View allAll Photos Tagged sensor
21st century solar powered seismometry equipment (it is California, after all), behind which I found the cairn and cache noted pictured in another photo in this series.
Lassen Volcanic National Park
This is an 2 MegaPixel sensor from an damaged mobile phone (W880i).
The One-Euro-Cent coin and the match should be helpful to recognize the real size. I think it's amazing!!! Two millions of photon catchers on an area of 2x3 milimeters
the used sensor after the 3 day trial at my endo's office
the used sensor after the 3 day trial at my endo's office
Detects moisture content of soil. For use with my book planter, which I won't be able to open to tell if the soil needs watering. The alligator clips attach to the nail heads protruding through the side of the book and the sensor illuminates a number of LEDs depending on the conductivity between the two nails.
The IR Range Sensor is a great way to add range detection to robotic projects that use Cerebotâ„¢ boards. The sensor detects reflective objects 10 to 80 cm away.
The sensor connects to the ADC found on all Cerebot boards. The cable maps the output pins to a 3-pin connector. The yellow wire is for the analog output signal. The pin should be connected to the analog-to-digital converter (ADC) on your microcontroller. The red wire is the Vcc power supply to the sensor and is diode-protected against reverse polarization. The black wire should be connected to the ground of the ADC.
The International Symposium on Sensors and Instrumentation in IoT Era, ISSI 2019, took place at ISCTE-IUL on the 29th and 30th of august 2019.
Gala Dinner over the River Tagus.
Fotografia de Hugo Alexandre Cruz.
These are the sensors placed on the body that enable the motion data to be captured. They have velcro on the other side and are worn at the joints.
My local wine store just installed automatic doors. The black rectangular device in the middle at the top of the doors senses movement, then opens the doors.
Tree (sensor) dispencer being positioned for placing on bomb lift truck. Ubon RTAFB 1971. Bomb dump personnel transported munions to flight line on trailers. Load crews would then remove from trailers and load onto aircraft. Trees were sensors that detected foot and vehicle movement and would transmit data to overhead aircraft. Data would then be sent to Igloo White for processing and targetting assignment.
The IR Range Sensor is a great way to add range detection to robotic projects that use Cerebotâ„¢ boards. The sensor detects reflective objects 10 to 80 cm away.
The sensor connects to the ADC found on all Cerebot boards. The cable maps the output pins to a 3-pin connector. The yellow wire is for the analog output signal. The pin should be connected to the analog-to-digital converter (ADC) on your microcontroller. The red wire is the Vcc power supply to the sensor and is diode-protected against reverse polarization. The black wire should be connected to the ground of the ADC.
Pictured: Antonio Mendoza (President of Balluff Mexico), Joe Kempo (Balluff Inc. Southeast Area Sales Manager), and Kent Howard (President of Balluff, Inc.)
Motion sensor sink, it makes the building green because it saves water. People cant just leave the sink running, the motion sensor only allows the water to turn on when hands are in front of the sensor.
RAIN SENSORS — Rain sensors mounted at the top of a post. These were placed on posts to avoid overhanging obstructions. (Image courtesy Dan Sandor)
Here's a good example of some accumulated sensor dust! I've had this camera since 2008 and have used it on and off. I've only recently got back to using it heavily and discovered some spots on many but not all photos. After a bit research I found that it was dust on the sensor. I'm about to have a go at removing it myself with a blower. Haven't used the blower since last autumn when the leaf litter in the driveway was really bad...
The dreaded wet sensor clean. Things got worse before they got better. Followed a method similar to here.