Couldn’t give her red hearts, red clashes with red hair, apparently! :)

Meet Polly … Polly Styrene …

She was going cheap at a Costume Hire closing down sale!

I got a Speedlite 430EX II and umbrella for Christmas so I bought her to practise a bit of portraiture.

I was going for a shadow down one side of her face.

Poor Polly, she’s been thrown about a bit and even the skin smoothing tool wouldn’t sort out her blemishes!

Happy Valentine's Day!

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Soviet Laboratory of High-Speed Automobiles (LSA ChADI, today the Chardiv National Automobile and Highway University) was founded in 1953. One of the laboratory’s founders was Vladimir Nikitin, a famous racer not only inside the Soviet Union but also around the world. The main purpose of Vladimir Nikitin’s of was to build the fastest car in the world. This idea of creating race cars became the purpose of the laboratory and has been continued by students of Nikitin throughout the years, with research and prototypes in various fields of car propulsion.

This time the goal was to push „скорость“ and the national land speed record in excess of 800 km/h (500 mph), and step by step the vehicle’s top speed was gradually increased. On August 15, an officially timed record attempt was made, again with Victor Barchenkov at the steering wheel. The first of the two obligatory runs within an hour was recorded at a very promising 846.961 km/h (526.277 mph), but, at the end of the second run, „скорость“ veered off and no time was measured. Even worse, the vehicle lost its parachute brakes and went out of control, skidding away from the dry race track into Lake Baskunchak’s wet salt sludge, where it hit a ground wave at around 200 mph (320 km/h) and was catapulted through the air into a brine pond where it landed on its right side and eventually sank. Again, pilot Victor Barchenkov remained mostly unharmed and was able to leave the car before it sank – but this fatal crash meant the end of the „скорость“ vehicle and the complete KhAGI 9-II project. Furthermore, the break-up of the Soviet Union at the same time prevented and further developments of high speed vehicles. The whereabouts of the „скорость“ wreck remain unclear, too, since no official attempt had been made to save the vehicle’s remains from Lake Baskunchak’s salt swamps.

The kit and its assembly:

This is another contribution to the late 2018 “Racing & Competition Group Build” at whatifmodelers.com. Since I primarily build aircraft in 1:72 scale, building a land speed record (LSR) vehicle from such a basis appeared like a natural choice. A slick streamliner? A rocket-powered prototype with Mach 1 potential? Hmmm… However, I wanted something else than the typical US or British Bonneville Salt Flats contender.

Inspiration struck when I remembered the real world high speed vehicle projects of LSA ChAGI in the former USSR, and especially the ill-fated, jet-powered ChADI 9, which looked a lot like Western, rocket-powered absolute LSR designs like The Blue Flame or Wingfoot Express 2. Another inspiration was a contemporary LSR vehicle called North American Eagle – basically a wingless F-104 Starfighter, put on wheels and sporting a garish, patriotic livery.

With this conceptual basis, the MiG-21 was quickly identified as the potential starting basis – but I wanted more than just a Fishbed sans wings and with some bigger wheels attached to it. I nevertheless wanted to retain the basic shape of the aircraft, but change the rest as good as possible with details that I have learned from reading about historic LSR vehicles (a very good source are the books by German author and LSR enthusiast Ferdinand C. W. Käsmann, which have, AFAIK, even been translated into English).

At the model’s core is a contemporary KP MiG-21MF, but it’s a hideous incarnation of the venerable Kovozávody Prostějov mold. While the wheels and the dashboard of this kit were surprisingly crisp, the fuselage halves did hardly match each other and some other parts like the landing gear covers could only be described as “blurred blobs”. Therefore it was no shame to slice the kit up, and the resulting kitbash with many donor parts and scratching almost became a necessity.

The MiG-21 fuselage and cockpit were more or less retained, the landing gear wells covered and PSR-ed. Fin, spine and the ventral stabilizer were cut away, and the attachment points for the wings and the horizontal stabilizers blended into the rest of the fuselage. Actually, only a few parts from the KP MiG-21 were eventually used.

The original shock cone in the air intake was used, but it was set further back into the nose opening – as an attachment point for a new, more organic shock cone which is actually the rear end of a drop tank from an Airfix 1:72 P-61 Black Widow. This detail was inspired by a real world benchmark: Art Arfons’ home-built “Green Monster” LSR car. This vehicle also inspired the highly modified air intake shape, which was scratched from the tail cone from a Matchbox 1:72 Blackburn Buccaneer – the diameter matched well with the MiG-21’s nose! With the new nose, I was able to retain the original MiG-21 layout, yet the shape and the extension forward changed the overall look enough to make it clear that this was not simply a MiG-21 on wheels.

With the spine gone, I also had to integrate a different, much smaller canopy, which came from an 1:144 Tornado. The cockpit opening had to be narrowed accordingly, and behind the canopy a new spine fairing was integrated – simply a piece from a streamlined 1:72 1.000 lb bomb plus lots of PSR.

Inside of the cockpit, a simpler seat was used, but the original cockpit tub and the dashboard were retained.

The large MiG-21 fin was replaced with a smaller piece, left over from an Amodel Kh-20 missile, with a scratched brake parachute fairing (cut from sprue material) placed under its rear. The exhaust nozzle was replaced, too, because the fit of the KP MiG-21’s rear end was abysmal. So I cut away a short piece and added an afterburner nozzle from a vintage 1:72 F-100, which fits well. Inside, the part’s rear wall was drilled open and extended inwards with a styrene tube.

The wheels of the vehicle come from an 1:72 Hasegawa “Panther with Schmalturm” tank kit – it comes not only with two turrets, but also with a second set of simplified track wheels. These had IMHO the perfect size and shape as massive aluminum wheels for the high speed vehicle.

For the front wheels, I used the thinner outer Panther wheels, and they were put, closely together, onto a central suspension pylon. This received a new “well” in the forward fuselage, with an internal attachment point. In order to streamline the front wheel installation (and also to change the overall look of the vehicle away from the MiG-21 basis), I added a scratched an aerodynamic fairing around it. This was made from tailored styrene strips, which were later filled and blended into the hull with putty.

The rear suspension was also fully scratched: the outriggers were made from styrene profiles while the wheel attachments were once part of an 1:35 tank kit suspension – I needed something to hold the three struts per side together. These parts look a bit large, but the vehicle is, after all, a Soviet design, so a little sturdiness may not be wrong, and I simply did not want to stick the wheels directly onto the outriggers. The rear wheels (in this case, the wider inner Panther track wheels with a central hub cover were used) also received a stabilizing notch around the contact surface, in an attempt to make them look slimmer than they actually are.

Final touches included the chines under the nose as well as spoilers on the rear suspension (both made from styrene profiles), and I added a pitot made from wire to the original MiG-21 angle of attack sensor fairing.

As an addition outside the model itself I also created a display base for the beauty pics, since I did not have anything at hand that would resemble the vastness of a flat and dry salt sea. The base is an 18x12” MDF board, on top of which I added a thin coat of white tile grout (which I normally use as a snow placebo, instead of plaster, which tends to absorb humidity over time and to become yellow). While the stuff was still wet I sprinkled some real salt onto the surface and wetted the whole affair with water sprays – hoping to create a flat yet structured surface with some glitter reflexes. And it actually worked!

Painting and markings:

I am not certain how ChADI 9 was painted (I assume overall silver), but I wanted for „скорость“ a little more color. Being a child of the Soviet era, red was a settled design element, but I thought that an all-red vehicle might have looked too cheesy. Other colors I considered were orange or white with blue trim, but did not find them to be appropriate for what I was looking. Eventually, I added some Russian Utilitarianism in the form of light grey for the upper hull (Humbrol 166, RAF Light Aircraft Grey), and the red (Humbrol 19) as a dark contrast around the complete air intake as well as the shock cone (somewhat inspired by the Green Monster #15 LSR vehicle), and then extended backwards into a narrowing cheatline along the flanks, which emphasizes the vehicle’s slender hull. For some more contrast between the two basic tones I later added thin white borders between them created with 2mm white decal stripes from TL Modellbau. Around the hull some bright red (Humbrol 238 Red Arrows Red) highlights as warning signs were added.

The vehicle’s afterburner section was painted with Modelmaster Steel Metallizer, the Panther wheels became Aluminum (Revell 99) with a black ink wash. Some black ink was also applied to the jet nozzle, so that the details became more pronounced, and some grinded graphite was used to enhance the burnt metal effect.

Since this would rather be an experimental car built and operated by a high school institute, and also operated in the Soviet Union, flashy sponsor markings would not be appropriate. Therefore I created some fictional marking at home with the help of PC software and printed them by myself. These designs included a fictional logo of the ChADI institute itself (created from a car silhouette drawing) and a logo for the vehicle’s title, “„скорость““. The latter was created from the cyrillic lettering, with some additions like the vehicle’s silhouette.

Unfortunately the production process for the home-made decals did not work properly – when coating the prints with gloss acrylic varnish the printer ink started to dissolve, bleeding magenta, so that the decals would look as if there was a red halo or glow around the otherwise black motifs. Thanks to the use of red in the vehicle’s overall design this flaw is not too apparent, so I stuck with the outcome and applied the decals to the car.

Beyond these basic markings, many stencils were added, including dull red inscriptions from an Italeri MiG-37 “Ferret” kit – finally, I found an expedient use for them! The Soviet flags on the fin came from an 1:144 Tu-144 airliner Braz Decal aftermarket sheet.

Finally, some panel lines were drawn onto the hull with a soft pencil and then the model was sealed with Italeri semi-gloss acrylic varnish. Just the black anti-glare panel in front of the windscreen became matt and the metallic rear section was left in “natural” finish.

I am very pleased with the outcome – the „скорость“ looks purposeful and does IMHO blend well into the line of spectacular USA and UK jet/rocket car designs that broke the 800 km/h barrier. I also find that, even though the MiG-21 ancestry is certainly there, the vehicle looks different enough so that the illusion that it was designed along the jet fighter’s lines (and not converted from one, like the real world “North American Eagle” which was built from an F-104 Starfighter) works well. I also think that the vehicle’s livery works well – it looks quite retro for a vehicle from the late Eighties, but that just adds to the “Soviet style”. An interesting project, outside of my normal comfort zone. :D

I recently bought two of the Atlas trainman bulkhead flats. These cars were virtually new during the time period I model so they've been given very little weathering. The load is some evergreen styrene tube I had laying around with strapping made from thin strips of electrical tape.

Some background:

Simple, efficient and reliable, the Regult (リガード, Rigādo) was the standard mass production mecha of the Zentraedi forces. Produced by Esbeliben at the 4.432.369th Zentraedi Fully Automated Weaponry Development and Production Factory Satellite in staggering numbers to fill the need for an all-purpose mecha, this battle pod accommodated a single Zentraedi soldier in a compact cockpit and was capable of operating in space or on a planet's surface. The Regult saw much use during Space War I in repeated engagements against the forces of the SDF-1 Macross and the U.N. Spacy, but its lack of versatility against superior mecha often resulted in average effectiveness and heavy losses. The vehicle was regarded as expendable and was therefore cheap, simple, but also very effective when fielded in large numbers. Possessing minimal defensive features, the Regult was a simple weapon that performed best in large numbers and when supported by other mecha such as Gnerl Fighter Pods. Total production is said to have exceeded 300 million in total.

At the end of Space War I in January 2012, production of the Regult for potential Earth defensive combat continued when the seizure operation of the Factory Satellite was executed. After the war, Regults were used by both U.N. Spacy and Zentraedi insurgents. Many surviving units were incorporated into the New U.N. Forces and given new model numbers. The normal Regult became the “Zentraedi Battle Pod” ZBP-104 (often just called “Type 104”) and was, for example, used by Al-Shahal's New U.N. Army's Zentraedi garrison. The related ZBP-106 was a modernized version for Zentraedi commanders, with built-in boosters, additional Queadluun-Rhea arms and extra armaments. These primarily replaced the Glaug battle pod, of which only a handful had survived. By 2067, Regult pods of all variants were still in operation among mixed human/Zentraedi units.

General characteristics:

Accommodation: pilot only, in standard cockpit in main body

Overall Height: 18.2 meters

Overall Length: 7.6 meters

Overall Width: 12.6 meters

Max Weight: 39.8 metric tons

Powerplant & propulsion:

1x 1.3 GGV class Ectromelia thermonuclear reaction furnace,

driving 2x main booster Thrusters and 12x vernier thrusters

Performance:

unknown

Armament:

None

Special Equipment and Features:

Standard all-frequency radar antenna

Standard laser long-range sensor

Ectromelia infrared, visible light and ultraviolet frequency sensor cluster

ECM/ECCM suite

The kit and its assembly:

I had this kit stashed away for a couple of years, together with a bunch of other 1:100 Zentraedi pods of all kinds and the plan to build a full platoon one day – but this has naturally not happened so far and the kits were and are still waiting. The “Reconnaissance & Surveillance” group build at whatifmodellers.com in August 2021 was a good occasion and motivation to tackle the Tactical Scout model from the pile, though, as it perfectly fits the GB’s theme and also adds an exotic science fiction/anime twist to the submissions.

The kit is an original ARII boxing from 1983, AFAIK the only edition of this model. One might expect this kit to be a variation of the 1982 standard Regult (sometimes spelled “Reguld”) kit with extra parts, but that’s not the case – it is a new mold with different parts and technical solutions, and it offers optional parts for the standard Regult pod as well as the two missile carrier versions that were published at the same time, too. The Tactical Scout uses the same basis, but it comes with parts exclusive for this variant (hull and a sprue with the many antennae and sensors).

I remembered from a former ARII Regult build in the late Eighties that the legs were a wobbly affair. Careful sprue inspection revealed, however, that this second generation comes with some sensible detail changes, e. g. the feet, which originally consisted of separate toe and heel sections (and these were hollow from behind/below!). To my biggest surprise the knees – a notorious weak spot of the 1st generation Regult kit – were not only held by small and flimsy vinyl caps anymore: These were replaced with much bigger vinyl rings, fitted into sturdy single-piece enclosures made from a tough styrene which can even be tuned with small metal screws(!), which are included in the kit. Interesting!

But the joy is still limited: even though the mold is newer, fit is mediocre at best, PSR is necessary on every seam. However, the good news is that the kit does not fight with you. The whole thing was mostly built OOB, because at 1:100 there's little that makes sense to add to the surface, and the kit comes with anything you'd expect on a Regult Scout pod. I just added some lenses and small stuff behind the large "eye", which is (also to my surprise) a clear part. The stuff might only appear in schemes on the finished model, but that's better than leaving the area blank.

Otherwise, the model was built in sub-sections for easier painting and handling, to be assembled in a final step – made possible by the kit’s design which avoids the early mecha kit’s “onion layer” construction, except for the feet. This is the only area that requires some extra effort, and which is also a bit tricky to assemble.

However, while the knees appear to be a robust construction, the kit showed some material weakness: while handling the leg assembly, one leg suddenly came off under the knees - turned out that the locator that holds the knee joint above (which I expected to be the weak point) completely broke off of the lower leg! Weird damage. I tried to glue the leg into place, but this did not work, and so I inserted a replacement for the broken. This eventually worked.

Painting and markings:

Colorful, but pretty standard and with the attempt to be authentic. However, information concerning the Regults’ paint scheme is somewhat inconsistent. I decided to use a more complex interpretation of the standard blue/grey Regult scheme, with a lighter “face shield” and some other details that make the mecha look more interesting. I used the box art and some screenshots from the Macross TV series as reference; the Tactical Scout pod already appears in episode #2 for the first time, and there are some good views at it, even though the anime version is highly simplified.

Humbrol enamels were used, including 48 (Mediterranean Blue), 196 (RAL 7035, instead of pure white), 40 (Pale Grey) and 27 (Sea Grey). The many optics were created with clear acrylics over a silver base, and the large frontal “eye” is a piece of clear plastic with a coat of clear turquoise paint, too.

The model received a black ink washing to emphasize details, engraved panel lines and recesses, as well as some light post-shading through dry-brushing. Some surface details were created with decal stripes, e. g. on the upper legs, or with a black fineliner, and some color highlights were distributed all over the hull, e. g. the yellowish-beige tips of the wide antenna or the bright blue panels on the upper legs.

The decals were taken OOB, and thanks to a translation chart I was able to decipher some of the markings which I’d interpret as a serial number and a unit code – but who knows?

Finally, the kit received an overall coat of matt acrylic varnish and some weathering/dust traces around the feet with simple watercolors – more would IMHO look out of place, due to the mecha’s sheer size in real life and the fact that the Regult has to be considered a disposable item. Either it’s brand new and shiny, or busted, there’s probably little in between that justifies serious weathering which better suits the tank-like Destroids.

A “normal” build, even though the model and the topic are exotic enough. This 2nd generation Regult kit went together easier than expected, even though it has its weak points, too. However, material ageing turned out to be the biggest challenge (after all, the kit is almost 40 years old!), but all problems could be overcome and the resulting model looks decent – and it has this certain Eighties flavor! :D

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

...this covid year has been unprecedented crazy and we are finishing it with a crescendo of good (vaccine) and bad (transmissibility change and epicurves) news.

Thank goodness we have telephones/zoom/facetime

Hopefully people will be accepting/sensible/pragmatic/altruistic and stick with government advice and look forward to the future - I predict that Christmas 2021 is going to be great fun!

just listening to the wonderful, and so sadly missed: Poly Styrene

- Black Christmas

www.youtube.com/watch?v=ML0cD0REC4Y

Category: Model Kit.

Name: Air Battleship Goliath (with 1/20 scale Colonel Muska figure).

Scale: Non.

Origin: Laputa, Castle In The Sky.

Brand: Fine Molds.

Material: Styrene Plastic.

Release Date: Dec 2019.

Condition: Unassembled.

*Note: This is a Model Kit collected by my BB.

More in My Collection Corner.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on authentic facts. BEWARE!

Some background:

In Autumn 1946, the Saab company began internal studies aimed at developing a replacement aircraft for the Saab B 18/S 18 as Sweden's standard attack aircraft. In 1948, Saab was formally approached by the Swedish Government with a request to investigate the development of a turbojet-powered strike aircraft to replace a series of 1940s vintage attack, reconnaissance, and night-fighter aircraft then in the Flygvapnet’s inventory. On 20 December 1948, a phase one contract for the design and mock-up of the proposed aircraft was issued. The requirements laid out by the Swedish Air Force were demanding: the aircraft had to be able to attack anywhere along Sweden's 2,000 km (1,245 miles) of coastline within one hour of launch from a central location, and it had to be capable of being launched in any weather conditions, at day or night.

However, this was still not the end of the Saab 32, which turned out to be even more long-lived: By 2010, at least two Lansens were still operational, having the sole task of taking high altitude air samples for research purposes in collaboration with the Swedish Radiation Safety Authority, and by 2012 a total of three Lansens reportedly remained in active service in Sweden.

General characteristics:

Crew: 2

Length: 14.94 m (49 ft 0 in)

Wingspan: 13 m (42 ft 8 in)

Height: 4.65 m (15 ft 3 in)

Wing area: 37.4 m² (403 sq ft)

Airfoil: NACA 64A010

Empty weight: 7,500 kg (16,535 lb)

Max takeoff weight: 13,500 kg (29,762 lb)

Powerplant:

1× Svenska Flygmotor RM6A afterburning turbojet

(a Rolls Royce Avon Mk.47A outfitted with an indigenous afterburner),

delivering 4,88 kp dry and 6,500 kp with reheat

Performance:

Maximum speed: 1,200 km/h (750 mph, 650 kn)

Range: 2,000 km (1,200 mi, 1,100 nmi) with internal fuel only

Service ceiling: 15,000 m (49,000 ft)

Rate of climb: 100 m/s (20,000 ft/min)

Armament:

No internal weapons.

13× external hardpoints (five major pylons and eight more for light weapons)

for a wide variety of up to 3.000 kg of ordnance, typically only used

for ECM and chaff/flare dispenser pods and/or a conformal ventral auxiliary tank

The kit and its assembly:

This is a what-if project that I had on my idea list for a long time, but never got the nerve to do it because it is just a mild modification – the model depicts a real aircraft type, just with a fictional livery for it (see below).

The plan to create a J 32E from Heller’s A 32 kit from 1982 predated any OOB option, though. Tarangus has been offering a dedicated J 32B/E kit since 2016, but I stuck to my original plan to convert a Heller fighter bomber which I had in The Stash™, anyway)- also because I find the Tarangus kit prohibitively expensive (for what you get), even though it might have saved some work.

The Heller A 32A kit was basically built OOB, even though changing it into a J 32B (and even further into an “E”) called for some major modifications. These could have been scratched, but out of convenience I invested into a dedicated Maestro Models conversion set that offers resin replacements for a modified gun bay (which has more pronounced “cheek fairings” than the attack aircraft, the lower section is similar to the S 32C camera nose), a new jet exhaust and also the Lansen’s unique conformal belly tank – for the cost of a NIB Heller Saab 32 kit alone, though… :-/

Implanting the Maestro Models parts was straightforward and relatively easy. The J 32B gun bay replaces the OOB parts from the Heller kit, fits well and does not require more PSR than the original part. Since the model depicts a gun-less J 32E, I faired the gun ports over.

The RM6A exhaust was a bit more challenging – it is a bit longer and wider than the A 32A’s RM5. It’s not much, maybe 1mm in each dimension, so that the tail opening had to be widened and slightly re-contoured to accept the new one-piece resin pipe. The belly tank matched the kit’s ventral contours well. As an extra, the Maestro Models set also offers the J 32B’s different tail skid, which is placed further back on the fighter than on the attack and recce aircraft.

The J 32E’s characteristic collection of sizable blade antennae all around the hull was scratched from 0.5 mm styrene sheet. Furthermore, the flaps were lowered, an emergency fuel outlet was added under the tail, the canopy (very clear, but quite thick!) cut into two parts for optional open display, and the air intake walls were extended inside of the fuselage with styrene sheet.

Under the wings, four pylons (the Heller kit unfortunately comes totally devoid of any ordnance or even hardpoints!) from the spares box were added that carry scratched BOZ-1 chaff dispensers and a pair of ADRIAN/PETRUS ECM pod dummies – all made from drop tanks, incidentally from Swedish aircraft (Mistercraft Saab 35 and Matchbox Saab 29). Sure, there are short-run aftermarket sets for this special equipment that might come closer to the real thing(s), but I do not think that the (quite considerable) investments in all these exotic aftermarket items are worthwhile when most of them are pretty easy to scratch.

Painting and markings:

The paint scheme was the actual reason to build a J 32E: the fundamental plan was to build a Lansen in the Swedish air superiority low-viz two-tone paint scheme from the Nineties, and the IMHO only sensible option beyond pure fantasy was the real J 32E as “canvas”. I used JAS 39 Gripens as reference: their upper tone is called Pansargrå 5431-17M (“Tank Grey”, which is, according to trustworthy sources, very close to FS 36173, U.S. Neutral Grey), while the undersides are painted in Duvagrå 5431-14M (“Dove Grey”; approximately FS 36373, a tone called “High Low Visibility Light Grey”). Surprisingly, other Swedish types in low-viz livery used different shades; the JA 37s and late J 35Js were painted in tones called mörkgrå 033M and grå 032M, even though AJSF 37s and AFAIK a single SK 37 were painted with the Gripen colors, too.

After checking a lot of Gripen pictures I selected different tones, though, because the greys appear much lighter in real life, esp. on the lower surfaces. I ended up with FS 36231 (Dark Gull Grey, Humbrol 140, a bit lighter than the Neutral Grey) and RLM 63 (Lichtgrau, Testors 2077, a very pale and cold tone). The aircraft received a low waterline with a blurry edge, and the light grey was raised at the nose up to the radome, as seen on JA 37s and JAS 39s. To make the low-viz Lansen look a little less uniform I painted the lower rear section of the fuselage in Revell 91 and 99, simulating bare metal – a measure that had been done with many Lansens because leaking fuel and oil from the engine bay would wash off any paint in this area, leaving a rather tatty look. Di-electric fairings like the nose radome and the fin tip were painted with a brownish light grey (Revell 75) instead of black, reducing contrast and simulating bare and worn fiber glass. Small details like the white tips of the small wing fences and the underwing pylons were adapted from real-world Lansens.

After a light black ink wash, I emphasized single panels with Humbrol 125 and 165 on the upper surfaces and 147 and 196 underneath. Additionally, grinded graphite was used for weathering and a grimy look – an effective method, thanks to the kit’s fine raised panel lines. The silver wing leading edges were created with decal sheet material and not painted, a clean and convenient solution that avoids masking mess.

The ECM and chaff dispenser pods were painted in a slightly different shade of grey (FS 36440, Humbrol 40). As a subtle contrast the conformal belly tank was painted with Humbrol 247 (RLM 76), a tone that comes close to the Lansens’ standard camouflage from the Sixties’ green/blue livery, with a darker front end (Humbrol 145) and a bare metal tail section.

The cockpit interior was, according to pictures of real aircraft, painted in a greenish grey; I used Revell 67 (RAL 7009, Grüngrau) for most surfaces and slightly darker Humbrol 163 for dashboards and instrument panels. The landing gear wells as well as the flaps’ interior became Aluminum Bronze (Humbrol 56), while the landing gear struts were painted in a bluish dark green (Humbrol 195) with olive drab (Revell 46) wheel hubs - a detail seen on some real-life Saab 32s and a nice contrast to the light grey all around.

All markings/decals came from RBD Studio/Moose Republic aftermarket sheets for Saab 32 and 37. From the latter the low-viz national markings and the day-glo orange tactical codes were taken, while most stencils came from the Lansen sheet. Unfortunately, the Heller kit’s OOB sheet is pretty minimalistic – but the real A/S 32s did not carry many markings, anyway. Finally, the kit was sealed with matt acrylic varnish. As a confusing detail I gave the aircraft an explicit “16M” unit identifier, created with single black 4 mm letters/numbers. As a stark contrast and a modern peace-time element I also gave the Lansen the typical huge day-glo orange tactical codes on the upper wings that were carried by the Swedish interceptors of the time.

A relatively simple build, thanks to the resin conversion set – otherwise, creating a more or less believable J 32E from Heller’s A 32 kit is a tough challenge. Though expensive, the parts fit and work well, and I’d recommend the set, because the shape of the J 32B’s lower nose is quite complex and scratching the bigger jet pipe needs a proper basis. The modern low-viz livery suits the vintage yet elegant Lansen well, even though it reveals the aircraft’s bulk and size; in all-grey, the Lansen has something shark- or even whale-ish to it? The aircraft/livery combo looks pretty exotic, but not uncredible - like a proven war horse.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Lockheed P-80 Shooting Star was the first jet fighter used operationally by the United States Army Air Forces (USAAF) during World War II. Designed and built by Lockheed in 1943 and delivered just 143 days from the start of design, production models were flying, and two pre-production models did see very limited service in Italy just before the end of World War II. The XP-80 had a conventional all-metal airframe, with a slim low wing and tricycle landing gear. Like most early jets designed during World War II—and before the Allies captured German research data that confirmed the speed advantages of swept-wings—the XP-80 had straight wings similar to previous propeller-driven fighters, but they were relatively thin to minimize drag at high speed.

For the Luftwaffe the F-80E had become obsolete, and to reduce the number of operational aircraft types, the remaining German aircraft, a total of 34, were in 1965 passed through to the Türk Hava Kuvvetleri (Turkish air force) as part of international NATO military support, where they remained in service until 1974 and were replaced by third generation F-4E Phantom II fighter jets.

General characteristics:

Crew: 1

Length: 36 ft 9 1/2 in (11.23 m)

Wingspan: 37 ft 6 in (11.44 m) over tip tanks

Height: 13 ft 5 1/4 in (4.10 m)

Wing area: 241.3 sq ft (22,52 m²)

Empty weight: 10,681 lb (4.845 kg)

Max. takeoff weight: 18,464 lb (8.375 kg)

Zero-lift drag coefficient: 0.0134

Frontal area: 32 sq ft (3.0 m²)

Powerplant:

1× Allison J33-A-39 centrifugal compressor turbojet with 4,600 lbf (20 kN) dry thrust

and 27.0 kN (6,070 lbf) thrust with afterburning

Performance:

Maximum speed: 1,060 km/h (660 mph, 570 kn)

Cruise speed: 439 mph (707 km/h, 381 kn)

Range: 825 mi (1,328 km, 717 nmi)

Ferry range: 1,380 mi (2,220 km, 1,200 nmi)

Service ceiling: 50,900 ft (15,500 m)

Rate of climb: 7,980 ft/min (40.5 m/s)

Time to altitude: 20,000 ft (6,100 m) in 4 minutes 50 seconds

Lift-to-drag: 17.7

Wing loading: 51.3 lb/sq ft (250 kg/m²)

Thrust/weight: 0.249 dry

0.328 with afterburner

Armament:

4× 0.79 in (20 mm) M24 cannon (190 rpg)

2x wing tip auxiliary tanks with 225 US gal (187 imp gal; 850 l) each

Underwing hardpoints for a total ordnance load of 4,800 lb (2.200 kg), including

2× 1,000 lb (454 kg) bombs, up to 4× pods with nineteen unguided Mighty Mouse FFARs each,

and/or up to 8× 5” (127 mm) HVAR unguided air-to-ground rockets

The kit and its assembly:

The idea of a swept-wing F-80 had been lingering on my idea list for a while, and I actually tried this stunt before in the form of a heavily modified F-94. The recent “Fifties” group build at whatifmodellers.com and a similar build by fellow forum member mat revived the interest in this topic – and inspired by mat’s creation, based on a T-33 fuselage, I decided to use the opportunity and add my personal interpretation of the idea.

Having suitable donor parts at hand was another decisive factor to start this build: I had a Heller T-33 in store, which had already been (ab)used as a donor bank for other projects, and which could now find a good use. I also had an F-80 canopy left over (from an Airfix kit), and my plan was to use Saab J29 wings (from a Matchbox kit) because of their limited sweep angle that would match the post-WWII era well.

Work started with the fuselage; it required a completely new cockpit interior because these parts had already gone elsewhere. I found a cockpit tub with its dashboard from an Italeri F4U, and with some trimming it could be mounted into the reduced cockpit opening, above the OOB front landing gear well. The T-33’s rear seat was faired of with styrene sheet and later PSRed away. The standard nose cone from the Heller T-33 was used, but I added gun ports for the new/different cannon armament.

For a different look with an afterburner engine I modified the tail section under the stabilizers, which was retained because of its characteristic shape. A generous section from the tail was cut away and replaced with the leftover jet pipe from an Italeri (R)F-84F, slightly longer and wider and decorated with innards from a Matchbox Mystère IV. This change is rather subtle but changes the F-80 profile and appears like a compromise between the F-80 and F-94 arrangements.

The T-33 wings were clipped down to the connection lower fuselage part. This ventral plate with integral main landing gear wells was mounted onto the T-33 hull and then the Saab 29 wings were dry-fitted to check their position along the fuselage and to define the main landing gear wells, which had to be cut into them to match their counterparts from the aircraft’s belly.

Their exact position was eventually fixed when the new swept stabilizers, taken from a Hobby Boss F-86, were mounted to the tail. They match well with the swept wings, and for an odd look I kept their dihedral.

The fin was eventually replaced, too – mat’s build retained the original F-80 fin, but with all other surfaces swept I found that the fin had to reflect this, too. So, I implanted a shortened Italeri (R)F-84F fin onto the original base, blended with some PSR into the rest of the tail.

With all aerodynamic surfaces in place it was time for fine-tuning, and to give the aircraft a simpler look I removed the dog teeth from the late Tunnan's outer wings, even though I retained the small LERXs. The wing tips were cut down a little and tip tanks (probably drop tanks from a Hobby Boss F-5E) added – without them the aircraft looked like a juvenile Saab 32!

The landing gear was mostly taken over from the Heller T-33, I just added small consoles for the main landing gear struts to ensure a proper stance, because the new wings and the respective attachment points were deeper. I also had to scratch some landing gear covers because the T-33 donor kit was missing them. The canopy was PSRed over the new opening and a new ejection seat tailored to fit into the F4U cockpit.

A final addition was a pair of pods with unguided FFARs. AFAIK the Luftwaffe did not use such weapons, but they’d make thematically sense on a Fifties anti-bomber interceptor - and I had a suitable pair left over from a Matchbox Mystère IV kit, complete with small pylons.

Painting and markings:

Since the time frame was defined by the Fifties, early Luftwaffe fighters had to carry a bare metal finish, with relatively few decorations. For the F-80E I gave the model an overall base coat with White Aluminum from a Dupli Color rattle can, a very nice and bright silver tone that comes IMHO close to NMF. Panels were post-shaded with Revell 99 (Aluminum) and 91 (Iron Metallic). An anti-glare panel in front of the windscreen was painted in the Luftwaffe tone RAL 6014, Gelboliv (Revell 42).

For some color highlights I gave the tip tanks bright red (Feuerrot, RAL 3000; Revell 330) outer halves, while the inner halves were painted black to avoid reflections that could distract the pilot (seen on a real Luftwaffe T-33 from the late Fifties). For an even more individual touch I added light blue (Tamiya X-14, Sky Blue) highlights on the nose and the fin, reflecting the squadron’s color code which is also carried within the unit emblem – the Tamiya paint came closest to the respective decal (see below).

The cockpit interior was painted with zinc chromate green primer (I used Humbrol 80, which is brighter than the tone should be, but it adds contrast to the black dials on the dashboard), the landing gear wells were painted with a mix of Humbrol 80 and 81, for a more yellowish hue. The landing gear struts became grey, dry-brushed with silver, while the inside of the ventral air brakes were painted in Feuerrot, too.

Then the model received an overall washing with black ink to emphasize the recessed panel lines, plus additional panel shading with Matt Aluminum Metallizer (Humbrol 27001), plus a light rubbing treatment with grinded graphite that emphasized the (few leftover) raised panel lines and also added a dark metallic shine to the silver base. Some of the lost panel lines were simulated with simple pencil strokes, too.

The decals/markings primarily came from an AirDoc aftermarket sheet for late Fifties Luftwaffe F-84Fs. The tactical code (“BB-xxx” was then assigned to the WaSLw 10 as unit code, but this soon changed to a similar but different format that told about the unit’s task as well as the specific unit and squadron within it; this was replaced once more by a simple xx+yy code that was only connected to a specific aircraft with no unit reference anymore, and this format is still in use today) was puzzled together from single letters/digits from the same decal set. Some additional markings like the red band on the fuselage had to be scratched, but most stencils came from an all-bare-metal Luftwaffe F-84F.

After some more detail painting the model was sealed with semi-gloss acrylic paint, just the anti-glare panel and the di-electric fairings on the nose and the fin tip became matt.

A thorough kitbashing build, but the result looks quite plausible, if not elegant? The slightly swept wings suit the F-80 with its organic fuselage shape well, even though they reveal the designs rather baroque shape. There’s a sense of obsolescence about the F-80E, despite its modern features? The Luftwaffe markings work well on the aircraft, too, and with the red and blue highlights the machine looks more attractive despite its simple NMF livery than expected.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The OV-10 Bronco was initially conceived in the early 1960s through an informal collaboration between W. H. Beckett and Colonel K. P. Rice, U.S. Marine Corps, who met at Naval Air Weapons Station China Lake, California, and who also happened to live near each other. The original concept was for a rugged, simple, close air support aircraft integrated with forward ground operations. At the time, the U.S. Army was still experimenting with armed helicopters, and the U.S. Air Force was not interested in close air support.

The concept aircraft was to operate from expedient forward air bases using roads as runways. Speed was to be from very slow to medium subsonic, with much longer loiter times than a pure jet. Efficient turboprop engines would give better performance than piston engines. Weapons were to be mounted on the centerline to get efficient aiming. The inventors favored strafing weapons such as self-loading recoilless rifles, which could deliver aimed explosive shells with less recoil than cannons, and a lower per-round weight than rockets. The airframe was to be designed to avoid the back blast.

The MV-10Hs are expected to provide support for these ground units in the form of all-weather reconnaissance and observation, close air support and also forward air control duties for supporting ground units. Precision ground strikes and protection from enemy helicopters and low-flying aircraft were other, secondary missions for the modernized Broncos, which are expected to serve well into the 2040s. Exports or conversions of foreign OV-10s to the Black Pony standard are not planned, though.

General characteristics:

Crew: 2

Length: 42 ft 2½ in (12,88 m) incl. pitot

Wingspan: 45 ft 10½ in(14 m) incl. tip sails

Height: 15 ft 2 in (4.62 m)

Wing area: 290.95 sq ft (27.03 m²)

Airfoil: NACA 64A315

Empty weight: 9,090 lb (4,127 kg)

Gross weight: 13,068 lb (5,931 kg)

Max. takeoff weight: 17,318 lb (7,862 kg)

Powerplant:

2× General Electric CT7-9D turboprop engines, 1,305 kW (1,750 hp) each,

driving 8-bladed Hamilton Standard 8 ft 6 in (2.59 m) diameter constant-speed,

fully feathering, reversible contra-rotating propellers with metal hub and composite blades

Performance:

Maximum speed: 390 mph (340 kn, 625 km/h)

Combat range: 198 nmi (228 mi, 367 km)

Ferry range: 1,200 nmi (1,400 mi, 2,200 km) with auxiliary fuel

Maximum loiter time: 5.5 h with auxiliary fuel

Service ceiling: 32.750 ft (10,000 m)

13,500 ft (4.210 m) on one engine

Rate of climb: 17.400 ft/min (48 m/s) at sea level

Take-off run: 480 ft (150 m)

740 ft (227 m) to 50 ft (15 m)

1,870 ft (570 m) to 50 ft (15 m) at MTOW

Landing run: 490 ft (150 m)

785 ft (240 m) at MTOW

1,015 ft (310 m) from 50 ft (15 m)

Armament:

1x M197 3-barreled 20 mm Gatling cannon in a chin turret with 750 rounds ammo capacity

7x hardpoints for a total load of 5.000 lb (2,270 kg)

2x wingtip launch rails for AIM-9 Sidewinder AAMs

The kit and its assembly:

This fictional Bronco update/conversion was simply spawned by the idea: could it be possible to replace the original cockpit section with one from an AH-1 Cobra, for a kind of gunship version?

The basis is the Academy OV-10D kit, mated with the cockpit section from a Fujimi AH-1S TOW Cobra (Revell re-boxing, though), chosen because of its “boxy” cockpit section with flat glass panels – I think that it conveys the idea of an armored cockpit section best. Combining these parts was not easy, though, even though the plan sound simple. Initially, the Bronco’s twin booms, wings and stabilizer were built separately, because this made PSR on these sections easier than trying the same on a completed airframe. One of the initial challenges: the different engines. I wanted something uprated, and a different look, and I had a pair of (excellent!) 1:144 resin engines from the Russian company Kompakt Zip for a Tu-95 bomber at hand, which come together with movable(!) eight-blade contraprops that were an almost perfect size match for the original three-blade props. Biggest problem: the Tu-95 nacelles have a perfectly circular diameter, while the OV-10’s booms are square and rectangular. Combining these parts and shapes was already a messy PST affair, but it worked out quite well – even though the result rather reminds of some Chinese upgrade measure (anyone know the Tu-4 copies with turboprops? This here looks similar!). But while not pretty, I think that the beafier look works well and adds to the idea of a “revived” aircraft. And you can hardly beat the menacing look of contraprops on anything...

The exotic, so-called “tip sails” on the wings, mounted on short booms, are a detail borrowed from the Shijiazhuang Y-5B-100, an updated Chinese variant/copy of the Antonov An-2 biplane transporter. The booms are simple pieces of sprue from the Bronco kit, the winglets were cut from 0.5mm styrene sheet.

For the cockpit donor, the AH-1’s front section was roughly built, including the engine section (which is a separate module, so that the basic kit can be sold with different engine sections), and then the helicopter hull was cut and trimmed down to match the original Bronco pod and to fit under the wing. This became more complicated than expected, because a) the AH-1 cockpit and the nose are considerably shorter than the OV-10s, b) the AH-1 fuselage is markedly taller than the Bronco’s and c) the engine section, which would end up in the area of the wing, features major recesses, making the surface very uneven – calling for massive PSR to even this out. PSR was also necessary to hide the openings for the Fujimi AH-1’s stub wings. Other issues: the front landing gear (and its well) had to be added, as well as the OV-10 wing stubs. Furthermore, the new cockpit pod’s rear section needed an aerodynamical end/fairing, but I found a leftover Academy OV-10 section from a build/kitbashing many moons ago. Perfect match!

All these challenges could be tackled, even though the AH-1 cockpit looks surprisingly stout and massive on the Bronco’s airframe - the result looks stockier than expected, but it works well for the "Gunship" theme. Lots of PSR went into the new central fuselage section, though, even before it was mated with the OV-10 wing and the rest of the model.

Once cockpit and wing were finally mated, the seams had to disappear under even more PSR and a spinal extension of the canopy had to be sculpted across the upper wing surface, which would meld with the pod’s tail in a (more or less) harmonious shape. Not an easy task, and the fairing was eventually sculpted with 2C putty, plus even more PSR… Looks quite homogenous, though.

After this massive body work, other hardware challenges appeared like small distractions. The landing gear was another major issue because the deeper AH-1 section lowered the ground clearance, also because of the chin turret. To counter this, I raised the OV-10’s main landing gear by ~2mm – not much, but it was enough to create a credible stance, together with the front landing gear transplant under the cockpit, which received an internal console to match the main landing gear’s length. Due to the chin turret and the shorter nose, the front wheel retracts backwards now. But this looks quite plausible, thanks to the additional space under the cockpit tub, which also made a belt feed for the gun’s ammunition supply believable.

To enhance the menacing look I gave the model a fixed refueling boom, made from 1mm steel wire and a receptor adapter sculpted with white glue. The latter stuff was also used add some antenna fairings around the hull. Some antennae, chaff dispensers and an IR decoy were taken from the Academy kit.

The ordnance came from various sources. The Sidewinders under the wing tips were taken from an Italeri F-16C/D kit, they look better than the missiles from the Academy Bronco kit. Their launch rails came from an Italeri Bae Hawk 200. The quadruple Hellfire launchers on the underwing hardpoints were left over from an Italeri AH-1W, and they are a perfect load for this aircraft and its role. The LAU-10 and -19 missile pods on the stub wings were taken from the OV-10 kit.

Painting and markings:

Finding a suitable and somewhat interesting – but still plausible – paint scheme was not easy. Taking the A-10 as benchmark, an overall light grey livery (with focus on low contrast against the sky as protection against ground fire) would have been a likely choice – and in fact the last operational American OV-10s were painted in this fashion. But in order to provide a different look I used the contemporary USAF V-22Bs and Special Operations MC-130s as benchmark, which typically carry a darker paint scheme consisting of FS 36118 (suitably “Gunship Gray” :D) from above, FS 36375 underneath, with a low, wavy waterline, plus low-viz markings. Not spectacular, but plausible – and very similar to the late r/w Colombian OV-10s.

The cockpit tub became Dark Gull Grey (FS 36231, Humbrol 140) and the landing gear white (Revell 301).

The model received an overall black ink washing and some post-panel-shading, to liven up the dull all-grey livery. The decals were gathered from various sources, and I settled for black USAF low-viz markings. The “stars and bars” come from a late USAF F-4, the “IP” tail code was tailored from F-16 markings and the shark mouth was taken from an Academy AH-64. Most stencils came from another Academy OV-10 sheet and some other sources.

Decals were also used to create the trim on the propeller blades and markings on the ordnance.

Finally, the model was sealed with a coat of matt acrylic varnish (Italeri) and some exhaust soot stains were added with graphite along the tail boom flanks.

A successful transplantation – but is this still a modified Bronco or already a kitbashing? The result looks quite plausible and menacing, even though the TOW Cobra front section appears relatively massive. But thanks to the bigger engines and extended wing tips the proportions still work. The large low-pressure tires look a bit goofy under the aircraft, but they are original. The grey livery works IMHO well, too – a more colorful or garish scheme would certainly have distracted from the modified technical basis.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Yakovlev Yak-38 (Russian: Яковлева Як-38; NATO reporting name: "Forger") was the Soviet Naval Aviation's first and only operational VTOL strike fighter aircraft, in addition to being its first operational carrier-based fixed-wing aircraft. It was developed specifically for and served almost exclusively on the Kiev-class aircraft carriers.

Officially, all Ukrainian Yak-138 were scrapped until 1994, even though rumor has it that one or two airframes had been sold behind the scenes to China. In Russia only five specimen had survived, and since the spares situation was doubtful none could be kept in flying condition. One Yak-138 was eventually handed over to the Ulyanovsk Aircraft Museum, while the rest was either mothballed or scrapped, too. Unfortunately, the sole museum exhibit was lost in 1995 in a fire accident.

General characteristics:

Crew: One

Length (incl. pitot): 15.84 m (51 ft 10 1/2 in)

Wingspan: 8,17 m (26 ft 9 in)

Height: 4.19 m (14 ft 3 in)

Wing area: 24.18 m² (260.27 ft²)

Empty weight: 7,385 kg (16,281 lb)

Max. takeoff weight: 11,300 kg (28,700 lb)

Powerplant:

1x Kuznetsov NK-32L-2 turbofan engine, rated at 137 kN (31,000 lbf)

Performance:

Maximum speed: 1,176 km/h (730 mph; 635 knots) at sea level

Combat radius: 230 mi (200 nmi, 370 km) lo-lo-lo with 4,400 lb (2,000 kg) payload

Ferry range: 2,129 mi (1,850 nmi, 3,425 km)

Endurance: 1 hr 30 min (combat air patrol – 115 mi (185 km) from base)

Service ceiling: 51,200 ft (15,600 m)

Time to climb to 40,000 ft (12,200 m): 2 min 23 s

Armament:

1x GSh-23L 23mm machine cannon with 250 RPG under the fuselage

5 hardpoints with a total external capacity of

- 3.000 kg (6,600 lb) for C/STOL operations and

- 2.000 kg (4.400 lb) in VTOL mode

Provisions to carry combinations of various types of unguided rockets (up to 240 mm), anti-ship

or air-to-surface Kh-23 (AS-7 Kerry) missiles (together with a Delta N guidance pod), R-60,

R-60M (AA-8 Aphid) or R-73 (AA-11 Archer) air-to-air missiles; tactical nuclear bombs, general

purpose bombs of up to 500 kg (1.100 lb) caliber, or incendiary ZB-500 napalm tanks or up to

three PTB-800 drop tanks under the fuselage and the inner pair of wing pylons

The kit and its assembly:

Sixth contribution to the “Soviet” Group Build at whatifmodelers.com in early 2017, on pretty short notice since the GB had been coming to its end. This totally fictional aircraft was inspired CG illustrations that had been roaming the WWW for some time: a hybrid between a Yak-38 (mostly the tail section), mated with an AV-8B Harrier II (cockpit, wings, landing gear). This did not look bad at all, yet a bit weird, with lift engines added in front of the fin. Certainly not conformal with a good CG balance – but I liked the idea of a single-engine Forger. And actually, OKB Yakovlev had been considering this.

So, the basic idea was a Harrier/Yak-38 kitbash. But the more I thought about the concept, the more additional donor parts came into play. One major addition was the nose section from a MiG-27 – with its slanted nose it would offer the pilot an excellent field of view, and the aircraft would, as a front line attack plane like the Harrier, not carry a radar, so the Flogger’s nose shape was perfect.

Therefore, initial ingredients for the Yak-138 were:

- Rear fuselage, wings and tail from a Tsukuda Hobby/Kangnam/Revell Yak-38

- Mid-fuselage with air intakes and front vectoring nozzles from a Matchbox Sea Harrier

- Cockpit from an Academy MiG-27

Work started with the MiG-27 cockpit, which was more or less taken OOB (except for side consoles in the cockpit and different seat), and the Yak-38 the tail section, built in parallel. To my surprise the Forger fuselage was easier to combine with the Harrier than expected, even though the position of the right cuts took multiple measurements until I came up with a proper solution. Since the Harrier is overall shorter than the Yak-38, the latter’s fuselage had to be shortened. I retained the tail cone, the Forger’s vectoring nozzles and the landing gear wells – and a 2cm plug was taken out between them. Instead of the Harrier’s tandem landing gear arrangement with outriggers under the outer wings, this one was to receive a conventional landing gear for optional C/STOL operations with a higher ordnance load, so that the Yak-38 parts were a welcome basis. Once the fuselage’s underside was more or less complete, the upper rest of the Yak-38 fuselage could be cut to size and integrated into the lower half and the Harrier parts.

After the rear end was settled, the MiG-27 cockpit could be mounted to the front end, which was slightly shortened by 2-3mm (since the Flogger’s is markedly longer than the short Harrier nose). In order to change the overall look of the aircraft, I eventually dropped the Harrier intakes and decided to use the Flogger’s boxy air intakes instead. These are considerably smaller than the gaping Harrier holes, and blending the conflicting shapes into each other for a more or less consistent look took several PSR turns. But it worked, better than expected, and it changes the aircraft’s look effectively, so that almost anything Harrier-esque was gone.

Once the fuselage was completed, I realized that I could not use the Yak-38 wings anymore. They are already pretty small, but with the more voluminous Harrier and Flogger parts added to the aircraft, they’d just be too small!

What to do...? I checked the donor bank and – in order to add even more individual flavor – used a pair of double delta wings from a PM Model Su-15! But only the core of them was left after considerable modifications: The inner delta wing sections were cut off, as well as the tip sections and parts of the trailing edge (for a planform similar to the Yak-38’s wings). On the underside, the landing gear openings were filled up and wing tips from the Yak-38, with puffer jet nozzles, transplanted. The inner leading edges had to be re-sculpted, too. The Su-15 wing fences were kept - a welcome, very Soviet design detail.

A lot of work, but I think it paid out because of the individual shape and look of these “new” wings?

As a consequence of the new, bigger wings, the little Yak-38 stabilizers could not be used anymore, either. In order to keep the square wing shape, I used modified stabilizers from an Intech F-16C/D – their trailing edges were clipped, but the bigger span retained. Together with the characteristic OOB Yak-38 fin they work well, and all of the aerodynamic surfaces IMHO blend well into the overall design of the aircraft.

After the hull was complete, work on smaller things could start. Under the fuselage, a GSh-23-2 pod from a MiG-21 was added, as well as pylons from the Tsukuda Yak-38 under the wings and a donor part from the scrap box in ventral position.

The landing gear is a mix, too: the main struts come from the Yak-38, the balloon wheels from the Matchbox Harrier. The front landing gear comes from the Academy MiG-27, including the wheels with mudguards. It was just mounted in a fashion that it now retracts forward.

The Harrier vectoring nozzles were modified, too, the exhaust “grills” replaced by square, simple ducts, scratched from styrene profile and putty. Care was taken that the nozzles would remain moveable in the fuselage flanks – for later hover pictures. The Yak-38’s nozzles were retained, but since they can OOB only be mounted in a single, fixed position, I added a simple pin to each nozzle, together with two holes in the hull, so that positions can now be switched between hover and level flight.

All around the hull, finally some small details like pitots, blade antennae and air scoops were finally added, and the ordnance consists of a pair of unguided 57mm rocket pods and a pair of Kh-23 (AS-7 Kerry) guided missiles – the latter come from the Yak-38 kit, but they are very crude and their tail sections were modified in order to come (slightly) closer to reality.

Painting and markings:

As an aircraft of the Soviet Frontal Aviation in the late Eighties, I settled upon a typical, disruptive four-tone camouflage with blue undersides. Very conventional, but with an exotic VTOL model I thought that a subtle look would be appropriate – and also separate it from the Naval Yak-38 cousin.

Design benchmark is the scheme on a contemporary MiG-21bis from a Soviert Frontal Aviation unit, chosen because of the disruptive pattern. The tones are guesstimates, though, based on various similar aircraft in more or less weathered condition. I settled for:

- Humbrol 195 (Dark Satin Green)

- Humbrol 78 (RAF Interior Green)

- Modelmaster 2005 (Burnt Umber)

- Humbrol 119 (Light Earth)

- Humbrol 115 (Russian Blue) for the undersides

The cockpit was painted in Russian Cockpit Green, opf course. The landing gear and their respective wells in a mix of Aluminum and Khaki Drab (Humbrol 56 & 26), and the wheel discs became bright green (Humbrol 131). Several di-electric panels and antennae were painted in Humbrol 106 (RAF Ocean Grey).

The kit received a thin black ink wash, in order to emphasize the panel lines, and panel post-shading with subtly lighter tones of the basic colors. National markings, codes and emblems come from several aftermarket sheets, mostly from High Decal Line and Begemot.

After some soot stains (grinded graphite) had been added, the kit was sealed with matt acrlyic varnish (Italeri) and the ordnace added.

Messy work, but I am surprised how consistent and normal the resulting aircraft appears? From certain angles, my Yak-138 creation reminds a good deal of the stillborn Hawker P.1154 (no similarity intended, though), the SEPECAT Jaguar or rather exotic Soko J-22 Orao/IAR-93 Vultur fighter bomber. IMHO, there’s also some A-4 Skyhawk style to it, esp. in planview? Anyway, there’s still some good Yak-38 heritage recognizable, and the tactical Frontal Aviation paint scheme suits the aircraft well - looks like a serious mud mover.

+++ DISCLAIMER +++

Nothing you see here is real, even though the model, the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

A monitor is a class of relatively small warship that is lightly armoured, often provided with disproportionately large guns, and originally designed for coastal warfare. The term "monitor" grew to include breastwork monitors, the largest class of riverine warcraft known as river monitors and was sometimes used as a generic term for any turreted ship. In the early 20th century, the term "monitor" included shallow-draft armoured shore bombardment vessels, particularly those of the Royal Navy: the Lord Clive-class monitors carried guns that fired the heaviest shells ever used at sea and saw action against German targets during World War I.

Two small Royal Navy monitors from the First World War, Erebus and Terror survived to fight in the Second World War. When the requirement for shore support and strong shallow-water coastal defence returned, new monitors and variants such as coastal defence ships were built. Allied monitors saw service in the Mediterranean in support of the British Eighth Army's desert and Italian campaigns, and they were part of the offshore bombardment for the Invasion of Normandy in 1944.

On 12 June she returned to Portsmouth to rearm, but her guns were worn out again, so she was ordered to sail to Rosyth via the Straits of Dover. She evaded German coastal batteries, partly due to effective radar jamming, but hit a mine 28 miles off Harwich early on 13 June. The explosion ripped her bow apart, leaving a gaping leak, and she sank within just a couple of minutes. Only 57 men of Ludgar’s crew survived.

General characteristics:

Displacement: 9,090 long tons (9,185 t)

Length: 436 ft (133.1 m) overall

Beam: 97 ft (29.6 m)

Draught: 11 ft 8 in (3.6 m)

Complement: 224

Propulsion:

4× Babcock & Wilcox water-tube boilers, generating a combined 6,000 ihp (4,500 kW) via

triple-expansion steam engines with two shafts

Performance:

Top speed: 16.5 knots (30 km/h; 19 mph)

Range: 2,480 nmi (4,590 km; 2,850 mi)

Armament:

2× twin BL 15-inch L42 Mk I naval guns

8 × single QF 4-inch Mk V naval guns

2 × triple two-pounder (40 mm) anti-aircraft guns

10x single Oerlikon 20mm (0.787 in) anti-aircraft machine cannon

The kit and its assembly:

This was another submission for the "Gunships" group build at whatifmodellers.com in late 2021 - and what would such a competition be without a literal "gunship" in the form of a monitor ship? I had wanted to scratch such a vehicle for a while, and the GB was a good motivation to tackle this messy project.

The idea was to build a post-WWI monitor for the Royal Navy. From WWI, several such ships had survived and they were kept in reserve and service into WWII, some even survived this war after extensive use. However, the layout of a typical monitor ship, with low draft, a relatively wide hull and heavy armament for land bombardments, is rather special and finding a suitable basis for this project was not easy - and I also did not want to spend a fortune just in donor parts.

Then I recently came across Hobby Boss 1:700 kit of the USS Arizona (in its 1941 guise, w/o the hull barbettes), and after some comparison with real British monitors I found my starting point - and it was dirty cheap. Righteously, though, because the model is rather primitive, comparable with the simple Matchbox 1:700 waterline ships. There are also some dubious if not cringeworthy solutions. For instance, in order to provide the superstructures with open windows, the seams between the single levels run right through the windows! WTF? These seams can hardly be hidden, it's really an awkward solution. Another freak detail: the portholes on the lower hull protrude like pockmarks, in real life they'd the 1 1/2 ft (50 cm) deep?! Some details like the cranes on the upper deck are also very "robust", it is, in the end, IMHO not a good model. But it was just the starting for me for "something else"...

Modifications started with shortening the hull. Effectively, I cut out more then 3 1/2 in from the body, which is an integral part with side walls and main deck, basically any straight hull section disappeared, leaving only the bow and stern section. My hope was that these could be simple glued together for a new, wide hull - but this did not work without problems, because the rear section turned out to be a bit wider than the front. What to do...? I eventually solved this problem through wedge-shaped cuts inside of the integral railings. With some force, lots of glue and a stiffening structure inside the new hull could be completed.

Next the original turret bases had to disappear. as well as two of the four anchors and their respective chains on the foredeck. I retained as much of the original superstructure as possible, as it looked quite plausible even for a shorter ship, but since the complete hull basis for it had been gone, some adaptations had to be made. The main level was shortened a little and I had to scratch the substruction from styrene sheet, so that it would match with the stepped new hull.

At the same time I had to defined where the main turret(s) would be placed - and I settled for two, because the deck space was sufficient and the ship's size would make them appear plausible. A huge problem were the turret mounts, though - since a monitor has only little draught, the hull is not very deep. Major gun turrets are quite tall things, on battleships only the turret itself with the guns can be normally seen. But on a monitor they stand really tall above the waterline, and their foundation needs a cover. I eventually found a very nice solution in the form of 1:72 jet engine exhausts from Intech F-16s - I has a pair of these featureless parts in the spares box, and with some trimming and the transplantation of the original turtret mounts the result looks really good.

In the meantime the hull-mounted gun barbettes of USS Arizona had to disappear, together with the pockmarks on the hull. A messy affair with several PSR rounds. Furthermore, I added a bottom to the waterline hull, cut from 0.5 mm styrene sheet, and added plaster and lead beads as ballast.

Most of the superstructure, up to the conning tower, were mostly taken OOB. I just gave the ship a more delicate crane and re-arranged the lifeboats, and added two small superstructures to the rear deck as AA-stations, behind the rear tower - the space had been empty, because USS Arizona carried aircraft catapults there.

For the armament I used the OOB main turrets, but only used two of the three barrels (blanking of the opening in the middle). The 4 in guns were taken OOB to their original positions, the lighter 20 mm AA guns were partly placed in the original positions, too, and four of them went to a small platform at stern. For even more firepower I added two small turrets with three two-pounder AA guns, one on the rear deck and another right in front of the bridge.

Painting and markings:

The ship might look odd in its fragmented multi-colored camouflage - but this scheme was inspired by the real HMS Terror, an monitor that operated in early 1941 on the coast of North Africa and carried a similar makeshift camouflage. This consisted of a multitude of sand and brown tones, applied over an overall light grey base. I mimicked this design, initially giving the ship at first a uniform livery in 507b (Humbrol 64), together with an unpainted but weathered wooden deck (Humbrol 187 plus a washing with sepia ink) and horizontal metal surfaces either in a dark grey (507a, Humbrol 106) or covered with a red-brown coat of Corticene (Humbrol 62). As a personal detail I gave the ship false bow and stern waves on the hull in white. Another personal mod is the light grey (507c, Humbrol 147) conning tower - as mentioned in the background, I found that this light grey would be most useful when the ship itself was hidden behind the horizon from view, and only the conning tower would be directly visible in front of a hazy naval background.

On top of the grey hull I added several other paints, including khaki drab (FS 34087 from Modelmaster), red brown (FS 30118, Humbrol 118), khaki drill (Humbrol 72), mid stone (Humbrol 225) and light stone (Humbrol 121).

The model received an overall washing with dark grey and some rust stains with various brown and red shades of simple watercolors. The waterline was created with long and thin black 1.5 mm decal stripes, a very convenient and tidy solution. Finally, all parts were sealed with matt acrylic varnish, and after the final assembly I also added some rigging to the main mast with heated black sprue material.

Phew, this was quite a challenge, the result looks good overall, but I am not happy with the finish. Ships are not my strength and you see the Hobby Boss kit's flaws and weaknesses everywhere. Then add massive bodywork, and thing look even more shaggy (*sigh*). Nevertheless, the model looks like a typical monitor ship, and when I take the rather crappy USS Arizona kit as basis/benchmark, the "new" HMS Ludgar is not a bad achievement. It's surely not a crisp model, but the impression is good and this is what counts most to me.

Procor Limited (Union Tank Car)

56’9” 25,390gal Styrene Tank Car (DOT Class 117J100W)

PROX 22185

Blt. UTLX Manufacturing, Alexandria, LA, 04/23

CN MacMillan Yard, Vaughan, Ontario, Canada

July 23rd, 2023

1600 x 1050

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Brewster F2A Buffalo was an American fighter aircraft which saw service early in World War II. Designed and built by the Brewster Aeronautical Corporation, it was one of the first U.S. monoplanes with an arrester hook and other modifications for aircraft carriers. The Buffalo won a competition against the Grumman F4F Wildcat in 1939 to become the U.S. Navy's first monoplane fighter aircraft. Although superior to the Grumman F3F biplane it replaced, and the early F4Fs, the Buffalo was largely obsolete when the United States entered the war, being unstable and overweight, especially when compared to the Japanese Mitsubishi A6M Zero.

It is not entirely clear how many Japanese aircraft the Buffalo squadrons shot down, although RAAF pilots alone managed to shoot down at least 20. Eighty were claimed in total, a ratio of kills to losses of just 1.3 to 1. Additionally, most of the Japanese aircraft shot down by the Buffalos were bombers. The Hawker Hurricane, which fought in Singapore alongside the Buffalo from 20 January, also suffered severe losses from ground attack; most were destroyed.

General characteristics

Crew: one

Length: 26 ft 4 in (8.03 m)

Wingspan: 35 ft 0 in (10.67 m)

Height: 12 ft 0 in (3.66 m)

Wing area: 209 sq ft (19.4 m²)

Empty weight: 4,732 lb (2,146 kg)

Max takeoff weight: 7,159 lb (3,247 kg)

Powerplant:

1 × Wright R-1820-40 Cyclone 9 9-cyl air-cooled radial piston engine, 1,000 hp (745.7 kW)

Performance:

Maximum speed: 321 mph (517 km/h; 279 kn)

Cruise speed: 161 mph (140 kn; 259 km/h)

Range: 965 mi (839 nmi; 1,553 km)

Service ceiling: 33,200 ft (10,119 m)

Rate of climb: 2,440 ft/min (12.4 m/s)

Armament:

1× .50 in (12.7 mm) M2 Browning machine gun with 200 rounds and

1× .30 in (7.62 mm) AN Browning machine gun with 600 rounds,

both synchronized above the engine, firing through the propeller disc

2× 0.50 in (12.7 mm) M2 Browning machine guns with up to 450 RPG, one per wing

The kit and its assembly:

A simple and rather subtle what-if build – or that was what I thought it to be. When I read the Hawker Hurricane book from the “Planes and Pilots” series, I came across several aircraft in early SEAC markings and wondered about a Buffalo with blue 18” roundels – the RAF machines could have carried these markings in early 1942, and that became the model’s simple concept.

The kit is the Matchbox Buffalo. It is rather simple but has the benefit of being a de-navalized export version with a different cowling and tail. On the other side it also features some (IMHO wrong) details from the USN version like the cuffed Curtiss Electric propeller, which should rather be slightly smaller uncuffed Hamilton Standard propeller, the life raft behind the pilot and the open sight. However, I did not want to invest a fortune into a Hasegawa kit (which has the different tail as an optional part). The Hobby Boss F2A is another cheap alternative, but it is an American carrier aircraft, just like the Airfix kit that even comes with rivets galore as an unwelcome bonus. The vintage Aoshima kit is also there, but no option anymore. Special Hobby also does an F2A – but it’s again the American Navy aircraft, and quite expensive.

The Matchbox Buffalo was basically built OOB, I just drilled up the gun ports and tried to make the engine louvres edges a little crisper, so that they rather look like outlets and not like un-PSRed seams. The flaps were lowered for a lively look. A British reflector sight was added to the cockpit as well as a retrofitted rear-view mirror to the canopy, and struts for the roll bar were mounted behind the pilot seat instead of the OOB life raft from the US Navy F2A. The propeller was replaced, too, because the Matchbox kit’s cuffed version also belongs onto an USN aircraft and not an export B-239/339. A scratched pitot was added to the port wing.

Real trouble struck the project when the plastic turned out to be brittle of age – and this showed in inconvenient places. A major issue became the landing gear: the delicate struts broke off just as I tried to carefully release the parts from the sprues. And the rather massive canopy suddenly “silvered” from many vertical micro-cracks after I had glued it into place – before that it just had a slightly milky tint, so that I still used it but left the cockpit closed. However, once in place the front section almost went blind (at first, I thought this was humidity from ink washings!), and I considered a vacu canopy replacement – but this turned out to be prohibitively expensive, and I retained the flaw. The landing gear had to be modified to work. The struts were glued back together with plastic and super glue, while the covers were replaced with thinner styrene sheet and the supporting struts were replaced with thinner material, too.

Painting and markings:

Straightforward choice, even though with detail twists. The Buffalo received the contemporary RAF Temperate Land Scheme, with upper camouflage in Dark Green and Dark Earth. Since the aircraft was supposed to be relatively freshly re-painted, I used stronger shades for the green and the brown, namely IJA Green from Modelmaster and Humbrol 26 (khaki matt, which is less reddish than Dark Earth but slightly darker). The underside was painted in a non-regular Sky Blue, a color that was used instead of Sky or Medium Sea Grey on some SEAC fighter aircraft. I used Humbrol 47 (Sea Blue).

The model received a light black ink washing and some dry-brushed post-panel shading – even though it was not supposed to look too weathered or worn, since it would be a freshly revamped Singapore survivor in a new unit.

The small all-blue SEAC roundels and the fin flash came from an Academy P-47D, and they look odd on the Buffalo, making it look bigger as it actually is – but they could have been used on them, had the type “survived” some more months into 1942. White ID markings, e. g. bands on wings and tail surfaces, were not common at the model’s intended time frame yet, so I just gave it a propeller tip in Sky (Tamiya XF-21) and a fuselage band in the same color – the latter taken from the Matchbox OOB decal sheet and the color on the spinner adapted to the decal (with Humbrol 23).

The tactical code was created from single white 6 mm letters (from TL Modellbau). AFAIK, some SEAC units rather used such smaller letters in a non-regular font for their machines, you frequently find Spitfires and Hurricanes with similar codes, and it works well on the short Buffalo. The aircraft’s serial number is fictional (but close to the RAF Buffalos’ range) and was created with single black 2mm “W”s and numbers from a re-boxed Matchbox Gloster Gladiator (Revell).

After some soot stains around the guns and the exhausts with graphite, the model was sealed with matt acrylic varnish and a wire antenna made from heated black sprue material was added between the mast and the fin.

A relatively simple what-if interim build, building- and painting-wise, but the kit’s age caused some serious trouble that could only be partly mended. The landing gear could be saved, even though it shows its damage, but the blind clear windscreen really bugs me. Nevertheless, a “late” SEAC Buffalo is an interesting sight. A rather subtle whif, and the all-blue roundels suit it well.

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

+++ DISCLAIMER +++

Nothing you see here is real, even though the model, the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

In 1935, the German Reich Air Ministry (RLM, Reichsluftfahrtministerium) produced a requirement for a twin engined general purpose floatplane, suitable for patrol and for anti-shipping strikes with bombs and torpedoes. Proposals were received from Heinkel Flugzeugwerke and from the Blohm & Voss aircraft subsidiary Hamburger Flugzeugbau. On 1 November 1935, orders were placed with Heinkel and Hamburger Flugzeugbau for three prototypes each of their prospective designs, the He 115 and the Ha 140.

In total, about 100 He 115 B and Cs were upgraded to the D standard, which was finished by late 1943. The aircraft had its finest moment on anti-shipping operations against Arctic convoys from bases in northern Norway. Because the first convoys lacked air cover, the slow and lightly armed He 115 was less vulnerable than near the English coast. With the appearance of carriers and escort carriers, coupled with new Soviet heavy fighters like the Petlyakov Pe-3bis, Luftwaffe air superiority over the convoys was challenged and losses increased. The remaining He 115 B and Cs were consequently taken out of front line service in 1944 (but still served in search and rescue duties or in covert operations), but some of the He 115 D, esp. the more sophisticated D-4 and D-5 versions, soldiered on until 1945.

General characteristics:

Crew: 3 (pilot, bomb aimer, radio operator/rear gunner)

Length: 17.30 m (56 ft 9 in)

Wingspan: 22.28 m (73 ft 1 in)

Height: 6.60 m (21 ft 7.75 in)

Wing area: 87.5 m² (942 ft²)

Empty weight: 6,150 kg (13,564 lb)

Loaded weight: 12,200 kg (26,872 lb)

Powerplant:

2x BMW 801A 14-cylinder radial engine, 1,560 PS (1,539 hp, 1,147 kW) each

Performance:

Maximum speed: 403 km/h (250 mph)

Cruising speed: 365 km/h (227 mph)

Combat radius: 2,100 km (1,305 mi)

Service ceiling: 7,400 m (24,240 ft)

Wing loading: 139.4 kg/m² (28.2 lb/ft²)

Power/mass: 188 W/kg (0.116 hp/lb)

Armament:

1× fixed 20 mm (.787 in) MG 151/20 machine cannon under the front fuselage

1× flexible 13mm (.51 in) MG 131 machine gun in nose position

2× remote-controlled 13 mm (.51 in) MG 131 in FDSL 131/1B barbettes on the flanks

A total internal and external ordnance load of 2.000 kg (4.400 lb),

including up to 5× 250 kg (550 lb) bombs, or two such bombs and one torpedo of 800 kg (1,800 lb),

or one 920 kg (2,030 lb) sea mine in the Internal bomb bay.

A single Hs 294 guided glide torpedo, carried externally under the fuselage.

Alternatively, two underwing hardpoints could carry loads of up to 1.000 kg each, including iron bombs

and drop tanks (up to 900 l), Hs 293 guided glide bombs and unguided LT10 “Friedensengel” or LT 11

“Schneewittchen“ glide torpedoes.

The kit and its assembly:

A project I had on the agenda for a long time, even collecting donor parts and kits, but never had the drive to tackle it. But the “Amphibian” GB at whatifmodelers.com in late 2017 gave the impulse to finally build a model of the semi-fictional upgrade of the rather overlooked He 115 floatplane.

The whole thing is not purely fictional, since the BMW 801-powered He 115 D actually existed – but only as a single prototype. However, I wondered if some more upgrades would have been possible, and this led to this model.

The basic kit is Matchbox’ venerable He 115 B/C – a simple affair, but the He 115 is, to be honest, a simple aircraft, slender and big. In my case, it’s a Revell re-boxing, and the dark green styrene, in which it is moulded, turned out to be rather brittle, not making it a truly pleasant build (unlike the light grey styrene Revell frequently uses for the Matchbox re-issues, which is somewhat smoother).

As the only IP alternative there’s just the FROG mould (and, beware, it comes in a Revell re-boxing, too!), but I am not certain if it is anything good at all? The Matchbox kit appears to be a bit more modern, even though it is very, well, simple, and basically goes together well. But it needs attention at every seam, and the nose section is tricky to mount, too.

The model was built mostly OOB, but received some superficial mods and enhancements:

The BMW 801 engine transplants come from an Italeri Do 217 K-1, including the propellers and the engine mounts/adapters. The problem: the diameter of the 14-cylinder engines is markedly smaller than the original 9-cylinder radials, so that the “adapters” had to be used to bridge this difference. But even with this help, some serious sanding and PSR were necessary. Additionally, the BMW 801s are longer than the original engines, and the adapters push them forward even a little more. Thanks to the aircraft’s sheer size, this change of proportions is not too obvious.

The FDSL 131 barbettes were taken from an Italeri/Bilek Me 210 kit, which has been earmarked for a conversion (without them). In order to mount the weapon stations, holes were drilled into the He 115’s flanks and, internally, a construction to hold them in place, made from styrene strips, was added. The periscopic sights above and below the fuselage were scratched from round styrene strips. As a side effect, the original hole in the canopy for the manual machine gun was elegantly covered.

Under the nose, a fairing for the machine cannon was scratched – it consists of sections from an F-14 recce pod. The MK 103’s barrel was scratched from styrene, with an improvised muzzle brake. The manually operated MG 17 in the nose was replaced by a heavy MG 151/20.

The Hs 293 comes from a Revell He 177 A-6, together with its pylon. Just a small fairing (a modified 1:144 F-16 centerline drop tank) was added as a container for the wire spool. The drop tank on the other side is a find from the scrap box (IIRC, it belongs to an ART Model F8F Bearcat), modified with fins to (vaguely) resemble the Luftwaffe’s 900 l drop tanks for the Do 217 (which carried the Hs 293 in a similar fashion).

Under the floats I added scratched ice skids, a suitable upgrade for an aircraft operated in Norway and over the Northern Atlantic.

Inside of the cockpit, a few details were added like a floor for the bomb aimer figure, and some internal structures added (all scratched from cardboard, and styrene strips and bits), plus a rack for the bomb aimer from an Italeri He 111, IIRC. Not much effort was put into this area of the model, since the kit would have its canopies closed, and the many braces on the clear parts would preclude any good view, anyway.

Painting and markings:

Finally a good occasion to apply a scheme that some He 177 bombers, operated over the Atlantic, carried around 1944, consisting of a disruptive pattern of RLM02 greenish grey and (supposedly) dark green RLM 73, with hard edges and a low, hard waterline to light blue undersides.

However, based on the illustrations and a few real world He 177 color pics in that scheme, I rather changed the dark green tone to RLM 72, which is rather a dull, dark greyish olive drab than the bluish RLM 73. The undersides became Lichtblau, RLM 76 – another deliberate choice instead of the typical, brighter RLM 65 for sea-borne aircraft. The upper camouflage was taken around the wings’ leading edges and onto the floats.

The paints come from the different sources: for the RLM 02, I used Revell’s acrylic 45 (which is a tad more olive green and darker than RLM 02), the RLM 72 was approximated with Humbrol 66 (Olive Drab), which IMHO comes very close to the murky German tone. RLM 76 for the undersides comes from the ModelMaster Authentic line.

Due to the sheer size and the complex structure of the aircraft with its floats and the many struts, painting took some time. Everything was painted with brushes, freehanded, only for the waterline on the rear fuselage some tape was used.

After the basis scheme was settled and dry, the kit received a light black ink wash and some panel post-shading with lighter versions of the basic tones, including “pure” RLM 02 (Humbrol 240).

The markings/decals were puzzled together from the scrap box – on the upper surfaces, simplified white crosses with thin outlines were used, almost resulting in a low-viz livery, and the tactical code was created from single letters (TL Modellbau). The “angry penguin” emblem is not really correct, but I thought that it would be a suitable mascot for the aircraft and its theatre of operations.

After that the model received some weathering with dry-brushed light grey on the leading edges and walkway areas. Exhaust soot behind the engines was created with grinded graphite and also some dry-brushing with light grey, simulating burnt areas due to lean fuel mixtures. On the floats I also added a waterline – a frequent sign of wear on the He 115 when it would stay aground/afloat for some time, with a mix of greens and greys.

The interior became RLM 66 (Dark Grey, used Humbrol 67, which is supposed to be that tone), as a typical late-war color instead of the earlier RLM 02 in which the He 115 was originally delivered. Both Hs 293 and the drop tank were painted in RLM 65 (Humbrol 65), as a subtle color contrast to the otherwise rather subdued aircraft.

A relatively subtle conversion, of a rather overlooked (and actually pretty boring) aircraft. Looks more interesting now, I think, and everything that went into the conversion was picked from real life and mixed up for something new.

The longer, slender BMW 801 engines make the aircraft IMHO look more elegant and purposeful, and the barbettes, as well as the bigger guns in general, are a suitable upgrade, too. The Hs 293 might be a little over the top, but for a slightly futuristic Luft ‘46 touch it’s just the ticket – and from an ordnance load perspective it’s even plausible. And, finally, the special paint scheme (which is real, too) just underlines the modernization of the venerable aircraft type for the late 1944 era.

The big Army laser cannon that Kaneda busts out at the end of Akira, a landmark 1988 animated feature film. The Kaneda fig isn't anything special, he's just there to pose the weapon.

I took a Brickarms Heavy Laser Cannon prototype (with Viewfinder), drilled out the barrel and filed down the front of the viewfinder in order to insert trans-clear and trans-blue styrene rods, respectively. The battery pack is scratchbuilt from styrene, a cotter pin, insulated wire and craft ribbon. Then painted. I treated the trans styrene and viewfinder display with Future after dullcoating the entire thing.

+++ DISCLAIMER +++

Nothing you see here is real, even though the model, the conversion or the presented background story might be based on canonical facts. BEWARE!

KX-series droids, also referred to as "enforcer droids", were a model of security droid manufactured by Arakyd Industries on Vulpter that was in service to the Galactic Empire during the Galactic Civil War.

Some further self-sentient KX droids escaped the Imperial realm and successfully led rogue careers, e. g. among smugglers, in neutral systems and even as bounty hunters.

The kit and its assembly:

In a wake of Star Wars nostalgia I got myself a Bandai K-2SO kit from the Rogue One movie – one of those purchases you make with no real plan, rather with the motivation to “build something different” from it. Somehow I was apparently lucky to get hold of one of these as a direct import, since these Bandai kits are only sold in Japan due to copyright issues. It was, however, clear from the start that I would not build the K-2SO movie character from it, and I wanted to get away from the OOB kit and its dull grey livery. I rather planned a fictional alternative.

As such, I did not want to change too much. The KX series droid was to be easily recognized, and I did not have too many appropriate spare parts at hand to make major changes like a totally different head. Nevertheless, I delved through the mecha donor box and found a few suitable pieces – but at the core it’s still a regular KX series droid.

Mods include:

- Mirror foil reflectors in the eyes instead of the OOB decals

- A set of “headphones” with antennae (actually parts from an 1:100 VF-1S head unit)

- Some hydraulic actuators around the waist and under the chin that add more depth

Besides, the Bandai kit was a mostly pleasant build: it's technically a snap-fit kit, and you can put the character figure together quite quickly. I just did some PSR on the major hull joints, but that was no issue since I wanted to paint the figure, anyway. The kit even comes with stickers as an alternative to a sheet with water slide decals. And when you pay attention to cleaning the parts, and stick strictly(!) to the instructions, the whole thing goes together very well.

The only drawback is a somewhat soft styrene material (after all, this is a poseable action figure) that is not as durable as it should be - I had issues in two arm joints where the parts disintegrated upon the attempt to put them together. As a consequence, I had to repair the joints with super glue and fix the position.

Painting and markings:

Here’s the more obvious part – somehow I had the idea of giving this droid a red livery. I wanted an Imperial flavor, but something different from K-2SO’s cold black/metallic grey look. Maybe I was inspired by the Imperial Guards from TESB (Ep. 5)? However, I found a wine red droid interesting and suitable, and it certainly sets it apart from its standard black/grey brethren. Its actual role is left to the beholder, though, but with this subtle but striking paint scheme, it’s probably something special. ;-)

The model was fully (re-)painted – you can actually build this it as a simple snap-fit kit without need for painting at all. But since I did some light PSR work on some seams, painting had become a necessity.

The two basic colors are Humbrol 20 (Crimson Gloss enamel) and Revell 9 (Tar Black acrylic). Due to the figure’s large scale and a clean/clinical look (the Empire is certainly not untidy!) I did not add any paint effect to the glossy red areas.

The matt black sections, which more or less cover the structural parts under the red hull , received a light dry-brushing with Revell 77 (Staubgrau), so that the many surface details became more obvious. This effect was also added as a stylistic complement to the light reflexes on the glossy areas.

Due to the good finish of the paint I did not apply a final coat of varnish, just the decals on the grey "shoulder rings" were treated with matt acrylic varnish.

Well, not a truly simple project, but I like the outcome. The red livery changes the droid's look considerably, not certain if it looks better than the dark grey movie livery?

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background

The Focke Wulf Ta 338 originated as a response of request by the RLM in mid 1943 for an aircraft capable of vertical takeoff and landing (VTOL), optimized for the interceptor and point defense role and without a hazardous liquid rocket engine as means of propulsion. In the course of the year, several German manufacturers responded with a multitude of highly innovative if not unusual design, including Heinkel with the ducted fan project "Lerche", Rheinmetall-Borsig with a jet-powered tailsitter, and Focke Wulf. This company’s engineering teams submitted two designs: the revolutionary "Triebflügel" concept and the more conservative, yet still futuristic "P.03.10338" tail sitter proposal, conceived by Focke Wulf’s leading engineer Kurt Tank and Walter Kappus from BMW, responsible for the engine development.

In mid 1945, in the advent of defeat, further tests of the Ta 338 were stopped. I./EK338 was disbanded in March 1945 and all machines retreated from the Eastern front, while II./EK338 kept defending the Ruhrgebiet industrial complex until the Allied invasion in April 1945. Being circled by Allied forces, it was not possible to evacuate or destroy all remaining Ta 338s, so that at least two more or less intact airframes were captured by the U.S. Army and later brought to the United States for further studies.

General characteristics:

Crew: 1

Length/height on the ground: 10.40 m (34 ft 2 in)

Wingspan: 10.50 m (34 ft 5 in)

Fin span: 4:07 m (13 ft 4 in)

Wing area: 18.30 m² (196.99 ft²)

Empty weight: 11,599 lb (5,261 kg)

Loaded weight: 16,221 lb (7,358 kg)

Max. takeoff weight: 16,221 lb (7,358 kg)

Powerplant:

1× BMW 803 A-2 28-cylinder, liquid-cooled four-row radial engine,

rated at 4.100 hp (2.950 kW) and at 4.500 hp (3.308 kW) with emergency boost.

4x Schmidding SG 34 solid fuel booster rockets, 4.9 kN (1,100 lbf) thrust each, or

2x 9.8 kN (2,203 lbf) solid fuel booster rockets

Performance:

Maximum speed: 860 km/h (534 mph)

Cruise speed: 650 km/h (403 mph)

Range: 750 km (465 ml)

Service ceiling: 43,300 ft (13,100 m)

Rate of climb: 10,820 ft/min (3,300 m/min)

Wing loading: 65.9 lb/ft² (322 kg/m²)

Armament:

No internal armament, any weapons were to be mounted on three hardpoints (one under the fuselage for up to 1.000 kg (2.200 lb) and two under the outer wings, 500 kg (1.100 lb) each. Total ordnance was limited to 1.000 kg (2.200 lb).

Various armament and equipment sets (Rüstsätze) were tested:

R1 with 4× 20 mm (.79 in) MG 151/20 cannons

R2 with 2x 30 mm (1.18 in) MK 213C cannons

R3 with 48x 73 mm (2.874 in) Henschel Hs 297 Föhn rocket shells

R4 with 66x 55 mm (2.165 in) R4M rocket shells

R5 with a single 1.000 kg (2.200 lb) bomb under the fuselage

R6 with an underfuselage pod with one Rb 20/20 and one Rb 75/30 topographic camera

The kit and its assembly:

This purely fictional kitbashing is a hardware tribute to a highly inspiring line drawing of a Fw 190 VTOL tailsitter – actually an idea for an operational RC model! I found the idea, that reminded a lot of the Lockheed XFV-1 ‘Salmon’ prototype, just with Fw 190 components and some adaptations, very sexy, and so I decided on short notice to follow the urge and build a 1:72 version of the so far unnamed concept.

What looks simple (“Heh, it’s just a Fw 190 with a different tail, isn’t it?”) turned out to become a major kitbashing. The basis was a simple Hobby Boss Fw 190 D-9, chose because of the longer tail section, and the engine would be changed, anyway. Lots of work followed, though.

The wings were sliced off and moved upwards on the flanks. The original tail was cut off, and the cruciform fins are two pairs of MiG-21F stabilizers (from an Academy and Hasegawa kit), outfitted with reversed Mk. 84 bombs as aerodynamic fairings that carry four small wheels (from an 1:144 T-22M bomber) on scratched struts (made from wire).

The cockpit was taken OOB, only a pilot figure was cramped into the seat in order to conceal the poor interior detail. The engine is a bash from a Ju 188’s BMW 801 cowling and the original Fw 190 D-9’s annular radiator as well as a part of its Jumo 213 cowling. BMW 801 exhaust stubs were inserted, too, and the propeller comes from a 1:100 VEB Plasticart Tu-20/95 bomber.

Since the BMW 803 had liquid cooling, radiators had to go somewhere. The annular radiator would certainly not have been enough, so I used the space in the wings that became available through the deleted Fw 190 landing gear (the wells were closed) for additional radiators in the wings’ leading edges. Again, these were scratched with styrene profiles, putty and some very fine styrene mesh.

As ordnance I settled for a pair of gun pods – in this case these are slipper tanks from a Hobby Boss MiG-15, blended into the wings and outfitted with hollow steel needles as barrels.

Painting and markings:

Several design options were possible: all NMF with some colorful markings or an overall RLM76 finish with added camouflage. But I definitively went for a semi-finished look, inspired by late WWII Fw 190 fighters.

For instance, the wings’ undersides were partly left in bare metal, but the rudders painted in RLM76 while the leading edges became RLM75. This color was also taken on the wings’ upper sides, with RLM82 thinly painted over. The fuselage is standard RLM76, with RLM82 and 83 on the upper side and speckles on the flanks. The engine cowling became NMF, but with a flashy ‘Hartmann Tulpe’ decoration.

Further highlights are the red fuselage band (from JG300 in early 1945) and the propeller spinner, which received a red tip and segments in black and white on both moving propeller parts. Large red “X”s were used as individual aircraft code – an unusual Luftwaffe practice but taken over from some Me 262s.

After a light black ink wash some panel shading and light weathering (e.g. exhaust soot, leaked oil, leading edges) was done, and the kit sealed under matt acrylic varnish.

Building this “thing” on the basis of a line drawing was real fun, even though challenging and more work than expected. I tried to stay close to the drawing, the biggest difference is the tail – the MiG-21 stabilizers were the best option (and what I had at hand as donation parts), maybe four fins from a Hawker Harrier or an LTV A-7 had been “better”, but now the aircraft looks even faster. ;)

Besides, the Ta 338 is so utterly Luft ’46 – I am curious how many people might take this for real or as a Hydra prop from a contemporary Captain America movie…

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The TIE/LN starfighter, or TIE/line starfighter, simply known as the TIE Fighter or T/F, was the standard Imperial starfighter seen in massive numbers throughout most of the Galactic Civil War and onward.

The TIE Fighter was manufactured by Sienar Fleet Systems and led to several upgraded TIE models such as TIE/sa bomber, TIE/IN interceptor, TIE/D Defender, TIE/D automated starfighter, and many more.

The TIE/E played a central role in the Empire's campaign against rogue Grand Admiral Demetrius Zaarin, and mixed Defender and Escort units participated in several other battles, including the Battle of Endor. The TIE Escort continued to see limited use by the Imperial Remnant up to at least 44 ABY, and was involved in numerous conflicts, including the Yuuzhan Vong War..

The kit and its assembly:

Another group build contribution, this time to the Science Fiction GB at whatifmodelers.com during summer 2017. Originally, this one started as an attempt to build a vintage MPC TIE Interceptor kit which I had bought and half-heartedly started to build probably 20 years ago. But I did not have the right mojo (probably, The Force was not strong enough…?), so the kit ended up in a dark corner and some parts were donated to other projects.

The sun collectors were still intact, though, and in the meantime I had the idea of reviving the kit’s remains, and convert it into (what I thought was) a fictional TIE Fighter variant with three solar panels. For this plan I got myself another TIE Interceptor kit, and stashed it away, too. Mojo was still missing, though.

Well, then came the SF GB and I took it as an occasion to finally tackle the build. But when I prepared for the build I found out that my intended design (over the years) more or less actually existed in the Star Wars universe: the TIE/D Defender! I could have built it with the parts and hand and some improvisation, but the design similarity bugged me. Well, instead of a poor copy of something that was more or less clearly defined, I rather decided to create something more individual, yet plausible, from the parts at hand.

The model was to stay a TIE design, though, in order to use as much donor material from the MPC kits as possible. Doing some legwork, I settled for a heavy fighter – bigger than the TIE Interceptor and the TIE/D fighter, a two-seater.

Working out the basic concept and layout took some time and evolved gradually. The creative spark for the TIE/E eventually came through a Revell “Obi Wan’s Jedi Starfighter” snap fit kit in my pile – actually a prize from a former GB participation at phoxim.de (Thanks a lot, Wolfgang!), and rather a toy than a true model kit.

The Jedi Fighter was in so far handy as it carries some TIE Fighter design traits, like the pilot capsule and the characteristic spider web windscreen. Anyway, it’s 1:32, much bigger than the TIE Interceptor’s roundabout 1:50 scale – but knowing that I’d never build the Jedi Starfighter OOB I used it as a donor bank, and from this starting point things started to evolve gradually.

Work started with the cockpit section, taken from the Jedi Starfighter kit. The two TIE Interceptor cockpit tubs were then mounted inside, staggered, and the gaps to the walls filled with putty. A pretty messy task, and once the shapes had been carved out some triangular tiles were added to the surfaces – a detail I found depicted in SW screenshots and some TIE Fighter models.

Another issue became the crew – even though I had two MPC TIE Interceptors and, theorectically, two pilot figures, only one of them could be found and the second crewman had to be improvised. I normally do not build 1:48 scale things, but I was lucky (and happy) to find an SF driver figure, left over from a small Dougram hoovercraft kit (from Takara, as a Revell “Robotech” reboxing). This driver is a tad bigger than the 1:50 TIE pilot, but I went with it because I did not want to invest money and time in alternatives. In order to justify the size difference I decided to paint the Dougram driver as a Chiss, based on the expanded SW universe (with blue skin and hair, and glowing red eyes). Not certain if this makes sense during the Battle of Endor timeframe, but it adds some color to the project – and the cockpit would not be visible in much detail since it would be finished fully closed.

Reason behind the closed canopy is basically the poor fit of the clear part. OOB, this is intended as an action toy – but also the canopy’s considerable size in 1:50 would prevent its original opening mechanism.

Additional braces on the rel. large window panels were created with self-adhesive tape and later painted over.

The rear fuselage section and the solar panel pylons were scratched. The reactor behind the cockpit section is actually a plastic adapter for water hoses, found in a local DIY market. It was slightly modified, attached to the cockpit “egg” and both parts blended with putty. The tail opening was closed with a hatch from the OOB TIE Interceptor – an incidental but perfect match in size and style.

The three pylons are also lucky finds: actually, these are SF wargaming/tabletop props and would normally be low walls or barriers, made from resin. For my build, they were more or less halved and trimmed. Tilted by 90°, they are attached to the hull with iron wire stabilizers, and later blended to the hull with putty, too.

Once the cockpit was done, things moved more swiftly. The surface of the hull was decorated with many small bits and pieces, including thin styrene sheet and profiles, steel and iron wire in various strengths, and there are even 1:72 tank tracks hidden somewhere, as well as protective caps from syringes (main guns and under the rear fuselage). It’s amazing how much stuff you can add to such a model – but IMHO it’s vital in order to create some structure and to emulate the (early) Star Wars look.

Painting and markings:

The less spectacular part of the project, even though still a lot of work because of the sheer size of the model’s surface. Since the whole thing is fictional, I tried to stay true to the Imperial designs from Episode IV-VI and gave the TIE/E a simple, all-light grey livery. All basic painting was done with rattle cans.

Work started with a basic coat of grey primer. On top of that, an initial coat of RAL 7036 Platingrau was added, esp. to the lower surfaces and recesses, for a rough shading effect. Then, the actual overall tone, RAL 7047, called “Telegrau 4”, one of Deutsche Telekom’s corporate tones, was added - mostly sprayed from abone and the sides onto the model. Fuselage and panels were painted separately, overall assembly was one of the final steps.

The solar panels were to stand out from the grey rest of the model, and I painted them with Revell Acrylic “Iron Metallic” (91) first, and later applied a rather rich wash with black ink , making sure the color settled well into the many small cells. The effect is pretty good, and the contrast was slightly enhanced through a dry-brushing treatment.

Only a few legible stencils were added all around the hull (most from the scrap box or from mecha sheets), the Galactic Empire Seal were inkjet-printed at home, as well as some tactical markings on the flanks, puzzled together from single digits in "Aurebash", one of the Imperial SW languages/fonts.

For some variety and color highlights, dozens of small, round and colorful markings were die-punched from silver, yellow, orange, red and blue decal sheet and were placed all over the hull - together with the large panels they blur into the the overall appearance, though. The hatches received thin red linings, also made from generic decals strips.

The cockpit interior was a bit challenging, though. Good TIE Fighter cockpit interior pictures are hard to find, but they suggest a dark grey tone. More confusingly, the MPC instructions call for a “Dark Green” cockpit? Well, I did not like the all-grey option, since the spaceship is already monochrome grey on the outside.

As a compromise I eventually used Tamiya XF-65 "Field Grey". The interior recieved a black ink in and dry-brushing treatment, and some instruments ansd screens were created with black decal material and glossy black paint; some neon paint was used for sci-fi-esque conmtraol lamps everywhere - I did not pay too much intention on the interior, since the cockpit would stay closed, and the thick clear material blurs everything inside.

Following this rationale, the crew was also painted in arather minimal fashion - both wear a dark grey uniform, only the Chiss pilot stands aout with his light blue skin and the flourescent red eyes.

After an overall black ink wash the model received a dry brusing treatment with FS 36492 and FS 36495, for a weathered and battle-worn look. After all, the "Vehement" would not survive the Ballte of Endor, but who knows what became of TIE/E "801"'s mixed crew...?

Finally, the kit was sealed with matt acrylic varnish, and some final cosmetic corrections made.

The display is a DIY creation, too, made from a 6x6" piece of wood, it's edges covered with edgebonder, a steel wire as holder, and finally the display was paited with semi-matt black acrylic paint from the rattle can.

A complex build, and the TIE/E more or less evolved along the way, with only the overall layout in mind. Work took a month, but I think it was worth the effort. This fantasy creation looks pretty plausible and blends well into the vast canonical TIE Fighter family - and I am happy that I finally could finish this mummy project, including the surplus Jedi Starfighter kit which now also find a very good use!

An epic one, and far outside my standard comfort zone. But a wothwhile build!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Hawker Fury was a British biplane fighter aircraft used primarily by the Royal Air Force in the 1930s. It was a development of the earlier Hawker F.20/27 prototype fighter, replacing the radial engine of the F.20/27 with the new Rolls-Royce F.XI V-12 engine (later known as the Rolls-Royce Kestrel), which was also used by Hawker's new light bomber, the Hawker Hart. The new fighter prototype, known as the Hawker Hornet, first flew at Brooklands, Surrey, in March 1929. The Hornet was a single-engine biplane, with single bay wings. It was initially powered by a 420 hp (313 kW) Rolls-Royce F.XIC engine enclosed by a smooth, streamlined cowling, but was quickly re-engined with a 480 hp (358 kW) Kestrel IS.

The prototype was evaluated against the similarly powered Fairey Firefly II, being preferred because of its better handling and its all-metal structure, compared with the mainly wooden construction of the Firefly.

The Hornet was eventually won the competition and was purchased by the Air Ministry in early 1930. It was, however, subjected to more tests, with a small initial production order for 21 aircraft placed during 1930. At this stage the Hornet was renamed Fury, as the Air Ministry wanted fighter names that "reflected ferocity". The ultimate production Fury Mk. I made its maiden flight at Brooklands on 25 March 1931.

The other active Yugoslav Fury squadron at the time of the invasion strafed enemy tanks and ground forces, some aircraft being lost to ground fire and one was destroyed in a dogfight with an Italian Fiat CR.42. The rest of the Yugoslav Furies were destroyed at the time of Armistice on 15 April or when they became unserviceable.

General characteristics:

Crew: 1

Length: 26 ft 7 in (8.11 m)

Wingspan: 30 ft 0 in (9.14 m)

Height: 10 ft 2 in (3.10 m)

Wing area: 252 sq ft (23.4 m²)

Empty weight: 2,9514 lb (1,340 kg)

Max takeoff weight: 3,814 lb (1,732 kg)

Powerplant:

1× Bristol Mercury IX 9-cylinder air-cooled radial piston engine, 830 hp (620 kW)

Performance:

Maximum speed: 253 mph (407 km/h, 220 kn) at 14,500 ft (4,420 m)

Range: 270 mi (430 km, 230 nmi)

Service ceiling: 32,800 ft (10,000 m)

Time to altitude: 3 min 35 sec. to 10,000 ft (3,000 m)

Armament:

4× 0.303 in (7.7 mm) Browning machine guns; two in the upper front fuselage, synchronized to fire

through the propeller disc with 600 RPG, plus one with 400 RPG beneath each lower wing

The kit and its assembly:

This quick build was based on the remnants of a Matchbox Hawker Fury biplane, which had donated its engine to another build, and leftover pieces from at least two Matchbox Gloster Gladiator kits, all mashed into one to create a fictional late Fury variant with a radial engine and some other updates. The Fury kit is a late Revell re-boxing, and while it retained the crisp details of the original, the molds seem to have suffered a little because the fuselage halves did not fit well and called for considerable PSR.

The Fury – or what was left of it – was built OOB, I just had to improvise the cowling ahead of the cockpit and scratch a front end to replace the inline engine. This was done with a piece from a bulbous (probably 1:48) drop tank, which was tailored to take the upper wing struts, and the rest of the fuselage was sculpted with 2C putty around an engine mount at the core, which was made from styrene profiles.

The different engine was 100% taken from a Matchbox Gladiator, even though I added a matching grid from another 9-cylinder radial for a different look. The three-blade propeller is new, too, probably from a Hobby Boss Fw 190A. From another Gladiator came the underwing machine gun pods as well as the Dowty wheels, which look more modern than the Fury’s OOB wheels. For an even more modernized look I replaced the Fury’s tailskid with a self-castoring tailwheel – apparently from a Gladiator, too.

The exhaust pipes were scratched from wire, the carburetor intake for the Mercury engine is a piece of sprue and the ventral oil cooler is a piece from a backrest (from a Matchbox Heinkel 70).

Painting and markings:

While the idea of an update Fury was quickly settled and defined by the ingredients at hand, finding a suitable operator was not an easy task. I considered various options and eventually settled for Yugoslavia, because this country was major Fury operator and I had appropriate national markings at hand.

The tri-color camouflage was based on the individual und very disruptive schemes that Yugoslavian Hawker Hurricanes carried. Information concerning the colors is quite contradictive, but AFAIK the schemes consisted of a yellowish sand brown, a medium khaki green and a dark, reddish brown, over light blue undersides with a low, wavy waterline raising from the wings to the stabilizers. Every aircraft carried a different pattern, and some machines of British origin also carried the former Temperate Land Scheme (Dark Green/Dark Earth/alu dope undersides), at least for a while.

I used Humbrol 63 (Sand), Modelmaster 2027 (FS 34096, Dark Olive) and Modelmaster 2106 (Burnt Umber), over Humbrol 87 (Steel Grey), because I wanted colors with good contrast from each other. The cockpit interior became anthracite (Revell 09), while the wing struts were painted in a dirty black (Revell 06).

The “windmill” roundels for the wings came from an Xtradecal sheet for Bristol Blenheims, the small fin flash was created with single decal stripes in red, white and blue, trying to match the roundels’ colors. The roman codes were typical for the Hurricanes between 1938-40 and created with single white letters from TL Modellbau. According to the typical Yugoslavian liveries of the era, the aircraft did, beyond national markings and tactical codes, not carry any colorful decoration, but I could not resist and added small unit badges in front of the fin flash.

The model received a light ink washing to emphasize the nice fabric structure on the wings, as well as some post-shading and weathering through dry-brushing with beige. Finally, the model was sealed with matt acrylic varnish and the rigging was added, created with heated and stretched black sprue material.

A relatively simple and quick build, and an attempt to “create something plausible” from leftover stuff. While Yugoslavia is not the most exotic operator of the Fury, I think that the fictional aircraft looks good in these colors and markings, even though the bulky radial really kills the Fury’s elegant lines, esp. its streamlined nose section. It looks quite backdated and reminds of a juvenile Fairey Swordfish?

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

Airbus Helicopters Tiger, formerly known as the Eurocopter Tiger, is a four-bladed, twin-engined attack helicopter, which first entered service in 2003. It is manufactured by Eurocopter (now Airbus Helicopters), the successor company to Aérospatiale's and DASA's respective helicopter divisions, which designate it as the EC665. In Germany and Australia it is known as the 'Tiger'; in France and Spain it is called the 'Tigre'.

In February 2016, the first of twelve newly built Tiger KWS was delivered to the German Bundeswehr and allocated to Luftwaffe and the Marineflieger units (each receiving six). Eight standard UHTs were to be updated until 2019, too. After initial trials 2016 on board of the German fregate "Bayern" in the course of the peacekeeping Operation Atalanta against pirates at the coast of Somalia, France became interested in the Artemis system, too, and considered the procurement of eight navalized and updated Tigers for the Aéronavale.

General characteristics:

Crew: Two (pilot and weapon systems officer)

Length: 13.21 m fuselage (43 ft 3 1/4 in)

Rotor diameter: 13.00 m (42 ft 8 in)

Disc area: 133 m² (1,430 ft²)

Height: 5.18 m (17 ft 11 in) with radome mast,

3.83 m (12 ft 7 in) w/o

Internal fuel capacity: 1,080 kg (2,380 lb)

Empty weight: 3,060 kg (6,750 lb)

Loaded weight: 5,090 kg (11,311 lb)

Max. takeoff weight: 6,000 kg (13,000 lb)

Powerplant:

2× MTU Turbomeca Rolls-Royce MTR390-G turboshaft engines, 1.102 kW (1.500 shp) each

Performance:

Maximum speed: 290 km/h (157 knots, 181 mph)

Range: 800 km (430 nm, 500 mi) in combat configuration

1,300km with external tanks at the inboard stations

Service ceiling: 4,000 m (13,000 ft)

Rate of climb: 10.7 m/s (2,105 ft/min)

Power/mass: 0.23 hp/lb (0.38 kW/kg)

Armament:

Four stub wing hardpoints for e.g. 12.7mm or 27 mm autocannon pods, 68 mm (2.68 in) SNEB or

70 mm (2.75 in) Hydra 70 unguided rockets pods, AGM-65 Maverick guided missiles or starters with 4x

PARS 3 LR and/or HOT3 anti-tank missiles; additionally, the German navy helicopters could carry up to

four Sea Skua missiles against sea targets

The kit and its assembly:

The second of my Italeri Tiger helicopters that I had purchased in a lot without a real plan some years ago. This one was simply spawned by the question what a) an updated UHT with a radar system like the AH-64D and b) a German Marineflieger UHT would look like? After the German navy got rid of their Tornados, what could be the more compact and economical alternative? This model combines these questions, and as a whif there was even a bit more to it.

The Italeri kit itself ain’t bad, but it has raised details and fit, esp. around the engines and the rotor mast, is rather dubious. PSR is a must. Anyway, it was built more or less OOB, the only changes are the Fenestron (transplanted wholesale from a Revell EC 135) with a corresponding movement of the stabilizers forward, the radome from an Academy AH-64D and the re-located Osiris optical system to the chin. The latter necessitated a fairing, which consists of a piece from a drop tank half.

Since I wanted to add Sea Skuas under the stub wings (taken from an Italeri 1:72 NATO weapon set), I also added a small thimble radome for an illumination radar on top of the nose. This subtly changes the Tiger's profile and adds a purposeful, Mi-28-ish look. Some blade antennae were re-located and radar warning sensors added, as well as a pitot made from thin wire in front of the cockpit.

Beyond the Sea Skuas I gave the model a single AIM-9 Sidewinder with a mathcing launch rail and a scratched gun pod, made from a Soviet GSh-23-2 pod with a single gun barrel (a hollow steel needle).

For later display and beauty pics, a vertical styrene tube was added into the model's center of gravity as an adapter for a holder.

Painting and markings:

The late German Marineflieger Tornados wore some interesting camouflage schemes under the Norm 87 scheme, and I wanted something similar for this navalized Tiger. However, a direct adaptation of the Tornados' scheme and its murky colors (RAL 7009, 7012 and 5008) appeared too dark for the smaller helicopter, lacking contrast that would help breaking up the outlines against sky and ground.

An alternative would have been RAL 7030, 7009 and 7012, but I used this one already on another Marineflieger whif (an Aero L-39 target tug). Another potential option was RAL 7030, 7000 and 7012 (incl. a bluish grey tone "Fehgrau", which is used uniformly on the German navy's ships and on some Marineflieger Do-28D Skyservants and Do 228s operated in the pollution control role), but this would rather have been suitable for a fighter aircraft, operating at medium to high altitudes. For "ground work", both options were IMHO too bright.

I eventually went back to the Tornado colors and replaced the RAL 7012 (Basaltgrau, very similar to Dark Sea Grey) with RAL 7030 (Steingrau, a brownish light grey). This resulted in a good contrast with the RAL 7009 (Grüngrau) and RAL 5008 (Graublau), and I kept the more or less naval color palette with grey/green/blue tones - even though and AFAIK, no German naval aircraft ever carried such a scheme. Still looks quite convincing.

The camouflage pattern was adopted from the land-based German Tigers, just the colors were replaced. I used Revell 75, 67 and a 1:1 mix of Humbrol 77 and 79. The cockpit interior became medium grey (Revell 47), the rotor blades Anthrazit (Revell 9).

The kit received a light wash with black ink and some panel post-shading.

The German roundels, flags as well as the tactical codes were created with material from TL Modellbau. The "MARINE" marking on the IR dampers was made up with single black 3mm letters, also with TL Modellbau material. A few stencils were taken from the OOB sheet, and some additional inscriptions were gathered from an 1:72 MiG-21 sheet from Begemot or simply painted. Finally, everything was sealed with matt acrylic varnish.

An apparently simpel build, but the intergration (and choice) of the Fenestron tail rotor caused some headaches and PSR sessions. But I am happy with the result: fist of all, I finally found a use for the surplus kit (reducing the stash height, marginally...), and the resulting helicopter does not look bad or unrealistic at all.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The MBR-04 series were the first combat-ready Destroids and the most successful land-combat weapon Destroids that were built with OverTechnology of Macross. The abbreviation MBR (Main Battle Robot) indicates the model was developed as a walking humanoid weapon emphasizing the heavy armor firepower of an artillery combat vehicle, designed to replace mainline battle tanks.

The Tomahawk operated as a core ground combat unit during the Great Stellar War (Space War I) and - when paired with the VF-1 variable fighter - achieved impressive military gains against the Zentraedi army.

General characteristics:

Equipment Type: main battle robot, series 04

Government: U.N. Spacy

Manufacturer: Viggers/Chrauler

Introduction: February 2007

Accommodation: 1 pilot plus space for a second crew member

Dimensions:

Height 12.7 meters (overall)

11.27 meters (up to head unit)

Length 5.1 meters

Width 7.9 meters

Mass: 31.3 metric tons

Power Plant:

Kranss-Maffai MT808 thermonuclear reactor, developing 2800 bhp output;

Auxiliary GE EM9G fuel generator, rated at 450 kW

Propulsion:

2x thrust nozzles mounted in the lower back region, allowing the capability to perform jumps,

plus several vernier nozzles around the hull for Zero-G manoeuvers

Performance:

Maximum speed: 180 km/h

Design features:

- Detachable weapons bay (attaches to the main body via two main locks);

- Extending/retractable periscope telescope (in weapon bay directly above the cockpit);

- Option pack featuring missiles or searchlight (can be mounted on either side of the weapon bay);

- Coolant tank (installed within the upper left side of the back torso);

- Capable of performing jumps via 2 x thrust nozzles (mounted in the lower back torso);

- Radiators with exhaust ports in the rear on the left and right hips

- Cockpit can be separated from the body in an emergency (only the cockpit block is recovered);

- Head unit equipped with 2 camera eyes, upper eye moving along a slit,

the lower protected by a polarized light shield

Armament:

1x Mauler PBG-07 liquid-cooled electrically-charged twin particle beam gun

2x Bifors close-in self-guided rocket launchers in the shoulders

with 12 rockets per launcher (24 rockets total)

2x Astra TZ-III gun clusters in the lower chest with each cluster featuring:

- 1x laser gun

- 1x 25 mm heavy machine gun

- 1x 180 mm grenade launcher

- 1 x flamethrower

2x Ramington M-89 12.7 mm air-cooled machine guns, mounted within the head unit

Option packs:

1x Erlikon anti-aircraft self-guided missile launcher with 6 missiles (shoulder mount)

1x Rheinstahl 35 mm automatic rapid-fire cannon (lower arm pod)

1x Stonewell 20 mm six-barrel gatling gun (lower arm pod)

The kit and its assembly:

After a long time, a Macross mecha kit again. The idea behind this modified Tomahawk was that I always wondered about the clumsy "cannon arms" of the Mk. VI variant, and what an earlier version - with complete arms and hands - could have looked like? When I delved through my Macross donor parts bank I came across two lower arms from former VF-1 conversions (from different kits, though...), and I tested them on my authentic 1:100 Tomahawk Mk. VI model that I have built about 20 years ago: they seemed to work in size and volume!

An extensive spare parts and sprues safari followed and yielded two complete hands/fists from a VF-1 Gerwalk Arii kit (these appear to be totally outsized!), as well as lower arms/elbow sections, so that a transplantation to the Tomahawk’s arm stumps, which would later even allow a lengthwise axis mobility. And with some extra vinyl caps the transformation experiment could begin.

The basis is a Bandai re-issues of Imai’s 1982 1:100 Tomahawk kit, in specific from Macross' 30th anniversary merchandise. They seem to pop up every five years!?

However, having built and re-built several of the Imai/Arii Destroid kits, I made some changes beyond the arm transplantation, since there’s a lot of space for improvement, even though the kit as such is decent for its age. But you have to expect PSR almost everywhere, and the kit’s vintage “Matryoshka” construction of the model (build one element from two halves, place it between two more halves, etc.) does not make the assembly process easy – but there are ways to evade this inherent problem, see below.

One important improvement measure was a completely now hip joint arrangement. OOB, the Tomahawk's posture is pretty stiff, with the legs and feet straight forward - it's supposed to just stand upright, and with the model’s OOB joint options it is really hard to create a vivid poise. Furthermore, the bolts that hold the legs are prone to break off, even more so because the Tomahawk kit is from the 1st generation of mecha kits, without vinyl caps and just very tight joint fit.

My solution was the implantation of a new hip “bone” made from plastic-coated steel, which is stiff in itself but can be bent in two dimensions. The thighs had to be modified accordingly, since the wire is much thinner than the original bolts. As a convenient trick, the receptor holes in the thighs were simply filled with small vinyl rings - their outer AND inner diameter fit perfectly for the new arrangement. With this trick, a much more dynamic and "natural" leg position could be achieved, also thanks to the Tomahawk’s large feet and their joints. This tuning measure improves the model considerably.

Another change is the Tomahawk's weaponry, which is OOB pretty impressive. Since my fictional Mk. III lost its main arm weapons, I decided to give it at least a major cannon on the shoulder. A convenient donor came from a Dorvack 1:24 PA-36K "Berlon" kit, placed on a scratched mount on the right shoulder,. Which allows the weapon to be moved up and down. To make place for the new twin gun, the OOB sextuple missile launcher was moved to the left side, necessitating a modification of its holder, too.

As mentioned above, the arms use donor parts from the Arii VF-1 Gerwalk kit, but there are also less obvious changes. While the shoulder mounts and the upper arms were taken OOB from the Tomahawk kit, I modified their attachment system. Instead of the "put the arms between the fuselage halves" solution, I modified the arms so that they can be stuck independently into their respective hull openings. This has the benefit that they are actually movable (remember the tight fit of the model’s joints, add some paint and nothing will ever move), and they can be built and painted separately from the rest of the model. In order to stabilize the arms when in place and prevent them from falling out too easily, I added an interlaced styrene tube axis arrangement between them. Very simple and effective, and it works well.

The VF-1 Gerwalk lower arms were taken OOB. Upon test-fitting I found that the bulky Tomahawk could even take some more muscle on its new arms, so I added a pair of FAST packs from a Super Valkyrie kit to them (also found in the spares box…). These would, however, not contain AAMs, as on the VF-1, but rather more guns. I went for a medium machine cannon in the left arm and a gatling gun (scratched from syringe needles, fiddly affair...) against soft and aerial targets in the right arm.

In order to provide the model with some more details and depth I added a lot of small styrene bits everywhere – this is actually only necessary on the front sides of the lower legs for an authentic improvement, but all those other tiny bits and pieces just underline the mecha’s sturdiness and provide visual detail for the later painting process.

The machine guns above the cockpit were replaced with hollow steel needles; since these are thinner than the OOB barrels, I filled the gaps with paper tissues drenched in thinned white glue. Flexible cables (elastic braid) were added to the twin beam cannon and to the legs/hip joints.

Painting and markings:

Basically a simple affair, because I wanted to stay true to the original look of a typical Macross Destroid. These tend to carry a uniform livery, esp. the Tomahawk/Defender/Phalanx family is kept in murky/dull tones of green, brown and ochre: unpretentious "mud movers". Anything else or even complex camouflage patterns are rare. The OOB MBR-04-Mk. VI carries a reddish-brown livery, and Yamato also did an 1:60 Tomahawk action figure in an overall olive drab tone, which appears canonical.

However, for a personal touch I chose a greyish dark green as basic overall tone, Field Grey (Tamiya XF-65). The missile launcher covers on the shoulders were painted in NATO olive green (RAL 6014, Gelboliv, Revell 46), but the different tone became, after weathering, harder and harder to tell, so that the Tomahawk ended up with a relatively uniform livery.

Otherwise there's hardly any other color on the Tomahawk’s hull. The hands/fists were painted with Polished Steel metallizer, the bellows in the knees became anthracite (Revell 06). The characteristic white trim on the lower legs that many Destroids carry was painted with white - unfortunately none of the Destroid kits offers them as a decal. However, due to the legs' uneven underground, these would be difficult to apply, anyway. The lower camera visor was created with simple clear red paint on top of a basic coat with silver. The other small camera windows at the top and back are small decal squares in dayglo orange.

The model was thoroughly weathered with a heavier black ink wash and a total of three dry brushing turns: the first, generous treatment with acrylic Revell 67 (Grüngrau, RAL 7009), followed by the second, moer careful turn around the edges and other details with acrylic Revell 45 (Helloliv, a yellowish variant of RLM 02). The decals followed next, mostly taken from the OOB sheet, just with a few extra stencils, new tactical codes and the "Trixie” nose art (it actually belongs to a P-40F, piloted by Joseph A Bloomer Jr of the 318th FS/325th FG in the MTO) on the lower left leg – a typical detail of many Destroids.

The third dry brushing turn followed, this time with acrylic Revell 75 (a yellowish light grey), esp. on the edges and concentrated around the lower areas of the Tomahawk, simulating wear and dust/mud residue.

Finally, the model received an overall coat with acrylic matt varnish from the rattle can. Some bare metal showing through at a few edges was added, too, again through dry-brushing with silver. After final assembly of the elements, some mineral pigments were dusted onto the model with a soft, big brush. Around the feet, pigments were also applied into small patches of wet matt acrylic varnish, forming stable mud crusts.

In the end, I am quite happy with the outcome, even though the Field Grey turned out to be darker/more murky than expected, even though the color itself suits the Tomahawk well. The transplanted arms also blend well into this mecha which bristles with weapons: this fictional (I had no reference material for earlier Tomahawk versions except the official short texts from the Macross publications) result looks pretty plausible and complements the 20-years-old Mk. VI in my collection well.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The TIE/LN starfighter, or TIE/line starfighter, simply known as the TIE Fighter or T/F, was the standard Imperial starfighter seen in massive numbers throughout most of the Galactic Civil War and onward.

The TIE Fighter was manufactured by Sienar Fleet Systems and led to several upgraded TIE models such as TIE/sa bomber, TIE/IN interceptor, TIE/D Defender, TIE/D automated starfighter, and many more.

The TIE/E played a central role in the Empire's campaign against rogue Grand Admiral Demetrius Zaarin, and mixed Defender and Escort units participated in several other battles, including the Battle of Endor. The TIE Escort continued to see limited use by the Imperial Remnant up to at least 44 ABY, and was involved in numerous conflicts, including the Yuuzhan Vong War..

The kit and its assembly:

Another group build contribution, this time to the Science Fiction GB at whatifmodelers.com during summer 2017. Originally, this one started as an attempt to build a vintage MPC TIE Interceptor kit which I had bought and half-heartedly started to build probably 20 years ago. But I did not have the right mojo (probably, The Force was not strong enough…?), so the kit ended up in a dark corner and some parts were donated to other projects.

The sun collectors were still intact, though, and in the meantime I had the idea of reviving the kit’s remains, and convert it into (what I thought was) a fictional TIE Fighter variant with three solar panels. For this plan I got myself another TIE Interceptor kit, and stashed it away, too. Mojo was still missing, though.

Well, then came the SF GB and I took it as an occasion to finally tackle the build. But when I prepared for the build I found out that my intended design (over the years) more or less actually existed in the Star Wars universe: the TIE/D Defender! I could have built it with the parts and hand and some improvisation, but the design similarity bugged me. Well, instead of a poor copy of something that was more or less clearly defined, I rather decided to create something more individual, yet plausible, from the parts at hand.

The model was to stay a TIE design, though, in order to use as much donor material from the MPC kits as possible. Doing some legwork, I settled for a heavy fighter – bigger than the TIE Interceptor and the TIE/D fighter, a two-seater.

Working out the basic concept and layout took some time and evolved gradually. The creative spark for the TIE/E eventually came through a Revell “Obi Wan’s Jedi Starfighter” snap fit kit in my pile – actually a prize from a former GB participation at phoxim.de (Thanks a lot, Wolfgang!), and rather a toy than a true model kit.

The Jedi Fighter was in so far handy as it carries some TIE Fighter design traits, like the pilot capsule and the characteristic spider web windscreen. Anyway, it’s 1:32, much bigger than the TIE Interceptor’s roundabout 1:50 scale – but knowing that I’d never build the Jedi Starfighter OOB I used it as a donor bank, and from this starting point things started to evolve gradually.

Work started with the cockpit section, taken from the Jedi Starfighter kit. The two TIE Interceptor cockpit tubs were then mounted inside, staggered, and the gaps to the walls filled with putty. A pretty messy task, and once the shapes had been carved out some triangular tiles were added to the surfaces – a detail I found depicted in SW screenshots and some TIE Fighter models.

Another issue became the crew – even though I had two MPC TIE Interceptors and, theorectically, two pilot figures, only one of them could be found and the second crewman had to be improvised. I normally do not build 1:48 scale things, but I was lucky (and happy) to find an SF driver figure, left over from a small Dougram hoovercraft kit (from Takara, as a Revell “Robotech” reboxing). This driver is a tad bigger than the 1:50 TIE pilot, but I went with it because I did not want to invest money and time in alternatives. In order to justify the size difference I decided to paint the Dougram driver as a Chiss, based on the expanded SW universe (with blue skin and hair, and glowing red eyes). Not certain if this makes sense during the Battle of Endor timeframe, but it adds some color to the project – and the cockpit would not be visible in much detail since it would be finished fully closed.

Reason behind the closed canopy is basically the poor fit of the clear part. OOB, this is intended as an action toy – but also the canopy’s considerable size in 1:50 would prevent its original opening mechanism.

Additional braces on the rel. large window panels were created with self-adhesive tape and later painted over.

The rear fuselage section and the solar panel pylons were scratched. The reactor behind the cockpit section is actually a plastic adapter for water hoses, found in a local DIY market. It was slightly modified, attached to the cockpit “egg” and both parts blended with putty. The tail opening was closed with a hatch from the OOB TIE Interceptor – an incidental but perfect match in size and style.

The three pylons are also lucky finds: actually, these are SF wargaming/tabletop props and would normally be low walls or barriers, made from resin. For my build, they were more or less halved and trimmed. Tilted by 90°, they are attached to the hull with iron wire stabilizers, and later blended to the hull with putty, too.

Once the cockpit was done, things moved more swiftly. The surface of the hull was decorated with many small bits and pieces, including thin styrene sheet and profiles, steel and iron wire in various strengths, and there are even 1:72 tank tracks hidden somewhere, as well as protective caps from syringes (main guns and under the rear fuselage). It’s amazing how much stuff you can add to such a model – but IMHO it’s vital in order to create some structure and to emulate the (early) Star Wars look.

Painting and markings:

The less spectacular part of the project, even though still a lot of work because of the sheer size of the model’s surface. Since the whole thing is fictional, I tried to stay true to the Imperial designs from Episode IV-VI and gave the TIE/E a simple, all-light grey livery. All basic painting was done with rattle cans.

Work started with a basic coat of grey primer. On top of that, an initial coat of RAL 7036 Platingrau was added, esp. to the lower surfaces and recesses, for a rough shading effect. Then, the actual overall tone, RAL 7047, called “Telegrau 4”, one of Deutsche Telekom’s corporate tones, was added - mostly sprayed from abone and the sides onto the model. Fuselage and panels were painted separately, overall assembly was one of the final steps.

The solar panels were to stand out from the grey rest of the model, and I painted them with Revell Acrylic “Iron Metallic” (91) first, and later applied a rather rich wash with black ink , making sure the color settled well into the many small cells. The effect is pretty good, and the contrast was slightly enhanced through a dry-brushing treatment.

Only a few legible stencils were added all around the hull (most from the scrap box or from mecha sheets), the Galactic Empire Seal were inkjet-printed at home, as well as some tactical markings on the flanks, puzzled together from single digits in "Aurebash", one of the Imperial SW languages/fonts.

For some variety and color highlights, dozens of small, round and colorful markings were die-punched from silver, yellow, orange, red and blue decal sheet and were placed all over the hull - together with the large panels they blur into the the overall appearance, though. The hatches received thin red linings, also made from generic decals strips.

The cockpit interior was a bit challenging, though. Good TIE Fighter cockpit interior pictures are hard to find, but they suggest a dark grey tone. More confusingly, the MPC instructions call for a “Dark Green” cockpit? Well, I did not like the all-grey option, since the spaceship is already monochrome grey on the outside.

As a compromise I eventually used Tamiya XF-65 "Field Grey". The interior recieved a black ink in and dry-brushing treatment, and some instruments ansd screens were created with black decal material and glossy black paint; some neon paint was used for sci-fi-esque conmtraol lamps everywhere - I did not pay too much intention on the interior, since the cockpit would stay closed, and the thick clear material blurs everything inside.

Following this rationale, the crew was also painted in arather minimal fashion - both wear a dark grey uniform, only the Chiss pilot stands aout with his light blue skin and the flourescent red eyes.

After an overall black ink wash the model received a dry brusing treatment with FS 36492 and FS 36495, for a weathered and battle-worn look. After all, the "Vehement" would not survive the Ballte of Endor, but who knows what became of TIE/E "801"'s mixed crew...?

Finally, the kit was sealed with matt acrylic varnish, and some final cosmetic corrections made.

The display is a DIY creation, too, made from a 6x6" piece of wood, it's edges covered with edgebonder, a steel wire as holder, and finally the display was paited with semi-matt black acrylic paint from the rattle can.

A complex build, and the TIE/E more or less evolved along the way, with only the overall layout in mind. Work took a month, but I think it was worth the effort. This fantasy creation looks pretty plausible and blends well into the vast canonical TIE Fighter family - and I am happy that I finally could finish this mummy project, including the surplus Jedi Starfighter kit which now also find a very good use!

An epic one, and far outside my standard comfort zone. But a wothwhile build!

Completed models of a MS-14JG Gelgoog Jäger and a First World War German Fokker Dr.I belonging to the famous WW1 German Air Service's ace, The Red Baron.

Type: Model Kits.

Name: Fokker Dr.I and MS-14JG Gelgoog Jäger.

Brand: Airfix and Kaiyodo.

Origin: First World War history and Mobile Suit Gundam 0080: War in the Pocket.

Scale: 1/72 and 1/100.

Material: Styrene plastic and Vinyl.

*Note: Completed by my BB many years ago. He has this hobby of model kit building since his childhood days. More in: Gifts of Talent.

My first complete Dutch set of G bricks, in light gray.

These bricks were made by Marbon Amsterdam in the 1970s.

To produce the harmless ABS the very toxic acrylnitril, the extremely explosive butadieen and the slightly less harmful styrene are used.

Marbon had had some chemical fires in that time that fire fighters did not really know how to put out.

The chemical use had shot up after WWII and no one had taken the time to keep up with the science on how to deal with it in case of something going wrong.

Warnings had been given, but no attention was paid and on August 10th 1971 the worst thing that could happen, did happen.

Dutch fire fighters had been called to Marbon before, small fires and leaks had been dealt with and they knew Marbon did not tell them everything that was going on there.

This time however the very explosive butadieen was leaking.

When the fire fighters arrived, all 200 personal were outside the fences and sirens were going of all over the place.

The butadieen was bubbling out of the reactor and had reached 50 cm high, above it was a layer of gas.

The fire fighters decided to spray through the foam with water to create a path for the Marbon technicians so they could fix the leak.

They know not to make sparks, just another day at work………

7 minutes later the fire station gets another call “Big explosion at Marbon, send everyone!”

Some background:

The Leyland “Type D” was one of several armoured vehicle types designed in 1940 on the orders of Lord Beaverbrook and Admiral Sir Edward Evans, as a part of the hasty measures taken by the British Government following the Dunkirk evacuation and the threat of invasion.

The “Type D” was a heavy scout car, intended to replace the Lanchester 6x4 and Rolls-Royce 4x2 armoured cars, which dated back to the WWI era and the early interwar period. While they were reliable vehicles and still in active service, their off-road capabilities, armament and armour left a lot to be desired – esp. in the face of the modern German army and its effective equipment.

However, the Type D was not popular, quickly replaced by smaller and more agile vehicles like the Humber scout car, and by 1944 outdated and retired. Leyland built a total of 220 Type Ds of both versions until early 1943, whilst an additional 86 Mk. IIs were built by the London, Midland and Scottish Railway's Derby Carriage Works.

Specifications:

Crew: Four (commander, gunner, driver, co-driver/radio operator/loader)

Weight: 8.3 tons

Length: 20 ft 5 in (6,30 m)

Width: 7 ft 5 in (2,27 m)

Height: 9 ft 2¾ in (2,81 m)

Ground clearance: 12 in (30.5 cm)

Turning radius: 39 ft (12 m)

Suspension: Wheel, rigid front and rear axles;

4x8 rear-wheel drive with selectable additional 6x8 front axle drive

Fuel capacity: 31 imp gal (141 litres)

Armour:

5–15 mm (0.2 – 0.6 in)

Performance:

Maximum road speed: 35 mph (56 km/h)

Sustained road speed: 30 mph (48 km/h)

Cross country speed: up to 20 mph (32 km/h)

Operational range: 250 mi (400 km)

Power/weight: 11,44 hp/ton

Engine:

1× Leyland 7-litre six-cylinder diesel engine, 95 hp (70 kW)

Transmission:

4-speed, with a 2-speed auxiliary box

Armament:

1× QF Two-pounder (40 mm/1.57 in) cannon with 94 rounds

1× 7.92 mm Besa machine gun mounted co-axially with 2.425 rounds

2-4× smoke dischargers, mounted on the turret

The kit and its assembly:

This fictional British WWII vehicle might look weird, but it has a real-world inspiration: the Marmon Herrington Mk. VI armoured heavy scout car. This vehicle only existed as a prototype and is AFAIK still preserved in a museum in South Africa – and upon a cursory glance it looks like an SdKfz. 232 with the shrunk turret from a “Crusader” cruiser tank with a short-barreled six pounder gun. It looks like a fake! Another reason for this build was a credible “canvas” for the application of the iconic “Caunter Scheme”, so that I placed the Type D in a suitable historic time frame.

The Type D was not supposed to be a truthful Marmon Herrington Mk. VI copy, so I started with a 1:72 “First to Fight” SdKfz. 232. This is a simple and sturdy tabletop wargaming model, but it is quite accurate, goes together well, is cheap and even comes with a metal gun barrel. It’s good value for the money, even though the plastic is a little thick and soft.

However, from this basis things changed in many ways. I initially wanted to shorten the hull, but the new wheels (see below) made this idea impossible. Nevertheless, the front glacis plate was completely re-modeled with 2C putty in the style of the Humber scout car, and the crew cabin was extended backwards with the same method. New observation slits had to be scratched with styrene profile material. The engine bay received a raised cover, simulating extra air intakes. The turret was replaced with a resin piece for an A13 “Valentine” Mk.III tank (S&S Models), which had a perfect size and even came with a suitable gun.

The suspension was taken OOB, but the wheels were replaced with two aftermarket resin sets (Silesian Models) with special Allied desert wheels/tires from 1941, they originally belong to a Chevrolet truck and are markedly bigger and wider than the SdKfz. 232 wheels. However, they had to be modified to match the rest of the suspension, and their size necessitated a thorough modification of the mudguards. They were not only mounted 1mm higher on the flanks, their sides, normally consisting of closed skirts, were fully opened to make sufficient room for the new wheels to change the vehicle’s look. They were furthermore separated into four two-wheel covers and their front and rear ends were slightly bent upwards. Sufficient space for the side doors had to be made, too. The spare wheels that came with the respective sets were mounted to the front (again Humber-style) and onto the engine bay cover, under a scratched tarpaulin (made from paper tissue drenched with white glue).

To conceal the SdKfz. 232 heritage even more I added more equipment to the vehicle’s flanks. Tool boxed were added to the engine bay’s flanks, some more tools to the fenders, scratched tarpaulin rolls above the side doors and I tried to scratch PSP plates with aluminum foil rubbed against a flight stand diorama floor made from PSP. Not perfect, but all the stuff livens the Type D up. A new exhaust (IIRC from a Panzer IV) was added to the rear and bumpers scratched from wire and mounted low unto the hull.

Painting and markings:

Finally, the British, so-called “Caunter Scheme”, a great source of misinterpretation not only in museums but also by modelers who have painted their British tanks in dubious if not garish colors. I do not claim that my interpretation of the colors is authentic, but I did some legwork and tried to improvise with my resources some tones that appear plausible (at least to me), based on descriptions and contemporary references.

The pattern itself was well defined for each vehicle type, and I adapted a M3 “Stuart” pattern for the model. All three basic colors, “Light Stone”, “Silver Grey” and “Slate”, were guesstimated. “Slate” is a relatively dark and greenish tone, and I chose Tamiya XF-65 (Field Grey). “Light Stone” is rather yellow-ish, light sand tone, and I used Humbrol 103 (Cream). Some sources suggest the use of Humbrol 74 (linen) as basis, but that is IMHO too yellow-ish and lacks red. The most obscure tone is “Silver Grey”, and its depictions range from a pale and dull light olive drab over blue-grey, greenish grey to bright light blue and even turquoise. In fact, this tone must have had a greenish-blue hue, and so I mixed Humbrol 145 (FS 35237) with maybe Humbrol 94 in a 3:1 ratio to achieve an “in between” tone, which is hard to describe - maybe as a greenish sand-grey? A funny effect of the colors in direct contrast is that the XF-65 appeared with an almost bluish hue! Overall, the choice of colors seems to work, though, and the impression is good.

Painting was, as usual, done with brushes and, due to the vehicle’s craggy shape, free-handedly. After basic painting the model received a light washing with a mix of black ink and brown, and some post-shading was done with light grey (Revell 75) and Hemp (Humbrol 168). Decals came from the scrap box, and before an overall protective coat of matt acrylic varnish was applied, the model received an additional treatment with thinned Revell 82 (supposed to be RAF Dark Earth but it is a much paler tone).

A more demanding build than one would expect at first sight. The SdKafz. 232 is unfortunately still visible, but the desert wheels, including the spare wheels, change the look considerably, and the British replacement turret works well, too. Using the tabletop model basis was not a good move, though, because everything is rather solid and somewhat blurry, esp. the many molded surface details, which suffered under the massive body work. On the other side, the Counter Scheme IMHO turned out well, esp. the colors, even though the slender hull made the adaptation of the pattern from a (much shorter) tank not easy. But most of the critical areas were hidden under extra equipment, anyway. 😉

06 - Zordar Dreadnought.

Category: Model Kit.

Name: Zordar Dreadnought.

Scale: Non.

Series: Mecha Collection.

Origin: Space Battleship Yamato.

Brand: Bandai.

Material: Styrene plastic.

Release Date: 1979.

Condition: Unassembled.

*Note: Pics not by us. It's just for reference.

This is a Model Kit collected by my BB.

More in My Collection Corner.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Sd.Kfz. 141/4 Panzerkampfwagen III, commonly known as the Panzer III, was a medium tank developed in the 1930s by Germany and was used extensively in World War II. It was intended to fight other armored fighting vehicles and serve alongside and support the similar Panzer IV which was originally designed for infantry support. However, as the Germans faced the formidable T-34, more powerful anti-tank guns were needed, and since the Panzer IV had more development potential with a larger turret ring, the latter was redesigned to mount the long-barrelled 7.5 cm KwK 40 gun and the Panzer III effectively swapped roles with the Panzer IV. Later, the Panzer V “Panther” took over the role of the standard MBT. Production of the Panzer III as battle tank ceased in 1943. Nevertheless, the Panzer III's capable chassis was used for a range of specialized vehicles.

The last Panzer IIIs fought in the Netherlands, Northern Italy (Gothic line), and in eastern Prussia. Perhaps a handful still operational were spread between desperately weakened companies in March-April 1945, like the Steiner Brigade.

Specifications:

Crew: Four (commander/gunner, loader, driver, radio-operator/hull machine gunner)

Weight: 19.2 tonnes

Length: 5.56 m (18 ft 3 in), hull only

6,04 m (19 ft 10 in) overall

Width: 2.90 m (9 ft 6 in)

Height: 2.41 m (7 ft 11 in) w/o antenna mast

Suspension: Torsion bar

Fuel capacity: 320 liter

Armor:

15 – 50 mm (0.6 – 1.97 in)

Performance:

Maximum road speed: 44 km/h (27 mph)

Off-road speed: 28 km/h (18 mph)

Operational range: 165 km (103 mi) with internal fuel

Power/weight: 15.63 PS (11.24 kW)/tonne

Engine:

Maybach HL120 TRM water-cooled 12-cylinder gasoline engine with 300 PS (296 hp, 220 kW),

combined with a Maybach OG 55 11 77 semi-automatic transmission

Armament:

1× 50 mm (1.97 in) KwK 39/1 L/60 with sixty rounds

2× 7.92 mm MG 42 machine guns (coaxial with main gun and in the front hull) with 2.400 rounds

The kit and its assembly:

This converted Panzer III was spawned by the idea that, by 1944, this 1936 design could have been re-built for a different use than a battle tank – a task for which this medium tank had become much too light, with an utter lack of development potential. A dedicated recce variant appeared plausible. This idea was further promoted by the fact that I had a surplus VK 1602 turret in the donor bank, left over from a Hasegawa SdKfz. 234/2 “Puma”.

The chassis was taken from a Revell “Panzer III Ostwind” kit and modified in two ways. Firstly, I changed the glacis plate, replacing the old-school vertical front with a sloped alternative, crafted from styrene sheet pieces. A new ball mount for the hull machine gun was added, as well as periscopes for the crew on new hatches, which became possible through the smaller turret.

The turret opening in the hull had not to be adapted to the smaller Puma turret – the latter was only a little bit smaller than the opening, so that some spacers were enough to make it fit snuggly, and a thin “distance ring” between hull and turret was added, too, so that it would not directly sit on the body. Fairings for a stereoscopic rangefinder were added to the turret flanks, scratched from styrene profile material, and I also added a typical Panzer III stowage box to the turret’s rear. It had to be customized to the smaller “Puma” turret, but I think that this visual enlargement of the turret is a good balance to the rest of the hull, and the box changes the vehicle’s silhouette, too. The commando cupola from the Revell kit (which comes, beyond the open “Ostwind” AA turret, with a full, early standard Panzer III turret) was left open, using the hatch from the VK 1602 turret, and I put a figure into the opening – this German commanding officer is actually 1:76, but that’s not obvious. The figure comes IIRC from a Matchbox “Wespe” SPG that I built more than 30 years ago. Since the figure had somehow lost a leg in the meantime, the Panzerspähwagen III became a suitable new workplace for the handicapped, after having been stripped off of an old enamel paint layer and outfitted with a multi-colored new uniform. Other small changes include the scratched antenna mast for the vehicle’s uprated radio equipment (from heated sprue material) and some re-arranged external equipment.

As another, subtle gimmick, I replaced the original main wheels, for a different and somewhat confusing look. A simplified running gear, without rubber on the main wheels, appeared quite plausible for 1944 onwards. The new road wheels came from a Zvezda IS-2 tank. I had a dozen of these left over from another conversion project, just in the right number and their diameter is virtually identical to the Panzer III’s original wheels! Just the spare wheels had to be taken over from the Revell kit. The fiddly OOB segmented plastic tracks were replaced with soft vinyl tracks from a Panzer III/IV CMK aftermarket set. Personally, I find them easier to handle and to paint – due to their anthracite black color and the material’s smoothness. Nice stuff!

Painting and markings:

As a late WWII vehicle I decided to apply a non-standard/fictional paint scheme, something different from the popular “Hinterhalt” scheme, and I settled upon a pattern similar to an E-100 tank I had built a while ago. The scheme consists of an overall coat of grey-green (RLM02, a universal and omnipresent tone) with disrupting, large spots of dark grey (RAL 7021, Schwarzgrau), which were strategically placed over corners and edges of the hull, so that the outlines break up. I adapted the concept onto my modified Panzer III, but somehow this looked goofy – probably due to the much smaller size and classic tank silhouette of the vehicle: the whole affair was way too reminiscent of the Allied late-war “Mickey Mouse” scheme in olive drab and black!

In order to provide a more outstanding look and lighten everything up a little, I added small grey-green mottles to the dark grey areas. After that, however, the still uniform grey-green areas stood out, so that I eventually applied mottles in RAL 7028 (Dunkelgelb) to these areas, too. The contrast is rather low, but I think that the overall look is in the end more balanced with them, and the mottles overall help to break up the outlines even further – and the paint scheme looks more “different” now. The wheels and the running gear sections of the hull were – as a standard order of the time – left without the mottles, because the swirling patterns would be rather obvious when the vehicle was moving.

The basic tones are Revell 45, Humbrol 67 and ModelMaster 1584, later treated with a dark, red-brown overall washing with acrylic paint, dry-painting with a greyish beige all over (Revell 89, nice weathering tone for fresh, clayish mud) and some watercolor in ochre and umbra for dust and mud residues. Tactical markings are minimal and come from the Revell Ostwind kit and a Hasegawa Panther. Finally, the kit was sealed with matt acrylic varnish and some mineral pigments were dusted onto the model’s lower areas.

An interesting result, and the fictional Panzerkampfwagen III looks IMHO disturbingly plausible, as it combines well-known elements and comes with subtle updates/modifications. And somehow the vehicle (unintentionally) reminds me a lot of the comparable M24 Chaffee. And isn’t there a certain look of a mini KV-1, due to the turret’s shape and proportions?

+++ DISCLAIMER +++

Nothing you see here is real, even though the model, the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The formation of the Indonesian Air Force came eight months after the former Dutch East Indies unilaterally declared independence from the Netherlands. The Netherlands initially did not recognize this, and a War of Independence ensued, which lasted until 1949. The Indonesian Air Force (Indonesian: Tentara Nasional Indonesia Angkatan Udara (TNI-AU), literally "Indonesian National Military-Air Force") used some machines left behind by the Japanese occupiers, but these were not of decisive importance for the war. Incidentally, the national insignia used until 1949 was only the red "sun" painted white in the lower half.

After this troublesome phase, the TNI-AD’s Cobras were kept busy, with frequent deployments during the Aceh Insurgency and the East Timor conflict. They soldiered on into the new millennium, even though some machines were lost in accidents or through small arms ground fire, and less and less machines remained airworthy due to the airframes’ age. In 2003, only six AH-1G+ were still operational, and even these machines had reached the ultimate end of their useful service life after more than 30 years of frequent duty. They were in September of the same year replaced by Mil Mi-35P attack helicopters, directly procured from Russia, of which several batches were acquired throughout the following years.

General characteristics:

Crew: 2: one pilot, one co-pilot/gunner (CPG)

Length: 53 ft (16 m) including rotors

Fuselage length: 44 ft 5 in (13.5 m)

Main rotor diameter: 44 ft 0 in (13.4 m)

Main rotor area: 1,520 sq ft (141 m²)

Blade section: NACA 0009.3 mod

Width: 10 ft 4 in (3.15 m) stub wings

Height: 13 ft 6 in (4.11 m)

Empty weight: 5,810 lb (2,635 kg)

Max takeoff weight: 9,500 lb (4,309 kg)

Powerplant:

1× Lycoming T53-L-13 turboshaft, 1,400 shp (1,000 kW)

Performance:

Maximum speed: 149 kn (171 mph, 276 km/h)

Never exceed speed: 190 kn (220 mph, 350 km/h)

Range: 310 nmi (360 mi, 570 km)

Service ceiling: 11,400 ft (3,500 m)

Rate of climb: 1,230 ft/min (6.2 m/s)

Armament:

1× 20 mm (0.707 in) three-barreled M197 20 mm cannon in a chin turret with 750 rounds

4× hardpoints under the stub wings, primarily used for 2.75 in (70 mm) rockets mounted in

M158 seven-round or M200 nineteen-round launchers; alternatively, M14 12.7 mm machine

gun or M18 7.62 mm Minigun pods could be carried or a single XM35 armament subsystem with

a XM195 20 mm gatling cannon

The kit and its assembly:

This fictional Bell AH-1 Cobra is the result of a cross-bashing of two Fujimi kits of this helicopter, namely the AH-1S and the AH-1J kit. I had both in The Stash™ and recently came across the Iranian HESA-2091 ‘Tiztak’, an indigenous refurbished AH-1J with flat armor glazing. Since both Fujimi kits could theoretically be combined to build this exotic Cobra derivative, I decided to try this stunt – and it left me with enough surplus parts to build something like an early/standard AH-1G.

However, combining the parts from both kits turned out to be more challenging than expected. The biggest problem was to adapt the AH-1J’s standard glazing to the respective opening on the AH-1S hull: the clear part is bigger/longer than the later flat, armored glazing, so that the fuselage area at the canopy’s rear end had to be cut away. Fitting the clear part into this widened opening furthermore called for delicate PSR work to fill gaps and bridge the transition between parts that were never meant to be stuck together – but it worked, somehow.

To set the fictional AH-1G+ apart a bit further I made some cosmetic changes: the main rotor was modified to resemble Kaman composite blades (recognizable through the tapered blade tips) that were introduced with the AH-1S (and actually turned out to be not very durable!), and a “Sugar Scoop” thermal diffusor was scratched from a piece of styrene tube. I furthermore added a ventral blade antenna and a fairing for an enlarged oil cooler – it’s actually a H0 scale Euro pallet! The blade cutters were scratched from styrene sheet. The rest was primarily taken from the AH-1J kit, e. g. the simple/early nose tip, the ordnance and the M97 chin turret. The pilot figures came from the Fujimi kit, too.

Painting and markings:

Indonesia as fictional operator for this helicopter model was inspired by TNI-AD markings (the standard TNI-AU pentagon with an additional black star in the middle) that were left over on a TL Modellbau sheet with generic national markings. The Seventies/Eighties offered a suitable time frame for the Cobras’ procurement, and from this starting point anything developed quite naturally.

However, I did not want to paint the AH-1 in a simple all-olive drab livery, and found in the Indonesian C-130 Hercules a nice painting option: at some point in time these transporters received a unique three-tone camouflage that consists of a reddish chocolate brown, a bluish dark green and a greyish grass green, combined with very light grey undersides.

For the AH-1, the pattern was directly adopted from the C-130s’ fuselage and the colors approximated, since I doubt that the paints conform to FS standards. I used Humbrol 133 (Satin Brown), ModelMaster 2060 (RAF WWII Dark Green) and a 2:1 mix of Humbrol 80 (Grass Green) and Revell 45 (Helloliv). The light grey underside was omitted, for a wraparound scheme.

The cockpit interior became very dark grey (Revell 06, Anthracite), the rotor blades tar black (Revell 09), and a black anti-glare panel was placed in front of the windscreen. For some variety I painted the 19 round rocket launchers in olive drab while the 7 round launchers for the inner stations became very light grey, so that they’d be better visible.

The decals were improvised. The TNI-AD roundels and the small Indonesian fin flashes came from the aforementioned TL Modellbau sheet. The tactical codes on the nose and the taglines on the flank consist of single black letters. The serial number on the tail came from an Iranian F-4D Phantom II sheet from Model Scale, it matched the intended time frame well. The only original decals are the small red tail rotor warning arrows.

After a light black ink washing, some post-panel-shading and an overall treatment with graphite to emphasize the kit’s fine, raised panel lines, the model was sealed with matt acrylic varnish and finally assembled.

Well, this “kitbashed” AH-1G with some mods is certainly not the best model of this helicopter type, but a good use of leftover parts from the “counter-bashed” project. Compatibility between the Fujimi AH-1S and AH-1J is limited, though, especially the canopy does not fit easily and calls for some delicate bodywork. However, with the garish paint scheme (which, as I found out after the kit had been finished, resembles a lot the livery of the illegal North Korean Hughes 500MD Defenders!) and the exotic TNI-AD markings, this Cobra really stands out und looks quite unusual.

+++ DISCLAIMER +++Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Nakajima J9N Kitsuka (中島 橘花, "Orange Blossom", pronounced Kikka in Kanji used traditionally by the Japanese) was Japan's first jet aircraft. In internal IJN documents it was also called Kōkoku Nigō Heiki (皇国二号兵器, "Imperial Weapon No.2"). After the Japanese military attaché in Germany witnessed trials of the Messerschmitt Me 262 in 1942, the Imperial Japanese Navy issued a request to Nakajima to develop a similar aircraft to be used as a fast attack bomber. Among the specifications for the design were the requirements that it should be able to be built largely by unskilled labor, and that the wings should be foldable. This latter feature was not intended for potential use on aircraft carriers, but rather to enable the aircraft to be hidden in caves and tunnels around Japan as the navy began to prepare for the defense of the home islands.

The J9Ns’ overall war contribution was negligible, and after the war, several airframes (including partial airframes) were captured by Allied forces. Three airframes (including a two-seat night fighter with FD-2 radar) were brought to the U.S. for study. Today, two J9N examples survive in the National Air and Space Museum: The first is a Kikka that was taken to the Patuxent River Naval Air Base, Maryland for analysis. This aircraft is very incomplete and is believed to have been patched together from a variety of semi-completed airframes. It is currently still in storage at the Paul E. Garber Preservation, Restoration and Storage Facility in Silver Hill, MD. The second Kikka is on display at the NASM Udvar-Hazy Center in the Mary Baker Engen Restoration Hangar.

General characteristics:

Crew: 2

Length: 8.13 m (26 ft 8 in) fuselage only

10.30 m (33 ft 8¾ in) with FD-2 antenna array

Wingspan: 10 m (32 ft 10 in)

Height: 2.95 m (9 ft 8 in)

Wing area: 13.2 m² (142 sq ft)

Empty weight: 2,300 kg (5,071 lb)

Gross weight: 3,500 kg (7,716 lb)

Max takeoff weight: 4,080 kg (8,995 lb)

Powerplant:

2× Ishikawajima Ne-130 or Ne-230 axial-flow turbojet engines

each with 8.83 kN/900 kg or 8.68 kN/885 kg thrust

Performance:

Maximum speed: 785 km/h (487 mph, 426 kn)

Range: 925 km (574 mi, 502 nmi) with internal fuel

Service ceiling: 12,000 m (39,000 ft)

Rate of climb: 10.5 m/s (2,064 ft/min)

Wing loading: 265 kg/m² (54 lb/sq ft)

Thrust-to-weight ratio: 0.43

Armament:

1× 30 mm (1.181 in) Type 5 cannon with 50 rounds in the nose

1× 20 mm (0.787 in) Type Ho-2 cannon with 80 rounds, mounted obliquely behind the cockpit

1× ventral hardpoint for a 500 l drop tank or a single 500 kg (1,102 lb) bomb

The kit and its assembly:

This is in fact the second Kikka I have built, and this time it’s a two-seater from AZ Models – actually the trainer boxing, but converted into a personal night fighter interpretation. The AZ Models kit is a simple affair, but that's also its problem. In the box things look quite good, detail level is on par with a classic Matchbox kit. But unlike a Matchbox kit, the AZ Models offering does not go together well. I had to fight everywhere with poor fit, lack of locator pins, ejection marks - anything a short run model kit can throw at you! Thanks to the experience with the single-seater kit some time ago, things did not become too traumatic, but it’s still not a kit for beginners. What worked surprisingly well was the IP canopy, though, which I cut into five sections for an optional open display – even though I am not certain if the kit’s designers had put some brain into their work because the canopy’s segmentation becomes more and more dubious the further you go backwards.

The only personal mods is a slightly changed armament, with one nose gun deleted and faired over with a piece of styrene sheet, while the leftover gun was mounted obliquely onto the left flank. I initially considered a position behind the canopy but rejected this because of CoG reasons. Then I planned to mount it directly behind the 2nd seat, so that the barrel would protrude through the canopy, but this appeared unrealistic because the (utterly tiny) sliding canopy for the rear crewman could not have been opened anymore? Finally, I settled for an offset position in the aircraft’s flanks, partly inspired by “Schräge Musik” arrangements on some German Fw 190 night fighters.

The antennae come from a Jadar Model PE set for Italeri’s Me 210s, turning it either into a night fighter or a naval surveillance aircraft.

Painting and markings:

This became rather lusterless; many late IJN night fighters carried a uniform dark green livery with minimalistic, toned-down markings, e. g. hinomaru without a white high-contrast edge, just the yellow ID bands on the wings’ leading edges were retained.

For this look the model received an overall basis coat of Humbrol 75 (Bronze Green), later treated with a black ink washing, dry-brushed aluminum and post-shading with lighter shades of dark green (including Humbrol 116 and Revell 67). The only colorful highlight is a red fin tip (Humbrol 19) and a thin red stripe underneath (decal). The yellow and white ID bands were created with decal material.

The cockpit interior was painted in a yellowish-green primer (trying to simulate a typical “bamboo” shade that was used in some late-war IJN cockpits), while the landing gear wells were painted in aodake iro, a clear bluish protective lacquer. The landing gear struts themselves became semi-matt black.

The markings are fictional and were puzzled together from various sources. The hinomaru came from the AZ Models’ Kikka single seater sheet (since it offers six roundels w/o white edge), the tactical code on the fin was created with red numbers from a Fujimi Aichi B7A2 Ryusei.

Finally, the kit received a coat of matt acrylic varnish and some grinded graphite around the jet exhausts and the gun nozzles.

Well, this fictional Kikka night fighter looks quite dry, but that makes it IMHO more credible. The large antler antenna array might look “a bit too much”, and a real night fighter probably had a simpler arrangement with a single Yagi-style/arrow-shaped antenna, but a description of the FD-2 radar suggested the layout I chose – and it does not look bad. The oblique cannon in the flank is another odd detail, but it is not unplausible. However, with all the equipment and esp. the draggy antennae on board, the Kikka’s mediocre performance would surely have seriously suffered, probably beyond an effective use. But this is whifworld, after all. ;-)

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Char B1 was a French heavy tank manufactured before World War II. It was conceived as a specialized offensive vehicle, armed with a 75 mm howitzer in the hull. Later a 47 mm gun in a turret was added, to allow it to function also as a Char de Bataille, a ‘battle tank’ fighting enemy armour, equipping the armoured divisions of the Infantry Arm. Starting in the early twenties, its development and production were repeatedly delayed, resulting in a vehicle that was both technologically complex and expensive, and already obsolescent when real mass-production of a derived version, the Char B1 "bis", started in the late thirties.

The regular French divisions destroyed quite a few German tanks but lacked enough organic infantry and artillery to function as an effective mobile reserve. After the defeat of France, captured Char B1 of all variants would be used by Germany, with some rebuilt as flamethrowers, Munitionspanzer, or mechanized artillery.

Specifications:

Crew: Five (driver, radio operator/machine gunner, commander, gunner, loader)

Weight: 36 tonnes (40 short tons, 35 long tons)

Length: 6.98 m (22 ft 10½ in) overall with gun forward

6.37 m (20 ft 11 in) hull only

Width: 2.46 m (8 ft 1 in)

Height: 2.84 m (9 ft 3¾ in)

Ground clearance: 40 cm (1 ft 3¾ in)

Climbing: 93 cm (3 ft ½ in)

Trench crossing: 2,4 m (7 ft 10½ in)

Suspension: Bogies with a mixture of vertical coil and leaf springs

Steering: Double differential

Fuel capacity: 400 liters

Armour:

14 to 70 mm (0.55 to 2.75 in)

Performance:

28 km/h (17 mph) on road

21 km/h (13 mph) off-road

Operational range: 200 km (124 mi) on road

Power/weight: 9.7 hp/ton

Engine:

1× Renault inline 6 cylinder 16.5 litre petrol engine with 350 hp (260 kW)

Transmission:

5 forward and 1 rear gear

Armament:

1x 75 ARL 37 high-velocity cannon with 94 rounds

2x 7.5 mm (0.295 in) Reibel machine guns with a total of 5,250 rounds

The kit and its assembly:.

This fictional Char B1 variant was based on the question what the tank could have looked like if there had been a suitable 75 mm gun available that could replace both its howitzer in the hull and the rather light anti-tank gun in the turret? No such weapon existed in France, but I tried to extrapolate the concept based on the standard Char B1 hull.

Two big changes were made: the first concerned the hull howitzer, which was deleted, and its recessed opening faired over with 1 mm styrene sheet and putty. This sound easier as it turned out to be because the suspension for the front right idler wheel had to be retained, and the complex shape of the glacis plate and the opening called for patchwork. A fairing for the co-driver was added as well as a ball mount for the new hull machine gun. New shackles were added to the lower front and, finally, new rows of bolt heads (created with white glue).

The turret was completely replaced with a cast turret from a 1943 T-34/76 (Zvezda kit). While its shape and gun mantlet are quite characteristic, I still used it mostly OOB because its size and shape turned out to be a very good match to contemporary French tank turrets. However, the gun barrel was moved and a fairing for a hydro-pneumatic recoil damper was added, as well as a French commander cupola. And an adapter had to be scratched to attach the new turret to the hull, together with small fairings for the wider turret ring.

Painting and markings:

I wanted a rather unusual paint scheme for this Char B1 derivative, and found inspiration in an operational museum tank that depicts vehicle “311/Rhin”: it carries a three-tone livery in two greens and brown, instead of the more common sand, dark green and earth brown tones or just two-tone schemes.

The colors were adapted to an irregular pattern, and the paints I used were Humbrol 120 (FS 34227, a rather pale interpretation of the tone), 10 (Gloss Dark Brown) and ModelMaster 1764 (FS 34092). As a personal twist, the colors were edged in black, enhancing the contrast.

The markings were puzzled together from various sources in an attempt to create suitable tactical codes of the early 1940 era. The “Ace of Spades” emblem on the turret is, for example, are a marking of the 1st section. The dot in front of the “K” probably indicated a command vehicle, but I am not certain.

Some post-shading was done as well as dry-brushing with light earth brown to emphasize edges and details. Then the model was sealed with matt acrylic varnish and received some dusting with grey-brown artist pigments, simulating dust around the running gear.

Well, not too much was changed, but the new, bigger turret changes the Char B1’s look considerably – it looks somewhat smaller now? Its new silhouette also reminds me of a duck? Weird, but the conversion worked out well – esp. the modified glacis plate without the howitzer’s recessed opening looks very natural.

"Hawaiian Pineapple Resort"

420mm x 420mm x 700mm

16.5" x 16.5" x 27.5"

steel/ resin clay/ resin/ plaster/ plastic/ balsa veneer sheet/ epoxy putty/ FRP/ styrene foam

Private Collection since 2011

All images copyright TOKYO GOOD IDEA Development Institute Co., Ltd. All rights reserved.

www.tokyogoodidea.com

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The BAC Jet Provost was a British jet trainer aircraft that was in use with the Royal Air Force (RAF) from 1955 to 1993. It was originally developed by Hunting Percival from the earlier piston engine-powered Percival Provost basic trainer, and later produced by the British Aircraft Corporation (BAC). In addition to the multiple RAF orders, the Jet Provost, sometimes with light armament, was exported to many air forces worldwide. The design was also further developed into a more heavily armed ground attack variant under the name BAC Strikemaster, which was not operated by the Royal Air Force but became a worldwide export success.

After their return to Great Britain the worn machines were quickly phased out and all T(R).5Bs were retired when 79(R) Squadron was disbanded in August 1992. The last Jet Provosts in RAF service were retired in 1993.

General characteristics:

Crew: 2

Length: 34 ft 0 in (10.36 m)

Wingspan: 35 ft 4 in (10.77 m) with wingtip tanks

Height: 10 ft 2 in (3.10 m)

Wing area: 213.7 sq ft (19.85 m²)

Airfoil: root: NACA 23015 mod; tip: NACA 4412 mod

Empty weight: 4,888 lb (2,217 kg)

Gross weight: 6,989 lb (3,170 kg)

Max takeoff weight: 9,200 lb (4,173 kg)

Powerplant:

1× Armstrong Siddeley Viper Mk.202 turbojet engine, 2,500 lbf (11,1 kN)

Performance:

Maximum speed: 382 kn (440 mph, 707 km/h) at 25,000 ft (7,620 m)

Range: 780 nmi (900 mi, 1,440 km) with tip tanks

Service ceiling: 36,750 ft (11,200 m)

Rate of climb: 4,000 ft/min (20 m/s)

Wing loading: 32.7 lb/sq ft (160 kg/m²)

Armament:

No internal guns;

4× underwing hardpoints, each capable of carrying 540 lb (245 kg), for a wide range of loads,

including bombs, pods and launch rails with unguided missiles, gun pods;

the inner pair of pylons were plumbed for auxiliary tanks.

The T( R).5B was outfitted with an AN/AVQ-23E Pave Spike laser designator pod and an AN/ALQ-101

ECM pod on the outer stations, plus a pair of 75 Imp gallon (341 liter) drop tanks or pods with 28

unguided SNEB missiles on the inner pylons

The kit and its assembly:

This fictional Gulf War participant was a spontaneous decision to build – actually as a group build submission, but it turned out to be ineligible. After fellow user SPINNERS posted one of his CG skins, a grey RAF low-viz Jet Provost at whatifmodellers.com, I suggested in the respective thread a machine in Desert Pink – and it was promptly realized, including equipment from the Gulf War Buccaneers and LGBs as ordnance. Inspiration enough to dig out an Airfix kit out of The Stash™ for which I had no concrete plan yet and turn the CG rendition into hardware.

The kit is a simple affair and shows its age through (light) flash and shaggy fit around the seams almost everywhere. Nothing dramatic, but you have to invest time and PSR effort. And it features the most complicated landing light arrangement I have ever come across: five(!) single parts if you include the front cover. Why the mold designer did not just provide a single clear piece with three lens-shaped dents at the back - and instead went for a bulkhead, three(!) separate and tiny clear lenses PLUS a clear cover that is supposed to fit in a rather dysmorphic nose opening is beyond me?

The kit was basically built OOB, using the Jet Provost T.5 air intakes and fuselage details but the Strikemaster wing tip tanks and wing pylons. The Pave Spike pod came from a Hasegawa 1:72 aircraft weapon set, the ECM pod from a Revell 1:72 F-16A (the vintage kit of the prototype with the extra engine) – it is shorter than a typical AN/ALQ-101, rather looks like an AN/ALQ-119, but these pods were all modular and could have different lengths/sizes. And I think that the shorter variant suits the Jet provost well, the Pave Spike pod is already quite long for the small aircraft.

Unlike SPINNERS I settled just for drop tanks on the inner wing stations to extend range and loiter time. I also doubt that the Jet Provost had enough carrying capacity and speed for LGBs, and on their target designation missions the RAF Buccaneers did AFAIK not carry much offensive ordnance, either. There’s also not much clearance under a Jet Provost on the ground – I doubt that anything with big fins could safely go under it? However, for a modernized look I replaced the Jet Provost’s OOB teardrop-shaped tanks with cigar-shaped alternatives.

Further mods were only of cosmetic nature: the seats received ejection handles made from thin wire, the characteristic chines under the nose were omitted (the kit’s parts are rather robust, and they were left away on some T.5s in real life, anyway), and I scratched small conformal chaff/flare dispensers from styrene profile and put them under the lower rear fuselage. Fairings for a radar-warning system were scratched from 1.5 mm styrene rods, too, some blade antennae were added around the hull, and sprue material was used to create the GPS antenna “bubble” behind the cockpit. The shallow camera bulge on the nose was created in a similar fashion.

Another problem: the model is seriously tail-heavy. I filled the chamber between the odd landing lights compartment and the cockpit with lead beads, but once the landing gear had been attached the model still sat on its tail. I was lucky that I had not glued the seats into place yet, so I was able to add more ballast in front of the main wheels, therewith creating a bulkhead (which is missing OOB) behind the seats, what was eventually enough to shift the model’s center of gravity forward.

Painting and markings:

Desert Pink was the driving theme for this build (to be correct, it’s FS 30279 “Desert Sand”). While real RAF aircraft from Operation Granby were painted all-over with this tone (and SPINNERS did the same with the CG rendition), I wanted a bit more variety and just painted the upper surfaces and the underside of the leading edges, the inside of the air intakes and the tip tanks in the sand tone, while the undersides were painted in RAF Barley Grey (Humbrol 167), as if an late all-grey low-viz trainer had been painted over just on the upper surfaces.

For the Desert Pink I was able to use the authentic tone, I had a virgin tin of Humbrol 250 in my enamels hoard that now found a good use. After basic painting the kit received an overall black in washing, dry-brushing with Revell 35 (Skin – it’s a perfect match for panel post-shading!) to retain the pinkish hue and, after the decals had been applied, a bit of grinded graphite to simulate wear and dirt and emphasize the raised surface details.

The cockpit interior was painted in Anthracite (Revell 06), the dashboard became medium grey with dark instruments (not painted, thanks to the raised details I simple rubbed some graphite over it, and the effect is nice!). The ejection seats became tar black with grey-green cushions. The landing gear was painted in Medium Sea Grey (Humbrol 165).

The drop tanks became Medium Sea Grey (Humbrol 165) and Barley Grey, as if they had been procured from a different aircraft, while the Pave Spike pod and the ECM pod were both in RAF Dark Green (Humbrol 163), for good contrast to the rest of the model.

Decals/markings come from Xtradecal sheets. The low-viz roundels were taken from a dedicated RAF roundel sheet because I wanted a uniform roundel size (in six positions) and slightly darker print colors. Unit markings and tactical codes came from a Jet Provost/Strikemaster sheet, also from Xtradecal; RAF 79 Squadron actually operated the Jet provost, but AFAIK only the T.4 version, but not the pressurized T.5 or even the T.5A navigator trainers. The nose art at bow side came from a USN EA-6B Prowler.

After some final details (position lights), the model was sealed with matt acrylic varnish.

A quick project, and the Operation Granby Jet Provost looks better than expected. However, I am not sold on the vintage Airfix kit. It clearly shows its age, nothing really went together smoothly, gaps and sinkholes, PSR on every seam. It also required tons of nose weight to keep it on its spindly legs. The alternative Matchbox kit is not much better, though, with even more simple surface and cockpit details, but at least the parts fit together. I might try to hunt down a Sword kit if I should want to build one again, AFAIK the only other IP option? The result looks interesting, though, quite purposeful with its low-viz markings, and the simple livery turns out to be very effective over the desert terrain where it would have been supposed to operate. Furthermore, the model fits well into the Jet Provost’s historic final years of duty with the RAF – even though in an unlikely role!

Ldgo is a line of plastic construction toys manufactured by the Lego Group, a privately held company based in Billund, Denmark. Lego consists of variously coloured interlocking plastic bricks made of acrylonitrile butadiene styrene (ABS) that accompany an array of gears, figurines called minifigures, and various other parts. Its pieces can be assembled and connected in many ways to construct objects, including vehicles, buildings, and working robots. Assembled Lego models can be taken apart, and their pieces can be reused to create new constructions.

The Lego Group began manufacturing the interlocking toy bricks in 1949. Moulding is done in Denmark, Hungary, Mexico, and China. Brick decorations and packaging are done at plants in the former three countries and in the Czech Republic. Annual production of the bricks averages approximately 36 billion, or about 1140 elements per second. One of Europe's biggest companies, Lego is the largest toy manufacturer in the world by sales. As of July 2015, 600 billion Lego parts had been produced.

Lego maintains a large fan community based around building competitions and custom creations, and a range of films, games, and eight Legoland amusement parks have been developed under the brand.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Canadair’s impressive CF-151 ‘Kodiak’ interceptor had a long development story, and the fact that Canada developed an indigenous high-end fighter after the demise of Avro Canada’s CF-105 ‘Arrow’ in the late 50ies was an amazing achievement.

The CF-151 was quickly becoming outdated and an aircraft of very limited use, despite its formidable capabilities as a heavy interceptor. But potential war scenarios had changed, and economical as well as political developments could not justify the expensive (and small) Kodiak fleet anymore. Consequently, the last CAF CF-151 flight took place on August 18th 2000, when the last indigenous Canadian fighter type was replaced by CF-18s, too.

Canadair CF-151A general characteristics

Crew: 2

Length: 21.2 m (69 ft 10 in)

Wingspan: spread (20° sweep): 17.14 m (66 ft 3 in); swept (65° sweep): 11,65 m (38 ft 3 in)

Height: 5.55 m (18 ft 2 in)

Empty weight: 47,200 lb (21,400 kg)

Loaded weight: 82,800 lb (37,600 kg)

Max. takeoff weight: 100,000 lb (45,300 kg)

Powerplant:

2× GE TF30-P-3 turbofan jet engines, rated at 12,000 lbf (53 kN) dry and 18,500 lbf (82 kN) at full afterburner

Performance:

Maximum speed: Mach 2.5 (1,650 mph, 2,655 km/h) at altitude and in clean configuration

Combat radius: 1,330 mi (1,160 nmi, 2,140 km)

Ferry range: 4,200 mi (3,700 nmi, 6,760 km)

Service ceiling: 66,000 ft (20,100 m)

Rate of climb: 25,890 ft/min (131.5 m/s)

Armament:

4× AIM-7E3 'Sparrow' medium-/long-range AAMs, semi-recessed under the fuselage

4× AIM-9M 'Sidewinder' short range AAMs on wing hardpoints

2× drop tanks under the outer fixed wings

Theoretical external ordnance of up to 15.200lb (6.900kg)

The kit and its assembly

A bold and weird project. It all started when I was pondering the idea of a whiffy, large VG fighter in the class of a F-4 or MiG-25. While reading book about OKB Tupolev, when I realized that the Tu-22M had pretty fighter-like lines, even for a bomber. Some math revealed that reducing the aircraft by 50% in any dimension would yield a proper airframe, and so I started out searching for a 1:144 kit which would be turned into a fine 1:72 interceptor!

Strangely, respective kits are rare and expensive. The Dragon kit is 1st choice, but I found a re-boxed Dragon kit from 1985 under the obscure “New Craft” label (supposed to come from Japan) in North Carolina, only for US$12.

Its fuselage and wings would be taken 1:1. Three areas needed modification/donations, though. One issue is the tail fin. The Tu-22M’s fin, with its broad root section and the tail barbette, would not look good on a 1:72 kit, so it was completely replaced with a fin from a Panavia Tornado (Italeri). On the other end of the kit, I decided to implant a new front with a tandem cockpit. At first I just wanted to cut open the fuselage’s upper side, implant some seats and cover it with a TF-104 canopy, but I discarded it as impractical. Additionally, too much of the Tu-22M’s silhouette would be left.

As a surprising solution I found that the forward fuselage from a Su-15 (I had fuselage parts from a PM single-seated version still in the scrap box from my Ha-410 project) could be easily transplanted onto the Tu-22M fuselage, just in front of the air intakes! Dimensions and shape fit VERY well, and since the PM kit is cheap and widely available I ordered a NiB Su-15UM (a two-seater) from PM as a donation kit, for just US$8, instead of fighting with the single-seater.

The rest were rather minor modifications: the cockpit interior was built from scratch, with dashboards from a Tornado IDS, two IAI Kfir ejection seats and side consoles made from styrene strips. Nothing fancy, but the PM kit is totally bleak... Externally, the fairing for the 1:144 AS-6 ‘Kingfisher’ missile was closed (with a piece of styrene, cut to size), jet nozzles from a Tornado IDS added (drilled open and simply glued onto the Tu-22M nozzles), and a spine implanted between the canopy and the fin.

The landing gear is also completely new: the front wheel comes from a F-18 (reversed, though), the tandem bogies for the main landing gear are leftover pieces from a VEB Plasticart Tu-20/95 bomber kit, placed on struts from a F-117 kit and fitted with wheels which actually belong to the dolly in a Amodel X-20M missile kit.

The missiles are leftover pieces from a wrecked Italeri Tornado F.3. The drop tanks belong to a Revell F-16 - I originally wanted to use even bigger ones, from a vintage "box-scale" F-100 from Revell, but these proved to be to bulbous: they'd contact the landing gear.

Painting and markings

While a lot of Soviet design went into this aircraft, the idea of a Canadian alternative/successor to the F-101 and CF-105 prevailed. Additionally, I also organized a complete marking set for CAF CF-101s (from Wintervalley in Canada), so that authentic markings could be applied. While it sounds a bit boring, the simple, all-grey livery of CAF interceptors suits the Kodiak’s elegant lines well. Hence, the whole aircraft was painted in glossy FS16515 (Testors 2039), with a black radome and a blue fin rudder with three black stripes (a 409 Squadron marking) – very simple.

In order to emphasize details and pint out panel lines the model received a wash with thin black ink, as well as some dry-painting with lighter shades of grey on the upper surfaces. Canadian aircraft look rather tidy, so a thorough weathering or true worn look was not intended.

Cockpit interior was painted in medium grey (Humbrol 140), the landing gear as well as the air intakes in white (Humbrol 130). The landing gear interior was painted white, too, everything was kept rather simple. Additionally, some weathering and stains were added with dry-brushed shades of grey.

As mentioned before, all markings come from an aftermarket decal sheet from Wintervalley Model Products from Canada (now Canuck Models). Great stuff - if you search for authentic and high quality markings for ‘something Canadian’, look there!

Finally, everything was sealed under a coat of Tamiya Semi Gloss acryllic varnish, just the glare shield in front of the cockpit became totally matt.

What should I say? An idea that lingered for months finally became hardware, and it is a big and impressive bird. Surely, with the real CF-105 background, this model has a melancholic touch... Who knows what might have been if the CF-105 had not been axed in the late 50ies...? Maybe the Kodiak! ^^

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the full-up VF-1 prototype (VF-X-1).

However, the fighter remained active in many second line units and continued to show its worthiness years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons;

Standard T-O mass: 18.5 metric tons;

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 pulses per minute

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rds/min

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

2x auxiliary hardpoints on the legs for light loads like a FLIR sensor, laser rangefinder/

target designator or ECM pod (typically not used for offensive ordnance)

The kit and its assembly:

This fictional VF-1 was born from spontaneous inspiration and the question if the USMC could have adopted the Valkyrie within the Macross time frame and applied its rather special grey/green/black paint scheme from the Nineties that was carried by AH-1s, CH-46s and also some OV-10s.

The model is a simple, vintage ARII VF-1 in Fighter mode, in this case a VF-1D two-seater that received the cockpit section and the head unit from a VF-1J Gerwalk model to create a single seater. While the parts are interchangeable, the Gerwalk and the Fighter kit have different molds for the cockpit sections and the canopies, too. This is mostly evident through the lack of a front landing gear well under the Gerwalk's cockpit - I had to "carve" a suitable opening into the bottom of the nose, but that was not a problem.

The kit was otherwiese built OOB, with the landing gear down and (finally, after the scenic flight pictures) with an open canopy for final display among the rest of my VF-1 fleet. However, I added some non-canonical small details like small hardpoints on the upper legs and the FLIR and targeting pods on them, scratched from styrene bits.

The ordnance was changed from twelve AMM-1 missiles under the wings to something better suited for attack missions. Finding suitable material became quite a challenge, though. I eventually settled on a pair of large laser-guided smart bombs and two pairs of small air-to-ground missile clusters. The LGBs are streamlined 1:72 2.000 lb general purpose bombs, IIRC from a Hobby Boss F-5E kit, and the launch tubes were scratched from a pair of Bazooka starters from an Academy 1:72 P-51 kit. The ventral standard GU-11 pod was retained and modified to hold a scratched wire display for in-flight pictures at its rear end.

Some blade antennae were added around the hull as a standard measure to improve the simple kit’s look. The cockpit was taken OOB, I just added a pilot figure for the scenic shots and the thick canopy was later mounted on a small lift arm in open position.

Painting and markings:

Adapting the characteristic USMC three-tone paint scheme for the VF-1 was not easy; I used the symmetric pattern from the AH-1s as starting point for the fuselage and gradually evolved it onto the wings into an asymmetric free-form pattern, making sure that the areas where low-viz roundels and some vital stencils would sit on grey for good contrast and readability. The tones became authentic: USMC Field Green (FS 34095, Humbrol 105), USN Medium Grey (FS 35237, Humbrol 145) and black (using Revell 06 Tar Black, which is a very dark grey and not pure black). For some contrast the wings' leading edges were painted with a sand brown/yellow (Humbrol 94).

The landing gear became standard white (Revell 301), the cockpit interior medium grey (Revell 47) with a black ejection seat with brown cushions, and the air intakes as well as the interior of the VG wings dark grey (Revell 77). To set the camouflaged nose radome apart I gave it a slightly different shade of green. The GU-11 pod became bare metal (Revell 91). The LGBs were painted olive drab overall while the AGMs became light grey.

Roundels as well as the UNSMC and unit tags were printed at home in black on clear decal sheet. The unit markings came from an Academy OV-10. The modex came from an 1:72 Revell F8F sheet. Stencils becvame eitrher black or white to keep the low-viz look, just a few tiny color highlights bereak the camouflage up. Some of the characteristic vernier thrusters around the hull are also self-made decals.

Finally, after some typical details and position lights were added with clear paint over a silver base, the small VF-1 was sealed with a coat of matt acrylic varnish.

A spontaneous interim project - and the UMSC's three-tone paint scheme suits the VF-1 well, which might have been a very suitable aircraft for this service and its mission profiles. I am still a bit uncertain about the camouflage's effectiveness, though - yes, it's disruptive, but the color contrasts are so high that a hiding effect seems very poor, even though I find that the scheme works well over urban terrain? It's fictional, though, and even though there are canonical U.N.S. Marines VF-1s to be found in literature, none I came across so far carried this type of livery.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The McDonnell Douglas (now Boeing) T-45 Goshawk was a highly modified version of the BAe Hawk land-based training jet aircraft. Manufactured by McDonnell Douglas (now Boeing) and British Aerospace (now BAe Systems), the T-45 was used by the United States Navy and the United States Marine Corps (USMC) as an aircraft carrier-capable trainer.

The Goshawk's origins began in the mid-1970s, when the US Navy began looking for a single aircraft replacement for both its T-2 and TA-4 jet trainers. The US Navy started the VTXTS advanced trainer program in 1978. Several companies made submissions, e. g. North American or Northrop/Vought. Due to the size of the potential contract, European companies made submissions, too, including a navalized Alpha Jet from Dassault/Dornier and a fully carrier-capable version of the BAe Hawk Mk.60, mutually proposed by British Aerospace (BAe) and McDonnell Douglas (MDC). The latter eventually won the competition and BAe and MDC were awarded the T-45 contract in 1981.

The final delivery of the 246th T-45 airframe took place in November 2009, and both T-45 and the OA-45 "GosHog" are supposed to remain in service until 2035.

General characteristics:

Crew: 2 (pilot, observer)

Length: 39 ft 4 in (11.99 m)

Wingspan: 30 ft 10 in (9.39 m)

Height: 13 ft 5 in (4.08 m)

Wing area: 190.1 ft² (17.7 m²)

Empty weight: 10,403 lb (4,460 kg)

Max. takeoff weight: 14,081 lb (6,387 kg)

Powerplant:

1× Rolls-Royce Turbomeca F405-RR-401 (Adour) non-afterburning turbofan with 5,527 lbf (26 kN)

Performance:

Maximum speed: Mach 2 (2,204 km/h (1,190 kn; 1,370 mph) at high altitude

Combat radius: 800 km (497 mi, 432 nmi)

Ferry range: 3,200 km (1,983 mi) with drop tanks

Service ceiling: 15,240 m (50,000 ft)

Wing loading: 283 kg/m² (58 lb/ft²)

Thrust/weight: 0.97

Maximum g-load: +9 g

Armament:

No internal gun; seven external hardpoints (three on each wing and one under fuselage)

for a wide range of ordnance of up to 6,800 lb (3,085 kg), including up to six AIM-9 Sidewinder for

self-defense, pods with unguided rockets for target marking or ECM pods, but also offensive weapons

of up to 1.000 lb (454 kg) weight, including iron/cluster bombs and guided AGM-65, GBU-12 and -16.

The kit and its assembly:

This fictional T-45 variant is actually the result of a long idea evolution, and simply rooted in the idea of a dedicated OA-4M replacement for the USMC; in real life, the FFAC role has been transferred to F-18 two-seaters, though, but the T-45 appeared like a sound alternative to me.

There's only one T-45 kit available, a dubious T-45A from Italeri with poor wings and stabilizers. Wolfpack also offers a T-45, but it’s just a re-boxing of the Italeri kit with some PE parts and a price tag twice as big – but it does not mend the original kit’s issues… After reading the A-4 Skyhawk book from the French "Planes & Pilots" series, I was reminded of the USMC's special OA-4M FAC two-seaters (and the fact that it is available in kit form from Italeri and Hasegawa), and, cross-checking the real-world timeline of the T-45, I found that it could have been a suitable successor. The ide of the USMC’s OA-45 was born! :D

Building-wise the Italeri T-45 remained close to OOB, even though I transplanted several parts from an Italeri BAe Hawk Mk. 100 to create a different look. I modified the nose with the Mk. 100’s laser fairing and added some radar warning sensor bumps. This transplantation was not as easy as it might seem because the T-45’s nose is, due to the different and more massive front landing gear quite different from the Hawk’s. Took some major PSR to integrate the laser nose.

An ALR-45 “hot dog” fairing from a late A-4M (Italeri kit) was added to the fin, together with a small styrene wedge extending the fin’s leading edge. This small detail markedly changes the aircraft’s look. I furthermore added a refueling probe, scratched from coated wire and some white glue, as well as a low “camel back” fairing behind the cockpit, created from a streamlined bomb half with air outlets for an integrated heat exchanger. Blade antennae were relocated and added. A shallow bump for the Doppler radar was added under the fuselage behind the landing gear well – left over from an Airfix A-4B (from an Argentinian A-4P, to be correct, actually a dorsal fairing).

On the wings, a tailored pair of pylons and wing tip launch rails from the Italeri BAe Hawk Mk. 100 kit were added, too, as well as the donor kit’s pair of Sidewinders. The rest of the ordnance consists of drop tanks and LAU-19 pods for target marking missiles. The tanks were taken from the Hawk Mk. 100 kit, too, the rocket launchers came from an Italeri NATO aircraft weapons set. The centerline position carries an ALQ-131 ECM pod from a Hasegawa US aircraft weapons set on a pylon from the scrap box.

Painting and markings:

The low-viz idea prevailed, since I had some leftover OA-4M decals from Italeri kits in store, as well as some other suitable low-viz decals from a Revell A-4F kit. However, an all-grey livery was IMHO not enough, and when I came across a picture of a USN low-viz A-7E with an improvised desert camouflage in sand and reddish brown applied over the grey (even partly extending over its markings) from Operation Iraqi Freedom, I had that extra twist that would set the OA-45 apart. MALS-13 was chosen as operator because I had matching codes, and, as another benefit, the unit had actually been deployed overseas during the 2003 Iraq War, so that the whif’’s time frame was easily settled, adding to its credibility.

The livery was built up just like on the real aircraft: on top of a basic scheme in FS 36320 and 36375 (Humbrol 128 and 127) with a slightly darker anti-glare panel in front of the cockpit (FS 35237, I used Revell 57 as a slightly paler alternative) I applied the low-viz marking decals, which were protected with a coat of acrylic varnish. Next, additional desert camouflage was added with dry-brushed sand and millitary brown (supposedly FS 33711 and 30400 in real life, I used, after consulting pictures of aircraft from both Gulf Wars, Humbrol 103 (Cream) and 234 (Dark Flesh). They were applied with a kind of a dry-brushing technique, for a streaky and worn look, leaving out the codes and other markings. The pattern itself was inspired by an USMC OV-10 Bronco in desert camouflage from the 1st Gulf War.

On top of that a black ink washing was applied. Once things had thoroughly dried over night, I wet-sanded the additional desert camouflage away, carefully from front to back, so that the edges became blurred and the underlying grey became visible again.

The cockpit interior was painted in standard Dark Gull Grey (Humbrol 140), while the air intakes and the landing gear became white, the latter with red trim on the covers’ edges – just standard. Finally, the model was sealed with a coat of matt acrylic varnish (Italeri).

The upgraded T-45 is an interesting result. The add-ons suit the aircraft, which already looks sturdier than its land-based ancestor, well. The improvised desert paint scheme with the additional two-tone camouflage over the pale grey base really makes the aircraft an unusual sight, adding to its credibility.

Hardware-wise I am really happy how the added dorsal hump blends into the overall lines – in a profile view it extends the canopy’s curve and blends into the fin, much like the A-4F/M’s arrangement. And the modified fin yields a very different look, even though not much was changed. The T-45 looks much beefier now, and from certain angles really reminds of the OA-4M and sometimes even of a diminutive Su-25?

+++ DISCLAIMER +++Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Nakajima J9N Kitsuka (中島 橘花, "Orange Blossom", pronounced Kikka in Kanji used traditionally by the Japanese) was Japan's first jet aircraft. In internal IJN documents it was also called Kōkoku Nigō Heiki (皇国二号兵器, "Imperial Weapon No.2"). After the Japanese military attaché in Germany witnessed trials of the Messerschmitt Me 262 in 1942, the Imperial Japanese Navy issued a request to Nakajima to develop a similar aircraft to be used as a fast attack bomber. Among the specifications for the design were the requirements that it should be able to be built largely by unskilled labor, and that the wings should be foldable. This latter feature was not intended for potential use on aircraft carriers, but rather to enable the aircraft to be hidden in caves and tunnels around Japan as the navy began to prepare for the defense of the home islands.

The J9Ns’ overall war contribution was negligible, and after the war, several airframes (including partial airframes) were captured by Allied forces. Three airframes (including a two-seat night fighter with FD-2 radar) were brought to the U.S. for study. Today, two J9N examples survive in the National Air and Space Museum: The first is a Kikka that was taken to the Patuxent River Naval Air Base, Maryland for analysis. This aircraft is very incomplete and is believed to have been patched together from a variety of semi-completed airframes. It is currently still in storage at the Paul E. Garber Preservation, Restoration and Storage Facility in Silver Hill, MD. The second Kikka is on display at the NASM Udvar-Hazy Center in the Mary Baker Engen Restoration Hangar.

General characteristics:

Crew: 2

Length: 8.13 m (26 ft 8 in) fuselage only

10.30 m (33 ft 8¾ in) with FD-2 antenna array

Wingspan: 10 m (32 ft 10 in)

Height: 2.95 m (9 ft 8 in)

Wing area: 13.2 m² (142 sq ft)

Empty weight: 2,300 kg (5,071 lb)

Gross weight: 3,500 kg (7,716 lb)

Max takeoff weight: 4,080 kg (8,995 lb)

Powerplant:

2× Ishikawajima Ne-130 or Ne-230 axial-flow turbojet engines

each with 8.83 kN/900 kg or 8.68 kN/885 kg thrust

Performance:

Maximum speed: 785 km/h (487 mph, 426 kn)

Range: 925 km (574 mi, 502 nmi) with internal fuel

Service ceiling: 12,000 m (39,000 ft)

Rate of climb: 10.5 m/s (2,064 ft/min)

Wing loading: 265 kg/m² (54 lb/sq ft)

Thrust-to-weight ratio: 0.43

Armament:

1× 30 mm (1.181 in) Type 5 cannon with 50 rounds in the nose

1× 20 mm (0.787 in) Type Ho-2 cannon with 80 rounds, mounted obliquely behind the cockpit

1× ventral hardpoint for a 500 l drop tank or a single 500 kg (1,102 lb) bomb

The kit and its assembly:

This is in fact the second Kikka I have built, and this time it’s a two-seater from AZ Models – actually the trainer boxing, but converted into a personal night fighter interpretation. The AZ Models kit is a simple affair, but that's also its problem. In the box things look quite good, detail level is on par with a classic Matchbox kit. But unlike a Matchbox kit, the AZ Models offering does not go together well. I had to fight everywhere with poor fit, lack of locator pins, ejection marks - anything a short run model kit can throw at you! Thanks to the experience with the single-seater kit some time ago, things did not become too traumatic, but it’s still not a kit for beginners. What worked surprisingly well was the IP canopy, though, which I cut into five sections for an optional open display – even though I am not certain if the kit’s designers had put some brain into their work because the canopy’s segmentation becomes more and more dubious the further you go backwards.

The only personal mods is a slightly changed armament, with one nose gun deleted and faired over with a piece of styrene sheet, while the leftover gun was mounted obliquely onto the left flank. I initially considered a position behind the canopy but rejected this because of CoG reasons. Then I planned to mount it directly behind the 2nd seat, so that the barrel would protrude through the canopy, but this appeared unrealistic because the (utterly tiny) sliding canopy for the rear crewman could not have been opened anymore? Finally, I settled for an offset position in the aircraft’s flanks, partly inspired by “Schräge Musik” arrangements on some German Fw 190 night fighters.

The antennae come from a Jadar Model PE set for Italeri’s Me 210s, turning it either into a night fighter or a naval surveillance aircraft.

Painting and markings:

This became rather lusterless; many late IJN night fighters carried a uniform dark green livery with minimalistic, toned-down markings, e. g. hinomaru without a white high-contrast edge, just the yellow ID bands on the wings’ leading edges were retained.

For this look the model received an overall basis coat of Humbrol 75 (Bronze Green), later treated with a black ink washing, dry-brushed aluminum and post-shading with lighter shades of dark green (including Humbrol 116 and Revell 67). The only colorful highlight is a red fin tip (Humbrol 19) and a thin red stripe underneath (decal). The yellow and white ID bands were created with decal material.

The cockpit interior was painted in a yellowish-green primer (trying to simulate a typical “bamboo” shade that was used in some late-war IJN cockpits), while the landing gear wells were painted in aodake iro, a clear bluish protective lacquer. The landing gear struts themselves became semi-matt black.

The markings are fictional and were puzzled together from various sources. The hinomaru came from the AZ Models’ Kikka single seater sheet (since it offers six roundels w/o white edge), the tactical code on the fin was created with red numbers from a Fujimi Aichi B7A2 Ryusei.

Finally, the kit received a coat of matt acrylic varnish and some grinded graphite around the jet exhausts and the gun nozzles.

Well, this fictional Kikka night fighter looks quite dry, but that makes it IMHO more credible. The large antler antenna array might look “a bit too much”, and a real night fighter probably had a simpler arrangement with a single Yagi-style/arrow-shaped antenna, but a description of the FD-2 radar suggested the layout I chose – and it does not look bad. The oblique cannon in the flank is another odd detail, but it is not unplausible. However, with all the equipment and esp. the draggy antennae on board, the Kikka’s mediocre performance would surely have seriously suffered, probably beyond an effective use. But this is whifworld, after all. ;-)

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Lockheed XFV (sometimes erroneously referred to as the "Salmon", even though this was actually the name of one of its test pilots and not an official designation) was an American experimental tailsitter prototype aircraft built by Lockheed in the early 1950s to demonstrate the operation of a vertical takeoff and landing (VTOL) fighter for protecting convoys.

As a historic side note, the FV-2’s detachable wing tip gun pods had a longer and more successful service life: they were the basis for the Mk.4 HIPEG (High Performance External Gun) gun pods. This weapon system’s main purpose became strafing ground targets, and it received a different attachment system for underwing hardpoints and a bigger ammunition supply (750 RPG instead of just 250 on the FV-2). Approximately 1.200 Mk. 4 twin gun pods were manufactured by Hughes Tool Company, later Hughes Helicopter, in Culver City, California. While the system was tested and certified for use on the A-4, the A-6, the A-7, the F-4, and the OV-10, it only saw extended use on the A-4, the F-4, and the OV-10, esp. in Vietnam where the Mk. 4 pod was used extensively for close air support missions.

General characteristics:

Crew: 1

Length/Height: 36 ft 10.25 in (11.23 m)

Wingspan: 30 ft 10.1 in (9.4 m)

Wing area: 246 sq ft (22.85 m²)

Empty weight: 12,388 lb (5,624 kg)

Gross weight: 17,533 lb (7,960 kg)

Max. takeoff weight: 18,159 lb (8,244 kg)

Powerplant:

1× Allison T54-A-16 turboprop with 7,500 shp (5,600 kW) output equivalent,

driving a 6 blade contra-rotating propeller

Performance:

Maximum speed: 585 mph (941 km/h, 509 kn

Cruise speed: 410 mph (660 km/h, 360 kn)

Range: 500 mi (800 km, 430 nmi) with internal fuel

800 mi (1,300 km, 700 nmi) with ferry wing tip tanks

Service ceiling: 46,800 ft (14,300 m)

Rate of climb: 12,750 ft/min (75.0 m/s)

Wing loading: 73.7 lb/sq ft (360 kg/m²)

Armament:

4× 20 mm (.79 in) Mk. 11 machine cannon with a total of 1.000 rounds, or

48× 2.75 in (70 mm) rockets in wingtip pods, or

a pair of 200 US gal. (165 imp. gal./750 l) auxiliary tanks on the wing tips

The kit and its assembly:

Another submission to the “Fifties” group build at whatifmodellers-com, and a really nice what-if aircraft that perfectly fits into the time frame. I had this Pegasus kit in The Stash™ for quite a while and the plan to build an operational USN or USMC aircraft from it in the typical all-dark-blue livery from the early Fifties, and the group build was a good occasion to realize it.

The Pegasus kit was released in 1992, the only other option to build the XFV in 1:72 is a Valom kit which, as a bonus, features the aircraft’s fixed landing gear that was used during flight trials. The Pegasus offering is technically simple and robust, but it is nothing for those who are faint at heart. The warning that the kit requires an experienced builder is not to be underestimated, because the IP kit from the UK comes with white metal parts and no visual instructions, just a verbal description of the building steps. The IP parts (including the canopy, which is one piece, quite thick but also clear) and the decals look good, though.

The IP parts feature flash and uneven seam lines, sprue attachment points are quite thick. The grey IP material had on my specimen different grades of hard-/brittleness, the white metal parts (some of the propeller blades) were bent and had to be re-aligned. No IP parts would fit well (there are no locator pins or other physical aids), the cockpit tub was a mess to assemble and fit into the fuselage. PSR on any seam all around the hull. But even though this sound horrible, the kit goes together relatively easy – thanks to its simplicity.

I made some mods and upgrades, though. One of them was an internal axis construction made from styrene tubes that allow the two propeller discs to move separately (OOB, you just stack and glue the discs onto each other into a rigid nose cone), while the propeller tip with its radome remained fixed – just as in real life. However, due to the parts’ size and resistance against each other, the props could not move as freely as originally intended.

Separate parts for the air intakes as well as the wings and tail surfaces could be mounted with less problems than expected, even though - again – PSR was necessary to hide the seams.

Painting and markings:

As already mentioned, the livery would be rather conservative, because I wanted the aircraft to carry the uniform USN scheme in all-over FS 35042 with white markings, which was dropped in 1955, though. The XFV or a potential serial production derivative would just fit into this time frame, and might have carried the classic all-blue livery for a couple of years more, especially when operated by an evaluation unit. Its unit, VX-8, is totally fictional, though.

The cockpit interior was painted in Humbrol 80 (simulating bright zinc chromate primer), and to have some contrasts I added small red highlights on the fin pod tips and the gun pods' anti-flutter winglets. For some more variety the radome became earth brown with some good weathering, simulating an opaque perspex hood, and I added white (actually a very light gray) checkerboard markings on the "propeller rings", a bit inspired by the spinner markings on German WWII fighters. Subtle, but it looks good and breaks the otherwise very simple livery.

Some post-panel-shading with a lighter blue was done all over the hull, the exhaust area and the gun ports were painted with iron (Revell 91) and treated with graphite for a more metallic shine.

Silver decal stripe material was used to create the CoroGuard leading edges and the fine lines at the flaps on wings and fins - much easier than trying to solve this with paint and brush...

The decals were puzzled together from various dark blue USN aircraft, including a F8F, F9F and F4U sheet. The "XH" code was created with single 1cm hwite letters, the different font is not obvious, thanks to the letter combination.

Finally, the model was sealed with semi-gloss acrylic varnish (still shiny, but not too bright), the radome and the exhaust area were painted with matt varnsh, though.

A cool result, despite the rather dubious kit base. The Pegasus kit is seriously something for experienced builders, but the result looks convincing. The blue USN livery suits the XFV/FV-2 very well, it looks much more elegant than in the original NMF - even though it would, in real life, probably have received the new Gull Gray/White scheme (introduced in late 1955, IIRC, my FV-2 might have been one of the last aircraft to be painted blue). However, the blue scheme IMHO points out the aircraft's highly aerodynamic teardrop shape, esp. the flight pics make the aircraft almost look elegant!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

In September 1952, the United States Navy announced a requirement for a new fighter. It was to have a top speed of Mach 1.2 at 30,000 ft (9,144.0 m) with a climb rate of 25,000 ft/min (127.0 m/s), and a landing speed of no more than 100 mph (160 km/h). Korean War experience had demonstrated that 0.50 inch (12.7 mm) machine guns were no longer sufficient, and as the result the new fighter was to carry a 20 mm (0.79 in) cannon. In response, the Vought team led by John Russell Clark, created the V-383. Unusual for a fighter, the aircraft had a high-mounted wing which necessitated the use of a fuselage-mounted short and light landing gear.

From this point on, the F-8Qs lost their raison d’être, since the Argentinian air force already had, with the Mirage III and IAI Nesher/Dagger, capable and less costly land-based interceptors available. Due to lack of spares and funds, the remaining Argentinian Crusaders (after several accidents, only eight F-8Qs were still in service and only five of them actually operational) were in 1988 transferred to Villa Reynolds air base in Western Central Argentina, grounded and stored in the open, where they quickly deteriorated. Eventually, all F-8Qs were scrapped in the early Nineties. Only one specimen survived and has been preserved in its original Gull Grey/White livery as a gate guard at the Naval Aviation Command headquarters at Comandante Espora Airport, Bahía Blanca.

General characteristics:

Crew: 1

Length: 54 ft 3 in (16.54 m)

Wingspan: 35 ft 8 in (10.87 m)

Height: 15 ft 9 in (4.80 m)

Wing area: 375 sq ft (34.8 m²)

Aspect ratio: 3.4

Airfoil: root: NACA 65A006 mod;

tip: NACA 65A005 mod

Zero-lift drag coefficient: CD0.0133

Drag area: 5.0 sq ft (0.46 m²)

Empty weight: 17,541 lb (7,956 kg)

Gross weight: 29,000 lb (13,154 kg)

Max takeoff weight: 34,000 lb (15,422 kg)

Fuel capacity: 1,325 US gal (1,103.3 imp gal; 5,015.7 L)

Powerplant:

1× Pratt & Whitney J57-P-20A afterburning turbojet engine

with 10,700 lbf (48 kN) dry thrust and 18,000 lbf (80 kN) with afterburner

Performance:

Maximum speed: 1,066 kn (1,227 mph, 1,974 km/h) at 36,000 ft (10,973 m)

Maximum speed: Mach 1.86

Cruise speed: 495 kn (570 mph, 917 km/h)

Combat range: 394 nmi (453 mi, 730 km)

Ferry range: 1,507 nmi (1,734 mi, 2,791 km) with external fuel

Service ceiling: 58,000 ft (18,000 m)

Rate of climb: 19,000 ft/min (97 m/s)

Lift-to-drag: 12.8

Wing loading: 77.3 lb/sq ft (377 kg/m²)

Thrust/weight: 0.62

Armament:

4× 20 mm (0.79 in) Colt Mk 12 cannons in lower fuselage, 125 RPG

2× side fuselage mounted Y-pylons for up to four AIM-9 Sidewinders and/or Zuni rockets

2× underwing pylon stations with a capacity of 4,000 lb (2,000 kg)

The kit and its assembly:

This relatively simple build was triggered by the “In the navy” group build at whatifmodelers.com in April/May 2020, even though I started it too late for the deadline.

After having recently read a lot of stuff about the Falklands/Malvinas conflict, I wondered if Argentina could not have procured a dedicated fighter for its single carrier – and the F-8 from US surplus stocks was a perfect candidate for the potential timeframe of the Seventies, when the type was retired from USN/USMC service or, in part, modernized and/or put up for sale, like the machines for the Philippines. The only real-world problem would have been the weight: the F-8E weighed up to 15 tons, while the Super Étendard, which was reportedly already hard to launch from Veinticinco de Mayo, had a MTOW of “only” 12 tons. Not certain if the F-8’s afterburner engine and the wings’ raised angle of incidence would have been enough to launch a Crusader? Well, it’s whifworld, after all. 😉

The basis is the Hasegawa F-8E, a kit that I had originally stashed away as a donor for a different project.

The model was built mostly OOB, I just sanded the dorsal avionics hump away and gave the machine a pair of drop tanks under the wings (from an A-4) – a rather unusual sight on a Crusader, and it looks even more weird with the wings in the raised position! The Sidewinders, relatively simple pieces, too, were taken OOB, since they look very much like early AIM-9Bs.

The kit goes together well, but it is a simple affair and you see the mold’s age. You get raised (though fine) panel lines, a rather simple cockpit tub with flat dashboards (for decals), a clumsy seat and no cockpit back wall at all. Fit is basically O.K., but the windscreen refused to fit well, and the hatch turned out to be somewhat too narrow for the rear bulkhead you are supposed to glue into it. Furthermore, the fuselage halves, especially on the underside, have shallow shrink areas close to the seams, so that PSR is mandatory. I would, not call the kit my first choice for the F-8 (which would rather be the Academy kit), but you get the Hasegawa kit at reasonable prices, and I originally purchased it as a body donor bank.

Since the kit lacks a proper air intake duct, sanding the fuselage halves inside of the respective orifice is not easy - I used a soft acrylic putty and left the radome away until the job was done. Furthermore, I added a visual blocker inside of the intake, a piece of black foamed styrene under the cockpit tub - otherwise you have direct sight down the empty interior in a head-on view.

Further small additions are some blade antennae on the hull and on the fin, inspired by the Argentinian Skyhawks.

Painting and markings:

Again, I wanted a rather subtle, semi-authentic look. The most natural choice would certainly have been a Light Gull Grey/White livery like the A-4Qs, but for a twist and because I like the late French F-8Ps in their all-over dark grey livery, I settled upon something that resembles the French/Argentinian Super Étendards: a dark, bluish-grey upper surface with white undersides and the upper colors well wrapped around the wings’ leading edges.

Concerning the French grey tone there are many different opinions and recommendations – ranging from Dark Gull Grey (FS 36231, which is IMHO much too light) over Gunship Grey (FS 36118) to dark blue.

I settled for Humbrol 79 (Blue Grey) as basic tone, which is AFAIK Humbrol’s interpretation of the German RAL 7012 (Basaltgrau), a tone that is very close to the British Dark Sea Grey. The undersides, including the landing gear, were painted with acrylic semi-gloss white from a rattle can. This was done as the first step, with a masked low waterline. Then the grey was applied by brush, and also wrapped around the wings’ leading edges. In order to improve the camouflage effect from above, the pylons as well as the outer sides of the stabilizers under the tail were painted in blue grey, too.

The flags on the rudder as well as the on the stabilizers were painted with white and Humbrol 48 (Mediterranean Blue), too, just the sun emblems on the fin are decals. Since the F-8 has, unlike the A-4 or the Sue, all-mowing stabilizers, I decided to paint the whole tail surface in white and blue and not just the trailing edge. This looks quite bright, but it is IMHO a great detail that sets this whif really apart and shows some pride.

The afterburner fairing was painted with a mix of Humbrol 27002 and 27003 (Polished Aluminum and Steel Metallizer) and later treated with graphite for a burnt look.

After an overall black ink wash the upper surfaces were treated with dry-brushed post shading (Humbrol 106 and 156). The decals come primarily from an Academy Super Étendard, augmented by markings from various decals from an Airfix Falklands War kit set sheet (e.g. the sun icons for the fin flash).

The silver leading edges of the wings, stabilizers and the fin were created with decal sheet material. the same material in black was used for walkway markings.

Decals come primarily from an Acedemy Super Étendard sheet, the tactical code was modified. Only the sun icons on the fin flash had to be procured from a different source (an Airfix A-4 Skyhawk sheet). The stencils come from the Hasegawa OOB sheet.

Finally, the kit received an all-over coat of matt acrlyic varnish.

+++ DISCLAIMER +++

Nothing you see here is real, even though the model, the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

Operated by the Islamic Revolutionary Guards Corps, Iran's small Bell AH-1J fleet has seen a fair share of indigenous modernization in recent years. In 1971, Iran purchased 202 examples of an improved AH-1J, named "AH-1J International", from the United States. This improved Cobra featured an uprated P&WC T400-WV-402 engine and a stronger drivetrain, so that it would have a better performance under “hot & high” conditions. Recoil damping gear was fitted to the 20 mm M197 gun turret, and the gunner was given a stabilized sight and a stabilized seat, too. Of the AH-1Js delivered to the Shah's Imperial Iranian Army Aviation, 62 were TOW-capable.

Iranian AH-1Js participated in the Iran–Iraq War—which saw the most intensive use of helicopters in any conventional war. Iranian AH-1Js (particularly the TOW-capable ones) were "exceptionally effective" in anti-armor warfare, inflicting heavy losses on Iraqi armored and vehicle formations. In operations over the barren terrain in Khuzestan and later in southern Iraq, beside the standard tactics, Iranian pilots developed special, effective tactics, often in the same manner as the Soviets did with their Mi-24s. Due to the post-Revolution weapons sanctions, Iranians had to make do with what was at hand: lacking other guided ordnance they equipped the AH-1Js with AGM-65 Maverick missiles and used them with some success in several operations. About half of the AH-1Js were lost during the conflict to combat, accidents, and simple wear and tear –the rest of the fleet was kept operational and busy during the following years.

The most notable use of the AH-1Js in combat by the IRGC took place in spring and summer 2008 when two AH-1Js stationed in Zahedan were extensively used in close-air-support missions during a counter-terrorism operation by IRGC Ground Forces against the Jondollah group (later to be rebranded as Jaish ul-Adl after being listed as a terrorist organization by the US State Department). After the arrest and execution of its leader, Abdolmalek Reigi by Iran, the group stopped its activities in 2009. It resumed again a few years later resulting in the launch of new anti-terror operations involving the AH-1Js in 2013, which continued periodically until 2020.

General characteristics:

Crew: 2

Length: 53 ft 5 in (16.28 m) with both rotors turning

45 ft 9 in (14 m) for fuselage only

Width: 10 ft 9 in (3.28 m) for stub wings only

Height: 13 ft 5 in (4.09 m)

Main rotor diameter: 43 ft 11 in (13.39 m)

Main rotor area: 1,514.97 sq ft (140.745 m²)

Empty weight: 2,802 kg (6,177 lb)

Max takeoff weight: 4,530 kg (9,987 lb)

Powerplant:

2× P&W Canada T400-CP-400 (PT6T-3 Twin-Pac) turboshaft engines, coupled to produce 1,530 shp

(1,140 kW; de-rated from 1,800 shp (1,342 kW) for drivetrain limitations)

Performance:

Maximum speed: 236 km/h (147 mph, 127 kn)

Range: 600 km (370 mi, 320 nmi)

Service ceiling: 10,500 ft (3,200 m)

Rate of climb: 1,090 ft/min (5.5 m/s)

Armament:

1× 20 mm (0.787 in) M197 3-barreled Gatling cannon in M97 chin turret with 750 rounds

4× hardpoints under the sub wings for 2.75” (70 mm) Mk 40 or Hydra 70 rockets in 7 or 19 rounds

pods; up to 16 5” (127 mm) Zuni rockets in 4-round LAU-10D/A launchers, up to eight Toophan

ATGM in a dual or quad launcher on each wing, AIM-9 Sidewinder or Misagh-2 anti-aircraft

missiles (1 mounted on each hardpoint)

The kit and its assembly:

This is the counterpart to another modified Fujimi AH-1 model, actually a kit bashing of the AH-1S and the AH-1J model to produce something that comes close to the real IAMI HESA-2091 helicopter, an upgraded/re-built AH-1J International of the Iranian Army Air Force. The “leftover” parts were used to create an (Indonesian) AH-1G – even though the HESA-2091 was the “core project”.

To create this Iranian variant, the AH-1J was taken as the basis and the nose as well as the flat-window canopy from the AH-1S were transplanted. While the nose with the TOW sensor turret was just an optional part that fits naturally on the fuselage (even though not without some PSR), the clear parts was more challenging, because the flat canopy is shorter than the original. In this case I had to fill some triangular gaps between the hood and the engine section, and this was done with 1.5 mm styrene sheet wedges and some more PSR to blend the parts that were not meant to be combined into each other.

The cockpit was taken OOB, together with the pilot figures that come with the kit. I also retained the original all-metal main rotor because the Iranian Cobras AFAIK were never upgraded with composite material blades?

To set the HESA-2091 further apart from the original AH-1J I changed the sensor turret in the nose and scratched a ball-shaped fairing that resembles the indigenous RU-290 thermal camera – it’s actually the ball joint from a classic clear Matchbox kit display, with a base scratched from 0.5mm styrene sheet. The “ball” turned out to be a bit too large, but the overall look is O.K., since I wanted a non-TOW AH-1J. For a “different-than-a-stock-AH-1J” look A small radome for a missile guidance antenna was added to the nose above the sensor turret, too. Another personal addition are the small end plates on the stabilizers – inspired by similar installations on Bell’s early twin-engine AH-1s, even though these later disappeared and were technically replaced by a ventral fin extension and a longer fuselage; the Iranian AH-1Js retained the short, original fuselage of the single-engine Cobra variants, though. The end plates were cut from leftover rotor blades from the scrap box, IIRC they belong to a Matchbox Dauphin 2.

Being part of the historical Zahedan fire support team I gave the Cobra an armament consisting of a nineteen round 70mm Hydra unguided missile pods (OOB), a pair of AGM-65 Maverick missiles (an ordnance actually deployed by Iranian Cobras), together with their respective launch rails, and I added launch tubes for indigenous Misagh-2 anti-aircraft missiles (which are actually MANPADS) to the stub wings’ tips as a self-defense measure. These were scratched from 2mm styrene rods.

Painting and markings:

Finding a suitable paint scheme was not easy. A conservative choice would have been an early mid-stone/earth scheme or a tri-color scheme consisting of sand, earth and dark green. However, while doing WWW research I came across some more exotic and contemporary specimen, carrying a kind of leopard-esque mottle scheme or even a “high resolution” fractal/digital cammo consisting of three shades of beige/brown/grey – even though I am not certain if the latter was a “real” camouflage for operational helicopters or just a “show and shine” propaganda livery?

Re-creating the latter from scratch would have been prohibitively complex, because the pixelized mottles were really fine, maybe just 2” wide each in real life. But I used this scheme as an inspiration for a simplified variant, also kept in three shades of brown, even though the result was a kind of compromise due to the limited material options to create it.

The base became an overall coat with Tamiya XF-57 (Buff), plus very light grey (RAL 7035; Humbrol 196) undersides. A light black ink washing was applied, and panels were post-shaded to create a more vivid surface.

Then came the pixelized mottles in two contrast colors: first came a layer in RAL 1015 (Hellelfenbein/Light Ivory) and then a second in RAL 8011 (Nussbraun/Nut Brown) in a 1:1 ratio, slightly overlapping and letting the Buff base shine through. These mottles were not painted but rather created with square bits from generic decal stripe material in various widths from TL Modellbau. While not as sophisticated as the original camouflage, effect and look are quite similar, and add to the unique look of this HESA-2091(-ish) model. And even though I was sceptical, esp. because of the reddish Nussbraun, the blurring effect of the scheme is surprisingly good – esp. when you put the model in front of a dry mountain background! I’ll keep the concept in the back of my head for further what-if models. All those single pixels were a lot of work, but the result looks really good.

Another detail from many real late Iranian Cobras was taken over, too: a black tail rotor drive shaft cover that extends up onto the fin’s leading edge – probably a measure to hide exhaust soot stains on the tail boom? A black anti-glare panel was added in front of the windscreen, too, and the rotor blades became medium grey (Humbrol 165, Medium Sea Grey) except for the main rotor blades’ undersides, which became black. The cockpit interior was uniformly painted in a very dark grey (Revell 06, Anthracite) and the pilots received khaki jumpsuits and modern grey and olive drab “bone domes”.

The decals were puzzled together from various sources. The Iranian roundels came from a Begemot MiG-29 sheet, registration numbers and fin flashes from an Iranian F-5. The IAAF abbreviation was created with single black 4 mm letters.

Graphite was used to weather the model, esp. the area on top of the tail boom, and the model was finally sealed with matt acrylic varnish overall.

An exotic model – the Iranian home-brew HESA-2091 looks familiar, but it’s a unique combination of classic Cobra elements. More spectacular is the pixelated paint scheme, and the attempt to generate it with the help of square decal bits worked (and looks) better than expected! This might also work well in grey as a winter camouflage? Hmmm….

10 - U.N.C.F.D-1 Dreadnought Class Set 1.

Category: Model Kit.

Name: U.N.C.F.D-1 Dreadnought Class Set 1.

Scale: Non.

Series: Mecha Collection.

Origin: Space Battleship Yamato 2202.

Brand: Bandai.

Material: Styrene plastic.

Release Date: Feb 2019.

Condition: Unassembled.

*Note: This is a Model Kit collected by my BB.

More in My Collection Corner.

Canajoharie NY, May 2017.

Like my old AMT styrene kit, a few pieces have fallen off.

Photo by Jack

Posted by Todd

HTT!

Wing Kit Collection Versus 14 - Ki-45 Kai Type II Toryu and P61 Black Widow.

Category: Trading Figure.

Name: Kawasaki Ki-45 Kai Hei (Model C) Type II, Toryu, 屠龍 Dragon Slayer - Allied code name "Nick”, a two-seat fighter of the 53rd Hiko Sentai in WW2.

Series: Wing Kit Collection.

Variety: 9 types and 1 secret.

Scale: 1/144 scale.

Origin: Military / Second World War.

Brand: F-Toys.

Material: Styrene Plastic.

Release Date: 1st April 2021.

Condition: Unassembled/Mint in Box.

Remark: This Wing Kit Collection lineup spotlights the former Japanese Army's Kawasaki Ki-45 Kai Type II, Toryu, 屠龍 Dragon Slayer - Allied code name "Nick” and the P61 Black Widow, the first night fighter used by the U.S. Army. Both types operated in Second World War.

Note: What my BB collected is a Kawasaki Ki-45 Kai Hei (Model C) Type II, Toryu 屠龍 Dragon Slayer - Allied code name "Nick”, a two-seat fighter of the Japanese Army 53rd Hiko Sentai in World War 2.

*Note: Pics not by us. It's just for reference.

The is a Trading Figure collected by my BB.

More in My Collection Corner.

17 - Dark Nebula Pleiades

Category: Model Kit.

Name: Dark Nebula Pleiades.

Scale: Non.

Series: Mecha Collection.

Origin: Space Battleship Yamato.

Brand: Bandai.

Material: Styrene plastic.

Release Date: 1979.

Condition: Unassembled.

*Note: Pics not by us. It's just for reference.

This is a Model Kit collected by my BB.

More in My Collection Corner.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Supermarine Seafire was a naval version of the Supermarine Spitfire adapted for operation from aircraft carriers. It was analogous in concept to the Hawker Sea Hurricane, a navalized version of the Spitfire's stablemate, the Hawker Hurricane. The name Seafire was derived from the abbreviation of the longer name Sea Spitfire.

After returning to European waters, the Aéronavale’s Seafire frontline units were re-equipped with the more modern and capable Seafire 15s and FR 23s, but these were also quickly replaced by Grumman F6F Hellcats from American surplus stock, starting already in 1950. The fighters were retired from carrier operations and soon relegated to training and liaison duties, and eventually scrapped. However, the FR.23s were at this time the only carrier-capable photo reconnaissance aircraft in the Aéronavale’s ranks, so that these machines remained active with Flottille 1.F until 1955, but their career was rather short, too, and immediately ended when the first naval jets became available and raised the performance bar.

General characteristics:

Crew: 1

Length: 31 ft 10 in (9.70 m)

Wingspan: 36 ft 10 in (11.23 m)

Height: 12 ft 9 in (3.89 m) tail down with propeller blade vertical

Wing area: 242.1 ft² (22.5 m²)

Empty weight: 5,564 lb (2,524 kg)

Gross weight: 7,415 lb (3,363 kg)

Powerplant:

1× Rolls-Royce Merlin 66M V-12 liquid-cooled piston engine,

delivering 1,720 hp (1,283 kW) at 11,000 ft and driving a 4-bladed constant-speed propeller

Performance:

Maximum speed: 404 mph (650 km/h) at 21,000 ft (6,400 m)

Cruise speed: 272 mph (438 km/h, 236 kn)

Range: 493 mi (793 km) on internal fuel at cruising speed

965 mi (1,553 km) with 90 gal drop tank

Service ceiling: 42,500 ft (12,954 m)

Rate of climb: 4,745 ft/min (24.1 m/s) at 10,000 ft (3,048 m)

Time to altitude: 20,000 ft (6,096 m) in 8 minutes 6 seconds

Armament:

4× 20 mm Hispano V cannon; 175 rpg inboard, 150 rpg outboard

Hardpoints for up to 2× 250 lb (110 kg) bombs (outer wings), plus 1× 500 lb (230 kg) bomb

(ventral hardpoint) or drop tanks, or up to 8× "60 lb" RP-3 rockets on zero-length launchers

The kit and its assembly:

This build was another attempt to reduce The Stash. The basis was a Special Hobby FR Mk. 47, which I had originally bought as a donor kit: the engine housing bulges of its Griffon engine were transplanted onto a racing P-51D Mustang. Most of the kit was still there, and from this basis I decided to create a fictional post-WWII Seafire/Spitfire variant.

With the Griffon fairings gone a Merlin engine was settled, and the rest developed spontaneously. The propeller was improvised, with a P-51D spinner (Academy kit) and blades from the OOB 5-blade propeller, which are slightly deeper than the blades from the Spitfire Mk. IX/XVI prop. In order to attach it to the hull and keep it movable, I implanted my standard metal axis/styrene tube arrangement.

With the smaller Merlin engine, I used the original, smaller Spitfire stabilizers but had to use the big, late rudder, due to the taller fin of the post-ware Spit-/Seafire models. The four-spoke wheels also belong to an earlier Seafire variant. Since it was an option in the kit, I went for a fuselage with camera openings (the kit comes with two alternative fuselages as well as a vast range of optional parts for probably ANY late Spit- and Seafire variant – and also for many fictional hybrids!), resulting in a low spine and a bubble canopy, what gives the aircraft IMHO very sleek and elegant lines. In order to maintain this impression I also used the short cannon barrels from the kit. For extended range on recce missions I furthermore gave the model the exotic underwing slipper tanks instead of the optional missile launch rail stubs under the outer wing sections. Another mod is the re-installment of the small oil cooler under the left wing root from a Spitfire Mk. V instead of the symmetrical standard radiator pair – just another subtle sign that “something’s not right” here.

Painting and markings:

The decision to build this model as a French aircraft was inspired by a Caracal Decals set with an Aéronavale Seafire III from the Vietnam tour of duty in 1948, an aircraft with interesting roundels that still carried British FAA WWII colors (Dark Slate Grey/Dark Sea Grey, Sky). Later liveries of the type remain a little obscure, though, and information about them is contradictive. Some profiles show French Seafires in British colors, with uniform (Extra) Dark Sea Grey upper and Sky lower surfaces, combined with a high waterline – much like contemporary FAA aircraft like the Sea Fury. However, I am a bit in doubt concerning the Sky, because French naval aircraft of that era, esp. recce types like the Shorts Sunderland or PBY Catalina, were rather painted in white or very light grey, just with uniform dark grey upper surfaces, reminding of British Coastal Command WWII aircraft.

Since this model would be a whif, anyway, and for a pretty look, I adopted the latter design, backed by an undated profile of a contemporary Seafire Mk. XV from Flottille S.54, a training unit, probably from the Fifties - not any valid guarantee for authenticity, but it looks good, if not elegant!

Another option from that era would have been an all-blue USN style livery, which should look great on a Spitfire, too. But I wanted something more elegant and odd, underpinning the bubbletop Seafire’s clean lines.

I settled for Extra Dark Sea Grey (Humbrol 123) and Light Grey (FS. 36495, Humbrol 147) as basic tones, with a very high waterline. The spinner was painted yellow, the only colorful marking. Being a post-war aircraft of British origin, the cockpit interior was painted in black (Revell 09, anthracite). The landing gear wells became RAF Cockpit Green (Humbrol 78), while the inside of the respective covers became Sky (Humbrol 90) – reflecting the RAF/FAA’s post-war practice of applying the external camouflage paint on these surfaces on Spit-/Seafires, too. On this specific aircraft the model displays, just the exterior had been painted over by the new operator. Looks weird, but it’s a nice detail.

The roundels came from the aforementioned 1948 Seafire Mk. III, and their odd design – esp. the large ones on the wings, and only the fuselage roundels carry the Aéronavale’s anchor icon and a yellow border – creates a slightly confusing look. Unfortunately, the roundels were not 100% opaque, this became only apparent after their application, and they did not adhere well, either.

The tactical code had to be improvised with single, black letters of various sizes – they come from a Hobby Boss F4F USN pre-WWII Wildcat, but were completely re-arrenged into the French format. The fin flash on the rudder had to be painted, with red and blue paint, in an attempt to match the decals’ tones, and separated by a white decal stripe. The anchor icon on the rudder had to be printed by myself, unfortunately the decal on the bow side partly disintegrated. Stencils were taken from the Special Hobby kit’s OOB sheet.

The model received a light black ink washing, post-panel shading with dry-brushing and some soot stains around the exhausts, but not too much weathering, since it would be relatively new. Finally, everything was sealed with matt acrylic varnish.

A relatively quick and simple build, and the Special Hobby kit went together with little problems – a very nice and versatile offering. The mods are subtle, but I like the slender look of this late Spitfire model, coupled with the elegant Merlin engine – combined into the fictional Mk. 23. The elegant livery just underlines the aircraft’s sleek lines. Not spectacular, but a pretty result.

+++ DISCLAIMER +++

Nothing you see here is real, even though the model, the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The origins of the Ethiopian Air Force have been traced to (then Ras) Haile Selassie witnessing a show of the British Royal Air Force in November 1922, in Aden. Having never seen an airplane before, he was captivated by this demonstration of their power and abilities, and spontaneously asked if he could go up in one of the biplanes, proclaiming that it was "very fitting that he, as regent of Abyssinia should be the first Abyssinian to take flight in an aeroplane." As a result of this experience, he afterwards advocated the development of the Imperial Ethiopian Air Force. This small air arm began with the delivery of a Potez 25-A2 to the capital Addis Ababa on 18 August 1929. The Ethiopian Air Force was organized by Mishka Babitchef, the first Ethiopian pilot, who was of Russian descent. A Junkers W 33c followed on 5 September.

In 1964, the neighboring Somalis began receiving large quantities of weaponry, ground equipment, and MiG-17 fighters from the Soviet Union. In response, the US started delivering the supersonic F-5A jet fighters in 1965 to counter this new threat. Careful not to escalate the situation further, the USA delivered the F-5As without providing major weapon systems for the aircraft, the ability to use air-to-air missiles. This deal, however, marked the start of the eventual retirement of the IEAF’s remaining early first-line propeller aircraft, even though some Fireflies and Spitfire FR. Mk. 18s soldiered on into the Seventies and were among the last vintage WWII fighters that were still in operation worldwide.

General characteristics:

Crew: 1

Length: 32 ft 8 in (9,96 m)

Wingspan: 36 ft 10 in (11,23 m) with full span elliptical tips

Height: 10 ft (3,05 m)

Wing area: 242.1 sq ft (22,49 m²)

Airfoil: NACA 2213 (root), NACA 2209.4 (tip)

Empty weight: 6,578 lb (2.984 kg)

Gross weight: 7,923 lb (3.594 kg)

Max takeoff weight: 8,400 lb (3.810 kg)

Powerplant:

1× Rolls-Royce Griffon 65 supercharged V12 with 2,050 hp (1,530 kW) at 8,000 ft (2.438 m),

driving a 5-bladed Jablo-Rotol propeller

Performance:

Maximum speed: 441 mph (710 km/h, 383 kn) in FS supercharger gear at 29,500 ft.

391 mph in MS supercharger gear at 5,500 ft.

Combat range: 610 mi (960 km, 520 nmi)

Ferry range: 1,240 mi (2.000 km, 1,085 nmi)

Service ceiling: 43,500 ft (13.300 m)

Rate of climb: 5,040 ft/min (25,6 m/s) in MS supercharger gear at 2,100 ft.

3,550 ft/min in FS supercharger gear at 22,100 ft.

Time to altitude: 7 mins to 22,000 ft (at max weight)

Wing loading: 32.72 lb/sq ft (159,8 kg/m²)

Power/mass: 0.24

Armament:

2× 20 mm (0.787-in) Hispano Mk II cannon, 120 RPG

2× 0.50 in (12,7 mm) M2 Browning machine guns, 250 RPG

Ventral and underwing hardpoints for alternative loads of:

● 2× 250 lb G.P. Mk.IV bombs (500 lb total)

● 3× 250 lb G.P. Mk.IV bombs (750 lb total)

● 1× 500 lb G.P. Mk.IV bomb (500 lb total)

● 1× 500 lb G.P. Mk.IV bomb + 2 x 250 lb G.P. Mk.IV bombs (1,000 lb total)

● 8× RP-3 rockets

● 1x 90 gal. drop tank

The kit and its assembly:

This exotic what-if Spitfire was inspired by a F-5A decal sheet that I had recently bought, which featured – among many others – markings for an Ethiopian aircraft. That made me remember the odd Fairey Fireflies in desert camouflage and I wondered what other aircraft could have been operated by Ethiopia, too? One candidate was the Saab J29 Tunnan (because Sweden provided massive support to build and equip the Ethiopian Air Force), but then stumbled upon an MPM Spitfire Mk. 18 in the Stash™ that had been lingering there for years because I had bought it long ago as a part of a cheap lot, so that I had no concrete ideas for it so far. While I favored the J29 idea (esp. as a recce variant, possible with the Heller kit) I eventually used the opportunity to build the Spitfire, and it would, as an FR. Mk. 18, also become a late submission to the “Reconnaissance and Surveillance” group build at whatifmodellers.com in Sep. 2021.

That said, the simple but nicely detailed MPM kit from 1993 with a vacu canopy (actually two, one as a generous spare part should something go wrong…) and PE parts for cockpit and landing gear was basically built OOB. However, it is a typical short-run kit, so it bears some traps and surprises. What’s positive: very fine (even though somewhat soft) engraved surface details all over hull and wings as well as molded structures on the cockpit walls.

But this is countered by a wide range of weak or at least challenging points. For instance, the kit lacks ANY locator pins, the sprues are very thick, there’s flash and some parts like the machine guns or the propeller (with all five blades molded onto the spinner) are very rough in shape. PE parts are used everywhere: inside of the cockpit (you can build either a simple IP version of an almost fully-photo-etched alternative – I did a mix of both), the landing gear wells or the radiators, which are otherwise massive IP parts with a blurry interior and poor fit under the wings. The PE parts, however, are crisp and rather thick, so that they can be easily cut off from their blank and handled, and they fit surprisingly well, too.

Wings and fin each consist of two complete halves, so that they are quite massive, especially their trailing edges. Confusingly, the stabilizers come with pins - but there are no openings for them in the fuselage to hold or align them. The wheels are similar: there are pins on the legs, but no holes in the wheels themselves… Once the stabilizers are mounted in place you realize that they do not align with the fuselage shape: the visual axis through the rudders is “swept backwards” and needs further adjustments. The carburetor intake is molded into the lower wing section and the fuselage halves, and since it pointlessly consists of three thick-walled sections that do not align well, this calls for some serious PSR or even a total replacement (which I unfortunately did not have at hand). The wing roots on the fuselage do not match the wings well, either: they are much too wide for the assembled wing section, so that they had to be cut down (almost 1mm per side!) and the resulting inconsistencies had to be PSRed, too.

You see, the kit itself bears already a lot of challenges and work, and beyond this basic stuff I made some other amendments. Most importantly, I replaced the original and rather crude single-piece propeller with a leftover alternative from a Special Hobby Griffon-powered Spitfire, which fits well and looks MUCH better. It was mounted with the help of my standard metal-axis-in-a-styrene-tube-adapter construction. This revealed, however, that the front wall behind the spinner is not perfectly aligned with the propeller axis: there’s a noticeable gap that had to be filled with putty during the final assembly stages.

The ventral camera ports as well as the round openings on both flanks were drilled open and later received windows created with Humbrol ClearFix.

Due to the makeshift cockpit opening and the only vaguely fitting vacu canopy I decided to leave the cockpit closed, but added a (Matchbox) pilot figure with chopped-off legs to fit into the seat and vivify the model. The canopy itself was attached with superglue and later PSRed into the spine.

Painting and markings:

The more entertaining part of the build. I wanted to give this Spitfire a mix of desert camouflage, as seen on the Fireflies or the Saab B17 bombers, and, as a recce aircraft of British origin, classic PRU Blue.

The two-tone camouflage on the upper surfaces consists of RAF Dark Earth (Humbrol 29) and Light Stone (Humbrol 121), inspired by color photographs from contemporary Ethiopian aircraft – there’s a very helpful Air Enthusiast magazine article about the IEAF Fireflies (that can be accessed online under issuu.com/mtaye/docs/the_long_life_of_ethiopian_fairey_fi...). The undersides were painted with ModelMaster 2061, and the aircraft received a high waterline just under the cockpit and an all-blue fin – an interesting contrast, esp. with the colorful IEAF roundels and similar to the Royal Navy post-war scheme, just with different colors.

Even though the IEAF apparently added red spinners to the Fireflies, I kept it camouflaged on the model. No distractions.

The cockpit interior was painted with RAF Cockpit Green (Humbrol 78, according to pictures of real Mk. 18 cockpits – the typical RAF post-WWII black interior must have been introduced later?), as well as the landing gear wells. The inside of the main gear covers was painted in Medium Sea Grey (Humbrol 165), as if this ex-RAF aircraft from Iraq had only been re-painted externally. The pilot received – using references from the aforementioned IEAF Firefly article – a pale greyish-beige jumpsuit, a dark skin, and I even tried to add a black beard for more authenticity.

As usual, the model received an overall washing with black ink and some post-panel shading. Some light weathering was done with dry-brushed light grey on the wings’ leading edges – IEAF aircraft seem to have been kept in very good shape during the Fifties. Therefore, only minimal exhaust stains were added to the flanks and no gun soot to the wings.

Decals were kept simple, just the IEAF roundels and three-digit tactical codes on the fin and under the exhaust stubs, all coming from the inspiring F-5 sheet.

The finished IEAF Spitfire FR. Mk. 18 does not look spectacular – but I like the mix of a contrast desert camouflage with the deep PRU Blue and the high waterline, which IMHO also underlines the Spitfire’s elegant lines. The colorful Ethiopian roundels are an interesting contrast, too. Somehow this model almost looks like a creation for/from a Tintin comic, even though unintentionally?

The MPM kit, however, turned out to be a so-so affair. It would be unfair to call it bad, because it is a very good representation of the aircraft it depicts, and it comes with ample detail. It is a typical short-run kit, though, and therefore nothing for beginners or people who are faint at heart. There are certainly better Griffon-Spitfire kits around, but I am quite happy that I eventually found a good use for this rather comatose case from The Stash™. And I like the outcome, despite its flaws and weaknesses.