View allAll Photos Tagged base
La "Rumana" de COMSA (060-DA-001) descansa en la Base Madrid Sur de Villaverde con un corte de tolvas con balasto.
16.1.2011
Pentax 645nII. Fuji Acros Film.
Image ©Philip Krayna, BoxxCarr, all rights reserved. This image is not in the public domain. Please contact me for permission to download, license, reproduce, or otherwise use this image, or to just say “hello”. I value your input and comments. See more at www.boxxcarr.com.
The Transamerica Pyramid rises here with a clarity that still feels quietly radical. Seen from the street, its geometry does the work: a disciplined taper, a relentless grid of windows, and a structural logic that reads cleanly even at full height. This view anchors the building where it meets the city—trees, pavement, and the human-scaled threshold—before letting the eye climb, uninterrupted, toward the pale San Francisco sky.
Designed to be read as much as experienced, the Pyramid rewards this straight-on, ground-up vantage. The repeating window bays become a measured rhythm rather than texture, emphasizing proportion over ornament. The flared base—often overlooked—reveals its role as a mediator between monument and neighborhood, opening space at street level while supporting the tower’s unmistakable silhouette above.
What’s striking today is how contemporary the building still feels. Against softer glass towers nearby, the Pyramid’s concrete discipline and precise geometry assert a different kind of confidence—less about spectacle, more about intent. The softened light here brings out subtle tonal shifts in the façade, while the trees frame the structure without competing with it, reinforcing a sense of calm rather than scale alone.
In a city defined by constant reinvention, the Transamerica Pyramid remains a fixed point of orientation—geographic, architectural, and emotional. It doesn’t ask for attention. It earns it, simply by standing exactly where it is, doing exactly what it was designed to do.
This was taken on Greenwich Ave & W 12th.
***************
This set of photos is based on a very simple concept: walk every block of Manhattan with a camera, and see what happens. To avoid missing anything, walk both sides of the street.
That's all there is to it …
Of course, if you wanted to be more ambitious, you could also walk the streets of Brooklyn, Queens, Staten Island, and the Bronx. But that's more than I'm willing to commit to at this point, and I'll leave the remaining boroughs of New York City to other, more adventurous photographers.
Oh, actually, there's one more small detail: leave the photos alone for a month -- unedited, untouched, and unviewed. By the time I actually focus on the first of these "every-block" photos, I will have taken more than 8,000 images on the nearby streets of the Upper West Side -- plus another several thousand in Rome, Coney Island, and the various spots in NYC where I traditionally take photos. So I don't expect to be emotionally attached to any of the "every-block" photos, and hope that I'll be able to make an objective selection of the ones worth looking at.
As for the criteria that I've used to select the small subset of every-block photos that get uploaded to Flickr: there are three. First, I'll upload any photo that I think is "great," and where I hope the reaction of my Flickr-friends will be, "I have no idea when or where that photo was taken, but it's really a terrific picture!"
A second criterion has to do with place, and the third involves time. I'm hoping that I'll take some photos that clearly say, "This is New York!" to anyone who looks at it. Obviously, certain landscape icons like the Empire State Building or the Statue of Liberty would satisfy that criterion; but I'm hoping that I'll find other, more unexpected examples. I hope that I'll be able to take some shots that will make a "local" viewer say, "Well, even if that's not recognizable to someone from another part of the country, or another part of the world, I know that that's New York!" And there might be some photos where a "non-local" viewer might say, "I had no idea that there was anyplace in New York City that was so interesting/beautiful/ugly/spectacular."
As for the sense of time: I remember wandering around my neighborhood in 2005, photographing various shops, stores, restaurants, and business establishments -- and then casually looking at the photos about five years later, and being stunned by how much had changed. Little by little, store by store, day by day, things change … and when you've been around as long as I have, it's even more amazing to go back and look at the photos you took thirty or forty years ago, and ask yourself, "Was it really like that back then? Seriously, did people really wear bell-bottom jeans?"
So, with the expectation that I'll be looking at these every-block photos five or ten years from now (and maybe you will be, too), I'm going to be doing my best to capture scenes that convey the sense that they were taken in the year 2013 … or at least sometime in the decade of the 2010's (I have no idea what we're calling this decade yet). Or maybe they'll just say to us, "This is what it was like a dozen years after 9-11".
Movie posters are a trivial example of such a time-specific image; I've already taken a bunch, and I don't know if I'll ultimately decide that they're worth uploading. Women's fashion/styles are another obvious example of a time-specific phenomenon; and even though I'm definitely not a fashion expert, I suspected that I'll be able to look at some images ten years from now and mutter to myself, "Did we really wear shirts like that? Did women really wear those weird skirts that are short in the front, and long in the back? Did everyone in New York have a tattoo?"
Another example: I'm fascinated by the interactions that people have with their cellphones out on the street. It seems that everyone has one, which certainly wasn't true a decade ago; and it seems that everyone walks down the street with their eyes and their entire conscious attention riveted on this little box-like gadget, utterly oblivious about anything else that might be going on (among other things, that makes it very easy for me to photograph them without their even noticing, particularly if they've also got earphones so they can listen to music or carry on a phone conversation). But I can't help wondering whether this kind of social behavior will seem bizarre a decade from now … especially if our cellphones have become so miniaturized that they're incorporated into the glasses we wear, or implanted directly into our eyeballs.
Oh, one last thing: I've created a customized Google Map to show the precise details of each day's photo-walk. I'll be updating it each day, and the most recent part of my every-block journey will be marked in red, to differentiate it from all of the older segments of the journey, which will be shown in blue. You can see the map, and peek at it each day to see where I've been, by clicking on this link
URL link to Ed's every-block progress through Manhattan
If you have any suggestions about places that I should definitely visit to get some good photos, or if you'd like me to photograph you in your little corner of New York City, please let me know. You can send me a Flickr-mail message, or you can email me directly at ed-at-yourdon-dot-com
Stay tuned as the photo-walk continues, block by block ...
In a picture only possible during the lightest months of the year, Alpine Travel Leyland Olympian / Alexander G230 VWL heads away from Rhyl Depot to take up a school contract. The bus was new to the Oxford Bus Company but was acquired from ARRIVA The Shires.
Mikoyan-Gurevich MiG-29GT (former East German MiG-29UB upgraded to NATO standards) 4110 (cn N50903006448) Polish Air Force (Siły Powietrzne), 41.elt (41st squadron) based at Malbork 22.BLT (22nd Tactical Air Base or 22. Baza Lotnicza), taxiing back to the platform at Malbork Air Base (pic 7718).
The MiG-29 in the Polish Air Force
The first 12 MiG-29 (nine MiG-29As, three MiG-29UB) were delivered to Poland in 1989–1990. In 1995–1996, 10 used examples were acquired from the Czech Republic (nine MiG-29As, one MiG-29UB). Of the 22 MiG-29s Poland received from the German Air Force in 2004, a total of 14 of these were overhauled and taken into service. Currently (end of 2015) the Polish Air Force has 32 MiG-29s in its inventory. In 2011 the Polish Air Force awarded a contract to the WZL 2 company to modernise its MiG-29 fleet to be compatible with Polish F-16s.
Source: www.scramble.nl , en.wikipedia.org/wiki/Mikoyan_MiG-29 , en.wikipedia.org/wiki/Polish_Air_Force
A signal base from the former Chicago, Aurora and Elgin Railroad remains along the Elgin Branch of the Illinois Prairie Path near Lincoln Marsh in Wheaton, Illinois.
Olympus E-500, Olympus 18-180, ISO 100, f/5.0, 33mm, 1/100s
Taken in Fairmount, Indiana on a Nikon FE with a 28-85 f3.5-4.5 lens. Shot on Lomo Berlin Kino film and developed in ID11 stock.
Manhattan 2033
It's like yesterday the earthquake came and distroyed most of the city. It was like hell, death people everywhere. But there were survivors. At least, that how you could say it. We thought it was over when the earthquake stoped. But I am one of the few that know what happened that day. Yes, the earthquake was a disaster, but that's not the only thing that happened. When we got hit, a very dangerous gas came out of the ground. And it turned people into,.... ZOMBIES! So almost all the survivors turned into disgusting little zombies. Only a few are immune to it. I am, and so is my best friend. Be got ourselves a nice base, same for zombies, at least, what you can call save. Our mission is to survive, and survive we will.
----------------------------------------------------------------------------------------------------------------------------------
Ok, so the idea behind this one is basicaly the same as the previous one, but It does look a bit different. Some things I like more, others not. Please tell me if you like this one more or Consequenses of War.
Aslo this is an entry for the Zombie contest over at the LCN!
And thank you Julien for editing this one!
Previous Apoc moc
Consequenses of War:
www.flickr.com/photos/51675614@N05/6100227283/in/photostr...
Thanks, Daan.
Peaky Blinders is a beautiful countryside based in England, where you can rent a home or a store, even a gacha stall, brilliant community base. There is so much to explore, from Pubs to farms, to even a church where we have weddings! We have events daily, such as open mic nights, Karaoke, Quiz, and family events. Our main goal is to make everyone feel welcomed, and just have fun!! Visit us at: maps.secondlife.com/secondlife/Eclipsed/6/115/42
Once the tower was opened, we were able to get right up to it and climb the stairs inside to the top. Photos available for purchase at Wits End Photography. Follow my blog Traveling at Wits End for ways to create travel adventures everyday.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The TIE/LN starfighter, or TIE/line starfighter, simply known as the TIE Fighter or T/F, was the standard Imperial starfighter seen in massive numbers throughout most of the Galactic Civil War and onward.
The TIE Fighter was manufactured by Sienar Fleet Systems and led to several upgraded TIE models such as TIE/sa bomber, TIE/IN interceptor, TIE/D Defender, TIE/D automated starfighter, and many more.
The original TIEs were designed to attack in large numbers, overwhelming the enemy craft. The Imperials used so many that they came to be considered symbols of the Empire and its might. They were also very cheap to produce, reflecting the Imperial philosophy of quantity over quality.
However, a disadvantage of the fighter was its lack of deflector shields. In combat, pilots had to rely on the TIE/LN's maneuverability to avoid damage. The cockpit did incorporate crash webbing, a repulsorlift antigravity field, and a high-g shock seat to help protect the pilot, however these did next to nothing to help protect against enemy blaster fire.
Due to the lack of life-support systems, each TIE pilot had a fully sealed flight suit superior to their Rebel counterparts. The absence of a hyperdrive also rendered the light fighter totally dependent on carrier ships when deployed in enemy systems. TIE/LNs also lacked landing gear, another mass-reducing measure. While the ships were structurally capable of "sitting" on their wings, they were not designed to land or disembark their pilots without special support. On Imperial ships, TIEs were launched from racks in the hangar bays.
The high success rate of more advanced Rebel starfighters against standard Imperial TIE Fighters resulted in a mounting cost of replacing destroyed fighters and their pilots. That, combined with the realization that the inclusion of a hyperdrive would allow the fleet to be more flexible, caused the Imperial Navy to rethink its doctrine of using swarms of cheap craft instead of fewer high-quality ones, leading to the introduction of the TIE Advanced x1 and its successor, the TIE Avenger. The following TIE/D Defender as well as the heavy TIE Escort Fighter (or TIE/E) were touted as the next "logical advance" of the TIE Series—representing a shift in starfighter design from previous, expendable TIE models towards fast, well armed and protected designs, capable of hyperspace travel and long-term crew teams which gained experience and capabilities over time.
The TIE/E Escort, was a high-performance TIE Series starfighter developed for the Imperial Navy by Sienar Fleet Systems and it was introduced into service shortly before the Battle of Endor. It was a much heavier counterpart to the agile and TIE/D fighter, and more of an attack ship or even a light bomber than a true dogfighter. Its role were independent long range operations, and in order to reduce the work load and boost morale a crew of two was introduced (a pilot and a dedicated weapon systems officer/WSO). The primary duty profile included attack and escort task, but also reconnoiter missions. The TIE/E shared the general layout with the contemporary TIE/D fighter, but the cockpit section as well as the central power unit were much bigger, and the ship was considerably heavier.
The crew enjoyed – compared with previous TIE fighter designs – a spacious and now fully pressurized cockpit, so that no pressurized suits had to be worn anymore. The crew members sat in tandem under a large, clear canopy. The pilot in front had a very good field of view, while the WSO sat behind him, in a higher, staggered position with only a limited field of view. Both work stations had separate entries, though, and places could not be switched in flight: the pilot mounted the cockpit through a hatch on port side, while the WSO entered the rear compartment through a roof hatch.
In a departure from the design of previous TIE models, instead of two parallel wings to either side of the pilot module, the TIE Escort had three quadanium steel solar array wings mounted symmetrically around an aft section, which contained an I-s4d solar ionization reactor to store and convert solar energy collected from the wing panels. The inclusion of a third wing provided additional solar power to increase the ship's range and the ship's energy management system was designed to allow weapons and shields to be charged with minimum loss of power to the propulsion system.
Although it was based on the standard twin ion engine design, the TIE/E’s propulsion system was upgraded to the entirely new, powerful P-sz9.8 triple ion engine. This allowed the TIE/E a maximum acceleration of 4,220 G or 21 MGLT/s and a top speed of 144 MGLT, or 1,680 km/h in an atmosphere — almost 40 percent faster than a former standard TIE Fighter. With tractor beam recharge power (see below) redirected to the engines, the top speed could be increased to 180 MGLT in a dash.
In addition to the main thrusters located in the aft section, the TIE Escort's triple wing design allowed for three arrays of maneuvering jets and it featured an advanced F-s5x flight avionics system to process the pilot's instructions. Production models received a class 2, ND9 hyperdrive motivator, modified from the version developed for the TIE Avenger. The TIE/E also carried a Sienar N-s6 Navcon navigation computer with a ten-jump memory.
Special equipment included a small tractor beam projector, originally developed for the TIE Avenger, which could be easily fitted to the voluminous TIE Escort. Models produced by Ysanne Isard's production facility regularly carried such tractor beams and the technology found other uses, such as towing other damaged starfighters until they could achieve the required velocity to enter hyperspace. The tractor beam had limited range and could only be used for a short time before stopping to recharge, but it added new tactics, too. For instance, the beam allowed the TIE/E crews to temporarily inhibit the mobility of enemy fighters, making it easier to target them with the ship's other weapon systems, or prevent enemies from clear shots.
The TIE Escort’s weapons systems were primarily designed to engage bigger ships and armored or shielded targets, like armed freighters frequently used by the Alliance. Thanks to its complex weapon and sensor suite, it could also engage multiple enemy fighters at once. The sensors also allowed an effective attack of ground targets, so that atmospheric bombing was a potential mission for the TIE/E, too.
.
The TIE Escort Fighter carried a formidable array of weaponry in two modular weapon bays that were mounted alongside the lower cabin. In standard configuration, the TIE/E had two L-s9.3 laser cannons and two NK-3 ion cannons. The laser and ion cannons could be set to fire separately or, if concentrated power was required, to fire-linked in either pairs or as a quartet.
The ship also featured two M-g-2 general-purpose warhead launchers, each of which could be equipped with a standard load of three proton torpedoes or four concussion missiles. Depending on the mission profile, the ship could be fitted with alternative warheads such as proton rockets, proton bombs, or magnetic pulse warheads.
Additionally, external stores could be carried under the fuselage, which included a conformal sensor pallet for reconnaissance missions or a cargo bay with a capacity for 500 kg (1.100 lb).
The ship's defenses were provided by a pair of forward and rear projecting Novaldex deflector shield generators—another advantage over former standard TIE models. The shields were designed to recharge more rapidly than in previous Imperial fighters and were nearly as powerful as those found on capital ships, so that the TIE/E could engage other ships head-on with a very high survivability. The fighters were not equipped with particle shields, though, relying on the reinforced titanium hull to absorb impacts from matter. Its hull and wings were among the strongest of any TIE series Starfighter yet.
The advanced starfighter attracted the attention of several other factions, and the Empire struggled to prevent the spread of the technology. The ship's high cost, together with political factors, kept it from achieving widespread use in the Empire, though, and units were assigned only to the most elite crews.
The TIE/E played a central role in the Empire's campaign against rogue Grand Admiral Demetrius Zaarin, and mixed Defender and Escort units participated in several other battles, including the Battle of Endor. The TIE Escort continued to see limited use by the Imperial Remnant up to at least 44 ABY, and was involved in numerous conflicts, including the Yuuzhan Vong War..
The kit and its assembly:
Another group build contribution, this time to the Science Fiction GB at whatifmodelers.com during summer 2017. Originally, this one started as an attempt to build a vintage MPC TIE Interceptor kit which I had bought and half-heartedly started to build probably 20 years ago. But I did not have the right mojo (probably, The Force was not strong enough…?), so the kit ended up in a dark corner and some parts were donated to other projects.
The sun collectors were still intact, though, and in the meantime I had the idea of reviving the kit’s remains, and convert it into (what I thought was) a fictional TIE Fighter variant with three solar panels. For this plan I got myself another TIE Interceptor kit, and stashed it away, too. Mojo was still missing, though.
Well, then came the SF GB and I took it as an occasion to finally tackle the build. But when I prepared for the build I found out that my intended design (over the years) more or less actually existed in the Star Wars universe: the TIE/D Defender! I could have built it with the parts and hand and some improvisation, but the design similarity bugged me. Well, instead of a poor copy of something that was more or less clearly defined, I rather decided to create something more individual, yet plausible, from the parts at hand.
The model was to stay a TIE design, though, in order to use as much donor material from the MPC kits as possible. Doing some legwork, I settled for a heavy fighter – bigger than the TIE Interceptor and the TIE/D fighter, a two-seater.
Working out the basic concept and layout took some time and evolved gradually. The creative spark for the TIE/E eventually came through a Revell “Obi Wan’s Jedi Starfighter” snap fit kit in my pile – actually a prize from a former GB participation at phoxim.de (Thanks a lot, Wolfgang!), and rather a toy than a true model kit.
The Jedi Fighter was in so far handy as it carries some TIE Fighter design traits, like the pilot capsule and the characteristic spider web windscreen. Anyway, it’s 1:32, much bigger than the TIE Interceptor’s roundabout 1:50 scale – but knowing that I’d never build the Jedi Starfighter OOB I used it as a donor bank, and from this starting point things started to evolve gradually.
Work started with the cockpit section, taken from the Jedi Starfighter kit. The two TIE Interceptor cockpit tubs were then mounted inside, staggered, and the gaps to the walls filled with putty. A pretty messy task, and once the shapes had been carved out some triangular tiles were added to the surfaces – a detail I found depicted in SW screenshots and some TIE Fighter models.
Another issue became the crew – even though I had two MPC TIE Interceptors and, theorectically, two pilot figures, only one of them could be found and the second crewman had to be improvised. I normally do not build 1:48 scale things, but I was lucky (and happy) to find an SF driver figure, left over from a small Dougram hoovercraft kit (from Takara, as a Revell “Robotech” reboxing). This driver is a tad bigger than the 1:50 TIE pilot, but I went with it because I did not want to invest money and time in alternatives. In order to justify the size difference I decided to paint the Dougram driver as a Chiss, based on the expanded SW universe (with blue skin and hair, and glowing red eyes). Not certain if this makes sense during the Battle of Endor timeframe, but it adds some color to the project – and the cockpit would not be visible in much detail since it would be finished fully closed.
Reason behind the closed canopy is basically the poor fit of the clear part. OOB, this is intended as an action toy – but also the canopy’s considerable size in 1:50 would prevent its original opening mechanism.
Additional braces on the rel. large window panels were created with self-adhesive tape and later painted over.
The rear fuselage section and the solar panel pylons were scratched. The reactor behind the cockpit section is actually a plastic adapter for water hoses, found in a local DIY market. It was slightly modified, attached to the cockpit “egg” and both parts blended with putty. The tail opening was closed with a hatch from the OOB TIE Interceptor – an incidental but perfect match in size and style.
The three pylons are also lucky finds: actually, these are SF wargaming/tabletop props and would normally be low walls or barriers, made from resin. For my build, they were more or less halved and trimmed. Tilted by 90°, they are attached to the hull with iron wire stabilizers, and later blended to the hull with putty, too.
Once the cockpit was done, things moved more swiftly. The surface of the hull was decorated with many small bits and pieces, including thin styrene sheet and profiles, steel and iron wire in various strengths, and there are even 1:72 tank tracks hidden somewhere, as well as protective caps from syringes (main guns and under the rear fuselage). It’s amazing how much stuff you can add to such a model – but IMHO it’s vital in order to create some structure and to emulate the (early) Star Wars look.
Painting and markings:
The less spectacular part of the project, even though still a lot of work because of the sheer size of the model’s surface. Since the whole thing is fictional, I tried to stay true to the Imperial designs from Episode IV-VI and gave the TIE/E a simple, all-light grey livery. All basic painting was done with rattle cans.
Work started with a basic coat of grey primer. On top of that, an initial coat of RAL 7036 Platingrau was added, esp. to the lower surfaces and recesses, for a rough shading effect. Then, the actual overall tone, RAL 7047, called “Telegrau 4”, one of Deutsche Telekom’s corporate tones, was added - mostly sprayed from abone and the sides onto the model. Fuselage and panels were painted separately, overall assembly was one of the final steps.
The solar panels were to stand out from the grey rest of the model, and I painted them with Revell Acrylic “Iron Metallic” (91) first, and later applied a rather rich wash with black ink , making sure the color settled well into the many small cells. The effect is pretty good, and the contrast was slightly enhanced through a dry-brushing treatment.
Only a few legible stencils were added all around the hull (most from the scrap box or from mecha sheets), the Galactic Empire Seal were inkjet-printed at home, as well as some tactical markings on the flanks, puzzled together from single digits in "Aurebash", one of the Imperial SW languages/fonts.
For some variety and color highlights, dozens of small, round and colorful markings were die-punched from silver, yellow, orange, red and blue decal sheet and were placed all over the hull - together with the large panels they blur into the the overall appearance, though. The hatches received thin red linings, also made from generic decals strips.
The cockpit interior was a bit challenging, though. Good TIE Fighter cockpit interior pictures are hard to find, but they suggest a dark grey tone. More confusingly, the MPC instructions call for a “Dark Green” cockpit? Well, I did not like the all-grey option, since the spaceship is already monochrome grey on the outside.
As a compromise I eventually used Tamiya XF-65 "Field Grey". The interior recieved a black ink in and dry-brushing treatment, and some instruments ansd screens were created with black decal material and glossy black paint; some neon paint was used for sci-fi-esque conmtraol lamps everywhere - I did not pay too much intention on the interior, since the cockpit would stay closed, and the thick clear material blurs everything inside.
Following this rationale, the crew was also painted in arather minimal fashion - both wear a dark grey uniform, only the Chiss pilot stands aout with his light blue skin and the flourescent red eyes.
After an overall black ink wash the model received a dry brusing treatment with FS 36492 and FS 36495, for a weathered and battle-worn look. After all, the "Vehement" would not survive the Ballte of Endor, but who knows what became of TIE/E "801"'s mixed crew...?
Finally, the kit was sealed with matt acrylic varnish, and some final cosmetic corrections made.
The display is a DIY creation, too, made from a 6x6" piece of wood, it's edges covered with edgebonder, a steel wire as holder, and finally the display was paited with semi-matt black acrylic paint from the rattle can.
A complex build, and the TIE/E more or less evolved along the way, with only the overall layout in mind. Work took a month, but I think it was worth the effort. This fantasy creation looks pretty plausible and blends well into the vast canonical TIE Fighter family - and I am happy that I finally could finish this mummy project, including the surplus Jedi Starfighter kit which now also find a very good use!
An epic one, and far outside my standard comfort zone. But a wothwhile build!
The Buffalo was one of the first U.S. monoplanes with an arrestor hook and other modifications for aircraft carriers. It won a competition against the Grumman F4F Wildcat in 1939 to become the U.S. Navy's first monoplane fighter aircraft.
(Source : Wikipedia)
A C-130J Super Hercules prepares to drop a container deployment system during a flying training deployment July 16, 2013, in Plovdiv, Bulgaria. FTD Thracian Summer is an opportunity for American and Bulgarian forces to train together and learn how each other perform their mission. (U.S. Air Force photo by Airman 1st Class Trevor Rhynes)
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background
The history of Focke Wulf's Fw 190 in Japan started with a rejection: in 1943 a single FW 190 A-5 had been supplied to Japan for evaluation, but at first, the type was not put into production by the Japanese. Anyway, the results of the study by Japanese engineers were incorporated in the design of the Ki-61 fighter. This evaluation did not go unnoticed, since the type received the Allied code-name 'Fred'.
By that time, the teething development problems of Mitubishi's J2M ‘Raiden’ (Thunderbolt) 'Jack' led to a slowdown in production. Biggest issues were the Kasei engine, an unreliable propeller pitch change mechanism and the main undercarriage members. Another drawback of the type was that its design put emphasis on performance and pilot protection rather than maneuverability. By the time the Fw 190 was tested, only fourteen J2M had been completed.
To make matters even worse, the Mitsubishi A7M 'Reppu' fighter was also behind schedule, so that replacements for the A6M 'Zero', backbone of the IJN’s air force, were overdue.
This situation left the Imperial Japanese Navy without a land-based interceptor. The first few produced J2M2 were delivered to the development units in December 1942 but further trials and improvements took almost a year, and it took until June 1944 that the ‘Raiden’ could make its combat debut, during the Battle of the Philippine Sea.
While the Raiden was to be developed further for the high-altitude interceptor role, the IJN decided in January 1944 to adopt the highly effective Fw 190 as a supplementary interceptor for medium heights - only as a stop-gap at first, but the type quickly evolved into various sub-variants, much like in Germany.
License production of the adopted Fw 190 started at Hitachi in May 1944. The original airframe was modified to cater to Japanese needs and customs, and the most obvious difference of the J10F1, how the plane was officially called, was the use of the Mitsubishi MK4R Kasei 23c radial engine instead of the original BMW 801. It was a modified version of the engine in the J2M, but simplified and made more reliable. The engine produced 1.820hp and drove a four-bladed propeller. Another distinctive feature was a small fin fillet, which compensated directional instability due to the longer forward fuselage.
By its pilots, the J10F quickly became called “hueruge” (フエルゲル), a transcription of the Fw 190's German nickname "Würger" (=Shrike).
Variants:
J10F1
The original main variant with the MK4R Kasei 23e and armed with 2× 13.2 mm Type 3 machine guns and 4× 20 mm two Type 99 Model 2 cannons, 354 aircraft produced.
While no official sub-variant was developed or designated, single machines differed considerably in equipment. This included field-modifications like reduced armament for better performance or ground-attack equipment, e .g. racks for a total of four unguided 60kg air-to-air missiles under the outer wings.
J10F1-G
In late 1945 a few J10F1 were modified for the anti-ship role and night attacks, and they received the "-G" suffix for their new land-based bomber role. These planes had a reduced gun armament, flame dampers and an IR sight, similar to the German “Spanner” device.
Most of these planes were to carry special weapons, like a single indigenous Ke-Go 110 heat-seeking guided bomb under the belly, or, alternatively, a copy of the German Bv 246 "Hagelkorn" gliding bomb, which had been delivered to Japan in 1944 for tests and adopted for production. To allow more space under the fuselage while carrying these bombs on the ground, some of these aircraft had a longer tail wheel strut fitted. Additionally, tests were made with a torpedo on the centerline hardpoint. It is uncertain if these weapons were actually used in combat, though.
J10F2
The only variant that was developed so far that it entered service, incorporating many detail modifications and improvements. These included thicker armored glass in the cabin's windshield (from 5.5 cm/2.2” to 7.6cm/3”) and extra armor plating behind the pilot's seat. The wing skinning was thickened in localized areas to allow for a further increase in dive speed. A water-methanol engine boost was added, which allowed an engine output of 2.050 hp for short periods, which boosted the top speed to 695 km/h. 52 were produced.
J10F3
High altitude project with a pressurized cabin, a larger wing span of 11.96 m (39 ft 2 in) and a turbo-supercharged MK4R-C Kasei 23c engine, with the turbo-supercharger mounted behind the cockpit (itself made wider). This doubled the altitude at which the engine could produce its rated power, from 15,750ft up to 30,185ft. The J10F3 only carried two 20mm cannons in the wing roots, but had two extra oblique-firing 20mm cannon installed aft of the cockpit for use against high flying American B-29 bombers (much like the German "Schräge Musik" installments). Two prototypes were completed in June 1945, but the turbo-supercharger proved troublesome, and no further aircraft of this type were produced.
From late 1944 on, the J10F1 was quickly thrown into service and became a nasty surprise for Allied aircraft. The modified Focke Wulf design proved to be agile, fast and much tougher than earlier Japanese fighters, coupled with a relatively heavy armament. Beyond interception duties, the J10F1 was frequently employed in close support and anti-shipping tasks, since its low level handling and ordnance load was excellent.
Its only drawback was - as with the original Fw 190 - that performance dropped at heights above 6.000m. This should not have posed a problem with the J2M, but that type's delay left the Allied high-altitude bomber attacks relatively unharmed, so that the J10F3 version was hastily developed, but failed to realize. In Germany, the similar situation resulted in the Fw 190 D-9 variant and finally in the superb Ta-152.
J10F1General characteristics:
Crew: 1
Length: 9.29 m (30 ft 6¾ in)
Wingspan:10.51 m (34 ft 5 in)
Height: 3.95 m (12 ft 12 in)
Wing area:18.30 m² (196.99 ft²)
Empty weight: 3,490 kg (7,694 lb)
Max. take-off weight: 4,840 kg (10,670 lb)
Performance:
Maximum speed: 656 km/h (408 mph) at 19,420 ft (5,920 m)
Rate of climb:17 m/s (3,300 ft/min)
Range: 800 km (500 mi)
Service ceiling: 12,000 m (39,370 ft)
Engine: 1 Mitsubishi MK4R Kasei 23e radial engine with 1.820hp
Armament:
2 × 13.2 mm Type 3 machine guns, 300 rpg, in the nose
4 × 20 mm two Type 99 Model 2 cannons, 200 rpg, two in the wing roots, two outside of the landing gear.
Three hardpoints, one under the fuselage (max. 500 kg/1.102 lb) and one under each wing for 250 kg/550 lb each for bombs or fuel tanks. Total external ordnance load of 1.000kg (2.205 lb).
The kit and its assembly
The 'Japanese Fw 190' is a popular what-if topic, so I wanted to add my interpretation to the plethora of whifs and replicas of the real test machine. Actually, a clean Fw 190 looks pretty Japanese with its radial engine and sleek lines. When I recently came across a similar build at britmodelers.com, I thought that painting a Fw 190 green/grey and putting some Hinomarus on is logical and simple, but there's more in the subject than just cosmetics. I wanted a bit more... And while the concept remained simple, I had enough ideas and spare parts for a twin combo! In the end, the J10F was built as a pure interceptor and as a 'special purpose' night strike aircraft.
Basically, my limiting design idea for the J10F's design was the idea that Japan would not have received the Fw 190’s original BMW 801 radial engine, so that an alternative powerplant had to be fitted. I had hoped that this would have set the 'new' plane outwardly a bit apart from its German ancestor, and also make you look twice because the result would not be a 1:1 "Japanized" Fw 190 A/F. I tried, but I suppose that the effect is not as 'powerful' as intended – but judge for yourself?
The basic kits for both conversions come from Hobby Boss. It is a simple and clean kit, but with very good fit and engraved details. In an attempt to change the plane's look a little, I tried to transplant other engines - radials, too. Donation parts for both kits come from an Italeri Ju 188, which features two pairs of engines. The radials I used are actually BMW 801’s, too, but they lack the typical cooling fan and the cowlings are 3-4mm longer because they'd carry the engine mountings on the Ju 188's wings. Actually, the fuselage is minimal longer now, maybe 4-5mm, but the shape is still very close to the original Fw 190, so I think that this mod hardly is recognizable at all?
The change was a bit tricky, due to the massive fuselage of the Hobby Boss kit, but it worked. The new cowlings received new cooling louvres and exhaust pipes. New, four-bladed propellers were added, scratch-built from leftover Mosquito NF.30 propellers from the Airfix kit and drop tank front halves.
Otherwise, though, not much was changed, the two kits just differ in equipment details and received Matchbox pilot figures in order to cover up the bleak and very deep cockpit.
The interceptor:
As an interceptor I left the plane clean, without external ordnance. I wanted to emphasize its elegant look, which makes it look like a Ki-43 on casual glance, or even an A6M. The plane carries the normal gun armament (from a Fw 190 A-8), this is supposed to be the original/standard J10F mentioned above.
The night attacker:
The J10F1-G variant saw more modifications, including a new exhaust system with flame dampers built from scratch. Other special equipment comprises an IR sight in front of the canopy, flare protectors, the fuselage hardpoint and the scratch-built Ke-Go 110 bomb. In order to cover the deleted gun access panels under the wings, I added streamlined bomb shackles for two Japanese 60kg bombs each, donated from a Matchbox Ju 87 kit.
About the Ke-Go bomb
This bomb, which looks like a penguin, is a fantasy derivate of a real Japanese development series until summer 1945. In a nutshell, the Ke-Go bomb actually was one of the first “fire and forget” weapons I have heard of. With the guidance of a bolometer seeker and a self-correcting steering mechanism, the bomb would (only) be useable against strong and clear heat sources – a ship’s kettle at night, when surrounding heat level was low, would qualify, and the bomb would be guided by deviation and correction from that heat source - if it locked on correctly, though! My Ke-Go 110 is a smaller version of the original Ke-Go bombs, suitable for lighter planes.
Painting
Being an IJN plane, paint scheme choices for the J10F were rather limited - and since it is a whif plane I stuck to my policy that I rather use a simple/subtle paint scheme.
The interceptor:
For the clean and rather conservative interceptor I settled for a simple IJN Green/Gray livery (N. 2 ‘Aomidori-iro’, a bluish, very dark green and N.10 ‘Hairyokushoku’, respectively), with Testors 2116 and 2117 as basic tones. Yellow wing leading edges were added, cut from an aftermarket decal sheet. As a design twist I painted the engine cowling black, A6M-style. The propeller spinner was painted in red brown (typical Japanese WWII primer color), with an orange tip, matching the arrow symbol decal on the tail fin. The propeller blades were painted with Testor’s ‘Rubber’, #1183.
A slightly worn look was achieved through a light wash with black ink and some dry painting with paler shades of Green (Humbrol 91 and 185) and Aluminum, plus light exhaust marks and gun smoke residues with flat black. Some bare metal spots were added, which also highlight some details and add to the worn look.
All decals for the green fighter come from a Hobby Boss A6M, only the arrows come from the Hobby Boss He 162. Finally, everything was sealed under a semi-matte varnish, for a light shine to the surface – typical IJN machines appear to be rather shiny?
The night attacker:
This variant received a more fantastic and stealthy paint scheme - I wanted to set the plane apart from the clean and shiny interceptor: a grunty, desperate strike aircraft against overwhelming sea forces.
AFAIK, there had not been specific nocturnal cammo schemes at the IJNAS, except for all-green aircraft? A bit boring, I thought, esp. with a typical green/gray sister plane.
So I made up a personal variant: In a first step, upper surfaces were painted in a brownish-grey basic tone, AFAIK called ‘Ameiro’ – it is the color which was used on early Zeroes which were based on carriers, and the tone faded quickly to a light gray. This color is very similar to RAL 7014 ‘Fenstergrau’ and reminds of B.S. ‘Hemp’. I improvised it with a mix of Humbrol 141 (60%), 83 (35%) and a bit of 155 (5%). On top of that a dense array of dark green blotches (Humbrol 185, Chrome Green, at first, and later also with Humbrol 116 for more contrast) was applied, breaking up the plane’s lines and covering the light gray tone almost completely.
Undersides originally sported ‘Ameiro’, too, but they were painted as if they had been covered with a very dark gray tone in the field (Humbrol 67), even leaving out the hinomarus and flaking off everywhere. The black engine cowling was retained.
Hinomaru and squadron emblems come from the same Mitsubishi A6M from Hobby Boss as mentioned above, featuring even less markings. As a side note: I have never seen Hinomaru with a black(!) rim before? I am not certain if this is correct or an authentic modification - it matches the night fighter role perfectly, though. This time I chose a matte varnish, except for the cowling which received some streaks with more shiny semi-matte varnish.
In both cases, cockpit interior surfaces and landing gear wells were painted in ‘Aodake Iro’, simulated with a base of Aluminium (Humbrol 56) and a coat of translucent blue lacquer on top.
All in all, these pair of rather simple model kit was built in a couple of days, taking the pictures and waiting for good light took almost the same time! I am not 100% happy, because the engine mod is not as obvious as I expected, even though the four-bladed prop and the slightly elongated fuselage give the J10F a menacing and fast look, like a “Baby Tempest”.
From thedailylumenbox.blog LomoChrome Turquoise shot at ISO 100 with Leica Ic and Voigtlander 15mm, Heliar Super Wide. Developed by The Darkroom in San Clemente, CA
This base was the most difficult to paint.....So many nooks and crannies.
However, the outcome was worth the frustration in my opinion.
Hope you guys like it.
Comments & criticism are welcome
-God Bless
Another shot courtesy of Flickr user m20wc51, taken in Korea in 1968-69 by Specialist Mueller. I don't quite know what we're seeing here, but other photos in the series seem to imply that five or six soldiers were brought by bus to this event, and Mueller thought it worth while to get shots of individual soldiers dismounting from the bus, followed by a group of shot of them lining up for whatever it was. One other shot appears to show them at tables enjoying a meal with the ladies. Note that the skin colour of the lady's legs is darker than her arms because she is probably wearing that new-fangled invention pantyhose. She also has a note-book and a pen, so she may be one of the organizers of this event, whatever it is.
The yellow plate on the bus tells us it is from Seoul area, and between the lights, two hanja (Chinese) characters and the hangeul characters to make an English word – 'beu-suh", that is, "bus."
Original shot can be found here for purposes of comparison. The shot was clean and only required minor detailing. Film stock unknown, but like a number of Mueller's shots, it fades down to emphasize the yellows and purples, with the blues tending to suffer.