View allAll Photos Tagged layout
Presenting a photoshoot of my full fleet collection of Tayside buses from the 1990’s to present day. Featuring representations of Tayside Public Transport Co. Travel Dundee, National Express (NatEx) Dundee, Xplore Dundee (initially NatEx, now McGills) and Tayside Greyhound (unrelated to Greyhound of Arbroath). The collection is a 50:50 split of Code 1 & 3 (out the box and altered/repaints) and represents both the stage fare service and coach fleet. Including; SK68 MBO, SP61 CTX, SP54 CHJ, also G199 EOG and two Code 3 Darts.
LR80 - Cheviot Hills & Kielder Water.
This diagram shows the layout of the triangulation pillars within the area covered by the Ordnance Survey Landranger (map) LR80, Cheviot Hills & Kielder Water.
──────────────────────────────
──────────────────────────────
Links to Triangulation station photographs:
S7497 - Dunion Hill (destroyed)
10862 - Whitelyne Common (Sighty Crag)
──────────────────────────────
While waiting for the release of the tracks I've been continuing to edit the layout to make the lines flow a lot better.
-I moved the passenger station into the interior loop to allow more space for the station building and allow a longer train
-Shifted the switches for the siding to better align to the stud grid.
-Redesigned the spaghetti mess of a junction in the top of the layout to make a more aesthetically pleasing flow
-Fixed the lines that'll go through the cut-through. as it is off of a switch on the angle it needed a 1.6 straight to match the parallel.
-Smoothed out the curves in the cut-through so that it isn't a staggered curve.
Once the large radius curves and partial straights come out I can begin the build just a looping layout while waiting for the switch tracks coming down the development pipeline.
While designing the layout there are a couple of "rules" that I have set for myself.
1. 2+ mainlines -The initiating factor for the redesign is to include multiple loops where I can run multiple trains at once.
2. The removal of R40 curves. -They are way to tight especially for scale models. The same goes for the standard switch tracks.
3. A train can go from any track loop to any track loop going in any direction. -I didn't want to have to reverse direction to change the loop that the train was running on.
4. I want a tunnel. -Years ago for the basic circle of a layout I had I had built a 16x32 tunnel with a 32x32 park integrated into the side. The tunnel arch was just the basic (*x2 and *x3) slope bricks with the inverted versions beneath. Now I want an actual hillside and a long curved tunnel.
5. Landscape -With the increased detail of the track I really should have something better then bare baseplates. So I'm designing elevated landscape with lakes, a creek, a hillside with a tunnel and a cut-through, a forest of trees, farm fields. I don't have enough room for a city/ town so buildings are minimal.
6. Interchangeability -It probably wont happen with the first design of the layout but a goal I have is to make the landscape be on easily removable plates so that I can change the seasons by just swapping them around. (Large sheets of landscape with support pillars tiled with minimal connection points)
7. Metal track -If not for 9v capabilities then for aesthetics. metal rails are a must. I missed ME rails during my dark age and so was very excited when I came across the announcement of FxBricks' track proposal.
As it sits currently the layout design is at the maximum size it can be. I want to use this a a test bed for future projects and eventually have a large landscaped layout with distinct separate towns, varying landscapes, the ability to have running session/ operations on the layout. This part is all quite speculative and years in the future.
I've completely reworked the hadware board. The basics remain the FPGA module Terasic, the DE0-Nano. This board contains a lot of I / O lines and is super fast. Everything is on a single-sided PCB. The output transistor drivers ( 20 pieces 500 mA/ 45V outputs ) are in SMD to save board space. The DE0-nano FPGA board is as a Peggy-back board mounted on ther driver PCB. Via the USB connector, the FPGA program can be re-written.
What does this interface:
* 20 open collector outputs via JP10 and JP11.
- Camera meter
- Camera shutter
- X1 flash1 signaal ( manual or TTL mode flash1)
- Q1 flash1 signaal ( TTL mode flash1 ) or X3 flash3 manual mode.
- X2 flash2 signaal ( manual or TTL mode flash2)
- Q2 flash2 signaal ( TTL mode flash2 ) or X4 flash4 manual mode.
- DIR steppen motor board.
- Step steppen motor board.
- Enable steppen motor board.
- 1 Spare output.
- 4 outputs used to drive the color background module. Via JP12
- 6 outputs used to drive the Cree foreground module. Via JP9
Enc1 connector:
2 inputs from a rotary encode frontplate. Used as general digital input value.
Enc2 connector:
2 inputs from a rotary encode frontplate. Used to move the step motor of the lineaire stage module in manual mode.
Range switch input
4 input switches to change the analog sensitivity range of the color pot meters.
Drive of the H-Bridge color shutter module:
- 6 direct FPGA outputs via JP13 and JP17.
Matrix 5X8 keyboard 40 pushbuttons. via JP14 and JP18.
LCD1 display 4X20 chars via JP16.
LCD2 display 4X20 chars via JP15.
4 I/O connectors via JP2 still no assigned function.
Connection via the general GPIO3 connector from the top of the FPGA DE-Nano board.
2x13 pins connected to JP5 and JP6.
8 analog inputs 12 bit resolution via JP8.
- 4 inputs are used for the color setting.
- 1 input used for the stepper speed
- 3 free analog inputs, no function now.
Logic analyser signals:
- 8 levels out the FPGA module via JP3.
Encoder and micro switches from the lineaire stage as feedback position via JP4.
- EncA.
- EncB.
- Enc home.
- min end switch.
- max end switch.
3 I/O connectors via JP1 still no assigned function.
Power 5V and 3.3V connectors.
Last update 2 feb 2015
Kitchen one of the most important rooms of a house needs to plan well when we want to remodel or build it. We need to think seriously of the things we want to have in our kitchen and how we locate them is very important as well, especially the things we need to install for good. Instinctively,...
midcityeast.com/kitchen-layout-planner-types-of-kitchen-l...
hello friends!!
well, here's new rule..
you gotta add me as a contact (and leave a comment or message) and i'll give you the code.. ok??
take care!!
enjoy choosing..
try this link for more layouts!!
wiluevrlearn.multiply.com/photos/album/24/friendster_layouts
Direção de arte e animação do menu do DVD da minha produtora de animação, a Mol Toons ( www.flickr.com./moltoons ).
Para assitir a animação: www.vimeo.com/13711773
This is the layout sheet with all the points marked on. It includes the sidings off from the main board. It doesn't include the back section that joins the left and right siding sets, but included the points that connects to that section.
Miley Cyrus layout! :) Hope u guys like it!
-simple-snow graphics
(you can also visit my site called simple-snow.piczo.com and get alot more things)
This extremely interesting and clever layout poses the question.
"If you had an old dockyard and unlimited funds to build a transport museum, what would it end up looking like. " Here is one answer!
Here is the bus collection. Meanwhile trams roll, Narrow gauge railways rumble,Bridges lift, Steam engines run, mainline diesels roar and even canal boats sail in and out of the canal basin in this all action layout.
visualfringe proposed layout
i have 6 feet of running wall space, what do you think i should do with it?
left to right:
port bruce #1 11x14 framed to 16x20 {$275}, kettle point #1 8x10 framed to 11x14 {$150}, grand bend #2 8x10 framed to 11x14 {$150}, ipperwash #1 11x14 framed to 16x20 {$275}
Our layout under our Christmas tree. I built the mountain and ice rink. I let the kids do all of the detailing.