasion of her debut on the big screen, at the age of 21, she assumed a stage name in memory of her fiancé Leo, with whom she was supposed to be married, but who died in a tragic accident a few days before the wedding.
In the 1960s Massari took part in many Italian and French productions, playing increasingly challenging roles, mostly as a middle-class woman. She began to gain international notoriety alongside Gabriele Ferzetti and Monica Vitti in Michelangelo Antonioni's film L'avventura (1960), in which she played perhaps the most iconic role of the first phase of her career, that of a dreamy young woman who suddenly disappears. In the same period, she was in the cast of other important films: La giornata balorda (1960) by Mauro Bolognini, Il colosso di Rodi (1960) by Sergio Leone, alongside Rory Calhoun, and especially Una vita difficile (1961) by Dino Risi, alongside Alberto Sordi and Franco Fabrizi. Although uncredited, she is notable in Le quattro giornate di Napoli by Nanni Loy (1962), based on a subject by Vasco Pratolini, followed by participation in another war-themed film, La città prigioniera (1962) by Joseph Anthony, with David Niven, Ben Gazzara and Martin Balsam. In that period she received a special David di Donatello award for her performance in I sogni muoiono all'alba (1961) by Mario Craveri and Enrico Gras, based on a play by Indro Montanelli. In 1963 she was proposed for the role of Marcello Mastroianni's wife in 8½ by Federico Fellini, later assigned to Anouk Aimée; it seems that during the audition for this part the director was not convinced because of inadequate make-up by Gherardi. In the same year she starred with Francisco Rabal in I cavalieri della vendetta by Carlos Saura.
Since the early years of her career, Massari was often paired with well-known French actors, such as Jean Sorel in the aforementioned Bolognini film of 1960 (La giornata balorda), Alain Delon in Alain Cavalier's L'insoumis (1964), and Valerio Zurlini's La prima notte di quiete (1972) (for which she won the first of her two Nastri d'argento), Maurice Ronet in Il giardino delle delizie (1967), a debut film by Silvano Agosti which was heavily censored in Italy, Jean-Louis Trintignant in La course du lièvre à travers les champs (1972) by René Clément, Yves Montand in Le fils (1973) by Pierre Granier-Deferre, Philippe Leroy in La linea del fiume (1976) by Aldo Scavarda and Jean-Paul Belmondo in Chi dice donna dice donna (1976) by Tonino Cervi. In 1970 she teamed up with Michel Piccoli and Romy Schneider in the controversial Les Choses de la vie, the first success of director Claude Sautet, for which the Roman actress won the Louis-Delluc award; she would return to work with Piccoli in 1979 with Le divorcement by Pierre Barouh.
Much appreciated especially in France, after having dealt with the scabrous theme of incest in Louis Malle's Le Souffle au coeur (1971), where she played probably the most important role of her maturity and which also cost her a sensational accusation in Italy for corruption of minors, closed with a full acquittal, in 1973 she received an Étoile de Cristal as the best foreign actress. In 1969 she had also starred with Gérard Blain and debutant Teo Teocoli in Gianni Vernuccio's film Paolo e Francesca, released two years later. After appearing in John Frankenheimer's Story of a Love Story (1973), opposite Alan Bates and Dominique Sanda, and Paolo and Vittorio Taviani's Allonsanfàn (1974), opposite Marcello Mastroianni, in 1975 she was called to participate as a juror at the Cannes Film Festival. In 1977, together with Riccardo Cucciolla, she took part in the film Antonio Gramsci - I giorni del carcere by Lino Del Fra, which won the Pardo d'oro at the Locarno Festival. In 1979 she received her second Nastro d'argento for the role of Luisa Levi in Cristo si è fermato a Eboli (1978) by Francesco Rosi, where she played alongside Gian Maria Volonté, whom she herself considered the best colleague she had ever worked with.
Massari has also worked successfully in the theatre, including in William Gibson's Due sull'altalena/Two for the Seesaw (1960), directed by Arnoldo Foà, and on television, as in Capitan Fracassa (1958), I promessi sposi (1967), in the role of the Monaca di Monza, I fratelli Karamazov (1969) and Quaderno proibito (1980); particularly appreciated by audiences and critics was her performance in Sandro Bolchi's Anna Karenina (1974), repeated several times by RAI. Her last appearance on the small screen was in Una donna spezzata (1988) by Marco Leto, based on the novel La femme rompue by Simone de Beauvoir and scripted by Massari herself.
Passionate about hunting from a young age, following the example and encouragement of her father, she reduced her artistic activity from the early 1980s onward. She appeared again in Giuseppe Bertolucci's film Segreti Segreti (1985) (in which she played the painful role of Lina Sastri's suicidal mother), to devote herself decisively to ecological and animal rights campaigns. An actress notoriously disinclined to be a star, shy and reserved, and often forced to live and work abroad partly because of her husband's work, she retired for good in 1990, at the age of 57. After that she rarely appeared in public and gave few interviews, refusing various invitations to return to the set, such as the one received by Ferzan Özpetek, who in 2005 wanted her in Cuore sacro, in a role then assigned to Lisa Gaston. Her last film, which had little success, was Viaggio d'amore (1990) by Ottavio Fabbri, based on a subject by Tonino Guerra, in which she starred alongside Omar Sharif. After retiring from the stage, she moved to Sardinia with her husband (married in 1963) Carlo Bianchini, a former Alitalia pilot. Following a financial crisis, she put her important collection of antique jewelry up for auction in 1994.
In addition to her campaigns in defense of animals and against vivisection, which also led her to support various dog pounds, her passion for the guitar and Brazilian music is well known.
Sources: Wikipedia (Italian) and IMDb.
And, please check out our blog European Film Star Postcards.
️ SPQR - Phase I ️
▶️ Watch the Model Film in 4K on YouTube:
▶️ Intro to SPQR Project:
Support this unprecedented project on Patreon:
www.patreon.com/RoccoButtliere
Parts: 104,000+ (~1,700 unique)
Scale: 1:650
Dimensions: 57in x 289in (143cm x 231cm)
Research Time: 2,000+ hours since 2019
Design Time: 1,000+ hours in 200 days
Build Time: 600+ hours in 90 days
Photography: EClarke Photo 📷
© MMXXIII - Rocco Buttliere, LLC
coming to abnormality on feb 7th, two collars, one sinner one saint. pbr and infinitely tintable using the included hud. don't like the words? turn them off! or use the uv map in the notecard to make your own!
taxi: maps.secondlife.com/secondlife/Abnormality/128/127/3910
️ SPQR - Phase I ️
▶️ Watch the Model Film in 4K on YouTube:
▶️ Intro to SPQR Project:
Support this unprecedented project on Patreon:
www.patreon.com/RoccoButtliere
Parts: 104,000+ (~1,700 unique)
Scale: 1:650
Dimensions: 57in x 289in (143cm x 231cm)
Research Time: 2,000+ hours since 2019
Design Time: 1,000+ hours in 200 days
Build Time: 600+ hours in 90 days
Photography: EClarke Photo 📷
© MMXXIII - Rocco Buttliere, LLC
These are phases of the eclipse as I viewed it. The solar paper was on the lens prior to and post totality giving us the golden colored sun.
The top images are pre-totality as the moon entered the scene and began its trip across the sun, and the bottom are post totality as the moon moved away.
️ SPQR - Phase I ️
▶️ Watch the Model Film in 4K on YouTube:
▶️ Intro to SPQR Project:
Support this unprecedented project on Patreon:
www.patreon.com/RoccoButtliere
Parts: 104,000+ (~1,700 unique)
Scale: 1:650
Dimensions: 57in x 289in (143cm x 231cm)
Research Time: 2,000+ hours since 2019
Design Time: 1,000+ hours in 200 days
Build Time: 600+ hours in 90 days
Photography: EClarke Photo 📷
© MMXXIII - Rocco Buttliere, LLC
️ SPQR - Phase I ️
▶️ Watch the Model Film in 4K on YouTube:
▶️ Intro to SPQR Project:
Support this unprecedented project on Patreon:
www.patreon.com/RoccoButtliere
Parts: 104,000+ (~1,700 unique)
Scale: 1:650
Dimensions: 57in x 289in (143cm x 231cm)
Research Time: 2,000+ hours since 2019
Design Time: 1,000+ hours in 200 days
Build Time: 600+ hours in 90 days
Photography: EClarke Photo 📷
© MMXXIII - Rocco Buttliere, LLC
️ SPQR - Phase I ️
▶️ Watch the Model Film in 4K on YouTube:
▶️ Intro to SPQR Project:
Support this unprecedented project on Patreon:
www.patreon.com/RoccoButtliere
Parts: 104,000+ (~1,700 unique)
Scale: 1:650
Dimensions: 57in x 289in (143cm x 231cm)
Research Time: 2,000+ hours since 2019
Design Time: 1,000+ hours in 200 days
Build Time: 600+ hours in 90 days
Photography: EClarke Photo 📷
© MMXXIII - Rocco Buttliere, LLC
️ SPQR - Phase I ️
▶️ Watch the Model Film in 4K on YouTube:
▶️ Intro to SPQR Project:
Support this unprecedented project on Patreon:
www.patreon.com/RoccoButtliere
Parts: 104,000+ (~1,700 unique)
Scale: 1:650
Dimensions: 57in x 289in (143cm x 231cm)
Research Time: 2,000+ hours since 2019
Design Time: 1,000+ hours in 200 days
Build Time: 600+ hours in 90 days
Photography: EClarke Photo 📷
© MMXXIII - Rocco Buttliere, LLC