View allAll Photos Tagged components,
In game screenshot (3440x1440)
Follow my work on:
Become a Citizen with 5k in-game currency to your name.
....then add me in game!
This is the Screaming Yellow Zonker machine that popped out 7101SYZQE toggle switches at rates up to 40+ per minute. Just like printing money. It ran like clockwork for over 25 years. A second copy of this machine was shipped over to the C&K factory in Kettering England.
It was able to do additional options by the time I got on the 2nd shift in 1989. We were able to run 7103s, 7105s and7107s. Z, Q, C, A & AV terminations. The bending was a secondary operation on a small machine adjacent to the 100. It could be changed over in a half an hour to run 8121's as well. Close to 15,000 per shift.
See the detailed information on the Bodine machine in the comments section below.
Bodine Assembly Machine location on Wikimapia.org
Photo: CK Bodine
The power unit of ex-English Welsh & Scottish Railway/DB Schenker class 37/4 No.37422 was extracted at Direct Rail Services Ltd Kingmoor Depot, Carlisle today, 4th June 2012, by a heavy lift crane brought in for the purpose. Beyond the depot security palisade fencing viewed from the Kingmoor Sidings Nature Reserve, the power unit is seen on a road trailer ready for transportaton away from the depot as the shell of 37422, with its roof panel removed, stands alongside. It remains to be seen what will happen to this locomotive, but this may be a positive indication.
© Copyright Gordon Edgar - No unauthorised use
PARQUE VERDE LA CARLOTA
Concurso Público Internacional de Ideas Para Transformar la Base Aérea en Parque Verde Metropolitano. Caracas, Venezuela
Mención de Honor
LAP+LATITUD
Colaboradores:
Diana Cristina Montoya.
Equipo de Trabajo:
Prac. Guillaume Avila
Prac. Andrés Velázquez
Prac. Daniel Zuluaga
Prac. Sara Arteaga
Prac. Mallely Cano
Prac. David Mesa
Prac. Sebastián Vélez
IDbike TMM4 torque sensor at LEV Components Special Exhibition.
Read the article: extraenergy.org/main.php?language=en&category=&su...
Pro-Railing is a range of handrailing components designed with simplicity of use in mind. This handrail and stainless steel balustrade system consists of over 1000 components, allowing for the quick installation of complex and attractive stainless steel railings and balustrade systems; simply cut then glue or screw to create a clean and contemporary look, giving you professional results every time. It is available in stainless 304 for internal installations and stainless 316 for exterior handrails or balustrades, and comes either in a brushed steel or mirror polished finish.
To view Pro-Railing products please visit:
Pro-Railing is a range of handrailing components designed with simplicity of use in mind. This handrail and stainless steel balustrade system consists of over 1000 components, allowing for the quick installation of complex and attractive stainless steel railings and balustrade systems; simply cut then glue or screw to create a clean and contemporary look, giving you professional results every time. It is available in stainless 304 for internal installations and stainless 316 for exterior handrails or balustrades, and comes either in a brushed steel or mirror polished finish.
To view Pro-Railing products please visit:
Top view of the saddle with Campagnolo logo, plated rivets and two dimples. This one's cantle plate is stamped A61 which Brooks tells me is for 1961. It was only in production for a few years. Brooks tell me it was introduced in 1959 and dropped in 1963.
Presented at the 2013 KAPiFrance conference. Controller box interior, under the cover is the SmallHD video monitor's batteries and batteries for RC's TX and the video's RX, rheostats & shutter button. The box holds the video RX and the RC TX board.
Pro-Railing is a range of handrailing components designed with simplicity of use in mind. This handrail and stainless steel balustrade system consists of over 1000 components, allowing for the quick installation of complex and attractive stainless steel railings and balustrade systems; simply cut then glue or screw to create a clean and contemporary look, giving you professional results every time. It is available in stainless 304 for internal installations and stainless 316 for exterior handrails or balustrades, and comes either in a brushed steel or mirror polished finish.
To view Pro-Railing products please visit:
PictionID:44025899 - Title:Atlas Component - Catalog:14_009131 - Filename:14_009131.TIF - - - - - Image from the Convair/General Dynamics Astronautics Atlas Negative Collection---Please Tag these images so that the information can be permanently stored with the digital file.---Repository: San Diego Air and Space Museum
All photos should be credited to Fairphone
Creative Commons License: creativecommons.org/licenses/by-nd-nc/1.0/
PictionID:44811567 - Title:Atlas Payload Component - Catalog:14_014440 - Filename:14_014440.TIF - - - - Image from the Convair/General Dynamics Astronautics Atlas Negative Collection. The processing, cataloging and digitization of these images has been made possible by a generous National Historical Publications and Records grant from the National Archives and Records Administration---Please Tag these images so that the information can be permanently stored with the digital file.---Repository: San Diego Air and Space Museum
I decide that this component is large enough to become two: one larger and one smaller version of the same design
The Avalanche Detection System at Bear Pass, on Hwy 37A, gathers data about moving snow and ice masses on large expanses of avalanche terrain, up to five kilometres away.
When there’s movement, the radar recognizes that as an algorithm matching avalanche activity, captures the information and triggers a real-time alert which is sent to our Bear Pass avalanche team. The message contains critical information such as location, size and frontal speed of the event, that the team can immediately analyze, to determine the response required and any risks set off by the movement.
Traditionally, one aspect of avalanche monitoring is on-site observation, which restricts the team’s ability to collect data on avalanche activity to daylight hours and good weather. The AADS helps our avalanche experts to continuously monitor avalanche activity day or night, in any weather condition, from their mobile device.
The gear is shown with a spacer already press fit into the 1/4" central opening. I would have liked to photograph all the components separately but I couldn't easily separate these pieces!
Pro-Railing is a range of handrailing components designed with simplicity of use in mind. This handrail and stainless steel balustrade system consists of over 1000 components, allowing for the quick installation of complex and attractive stainless steel railings and balustrade systems; simply cut then glue or screw to create a clean and contemporary look, giving you professional results every time. It is available in stainless 304 for internal installations and stainless 316 for exterior handrails or balustrades, and comes either in a brushed steel or mirror polished finish.
To view Pro-Railing products please visit:
Multi-Component Inspector Kit (MCIK) for Complementary Access (CA)/DIV Inspections
Safeguard Equipments - Visual observation instrument (camera), physical characteristics measurement instrument (laser range finder with built-in viewfinder), nuclear measurement instrument (HM-5, inside bag) flashlight and multi-port charger. IAEA Vienna, Austria, 3 October 2018
Photo Credit: Dean Calma / IAEA
Manual de instruções, lancetas descartáveis, alças coletoras descartáveis, tampão de corrida, suporte na embalagem e suporte fora da embalagem.
A rather overly complicated machine with a single purpose. To create lengths of wire with the insulation removed from either end. (for use in electronics breadboards)
(an example: www.flickr.com/photos/snazzyguy/3162122089/ )
Wondering What it Does?
Check out a video of it in action here:
www.youtube.com/watch?v=F2O7kGE34EA
Wish to make your own?
Details can be found here:
www.thingiverse.com/thing:268/
Care to check out more delightfully fun open source projects:
Viewfinder removed from an old film camera. _Really_ interesting mechanics - it's like a periscope with more magic.
This old Aveling Barford dump truck is the "gate guard" at a private landfill site in Wellington. Was the modified Ergomatic cab door an original fitment I wonder??
What would you call this one? Tribal? I'm having trouble describing this pattern.
Copyright © 2013 by Ginger Davis Allman The Blue Bottle Tree, all rights reserved.
Because you asked, here's a description of the making of Helium Head.
Though I was giddy and lightheaded with this idea, getting in the air required more than inhaling some helium. My first attempt had me hanging by my hands from a tree branch I could reach by jumping. My camera was mounted to my tripod which was laying on the ground with the camera head angled up. Even with my lens zoomed out to 18mm, I couldn't get my whole body into the frame. I had to get higher, so using a ladder was the answer.
To keep from breaking any limbs (mine, not tree limbs), I set my ladder next to a tree and lashed it to the trunk so that when I was at the top, the ladder wouldn't tip over and put me on my head. After about 4-5 attempts of pushing the shutter button set on a 10 second timer, scrambling up the ladder and turning to sit sideways on the top step (try hanging onto a ladder with just your butt) I was able to get a shot I was happy with. (I suspect I entertained, or perhaps worried my neighbors with all this activity as well) In post production, I used a layer mask and black brush set to about 80% edge hardness to remove the background from around my body.
Next shot was to get a separate photo of my head against a blue sky so I wouldn't have to do any work cutting out around my hair. I moved to a new location, making sure I was still facing into the sun. I added a strobe to the camera to reduce the shadows under my brow, nose, chin, and in my mouth, then held back my collar so that it wouldn't be included in the enlarged head photo. In post-production I used a layer mask to cut-out my head and place it into the body image, then used the warp tool to reduce the size of my neck to fit into my smaller collar opening.
I shot the top branches of a tree to add to the bottom of the photo to help with the illusion that I was rising above the ground. I blurred the tree branches to give them the appearance in the final image of being farther away and not the main focus of the image. Blurring the branches made my feet appear extra sharply focused and helped separate them from the background.
Lastly, I pulled a photo of clouds from my stock "Clouds" folder (I often shoot pictures of just clouds to keep for later use) and composed them into the shot for a little extra detail. Color adjustment, contrast, and spot sharpening was done to the overall image and wallah - 4 hours later I was done!