View allAll Photos Tagged pickup

Leica MP, Summar5cmF2

 

Ford Econoline pickups were built from 1961 to 1967.

"The original Econoline series (van and pickup) was based on the compact Ford Falcon model. Unibody construction allowed the truck to be light, as the body also functioned as the frame, to which the running gear was attached. Up front an I-Beam axle was used, suspended by leaf springs. With a curb-weight of about 2,500 pounds, power-steering wasn't really needed and never offered.

 

The cab-over design required the motor to sit over the front axle, which made the truck front-heavy. To offset this, a 165-pound weight was mounted underneath the truck over the rear wheels. Inside, the driver and passenger sat above the front wheels, sharing the interior with the engine, which sat in a "doghouse" between the seats underneath an insulated cover. The steering column stood up nearly vertical from the floor, and held the three-speed manual shifter." classic-car-history.com

1990 Nissan PickUp (2.5 D 88 hp) at Nevers

Here is an updated version of the orange Speed Champions utility services pickup

Saw this pickup truck on a road trip around New Zealand. Had to stop and take a snap.

Red 1937 Ford Pickup - 878 YUW - seen at the 42nd Scottish Borders Historic Motoring Extravaganza, held at Thirlestane Castle, Lauder, Scotland, June 2014.

 

Any extra information will be gratefully received.

 

I've added this to some classic car groups and hope the term "car" might be interpreted flexibly in this instance!

 

www.bvac.org.uk/

 

Press "L" to view large.

I decided that my yellow '32 Ford Pickup build from 2012/13 needed a revamp, but I ended up with something completely different. This is the 2nd iteration; the first had an oversized blower & grille that didn't look too right, so I reworked the entire front end using a few of Calin's insanely inventive techniques. Cabin is just over 5 studs wide.

 

Top of engine technique:

flic.kr/p/VssLQq

 

Inverted grille technique:

flic.kr/p/uAPfSY

Illustration of a gasser pickup drag racer based on a vintage 1950s truck. I created this digitally.

Nikon FM2 | Lomography ISO 100

Marshall, NC - Madison County

© 2010

 

"Hate to be so emotional.

I didn't mean to get physical."

 

KoL - Pickup Truck

[flickr playlist]

    

Beautiful Candy Apple Green custom Chevy pickup.

The idea of a Hudson truck may not seem right, it appears they sold a lot of these and so many of them still exist and have been restored.

 

Seen in the main building among the many museums of the Gilmore in west Michigan.

WCK Cruisin Nationals

Duke's - Yorba Linda, CA

 

PLEASE VIEW LARGE

A modified "post apocalypse" pickup truck that I actually started working on in January of this year, and included it in the ApocaLEGO display at BrickFair 09. Inspired by the movie Death Race.

billetproof antioch

The Customer Service counter, now known as "Pickup & Services", is one of the most dramatically changed areas of the store, and also one of the most difficult to photograph since people are swarming around it constantly. Instead of doing a before and after (for a change!), this previously posted photo from late June 2015 shows what it looked like prior to the remodel.

____________________________________

Walmart Neighborhood Market, 2002-built, Goodman Rd. at Hurt Rd., Horn Lake MS

Ford pickup truck in primer.

Olean, NY. August 2018.

------------------------------------------------------------------------------------------

If you would like to use THIS picture in any sort of media elsewhere (such as newspaper or article), please send me a Flickrmail or send me an email at natehenderson6@gmail.com

2008 Atlantic Nationals, Centennial Park, Moncton, New Brunswick, Canada, July 2008

 

Camera: Olympus E500 & Zukko 14-45 lens

 

kenmo.fineartamerica.com/

kenmo.zenfolio.com/

Seen at the 2017 Shades of the Past Hot Rod Roundup.

 

Chevrolet Pickup

Appears there is sealant on the patina of this ride. Still, a '54 Chevy pickup in the wild is cool to see.

Clearly, trucks are my forte among minifig scale automobiles. This one started life with the intention of just extrapolating my farm truck. I wanted to try a different hood, though. Ultimately, this forced the inner structure in some different directions, so other than the wheelbase and front grill, it was mostly re-engineered.

France : 1980 - 1993

Argentina : 1993 - 1999

The model pictured here is an Argentinian production, recognizable to its plastic front bumpers. Sales in France ended in 1996, so the three last years, all the pickups were imported from Argentina.

After 1999, production was transferred to Kenya until 2001, and then Nigeria when it ended in 2005.

The Ford Ranger is a compact pickup truck that was manufactured and marketed by Ford Motor Company between 1982 and 2011 for the 1983 to 2012 model years. Introduced as a replacement for the Mazda-produced Ford Courier sold from 1971 to 1982, the Ranger was produced in three generations. Introduced a year after the Chevrolet S-10, the Ranger would go on to become the best-selling compact truck in the United States from 1987 to 2004.

 

Production of the Ranger was sourced from three different assembly plants. Twin Cities Assembly Plant in St. Paul, Minnesota produced the Ranger for its entire model run; the last vehicle produced at Twin Cities Assembly was the final 2012 Ford Ranger. But from 1983 to 1999, production was supplemented at Louisville Assembly Plant in Louisville, Kentucky and from 1993 to 2004, Edison Assembly in Edison, New Jersey.

 

Although Ford began to use the Ranger name on all compact trucks worldwide starting in 1998, global export of the North American version was primarily limited to South America, including Argentina, Brazil, and Chile; South American versions of the Ranger were produced in Argentina from 1998 to 2012.

 

Rebadged variants of the second-generation Ford Ranger were marketed by Mazda as the B-Series with Mazda using engine displacement for their model designation: the B2500 had the 2.5-liter inline-four engine and the B4000 has a 4.0-liter V6. For 2002, the B-Series was renamed to simply Mazda Truck in the United States.

 

Second generation

1992–1997

 

The redesign in 1992 for 1993 featured mild restyling, flush-mounted door glass, wider doors, and slight fender flares. The 1989-style dashboard remained, but the seats and door panels were new. The 2.9-liter engine was discontinued. For the first time, every model was produced with a flareside bed. The engines offered were offered in displacements of 2.3-, 3.0- and a 4.0 liters. The Mazda M5OD-R1 was now the sole manual transmission option. A new "Splash" model was introduced, which had a flare side bed, unique chrome wheels, 1 inch (25 mm) lowered rear suspension and a 2 inch lowered front suspension (on 4x2 models), and special vinyl "Splash" decals on the sides and the tailgate.

 

The 1993 Splash trim level was offered with regular cab in arctic white, gloss black, red orange, and sky blue. The Mazda B-Series became a re-badged Ranger for the 1994 model year, but the Mazda B-Series did not offer an equivalent to the Splash model. While 1993 Rangers used R-12 Freon, 1994 model year saw the transition to CFC-free air-conditioning systems in compliance with the Clean Air Act. For the 1994 model year, the Splash trim had options which all included; a 1 in (25 mm) lowered rear suspension and 2 inch lowered front suspension (on 4x2 models), flare side bed, an extended cab, and unique chrome wheels. The decals also underwent subtle changes. While the 1993–1994 models sported red, yellow and blue stripes, the 1995–1996 models had lime green stripes. Additionally, the available colors for the Splash model changed from the 1993–1994 models to the 1995–1997 models. The latter were offered in Maroon Red, Gloss black, White, and Canary Yellow.

 

Ford Ranger jump seat open

Fall 1994 production (1995 model year) included a steering wheel modified to include a driver's side airbag and a redesigned dashboard which included a double DIN radio head unit. Also for 1995 (model year), SuperCab trucks could have a power driver's seat. The A4LD transmission was updated. 2.3 L and 3.0 L models got the 4R44E, while 4.0 L trucks got the 4R55E. The front brakes were changed to use the same 2-piston brake calipers as the second-generation Explorer, and four-wheel anti-lock brakes were added as standard on 4x4 and 4.0 L models. From October 1995 (1996 model year), an optional passenger airbag (the first compact truck to offer one) became available, with a key-operated cutoff switch that allowed the airbag to be turned off for smaller passengers riding in the front seat. In October 1996, the 1997 model year brought in the first ever five-speed automatic transmission to be used by an American manufacturer. The 4.0-liter models were equipped with the 5R55E, while the 3.0-liter was still mated to the 4R44E.

 

[Text from Wikipedia]

 

en.wikipedia.org/wiki/Ford_Ranger_(North_America)

 

This miniland-scale Lego Ford Ranger X Cab Pickup (1996 - North America Offroad Custom) has been created for Flickr LUGNuts' 92nd Build Challenge, - "Stuck in the 90's", - all about vehicles from the decade of the 1990s.

 

This model was a 'By Request' offered up by Lino, for a Ford 1996 Ranger customised to the gills. I chose for this model to present the vehicle as specified by a recreational offroad enthusiast (not hardcore). and also presented in the style of the original 'Model Team' Lego models.

Old pickup in an abandoned scrapyard

Biarritz (France)

A 1941 Ford Pickup at the 2025 BCHRA Car & Truck show at the Elements Casino in Cloverdale, BC.

A mid 60s Ford long box pickup. Seen in Helena,Montana.

1 2 ••• 11 12 14 16 17 ••• 79 80