View allAll Photos Tagged Digitization
We used a Microsoft Kinect and SCENECT to laser scan 3D models of various objects.
We're currently in the process of digitizing the Lear Siegler ADM-3A serial terminal.
BugBlue is monitoring the scan progress and giving instructions to MacSimski (the Kinect operator).
MacSimski built the rotating disc out of a motor, computer power supply, skateboard wheels and some wood. Both speed and direction can be adjusted.
Our IBM Office System/6 can be seen in the background.
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights:
- 0.40 mm (400 microns)
- 0.30 mm (300 microns)
- 0.20 mm (200 microns)
- 0.10 mm (100 microns) - Average width of a strand of human hair
- 0.05 mm (50 microns)
- 0.02 mm (20 microns)
All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C.
All layers where 3D printed with MakerWare's standard values as follows:
(400 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(300 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(200 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(100 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(50 microns) - 15% infill - perimeters 2 - speed 60 mm/s
(20 microns) - 15% infill - perimeters 2 - speed 40 mm/s
---
The 3D scanner: bit.ly/1a7y8hG
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:146265
30 January, 1945.
27th Infantry Regiment, 25th Infantry Division.
Photographer: Bloom.
Photo Source: U.S. National Archives. Digitized by Signal Corps Archive.
One of my latest projects involves preserving old 8mm family movies. My father was an avid movie film buff back in the day when I was growing up - well, it started well before I was born, actually. Anyway, I have a decent collection of movies along with his Kodak Brownie movie camera, still working projector and even a movie screen. But I wanted to digitize the movies, and so I recently purchased this KODAK REELS film digitizer, and I've been making my way through the process of digitizing old family movies (time consuming, let me tell you). This device is honestly working really great - I'm wicked impressed with it so far. I thought it would be fun to upload a brief clip showing it in action. And yes, the movie image on the screen is me as a child. From here, I plan to upload a few random clips - likely just odd stuff that seems cool to me in a retro and artsy way. Don't expect much in the way of family clips, however. :)
Early aerial survey data digitizing. Forest Pest Management. Regional Office, Portland, Oregon.
Photo by and courtesy of: William M. Ciesla
Date: 1988
Credit: USDA Forest Service, Region 6, State and Private Forestry, Forest Health Protection.
Collection: William M. Ciesla collection; Fort Collins, Colorado.
Bill Ciesla summarized his role in the introduction of GIS to Region 6 in his 2005 Founder's Award address (wfiwc.org/awards/founders-award/speech/ciesla):
"One of the technologies we began to evaluate early on at MAG was geographic information systems (GIS). The ability to integrate spatial information on insect and disease damage with land ownership, vegetation types and other thematic map layers and generate data tables using a computer was, to us in MAG, a fascinating concept. Soon terms such as "polygons, arcs, points, digitizing" and "overlay processing" became an integral part of our vocabulary. Unfortunately, there were people in the Forest Service that didn't share our enthusiasm and had some real concerns about committing to this technology. For a time, a moratorium was placed on GIS development and implementation in the Forest Service until some basic issues could be addressed. However, after we moved to Fort Collins, we developed a partnership with the Western Energy Land Use Team (WELUT) of the U.S. Fish and Wildlife Service, which had an office in the same complex we were housed. This group had developed one of the first working and user friendly GIS, a system known as the Map Overlay Statistical System (MOSS). Together we conducted a number of tests and demonstrations with this system (Pence et al. 1983), organized GIS training sessions and eventually made a copy of the MOSS software available to R-6.
...
By the time I arrived in R-6, some the FPM staff was already involved in the use of the MOSS GIS, which my former unit, MAG, had made available several years earlier. With a little encouragement, in 1989, Tommy Gregg, Kathy Sheehan, Tim McConnell and several others on the FPM staff produced the first R-6 regional insect conditions map generated by a GIS. One of my proudest moments was to display this map at a meeting of the R-6 Leadership Team."
Image provided by USDA Forest Service, Pacific Northwest Region, State and Private Forestry, Forest Health Protection: www.fs.usda.gov/main/r6/forest-grasslandhealth
We librarians are stuck in the thought that digitalization has to be something fancy and you need to be a professional in librarianship to do it and to benefit from it. That's bullshit of course. A lot of students read a pile of photocopies and then throw the pile away after the exam. We librarians should support the digitalization of these photocopies and offer e-book readers to our patrons as an alternative for reading these texts.
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights:
- 0.40 mm (400 microns)
- 0.30 mm (300 microns)
- 0.20 mm (200 microns)
- 0.10 mm (100 microns) - Average width of a strand of human hair
- 0.05 mm (50 microns)
- 0.02 mm (20 microns)
All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C.
All layers where 3D printed with MakerWare's standard values as follows:
(400 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(300 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(200 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(100 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(50 microns) - 15% infill - perimeters 2 - speed 60 mm/s
(20 microns) - 15% infill - perimeters 2 - speed 40 mm/s
---
The 3D scanner: bit.ly/1a7y8hG
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:146265
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights:
- 0.40 mm (400 microns)
- 0.30 mm (300 microns)
- 0.20 mm (200 microns)
- 0.10 mm (100 microns) - Average width of a strand of human hair
- 0.05 mm (50 microns)
- 0.02 mm (20 microns)
All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C.
All layers where 3D printed with MakerWare's standard values as follows:
(400 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(300 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(200 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(100 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(50 microns) - 15% infill - perimeters 2 - speed 60 mm/s
(20 microns) - 15% infill - perimeters 2 - speed 40 mm/s
---
The 3D scanner: bit.ly/1a7y8hG
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:146265
I am cleaning up my office. It's a very long-running process. I threw away a bunch of pre-recorded cassettes, but then I found this trove of recordings of bands I've been in, informal "ensembles" I played in, solo "studio" work, the work of friends, etc.
I knew I needed to at least digitize this music, but I had no good cassette deck. The last Nakamichi I bought off eBay years ago came to me dead on arrival, and the seller disappeared. So, I took a chance on an even nicer one (a BX300) that has been restored. So far so good, and I'm reliving a lot of old memories while I organize the tapes for later digitization.
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights:
- 0.40 mm (400 microns)
- 0.30 mm (300 microns)
- 0.20 mm (200 microns)
- 0.10 mm (100 microns) - Average width of a strand of human hair
- 0.05 mm (50 microns)
- 0.02 mm (20 microns)
All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C.
All layers where 3D printed with MakerWare's standard values as follows:
(400 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(300 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(200 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(100 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(50 microns) - 15% infill - perimeters 2 - speed 60 mm/s
(20 microns) - 15% infill - perimeters 2 - speed 40 mm/s
---
The 3D scanner: bit.ly/1a7y8hG
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:146265
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights:
- 0.40 mm (400 microns)
- 0.30 mm (300 microns)
- 0.20 mm (200 microns)
- 0.10 mm (100 microns) - Average width of a strand of human hair
- 0.05 mm (50 microns)
- 0.02 mm (20 microns)
All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C.
All layers where 3D printed with MakerWare's standard values as follows:
(400 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(300 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(200 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(100 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(50 microns) - 15% infill - perimeters 2 - speed 60 mm/s
(20 microns) - 15% infill - perimeters 2 - speed 40 mm/s
---
The 3D scanner: bit.ly/1a7y8hG
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:146265
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights:
- 0.40 mm (400 microns)
- 0.30 mm (300 microns)
- 0.20 mm (200 microns)
- 0.10 mm (100 microns) - Average width of a strand of human hair
- 0.05 mm (50 microns)
- 0.02 mm (20 microns)
All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C.
All layers where 3D printed with MakerWare's standard values as follows:
(400 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(300 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(200 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(100 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(50 microns) - 15% infill - perimeters 2 - speed 60 mm/s
(20 microns) - 15% infill - perimeters 2 - speed 40 mm/s
---
The 3D scanner: bit.ly/1a7y8hG
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:146265
I've lost track of how many months this took me, but I finally accomplished one of my many space-saving goals of digitizing all my VHS tapes. All these tapes fit onto this teeny little external hard disk with a few hundred GB to spare -- all without losing any of the (minimal) quality of the originals.
On 14 September 2012, ITU Library and Archives organized a one-day event, Digitization Day 2012, that focused on digitization projects and best practices for librarians, archivists, and information professionals.
Diversity: Digitized In The Game Tour @ Capital FM Arena, on April 03rd, 2012 in Nottingham, United Kingdom
A LOT more photographs of Diversity to come soon....
© Ollie Millington.
All rights reserved. Use without permission is illegal !
You can see my best photographs of 2011 by clicking
here .
My Website currently undergoing a facelift...
Images of the BERNINA Embroidery Software 9 including shots of embroidery projects, software screens, machine embroidery action and BERNINA Embroidery Software expert Sue O'Very-Pruitt. For more information please visit www.bernina.com/software
Finally digitized this creation. It has a few more fixes, namely a more clear interior, folding fins, better guns, and rear landing gear. The arms also move up and down at the shoulder area slightly but I forgot to animate that. There are instructions for this model here: rebrickable.com/mocs/MOC-47640/TheRealBeef1213/prowler
here is a animation of the new pods in action: imgur.com/8LIaAfc
at the World Economic Forum - Annual Meeting of the New Champions in Tianjin, People's Republic of China 2016. Copyright by World Economic Forum / Jakob Polacsek
We're delighted to announce that we've digitised another two years of the Dublin City Electoral Lists and the entries for 1908, 1909 and 1910 are now fully searchable at www.dublinheritage.ie - a great resource for family history, local history and social history, the database now contains 160,600 records
The electoral lists are a unique record of Dubliners during the late 19th and early 20th centuries.
In our Dublin City Electoral Lists project we plan to digitise all of the Dublin City Council Electoral Lists 1898-1916 - part of the City Council's activities during the Decade of Commemorations.
(1 May 2014)
Digitized with Negative Lab Pro v2.1.2
Leica M3 | Leica Voigtlander Nokton Vintage Line 50mm f/1.5 Aspherical II VM Multi-Coated | Kodak TriX 400
Digitized with Negative Lab Pro v2.1.2
Ravi Agrawal, Bureau Chief, South Asia, CNN International, India at the India Economic Summit 2016 in New Delhi, India, Copyright by World Economic Forum / Benedikt von Loebell
Aakar Patel, Executive Director, Amnesty International, India at the India Economic Summit 2016 in New Delhi, India, Copyright by World Economic Forum / Benedikt von Loebell
Digitized from a 1997 Kodak Gold negative film using a Canon R5 in 2024…….27 years later. The original film was photographed with a Canon EOS Elan
A petroglyph is an image created on rock by scraping or in other ways creating that image in the rock surface. They are found world-wide and are usually associated with ancient peoples but these petroglyphs range from as old as 16,000 years and some are estimated to be as recent as the 1800s.
Found in a protected canyon in the Mojave Desert of California situated on a US Military base.
Image - Copyright 2024 Alan Vernon
PictionID:44399864 - Catalog:14_011238 - Title:Facilities Details: Building 1 from South; Mark-2 Proposal Date: 11/01/1962 - Filename:14_011238.TIF - - - - - Image from the Convair/General Dynamics Astronautics Atlas Negative Collection. The processing, cataloging and digitization of these images has been made possible by a generous National Historical Publications and Records grant from the National Archives and Records Administration---Please Tag these images so that the information can be permanently stored with the digital file.---Repository: San Diego Air and Space Museum
This Book of Hours was created ca. 1470 in Bruges by a follower of Willem Vrelant. The manuscript contains eleven extant large miniatures and one small miniature, which are representative of the standard style established by Willem Vrelant. Collects following the Office of the Dead are for a mother, father, deceased male, and a female suppliant, which offers insight into the book's use.
To explore fully digitized manuscripts with a virtual page-turning application, please visit Walters Ex Libris.
We're delighted to announce that we've digitised another two years of the Dublin City Electoral Lists and the entries for 1908, 1909 and 1910 are now fully searchable at www.dublinheritage.ie - a great resource for family history, local history and social history, the database now contains 160,600 records
The electoral lists are a unique record of Dubliners during the late 19th and early 20th centuries.
In our Dublin City Electoral Lists project we plan to digitise all of the Dublin City Council Electoral Lists 1898-1916 - part of the City Council's activities during the Decade of Commemorations.
(1 May 2014)
One of my earliest map fragments. The language seems very primitive. No different than cave paintings...
Digitized with Negative Lab Pro v2.1.2
Leica M6 | Leica Voigtlander Nokton Vintage Line 50mm f/1.5 Aspherical II VM Multi-Coated | Kodak TriX 400
Digitized with Negative Lab Pro v2.1.2
The MakerBot Digitizer 3D-scanned Laser Cat model was used in this test of different layer thicknesses. The cat was scaled down to 50 mm in height and then 3D printed at the following layer heights:
- 0.40 mm (400 microns)
- 0.30 mm (300 microns)
- 0.20 mm (200 microns)
- 0.10 mm (100 microns) - Average width of a strand of human hair
- 0.05 mm (50 microns)
- 0.02 mm (20 microns)
All six cats where 3D printed on a MakerBot Replicator 2 with TRUE BLUE PLA plastic at 230 degrees C.
All layers where 3D printed with MakerWare's standard values as follows:
(400 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(300 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(200 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(100 microns) - 15% infill - perimeters 2 - speed 90 mm/s
(50 microns) - 15% infill - perimeters 2 - speed 60 mm/s
(20 microns) - 15% infill - perimeters 2 - speed 40 mm/s
---
The 3D scanner: bit.ly/1a7y8hG
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:146265