View allAll Photos Tagged Packing
CEA were employed to pack and lash 77 units of Mud Skips, Cargo Baskets and Gas Racks into 14, 40ft HC containers, the cargo received was too wide to fit in to the containers in the conventional way and would have to be turned on its side. CEA would ready the containers for load out and transport them to port where the cargo would be shipped to Nigeria to be used in the offshore Oil & Gas sector.
PROCEDURE
Two wooden beams were placed on the floor in each of the containers, the cargo, on its side would be placed on these to ensure no damage occurred to the panels during loading, transportation and unloading. Lifting slings that would be used upon arrival in Nigeria were attached to each piece of cargo before packing.
A CEA reach stacker lifted each of the containers and placed them on to their sides upon wooden blocks. CEA fabricated specialised roller units to facilitate the loading, two units were placed underneath the front section to support the cargo while being loaded by forklift from the rear.
Mantiou 3.5 t forklift’s and 5 t pallet trucks loaded the cargo into the containers, both fork lifts and pallet trucks were covered with protective materials to prevent any damage to the cargo.
After all Mud Skips, Cargo Baskets and Gas Racks were loaded the CEA team lashed and secured them in place. Wooden chocks and stoppers were installed to further ensure no movement while transportation and shipping.
All necessary supporting documents were provided inside each container. A third party inspection team checked all loaded cargo and sealed the containers with the appropriate shipping tags. The containers were loaded on to flatbed trailers and transported to port to await shipping.
EQUIPMENT USED
Reach stacker
3.5t Manitou forklift
15t Mitsubishi forklift
Manitou telehandler
Pallet trucks
Isuzu DECA 360 prime movers
Flatbed trailers
A lot of liquor boxes for a Southern Baptist church lady!
They make excellent packing boxes, especially for delicate crystal, and the liquor stores are glad to get rid of them!
Stupid o'clock in the morning start & a couple of hours drive to visit Farmer John :o)
5DMk2 - 17-40L
Not the most exciting of photos but I only realised I never took a 365 photo once I had my camera packed away..The worst part of going away is the packing but 5 days in Co. Cork celebrating my friends 40th birthday to look forward to once I do manage to get packed. :)
(Day 266 or 365)
Lisa and I drove all over OC tonight and found some really nice photo spots we'd like to revisit when the sun's out. She never complains about being my model. lol
CEA were employed to pack and lash 77 units of Mud Skips, Cargo Baskets and Gas Racks into 14, 40ft HC containers, the cargo received was too wide to fit in to the containers in the conventional way and would have to be turned on its side. CEA would ready the containers for load out and transport them to port where the cargo would be shipped to Nigeria to be used in the offshore Oil & Gas sector.
PROCEDURE
Two wooden beams were placed on the floor in each of the containers, the cargo, on its side would be placed on these to ensure no damage occurred to the panels during loading, transportation and unloading. Lifting slings that would be used upon arrival in Nigeria were attached to each piece of cargo before packing.
A CEA reach stacker lifted each of the containers and placed them on to their sides upon wooden blocks. CEA fabricated specialised roller units to facilitate the loading, two units were placed underneath the front section to support the cargo while being loaded by forklift from the rear.
Mantiou 3.5 t forklift’s and 5 t pallet trucks loaded the cargo into the containers, both fork lifts and pallet trucks were covered with protective materials to prevent any damage to the cargo.
After all Mud Skips, Cargo Baskets and Gas Racks were loaded the CEA team lashed and secured them in place. Wooden chocks and stoppers were installed to further ensure no movement while transportation and shipping.
All necessary supporting documents were provided inside each container. A third party inspection team checked all loaded cargo and sealed the containers with the appropriate shipping tags. The containers were loaded on to flatbed trailers and transported to port to await shipping.
EQUIPMENT USED
Reach stacker
3.5t Manitou forklift
15t Mitsubishi forklift
Manitou telehandler
Pallet trucks
Isuzu DECA 360 prime movers
Flatbed trailers
CEA were employed to pack and lash 77 units of Mud Skips, Cargo Baskets and Gas Racks into 14, 40ft HC containers, the cargo received was too wide to fit in to the containers in the conventional way and would have to be turned on its side. CEA would ready the containers for load out and transport them to port where the cargo would be shipped to Nigeria to be used in the offshore Oil & Gas sector.
PROCEDURE
Two wooden beams were placed on the floor in each of the containers, the cargo, on its side would be placed on these to ensure no damage occurred to the panels during loading, transportation and unloading. Lifting slings that would be used upon arrival in Nigeria were attached to each piece of cargo before packing.
A CEA reach stacker lifted each of the containers and placed them on to their sides upon wooden blocks. CEA fabricated specialised roller units to facilitate the loading, two units were placed underneath the front section to support the cargo while being loaded by forklift from the rear.
Mantiou 3.5 t forklift’s and 5 t pallet trucks loaded the cargo into the containers, both fork lifts and pallet trucks were covered with protective materials to prevent any damage to the cargo.
After all Mud Skips, Cargo Baskets and Gas Racks were loaded the CEA team lashed and secured them in place. Wooden chocks and stoppers were installed to further ensure no movement while transportation and shipping.
All necessary supporting documents were provided inside each container. A third party inspection team checked all loaded cargo and sealed the containers with the appropriate shipping tags. The containers were loaded on to flatbed trailers and transported to port to await shipping.
EQUIPMENT USED
Reach stacker
3.5t Manitou forklift
15t Mitsubishi forklift
Manitou telehandler
Pallet trucks
Isuzu DECA 360 prime movers
Flatbed trailers
Packing foam
If you want a high resolution version (for commercial or other use), this picture is available at ShutterStock
Packing is hard. It's about passing judgment. What is worthy of being kept and what should be cast off? I am guilty of owning too many things, some, I must shamefully admit, i forgot i ever had. It feels good to give things away to people who will appreciate them more. On the other hand, I've been desperately looking for a few things i really miss-- an old journal from when i was 21 and living on a kibbutz in israel, my grandmother's pearl necklace that i know i put in a "safe" place but it's so safe i can't remember just where it is.
As for this photo. I got tired of looking at the "old" 18 year old me in my underwear. But since I've been too busy packing to get out and photograph anything new i took this one of me with my MacBook camera. I'm wrapped in one of the few items i haven't yet packed--my orange throw that keeps me warm on cold winter nights.
who says that packing and and pms means you have to look sub par?
forget the chocolate!
- thrifted cardigan
- nanso t-shirt
- thrifted gold scale belt
- thrifted burnt orange pleated skirt
- (not seen but omnipotent) blue slingback peeptoes
I swear by the bundled method. It keeps my clothes from wrinkling, makes efficient use of space and stuff doesn't shift around. We each had one 22" expandable roller board that happened to match (because bought at Target when on sale). We also each bought a 16" rolling carry-on which made airport negotiation a lot easier. My mother got her knock-off Polo one from Singapore for $50 and I picked up a no name knock off in Khao San Road, the backpacker's part of town in BKK, for $30.
This is my brand new and very nifty packing area. Now all of my packaging materials are kept right here (note the very clever - if I must say so myself - use of the keyboard drawer for storing tissue paper and wrapping things up on!) and I can sit here and pack everything up ready for posting off.
We will have 38 boxes this time, and I am doing it all myself. >_< No furniture again, just stuff.
23 days until they are picked up, and 26 days left until our flight.
Busy packing this evening, and I start my last week of work tomorrow... A lovely week of earlies too!
It's all happening, and all scary... Please someone tell me it's all going to be okay!!
Previous site: WheelChairs For Kids. A Volunteer packing the last wheelchair for a container load for Syria. G1X3831
CEA were employed to pack and lash 77 units of Mud Skips, Cargo Baskets and Gas Racks into 14, 40ft HC containers, the cargo received was too wide to fit in to the containers in the conventional way and would have to be turned on its side. CEA would ready the containers for load out and transport them to port where the cargo would be shipped to Nigeria to be used in the offshore Oil & Gas sector.
PROCEDURE
Two wooden beams were placed on the floor in each of the containers, the cargo, on its side would be placed on these to ensure no damage occurred to the panels during loading, transportation and unloading. Lifting slings that would be used upon arrival in Nigeria were attached to each piece of cargo before packing.
A CEA reach stacker lifted each of the containers and placed them on to their sides upon wooden blocks. CEA fabricated specialised roller units to facilitate the loading, two units were placed underneath the front section to support the cargo while being loaded by forklift from the rear.
Mantiou 3.5 t forklift’s and 5 t pallet trucks loaded the cargo into the containers, both fork lifts and pallet trucks were covered with protective materials to prevent any damage to the cargo.
After all Mud Skips, Cargo Baskets and Gas Racks were loaded the CEA team lashed and secured them in place. Wooden chocks and stoppers were installed to further ensure no movement while transportation and shipping.
All necessary supporting documents were provided inside each container. A third party inspection team checked all loaded cargo and sealed the containers with the appropriate shipping tags. The containers were loaded on to flatbed trailers and transported to port to await shipping.
EQUIPMENT USED
Reach stacker
3.5t Manitou forklift
15t Mitsubishi forklift
Manitou telehandler
Pallet trucks
Isuzu DECA 360 prime movers
Flatbed trailers
CEA were employed to pack and lash 77 units of Mud Skips, Cargo Baskets and Gas Racks into 14, 40ft HC containers, the cargo received was too wide to fit in to the containers in the conventional way and would have to be turned on its side. CEA would ready the containers for load out and transport them to port where the cargo would be shipped to Nigeria to be used in the offshore Oil & Gas sector.
PROCEDURE
Two wooden beams were placed on the floor in each of the containers, the cargo, on its side would be placed on these to ensure no damage occurred to the panels during loading, transportation and unloading. Lifting slings that would be used upon arrival in Nigeria were attached to each piece of cargo before packing.
A CEA reach stacker lifted each of the containers and placed them on to their sides upon wooden blocks. CEA fabricated specialised roller units to facilitate the loading, two units were placed underneath the front section to support the cargo while being loaded by forklift from the rear.
Mantiou 3.5 t forklift’s and 5 t pallet trucks loaded the cargo into the containers, both fork lifts and pallet trucks were covered with protective materials to prevent any damage to the cargo.
After all Mud Skips, Cargo Baskets and Gas Racks were loaded the CEA team lashed and secured them in place. Wooden chocks and stoppers were installed to further ensure no movement while transportation and shipping.
All necessary supporting documents were provided inside each container. A third party inspection team checked all loaded cargo and sealed the containers with the appropriate shipping tags. The containers were loaded on to flatbed trailers and transported to port to await shipping.
EQUIPMENT USED
Reach stacker
3.5t Manitou forklift
15t Mitsubishi forklift
Manitou telehandler
Pallet trucks
Isuzu DECA 360 prime movers
Flatbed trailers
Inspired by the children's book, "Flat Stanley", by Jeff Brown. My sister is introducing Flat Stanley to her class and gave me her Stanley to take pictures of.
This photo is un-edited and a favorite from the trip I just went on to CT.
CEA were employed to pack and lash 77 units of Mud Skips, Cargo Baskets and Gas Racks into 14, 40ft HC containers, the cargo received was too wide to fit in to the containers in the conventional way and would have to be turned on its side. CEA would ready the containers for load out and transport them to port where the cargo would be shipped to Nigeria to be used in the offshore Oil & Gas sector.
PROCEDURE
Two wooden beams were placed on the floor in each of the containers, the cargo, on its side would be placed on these to ensure no damage occurred to the panels during loading, transportation and unloading. Lifting slings that would be used upon arrival in Nigeria were attached to each piece of cargo before packing.
A CEA reach stacker lifted each of the containers and placed them on to their sides upon wooden blocks. CEA fabricated specialised roller units to facilitate the loading, two units were placed underneath the front section to support the cargo while being loaded by forklift from the rear.
Mantiou 3.5 t forklift’s and 5 t pallet trucks loaded the cargo into the containers, both fork lifts and pallet trucks were covered with protective materials to prevent any damage to the cargo.
After all Mud Skips, Cargo Baskets and Gas Racks were loaded the CEA team lashed and secured them in place. Wooden chocks and stoppers were installed to further ensure no movement while transportation and shipping.
All necessary supporting documents were provided inside each container. A third party inspection team checked all loaded cargo and sealed the containers with the appropriate shipping tags. The containers were loaded on to flatbed trailers and transported to port to await shipping.
EQUIPMENT USED
Reach stacker
3.5t Manitou forklift
15t Mitsubishi forklift
Manitou telehandler
Pallet trucks
Isuzu DECA 360 prime movers
Flatbed trailers
Mockup of a Formaspace industrial packing station with roller bar, pegboard, and metal loop partitions on upper shelf.
CPI combines a wide variety of materials and designs to meet any specific packing ring requirement - cast iron, and bronze are just a few of the materials offered. All of these materials are available in packing rings designed for unidirectional and bi-directional sealing, low pressure vent sealing, and gas purge sealing. High speed and high pressure rings are also available.
Packing glass
This photo is released under a Creative Commons Attribution 4.0 International license. If you'd like to use this photo, feel free to do so, but please give credits to Fantastic Removals and not to this Flickr account.