View allAll Photos Tagged surface
Elm Bank Drive in Mapperley Park. A nice example of mapping by walking about (MBWA) is that it gives an opportunity to discuss some of the little niggles everyone encounters. Roads with a mix of surfaces are a good example.
Common dolphins - mother and calf - break the surface for a breath of air. Alboran Sea, off the coast of Almeria, Spain
via Outdoor Surface Painting outdoorsurfacepainting.tumblr.com/post/148241905401
Just Pinned to Cycle Lane Colour Painting: Cycle Lane Colour...
The Apollo Lunar Module (LM) was a two-stage vehicle designed by Grumman to ferry two astronauts from lunar orbit to the lunar surface and back. The upper ascent stage consisted of a pressurized crew compartment, equipment areas, and an ascent rocket engine. The lower descent stage had the landing gear and contained the descent rocket engine and lunar surface experiments.
LM 2 was built for a second unmanned Earth-orbit test flight. Because the test flight of LM 1, named Apollo 5, was so successful, a second mission was deemed unnecessary. LM-2 was used for ground testing prior to the first successful Moon-landing mission. In 1970 the ascent stage of LM-2 spent several months on display at the "Expo '70" in Osaka, Japan. When it returned to the United States, it was reunited with its descent stage, modified to appear like the Apollo 11 Lunar Module "Eagle," and transferred to the Smithsonian for display. (Source: Smithsonian National Air and Space Museum).
Daily 195
14.07
D1 surfacing in the pool. I kept this shot because I loved the distortion on her hands.
SEPTA Marmon-Herrington TC-46 "trackless trolley" 474 (1949) @Bells Corner Loop on Route 59 CASTOR AV 8-25-77 The 400's are one window shorter than the 300's
This tiled floor surface in the northeast corner of the site is the remains of the passage that divided Nos 4 & 5. Within the backyard deposits around it we've found fragments of 17th and 18th Century pottery.
Throughout this course you will be involved in monitoring, reviewing and evaluating the quality and progress ot your work. This will usually be done through “crits” which will be carried out in small groups usually involving two tutors and four students.
To help you to learn, develop your skills and raise your standards - each assignment will be reviewed and evaluated through “crits” almost as soon as you have finished it to help you get the best possible learning value out of the work you have done.
To track your development of the skills identified in the nine course specific units, these skills are clearly described in the Assignment Assessment Records which will be used throughout the programme. To complete the course successfully you must demonstrate appropriate skills in ALL ot these units.
Playing around with a lava lamp, macro, and exposure.
Looking for a traditional round bokeh result when shot with the lens wide open.
www.richconn-cnc.com/surface-finishing/
The surface treatment requirements of special industries are extremely stringent, such as parts and products in the extreme climatic environment have a level of product surface cleanliness, types of primers, topcoats, and protective coatings. Our company has a complete surface treatment plant. Metals can be sprayed with tungsten carbide, zirconia, alumina, nitriding, carburizing, electrophoresis, vacuum coating (PVD), nickel plating, galvanizing, chromium plating, sandblasting, anodizing, Teflon spraying, fingerprint protection coating, etc.
Surface Treatment is Generally Divided into Three Descriptions:
1. Physical surface treatment, the method and process of surface treatment of raw materials or parts and products through physical contact. Such as: sandblasting, shot peening, polishing, sanding, deburring, and deoxidation.
2. Chemical reaction surface treatment, oxidation, electroplating, spraying, electrophoresis, printing, corrosion, blackening, bluing, etc., by electrochemically changing the surface composition of the material to form a protective and decorative layer.
3. Heat treatment is a method of treating the substrate surface or the whole at high temperatures. High-frequency quenching, quenching and tempering, annealing, tempering, etc. change the hardness, welding performance and processing performance of the material. Such as gears, sprockets, molds, tool blades and other products. Surface treatment is to make the material have better performance and appearance.
SURFACE TREATMENT APPLICATION
1. Packaging and printing industry: packaging surface printing, lamination, oiling; labeling of food and beverage bottles.
2. Automobile and ship industry: anti-rust, anti-corrosion, anti-acid and alkali of metal parts; internal and external decoration, shell, outer body anti-rust, anti-corrosion, appearance decoration, etc. all need electrophoresis, anode, spray painting,
3. Ceramic industry: ceramic surface electroplating, sintering glazing, surface printing,
4. Wire and cable industry: optical fiber, cable printing, laser label, copper and aluminum cable surface annealing, tin plating, gold plating, nickel plating.
5. Medical biomaterial industry: surface disinfection and hydrophilic treatment of surgical parts. Compatibility and harmless disposal of human implants.
6. Textile printing and dyeing industry: chemical and physical treatment of textile fibers, cotton, and linen, etc. surface dyeing, destabilizing, increasing adhesion, etc.
7. Plastic products industry: The surface plating and printing of plastic products (toys, beverage bottles, cosmetic bottles, mobile phone cases, watch cases) increase the decorative effect or adhesion,
8. Digital product industry: printed circuit board printing, surface treatment of electronic components, etc.
9. Rubber and plastics industry: rubber surface coating, printing.
10. Glass product industry: glass surface electroplating, printing, corrosion, hydrophilicity. Such as automotive glass moisture-proof, sound insulation, refractive index, transparency and other treatments.
11. Metal processing and equipment manufacturing industry: surface quenching and tempering, quenching, annealing, oxidation, blackening, spraying, etc. of metal parts and equipment as a whole change the properties of surface metal materials. Or increase the hardness, improve the corrosion resistance, wear resistance, or change the appearance effect, etc.12. Aviation and aerospace industry: special materials and special surface treatments can enable the surfaces of aviation and spacecraft to withstand high temperature, high pressure, and high torque.
ADVANTAGES OF SURFACE TREATMENT
1. Make the material or product have better performance and appearance, such as the PVD vacuum coating of the iPhone shell and glass, so that the glass is more wear-resistant and beautiful, and the middle frame is not easy to scratch and fall off the paint;
2. Improve the mechanical properties, chemical properties and reaction properties of materials; reduce surface resistance. Such as mold steel material quenching and tempering, reducing roughness, making the product harder, friction-resistant, and low-damping.
3. Improve the production speed of parts or products, shorten the production cycle and reduce costs.
Ohio Caverns is the largest cave system in Ohio. It is located in a bedrock knob called Mt. Tabor on the southern side of the Bellefontaine Outlier (= Ohio's elevationally highest area). The cave is hosted in the Middle Devonian Columbus Limestone, which is part of a widespread shallow marine carbonate succession in eastern and midwestern America.
The cave ceiling shown above is a breakdown detachment surface. Small to large blocks of rock that fall down from ceilings or upper walls in caves are called breakdown. Such rocks sometimes form large piles that can block entire cave passages. The surface in the photo is not an ordinary bedding plane - it's a stylolite. Stylolites are pressure dissolution surfaces. They represent surfaces where some limestone was dissolved away. Stylolites can be present in limestone, marble, and dolostone. In cross-section view, stylolites make a jagged up-and-down pattern, somewhat like a seismographic recording of an earthquake. In bedding plane view, they are non-planar and rough. Crusts of insoluble material are frequently present at stylolite surfaces. Dissolution occurs in the first place due to pressure from the weight of overlying rocks.
At Ohio Caverns, breakdown detachment principally occurs along stylolites, but non-stylolite bedding planes are also breakdown surfaces.
Locality: Ohio Caverns, Mt. Tabor, east of the town of West Liberty, northern margin of Champaign County, western Ohio, USA
----------------
For a recent technical article on the geology of Ohio Caverns, see:
SAN DIEGO (Aug. 12, 2014) Sailors and civilians compete in a sailing competition during the Naval Surface Force, U.S. Pacifid Fleet Surface Line Week. More than 40 commands will participate in professional and athletic events until Aug. 15, and will conclude with a picnic and awards ceremony. (U.S. Navy photo by Mass Communication Specialist 2nd Class Zachary Bell/Released)
SEPTA-surface Marmon-Herrington TC-49 "trackless trolley" 306 (1955) waits at Bells Corner Loop on Route 59 CASTOR AV 8-25-77
140813-N-YK910-011 SAN DIEGO (Aug. 14, 2014) Sailors from the Wasp-class amphibious assault ship USS Essex (LHD 2) compete in a swimming event as part of Surface Line Week 2014. Surface Line Week 2014 is an annual competition sponsored by Naval Surface Forces and features activities dedicated to friendly competition in a variety of professional and sporting events. (U.S. Navy photo by Mass Communication Specialist 3rd Class Christopher Janik/Released)
This is Paul at the back of the boat having just surfaced from another great dive. There were usually loads of Giant Trevally and a Maori Wrasse (big bugger) hanging around here so when you're waiting for your turn on the ladder there's always something to look at!
Water surface
#photography #plant #puddle #puddle_reflection #pond #nature #outdoors #obygdn #water #surface #refection #fir #trees #noroads #Autumn #red #green #blue #sky #northern_sweden #sweden #fujfilm #gfx50s #flora #grass #rocky_heath #rocky_mooreland
ID: 003831
This picture is (c) Copyright Frank Titze, all rights reserved.
It may NOT be reproduced, copied, edited, published, transmitted or uploaded in any way without my permission.
See more pictures on frank-titze.art.
------------------------------------------------
Exposure: Digital
Developing: ---
Enlarging: ---
Scanning: ---
Processing: Digital
------------------------------------------------
Exposure: 08/2015
Processing: 08/2015
Published: 01/2016
------------------------------------------------
Flickr "taken" date set as actual publish date.
------------------------------------------------