View allAll Photos Tagged controller
Copper bar to IGBET was loose causing it to heat up it burnt the track off the board. I solder a reing crimp back to the board and polished it up with a dremel.
www.avatardeals.com/DualShock-3-Wireless-Controller-for-P...
Compatibility: PS3 and PS3 Slim
Supports Version 4.0Dual vibration
High quality cubic printing baking finish offers maximum comfort
Environmentally friendly hardened PET box Stable soft-board with protective circuit
Accurate motion-sensing technology
Wireless controller enables endless game play
Campbell box and CNC controller. I had to hack on the box for the oversized third-party power supply so don't use this as a good build example.
At some point, I realised that if I didn't photograph everything before I did it, there would be no way to put it all back together again.
Okay, so these AREN'T the fat controllers but these men did control the destiny of the West during the tense years of the Cold War. Admittedly, I didn't check to see who was who but, looking at the Hack Green website and here's the link: www.hackgreen.co.uk/News/news.htm, I can tell you who two of these men are. One is Sergei Georgievich Gorshkov, Admiral of the Fleet of the Soviet Union, Supreme Commander Naval Forces and First Deputy Head Praesidium of the Soviet Union.
The other is Pavel Stapanovic Kutakhov, Chief Marshal of Aviation, C-in-C of Soviet Air Forces, Deputy Minister of Defence and Deputy Head Praesidium of the Soviet Union. In short, two very powerful men - one of whom retired in 1987 (Admiral Gorshkov), two years before the beginning of the end of the Cold War while the other died suddenly in 1984.
Well, you've got the link so I don't need to type out what it says on the relevant page...do I?
Mockup of the space shuttle orbiter cockpit
This was once a part of the shuttle mission simulator (SMS) at Johnson Space Center in Houston, Texas. Astronauts and mission controllers would use this, along with a high fidelity flight simulator, to practice space shuttle missions. By the time the astronauts launched on their real mission, they would have flown scores of flights in this cockpit, with mission controllers monitoring the flights from another building.
Snail Run is a game + game controller designed by Li Hui Hui, Ou Yang and Hou Zhen Long during the ENIAROF workshop at the Central Academy of Fine Arts, Beijing. The workshop was organised by Antonin Fourneau, Douglas Edric Stanley and Cheng-Liang Wang with assistance from Linekernel and Robin Moretti. It was financed by France-China 50, in celebration of 50 years of diplomatic relations between the two countries; The Central Academy of Fine Arts; and The Aix-en-Provence School of Arts.
cf. Snail Run
www.abstractmachine.net/blog/snail-run/
For the alt.crtl.gdc exhibition at the 2015 Game Developers Conference, Douglas Edric Stanley and Leanne Stanley rebuilt the Snail Controller while documenting their process. This how-to will be integrated into the future Book of Eniarof.
cf. The Book of Eniarof
Perhaps you have some time on your hands. Would you be interested in
watching 45 minutes of me talking about uses for our temperature controller(fermentation, sous-vide, and meal automation). Special treat, I am wearing a rare Chewbacca t-shirt. This is the talk I gave on March 15th at the Albuquerque hack space Quelab.
www.szttfuav.com/diy-components/ag-drone-t1-flight-contro...
T1 flight quadcopter controller is a mature flight controller for agricultural UAV. Diy quadcopter flight controller provides rich and practical function that can meet the multiple requirements of the current agricultural UAV. By the integration of high precision sensor, the application of advanced industrial precision calibration algorithm as well as reasonable intelligent operation mode, the more efficient, accurate and convenient way of plant protection work can be realized.
Autonomous operation/ One key takeoff and landing
Autonomous operation according to the scheduled route, once the route is planned, it can be reused. Automatic takeoff or landing can be achieved by a switch.
Terrain following/ Height hold
The relative height between aircraft and crops can be maintained with high precision radar. The track is guided by the integrated navigation system, which can make sure that the flight is a straight line.
High positioning accuracy/ Long distance cruise
Support GPS, reliability is improved. Can automatically work even if out of the sight distance.
Low voltage alarm/ Resume work
Support voice alarm when low voltage and record current position before auto return. After replacing the battery, return to break point and resume work automatically.
Pesticides monitoring/ Uniform spraying
Support monitor the pesticide dosage; voice alarm and auto return are performed when there is no pesticide. After adding the pesticide, return to break point and resume work automatically.
Reliable algorithm/ Stable attitude
With high precision IMU and robust control algorithm, the aircraft has stable attitude and high anti-interference.
Monitoring / Broadcast function
Support cell phone ground station, which can measure the location of plots, set parameters and monitor flight status, voice announcements is integrated in it.
A Solar Charge Controller is a device that use to control the amount of current PV modules feed into a battery bank. Their main purpose is to stop over - charging the batteries, but Charge Controllers also block the reverse current from a battery bank from leaking backwards into the photovoltaic array.
It is not always you require a Charge Controller if your panel sizing is less than 2 W with a minimum maintenance. The Solar Charge Controllers maximum power point tracking feature permits Solar Panel Charge Controller to draw maximum power from a panel in your current conditions.
visit: www.ecosmart-solar.com
e-mail:dubai@ecosmart-intl.com
Phone: +971 4 2669986
India
Phone: +91-80-3296 1333
e-mail :blr@ecosmart-intl.com
MJ Industry produces feeder controllers that can control any feeder drive unit and most other manufacturers’ versions. The vibrator controller regulators are available in two voltages: 120 volts and 240 volts. They are intended for basic vibratory feeder operation while also being capable of a sophisticated operation.
LINK:https://vibratorybowlfeeder.com/vibrator-controllers-regulators/
This morning I finally received the components I ordered to build up my new KAP controller circuit. As I've mentioned before, this is the same circuit I've been using for a couple years but the new board makes it more durable and easier to duplicate.
P.S. The board on the bottom is the one I designed. The top ones are modules I bought.
Purchased the dual controller holder for the Atari 5200 off of ebay. Now I can do the dual stick thing with Robotron.
It came broken down the middle. Previous owner attempted to fix with masking tape. I used gorilla glue, then wood screwed it down to a chunk of wood. Works like a charm.
Snail Run is a game + game controller designed by Li Hui Hui, Ou Yang and Hou Zhen Long during the ENIAROF workshop at the Central Academy of Fine Arts, Beijing. The workshop was organised by Antonin Fourneau, Douglas Edric Stanley and Cheng-Liang Wang with assistance from Linekernel and Robin Moretti. It was financed by France-China 50, in celebration of 50 years of diplomatic relations between the two countries; The Central Academy of Fine Arts; and The Aix-en-Provence School of Arts.
cf. Snail Run
www.abstractmachine.net/blog/snail-run/
For the alt.crtl.gdc exhibition at the 2015 Game Developers Conference, Douglas Edric Stanley and Leanne Stanley rebuilt the Snail Controller while documenting their process. This how-to will be integrated into the future Book of Eniarof.
cf. The Book of Eniarof