View allAll Photos Tagged casting
Sessió de càsting celebrada a l'Auditori Rocafort per escollir personatges per a la representació d'Els Pastorets
This cast iron object was found in a field after it had been tiled. It looks like the remains of a horse.
Step 1: Build your form and prepare your pieces to be molded. A buddy gave me a tip to use Legos to build my forms because they're quick, easy, and the liquid rubber doesn't stick to them after it dries!
I've also used light blue play-dough to create a seal around the bottom of the helmets to prevent the liquid rubber from seeping underneath them in the next step.
casting modelle milano
--
DIVENTA L'IMMAGINE DELLA PROSSIMA CAMPAGNA PUBBLICITARIA PER SCBN | MICROSOFT CERTIFIED PROFESSIONAL – GOOGLE PARTNER - www.visualteam.org .
--
Per utilizzare nelle Vostre produzioni i soggetti delle immagini inviare una e-mail a: selezioni@scbn.biz.
CBMM welcomed nationally renowned sculpture artist and Shepherd University professor Christian Benefiel, who guided workshop participants through the intricacies of casting bronze and aluminum, including creating molds, working the sand and furnace, and pouring molten metal. Learn more about all our shipyard programs at: cbmm.org/learn/shipyardprograms
Here's how I went about harvesting worm castings for the first time. I scooped up what looked to be ripe soil in a "finished" corner of my worm box and put it in a bucket. I then dumped it out on a tarp to form a little mountain. I left it out in the sun for a half hour. The worms headed for the coolest region—straight down—and I scraped worm castings off of the top. By the time I had made it to the bottom—yes, I know, this is not exactly Everest, but I was working slowly and carefully on this first test run—a whole mass of worms was down there, so I collected them and put them back into the bin.
The captain showed off his skill of net casting. Beautiful isn't it? How many fishes did he catch? One.
Shanghai Lishang International Trading Co.,Ltd., the professional continuous casting machine supplier in China, and the best continuous casting machine manufacturer in China.
Aluminium Casting and Rolling Machine Main technical date:
Dia. of the al. rod: Ф12, Ф9.5 mm
Production capacity: 2.5-4.2t/h
Overall dimension: (l×w×h) ≈32.05×7.2×4.2m
Total weight: ≈60t (not include the furnace body)
Technical data for components:
A. Continuous casting machine
Dia. of the crystallizing wheel: Ф1500mm
Section of the crystallizing wheel: 2420mm2
Section of the ingot: 2400mm2
Casting speed: 7.6-15m/min (rotate speed of the motor 500-1000r/min)
Rotate speed of the crystallizing wheel: 1.66-3.3r/min
Power of the crystallizing wheel motor: 4Kw
Cooling water pressure of the crystallizing wheel: 0.35-0.6Mpa
Cooling water consumption: 100t/h (inner cooling 60t/h, outer cooling 40t/h)
Water pump type: IS100-65-200
Motor type: Y160M2-2 22Kw
B. Monorail hydraulic shear:
Max. shearing force: 12000kgf
Max. shearing stroke: 65mm
Motor hoist type: TV-0.50 Max. load 250kg
Pump type: CB-FC-20
Oilpressure: 160kg/cm2
Oil volume: 20L/min
Motor power: 7.5Kw n=960r/min
C. Continuous rolling machine type Y:
Type: 3-roller type Y
Dia. of rod: Ф9.5, Ф12mm
No. of rolling stands: 15, 13
Nominal roller dia.: Ф255mm
Driving ratio between neighboring stands: 1:1.25
Max. finished rolling speed: V=6.2m/s
Rolling center height: 852.5mm
Main motor power: 250kw (DC n=500R/min)
Gear box and lubricating oil box: 3m3
D. Coiler:
Max. coiling weight: 2t
Max. dia. of the coiler: Ф1800mm
Driving motor power: 1.5kw
Trolley motor: 2.2kw
Trolley speed: 0.75/s
1. Aluminium Casting and Rolling Machine Brief technological process:
1.1
1.2 Aluminum liquid or compounded aluminum flows from the holding furnace through the launder to the belt continuous casting machine to cast the molten aluminum into trapezium ingot with a section of 2400mm2, then shear the substandard aluminum ingot, press the front part small, and feed it into the 15 rolling stands to manufacture al. rod with a dia. of 9.5mm. The stand (can also be bought from us) which will loop it.
2. Aluminium Casting and Rolling Machine Application:
This aluminum rod CCR line is designed to manufacture aluminum conductive rod diameter of 12mm with 13rolling stands, 9.5mm with 15 rolling stands.
3. Aluminium Casting and Rolling Machine Component parts and structural features:
Belt continuous casting machine consists of crystallizing wheel, driving device, press roll device, steel belt greasing device, guide bridge, steel belt tensioner, external cooling inject, steel belt, etc.
The melt aluminum flows from the holding furnace through the launder to the pouring groove, the floating head of the plug controls the flow of the al. liquid, the liquid is poured into the cavity formed by the crystallizing wheel and the sealed belt. The whole pouring groove can be moved up and down driving by the power of motor. Worm gear reducer and screw pair. The section of crystallizing wheel is M-type, and it is driven by the motor. The crystallizing wheel is equipped with an inner cooling device, which could spray cooling water onto the inner surface of the wheel with a water pressure of 0.35 Mpa. The inner cooling water can be divided into 6 sections; the flow could be controlled by the cut off valve. The external cooling device spray the cooling water onto the steel belt, so as to cool the al. liquid won't flow out. The guide wheel is used to adjust or change the direction of the steel belt and change the length of the cavity. The tension of the steel belt can be changed through the tensioner, so as to keep a certain tension. In order to strip the al. ingot, the continuous casting machine is equipped with steel belt greasing device. Because the whole process is not interrupted long ingot can be gained.
Continuous rolling mill:
The continuous rolling mill consists of 15 rolling stands of three rollers type-Y. The nominal dia. is 255mm. there are 7 upper driving device for even number rolling stands and 8 lower driving device for odd number rolling stands, they are arranged alternately. The type of the hole is "circuit-arc triangle-circuit". The main DC motor transmits the power through the coupler and the main shaft under the 12th rolling stand of driving gearbox. The transmission ratio between two neighboring stands is 1:1.25; there is safe tooth-like coupling in the junction of the gearbox and rolling stands. When it is overloaded, the safe pin will be cut to avoid the accident. In the front and the back of the rolling stands there are inlet and outlet guide device. The rolling guide device is used in the odd number rolling stands, and the sliding guide device is used in the even number rolling stands. Small roller of every rolling stands can be adjusted by shims of the different thickness; the range can be 0.1-1.00mm. The adjustment of the hole every rolling stands is taken out by a certain plug gauge. The seam can be 0.866mm, the tolerance is ±0.10mm.
The thin-oil lubricating system is used to lubricating the driving gearbox and bearings. It includes:
Oil pump: ZCY-18m3/0.36
Max. flow: 18m3/h
Work pressure: 0.35Mpa
Motor type: Y132M2-6 5.5kw
Oil temperature: 35-45oC
Oil tank: 3m3
The lubricating oil comes out of the oil box which has a volume of 3m3, and flows through the oil pump into the main intake pipe and then into the gearbox in three different ways. The lubricating oil is sprayed onto the gear through the oil nozzle, and lubricates the rolling bearing directly through the red copper joint of the branch oil pipe and the upper part of the bearing block.
The emulsion comes out of the emulsion station and flows into the main emulsion pipe which is installed in the driving gear box, and flows through the top and two sides of the stands into the rolling stands and the guide device separately. The returned emulsion can flows back to the emulsion tank through the return emulsion pipe and slot.
4. Aluminium Casting and Rolling Machine General situation: electrical circuit drawing
5. Aluminium Casting and Rolling Machine Operation: training on site
6. Aluminium Casting and Rolling Machine List of the bearings
6.1. List of the bearings
No. Drawing No. Parts Specification of bearing Bearing type Quantity
1 H202-101-00 Crystallizing wheel Ф180/Ф280×100 24036 1
2 H202-040-00 Guide bridge Ф70/Ф125×24 6214 8
6.2. Continuous rolling mill
No. Drawing No. Parts Specification of bearings Bearing type Quantity
1 H201-101-00 Gear box Ф120/Ф215×62 7524 31
Ф150/Ф270×45 7530 1
2 H201-020-00 Odd number roller stands Ф70/Ф150×35 2314 8
Ф60/Ф110×30 7512 48
3 H201-030-00 Even number roller stands Ф70/Ф150×35 2314 7
Ф60/Ф110×30 7512 42
4 H201-060-00 Input ingot press
roll Ф40/Ф80×18 208 2
Ф40/Ф80×18 208 2
5 H201-080-00 Entry guide pipe
for odd no. stand Ф12/Ф28×8 101 4
Ф15/Ф32×9 102 28
6.3 Coiling stand
No. Drawing No. Parts Specification of bearings Bearing type quantity
1 H203-020-00 Worm gear reducer box Ф100/Ф65×18 6013 2
Ф85/Ф45×15 72009 1
2 H203-020-00 Trolley Ф55/Ф120×29 312 4
7. Aluminium Casting and Rolling Machine Maintenance and reparation
7.1. All the places equipped with oil cup or existing relative motion, such as guide rail, screw and screw mandrel, etc. should be added with lubricating oil.
7.2. In all the lubricating oil station, emulsion stations, the oil level should be paid more attention to, and be clear at a fixed time to avoid being blocked. And lubricating oil should be added by a fixed time to keep a certain density. If they have been deteriorated, the deteriorated part should be cleared out in time. The oil should be filtered half a year, and no other dirty things are allowed to get in.
7.3. After working for 1500 hours, every gearbox should be opened and cleared, and filled in new oil, and make sure the oil level at the right place.
7.4. If the machine hasn't been used for a long time, the parts existing relative motion should be sprayed with oil. The taper gears and bearings of the rolling stands should be added with a certain volume of lubricant to avoid being rusted.
7.5. The cooling water should be supplied continuously; otherwise, the crystallizing wheel will be damaged.
7.6. If the load is added suddenly or the raw material is heap up, the shear pin of the safe coupling shaft.
My lucky day! have walked along here many times over the years and never been able to catch.. no pun intended.. someone fishing with the light actually on them. Some may say too bright for fishing but you take the chance while you can and hope.
Cold casting the Aluminum. Aluminum powder is first brushed into the mold, then ONYX polyurethane resin is poured in.
German desert forces continue to push into Mali, a surprise attack including some 15,000 soldiers is currently in effect. Troops are advancing in the night and intend to capture the capital tomorrow and wait for Mali forces surrender as their chain of command falls apart.
What casting directors really want
Had a shoot with young actor Jordan Billings.
We met up in his home town of Newton Le Willows. He travelled down from his acting studies at Preston University.
Casting directors and agents had given Jordan advice on the images required for professional actors' listings on Spotlight, Starnow and for casting in general. They want clean, professional headshots, so casting directors know what they're getting.
With the mobile studio set up, we captured a good range of images, giving Jordan plenty to choose from.
Jordan is an absolute gentleman and has a lovely family.
Find out more about Jordan at:-
www.starnow.co.uk/jordanbillings
www.mandy.com/uk/actor/jordan-billings
www.youtube.com/watch?v=gPDXWKN7u04&t=12s (showreel)
and of course on Starlight.com
Get in touch now, to book your shoot:-
neil.lynchehaun@neillynchehaun.co.uk
www.neillynchehaun.co.uk/contact
07894 579831
Take at look at my portfolio at www.neillynchehaun.co.uk
Please share!!
I so loved this scene at the end of the pier at Avila Beach in California. It was so foggy that morning. I imagined this guy sitting there in front of a blank canvas, his fishing poles as brushes, painting whatever he chose to imagine.
I miss the coast. :)
I was cleaning off my SD cards, and found a couple more pictures from shooting A Little Help in NY. this is our casting wall, where as people got roles, their pictures were pinned up so we could see the looks of the family units we were creating, and the environment.
7oz of lead and a squid bait will put a bend in most rods, even a Conoflex Tournament Extreme!!!!
(at least this one did not snap........)
Age : 19 ans
Taille : 1m70
Profession ou études en cours :
2ème année de classe prépa littéraire
Centres d’intérêts :
Lecture, danse orientale, échecs
Ambition dans la vie :
Agrégation d’histoire et d’ethnologie
Plus d'informations sur Miss Biot 2011 :
Before mass production of plastic parts, first determine the prototype is OK, then according to the prototype standard to small batch production. Only in this way can we make satisfactory products provided and serve customers.
The E-make team has more than 30 years of combined experience in prototype machining, CNC manufacturing, vacuum casting service.E-make company has been providing high-quality rapid prototype manufacturing services for the major enterprise. To know more visit: e-make.co/vacuum-casting-polyurethane-casting/ or call us at +86-75527209712 you can also write to us at eileen@e-make.co