View allAll Photos Tagged microcontroller
Die shot of a Mitsubishi M30624FGAFP 16 bit microcontroller. This one was used as a general purpose controller in a 3-LCD projection tv, presumably to offload general functions from the main soc and video processing chipset. This particular die has a darker passivation layer which creates some interesting effects. This chip contains 256kb of ROM and 20kb of RAM. Initially this chip failed the decap due to a stuck chunk of epoxy so I resorted to boiling the chip in pine gum rosin.
Datasheet: www.alldatasheet.com/datasheet-pdf/pdf/711/MITSUBISHI/M30...
Turned a Rubbermaid food storage container into a case to carry my Arduino in my bag on my bicycle.
For Bread Bike Blog
The Universal Development Board (UDB) is a microcontroller development board intended for use with a wide variety of PIC microcontrollers from Microchip®. It was designed to support most 3.3V, PIC microcontrollers in 8-bit, 16-bit, or 32-bit varieties. It will accommodate a wide range of Microchip PIM processor modules as well as DIP packaged parts with pin counts from 8-pin to 28-pin. Three DIP sockets are provided: 20/14/8 PIN 8-bit PIC, 28 PIN 8-bit PIC, and 28-pin PIC24/dsPIC33/PIC32MX. This board also has discrete I/O elements and two Pmod connectors for further device evaluation or product development capability. Expansion connectors are provided that are compatible with the Microchip PICtail™ Plus line of expansion modules. In addition to the PIM connector and DIP sockets, a PIC32MX360 microcontroller is also provided for use without the need for additional PIM or DIP socketed processors.
store.digilentinc.com/universal-development-board-for-mic...
The IR Range Sensor is a great way to add range detection to robotic projects that use Cerebotâ„¢ boards. The sensor detects reflective objects 10 to 80 cm away.
The sensor connects to the ADC found on all Cerebot boards. The cable maps the output pins to a 3-pin connector. The yellow wire is for the analog output signal. The pin should be connected to the analog-to-digital converter (ADC) on your microcontroller. The red wire is the Vcc power supply to the sensor and is diode-protected against reverse polarization. The black wire should be connected to the ground of the ADC.
Connections for 24 volt AC/DC adapter power supply to power the solenoid valve; 9 volt adapter to power both the Basic Stamp II microcontroller and the HiViz Multi-Trigger circuit boards; and DB9 serial port connector for programming the Basic Stamp microcontroller, which uses a serial-to-USB converter from Parallax.com.
Pixel VGA, version 1 (Floor Cluster) - Garnet Hertz
Two dozen old computer monitors occupy the center of a gallery floor in a cluster facing the wall. Each screen is controlled with custom electronics to create pulsating and strobing patterns, casting a colored wash across the darkened gallery.
Dimensions: Variable (approx 3m x 3m). VGA monitors, custom electronics. 2011.
More project information: conceptlab.com/pixel/
The RADCASTle is monophonic synthesizer using analog sound-generating circuitry driven by a microcontroller. This was a ECE4007 Senior Design Project at Georgia Tech in the Fall 2008 semester. The team members were Robert Estelle, Logan Snow, Hoan To, and Greg Hartl.
The analog boards were purchased from Ray Wilson of Music From Outer Space. The team developed customer to interface the various analog synth boards with a PIC microcontroller through digital-to-analog converters.
The Digilent Motor Robot Kit (MRK) provides the perfect starting point for those new to robotics, but has the power to be used for advanced designs and applications as well. The MRK pairs our powerful chipKITâ„¢ Pro MX4 microcontroller development board with a rugged steel platform and all the motors, wheels, and other parts needed to build a complete robot. Using your MRK's powerful chipKIT Pro MX4, you'll be able to add all sorts of functionality to your robot. Add some of our extensive line of peripheral modules (Pmods) and you can design almost anything!
store.digilentinc.com/mrk-basic-motor-robot-parts-kit-inc...
The IR Range Sensor is a great way to add range detection to robotic projects that use Cerebotâ„¢ boards. The sensor detects reflective objects 10 to 80 cm away.
The sensor connects to the ADC found on all Cerebot boards. The cable maps the output pins to a 3-pin connector. The yellow wire is for the analog output signal. The pin should be connected to the analog-to-digital converter (ADC) on your microcontroller. The red wire is the Vcc power supply to the sensor and is diode-protected against reverse polarization. The black wire should be connected to the ground of the ADC.
For the first Mayke of 2026, I have made up a break-out board with the Atmel ATmega328PB microcontroller and some yellow 2.54mm headers. The ATmega328PB is an updated version of the Arduino MCU, with a few extra features such as two UARTs and additional GPIO pins.
Microchip honored Mike Nicholson, Engineering Manager from Price Electronics in Winnipeg, Canada, as the recipient of its one millionth tool.
The 5V 4000mA switching power supply comes with US and EU plug adapters and is for use with Digilent FPGA & Microcontroller boards.
Using an mbed.org microcontroller with a simple black and green LCD (which I soldered a pin strip to so I could affix to breadboard), this is a simple demo of how you can run 16 character scrolling text.
Pixel VGA, version 1 (Floor Cluster) - Garnet Hertz
Two dozen old computer monitors occupy the center of a gallery floor in a cluster facing the wall. Each screen is controlled with custom electronics to create pulsating and strobing patterns, casting a colored wash across the darkened gallery.
Dimensions: Variable (approx 3m x 3m). VGA monitors, custom electronics. 2011.
More project information: conceptlab.com/pixel/