View allAll Photos Tagged racking
This a shot of the racks we have at GU2 the student radio station of Surrey University where I am technical manager.
The large one houses our logging, web streaming and storage servers as well as the main playout PC and the general purpose web PC At teh top we have teh patch panels and multicore cables from the studios going into limiters. These take care of the blinky lights quota.
The smaller rack houses our AM transmitter, a mono 5 band equaliser as well as CCTV, Sat TV and an AM reciever.
The rest is just Technical storage/mess.
A Nitto "Mark's rack", kindly modified to fit the fork crown threaded mounts by Rob Perks. I have a bench vise, I could have done it myself, but I would have scarred up the struts somehow I think.
The fender is obviously not attached yet. It's an old set of Velo Orange fenders I'd picked up for another project that ended up going another way. May use them here, but trying to decide if fluted looks best or smooth (or, possibly hammered). Or I could do like Peter Weigle and paint the center panel of the fender a nice matching yellow or contrasting cobalt to match the headset. Decisions, decisions.
850+ Sections of Frazier Pallet Racking LIKE NEW FOB NJ
Like new, wire-guided rack system.
820 ea. C-3" uprights 42" D x 26'
120 ea. C-3" uprights 42" D x 28'
8,000 ea. C-3" beams 96" x 3" channel
3,000 ea. C-4" beams 96" x 4" channel
Call John Geddes @ 732-684-7890
I was looking so forward to this re-ment clothing rack. All looked great until I removed the rack from it's box and noticed rods had fallen of and more rods just let go when I tried to glue one T_T..I'm getting a partial refund but I'm so unhappy about this sight.
Bike racks in Portland are a cottage industry for creative minds turning functional design into bold and aesthetic statements in public art.
Wine Rack... Spacers between the Back rests and the back of the rack to give me a little more support.
Sanded, clear-coated, and ready for me to get a couple of plastic washers to keep the sharp edges of the rack mounts away from the carbon fiber fabric.
Coatracks can be used to turn any area into a Coat room. Disposable three-part Coat Check tags are put in numrical order on every hanger on each coat rack.
When a guest arrives for the event, they hand their coat to the attendant. The attendant puts the coat on one of the hangers and tears off the stub to give to the guest.
When the guest is ready to leave, they hand their ticket to the coat room attendant. It is easy to locate the coat because the numbers are consecutive. The attendant retrieves the correct coat and delivers it to the guest.
This is a great way to securely store coats at any event.
Bike racks designed by David Byrne. They are part of the Anderson Collection at Stanford University, but can be used to lock up your bike.
They also display the closeness to Silicon Valley.
You are looking for ways to add style and design to wall surfaces, think about enhancing with wall wine racks. When placed on a wall beside a bar, in a dining room, in a cooking area, or yet another picked location, a wall wine rack can make a very outstanding and eye-grabbing show. The choices for wall wine racks teem, and they are readily available in a wide variety of dimensions and layouts.Visit our site inwallcabinets.com/wooden-wine-rack-cabinets.html for more information on Wine Rack
I was sewing together a handlebar bag and the needle started to get dull, so the thread started binding and breaking. By the time I realized that it was the needle's fault I was already quite frustrated, so I decided I would stop and take out my frustrations on something else.
"something else", in this context, is the porteur rack bed I'd made, but not brazed, a year and a half ago.
The jointwork is not what I'd call precise, but there's only one place where the brass didn't flow into the entire joint, and it's not the single stainless steel lug that I used to fasten the perimeter together.
The plan is, if I can find it, to use an old license plate as a deck (I found an old plate lying alongside 224 the last time I went up to Ripplebrook, but I'm no longer sure just where it is) but that's going to wait until I flow some more brass into that one bad joint, and get the fork and leg struts brazed on.
Public Arts Bike Racks in Pittsburgh
· This bike rack by Robert Raczka looks like a section of fence. Honestly I wouldn't have known it was a bike rack if someone hadn't locked up to it.
On the other hand, the artist explains, "When I can't find a bike rack, I do what many bicyclists do: look for a sturdy fence to lock my bike to."
This bike rack at the Jewel-Osco at 106th & Avenue B is right up against a wooden fence, and not even bolted down. (Chicagoland Bike & Walk Photo Contest)
The hot-air end of the main server racks. Looks a lot nicer fully assembled :) Picture taken from the northwest corner of the room.
Paul + Phyllis House Warming.
Nicely marinated with Cumin powder, piri piri chillie powder, salt, spring onions ... yum yum
I picked up this wood & masonite sandpaper rack today for $5.00 at Midwest Hardware's Going out of Business There were like 5-6 layers of masking tape over the front edge covering all the wording up. Most of the tape is off now. There were about 20 decals with price increases stuck on the sides inline with each shelf. The decals literally fell off whe the scrapper hit them.
The vertical edge on the left read Wet or Dry Production Papers. The right edge reads Fine, Very Fine, Super Fine, (Larry Fine - just kidding), Course, Very Course and Super Course.
Set up for my fall commute. Ruthworks SF canvas handlebar bag. Gallus Cycles custom racks, nickel plated. Clement MSO tiny knobbies help on unpaved paths, but kick up a lot of dust and get the bike dirty :-|
This rack can fit wood slats, a 18" wald basket [with a plywood base] or bare like this one pictured. Has threaded dual light mounts that can fit a variety of lights, but these are the best [B&M IQ Fly plus [LED and standlight] and a Minimag 3 watt LED, 2 cell AAA. the rack is used in conjucntion with a Delta cargo bunji net.
The basement closet is near one of the support beams that is stressed. If closet doors are racked or doors are not closing well, these issues may well be indicators of foundation issues as it is in this home. If this looks familiar? Contact Peak Structural at 303 243 3028 or www.peakstructural.com/
We hope we have found an idea for a towel rack. With the roll being vertical, a streak of Elmers will keep it from unrolling too easily.
*** Since this photo was taken & posted, I replaced the small leather disk towel support with one about 4 1/2 inches in diameter.
I took this picture of the bike racks outside of the biology building. The racks make it easy to ride a bike to class and not have to drive. The paved sidewalks make it easy to ride bikes to class. This is an alternative that will make you in better shape and help the environment!
Rack para plantas e violetas feito com ripas de caçamba e acabamento em pátina e pratos para não deixar agua escorrer adaptadas com potes plásticos de manteiga e cup noodles.
+++
This is a rack for violets done with demolition boards and using plastic cups of noodles to hold the water
Cool way to tie a towel on a rack - Feel free to use this photo for your website or blog as long as you include photo credit with a clickable (hyperlinked) and do-follow link to www.homespothq.com
You are looking for ways to add style and design to wall surfaces, think about enhancing with wall wine racks. When placed on a wall beside a bar, in a dining room, in a cooking area, or yet another picked location, a wall wine rack can make a very outstanding and eye-grabbing show. The choices for wall wine racks teem, and they are readily available in a wide variety of dimensions and layouts.Visit our site inwallcabinets.com/wooden-wine-rack-cabinets.html for more information on Wine Rack