View allAll Photos Tagged control_systems
The Simpson Hartley control system and compactability controller has been designed to precisely control green sand compactability, bond addition and water addition as well as provide full automation for an entire mixer/muller group. The compactability controller also measures and records green strength and moisture.
The Simpson Hartley control system and compactability controller has been designed to precisely control green sand compactability, bond addition and water addition as well as provide full automation for an entire mixer/muller group. The compactability controller also measures and records green strength and moisture.
Reaction Control System (RCS) thrusters help correct spacecraft orientation and are vital during docking procedures
The Simpson Hartley control system and compactability controller has been designed to precisely control green sand compactability, bond addition and water addition as well as provide full automation for an entire mixer/muller group. The compactability controller also measures and records green strength and moisture.
The Berlin S-Bahn [ɛs.baːn] is a rapid transit railway system in and around Berlin, the capital city of Germany. It has been in operation under this name since December 1930, having been previously called the special tariff area Berliner Stadt-, Ring- und Vorortbahnen (Berlin city, orbital, and suburban railways). It complements the Berlin U-Bahn and is the link to many outer-Berlin areas, such as Berlin Schönefeld Airport.
While in the first decades of this tariff zone the trains were steam-drawn, and even after the electrification of large parts of the network, a number of lines remained under steam, today the term S-Bahn is used in Berlin only for those lines and trains with third-rail electrical power transmission and the special Berlin S-Bahn loading gauge. The third unique technical feature of the Berlin S-Bahn, the automated mechanical train control, is being phased out and replaced by a communications-based train control system, but which again is specific to the Berlin S-Bahn.
In other parts of Germany and other German-speaking countries, other trains are designated S-Bahn without those Berlin specific features. The Hamburg S-Bahn is the only other system using third-rail electrification.
Today, the Berlin S-Bahn is no longer defined as this special tariff area of the national railway company, but is instead just one specific means of transportation, defined by its special technical characteristics, in an area-wide tariff administered by a public transport authority. The Berlin S-Bahn is now an integral part of the Verkehrsverbund Berlin-Brandenburg, the regional tariff zone for all kinds of public transit in and around Berlin and the federal state (Bundesland) of Brandenburg.
INTRODUCTION
The brand name "S-Bahn" chosen in 1930 mirrored U-Bahn, which had become the official brand name for the Berlin city-owned rapid transit lines begun under the name of Berliner Hoch- und Untergrundbahnen (Berlin elevated and underground lines), where the word of mouth had abbreviated "Untergrundbahn" to "U-Bahn", in parallel to "U-Boot" formed from "Unterseeboot" ("undersea boat" – submarine).
Services on the Berlin S-Bahn have been provided by the Prussian or German national railway company of the respective time, which means the Deutsche Reichsbahn-Gesellschaft after the First World War, the Deutsche Reichsbahn of the GDR (in both East and West Berlin) until 1993 (except West Berlin from 1984 to 1994, the BVG period) and Deutsche Bahn after its incorporation in 1994.
The Berlin S-Bahn consists today of 15 lines serving 166 stations, and runs over a total route length of 332 kilometres. The S-Bahn carried 395 million passengers in 2012. It is integrated with the mostly underground U-Bahn to form the backbone of Berlin's rapid transport system. Unlike the U-Bahn, the S-Bahn crosses Berlin city limits into the surrounding state of Brandenburg, e.g. to Potsdam.
Although the S- and U-Bahn are part of a unified fare system, they have different operators. The S-Bahn is operated by S-Bahn Berlin GmbH, a subsidiary of Deutsche Bahn, whereas the U-Bahn is run by Berliner Verkehrsbetriebe (BVG), the main public transit company for the city of Berlin.
OPERATION
NETWORK
The S-Bahn routes all feed into one of three core lines: a central, elevated east-west line (the Stadtbahn), a central, mostly underground north-south line (the Nord-Süd Tunnel), and a circular line (the Ringbahn). Outside the Ringbahn, suburban routes radiate in all directions.
Lines S1, S2, S25 and S26 are north-south lines that use the North-South tunnel as their midsection. They were equally distributed into Oranienburg, Bernau and Hennigsdorf in the north, and Teltow Stadt, Lichtenrade and Wannsee.
Lines S3, S5, S7, S9 and S75 are east-west lines using the Stadtbahn cross-city railway. The western termini are located at Potsdam and Spandau, although the S5 only runs as far as Westkreuz and the S75 to Ostkreuz. The eastern termini are Erkner, Strausberg Nord, Ahrensfelde and Wartenberg. The S9 uses a connector curve (Südkurve) at Ostkreuz to change from Stadtbahn to the South-eastern leg of the Ringbahn. Another curve, the Nordkurve to the North-eastern Ringbahn, was originally served by the S86 line, but it was demolished in preparation of the rebuilding of Ostkreuz station and was not rebuilt afterwards. Both connector curves were heavily used in the time of the Berlin Wall, as trains coming from the North-Eastern routes couldn't use the West Berlin North-South route and the Southern leg of the pre- and post-Wall Ringbahn was in West Berlin.
Lines S41 and S42 continuously circle around the Ringbahn, the former clockwise, the latter anti-clockwise. Lines S45, S46 and S47 link destinations in the southeast with the southern section of the Ringbahn via the tangential link from the Görlitzer Bahn to the Ring via Köllnische Heide.
Lines S8 and S85 are north-south lines using the eastern section of the Ringbahn between Bornholmer Straße and Treptower Park via Ostkreuz, using the Görlitzer Bahn in the South.
SERVICE HOURS
The S-Bahn generally operates between 4am and 1am Monday to Friday, between 5am and 1am on Saturdays and between 6:30am and 1am on Sundays during normal daytime service. However, there is a comprehensive night-time service on most lines between 1am and 5am on Saturdays and 01:00 and 06:30 on Sundays, which means that most stations enjoy a continuous service between Friday morning and Sunday evening. One exception to this is the section of the S 8 between Blankenburg and Hohen Neuendorf which sees no service in these hours. Most other lines operate without route changes, but some are curtailed or extended during nighttime. Particularly, the S 1, S 2, S 25, S 3, S 41, S 42, S 5, S 7 are unchanged, and the S 45 and S 85 have no nighttime service. Westbound lines S 46, S 47, S 75, and northbound S 9 terminate at stations Südkreuz, Schöneweide, Lichtenberg and Treptower Park, respectively.
HISTORY
FROM THE BEGINNINGS TILL END OF WORLD WAR II
With individual sections dating from the 1870s, the S-Bahn was formed in time as the network of suburban commuter railways running into Berlin, then interconnected by the circular railway connecting the various terminal railway stations, and in 1882 enhanced by the east-west cross-city line (called the "Stadtbahn", "city railway"). The forming of a distinct identity for this network began with the establishment of a special tariff for the area which was then called the "Berliner Stadt-, Ring- und Vorortbahnen", and which differed from the normal railway tariff. While the regular railway tariff was based on multiplying the distance covered with a fixed price per kilometer, the special tariff for this Berlin tariff zone was based on a graduated tariff based on the number of stations touched during the travel.
The core of this network, that is the cross-city ("Stadtbahn") East-West line and the circular Ringbahn, and several suburban branches were converted from steam operation to a third-rail electric railway in the latter half of the 1920s. The Wannsee railway, the suburban line with the highest number of passengers, was electrified in 1932/33. A number of suburban trains remained steam-hauled, even after the Second World War.
After building the East-West cross-city line connecting western suburban lines, which until then terminated at Charlottenburg station with eastern suburban lines which had terminated at Frankfurter Bahnhof (later Schlesischer Bahnhof), the logical next step was a North-South cross-city line connecting the northern suburban lines terminating at Stettiner Bahnhof with the southern suburban lines terminating at the subsidiary stations of the Berlin Potsdamer Bahnhof. The first ideas for this project emerged only 10 years after the completion of the East-West cross-city line, with several concrete proposals resulting from a 1909 competition held by the Berlin city administration. Another concrete proposal, already very close to the final realisation, was put forward in 1926 by Professor Jenicke of Breslau university. Many sections of the S-Bahn were closed during the war, both through enemy action and flooding of the Nord-Süd-Bahn tunnel on 2 May 1945 during the final Battle of Berlin. The exact number of casualties is not known, but up to 200 people are presumed to have perished, since the tunnel was used as a public shelter and also served to house military wounded in trains on underground sidings. Service through the tunnel commenced again in 1947.
THE TIME OF EXPANSION
BEFORE THE CONSTR'UCTION OF BERLIN WALL
After hostilities ceased in 1945, Berlin was given special status as a "Four-Sector City," surrounded by the Soviet Occupation Zone, which later became the German Democratic Republic (GDR). The Allies had decided that S-Bahn service in the western sectors of Berlin should continue to be provided by the Reichsbahn (DR), which was by now the provider of railway services in East Germany. (Rail services in West Germany proper were provided by the new Deutsche Bundesbahn.)
Before the construction of the Berlin Wall in 1961, the Berlin S-Bahn had grown to about 335 kilometres. On the 13 August 1961, it was the biggest turning point in the operation and network for the S-Bahn.
As relations between East and West began to sour with the coming of the Cold War, it had become the victim of the hostilities. Although services continued operating through all occupation sectors, checkpoints were constructed on the borders with East Berlin and on-board "customs checks" were carried out on trains. From 1958 onward, some S-Bahn trains ran non-stop through the western sectors from stations in East Berlin to stations on outlying sections in East Germany so as to avoid the need for such controls. East German government employees were then forbidden to use the S-Bahn since it travelled through West Berlin.
AFTER THE CONSTRUCTION OF BERLIN WALL
The S-Bahn has also been operated in two separate subnets of the Deutsche Reichsbahn. In East Berlin, the S-Bahn retained a transport share of approximately 35 percent, the mode of transport with the highest passenger share. In the 1970s and 1980s the route network continued to grow. In particular, the new housing estates were connected to the grid in the northeast of the city (Marzahn and Hohenschönhausen).
The construction of the Berlin Wall led to West Berlin calling for the unions and politicians to boycott the S-Bahn. Subsequently, passenger numbers fell.
However, the Berlin S-Bahn strike brought the S-Bahn to the attention of the public, and aroused the desire to for West Berlin to manage its section of the S-Bahn itself. In 1983 negotiations of representatives of the Senate, the SNB and the Deutsche Reichsbahn took place. In December 1983, these were concluded with Allied consent to the agreement between the Deutsche Reichsbahn and the Berlin Senate for the transfer of operating rights of the S-Bahn in the area of West Berlin. The BVG received the oldest carriages from the DR; but the BVG was eager to quickly get to modern standards for a subway. Therefore, soon new S-Bahn trains were purchased on their behalf, which are still in use on the Berlin S-Bahn network as the 480 series.
Even before the Wall fell, there were efforts to substantial re-commissioning of the S-Bahn network in West Berlin.
REUNIFICATION
After the Berlin Wall came down in November 1989, the first broken links were re-established, with Friedrichstraße on 1 July 1990, as the first. The BVG and DR jointly marketed the services soon after the reunification. Administratively, the divided S-Bahn networks remained separate in this time of momentous changes, encompassing German reunification and reunification of Berlin into a single city, although the dividing line was no longer the former Berlin Wall. DR and BVG (of the whole of reunified Berlin from 1 January 1992, after absorbing BVB of East Berlin) operated individual lines end to end, both into the other party's territories. For example, S2 was all BVG even after it was extended northward and southward into Brandenburg/former East German territory. The main east-west route (Stadtbahn) was a joint operation. Individual trains were operated by either BVG or DR end-to-end on the same tracks. This arrangement ended on 1 January 1994, with the creation of Deutsche Bahn due to the merger between DR and the former West Germany's Deutsche Bundesbahn. All S-Bahn operations in Berlin were transferred to the newly formed S-Bahn Berlin GmbH as a subsidiary of Deutsche Bahn, and the BVG withdrew from running S-Bahn services.
Technically, a number of projects followed in the steps of re-establishing broken links in order to restore the former S-Bahn network to its 1961 status after 1990,
especially the Ringbahn. In December 1997 the connection between Neukölln and Treptower Park via Sonnenallee was reopened, enabling S4 trains to run 75% of the whole ring between Schönhauser Allee and Jungfernheide. On 16 June 2002, the section Gesundbrunnen – Westhafen also reopened, re-establishing the Ringbahn operations.
EXPANSION
REDEVELOPMENT PROJECTS
OSTKREUZ
In 1988, Deutsche Reichsbahn presented plans for the transformation of Ostkreuz station. The long postponed renovation of the station began in 2007.
With nine lines (four on the Stadtbahn and five on the Ringbahn), Ostkreuz is one of the busiest stations on the network. Since the reconstruction is taking place during full operations. Work under the current plans was original projected to be completed by 2016, but it has been delayed and it is now expected to be completed in 2018.
With the progress of construction work on 31 August 2009, the southern connection and platform A were decommissioned. This route had to be realigned as a result. The construction plans envisaged that the connection would be restored by 2014. After its completion, traffic will again be able to be run from the southern Ringbahn onto the Stadtbahn.
In October 2009, the new Regionalbahn station on the Ringbahn was sufficiently complete for S-Bahn trains on the Ringbahn to use it temporarily. Demolition of the Ringbahn platform could then start and the new platform, including a concourse, could be built. This was put into operation on 16 April 2012, after a 16-day possession.
WIKIPEDIA
Anson Beattie, district sales manager of John Deere Green Tech, poses next to the Smart Irrigation Control System in the City of Calabasas.
Find class leading security and access control systems at Quanticsecurity.com.au a place to get best security Newcastle. Visit: quanticsecurity.com.au/
The Simpson Hartley control system and compactability controller has been designed to precisely control green sand compactability, bond addition and water addition as well as provide full automation for an entire mixer/muller group. The compactability controller also measures and records green strength and moisture.
www.jmelectricalservices.com/process-control-systems.php
We not only provide electricians for commercial customers but we also have a team of industrial electricians available for specialised industrial work and electrical installations.
Building 2 Twinwoods Business Park, Thurleigh Road, Milton Ernest, Bedford, MK441FD.
Fire control system panel for the bow torpedo room- this is where power and other settings are controlled for the torpedos in the tubes.
Siemens Control Systems supporting EDDL enhancements and these are just some of the systems supporting EDDL.
Brand-New Multi Functions for Control systems of Led gas price signs which it's including the Main control card/Receiving antenna/light sensor /Remote control #controllerbox #comtrolcard #microcontrollers #remotecontrolled #lightsensors #antennas #GASOLINERAS #PetrolTotemLEDLights #ledlightingsolutions #oilpricedisplay #Gaspricechanger #gasstation⛽️
Landscape lighting swimming pool remote control t.co/32rdb6L1zR
How to add landscape lights to swimming pool control system Our low volt lighting systems are so versatile & adaptable that they can even be integrated into your swimming pool digital control automation sy…
— Hudson Street Lighting, LLC (@hudsonstreet_tx) March 4, 2019
Title: Air Conditioning Vent Controller
Abstract: The purpose of an air conditioning vent control system has two main focuses. The first is to help people who would like to open and close their household ac vent and the second is to improve the efficiency of their current household air conditioning systems. This system focuses on utilizing a microcontroller that can be programmed to control a servo motor to operate a ac vent. Our design will be simple, cost effective, and easy to install. Our goal is to manage the air temperature of a room by operating a vent with a push of a button, which will control airflow, and thus improve energy efficiency. To accomplish this, we purchased a low cost TI EZ430-RF2500 development tool and a high torque servo motor. We also developed the software and mechanical components we needed to operate a home ac vent. We will demonstrate a working prototype of an ac vent, in an open and closed loop. This solution will provide both help to the person whom uses this in their home and energy efficiency savings on their monthly electric bills.
Contact for Buying Security Products such as CCTV Cameras, Home automation system, Access Control Systems, and more of Samsung Korea enterprises solutions
XYG Group
Professional Led Display Manufacturer
NovaStar control system
High Quality Products&Welcome to DM me for inquiries
Spirit&Success Together
Application:1. indoor museumUrban cultural experience
2. Commercial complex
3. Cultural tourism application
4. Stage rental application
5. Fitness application
Piexl pitch:P2.5 P 2.976 P3.91 P4.81 P5.2 P6.25 P7.8125 P8.928(indoor) P6.25；P7.8125；P8.928(outdoor)
The size of the area depends on your needsWhat's app:+86 18038197050 E-mail:sale01@xygledscreen.com website:https://www.xygledscreen.com
#xygled
Standard Traction Control System (TCS) enhances traction in poor conditions for superior control
See more at www.mazdausa.com
Investment in home automation is never a waste. www.edesignhawaii.com provides all these conveniences at your door step including alarm systems, adjusting thermostat, switching on and off, security camera system and so on.
Universal Lighting Technologies’ DCL Control System is a flexible and affordable wireless control that is designed to communicate with Demandflex high-efficiency ballasts over existing power lines, eliminating the need for expensive rewiring. With the WTDCL Time Controller, all programming is achieved by front-panel keystrokes with no computer or special commissioning tools required. The RSMDCL Relay Sensing Module Controller allows DCL Control Systems to interface with external controls such as building automation systems or programmable logic controllers.
The General Dynamics F-16 Fighting Falcon is an American single-engine supersonic multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). Designed as an air superiority day fighter, it evolved into a successful all-weather multirole aircraft with over 4,600 built since 1976. Although no longer purchased by the U.S. Air Force, improved versions are being built for export. In 1993, General Dynamics sold its aircraft manufacturing business to the Lockheed Corporation, which became part of Lockheed Martin after a 1995 merger with Martin Marietta.
The F-16's key features include a frameless bubble canopy for enhanced cockpit visibility, a side-mounted control stick to ease control while maneuvering, an ejection seat reclined 30 degrees from vertical to reduce the effect of g-forces on the pilot, and the first use of a relaxed static stability/fly-by-wire flight control system that helps to make it an agile aircraft. The fighter has a single turbofan engine, an internal M61 Vulcan cannon and 11 hardpoints. Although officially named "Fighting Falcon", the aircraft is commonly known by the nickname "Viper" among its crews and pilots.
In addition to active duty in the U.S. Air Force, Air Force Reserve Command, and Air National Guard units, the aircraft is also used by the U.S. Air Force Thunderbirds aerial demonstration team, the US Air Combat Command F-16 Viper Demonstration Team, and as an adversary/aggressor aircraft by the United States Navy. The F-16 has also been procured by the air forces of 25 other nations. As of 2025, it is the world's most common fixed-wing aircraft in military service, with 2,084 F-16s operational.
The F-16C (single seat) and F-16D (two seat) variants entered production in 1984. The first C/D version was the Block 25 with improved cockpit avionics and radar which added all-weather capability with beyond-visual-range (BVR) AIM-7 and AIM-120 air-air missiles. Block 30/32, 40/42, and 50/52 were later C/D versions. The F-16C/D had a unit cost of US$18.8 million (1998). Operational cost per flight hour has been estimated at $7,000 to $22,470 or $24,000, depending on the calculation method.