View allAll Photos Tagged 1..turned
Lap 1, Turn 5 -
yeah i got more of this.... stay tuned...
if you saw the race, you know what happens...
Alberta Driver's 2006 Handbook
(Caution do not take this seriously, "some will & do")
1. Turn signals will give away your next move. A confident Alberta driver avoids using it.
2. Under no circumstance should you maintain a safe distance between you and the car in front of you, because the space will be filled in by somebody else, putting you in an even more dangerous situation.
3. The faster you drive through a red light, the less of a chance you have of getting hit.
4. Warning! Never come to a complete stop at a stop sign. No one expects it and it will result in your being rear-ended.
5. Never get in the way of an older car that needs extensive bodywork, especially with B.C. or Sask, plates. With no insurance, the other operator has nothing to lose.
6. Braking is to be done as hard and late as possible to ensure that your ABS kicks in, giving a vigorous, foot massage as the brake pedal violently pulsates. For those of you without ABS, it's a chance to strengthen your leg muscles.
7. Never pass on the left when you can pass on the right. It's a good way to prepare other drivers entering the highway.
8. Speed limits are arbitrary figures; given only as a suggestion and are not enforceable in Alberta during rush hour, especially in Calgary.
9. Just because you're in the left lane and have no room to speed up or move over doesn't mean that an Alberta driver flashing his high beams behind you doesn't think he can go faster in your spot.
10. Always brake and rubberneck when you see an accident or even someone changing a tire. This is seen as a sign of respect for the victim.
11. Learn to swerve abruptly without signaling. Alberta is the home of high-speed slalom-driving; thanks to the Department of Public Works, which puts pot-holes in key locations to test drivers' reflexes and keep them alert.
12. It is tradition in Alberta to honk your horn at cars in front of you that do not move three milliseconds after the light turns green.
13. To avoid injury in the event of a collision or rollover, it is important to exit your vehicle through the windshield right away. Wearing your seat belt will only impede your high-velocity escape from danger.
14. Remember that the goal of every Alberta driver is to get ahead of the pack by whatever means necessary.
&
15. In Alberta, flipping the bird' is considered a polite salute. This gesture should always be returned.
Thank You from, The Alberta Registrar of Horseless Carriages.
Plenário do Senado Federal durante sessão deliberativa ordinária. Ordem do dia.
Plenário vota, em 1° turno, a reforma da Previdência (PEC 6/2019).
À mesa:
senador Izalci (PSDB-DF);
senador Carlos Viana (PSD-MG);
presidente do Senado, senador Davi Alcolumbre (DEM-AP).
senador Eduardo Gomes (MDB-TO);
senador Marcio Bittar (MDB-AC).
Foto: Marcos Oliveira/Agência Senado
Leslie, Andrew, Craig and I played our second game on the easiest setting (four Epidemic cards). We were more careful this time to balance our efforts between managing outbreaks and curing diseases. With just 2 player cards (1 turn's worth) remaining, we cured the last disease to squeak out a victory. The scary thing is that we really got lucky because the 4th Epidemic card was at the bottom of the deck, so we effectively won on a "super easy" setting.
Pentax Spotmatic SP Test Roll
Lens: Carl Zeiss 50mm 1.8 Pancolar
Developer: D-23
Dilution: 1:3
Temp: 21c
Time: 17 mins.
Agitation: 1st 30 seconds then 1 turn every minute.
Arch Number and Arch Name: NM-663
Other arch reference numbers: NABSQNO 13S-245379-4078872
Arch Location (Country/State/County/Canyon): US/NM/San Juan/Slane Canyon
Arch reported and documented by (with dates): Edward Kotyk/August 2011
Arch Dimensions: Span 4 ft. Height 1 ft.
Type of rock / Type of arch: San Jose Sandstone / Fin arch
GPS UTM Coordinates (Zone, Easting / Northing): 13S 245379E / 4078872N
GPS Latitude/Longitude (Decimal Degrees): 36.82148 deg. N / 107.85469 deg. W
Land ownership: BLM GPS Datum: NAD83/WGS84
Additional comments: Photo by Edward Kotyk.
Directions: Take NM Highway 173 East from Aztec, NM to a gas well road at mile 8.1. Turn left (north) and follow the main road for 1.88 miles into upper Slane Canyon. Park safely along the road and walk across the wash to the east where the arch is located in the sandstone ridge. Arch NM-664 is also nearby.
Plenário do Senado Federal durante sessão deliberativa ordinária. Ordem do dia.
Plenário vota, em 1° turno, a reforma da Previdência (PEC 6/2019).
(E/D):
senador Luiz do Carmo (MDB-GO);
senador Marcelo Castro (MDB-PI).
Foto: Roque de Sá/Agência Senado
NICK(周湯豪)高雄場唱了3首歌，
1.《Turn up 》
2.《帥到分手》
3.《My Boo》
現唱聽很好聽，跳舞也很厲害。
他有達到我喜歡"行雲流水"那種律動，
就是可以馬上隨著音樂節奏，聞雞起舞，
現場看他跳舞真好看！
他跳的也是比舞群認真，動作也是比舞群大，
跟我之前看Selina 跳舞那種感受一樣，
「他就是王者是主角，這是他的場子」！
他出到第3張專輯，
我覺得他終於找到自己的曲風了，
其實第二張專輯《S.N.G》那時我就覺得不錯，
只是沒有很大的迴響。
這張《REAL》一出我光看連發3支MV
1.《帥到分手》
2.《你是我的菜》
3.《TURN UP》
就覺得會中，唱片公司有燒錢喔！
終於有公司好好栽培他了。
2017.1.14(六)只是簽唱會怎麼是4個月後啊？氣勢都減弱了。
I am a huge fan of "Fuller House"! So, when I saw Kimmy's cupcake scarf, I really wanted to make one for my doll. I created this pattern and wanted to share it with you. Enjoy this touch of Gibbler Style!!!
bumbledaph.blogspot.com/2016/03/how-to-make-doll-cupcake-...
Light purple, dark purple and red yarn
Size G crochet hook
Large needle
Beads for sprinkles
Thread to match cupcake top
Regular sewing needle
Pattern
Cupcake top- light purple
6 hdc in magic loop (leave a long tail), ch 2, turn (6)
2 hdc in each st, slip last stitch and leave a long tail (12)
Weave in end from magic loop
Pick up long tail in first stitch, ch 2
4 hdc in next stitch
Slip next stitch, ch 2
4 hdc in next stitch
Slip next stitch, ch 2
4 hdc in next stitch
Slip last stitch, weave in tail
Cupcake bottom - dark purple
Ch 6 (leave a long tail)
Skip first stitch, sc 5, ch 1, turn
5 sc in back loops only, ch 1, turn
5 sc in back loops only, ch 1, turn
5 sc in back loops only, ch 1, turn
5 sc in back loops only, slip last stitch and leave a long tail
Take one long tail and weave until on other side (2 long tails on each end), this step is not needed on first and last cupcake, just weave in one end
Cherry - red
4 sc in magic loop (leave long tail), join to first ch stitch, slip stitch
How-to connect
Sew cupcake bottom to cupcake top at half circle, tie off, weave in ends
Sew cherry on top of cupcake, weave in ends, cut tail on top short for cherry stem
Repeat until you have 6 attached cupcakes
Sew another 6 attached cupcakes (do not add cherry on the top cupcake of the second set)
Connect the cherry to the other cupcake, weave the stems on connecting cupcakes
Take a piece of light purple yarn and seam the two cupcakes tops together in the back
Sew on beads for sprinkles
Students from the Tri-Lakes high schools' Environmental Clubs gear up for
"10-10--10" and the 2nd annual Youth Climate Summit to be held at The Wild
Center on November 9th and 10th.
Students are volunteering for this Sunday's "10-10-10" event to raise
awareness about climate change. A fundraiser pancake breakfast at the
Shipman Youth Center in Lake Placid began the day serving at 9 AM and will
end at 1PM. Cost is $5, Children "10" and under $3. (Proceeds to go to the
HS Environmental Clubs).
Work party continues until 3 PM. Help us:
1) Turn your old t-shirts into tote bags
2) Plant garlic and winter cover crops in school garden
3) Build a compost system and a rain barrel and gutter system
Photo was taken by John Eldridge at the Shipman Youth Center as students
volunteer at Sunday's event.
--
John N. Eldridge
4 Snowberry Lane
P.O. Box 1515
Lake Placid, NY 12946
518-523-4196
jneldridge@gmail.com
Have you hugged Earth today?
Here Omnicity 1 departs on the 11:15am departure from Newbury Station to Vodafone HQ via Newbury town centre. I was slightly disappointed to see this arrive as Solar 1032 had departed on 10:45am departure (the train I arrived on was scheduled to arrive at 10:44am). Just after 11:15am, Omnicity 1 turned up displaying not in service so presumably this was the start of a new driver's duty.
Station Road, Newbury. 24th September 2013.
Arch Number and Arch Name: NM-659
Other arch reference numbers: NABSQNO 13S-246188-4077554
Arch Location (Country/State/County/Canyon): US/NM/San Juan/Slane Canyon
Arch reported and documented by (with dates): Edward Kotyk/August 2011
Arch Dimensions: Span 2.5 ft. Height 2.5 ft.
Type of rock / Type of arch: San Jose Sandstone / Pillar arch
GPS UTM Coordinates (Zone, Easting / Northing): 13S 246188E / 4077554N
GPS Latitude/Longitude (Decimal Degrees): 36.80983 deg. N / 107.84519 deg. W
Land ownership: BLM GPS Datum: NAD83/WGS84
Additional comments: Photo by Edward Kotyk.
Directions: Take NM Highway 173 East from Aztec, NM to a gas well road at mile 8.1. Turn left (north) and follow the main road for .7 mile into upper Slane Canyon. At .7, turn right (east) on a rudimentary road and go .25 mile to the end and park. Arch NM-659 is in the sandstone ridge to the east. Other arches are nearby.
ch 2, sc in first ch, ch 1, turn 180 (like pointlace cord), * ( sc, ch 1, turn) . Like Crayfish cord but + ch 1 before turn.
Variations : sc-> flsc ; sc-> blsc . No significant differences ?
Plenário do Senado Federal durante sessão deliberativa ordinária. Ordem do dia.
Plenário vota, em 1° turno, a reforma da Previdência (PEC 6/2019).
Bancada:
senador Elmano Férrer (Podemos-PI);
senador Fernando Bezerra Coelho (MDB-PE);
secretário especial de Previdência e Trabalho do Ministério da Economia, Rogério Marinho;
senador Eduardo Gomes (MDB-TO).
Foto: Roque de Sá/Agência Senado
Pentax Spotmatic SP Test Roll
Lens: Carl Zeiss 50mm 1.8 Pancolar
Developer: D-23
Dilution: 1:3
Temp: 21c
Time: 17 mins.
Agitation: 1st 30 seconds then 1 turn every minute.
Ion Orchard building, 1 Orchard Turn, (Cnr Orchard & Scotts Rds), Singapore.
Designed by leading architecture firm Benoy, who brought shoppers iconic malls such as the Bullring in Birmingham, UK, ION Orchard’s signature futuristic architecture has won two prestigious awards at MAPIC 2006 against stiff competition from submissions from around the world. The panel recognized that ION Orchard “demonstrates unique and progressive urban design” that will bring vitality to one of Southeast Asia’s most prominent sites.
The Benoy team looked to nature for inspiration and re-imagined the orchards that made up the origins of the site, continuing the theme of growth in the design: from seed to stem to tree. The powerful organic presence communicated through a uniquely free form feel, amorphous cladding and tree-like columns will provoke interaction between visitor and destination.
ION Orchard also won the Best Shopping Centre award at the MIPIM 2009 Awards.
Plenário do Senado Federal durante sessão deliberativa ordinária. Ordem do dia.
Plenário vota, em 1° turno, a reforma da Previdência (PEC 6/2019).
À mesa:
senador Izalci (PSDB-DF);
senador Carlos Viana (PSD-MG);
presidente do Senado, senador Davi Alcolumbre (DEM-AP).
senador Eduardo Gomes (MDB-TO);
senador Marcio Bittar (MDB-AC).
Foto: Marcos Oliveira/Agência Senado
Plenário do Senado Federal durante sessão deliberativa ordinária. Ordem do dia.
Plenário vota, em 1° turno, a reforma da Previdência (PEC 6/2019).
Participam:
senador Alessandro Vieira (Cidadania-SE);
senador Major Olimpio (PSL-SP).
Foto: Roque de Sá/Agência Senado
Pentax Spotmatic SP Test Roll
Lens: Carl Zeiss 50mm 1.8 Pancolar
Developer: D-23
Dilution: 1:3
Temp: 21c
Time: 17 mins.
Agitation: 1st 30 seconds then 1 turn every minute.
San Gregorio.
We started at Union City BART, rode over the Dumbarton Bridge, all the way down 84 to Highway 1. Turned South at the coast, then East on Pescadero Road. Stayed the night at Memorial Park (in the cheap little dome tent on the top of my rack), went home the next day.
My traveling companion took this picture with a cheap disposable film camera, and I mailed a print (in a stamped envelope) to Richard Schwinn at Waterford. I thought he'd like it, and didn't give it much thought after I dropped it in the mailbox.
Three years later, a customer came in to Cycle City and told me that I was on the Waterford website, but that my name wasn't right. I looked for myself and there I was. With the wrong name. I emailed Richard, and he responded quickly, apologized for the error, and corrected the photo's description on the website.
This image is still on Waterford's online rider's gallery. I still have this wonderful bike. I'll tour again.
Someday.
Plenário do Senado Federal durante sessão deliberativa ordinária. Ordem do dia.
Plenário vota, em 1° turno, a reforma da Previdência (PEC 6/2019).
Bancada:
senador Eduardo Braga (MDB-AM);
senador Fernando Bezerra Coelho (MDB-PE).
Foto: Roque de Sá/Agência Senado
Welcome!
1. Turn on ”Albums”, to see the items ordered in directories.
2. Being in the album, You can find a full description of the item, by clicking "SHOW MORE".
3. Contact me: drogamiecza@gmail.com (send a link, photo or the number, of interested item).
4. Check my profile on ebay. I am a Top Rated Seller: feedback.ebay.com/fdbk/feedback_profile/artur_drogamiecza
FB: www.facebook.com/artur.drogamiecza.5/
INSTA: www.instagram.com/artur.drogamiecza/
EBAY: www.ebay.com/sch/artur_drogamiecza/m.html?_nkw=&_armr...
Ion Orchard building, 1 Orchard Turn, (Cnr Orchard & Scotts Rds), Singapore.
Designed by leading architecture firm Benoy, who brought shoppers iconic malls such as the Bullring in Birmingham, UK, ION Orchard’s signature futuristic architecture has won two prestigious awards at MAPIC 2006 against stiff competition from submissions from around the world. The panel recognized that ION Orchard “demonstrates unique and progressive urban design” that will bring vitality to one of Southeast Asia’s most prominent sites.
The Benoy team looked to nature for inspiration and re-imagined the orchards that made up the origins of the site, continuing the theme of growth in the design: from seed to stem to tree. The powerful organic presence communicated through a uniquely free form feel, amorphous cladding and tree-like columns will provoke interaction between visitor and destination.
ION Orchard also won the Best Shopping Centre award at the MIPIM 2009 Awards.
Tech Stop @ Building 40 Mountain View, California
Picture from Carole Goble at scifoo 2007: day one
IMG_0260.JPG
>>>>>>>>>> click the "ALL SIZES" magnifying glass to see a bigger pic <<<<<<<<<
PARTS
• 2 or 3 12-position rotary switches (or 10-position, whatever you can get)
• 2 pin or banana jacks (to match your test leads)
• resistor assortment from 5 ohms to 1M or greater; gold bands (5% tolerance) are better than silver bands (10% tolerance).
• project box
INSTRUCTIONS
1- Get a box and drill holes for mounting two or three 12-position rotary switches. Drill holes also for the two jacks.
2- Mount the switches and the jacks; label switch positions with corresponding resistor values.
3- Follow this diagram and solder resistors directly to the lugs of the rotary switches.
NOTE: If you solder the resistors so their unsoldered leads extend the opposite direction of the switch's shaft, these leads can be gathered together and soldered at once, connected to the bus wire terminating in point "A".
• The first switch would provide the lowest resistance, the next would provide mid-range resistors, and the final switch would be wired to the resistors with the greatest resistance.
• As seen, the 12th lug of the depicted switch connects to the next switch in the array. Naturally, the final switch in the array would have its 12th lug connected to the final resistor in the matrix.
PANEL
To mark the panel for the resistor values:
1- Turn the mounted switches to position "1" (doesn't matter at all how you orient the switches, just turn them to their lowest resistor settings).
2- Place knobs loosely on shafts and turn their pointers to wherever you want "1" (your lowest resistor value) to be located around the dial (near top or bottom of dial, usually).
3- Once all pointers are angled to this position, tighten their set screws to keep them in place.
4- With your marker, put dots where the pointers point as you click them all around their orbits.
5- Label these dots with the corresponding resistor values. Position "12" can be marked with an arrow pointing to the next switch.
USAGE
1- Set all rotary switches to "12" for starting position. This will provide the greatest resistance available (this is safest on the circuit). Plug your test leads in.
2- Begin turning the LAST dial downward and observe the response of the circuit (LED brightness, audio output, circuit clocking - whatever you're after).
3- When you get to position "1" on this switch, turn the next rotary switch to position "11" to continue the resistance decrease, and so on until you reach the resistance value desired.
4- Observe the resistance the dial is pointing to; grab another resistor of the same value, and your green LED will never again scare you with that ember-like, off-yellow, over-voltage, "Seeya in LED Halvala" glow.
On the 2 Days i visited this lovely location hopeing to get some freight,not a single 1 turned up!
So the best i could do was this light engine move with 1116 120 + 1144 094 + 1116 266 passing Rosenegg on Saturday 26th May 2012.
Welcome!
1. Turn on ”Albums”, to see the items ordered in directories.
2. Being in the album, You can find a full description of the item, by clicking "SHOW MORE".
3. Contact me: drogamiecza@gmail.com (send a link, photo or the number, of interested item).
4. Check my profile on ebay. I am a Top Rated Seller: feedback.ebay.com/fdbk/feedback_profile/artur_drogamiecza
FB: www.facebook.com/artur.drogamiecza.5/
INSTA: www.instagram.com/artur.drogamiecza/
EBAY: www.ebay.com/sch/artur_drogamiecza/m.html?_nkw=&_armr...
Welcome!
1. Turn on ”Albums”, to see the items ordered in directories.
2. Being in the album, You can find a full description of the item, by clicking "SHOW MORE".
3. Contact me: drogamiecza@gmail.com (send a link, photo or the number, of interested item).
4. Check my profile on ebay. I am a Top Rated Seller: feedback.ebay.com/fdbk/feedback_profile/artur_drogamiecza
FB: www.facebook.com/artur.drogamiecza.5/
INSTA: www.instagram.com/artur.drogamiecza/
EBAY: www.ebay.com/sch/artur_drogamiecza/m.html?_nkw=&_armr...
This is a very high quality, cosmopolitan M1 Garand, and the bolt is a German Sauer and Son unit from Suhl (Thuringia), Germany, on a Breda receiver, and so on.
These were probably the best bolts ever produced for the Garand, and seem to have been the last. "Best" mainly means set up for used rifles and benefitting from latest technology. There isn't much to choose between the postwar specification bolts.
It is a stainless 1 turn in 12" barreled unit, in .308, a vastly more efficient and accurate round, far more similar to the original .276 Pedersen Center fire than was the .30 Model of 1906 with which this design fought in WW2 and Korea.
Fully copyrighted, all rights reserved. No reproduction of any kind without express WRITTEN permission.
Plenário do Senado Federal durante sessão deliberativa ordinária. Ordem do dia.
Plenário vota, em 1° turno, a reforma da Previdência (PEC 6/2019).
À tribuna, em discurso, senador Jorge Kajuru (Cidadania-GO).
Mesa:
senador Izalci (PSDB-DF);
presidente do Senado Federal, senador Davi Alcolumbre (DEM-AP);
secretário-geral da Mesa, Luiz Fernando Bandeira de Mello Filho;
senador Jayme Campos (DEM-MT).
Foto: Marcos Oliveira/Agência Senado
This is Búzios, a beach village in Rio, shot during a windy afternoon using a 1960's Brownie 127 (second model), loaded with very expired 35mm Kodak Portra-160, hand-spooled to 127 backing paper and developed on BW chemicals (D76 1:1) - turned to grayscale on PS.
M’ILLUMINO DI MENO
Energy Saving Day
- 13 February 2009 - 6 pm -
M’illumino di meno (I will use less light) is both one of the most important awareness campaigns on energy saving and a widespread symbolic one day event. It was first launched on 16 February 2005, when the Kyoto Protocol, aimed at reducing greenhouse gas emissions from developed nations, came into force.
National Energy Saving Day The day’s philosophy is to convince as many people as possible to focus on saving energy. Everybody will be asked to reduce their private energy consumption to the minimum from 6:00-7:30pm. By doing so the maximum visibility in the media and the largest participation by common people are concentrated on the Energy Saving Day.
The fifth National Energy Saving Day will be held on 13 February 2009. The initiative has received for the second year the Patronage of the European Parliament and aims to grow as a European and world experience
Good habits for February 13 (and after!)
1. turn off the lights when not needed
2. turn off the electronic stand-by (options on all appliances.)
3. frequently defrost the refrigerator, keep the coil clean and away from the wall so air can circulate
4. put the lid on pots when you boil water and avoid as long as the flame is wider than the bottom of the pot (?) questa no la capisco
5. if you lower the heat radiators instead of opening windows
6. reducing fixtures (leakage)spifferi of (insulation)filling material that does not (circulate)move air
7. use tends(drapes) to create spaces in front of the windows, the fixtures, doors external
8. Do not leave curtains closed(drawn) in front of radiators
9. insert special film and reflective insulation between the outer walls and the radiators
10. use the car as little as possible and if necessary with those who share the same route.
And remember to turn off all lights and electrical devices (that) are not indispensable Friday February 13 at 18.00!
The initiative was first launched by Caterpillar, a popular and successful live radio program which reaches more than a million listeners per day. Caterpillar is broadcast by Radio2, the entertaining channel of RAI, the Italian Public Service Broadcaster. The program airs from 6pm to 7:30pm, Monday to Friday and deals with major issues and themes in the world in an informal and ironic way underlining contradictions and paradoxes in our society.