View allAll Photos Tagged segment
In THPRD's segment of the Fanno Creek Trail, there is a curve (near the area where they have the concerts in park) that had a hole that's bothered me for some time. It was formed by a park vehicle's tire going off the trail during wet weather and was several inches lower than the trail segment. I've worried about a bike cutting that corner some night and crashing because of it.
Last week, I found myself riding SB on the trail, and encountered a ped who was NB. She saw me, and stepped aside, but I slowed to allow a bike that was behind her to pass before I did. She was startled by the other cyclist's "On your left", and stepped off the trail, rolling her ankle in the hole. I called it in, and the next day showed it to Park's staff. This week, I found the hole had been filled.
CO (Mineral County)
Day 7 random campsite (Segment 21) to Spring Creek Pass
I stopped short of preferred destination last night and I think that was a good idea. It was cold (low 30s) and planned site was even higher so might have been even colder. As I began hiking I didn't recognize the location of the site. If I had continued hiking the night before I might have missed it and then had no where to camp.
The Colorado Trail Databook that I use identifies campsite locations. I don't always camp at these locations but they usually make for good destinations. Current conditions might have me change my mind and adjust accordingly. At the appropriate time in the day, I''ll start searching for a flat spot.
Today was the final day of this section hike. I had 10.8 miles to make it to Spring Creek Pass. There was an initial good climb out of West Mineral Creek Drainage. During a gradual decline from the high point at 12,785 ft, there was some steep sidehill and glimpses of chalk cliffs. Shortly thereafter Snow Mesa begins.
SWQM Stations (Active): 20427
Segment ID: 0829
Latitude: 32.745131
Longitude: -97.350477
Date Created: 20080717
EPA Type1: STREAM
EPA Type2: AMBNT
Short Desc: CLEAR FORK TRINITY RIVER 235 METERS UPSTREAM OF WEST LANCASTER AVENUE
Long Desc: CLEAR FORK TRINITY RIVER 235 METERS UPSTREAM OF WEST LANCASTER AVENUE IN FORT WORTH
Basin ID: 8
County Name: Tarrant
Eco Region: 29
Hydr Unit: 12030102
TCEQ Region: 4-DALLAS/FORT WORTH
I pretty much left one lens on each of my film camera the whole trip. The RB67 got the 50mm lens (which is the only working RB67 lens I've got at the moment) and the TX got the 135mm prime lens.
The Red Rock Canyon California State Park was something we just discovered while we drove through it. I love the shape of the hills. So rumply. So colorful.
Program:Manual
Lens:70-300mm f/4-5.6 G VR
F:4.0
Speed:1/2500
ISO:220
Focal Length:70 mm
AF Fine Tune Adj:-1
Focus Mode:AF-C
AF Area:Dynamic Area (3D-tracking)
Shooting Mode:Single-Frame, Auto ISO
VR:On
EV:+2/3
Metering Mode:Multi-segment
WB:Auto0
Picture Control:Neutral
Focus Distance:7.94 m
Dof:3.19 m (6.66 - 9.84)
HyperFocal:40.77 m
Accuracy is a hard goal to score!
the pattern is way off here but the important thing is the line up of the Black / Yellow joint between layers. I'm hoping the grain is that bland, that the layer miss-alignment won't be noticeable, .......
Across the road and to the right is Inkwells Bridge: a hop, skip & jump away. The Leo T. Cronin Fish Viewing Area, where we parked, is next door, to our left.
This is just one segment of a very large photographic piece mounted against the West windows of Brookfield Place, downtown Toronto as part of the Contact Photography Festival. It's definitely worth a look if you're downtown, but you have to get up close to really appreciate th quality of the print and what a fantastic concept. Click here for more info.
#189 in my 365inCamera project - www.flickr.com/groups/1285323@N21/pool and Project 365.
A EURO AMÉRICA PNEUS é uma empresa Importadora e Distribuidora de PNEUS, localizada em Porto Alegre - RS, que atua nos segmentos de passeio, carga, agrÃcola e OTR.
My woodturning works, segmented bowl, various type of wood, brazilian reclaimed wood, and
European wood packaging.
Based on original designs of the end customer, Galbiati has produced and supplied to a known Indian steel mill two spare segments for a continuous casting plant.
The thickness of the casting sheet is precisely calibrated by special high pressure hydraulic cylinders fed by stainless steel pipes mounted on the segments.
Most of the mechanical, hydraulic components of the segments for continuous casting have been purchased by the most qualified European manufacturers.
A complete pre-assembly of the segments for continuous casting was carried out at the assembly department of Officine Galbiati and a final test was carried out with the full satisfaction of the Indian end customer’s inspector.
A special maritime packaging has been designed and manufactured at the Galbiati workshop to allow the shipment of each segment for continuous casting completely assembled and therefore ready for quick assembly on site.
A technical and quality manager of the Galbiati staff was requested by the Indian customer for on-site supervision in order to reconfirm the maximum performance and the good operation of the segments for continuous casting.