View allAll Photos Tagged expandeduniverse
With Draetheus/Nate as Darth Caedus, Nara Rouge/Natalie as Tahiri Veila, Brandyn as Corran Horn, Bria as Mara Jade, hexterah/Heather as Tenel Ka Djo and Jesse as Teneniel Djo!
At the bottom of the ramp, Wedge calls out.
"General Solo? Chewbacca ? Are you in there ? It's Commander Antilles!"
A gruff voice answers back " What took you so long, Wedge? Get up here - I could use a hand with these repairs!"
This figure was voted Toyfare Fans' Choice and is based on the character from The Knights of the Old Republic video game.
Dr Aphra 3.75" with removable hat: Uses TVC 129 with modified head. I took off the hat w/hair piece from the head and dremeled out the inside of the hat to make it thinner and cut off the hair pieces - I left a little bit of the hair at the ends of the hat flaps and painted them as though they were straps. I thinned out and modified a hair piece taken off a Marvel Infinites Emma Frost, then repainted and glued it to the Dr Aphra head.
IMG_6835_210219-1_Low
The very RARE Brown Vested Jedi Luke Skywalker variant from the Power of the Force 2 line circa 1997.
this is the latest ithorian action figure released by hasbro
he's from the clone wars animated series and he ROCKS ... but I still like the 2006 guy best :)
Dr Aphra 3.75" with removable hat: Uses TVC 129 with modified head. I took off the hat w/hair piece from the head and dremeled out the inside of the hat to make it thinner and cut off the hair pieces - I left a little bit of the hair at the ends of the hat flaps and painted them as though they were straps. I thinned out and modified a hair piece taken off a Marvel Infinites Emma Frost, then repainted and glued it to the Dr Aphra head.
IMG_6836_210219-1_Low
Dr Aphra 3.75" with removable hat: Uses TVC 129 with modified head. I took off the hat w/hair piece from the head and dremeled out the inside of the hat to make it thinner and cut off the hair pieces - I left a little bit of the hair at the ends of the hat flaps and painted them as though they were straps. I thinned out and modified a hair piece taken off a Marvel Infinites Emma Frost, then repainted and glued it to the Dr Aphra head.
IMG_6840_210219-1_Low
I use to carry a Thrawn action figure in my pocket.
Now its usually a Lego in my pocket.
Say 194 of 365
On the terraformed throne-world of Yuzzhan'tar the final duel commences. Paragon of light, aided by his most brilliant students faces leader of the invaders. Together, building on the foundations on uncounted sacrifices of being all over the galaxy, they hope to bring an end to this war.
And so the era of New Jedi Order ends.
Entry for Space Jam 2023, Interstellar Conflict category.
With Draetheus/Nate as Darth Caedus, Nara Rouge/Natalie as Tahiri Veila, Brandyn as Corran Horn, Bria as Mara Jade, hexterah/Heather as Tenel Ka Djo and Jesse as Teneniel Djo!
Dr Aphra 3.75" with removable hat: Uses TVC 129 with modified head. I took off the hat w/hair piece from the head and dremeled out the inside of the hat to make it thinner and cut off the hair pieces - I left a little bit of the hair at the ends of the hat flaps and painted them as though they were straps. I thinned out and modified a hair piece taken off a Marvel Infinites Emma Frost, then repainted and glued it to the Dr Aphra head.
IMG_6838_210219-1_Low
Dr Aphra 3.75" with removable hat: Uses TVC 129 with modified head. I took off the hat w/hair piece from the head and dremeled out the inside of the hat to make it thinner and cut off the hair pieces - I left a little bit of the hair at the ends of the hat flaps and painted them as though they were straps. I thinned out and modified a hair piece taken off a Marvel Infinites Emma Frost, then repainted and glued it to the Dr Aphra head.
IMG_6837_210219-1_Low
1.16.22 - Sculpt progress on Star Wars: Dark Times (Dark Horse Comics) Dass Jennir and Falco Sang along with my first sculpt update on the "OG" bounty hunter, Skorr from the classic Marvel comic strip The Bounty Hunter of Ord Mantell. All 1:18 scale.
Holidays are over, the decorations are stored, time to get back to work.
Sculpt progress on Dass Jennir. I finished the first set of variant forearms that are connected by the magnets seen in my last update. Strong attachments, as if they were jointed. The second variant will have the forearms wrapped as they appeared when Jennir rode his steed. I also worked on building up the chest sculpt a bit, adding a loosely fitted collar to the shirt. Added some more hair to the head sculpt and began working on a hood/head combo that will work independently from one another rather than being a single, static sculpt.
Also worked on Jenir's steed. The sculpt as seen here in the photos will need a complete rework with the exception of the head and horns. The entire body needs to be thinned out, the neck especially. The neck also needs to be elongated and the center articulation cut removed. I never liked that and it serves no purpose. I think the body is ok...just too thick, muscular. Nothing wrong with some definition but right now the body is looking too much like a Clydesdale.
Falco Sang progress. Started sculpting the upper body and arms of the figure. I'm not sure if the character's "sneaking suit" contained a texture? In the comics, it's a flat black. I took a little artistic license and added a subtle texture to the bodysuit. When painted, I think it will make the figure much more interesting to look at. Also sculpted one of the shoulder guards. Not sure how it will connect to the figure at this point. I'm looking at some clear or black elastic mini bands to go over the shoulder. I want a free range of movement, that's for certain. Finally, I worked a bit more on Falco's unmasked head sculpt. Sanding down the scalp and sculpting ears. I plan on sculpting his hair this week. I also need to begin working on his doid, Ize.
The true "OG" bounty hunter. Before Boba, there was Skorr - the Bounty Hunter of Ord Mantell. You've seen the head sculpt before - I sculpted that back in 2011 I think? It needs a little work to bring it up to the standards I have now. Back then I was having issues learning to blend layers of epoxy at this scale. If you zoom in on this sculpt, you will see where layers ended and new layers began. Some simple sanding and resculpting will bring the head to sculpt up to date so expect a better look coming soon. The body is a dremeled down Spartan figure from Boss Fight. Nothing modded yet. I'm sure I will replace the neck joint and add more articulation but this will be the frame of choice. Gathered all the source images I could find so I hope to begin having better updates for you all in the immediate future.
Bonus! I'll be sculpting his sidekick "Gribbet" who is a Rybet bounty hunter and whose species ironically appears in the Dark Horse series! I've included a panel image showing the creature standing near Dass Jennir.
That's it for this week! Hope to have more to show you next week - if anything, just an image or two to show progress. Will be needing to purchase new molding and casting material for replications soon.
Thanks again for your continued interest in my work! I appreciate all the comments and critique you've given me!
#starwars #classicmarvelcomics #customactionfigures #darkhorsecomics #expandeduniverse #legends #sculpting #art #starwarsart #bountyhunter #dassjennir #falcosang #skorr #empirestrikesback #miniature
Dr Aphra 3.75" with removable hat: Uses TVC 129 with modified head. I took off the hat w/hair piece from the head and dremeled out the inside of the hat to make it thinner and cut off the hair pieces - I left a little bit of the hair at the ends of the hat flaps and painted them as though they were straps. I thinned out and modified a hair piece taken off a Marvel Infinites Emma Frost, then repainted and glued it to the Dr Aphra head.
IMG_6839_210219-1_Low
The Jedi High Council, formerly known as the Masters' Council, was the leading body of the New Jedi Order founded by Luke Skywalker. As of 35 ABY, the Masters' Council had formed as an informal body responsible for the leadership of the Order. However, at the conclusion of the Swarm War, Grand Master Skywalker formed an official High Council, from the loose collection of Jedi Masters, that mirrored the Council of the Jedi Order of the Galactic Republic. Both the Masters' Council and its successor consisted of the Order's twelve wisest and most powerful Masters.
And so, Wedge returned to his ship. After calling for the shuttle, then feeding them the Falcon's location, he set off for the coordinates Han gave him.
He landed his ship in a wooded area near the place where Chewbacca is being held, some sort of a ruined fortress on the outskirts of a city.
Wedge brings a new astromech droid (that was recently assigned to him while his usual droid is being repaired ) along in case he needs his skill in opening electronic locks.
"This part of the planet is much nicer than the last place I landed, but the air is still a little thin compared to Corellia!"
1.16.22 - Sculpt progress on Star Wars: Dark Times (Dark Horse Comics) Dass Jennir and Falco Sang along with my first sculpt update on the "OG" bounty hunter, Skorr from the classic Marvel comic strip The Bounty Hunter of Ord Mantell. All 1:18 scale.
Holidays are over, the decorations are stored, time to get back to work.
Sculpt progress on Dass Jennir. I finished the first set of variant forearms that are connected by the magnets seen in my last update. Strong attachments, as if they were jointed. The second variant will have the forearms wrapped as they appeared when Jennir rode his steed. I also worked on building up the chest sculpt a bit, adding a loosely fitted collar to the shirt. Added some more hair to the head sculpt and began working on a hood/head combo that will work independently from one another rather than being a single, static sculpt.
Also worked on Jenir's steed. The sculpt as seen here in the photos will need a complete rework with the exception of the head and horns. The entire body needs to be thinned out, the neck especially. The neck also needs to be elongated and the center articulation cut removed. I never liked that and it serves no purpose. I think the body is ok...just too thick, muscular. Nothing wrong with some definition but right now the body is looking too much like a Clydesdale.
Falco Sang progress. Started sculpting the upper body and arms of the figure. I'm not sure if the character's "sneaking suit" contained a texture? In the comics, it's a flat black. I took a little artistic license and added a subtle texture to the bodysuit. When painted, I think it will make the figure much more interesting to look at. Also sculpted one of the shoulder guards. Not sure how it will connect to the figure at this point. I'm looking at some clear or black elastic mini bands to go over the shoulder. I want a free range of movement, that's for certain. Finally, I worked a bit more on Falco's unmasked head sculpt. Sanding down the scalp and sculpting ears. I plan on sculpting his hair this week. I also need to begin working on his doid, Ize.
The true "OG" bounty hunter. Before Boba, there was Skorr - the Bounty Hunter of Ord Mantell. You've seen the head sculpt before - I sculpted that back in 2011 I think? It needs a little work to bring it up to the standards I have now. Back then I was having issues learning to blend layers of epoxy at this scale. If you zoom in on this sculpt, you will see where layers ended and new layers began. Some simple sanding and resculpting will bring the head to sculpt up to date so expect a better look coming soon. The body is a dremeled down Spartan figure from Boss Fight. Nothing modded yet. I'm sure I will replace the neck joint and add more articulation but this will be the frame of choice. Gathered all the source images I could find so I hope to begin having better updates for you all in the immediate future.
Bonus! I'll be sculpting his sidekick "Gribbet" who is a Rybet bounty hunter and whose species ironically appears in the Dark Horse series! I've included a panel image showing the creature standing near Dass Jennir.
That's it for this week! Hope to have more to show you next week - if anything, just an image or two to show progress. Will be needing to purchase new molding and casting material for replications soon.
Thanks again for your continued interest in my work! I appreciate all the comments and critique you've given me!
#starwars #classicmarvelcomics #customactionfigures #darkhorsecomics #expandeduniverse #legends #sculpting #art #starwarsart #bountyhunter #dassjennir #falcosang #skorr #empirestrikesback #miniature
The Field Secured Container Vessel is a pretty obscure ship, which breaks with the conventional triangular shape of imperial ships. Building the cargo in the bubbles was interesting, as I wanted to achieve a skeletal look which still filled up most of the sphere. The bubbles can however be left out, and the ships should be able to function as book stands.
The MoC is based on the excellent Renders from Fractalsponge and the few other illustrations I could find. It is not UCS-Scale, but I went for a similar amount of detail.
1.16.22 - Sculpt progress on Star Wars: Dark Times (Dark Horse Comics) Dass Jennir and Falco Sang along with my first sculpt update on the "OG" bounty hunter, Skorr from the classic Marvel comic strip The Bounty Hunter of Ord Mantell. All 1:18 scale.
Holidays are over, the decorations are stored, time to get back to work.
Sculpt progress on Dass Jennir. I finished the first set of variant forearms that are connected by the magnets seen in my last update. Strong attachments, as if they were jointed. The second variant will have the forearms wrapped as they appeared when Jennir rode his steed. I also worked on building up the chest sculpt a bit, adding a loosely fitted collar to the shirt. Added some more hair to the head sculpt and began working on a hood/head combo that will work independently from one another rather than being a single, static sculpt.
Also worked on Jenir's steed. The sculpt as seen here in the photos will need a complete rework with the exception of the head and horns. The entire body needs to be thinned out, the neck especially. The neck also needs to be elongated and the center articulation cut removed. I never liked that and it serves no purpose. I think the body is ok...just too thick, muscular. Nothing wrong with some definition but right now the body is looking too much like a Clydesdale.
Falco Sang progress. Started sculpting the upper body and arms of the figure. I'm not sure if the character's "sneaking suit" contained a texture? In the comics, it's a flat black. I took a little artistic license and added a subtle texture to the bodysuit. When painted, I think it will make the figure much more interesting to look at. Also sculpted one of the shoulder guards. Not sure how it will connect to the figure at this point. I'm looking at some clear or black elastic mini bands to go over the shoulder. I want a free range of movement, that's for certain. Finally, I worked a bit more on Falco's unmasked head sculpt. Sanding down the scalp and sculpting ears. I plan on sculpting his hair this week. I also need to begin working on his doid, Ize.
The true "OG" bounty hunter. Before Boba, there was Skorr - the Bounty Hunter of Ord Mantell. You've seen the head sculpt before - I sculpted that back in 2011 I think? It needs a little work to bring it up to the standards I have now. Back then I was having issues learning to blend layers of epoxy at this scale. If you zoom in on this sculpt, you will see where layers ended and new layers began. Some simple sanding and resculpting will bring the head to sculpt up to date so expect a better look coming soon. The body is a dremeled down Spartan figure from Boss Fight. Nothing modded yet. I'm sure I will replace the neck joint and add more articulation but this will be the frame of choice. Gathered all the source images I could find so I hope to begin having better updates for you all in the immediate future.
Bonus! I'll be sculpting his sidekick "Gribbet" who is a Rybet bounty hunter and whose species ironically appears in the Dark Horse series! I've included a panel image showing the creature standing near Dass Jennir.
That's it for this week! Hope to have more to show you next week - if anything, just an image or two to show progress. Will be needing to purchase new molding and casting material for replications soon.
Thanks again for your continued interest in my work! I appreciate all the comments and critique you've given me!
#starwars #classicmarvelcomics #customactionfigures #darkhorsecomics #expandeduniverse #legends #sculpting #art #starwarsart #bountyhunter #dassjennir #falcosang #skorr #empirestrikesback #miniature
1.16.22 - Sculpt progress on Star Wars: Dark Times (Dark Horse Comics) Dass Jennir and Falco Sang along with my first sculpt update on the "OG" bounty hunter, Skorr from the classic Marvel comic strip The Bounty Hunter of Ord Mantell. All 1:18 scale.
Holidays are over, the decorations are stored, time to get back to work.
Sculpt progress on Dass Jennir. I finished the first set of variant forearms that are connected by the magnets seen in my last update. Strong attachments, as if they were jointed. The second variant will have the forearms wrapped as they appeared when Jennir rode his steed. I also worked on building up the chest sculpt a bit, adding a loosely fitted collar to the shirt. Added some more hair to the head sculpt and began working on a hood/head combo that will work independently from one another rather than being a single, static sculpt.
Also worked on Jenir's steed. The sculpt as seen here in the photos will need a complete rework with the exception of the head and horns. The entire body needs to be thinned out, the neck especially. The neck also needs to be elongated and the center articulation cut removed. I never liked that and it serves no purpose. I think the body is ok...just too thick, muscular. Nothing wrong with some definition but right now the body is looking too much like a Clydesdale.
Falco Sang progress. Started sculpting the upper body and arms of the figure. I'm not sure if the character's "sneaking suit" contained a texture? In the comics, it's a flat black. I took a little artistic license and added a subtle texture to the bodysuit. When painted, I think it will make the figure much more interesting to look at. Also sculpted one of the shoulder guards. Not sure how it will connect to the figure at this point. I'm looking at some clear or black elastic mini bands to go over the shoulder. I want a free range of movement, that's for certain. Finally, I worked a bit more on Falco's unmasked head sculpt. Sanding down the scalp and sculpting ears. I plan on sculpting his hair this week. I also need to begin working on his doid, Ize.
The true "OG" bounty hunter. Before Boba, there was Skorr - the Bounty Hunter of Ord Mantell. You've seen the head sculpt before - I sculpted that back in 2011 I think? It needs a little work to bring it up to the standards I have now. Back then I was having issues learning to blend layers of epoxy at this scale. If you zoom in on this sculpt, you will see where layers ended and new layers began. Some simple sanding and resculpting will bring the head to sculpt up to date so expect a better look coming soon. The body is a dremeled down Spartan figure from Boss Fight. Nothing modded yet. I'm sure I will replace the neck joint and add more articulation but this will be the frame of choice. Gathered all the source images I could find so I hope to begin having better updates for you all in the immediate future.
Bonus! I'll be sculpting his sidekick "Gribbet" who is a Rybet bounty hunter and whose species ironically appears in the Dark Horse series! I've included a panel image showing the creature standing near Dass Jennir.
That's it for this week! Hope to have more to show you next week - if anything, just an image or two to show progress. Will be needing to purchase new molding and casting material for replications soon.
Thanks again for your continued interest in my work! I appreciate all the comments and critique you've given me!
#starwars #classicmarvelcomics #customactionfigures #darkhorsecomics #expandeduniverse #legends #sculpting #art #starwarsart #bountyhunter #dassjennir #falcosang #skorr #empirestrikesback #miniature