View allAll Photos Tagged components,
Clearly visible here are the Simplex gear stops on down tube and chainstay and Gillotts' own Osgear dropout brazeon. This frame has ONLY this bracket for the tension arm. The 49 Curly Cut is similar. The orange 51 Spear has the chainstay tab.
'71 -'73 Gilbern Invader ..
Overview
Manufacturer Gilbern Sports Cars (Components) Ltd
Production 1969-1973
603 made[9]
Body and chassis
Body style 2-door coupé
Powertrain
Engine 2,994 cc Ford Essex V6
Transmission 4-speed manual all-synchromesh
Dimensions
Wheelbase 93 in (2,400 mm)
Length 159 in (4,000 mm)
Width 65 in (1,700 mm)
Height 51 in (1,300 mm)
Chronology
Predecessor Gilbern Genie
The final car was the Invader, introduced in July 1969 and based on the Genie but with improved chassis and larger brakes. The front suspension now came from the MGC and the chassis was strengthened. It took the brand further up- market with fittings such as electric windows and walnut-veneered dashboard. The Invader was available as a complete car and from 1970 an estate version was also produced. Automatic or manual transmission with overdrive were available. It was updated to the Mk II version in 1971.
1972 Gilbern estate in front of Red Dragon pub in Wales
Launched in September 1972, the Mk III version had a Ford Cortina front suspension and was restyled front and rear. The engine was the higher tune unit from the Ford Capri 3000GT. The body was produced using new moulds and was both wider and lower than that of the earlier Invader.Track was extended by four inches (10 cm).
The wider axle led to wheel spats being added to the sides of the car. At the back the live rear axle was located by trailing links and a Panhard rod: adjustable shock absorbers were fitted all round.
1973 Gilbern Invader Mk III, note widened fenders
It was only available as a factory-built car and cost £2,693 in 1972.
@ Sainsbury's - Burpham - Guildford - Surrey -UK
10000+ Components with Layout, Stencil Services, All Under 1 Roof! goo.gl/hhfzvv #AeroCircuitBoard #DefensePCB #PCBLayout #PowerStencils #PCBSolution #7segment #Soldering #Electronics #PCB #Technology #Prototype #ElectronicEngineering #ElectronicEngineer #SingleLayerPCB #DoubleLayerPCB #MultiLayerPCB
Bought in component parts off Ebay. Vile 40+ year old chrome does not affect performance – it flies!
photo by Alan Kempster for Ayr Classic Motorcycle Club.
My whole house mediacenter solution:
Family Room
47” 1080p Vizia LCD
Main Mediacenter (Vista X86)
Theater Room
Xbox 360 (Gaming)
MCE05 (Still using MCE due to videocard and sound decoding issues)
Panasonic AE900U 720p LCD projector (140” screen)
Gallo Reference Mains and center
Gallo Micro rears
4 AE IB 15’s subwoofers located in the ceiling
Bedroom
50” 720p Vizia Plasma
Linksys DMA2100
Extra Bedroom/Workout room
Old Toshiba 36” tube tv
Xbox 360
Home Automation is controlled by Mcontrol
80% of my lights are zwave switches.
TZ 16 Zwave Thermostat
EzRain Irrigation controller
Elan Z630 pre-amp for multizoned audio(house is divided up into 3 zones)
On my ride to work this morning, a spoke broke on my rear wheel. On my way to the bike shop to have that repaired, my handlebar broke. Only my superhuman balance saved me from a broken collarbone or worse.
The components for the SE 17th Ave & Holgate Blvd Station shelter will be installed soon.
Licensed for all uses by TriMet.
Ramsey Campbell's botanic Green God (it is actually nameless) and its Children from his short story "The Horror under Warrendown" were the basis for this custom Great Old One for Arkham Horror 2nd Ed..
I wanted to incorporate both threats in a rather simple fashion, without extra game material, so that the Green God can be easily integrated into the basic game and its expansions. Therefore, the standard Cultists were employed as The Green God's mutated, rodent-teethed and rabbit-like Children, and they became part of a kind of race sub-plot that adds threat but also offers players the option to counter it.
When a Child of the Green God appears through regular play, it will dash across the board and potentially open an additional Gate, speeding up the Great Old One's awakening and releasing some more Monsters onto Arkham's streets.
The Children themselves are not very dangerous, but they are fast and hard to confront, so that players better act fast to stop them. However, a confrontation with them is potentially dangerous, too, because Investigators might become infected with the Green God's mutagenic matter, initiating the slow but hard-to-stop transformation into a Child, which will eventually try to open a new Gate! This conforms not 100% with the literature background (only the Green God is "infectious"), but it's a nice players' threat.
With six Cultists in the basic game and a few more in the expansions, this will not happen frequently, though.
However, as a threat balance, the curse-induced transformation also starts with ANY Curse the Investigators might catch!
The final battle relies on a similar pattern, based upon being Cursed and starting to gradually mutate into Children of the Green God.
From: www.connectedaction.net
Connections among the Twitter users who follow @Amy_Harmon when queried on August 15, 2011, scaled by numbers of followers (with outliers thresholded). Connections created when users reply, mention or follow one another.
See: twitter.com/#!/amy_harmon
Layout using the "Group Layout" composed of tiled bounded regions. Clusters calculated by the Clauset-Newman-Moore algorithm are also encoded by color.
A larger version of the image is here:
Betweenness Centrality is defined here: en.wikipedia.org/wiki/Centrality#Betweenness_centrality
Clauset-Newman-Moore algorithm is defined here: pre.aps.org/abstract/PRE/v70/i6/e066111
Top most between users:
@amy_harmon
@nytimes
@nickkristof
@billgates
@rebeccaskloot
@shitmydadsays
@stevesilberman
@matthewherper
@markoff
@brainpicker
Graph Metric: Value
Graph Type: Directed
Vertices: 1161
Unique Edges: 11153
Edges With Duplicates: 14584
Total Edges: 25737
Self-Loops: 0
Connected Components: 1
Single-Vertex Connected Components: 0
Maximum Vertices in a Connected Component: 1161
Maximum Edges in a Connected Component: 25737
Maximum Geodesic Distance (Diameter): 2
Average Geodesic Distance: 1.974447
Graph Density: 0.013690635
NodeXL Version: 1.0.1.174
More NodeXL network visualizations are here: www.flickr.com/photos/marc_smith/sets/72157622437066929/
NodeXL is free and open and available from www.codeplex.com/nodexl
NodeXL is developed by the Social Media Research Foundation (www.smrfoundation.org) - which is dedicated to open tools, open data, and open scholarship.
The book, Analyzing social media networks with NodeXL: Insights from a connected world, is available from Morgan Kaufmann and from Amazon.
Marc Smith on Twitter.
Type 306 stainless rods, nuts, hex cap screws, and washers. Aluminum bar stock to secure the battery.
Componentes de la op.EUTM #Mali XIII reciben en Bri."Galicia" VII #Pontevedra condecoraciones por su acción y frustrar ataque terrorista en febrero. #SomostuEjército ️ @Defensagob @eutmmali1
EUROBIKE, 28 August 2014. Lectures on LEV Components within the LEV Components Special Exhibition.
Read the article: extraenergy.org/main.php?language=en&category=&su...
4130 chro-mo tubing, including fork; Sugino VP triple with 52/44/36 teeth & 175 mm cranks; MKS Sylvan pedals (they and the bottom bracket all spin freely and happily); low-end Suntour α-3000 derailer (which suggest circa 1987-89 if original) paired with basic Shimano shifters (discontinued after mid-1990s.)
Mid-fork braze-ons for lowriders or a rack. A 700 x 32C Kenda Qwest fits in the fork with room for carefully installed fenders, but I'm not sure I could get one in the back. Horizontal rear dropouts, integrated rear cable stop for center-pull cantis. Kuwahara Cyclone headset. Heavy-duty quill stem that I should have taken a photo of.
20 lbs as found. I am just a sucker for derelict bikes.
[edit] Snooping around on forums yields a best guess that it is a Kuwahara Parkway. The crankset seems to be an upgrade, and likely the SunTour ders as well. Although a 700c wheel fits in the front (and possibly might just fit in the back) the brake posts would be in the wrong place, unless one wanted to buy fancy brakes that are worth way more than the bike (...or an add-on bracket that sits on the existing posts and provides newer ones higher up/further from the hub.) So a 26" touring mtn cruiser it is!
When this rideable, this will be a boon companion to the Kuwahara Blazer mixte I got rolling last year.
update: serial #86123562 seems to indicate a date-of-manufacture in Dec 1986, which jives with the earliest estimate based on the derailleur line.
...es la transformación de las formas y presentaciones habituales de los objetos de cartón, papel, lata, vidrio, algunos plásticos y residuos orgánicos, en materias primas que la industria de manufactura puede utilizar de nuevo.
También se refiere al conjunto de actividades que pretenden reutilizar partes de artículos que en su conjunto han llegado al término de su vida útil, pero que admiten un uso adicional para alguno de sus componentes o elementos. (Wikipedia).
Composants électroniques (focus stacking).
Image composée de 42 photos prises avec la bonnette Raynox DCR-250 et assemblées avec Zerene Stacker.
All the parts in the kit are labeled with "R1", "C2", etc. This makes for a VERY speedy assembly as I didn't have to stop and identify parts before installing them.
Campus Centro UFRGS, Porto Alegre, RS, Brasil, 27.06.13: Instalaçoes do Lamef Campus Centro: equipamento de ensaios de fadiga. (Foto: Thiago Cruz/UFRGS)
NORTH ARABIAN SEA (July 12, 2008) Aviation Electronics Technician 3rd Class Travis Prater, from Paris, Texas, checks components on an interconnection box used for inputting information on circuit cards used in the aircraft aboard the Nimitz-class aircraft carrier USS Abraham Lincoln (CVN 72). Lincoln is deployed to the U.S. 5th Fleet area of responsibility to support Operations Iraqi Freedom and Enduring Freedom as well as maritime security operations. U.S. Navy photo by Aviation Electronics Technician Airman Ashley Houp (Released)
I really love the rusty, crusty look of these headpins.
Copyright © 2013 by Ginger Davis Allman The Blue Bottle Tree, all rights reserved.
A stack of seventies Braun - Dieter Rams' 1978 studio hifi components, including the PDS 550 turntable, TS 501 tuner, A 501 integrated amplifier and C 301 cassette deck, which was co-designed with Peter Hartwein.
Joline Blais introduces permaculture principles at the start of Still Water: What Networks Need to Thrive (amongst the results of the previous week's Scrapyard Challenge) at the School of Cinematic Arts Gallery, University of Southern California.
Part of Redesigning Reality, a series sponsored by USC's Visions and Voices [web-app.usc.edu/ws/eo2/calendar/113/event/893758].], Media Arts and Practice PhD program [imap.usc.edu/]. and Institute for Multimedia Literacy [iml.usc.edu].
'Istanbul Museum of the History of Science and Technology in Islam' (Turkish: İstanbul İslam Bilim ve Teknoloji Tarihi Müzesi)
Got a much better shot of a component for an in-process MOC (a project which has stalled worse than my 16-year-old truck).
I love doing large humanoid builds. Before my dark age, two-legged robots were my bread and butter, so to speak. I'm not used to doing something this small, though. Nor was I prepared for the difficulty in trying to simulate bones without skin. Overall, I'm relatively pleased with the bag-o'-bones...except for the head. I'm still not happy with its skull.
By the way, this little fella is a throwback to a Lego theme of days gone by. Anyone want to take a guess what he is?
Schwinn Voyageur 1986 _
Complete set of alloy triple touring chainrings. These preceded the pins and ramps now common on indexed chainrings. They shift quite well in spite of the uneven spacing required beneath the front derailleur - to allow variable spacing for the oval rings.
Although used, these show very little wear - just as was evident on every part of the bike and ALL of its original components.
DSCF1836a
Componentes de la op.EUTM #Mali XIII reciben en Bri."Galicia" VII #Pontevedra condecoraciones por su acción y frustrar ataque terrorista en febrero. #SomostuEjército ️ @Defensagob @eutmmali1
First run of the Component Tester, with an inductance.
Portuguese Elektor nº137, May 1996
All resistors are 1% precision or better.
The N-Chanel JFET transistor BF256A required for the Wien oscillator ("A" version mandatory because of the 3 to 7 mA Idss) was replaced here (and only seen in this picture) by 2N5485 (Idss of 4 to 10mA), but be advised that his pins are reversed (BF256 1-G, 2-S, 3-D and 2N5485 1-D, 2-S, 3-G)
Magazin (FR version) can be found here:
archives.doctsf.com/documents/feuilleter_document.php?num...