View allAll Photos Tagged Configuration
The bedroom configuration. Our large painting by Peter Hoffer will go above the bed, and the pendants will drop over our bedside tables. The lights will eventually get diffusers to even out the "spot" effect.
Shilton church is a mostly 14th/15th century building with a west tower and an unusual configuration of no aisle on the south side of the nave but a double one to the north; the outer aisle is a Victorian addition by George Gilbert Scott when he restored the church in 1865.
The interior is fairly dark with the south nave wall and north arcade leaning outwards dramatically (also an odd hollowed out piscina recess in the south east nave window recess). The fittings are mostly Victorian, but the pieces of tracery on the low chancel screen panelling are fragments of the 15th century rood screen. The stained glass is Victorian too, (the east window by Clayton & Bell, others by Hardman's) but two windows have 14th century elements, the west window in the tower with some fragmentary grisaille and red glass, whilst in the nave clerestorey are two shields of the Earl of Essex.
The church is usually kept locked outside of service times; I owed my first visit to the help of a kind churchwarden who unlocked for me. On this occasion my former colleagues from Norgrove Studios were working on a south nave window enabling me to revisit and give a short talk on the glass (in addition to much improving my photographic record).
Part of a series of shots influenced by Valie Export and her "Body Configuration" idea. These photos are taken on a bell tower against the setting sun in the background.
Representative configurations (a) Original pattern on a plane, unfolded and flat. (b) Stretchable helical configuration, with 2 degrees of freedom in each unit. (c) Compactly folded, becomes a square (when φ=π/4) with a certain thickness due to non-zero thickness of paper. (d) Cylindrical helical configuration (e) Tube configuration.
Image by Xiaomin Han.
The Sony NEX rig setup configuration including the Universal Baseplate with Z-Spacer, ¼ 20” lens support, and Zwiss Plate. Also included with this rig is the Z-Finder EVF.
Product configuration: RT100-T-2-HV1-02(89)-HD10b8-BT2③②R-(W100L-HV1)-M7
RT100: RunnTech 100 series multi-axis joystick;
T: self-returns to center when handle is released;
2: dual axis, cross movement control;
HV1: input: DC5V, output: 0~2.5~5V;
HD10b8: joystick grip with deadman trigger;
BT2③②R: 2 momentary thumb push button;
W100L: proportional thumbwheel (the third axis control);
M7: mounting dimension 85x85mm, central hole: 80x80mm;
RunnTech 3 Axis Spring-return Hall Joystick with 0 to 5V DC Analog Output and 3 Momentary Button
About RT100 Multi-axis Joystick Controller
RT100 industrial joystick controller, is mainly used in hydraulic proportional control or variable frequency motor control, such as Rotary table (drilling rig), Crane, Aerial work platforms, Forklift trucks, Mobile hydraulics, Shield tunneling machine, Hoist, Marine, Construction machinery, Civil engineering, Military vehicles, Cabin vehicles, Military robotics, Precision machine tools, Refuse handling trucks, Fire and off-highway vehicle, etc.
a friend made the wooden cube for me. i stained it and painted the gold designs from a pattern i found online. not the best paint job, but it worked just fine for a party in a dark house full of drunkies.
To reduce complexity it seems reasonable to reduce the amount of communication channels. Here is a proposal. We are happy for any feedback.
This settings will allow you to use the X-Lite softphone with the Telepac VoIP service.
See www.simplicidade.org/notes/archives/2008/10/sip_is_up_and... for more information.
Timbuk2 Hacker Daypack. This view shows the backpack strap configuration. This is my preferred style.
Despite the frailty of Duskwing, he looks sleek and clean in both battroid and jet configuration. Though, the transformation process is difficult and likes to fall appart. This was something I improved greatly on the next AlterCore models.
Canon EOS 5D MkII, EF 28-135 F3.5 5.6 IS
My Facebook page www.facebook.com/fredographie Please like it;-)
Volunteers worked through three days of thunderstorms installing the second configuration of Dan Corson's "Oscillating Field" temporary art project on the Sound Transit lot that will soon be a light rail construction site on Capitol Hill in Seattle. Broadway & Denny, Nov 7 09 .Photo by Corey Scherrer
Standard configurations:
Operation light 1 set
Three way syringe (warm/cold)2 pcs
Suction handpiece (Weak/Strong)1 set each
Rotating luxury ceramic cuspidor1set
Image viewer1set
Constant temperature ration mouth wash automatic control system1 set
Handing apparatus holding tray1set
Hand piece blow crumbs function1set
Round-shape foot switch1set
Air brake apparatus arms switch 1set
Rotating assistant setting1set
Seat and backrest budge in-phase system1set
Water supply system completely1set
Air pressure working stool1pc
Unreturned liquid valve (Anti-retraction valve) 1 set
Options:
Can change for top mounted
High speed handpiece
Low speed handpiece
Digital intra-oral camera
LED dental curing light
Polisher
Scaler
Oil-less air compressor
Contact: Rita Chiew
Email: rita.xingui@gmail.com
Mob:+86 13450878730
A derringer is a small handgun that is neither a revolver, semi-automatic pistol, nor machine pistol. It is not to be confused with mini-revolvers or pocket pistols, although some later derringers were manufactured with the pepperbox configuration. The modern derringer is often multi barreled, and is generally the smallest usable handgun of any given caliber and barrel length due to the lack of a moving action, which takes up more space behind the barrel. It is frequently used by women because it is easily concealable in a purse or a stocking.
The original Philadelphia Deringer was a muzzleloading caplock single-shot pistol introduced in 1825 by Henry Deringer. In total, approximately 15,000 Deringer pistols were manufactured. All were single-barrel pistols with back-action percussion locks, typically .41 caliber with rifled bores and walnut stocks. Barrel length varied from 1.5 to 6 in (38 to 152 mm), and the hardware was commonly a copper-nickel alloy known as "German silver".
The term "derringer" became a genericized misspelling during the reporting of the Lincoln assassination, which was committed with a concealed Philadelphia Deringer. Many copies of the original Philadelphia Deringer pistol were made by other gunmakers worldwide, and the name remained often misspelled; this misspelling soon became an alternative generic term for any pocket pistol, along with the generic phrase "palm pistol", which Deringer's competitors invented and used in their advertising. With the advent of metallic cartridges, pistols produced in the modern form are still commonly called "derringers".
The ancestor to the deringer of the Old West was the boxlock overcoat pistol used by travelers from the late 18th century onward as protection from highwaymen. These were also known as boot pistols, Toby pistols, manstopper pistols, vest pocket pistols, and muff pistols because they could be concealed in a woman’s hand-warmer muff. Originally made as flintlocks, later versions used cap and ball ignition and sometimes featured turn-off barrels for faster reloading. Double-barreled caplock pocket pistols, commonly known as twister pistols, became popular in England during the Regency era and also saw use among Union Army officers during the American Civil War. These served as the forerunner to the Old West gambler's over-and-under deringer and also to the pepperbox revolver with the addition of a ratchet to mechanically rotate the barrels.
The Philadelphia Deringer was a small percussion handgun designed by Henry Deringer (1786–1868) and produced from 1825 through 1868. A popular concealed carry handgun of the era, this pocket pistol design was widely copied by competitors, sometimes down to the markings.
For loading a Philadelphia Deringer, one would typically fire a couple of percussion caps on the handgun, to dry out any residual moisture contained in the tube or at the base of the barrel, to prevent a subsequent misfire. One would then remove the remains of the last fired percussion cap and place the handgun on its half-cock notch, pour 15 to 25 grains (1 to 2 g) of black powder down the barrel, followed by ramming a patched lead ball down onto the powder, being very careful to leave no air gap between the patched ball and the powder, to prevent the handgun from exploding when used. (The purpose of the patch on the ball was to keep the ball firmly lodged against the powder, to avoid creating what was called a "short start" when the ball was dislodged from being firmly against the powder.)
A new percussion cap would then be placed on the tube (nipple), and the gun was then loaded and ready to fire. (The half-cock notch prevented the hammer from falling if the trigger was bumped accidentally.) Then, to fire the handgun, the user would fully cock the hammer, aim, and squeeze the trigger. Upon a misfire, the user could fully re-cock the hammer, and attempt to fire the handgun once more, or switch to a second Deringer. Accuracy was highly variable; although front sights were common, rear sights were less common, and some Philadelphia Deringers had no sights at all, being intended for point-and-shoot use instead of aim and shoot, across poker-table distances. Professional gamblers, and others who carried regularly, would often fire and reload daily, to decrease the chance of a misfire.
Deringer's production records, and contemporaneous records of his imitators, indicate that these pistols were almost always sold in matching pairs. (A typical price was $15 to $25 for a pair, with silver-inlaid and engraved models selling at higher prices.) The choice of buying a pair, in part, was to compensate for the limited power of a single-shot, short-barreled pistol, and to compensate for a design considerably less reliable than subsequent cartridge derringer designs. Original Deringers are almost never found still in their matched pairs today.
Initially popular with military officers, the Deringer became widely popular among civilians who wished to own a small and easily concealable pistol for self-defense.
In the Old West, derringers were commonly known as vest-pocket pistols, sleeve guns, and boot pistols.
In total, approximately 15,000 Deringer pistols were manufactured. All were single-barrel pistols with back action percussion locks, typically 0.41-inch (10 mm) rifled bores, and walnut stocks. Barrel length varied from 1.5 to 6 inches (38 to 152 mm), and the hardware was commonly a copper-nickel alloy known as "German silver". The back action lock was a later, improved design among locks, which had its spring and mechanism located behind the hammer, where it was thereby protected from dirt, fired cap residue, and gunpowder residue, unlike earlier front action locks that had their springs and mechanism located directly in the path of such residue in front of the hammer, under the tube.
Because of their small size and easy availability, Deringers sometimes had the dubious reputation of being a favored tool of assassins. The most famous Deringer used for this purpose was fired by John Wilkes Booth who assassinated United States President Abraham Lincoln at Ford's Theatre in Washington, D.C., on April 14, 1865. Booth's Deringer was unusual in that the rifling twisted counterclockwise (left-handed twist), rather than the typical clockwise twist.
Daniel Moore patented a single-shot metallic cartridge .38 Rimfire pistol in 1861. These pistols had barrels that pivoted sideways on the frame to allow access to the breech for reloading. Moore would manufacture them until 1865 when he sold out to the National Arms Company, which produced single-shot .41 Rimfire Deringers until 1870 when it was acquired by Colt's Patent Firearms Manufacturing Company. Colt continued to produce the .41 Rimfire Deringer after the acquisition, as an effort to help break into the metallic-cartridge gun market, but also introduced its own three single-shot Colt Deringer models, all of them also chambered in the .41 Rimfire cartridge. The last model to be in production, the third Colt Deringer, was not dropped until 1912. The third Colt Deringer model was re-released in the 1950s for western movies, under the name "Fourth Model Colt Deringer".
One of the more common deringers found in the Old West were the Sharps deringers. They are four-barrel, single-action pepperboxes with revolving firing pins. They come in .22, .30 and .32 rimfire, and their four barrels slide forward to load and unload. First patented in 1849, they were not made until 1859, when Sharps patented a practical derringer design. These first model deringers have brass frames and fired the recently introduced .22 Rimfire metallic cartridges. The second model was a .30 Rimfire deringer. The third model deringer was a .32 Rimfire, with an iron frame, and the barrel release was moved from under the frame to the left side of the frame. The fourth model deringer was also a .32 Rimfire, with a new "birdshead" grip and slightly shorter barrels, otherwise, it was virtually identical to the third model. Production of these little pistols came to an end with the death of Christian Sharps in 1874.
Remington Arms manufactured more than 150,000 Model 95 over-under double-barreled derringers, also called the Model 95 Double Deringer, from 1866 until the end of their production in 1935. The gun was made only in .41 rimfire. The Remington derringer design doubled the capacity while maintaining a compact size, by adding a second barrel on top of the first and pivoting the barrels upward to reload. Each barrel chambered one round, and a cam on the hammer alternated between the top and bottom barrels. There were four models with several variations. The .41 Short bullet moved very slowly, at about 425 feet per second (130 m/s), around half the speed of a modern .45 ACP.
Remington also constructed the .32 short Rimfire "Rider Magazine Repeating" pistol. The magazine tube under the barrel held five rounds of ammunition, plus one in the chamber. Muzzle velocity was between 675 and 700 ft/s (206 and 213 m/s) with a 60-grain (3.9 g) .32 bullet. This particular model featured a hammer that also drew back the breach block and lifted a new cartridge out of the magazine upon cocking. Relaxing one's grip on the hammer closed the breech block, but left the hammer cocked.
A military pistol that is a deringer design is the FP-45 Liberator, a .45 ACP insurgency weapon dropped behind Axis lines in World War II. The FP-45 was a crude, single-shot pistol designed to be cheaply and quickly mass produced. It had just 23 largely stamped and turned steel parts that were cheap and easy to manufacture. It fired a .45 caliber pistol cartridge from an unrifled barrel. Due to this limitation, it was intended for short-range use (1–4 yards (1–4 m)) either as a last-ditch self-defense gun or to sneak up on and kill an unsuspecting Axis soldier to steal a more serviceable weapon. Its maximum effective range was only about 25 feet (8 m). At longer range, the bullet would begin to tumble and stray off course. Five extra rounds of ammunition could be stored in the pistol grip. The original delivered cost for the FP-45 was $2.10 per unit, lending it the nickname "Woolworth pistol".
While the classic Remington design is a single-action deringer with a hammer and tip-up action, the High Standard D-100, introduced in 1962, is a hammer-less, double-action derringer with a half-trigger-guard and a standard break action design. These double-barrel derringers were chambered for .22 Long Rifle and .22 Magnum and were available in blued, nickel, silver, and gold-plated finishes. Although they were discontinued in 1984, American Derringer obtained the rights to the High Standard design in 1990 and produced a larger, .38 Special, version. These derringers, called the "DS22" and "DA38", are still made and are popular concealed-carry handguns.
The COP 357 is a four-barrel, hammerless, double-action, .357 Magnum derringer with the barrels stacked in a 2 Ă— 2 block. Introduced in 1984, it is not much larger than a .25 ACP semi-automatic pistol, and is significantly smaller than a small-frame revolver. A smaller-caliber version of the "Mini COP" in .22 Magnum was also made by American Derringer.
DoubleTap derringers are modern, hammerless, double-action, double-barreled, large caliber derringers designed for personal protection and introduced by DoubleTap Defense in 2012. They feature stainless steel ported barrels and aluminum or titanium alloy frames. They also hold two extra rounds in the grip. Its makers have stated that they drew inspiration from the FP-45 Liberator pistol, which also held extra ammunition in the grip.
The Armodilo display stand turns your iPad or other tablet device into a stunning interactive display so you can deliver your message with more impact and collect more leads. Every Armodilo stand is easily configurable for free standing, tabletop or wall-mounted display. What’s more, every configuration can be assembled or disassembled in less than 90 seconds and packed inside
a custom carrying case for hassle-free transportation and storage.
Parameter configuration table and picture display of Dongfeng Duolika 18m aerial work truck
1. The basic parameters of the vehicle:
Serial number
name
Model and specification
1
Vehicle brand
Dongfeng Duolika 18m Aerial Operating Truck (Single Row)
2
Product number
CLW5080JGKE5
3
Chassis model
EQ1080SJ8BDC
4
Maximum working height
18 meters
5
Main technical parameters of operation
Platform height above the ground 16.3m
Maximum operating range of the platform≥7.9m
Operating range at the maximum operating height of the platform≥3.1m
Operating height at the maximum operating range of the platform≥10.2m
Rated load of working bucket 200kg
Outrigger
Method: H-shaped outrigger
Quantity: 4
Control: Individually adjustable or linked.
Transverse span: 3755mm
Longitudinal cross play: 3750mm
Hook
The maximum lifting weight is ≤1000kg, and the safety value is 800kg.
Maximum lifting height 7.7m
Main operation
Operating position: double working position operation of turntable and hanging rail.
Control mode: manual hydraulic or electronic control operation.
www.runtrucks.cn/dongfeng-duolika-18m-aerial-operating-tr...
The final year of full size Ford wagons included just 3,865 built in base LTD Crown Victoria, LX, Country Squire and Country Squire LX models. The 2-row (six seat) Country Squire LX started at $18,335 with the 8-seat configuration at $19,085. A driver's air bag was added for 1990, along with rear shoulder belts. The 5.0 liter (302) V8 was standard. The LX package on the Crown Victoria and Country Squire included 6-way power driver's seat, AM/FM stereo cassette, cast aluminum wheels, illuminated entry, bumper guards, rear defroster, automatic speed control, power locks, leather wrapped steering wheel and cornering lamps.
1991 Ford and Mercury wagons had 90.4 cubic feet cargo volume index with 165 cubic feet total EPA interior volume index, slightly smaller than the new 1991 Chevy Caprice and Buick Roadmaster wagons.
New 1992 Crown Victoria and Grand Marquis sedans (without wagons) debuted in March 1991.
1991 LTD series (Crown Victoria & Country Squire) brochure: www.lov2xlr8.no/brochures/ford/91crv/91crv.html