View allAll Photos Tagged Subframing
Photo of M33 taken with a Canon 300D and Celestron C6-N at prime focus. Telescope was guided using a Meade 70AZ-Z and SPC900NC webcam using PHD Guiding.
Subframes:
40 x 90sec (ISO 1600)
20 darks/20 flats/20 offset
Subframes were stacked using Iris. Final processing was done in PS CS3
Detroit Speed, Inc - 1970-1981 - F-Body - Subframe Connectors Install
Watch Detroit Speed Fabricator Aaron Elenbaum install Subframe Connectors on the Detroit Speed 1970 Camaro Test Car.
Owners of the BMW 3 Series (E46 models) have been reporting cracks and damage in the rear subframe area of their vehicles. The issue was also common on the earlier 3 Series models and unfortunately, have reoccurred with the E46 from 1999-2006. This issue specifically appears in the rear mounting points of the subframe, which can tear out from their position in the sheet metal. This occurs as the rear differential transmits the torsional load from the engine through the subframe, and then, into the chassis of the vehicle. This constant abuse leads to fatigue in the metal, causing cracks and separation from the chassis.
The parts used for this repair includes:
Active Autowerke (www.activeautowerke.com):
• E46 Subframe / Rear Chassis Reinforcement Kit
Powerflex USA (powerflexusa.com):
• BMW E46 M3 Rear Subframe Front Bushing - Street
• BMW E46 M3 Rear Subframe Rear Bushing - Street
• BMW E46 M3 Rear Diff Rear Mount - Street
• BMW E46 M3 Rear Diff Front Mount - Street
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
Front subframe is now fitted. Full refurb on upper arms, etc
Front subframe is now fitted. Full refurb on upper arms, etc & new steering rack
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
This is what the cam covers will see on the way back up into the subframe. Hoping that may happen pretty soon...
I always learn something new at these shows I never knew.
During the presentation after the unveiling, Kurt Hofbauer talked about the restoration process. Turns out, the engine bay of the original 1962 Chevy II, a semi-unit body with a bolt-on front subframe and engine cradle, was intended to hold either the standard I-4 or optional I-6 engines -- never a V8.
When the decision was made at GM to shove a V8 into the top-of-the-line Chevy II Nova, things were a little tight. The problem was solved at the engineering level by offsetting the entire engine slightly to the passenger side of the car. Apparently, it's derailed quite a few aftermarket and DIY 6 to V8 engine swaps, and it caused some headaches for Brian Dinsmore at Heartland Autobody in Logan, IA, who restored this car.
If you open the hood of a factory V8 Chevy II or Nova and sight down the front fascia and windshield ridges and the air cleaner wingnut, you can see the offset, even without measuring the clearances on each side.
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...
The Car: 1969 Camaro with a Mast LS7 and a T-56 Magnum Transmission
The Project: The Camaro will be receiving our DSE Hydroformed Subframe, QUADRALink™, 4 point DSE Roll Cage, Mini Tub Kit and Subframe Connectors. The car will also be receiving Baer Brakes, a DSE Super Tank 1000 Series, C&R Radiator, DSE SS Headers and a full custom 3” exhaust system.
The Owner: This is Ronnie Buhr’s first project with DSE. He chose Detroit Speed to transform his car into a Pro-Touring Camaro that will ride and handle better than he ever imagined.
www.detroitspeed.com/Projects/ronnie-buhr-1969-camaro/ron...