+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The CAC Sabre, sometimes known as the Avon Sabre or CA-27, was an Australian variant of the North American Aviation F-86F Sabre fighter aircraft. In 1951, Commonwealth Aircraft Corporation obtained a license agreement to build the F-86F Sabre. In a major departure from the North American blueprint, it was decided that the CA-27 would be powered by a license-built version of the Rolls-Royce Avon R.A.7, rather than the General Electric J47. In theory, the Avon was capable of more than double the maximum thrust and double the thrust-to-weight ratio of the US engine. This necessitated a re-design of the fuselage, as the Avon was shorter, wider and lighter than the J47.

The CAC 27 Mk 41s’ last carrier operations took place in 1981 in the course of Melbourne’s involvements in two major exercises, Sea Hawk and Kangaroo 81, the ship’s final missions at sea. After Melbourne was decommissioned in 1984, the Fleet Air Arm ceased fixed-wing combat aircraft operation. This was the operational end of the Sabre Mk 41, which had reached the end of their airframe lifetime, and the Sea Sabre fleet had, during its career, severely suffered from accidents and losses: upon retirement, only eight of the original twenty-two aircraft still existed in flightworthy condition, so that the aircraft were all scrapped. The younger RAN A-4Gs were eventually sold to New Zealand, where they were kept in service until 2002.

General characteristics:

Crew: 1

Length: 37 ft 6 in (11.43 m)

Wingspan: 37 ft 1 in (11.3 m)

Height: 14 ft 5 in (4.39 m)

Wing area: 302.3 sq ft (28.1 m²)

Empty weight: 12,000 lb (5,443 kg)

Loaded weight: 16,000 lb (7,256 kg)

Max. takeoff weight: 21,210 lb (9,621 kg)

Powerplant:

1× Rolls-Royce Avon 208A turbojet engine with 8,200 lbf (36.44 kN)

Performance:

Maximum speed: 700 mph (1,100 km/h) (605 knots)

Range: 1,153 mi, (1,000 NM, 1,850 km)

Service ceiling: 52,000 ft (15,850 m)

Rate of climb: 12,000 ft/min at sea level (61 m/s)

Armament:

2× 30 mm ADEN cannons with 150 rounds per gun

5,300 lb (2,400 kg) of payload on six external hardpoints;

Bombs were usually mounted on outer two pylons as the mid pair were wet-plumbed pylons for

2× 200 gallons drop tanks, while the inner pair was usually occupied by a pair of AIM-9 Sidewinder

AAMs

A wide variety of bombs could be carried with maximum standard loadout being 2x 1,000 lb bombs

or 2x Matra pods with unguided SURA missiles plus 2 drop tanks for ground attacks, or 2x AIM-9 plus

two drop tanks as day fighter

The kit and its assembly:

This project was initially inspired by a set of decals from an ESCI A-4G which I had bought in a lot – I wondered if I could use it for a submission to the “In the navy” group build at whatifmodelers.com in early 2020. I considered an FJ-3M in Australian colors on this basis and had stashed away a Sword kit of that aircraft for this purpose. However, I had already built an FJ variant for the GB (a kitbashed mix of an F-86D and an FJ-4B in USMC colors), and was reluctant to add another Fury.

This spontaneously changed after (thanks to Corona virus quarantine…) I cleaned up one of my kit hoards and found a conversion set for a 1:72 CAC 27 from JAYS Model Kits which I had bought eons ago without a concrete plan. That was the eventual trigger to spin the RAN Fury idea further – why not a navalized version of the Avon Sabre for HMAS Melbourne?

The result is either another kitbash or a highly modified FJ-3M from Sword. The JAYS Model Kits set comes with a THICK sprue that carries two fuselage halves and an air intake, and it also offers a vacu canopy as a thin fallback option because the set is actually intended to be used together with a Hobby Craft F-86F.

While the parts, molded in a somewhat waxy and brittle styrene, look crude on the massive sprue, the fuselage halves come with very fine recessed engravings. And once you have cleaned the parts (NOTHING for people faint at heart, a mini drill with a saw blade is highly recommended), their fit is surprisingly good. The air intake was so exact that no putty was needed to blend it with the rest of the fuselage.

The rest came from the Sword kit and integrating the parts into the CAC 27 fuselage went more smoothly than expected. For instance, the FJ-3M comes with a nice cockpit tub that also holds a full air intake duct. Thanks to the slightly wider fuselage of the CAC 27, it could be mounted into the new fuselage halves without problems and the intake duct almost perfectly matches the intake frame from the conversion set. The tailpipe could be easily integrated without any mods, too. The fins had to be glued directly to the fuselage – but this is the way how the Sword kit is actually constructed! Even the FJ-3M’s wings match the different fuselage perfectly. The only modifications I had to make is a slight enlargement of the ventral wing opening at the front and at the read in order to take the deeper wing element from the Sword kit, but that was an easy task. Once in place, the parts blend almost perfectly into each other, just minor PSR was necessary to hide the seams!

Other mods include an extended front wheel well for the longer leg from the FJ-3M and a scratched arrester hook installation, made from wire, which is on purpose different from the Y-shaped hook of the Furies.

For the canopy I relied on the vacu piece that came with the JAYS set. Fitting it was not easy, though, it took some PSR to blend the windscreen into the rest of the fuselage. Not perfect, but O.K. for such a solution from a conversion set.

The underwing pylons were taken from the Sword kit, including the early Sidewinders. I just replaced the drop tanks – the OOB tanks are very wide, and even though they might be authentic for the FJ-3, I was skeptical if they fit at all under the wings with the landing gear extended? In order to avoid trouble and for a more modern look, I replaced them outright with more slender tanks, which were to mimic A-4 tanks (USN FJ-4s frequently carried Skyhawk tanks). They actually come from a Revell F-16 kit, with modified fins. The refueling probe comes from the Sword kit.

A last word about the Sword kit: much light, but also much shadow. While I appreciate the fine surface engravings, the recognizably cambered wings, a detailed cockpit with a two-piece resin seat and a pretty landing gear as well as the long air intake, I wonder why the creators totally failed to provide ANY detail of the arrester hook (there is literally nothing, as if this was a land-based Sabre variant!?) or went for doubtful solutions like a front landing gear that consists of five(!) single, tiny parts? Sadism? The resin seat was also broken (despite being packed in a seperate bag), and it did not fit into the cockpit tub at all. Meh!

Painting and markings:

From the start I planned to give the model the late RAN A-4Gs’ unique air superiority paint scheme, which was AFAIK introduced in the late Seventies: a two-tone wraparound scheme consisting of “Light Admiralty Grey” (BS381C 697) and “Aircraft Grey” (BS 381C 693). Quite simple, but finding suitable paints was not an easy task, and I based my choice on pictures of the real aircraft (esp. from "buzz" number 880 at the Fleet Air Arm Museum, you find pics of it with very good light condition) rather than rely on (pretty doubtful if not contradictive) recommendations in various painting instructions from models or decal sets.

I wanted to keep things simple and settled upon Dark Gull Grey (FS 36231) and Light Blue (FS 35414), both enamel colors from Modelmaster, since both are rather dull interpretations of these tones. Esp. the Light Blue comes quite close to Light Admiralty Grey, even though it should be lighter for more contrast to the darker grey tone. But it has that subtle greenish touch of the original BS tone, and I did not want to mix the colors.

The pattern was adapted from the late A-4Gs’ scheme, and the colors were dulled down even more through a light black ink wash. Some post-shading with lighter tones emphasized the contrast between the two colors again. And while it is not an exact representation of the unique RAN air superiority scheme, I think that the overall impression is there.

The cockpit interior was painted in very dark grey, while the landing gear, its wells and the inside of the air intake became white. A red rim was painted around the front opening, and the landing gear covers received a red outline, too. The white drop tanks are a detail I took from real world RAN A-4Gs - in the early days of the air superiority scheme, the tanks were frequently still finished in the old USN style livery, hence the white body but fins and tail section already in the updated colors.

The decals became a fight, though. As mentioned above, the came from an ESCI kit – and, as expected, the were brittle. All decals with a clear carrier film disintegrated while soaking in water, only those with a fully printed carrier film were more or less usable. One roundel broke and had to be repaired, and the checkered fin flash was a very delicate affair that broke several times, even though I tried to save and repair it with paint. But you can unfortunately see the damage.

Most stencils and some replacements (e. g. the “Navy” tag) come from the Sword FJ-3. While these decals are crisply printed, their carrier film is utterly thin, so thin that applying esp. the larger decals turned out to be hazardous and complicated. Another point that did not really convince me about the Sword kit.

Finally, the kit was sealed with matt acrylic varnish (Italeri) and some soot stains were added around the exhaust and the gun ports with graphite.

In the end, this build looks, despite the troubles and the rather exotic ingredients like a relatively simple Sabre with Australian markings, just with a different Navy livery. You neither immediately recognize the FJ-3 behind it, nor the Avon Sabre’s bigger fuselage, unless you take a close and probably educated look. Very subtle, though.

The RAN air superiority scheme from the late Skyhawks suits the Sabre/Fury-thing well – I like the fact that it is a modern fighter scheme, but, thanks to the tones and the colorful other markings, not as dull and boring like many others, e. g. the contemporary USN "Ghost" scheme. Made me wonder about an early RAAF F-18 in this livery - should look very pretty, too?

Some background:

A vanship is a type of flying machine from the animated series Last Exile. It is often referred to as a "flying boat" in that it does not fly by means of aerodynamics like planes do, but rather by floating on the air and propelling itself through the use of a substance known as "Claudia" (see below).

All vanships in the series were rendered as 3D images, a hallmark of Japanese animation studio Gonzo, makers of such series as Vandread and Blue Submarine No. 6.

The kit and its assembly:

I love the Vanships from Last Exile - even though I have never seen the series.

While these vehicles appear as retro stuff, they are very original and unique in look and feel - a modeler's dream if you are into scratchbuilding and kitbashing. There's also a 1:72 Vanship kit available (actually, in two versions) from Hasegawa, but it is IMHO overpriced. And there are so many different Vanships in the series that it is a shame that not more of them have been kitted, scratched, or at least used as a source of modelling inspiration.

The latter's the case here. I had a scratched Vanship on the agenda for a long time and also a basic idea with what I'd start, but it took a SF racing GB at phoxim.de ( a German SF model building forum) to make a move.

I wanted a small and fast single seater, and this evolved through the GB into a Racer with a more prominent engine unit and a rather purposeful livery instead of bright colors. But the basic concept was retained: originally, the plan was to use a 1:72 F4U as fuselage basis, and I had the idea to integrate some parts of a 1:43 Citroen 11CV from Heller, e. g. its grill and bonnet.

The F4U is the SMER kit, and it has the benefit of having separate wings for a folded display. The fin was cut off and the landing gear wells covered.

The cockpit opening was slightly enlarged in order to take a 1:48 Japanese WWII resin pilot and a seat from the 1:43 11CV - pretty cramped, but it worked and looks good. Only the wind screen of the OOB F4U canopy was used, as well as the original dashboard.

Most work was done on the outside, though. The first problem turned up when I realized that the 11CV bonnet could hardly be mated with the F4U. As a plan B I found a cover for the brush head of a Philipps electric toothbrush in my donor bank - a bit too high and narrow, but overall a unique addition and characteristic nose for my creation!

The landing gear comes from an Amodel Ju-87A - together with the drooped F4U inner wings the result looked a bit stalky at first, but the Vanship still needed its engines.

As a racer, I went for double power, and the long pods that carry the propulsion system were scratched from several non-model-kit parts:

- Front comes from a Revell 1:32 AH-64 Apache, its engines

- The intakes come from a Matchbox Gloster Meteor NF.14

- The "ring" consists of wheel parts from the Heller 11CV

- The conic isolators are ball pen grips, cut to size and closed with tank wheels on both ends

- The fins are plastic knives, primarily the blades and parts of the handles

In between these engine pods, which are only held under the wings and stabilized internally through steel wire, a generator pod from a 1:72 Matchbox EA-6B fills the void. It also holds a characteristic "knife" under the front grill - again carved from the handle of the plastic knives.

In order to blend the changes in fuselage shape and diameter and create a kind of Cord-style grill I added three styrene strips which were wrapped around the nose, the upper line reaching back to the cockpit - a kind of 3D rally stripe that also streches the shape.

Some air scoops and surface details were added, made from styrene, and stiff cable was used under the front fuselage to create hoses between the bonnet with the Claudia reactor and the engines.

I was frequently tempted to add more things and details or decoration, but found that a rather clean look would better suit a dedicated racer Vanship - the Stutz Blackhawk land speed record car was a vague benchmark.

Painting and markings:

I wanted to keep things simple and dry. Before this turned into a racer I considered several colors like pale blue, a greyish-green, British Racing Green or Crimson, with ivory trim. Anyway, I rejected this in favir of a pure, bare metal finish. I even did not add colorful stripes - the only "color" comes from the mechanical parts (ivory and dark brown on the engine pods, the idea was to add an isolator impression) and the small sponsor decals.

The kit initially received a basic coat of Revell's acrylic Aluminum, and onto that panels/field with several Metallizer tones (Steel, Magnesium, Titanium, polished Aluminum) were added. On top of that, the whole thing received a rubbing with grinded graphite - intensifying the metal shine and also weathering the vehicle.

The pilot received a rather conservatie outfit, with a brown leather jacket - matching the overall style of the Vanship. Some engine parts (e. g. the blades and the knife under the nose) were painted with a mix of Steel Metallizer and Gold. The cockpit interior was painted in RLM 02.

The markings were puzzled together. The start number '24' in that nice retro type comes from an 1:72 Airfix Il-2, the black disc below is from a slot car aftermarket sheet. The many sponsor stickers come mostly from an 1:72 Su-27 demonstrator aircraft sheet from Begemot - with their cyrillic typo they blend well into the Last Exile look and feel (where Greek/Cyrillic typo pops up).

Finally, the kit received a coat with acrylic gloss varnish, while the anti glare panel in front of the windscreen became matt.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Northrop Grumman-IAI F-24 is the latest reincarnation of the USAF "Lightweight Fighter Program" which dates back to the 1950ies and started with the development of Northrop's F-5 "Freedom Fighter".

International interest for the F-24A is already there: in late 2013 Grumman stated that initial talks have been made with various countries, and potential export candidates from 2015 on are Taiwan, Singapore, Thailand, Finland, Norway, Australia and Japan.

General F-24A characteristics:

Crew: 1 pilot

Length: 47 ft 4 in (14.4 m)

Wingspan: 27 ft 11.9 in / 8.53 m; with wingtip missiles (26 ft 8 in/ 8.13 m; without wingtip missiles)

Height: 13 ft 10 in (4.20 m)

Wing area: 36.55 m² (392 ft²)

Empty weight: 13.150 lb (5.090 kg)

Loaded weight: 15.480 lb (6.830 kg)

Max. take-off weight: 27.530 lb (12.500 kg)

Powerplant:

1× General Electric F404-GE-402 turbofan with a dry thrust of 11,000 lbf (48.9 kN) and 17,750 lbf (79.2 kN) with afterburner

Performance

Maximum speed: Mach 2+

Combat radius: 300 nmi (345 mi, 556 km); for hi-lo-hi mission with 2 × 330 US gal (1,250 L) drop tanks

Ferry range: 1,490 nmi (1715 mi, 2759 km); with 3 × 330 US gal (1,250 L) drop tanks

Service ceiling: 55,000 ft (16,800 m)

Rate of climb: 52,800 ft/min (255 m/s)

Wing loading: 70.0 lb/ft² (342 kg/m²)

Thrust/weight: 1.09 (1.35 with loaded weight & 50% fuel)

Armament

1× 20 mm (0.787 in) M199A1 3-barreled Gatling cannon in the lower fuselage with 400 RPG

Eleven external hardpoints (two wingtip tails, six underwing hardpoints, three underfuselage hardpoints) and a total capacity of 11.000 lb (4.994 kg) of missiles (incl. AIM 9 Sidewinder and AIM 120 AMRAAM), bombs, rockets, ECM pods and drop tanks for extended range.

The kit and its assembly:

A spontaneous project. This major kitbash was inspired by fellow user nighthunter at whatifmodelers.com, who came up with a profile of a mashed-up US fighter, created “out of boredom”. The original idea was called F-21C, and it was to be a domestic successor to the IAI Kfirs which had been used by the US as aggressor aircraft in USN and USMC service for a few years.

As a weird(?) coincidence I had many of the necessary ingredients for this fictional aircraft in store, even though some parts and details were later changed. This model here is an interpretation of the original design. The idea was spun further, and the available parts that finally went into the model also had some influence on design and background.

I thank nighthunter for sharing the early ideas, inviting me to take the design to the hardware stage (sort of…) and adapting my feedback into new design sketches, too, which, in return, inspired the model building process.

Well, what went into this thing? To cook up a F-24 à la Dizzyfugu you just need (all in 1:72):

● Fuselage from a Hasegawa X-29, including the cockpit and the landing gear

● Fin and nose cone from an Italeri F-16A

● Inner wings from a (vintage) Hasegawa MiG-21F

● Outer wings from a F-4 (probably a J, Hasegawa or Fujimi)

The wing construction deviates from nighthunter’s original idea. The favorite ingredients would have been F-16XL or simple Mirage III wings, but I found the composite wing to be more attractive and “different”. The big F-16XL wings, despite their benefit of a unique shape, might also have created scale/size problems with a F-20 style fuselage? So I built hybrid wings: The MiG-21 landing gear wells were filled with putty and the F-4 outer wings simply glued onto the MiG inner wing sections, which were simply cut down in span. It sounds like an unlikely combo, but these parts fit together almost perfectly! In order to hide the F-4 origins I modified them to carry wingtip launch rails, though, which were also part of nighthunter’s original design.

The AAW technology detail mentioned in the background came in handy as it explains the complicated wing shape and the fact that the landing gear retracts into the fuselage, not into the wings, which would have been more plausible… Anyway, there’s still room for a simpler export version, with Mirage III or Kfir C.2/7 wings, and maybe canards?

Using the X-29 as basis also made fitting the new wings onto the area-ruled fuselage pretty easy, as I could use the wing root parts from the X-29 to bridge the gap. The original, forward-swept wings were just cut away, and the remains used as consoles for the new hybrid delta wings. Took some SERIOUS putty work, but the result is IMHO fine.

The bigger/square X-29 air intakes were taken over, and they change the look of the aircraft, making it look less F-5-ish than a true F-20 fuselage. For the same reason I kept the large fairing at the fin base, combining it with a bigger F-16 tail, though, as a counter-balance to the new, bigger wings. Again, the F-16 fin was/is part of nighthunter’s idea, so the model stays true to the original concept.

For the same reason I omitted the original X-29 nose, which is rather pointy, sports vanes and a large sensor boom. The F-16 nose was a plausible choice, as the AN/APG-80 is also carried by late Fighting Falcons, and its shape fits well, too.

All around the hull, some small details like radar warning sensors, pitots and air scoops were added. Not really necessary, but such thing add IMHO to the overall impression of such a fictional aircraft beyond the prototype stage.

Cockpit and landing gear were taken OOB, I just added a pilot figure and slightly modified the seat.

The ordnance was puzzled together from the scrap box, the AIM-9Ls come from the same F-4 kit which donated its outer wings, the AIM-120s come from an Italeri NATO weapons kit. The drop tanks belong to an F-16.

Painting and markings:

At first I considered an F-24I in IAF markings, or even a Japanese aircraft, but then reverted to one of nighthunter’s initial, simple ideas: an USAF aircraft in the “Hill II” paint scheme (F-16 style), made up from three shades of gray (FS 36118, 36270 and 36375) with low-viz markings and stencils. Dutch/Turkish NF-5A/Bs in the “Hill II” scheme were used as design benchmarks, too. It’s a simple livery, but on this delta wing aircraft it looks pretty interesting. I used enamels, what I had at hand: Humbrol 127 and 126, and Modelmaster's 1723.

A light black ink wash was applied, in order to em,phasize the engraved panel lines, in contrast to that, panels were manually highlighted through dry-brushed, lighter shades of gray (Humbrol 27, 166 and 167).

“Hill II” also adds to a generic, realistic touch for this whif. Doing an exotic air force thing is rather easy, but creating a convincing whif for a huge military machinery like the USAF’s takes more subtlety, I think.

The cockpit was painted in medium Gray (Dark Gull Grey, FS 36231, Humbrol 140), as well as the radome. The landing gear and the air intakes were painted white. The radome was painted with Revell 47 and dry-brushed with Humbrol 140.

Decals were puzzled together from various USAF aircraft, including sheets from an Airfix F-117, an Italeri F-15E and even an Academy OV-10D.

Tadah: a hardware tribute to an idea, born from boredom - and the aircraft does not look even bad at all? What I wanted to achieve was to make the F-24 neither look like a F-20, nor a Saab Gripen clone, as the latter comes close in overall shape, size and design.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some Background:

During the 1950s, Hindustan Aircraft Limited (HAL) had developed and produced several types of trainer aircraft, such as the HAL HT-2. However, elements within the firm were eager to expand into the then-new realm of supersonic fighter aircraft. Around the same time, the Indian government was in the process of formulating a new Air Staff Requirement for a Mach 2-capable combat aircraft to equip the Indian Air Force (IAF). However, as HAL lacked the necessary experience in both developing and manufacturing frontline combat fighters, it was clear that external guidance would be invaluable; this assistance was embodied by Kurt Tank.

A radar upgrade, together with the introduction of better air-to-ai missiles with a higher range and look down/shoot down capability was considered but never carried out. Furthermore, the idea of a true HF-26 2nd generation variant, powered by a pair of Tumansky R-11F-300 afterburner jet engines (from the license-built MiG-21FLs), was dropped, too – even though this powerplant eventually promised to fulfill the Teer’s design promise of Mach 2 top speed. A total of only 82 HF-26s (including thirteen two-seat trainers with a lengthened fuselage and reduced fuel capacity, plus eight prototypes) were built. The last aircraft were retired from IAF service in 1988 and replaced with Mirage 2000 fighters procured from France that were armed with the Matra Super 530 AAM.

General characteristics:

Crew: 1

Length: 14.97 m (49 ft ½ in)

Wingspan: 9.43 m (30 ft 11 in)

Height: 4.03 m (13 ft 2½ in)

Wing area: 30.6 m² (285 sq ft)

Empty weight: 7,000 kg (15,432 lb)

Gross weight: 10,954 kg (24,149 lb) with full internal fuel

Max takeoff weight: 15,700 kg (34,613 lb) with external stores

Powerplant:

2× Tumansky RD-9 afterburning turbojet engines; 29 kN (6,600 lbf) dry thrust each

and 36.78 kN (8,270 lbf) with afterburner

Performance:

Maximum speed: 1,700 km/h (1,056 mph; 917 kn; Mach 1.6) at 11,000 m (36,000 ft)

1,350 km/h (840 mph, 730 kn; Mach 1.1) at sea level

Combat range: 725 km (450 mi, 391 nmi) with internal fuel only

Ferry range: 1,700 km (1,100 mi, 920 nmi) with four drop tanks

Service ceiling: 18,100 m (59,400 ft)

g limits: +6.5

Time to altitude: 9,145 m (30,003 ft) in 1 minute 30 seconds

Wing loading: 555 kg/m² (114 lb/sq ft)

Armament

6× hardpoints (four underwing and two under the fuselage) for a total of 2.500 kg (5.500 lb);

Typical interceptor payload:

- two IR-guided R-3 or R-60 air-to-air-missiles or

two PTB-490 drop tanks on the outer underwing stations

- two semi-active radar-guided ‚Saanp’ air-to-air missiles or two more R-3 or R-60 AAMs

on inner underwing stations

- two 500 l drop tanks or two gun pods with a 23 mm GSh-23L autocannon and 200 RPG

each under the fuselage

The kit and its assembly:

This whiffy delta-wing fighter was inspired when I recently sliced up a PM Model Su-15 kit for my side-by-side-engine BAC Lightning build. At an early stage of the conversion, I held the Su-15 fuselage with its molded delta wings in my hand and wondered if a shortened tail section (as well as a shorter overall fuselage to keep proportions balanced) could make a delta-wing jet fighter from the Flagon base? Only a hardware experiment could yield an answer, and since the Su-15’s overall outlines look a bit retro I settled at an early stage on India as potential designer and operator, as “the thing the HF-24 Marut never was”.

True to the initial idea, work started on the tail, and I chopped off the fuselage behind the wings’ trailing edge. Some PSR was necessary to blend the separate exhaust section into the fuselage, which had to be reduced in depth through wedges that I cut out under the wings trailing edge, plus some good amount of glue and sheer force the bend the section a bit upwards. The PM Model's jet exhausts were drilled open, and I added afterburner dummies inside - anything would look better than the bleak vertical walls inside after only 2-3 mm! The original fin was omitted, because it was a bit too large for the new, smaller aircraft and its shape reminded a lot of the Suchoj heavy fighter family. It was replaced with a Mirage III/V fin, left over from a (crappy!) Pioneer 2 IAI Nesher kit.

Once the rear section was complete, I had to adjust the front end - and here the kitbashing started. First, I chopped off the cockpit section in front of the molded air intake - the Su-15’s long radome and the cockpit on top of the fuselage did not work anymore. As a remedy I remembered another Su-15 conversion I did a (long) while ago: I created a model of a planned ground attack derivative, the T-58Sh, and, as a part of the extensive body work, I transplanted the slanted nose from an academy MiG-27 between the air intakes – a stunt that was relatively easy and which appreciably lowered the cockpit position. For the HF-26M I did something similar, I just transplanted a cockpit from a Hasegawa/Academy MiG-23 with its ogival radome that size-wise better matched with the rest of the leftover Su-15 airframe.

The MiG-23 cockpit matched perfectly with the Su-15's front end, just the spinal area behind the cockpit had to be raised/re-sculpted to blend the parts smoothly together. For a different look from the Su-15 ancestry I also transplanted the front sections of the MiG-23 air intakes with their shorter ramps. Some mods had to be made to the Su-15 intake stubs, but the MiG-23 intakes were an almost perfect fit in size and shape and easy to integrate into the modified front hill. The result looks very natural!

However, when the fuselage was complete, I found that the nose appeared to be a bit too long, leaving the whole new hull with the wings somewhat off balance. As a remedy I decided at a rather late stage to shorten the nose and took out a 6 mm section in front of the cockpit - a stunt I had not planned, but sometimes you can judge things only after certain work stages. Some serious PSR was necessary to re-adjust the conical nose shape, which now looked more Mirage III-ish than planned!

The cockpit was taken mostly OOB, I just replaced the ejection seat and gave it a trigger handle made from thin wire. With the basic airframe complete it was time for details. The PM Model Su-15s massive and rather crude main landing gear was replaced with something more delicate from the scrap box, even though I retained the main wheels. The front landing gear was taken wholesale from the MiG-23, but had to be shortened for a proper stance.

A display holder adapter was integrated into the belly for the flight scenes, hidden well between the ventral ordnance.

The hardpoints, including missile launch rails, came from the MiG-23; the pylons had to be adjusted to match the Su-15's wing profile shape, the Anab missiles lost their tail sections to create the fictional Indian 'Saanp' AAMs. The R-3s on the outer stations were left over from a MP MiG-21. The ventral pylons belong to Academy MiG-23/27s, one came from the donor kit, the other was found in the spares box. The PTB-490 drop tanks also came from a KP MiG-21 (or one of its many reincarnations, not certain).

Painting and markings:

The paint scheme for this fictional aircraft was largely inspired by a picture of a whiffy and very attractive Saab 37 Viggen (an 1:72 Airfix kit) in IAF colors, apparently a model from a contest. BTW, India actually considered buying the Viggen for its Air Force!

IAF aircraft were and are known for their exotic and sometimes gawdy paint schemes, and with IAF MiG-21 “C 992” there’s even a very popular (yet obscure) aircraft that sported literal tiger stripes. The IAF Viggen model was surely inspired by this real aircraft, and I adopted something similar for my HF-26M.

IAF 1 Squadron was therefore settled, and for the paint scheme I opted for a "stripish" scheme, but not as "tigeresque" as "C 992". I found a suitable benchmark in a recent Libyian MiG-21, which carried a very disruptive two-tone grey scheme. I adapted this pattern to the HA-26M airframe and replaced its colors, similar to the IAF Viggen model, which became a greenish sand tone (a mix of Humbrol 121 with some 159; I later found out that I could have used Humbrol 83 from the beginning, though...) and a very dark olive drab (Humbrol 66, which looks like a dull dark brown in contrast with the sand tone), with bluish grey (Humbrol 247) undersides. With the large delta wings, this turned out to look very good and even effective!

For that special "Indian touch" I gave the aircraft a high-contrast fin in a design that I had seen on a real camouflaged IAF MiG-21bis: an overall dark green base with a broad, red vertical stripe which was also the shield for the fin flash and the aircraft's tactical code (on the original bare metal). The fin was first painted in green (Humbrol 2), the red stripe was created with orange-red decal sheet material. Similar material was also used to create the bare metal field for the tactical code, the yellow bars on the splitter plates and for the thin white canopy sealing.

After basic painting was done the model received an overall black ink washing, post-panel shading and extensive dry-brushing with aluminum and iron for a rather worn look.

The missiles became classic white, while the drop tanks, as a contrast to the camouflaged belly, were left in bare metal.

Decals/markings came primarily from a Begemot MiG-25 kit, the tactical codes on the fin and under the wings originally belong to an RAF post-WWII Spitfire, just the first serial letter was omitted. Stencils are few and they came from various sources. A compromise is the unit badge on the fin: I needed a tiger motif, and the only suitable option I found was the tiger head emblem on a white disc from RAF No. 74 Squadron, from the Matchbox BAC Lightning F.6&F.2A kit. It fits stylistically well, though. ;-)

Finally, the model was sealed with matt acrylic varnish (except for the black radome, which became a bit glossy) and finally assembled.

A spontaneous build, and the last one that I completed in 2022. However, despite a vague design plan the model evolved as it grew. Bashing the primitive PM Model Su-15 with the Academy MiG-23 parts was easier than expected, though, and the resulting fictional aircraft looks sturdy but quite believable - even though it appears to me like the unexpected child of a Mirage III/F-4 Phantom II intercourse, or like a juvenile CF-105 Arrow, just with mid-wings? Nevertheless, the disruptive paint scheme suits the delta wing fighter well, and the green/red fin is a striking contrast - it's a colorful model, but not garish.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Yakovlev Yak-38 (Russian: Яковлева Як-38; NATO reporting name: "Forger") was the Soviet Naval Aviation's first and only operational VTOL strike fighter aircraft, in addition to being its first operational carrier-based fixed-wing aircraft. It was developed specifically for and served almost exclusively on the Kiev-class aircraft carriers.

Officially, all Ukrainian Yak-138 were scrapped until 1994, even though rumor has it that one or two airframes had been sold behind the scenes to China. In Russia only five specimen had survived, and since the spares situation was doubtful none could be kept in flying condition. One Yak-138 was eventually handed over to the Ulyanovsk Aircraft Museum, while the rest was either mothballed or scrapped, too. Unfortunately, the sole museum exhibit was lost in 1995 in a fire accident.

General characteristics:

Crew: One

Length (incl. pitot): 15.84 m (51 ft 10 1/2 in)

Wingspan: 8,17 m (26 ft 9 in)

Height: 4.19 m (14 ft 3 in)

Wing area: 24.18 m² (260.27 ft²)

Empty weight: 7,385 kg (16,281 lb)

Max. takeoff weight: 11,300 kg (28,700 lb)

Powerplant:

1x Kuznetsov NK-32L-2 turbofan engine, rated at 137 kN (31,000 lbf)

Performance:

Maximum speed: 1,176 km/h (730 mph; 635 knots) at sea level

Combat radius: 230 mi (200 nmi, 370 km) lo-lo-lo with 4,400 lb (2,000 kg) payload

Ferry range: 2,129 mi (1,850 nmi, 3,425 km)

Endurance: 1 hr 30 min (combat air patrol – 115 mi (185 km) from base)

Service ceiling: 51,200 ft (15,600 m)

Time to climb to 40,000 ft (12,200 m): 2 min 23 s

Armament:

1x GSh-23L 23mm machine cannon with 250 RPG under the fuselage

5 hardpoints with a total external capacity of

- 3.000 kg (6,600 lb) for C/STOL operations and

- 2.000 kg (4.400 lb) in VTOL mode

Provisions to carry combinations of various types of unguided rockets (up to 240 mm), anti-ship

or air-to-surface Kh-23 (AS-7 Kerry) missiles (together with a Delta N guidance pod), R-60,

R-60M (AA-8 Aphid) or R-73 (AA-11 Archer) air-to-air missiles; tactical nuclear bombs, general

purpose bombs of up to 500 kg (1.100 lb) caliber, or incendiary ZB-500 napalm tanks or up to

three PTB-800 drop tanks under the fuselage and the inner pair of wing pylons

The kit and its assembly:

Sixth contribution to the “Soviet” Group Build at whatifmodelers.com in early 2017, on pretty short notice since the GB had been coming to its end. This totally fictional aircraft was inspired CG illustrations that had been roaming the WWW for some time: a hybrid between a Yak-38 (mostly the tail section), mated with an AV-8B Harrier II (cockpit, wings, landing gear). This did not look bad at all, yet a bit weird, with lift engines added in front of the fin. Certainly not conformal with a good CG balance – but I liked the idea of a single-engine Forger. And actually, OKB Yakovlev had been considering this.

So, the basic idea was a Harrier/Yak-38 kitbash. But the more I thought about the concept, the more additional donor parts came into play. One major addition was the nose section from a MiG-27 – with its slanted nose it would offer the pilot an excellent field of view, and the aircraft would, as a front line attack plane like the Harrier, not carry a radar, so the Flogger’s nose shape was perfect.

Therefore, initial ingredients for the Yak-138 were:

- Rear fuselage, wings and tail from a Tsukuda Hobby/Kangnam/Revell Yak-38

- Mid-fuselage with air intakes and front vectoring nozzles from a Matchbox Sea Harrier

- Cockpit from an Academy MiG-27

Work started with the MiG-27 cockpit, which was more or less taken OOB (except for side consoles in the cockpit and different seat), and the Yak-38 the tail section, built in parallel. To my surprise the Forger fuselage was easier to combine with the Harrier than expected, even though the position of the right cuts took multiple measurements until I came up with a proper solution. Since the Harrier is overall shorter than the Yak-38, the latter’s fuselage had to be shortened. I retained the tail cone, the Forger’s vectoring nozzles and the landing gear wells – and a 2cm plug was taken out between them. Instead of the Harrier’s tandem landing gear arrangement with outriggers under the outer wings, this one was to receive a conventional landing gear for optional C/STOL operations with a higher ordnance load, so that the Yak-38 parts were a welcome basis. Once the fuselage’s underside was more or less complete, the upper rest of the Yak-38 fuselage could be cut to size and integrated into the lower half and the Harrier parts.

After the rear end was settled, the MiG-27 cockpit could be mounted to the front end, which was slightly shortened by 2-3mm (since the Flogger’s is markedly longer than the short Harrier nose). In order to change the overall look of the aircraft, I eventually dropped the Harrier intakes and decided to use the Flogger’s boxy air intakes instead. These are considerably smaller than the gaping Harrier holes, and blending the conflicting shapes into each other for a more or less consistent look took several PSR turns. But it worked, better than expected, and it changes the aircraft’s look effectively, so that almost anything Harrier-esque was gone.

Once the fuselage was completed, I realized that I could not use the Yak-38 wings anymore. They are already pretty small, but with the more voluminous Harrier and Flogger parts added to the aircraft, they’d just be too small!

What to do...? I checked the donor bank and – in order to add even more individual flavor – used a pair of double delta wings from a PM Model Su-15! But only the core of them was left after considerable modifications: The inner delta wing sections were cut off, as well as the tip sections and parts of the trailing edge (for a planform similar to the Yak-38’s wings). On the underside, the landing gear openings were filled up and wing tips from the Yak-38, with puffer jet nozzles, transplanted. The inner leading edges had to be re-sculpted, too. The Su-15 wing fences were kept - a welcome, very Soviet design detail.

A lot of work, but I think it paid out because of the individual shape and look of these “new” wings?

As a consequence of the new, bigger wings, the little Yak-38 stabilizers could not be used anymore, either. In order to keep the square wing shape, I used modified stabilizers from an Intech F-16C/D – their trailing edges were clipped, but the bigger span retained. Together with the characteristic OOB Yak-38 fin they work well, and all of the aerodynamic surfaces IMHO blend well into the overall design of the aircraft.

After the hull was complete, work on smaller things could start. Under the fuselage, a GSh-23-2 pod from a MiG-21 was added, as well as pylons from the Tsukuda Yak-38 under the wings and a donor part from the scrap box in ventral position.

The landing gear is a mix, too: the main struts come from the Yak-38, the balloon wheels from the Matchbox Harrier. The front landing gear comes from the Academy MiG-27, including the wheels with mudguards. It was just mounted in a fashion that it now retracts forward.

The Harrier vectoring nozzles were modified, too, the exhaust “grills” replaced by square, simple ducts, scratched from styrene profile and putty. Care was taken that the nozzles would remain moveable in the fuselage flanks – for later hover pictures. The Yak-38’s nozzles were retained, but since they can OOB only be mounted in a single, fixed position, I added a simple pin to each nozzle, together with two holes in the hull, so that positions can now be switched between hover and level flight.

All around the hull, finally some small details like pitots, blade antennae and air scoops were finally added, and the ordnance consists of a pair of unguided 57mm rocket pods and a pair of Kh-23 (AS-7 Kerry) guided missiles – the latter come from the Yak-38 kit, but they are very crude and their tail sections were modified in order to come (slightly) closer to reality.

Painting and markings:

As an aircraft of the Soviet Frontal Aviation in the late Eighties, I settled upon a typical, disruptive four-tone camouflage with blue undersides. Very conventional, but with an exotic VTOL model I thought that a subtle look would be appropriate – and also separate it from the Naval Yak-38 cousin.

Design benchmark is the scheme on a contemporary MiG-21bis from a Soviert Frontal Aviation unit, chosen because of the disruptive pattern. The tones are guesstimates, though, based on various similar aircraft in more or less weathered condition. I settled for:

- Humbrol 195 (Dark Satin Green)

- Humbrol 78 (RAF Interior Green)

- Modelmaster 2005 (Burnt Umber)

- Humbrol 119 (Light Earth)

- Humbrol 115 (Russian Blue) for the undersides

The cockpit was painted in Russian Cockpit Green, opf course. The landing gear and their respective wells in a mix of Aluminum and Khaki Drab (Humbrol 56 & 26), and the wheel discs became bright green (Humbrol 131). Several di-electric panels and antennae were painted in Humbrol 106 (RAF Ocean Grey).

The kit received a thin black ink wash, in order to emphasize the panel lines, and panel post-shading with subtly lighter tones of the basic colors. National markings, codes and emblems come from several aftermarket sheets, mostly from High Decal Line and Begemot.

After some soot stains (grinded graphite) had been added, the kit was sealed with matt acrlyic varnish (Italeri) and the ordnace added.

Messy work, but I am surprised how consistent and normal the resulting aircraft appears? From certain angles, my Yak-138 creation reminds a good deal of the stillborn Hawker P.1154 (no similarity intended, though), the SEPECAT Jaguar or rather exotic Soko J-22 Orao/IAR-93 Vultur fighter bomber. IMHO, there’s also some A-4 Skyhawk style to it, esp. in planview? Anyway, there’s still some good Yak-38 heritage recognizable, and the tactical Frontal Aviation paint scheme suits the aircraft well - looks like a serious mud mover.

Phicen kitbash using the Little Red Riding Hood headsculpt . For the life of me I still can't find a proper Phicen body that matches this particular headsculpt ,this is the pale body and it still doesn't match , so frustrating >:(

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Republic P-47 Thunderbolt was one of the largest and heaviest fighter aircraft in history to be powered by a single piston engine. It was heavily armed with eight .50-caliber machine guns, four per wing. When fully loaded, the P-47 weighed up to eight tons, and in the fighter-bomber ground-attack roles could carry five-inch rockets or a significant bomb load of 2,500 pounds; it could carry over half the payload of the B-17 bomber on long-range missions (although the B-17 had a far greater range).

Twelve P-47H were lost in operational crashes with the 358th Group resulting in 11 deaths, two after VE Day, and two (44-21134 on 13 April 1945 and 44-21230 on 16 April 1945) were shot down in combat, both by ground fire.

General characteristics:

Crew: 1

Length: 39 ft 2 in (11.96 m)

Wingspan: 40 ft 9 in (12.42 m)

Height: 14 ft 8 in (4.47 m)

Wing area: 300 ft² (27.87 m²)

Empty weight: 10,000 lb (4,535 kg)

Loaded weight: 13,300 lb (6,032 kg)

Max. takeoff weight: 17,500 lb (7,938 kg)

Powerplant:

1× Chrysler XIV-2220-2 sixteen-cylinder inverted Vee liquid-cooled engine, rated at 2.450 hp.

Performance:

Maximum speed: 503 mph at 30,000 ft (810 km/h at 9,145 m)

Range: 920 mi combat, 2.175 ml ferry (1.480 km / 3.500 km)

Service ceiling: 43,000 ft (13,100 m)

Rate of climb: 3,120 ft/min (15.9 m/s)

Wing loading: 44.33 lb/ft² ()

Power/mass: 0.19 hp/lb (238 W/kg)

Armament:

8× .50 in (12.7 mm) M2 Browning machine guns (3.400 rounds)

Up to 2,500 lb (1,134 kg) of bombs, drop tanks and/or 10× 5 in (127 mm) unguided rockets

The kit and its assembly:

I had the (X)P-47H on the agenda for some time, and even the respective MPM kit stashed away. But it took some time to start this project - one reason actually being the, well, crudeness of the MPM offering. Anyway, I wanted to build a service aircraft, and I wondered how this would have looked like, way beyond 1944? That brought me towards the late bubble canopy versions of the P-47D - and suddenly the idea was born to convert the XP-47H into a respective service aircraft which would not only carry the Chrysler XIV-2220-1 V16 engine, but also other improvements of the type. This eventually led to the decision to make this build a kitbash, as a spine implantation would be the easiest way to incorporate the lowered back - or so I thought...

I chose the ancient Heller P-47(N) as donation kit. Not because it was “good”, it just had the right ingredients and was cheap and easy to procure. What sounded like a simple plan turned into a twisted route to vague success. I took the front fuselage and the lower belly from the MPM kit, as well as the horizontal stabilizers and mated it with the upper and rear fuselage of the Heller Thunderbolt. This could have been easy, if both kits would not have had different fuselage diameters - the Heller kit is about 1mm too narrow, even though the length is fine. In order to compensate, I built two new fuselage halves from the salvaged pieces, and once these were stable and more or less sanded even, put together. Inside, the cockpit was taken from the Heller kit, but the seat comes from the MPM kit, and a pilot figure was added. Another problem is the fact that the MPM kit features engraved panel lines, while the Heller kit has old school, raised details and lots of rivets.

The propeller from the MPM kit is a joke, so I built a replacement from scratch - from a drop tank front half from an ancient Revell F4U, and the individual propeller blades were taken from an Italeri F4U. Inside the fuselage, a styrene tube was implanted which holds the new propeller on a metal axis, so it can spin freely.

Other personal mods include lowered flaps and the large cooler intake was opened, with foamed styrene placed inside which mimics some mesh. The same method was also used inside of the intercooler outlets (primarily in order to block any light from shining through). Inside of the landing gear wells I added some structure made from styrene profiles.

Another bigger challenge was the wing attachment - Heller and MPM kit differ considerably in this aspect, so that swapping parts is not easy. The MPM kit has the wing roots molded onto the fuselage halves, while the Heller wings are, more or less, directly attached to the fuselage. As a consequence the Heller wings hold the complete landing gear wells, while the MPM solution has divided sections. I decided to get rid of the MPM wing roots, about 3mm of material, and onto these stubs the Heller wings were attached. The landing gear came from the Heller kit, but the main wheels come from a (new) Revell Me 262 - both MPM and Heller parts are not recommended for serious use... Finally, the many exhausts and cooler flaps were either sanded away and replaced by scratched parts, or added - e. g. the vents behind the cockpit. While the Heller kit features bomb and missile hardpoints under the wings I decided to leave them away - this is supposed to be a fast interceptor, not a train-hunting plough.

Painting and markings:

As this was to be a very late WWII aircraft, NMF was certain, and I wanted to place the service P-47H into the European conflict theatre, where its speed would IMHO be best used against German jet threats. I wanted a colorful aircraft, though, and settled for a machine of the 358th FG. This group actually flew Thunderbolts in the 365-367th Squadrons, and I found several profiles of these gaudy things.

Common to all of them was an orange tail and a dark blue back, while the engine cowling would be decorated with a red front and the air outlets would carry bands in red, white and blue, with lots of tiny stars sprinkled upon. Furthermore, I found specimen with white cowlings behind the red front end, or even yellow cowlings. Pretty cool.

I tried to mimic this look. The model was basically painted with Aluminum Metallizer (Humbrol 27002) overall. The effect is really good, even without rubbing treatment. Some panels were contrasted with Aluminium Plate and Polished Steel Metallizer (Modelmaster), as well as with Aluminum (Humbrol 56, which is rather a metallic grey). The latter was also used on the landing gear. The anti-glare panel in front of the cockpit was painted with Olive Drab (ANA 613 from Modelmaster).

Since there is no air intake opening on the inline engine I decided to paint the spinner in bright red (Humbrol 19), and tried to incorporate the white and blue theme with stars decoration to the rest of the nose. As a convenient coincidence, I found decals from an Italeri B-66 in the stash: it features a version with dark blue jet air intake decorations in the right size, colors and style for what I had been looking for. So, instead of painting everything by hand I decided to incorporate this decal option.

The area behind the spinner was painted white and then the B-66 decals applied to the front flanks. The radiator air intake scoop had to be cut out, but the overall size and shape were a very good match. Even the transition into the blue spine and cockpit area worked well!

The tail was painted with Humbrol 18, later some shading with Humbrol 82 was added. The blue spine was done with a mix of Humbrol 104 and 15 (Oxford Blue and Midnight Blue) - not a perfect match for the B-66 decal colors, but after some dirt and weathering these differences would blur.

Cockpit interior was painted in Humbrol 159 (Khaki Drab) and Zinc Chromate Green from Model Master. The landing gear wells received a chrome yellow primer (Humbrol 225 - actually RAF Mid Stone but a perfect match for the task) finish.

For weathering the kit received a rubbing treatment with grinded graphite, which adds a dark, metallic shine and emphasizes the kit’s raised panel lines. Some dry painting with Aluminum was added, too, simulating chipped paint on the leading edges. I also added some oil stains around the engine, and serious soot stains at the exhaust.

Decals were, beyond the B-66 decoration, puzzled together. The aircraft' code 'CH-F[bar]' is another exotic twist, in two ways. The bar under the letter marks a second use of that code within the squadron, and as a difference from normal code placement (normally exclusively on the fuselage) I placed the aircraft's individual code letter on the fin, a practice on some P-51s and a consequence of the relatively large letter decals.

The nose art is a fictional puzzle, consisting of a Czech MiG-21 pin-up from the Pardubice '89 meeting. The “Ohio Express” tag comes from a Tamiya 1:100 F-105 Thunderchief. A neat combination that even matches the overall colors well!

As a final step, a coat of semi matt acrylic varnish was applied, with the exception of the anti glare panel, which became purely matt.

A better XP-47H? Hard to tell, since this kitbashing was a messy and rather crude work, so the overall finish does not look as good as I hoped for. But the lowered spine and the fin root extension adds to a fast look of this thing, more elegant (if that's possible in this case?) than the Razorback prototypes. I can't help, but the finished article looks like an Evel Knievel stunt vehicle? The red spinner looks a bit odd, but I'll leave it this way.

How it came to be:

This model was initially inspired by a "what if" illustration of a Westland Wyvern in Russian markings (which looked disturbingly realistic...). I have always been fascinated by this brutal construction on the thin line between the prop and jet age, and building one had been a vague plan for a long time. But instead trying to get my hands on a Trumpeter Wyvern in 1:72 I thought: well, if I was going "what if", then I could also build the plane from scratch.

While browsing sources and older Hobby Japan issues, I came across the Sanka and Skyly fighters from Bandai - and things fell together. Why not build a fighter in the post-WWII look of "The Sky Crawlers"?

The construction:

The kit was constructed as a kitbashing, with some scratch elements added. Design benchmark was the Westland Wyvern, but the Skyly J2 also had some influence, as well as various turboprop prototype of the US Navy, esp. the Ryan "Darkshark".

What went into this model:

North American F-86 Sabre (1:72, Hobby Boss):

- Fuselage

- Cockpit interior

- Canopy

Vought F4U-5 Corsair (1:72; Revell):

- Wings

- Landing gear & wheels

- Antennae

Mitsubishi A6M Zero (1:72 , Hasegawa)

- Engine cowl

Gloster Meteor NF.11 (1:72, Xtrakit/Matchbox):

- Vertical fin & horizontal stabilizers

Other smaller donations:(

- McDonnell Douglas F-18A Hornet (1:72, Italieri):

Turboprop spinners (= drop tank halves)

- Martin B-26 Marauder (1x Matchbox, 1x Airfix): Propeller blades

- McDonnell Douglas F-4 Phantom (1:72, Matchbox):

RAF reconnaissance pod

- Grumman F9 Panther: underwing hardpoints

- Kamov Ka-34 "Hokum" (1:72, ESCI): jet exhaust bulges

- WWII pilot figure from an unknown Airfix kit

Building the thing went pretty straightforward. F-86 hull and the Mitsubishi Zero engine cowl were glued together and four coats of NC putty melted the into one. Only a small slit between fuselage and propeller was left open as an air intake for the turboprop engine.

The Corsair wings were taken right out fo the box and could be merged with only minor modifications. On the upper side of the wing/body intersection, bulges for the jet exhaust pipes were added on the fuselage flanks (they were intended to end behind the wings' trailing edge), they consist of parts of the engine pods of a Kamov Ka-34 "Hokum" kit from ESCI. Later, the fuselage was drilled open at their ends and sunk exhaust funnels added - simple polystyrene pipes of 6mm diameter.

A similar pipe was vertically fitted into the fuselage at the plane's CG, for in-flight display (photography purposes).

The cruciform tail comes from an Xtrakit Gloster Meteor NF.11. Originally I planned just to replace the Sabre tail with the complete Meteor tail cone, but the latter turned out to be too slim! As an emergency remedy, I only used the the Meteor's fin and cut away the original jet exhaust of the Sabre - replacing it with a new, fatter tail cone which was built with parts from an RAF F-4 reconnaissance pod from a Matchbox kit (and lots of putty, though). The result is a rather massive tail which reminds of a Mitsubishi Zero's shape, but overall the lines blend well.

The contraprops were built from scratch, and for photography purposes I built tweo specimen: one with propeller blades for static display, and the other one with two clear plastic discs, as if the propellers were running full speed. The base for both is a drop tank from an Italieri F-18 Hornet kit. For the static contraprop, this base was even cut in two and an axis fitted - the propeller is actually fully functional! Its propeller blades come from B-26 Marauder kits and were fitted with reversed pitches, so that the contra-rotating construction would be realistic. Inside of the fuselage, a plastic pipe was used as an adapter for both propellers, making the easily interchangeable.

Even though weapon hardpoints were added, the remained empty - even though my construction looks rather like an attack plane, I wanted to keep a clean air-to-air look and leave a clear view onto the very good Corsair landing gear. The latter was taken 1.1 from the donation kit, just the rear wheel was modified (w/o arresting hook) and a respective compartment cut out of the tail cone.

Livery and markings:

Another subject which was rather difficult. With "whif" planes, you easily end up with prominent markings and camouflage schemes - many such kits bear a Luft'46 look. While this would have been a nice option, I also considered Russian markings (on a pure Aluminum livery or a simple green/light blue cammo scheme). Even painting the whole thing dark blue and adding some white stars would have been a plausible option.

But for a special twist, I wanted to "catch" the retro but subtly colourful spirit of The Sky Crawlers, avoiding a retro-Luftwaffe look. First idea was something that would have looked like an USAF Mustang in late WWII: lower side bare metal, upper sides olive drab and some flashy colours on the spinner, wings and tail. But then I remembered "something different".

The final paint scheme was heavily derived from a rather weird livery which the P-47M "Thunderbolts" from the 63rd fighter squadron, 56th fighter group, 8th Air Force, based in the UK in the final WWII months. Those machines wore a bluish-grey two-tone camouflage on the upper sides, with bare metal undersides. The wings leading edges would be bare metal, too, the engine adorned with a red band and the vertical rudder would be blue. Pretty unique - and AFAIK there's even an airworthy P-47 in this guise around in the USA, flown/kept up by the Confederate Air Force historic flight. This specific machine was actually the benchmark for my paint scheme, because its colours are rather bright.

I more or less sticked to the P-47 paint scheme, just raised the bare metal undersides on the flanks and used brighter colors. These are:

- Testors #1562 "Flat Light Blue"

- Testors #2074 "RLM24 Dunkelblau"

- Testors #1401 "Aluminum Plate" Metallizer

All interior surfaces were painted with RLM02 from Testors, the spinner is plain Testors #1103 "Red". The white stripes were cut from a plain white decal sheet from TL Modellbau, the red insignia are actually French WWII squadron markings in 1:48 scale - also aftermarket pieces from Peddinghaus Decals. Stencelling and bort numbers come from the scrap box.

With the overall exotic shape and cammo scheme, I decided to leave other markings simple and rather neutral – no shark mouth or nose art, even though there would have been plenty of space for such a detail. But I think it would distract too much, and AFAIK no plane in The Sky Crawlers bears such flashy decoration.

The kit was lightly weathered with thinned black paint and some dry painting with shades of grey, plus gun smoke and exhaust fumes with dry-painted black. Everything was sealed under a thin coat of semi-matte varnish.

Final words:

This thing looks disturbingly realistic and plausible, even in its bright livery! While the finish is not perfect (hey, it is scratchbuilt!), the Fafnir (named after a German mythical dragon) really looks like a project from the late 40ies, one of the final high end fighters with a propeller. I am rather surprised how good the result became, and it is exciting to see how such a project evolves step by step, only with a vague idea as a basis. Won't be the last kitbashing!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Yakovlev Yak-38 (Russian: Яковлева Як-38; NATO reporting name: "Forger") was the Soviet Naval Aviation's first and only operational VTOL strike fighter aircraft, in addition to being its first operational carrier-based fixed-wing aircraft. It was developed specifically for and served almost exclusively on the Kiev-class aircraft carriers.

Officially, all Ukrainian Yak-138 were scrapped until 1994, even though rumor has it that one or two airframes had been sold behind the scenes to China. In Russia only five specimen had survived, and since the spares situation was doubtful none could be kept in flying condition. One Yak-138 was eventually handed over to the Ulyanovsk Aircraft Museum, while the rest was either mothballed or scrapped, too. Unfortunately, the sole museum exhibit was lost in 1995 in a fire accident.

General characteristics:

Crew: One

Length (incl. pitot): 15.84 m (51 ft 10 1/2 in)

Wingspan: 8,17 m (26 ft 9 in)

Height: 4.19 m (14 ft 3 in)

Wing area: 24.18 m² (260.27 ft²)

Empty weight: 7,385 kg (16,281 lb)

Max. takeoff weight: 11,300 kg (28,700 lb)

Powerplant:

1x Kuznetsov NK-32L-2 turbofan engine, rated at 137 kN (31,000 lbf)

Performance:

Maximum speed: 1,176 km/h (730 mph; 635 knots) at sea level

Combat radius: 230 mi (200 nmi, 370 km) lo-lo-lo with 4,400 lb (2,000 kg) payload

Ferry range: 2,129 mi (1,850 nmi, 3,425 km)

Endurance: 1 hr 30 min (combat air patrol – 115 mi (185 km) from base)

Service ceiling: 51,200 ft (15,600 m)

Time to climb to 40,000 ft (12,200 m): 2 min 23 s

Armament:

1x GSh-23L 23mm machine cannon with 250 RPG under the fuselage

5 hardpoints with a total external capacity of

- 3.000 kg (6,600 lb) for C/STOL operations and

- 2.000 kg (4.400 lb) in VTOL mode

Provisions to carry combinations of various types of unguided rockets (up to 240 mm), anti-ship

or air-to-surface Kh-23 (AS-7 Kerry) missiles (together with a Delta N guidance pod), R-60,

R-60M (AA-8 Aphid) or R-73 (AA-11 Archer) air-to-air missiles; tactical nuclear bombs, general

purpose bombs of up to 500 kg (1.100 lb) caliber, or incendiary ZB-500 napalm tanks or up to

three PTB-800 drop tanks under the fuselage and the inner pair of wing pylons

The kit and its assembly:

Sixth contribution to the “Soviet” Group Build at whatifmodelers.com in early 2017, on pretty short notice since the GB had been coming to its end. This totally fictional aircraft was inspired CG illustrations that had been roaming the WWW for some time: a hybrid between a Yak-38 (mostly the tail section), mated with an AV-8B Harrier II (cockpit, wings, landing gear). This did not look bad at all, yet a bit weird, with lift engines added in front of the fin. Certainly not conformal with a good CG balance – but I liked the idea of a single-engine Forger. And actually, OKB Yakovlev had been considering this.

So, the basic idea was a Harrier/Yak-38 kitbash. But the more I thought about the concept, the more additional donor parts came into play. One major addition was the nose section from a MiG-27 – with its slanted nose it would offer the pilot an excellent field of view, and the aircraft would, as a front line attack plane like the Harrier, not carry a radar, so the Flogger’s nose shape was perfect.

Therefore, initial ingredients for the Yak-138 were:

- Rear fuselage, wings and tail from a Tsukuda Hobby/Kangnam/Revell Yak-38

- Mid-fuselage with air intakes and front vectoring nozzles from a Matchbox Sea Harrier

- Cockpit from an Academy MiG-27

Work started with the MiG-27 cockpit, which was more or less taken OOB (except for side consoles in the cockpit and different seat), and the Yak-38 the tail section, built in parallel. To my surprise the Forger fuselage was easier to combine with the Harrier than expected, even though the position of the right cuts took multiple measurements until I came up with a proper solution. Since the Harrier is overall shorter than the Yak-38, the latter’s fuselage had to be shortened. I retained the tail cone, the Forger’s vectoring nozzles and the landing gear wells – and a 2cm plug was taken out between them. Instead of the Harrier’s tandem landing gear arrangement with outriggers under the outer wings, this one was to receive a conventional landing gear for optional C/STOL operations with a higher ordnance load, so that the Yak-38 parts were a welcome basis. Once the fuselage’s underside was more or less complete, the upper rest of the Yak-38 fuselage could be cut to size and integrated into the lower half and the Harrier parts.

After the rear end was settled, the MiG-27 cockpit could be mounted to the front end, which was slightly shortened by 2-3mm (since the Flogger’s is markedly longer than the short Harrier nose). In order to change the overall look of the aircraft, I eventually dropped the Harrier intakes and decided to use the Flogger’s boxy air intakes instead. These are considerably smaller than the gaping Harrier holes, and blending the conflicting shapes into each other for a more or less consistent look took several PSR turns. But it worked, better than expected, and it changes the aircraft’s look effectively, so that almost anything Harrier-esque was gone.

Once the fuselage was completed, I realized that I could not use the Yak-38 wings anymore. They are already pretty small, but with the more voluminous Harrier and Flogger parts added to the aircraft, they’d just be too small!

What to do...? I checked the donor bank and – in order to add even more individual flavor – used a pair of double delta wings from a PM Model Su-15! But only the core of them was left after considerable modifications: The inner delta wing sections were cut off, as well as the tip sections and parts of the trailing edge (for a planform similar to the Yak-38’s wings). On the underside, the landing gear openings were filled up and wing tips from the Yak-38, with puffer jet nozzles, transplanted. The inner leading edges had to be re-sculpted, too. The Su-15 wing fences were kept - a welcome, very Soviet design detail.

A lot of work, but I think it paid out because of the individual shape and look of these “new” wings?

As a consequence of the new, bigger wings, the little Yak-38 stabilizers could not be used anymore, either. In order to keep the square wing shape, I used modified stabilizers from an Intech F-16C/D – their trailing edges were clipped, but the bigger span retained. Together with the characteristic OOB Yak-38 fin they work well, and all of the aerodynamic surfaces IMHO blend well into the overall design of the aircraft.

After the hull was complete, work on smaller things could start. Under the fuselage, a GSh-23-2 pod from a MiG-21 was added, as well as pylons from the Tsukuda Yak-38 under the wings and a donor part from the scrap box in ventral position.

The landing gear is a mix, too: the main struts come from the Yak-38, the balloon wheels from the Matchbox Harrier. The front landing gear comes from the Academy MiG-27, including the wheels with mudguards. It was just mounted in a fashion that it now retracts forward.

The Harrier vectoring nozzles were modified, too, the exhaust “grills” replaced by square, simple ducts, scratched from styrene profile and putty. Care was taken that the nozzles would remain moveable in the fuselage flanks – for later hover pictures. The Yak-38’s nozzles were retained, but since they can OOB only be mounted in a single, fixed position, I added a simple pin to each nozzle, together with two holes in the hull, so that positions can now be switched between hover and level flight.

All around the hull, finally some small details like pitots, blade antennae and air scoops were finally added, and the ordnance consists of a pair of unguided 57mm rocket pods and a pair of Kh-23 (AS-7 Kerry) guided missiles – the latter come from the Yak-38 kit, but they are very crude and their tail sections were modified in order to come (slightly) closer to reality.

Painting and markings:

As an aircraft of the Soviet Frontal Aviation in the late Eighties, I settled upon a typical, disruptive four-tone camouflage with blue undersides. Very conventional, but with an exotic VTOL model I thought that a subtle look would be appropriate – and also separate it from the Naval Yak-38 cousin.

Design benchmark is the scheme on a contemporary MiG-21bis from a Soviert Frontal Aviation unit, chosen because of the disruptive pattern. The tones are guesstimates, though, based on various similar aircraft in more or less weathered condition. I settled for:

- Humbrol 195 (Dark Satin Green)

- Humbrol 78 (RAF Interior Green)

- Modelmaster 2005 (Burnt Umber)

- Humbrol 119 (Light Earth)

- Humbrol 115 (Russian Blue) for the undersides

The cockpit was painted in Russian Cockpit Green, opf course. The landing gear and their respective wells in a mix of Aluminum and Khaki Drab (Humbrol 56 & 26), and the wheel discs became bright green (Humbrol 131). Several di-electric panels and antennae were painted in Humbrol 106 (RAF Ocean Grey).

The kit received a thin black ink wash, in order to emphasize the panel lines, and panel post-shading with subtly lighter tones of the basic colors. National markings, codes and emblems come from several aftermarket sheets, mostly from High Decal Line and Begemot.

After some soot stains (grinded graphite) had been added, the kit was sealed with matt acrlyic varnish (Italeri) and the ordnace added.

Messy work, but I am surprised how consistent and normal the resulting aircraft appears? From certain angles, my Yak-138 creation reminds a good deal of the stillborn Hawker P.1154 (no similarity intended, though), the SEPECAT Jaguar or rather exotic Soko J-22 Orao/IAR-93 Vultur fighter bomber. IMHO, there’s also some A-4 Skyhawk style to it, esp. in planview? Anyway, there’s still some good Yak-38 heritage recognizable, and the tactical Frontal Aviation paint scheme suits the aircraft well - looks like a serious mud mover.

The kit and its assembly:

A major kitbashing project which I had on my idea list for a long time and its main ingredients/body donors already stashed away – but, as with many rather intimidating builds, it takes some external motivation to finally tackle the idea and bring it into hardware form. This came in August 2020 with the “Prototypes” group build at whatifmodellers.com, even though is still took some time to find the courage and mojo to start.

The original inspiration was the idea of a stealthy successor for the A-10, or a kind of more modern A-7 as an alternative to the omnipresent (and rather boring, IMHO) F-35. An early “ingredient” became the fuselage of a Zvezda Ka-58 stealth helicopter kit – I liked the edgy shape, the crocodile-like silhouette and the spacious side-by-side cockpit. Adding wings, however, was more challenging, and I remembered a 1:200 B-2A which I had turned into a light Swedish 1:72 attack stealth aircraft. Why not use another B-2 for the wings and the engines, but this time a bigger 1:144 model that would better match the quite bulbous Ka-58 fuselage? This donor became an Italeri kit.

Work started with the fuselage: the Ka-58’s engine and gearbox hump had to go first and a generous, new dorsal section had to be scratched with 1mm styrene sheet and some PSR. The cockpit and its glazing could be retained and were taken OOB. Under the nose, the Ka-58’s gun turret was omitted and a scratched front landing gear well was implanted instead.

The wings consist of the B-2 model; the lower “fuselage half” had its front end cut away, then the upper fuselage half of the Ka-58 was used as benchmark to cut the B-2’s upper wing/body part in two outer wing panels. Once these elements had been glued together, the Ka-58’s lower nose and tail section were tailored to match the B-2 parts. The B-2 engine bays were taken OOB and mounted next, so that the A-14’s basic hull was complete and the first major PSR session could start. Blending the parts into each other turned out to be a tedious process, since some 2-3 mm wide gaps had to be filled.

Once the basic BWP pack had been finished, I added the fins. These were taken from an 1:72 F-117 kit (IIRC from Italeri), which I had bought in a lot many moons ago. The fins were just adapted at their base to match the tail sting slope, and they were mounted in a 45° angle. This looks very F-117ish but was IMHO the most plausible solution.

Now that the overall length of the aircraft was defined, I could work on the final major assembly part: the wing tips. The 1:144 B-2 came with separate wing tip sections, but they proved to be much too long for the Squatina. After some trials I reduced their length by more than half, so that the B-2’s jagged wing trailing edge was kept. The result looks quite natural, even though blending the cut wing tips to the BWB turned out to be a PSR nightmare because their thickness reduces gently towards the tip – since I took out a good part of the inner section, the resulting step had to be sanded away and hidden with more PSR.

Detail work started next, including the cockpit glazing, the bomb bay (the B-2 kit comes with one of its bays open, and I kept this detail and modified the interior) and the landing gear, the latter was taken from the F-117 donor bank and fitted surprisingly well.

Some sensors were added, too, including a flat glass panel on the nose tip and a triangular IRST fairing under the nose, next to the landing gear well.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Douglas F3D Skyknight (later designated F-10 Skyknight) was a United States twin-engined, mid-wing jet fighter aircraft manufactured by the Douglas Aircraft Company in El Segundo, California. The F3D was designed as a carrier-based all-weather night fighter and saw service with the United States Navy and United States Marine Corps. The mission of the F3D-2 was to search out and destroy enemy aircraft at night.

The F3D was not intended to be a typical sleek and nimble dogfighter, but as a standoff night fighter, packing a powerful radar system and a second crew member. It originated in 1945 with a US Navy requirement for a jet-powered, radar-equipped, carrier-based night fighter. The Douglas team led by Ed Heinemann designed around the bulky air intercept radar systems of the time, with side-by-side seating for the pilot and radar operator. The result was an aircraft with a wide, deep, and roomy fuselage. Instead of ejection seats, an escape tunnel was used.

As a night fighter that was not expected to be as fast as smaller daylight fighters, the expectation was to have a stable platform for its radar system and the four 20 mm cannon mounted in the lower fuselage. The F3D was, however, able to outturn a MiG-15 in an inside circle. The fire control system in the F3D-1 was the Westinghouse AN/APQ-35.

The AN/APQ-35 was advanced for the time, a combination of three different radars, each performing separate functions: an AN/APS-21 search radar, an AN/APG-26 tracking radar, both located in the nose, and an AN/APS-28 tail warning radar. The complexity of this vacuum tube-based radar system, which was produced before the advent of semiconductor electronics, required intensive maintenance to keep it operating properly.

The F3D Skyknight was never produced in great numbers but it did achieve many firsts in its role as a night fighter over Korea. While it never achieved the fame of the North American F-86 Sabre, it did down several Soviet-built MiG-15s as a night fighter over Korea with only one air-to-air loss of its own against a Chinese MiG-15 on the night of 29 May 1953.

In the years after the Korean War, the F3D was gradually replaced by more powerful aircraft with better radar systems. The F3D's career was not over though; its stability and spacious fuselage made it easily adaptable to other roles. The Skyknight played an important role in the development of the radar-guided AIM-7 Sparrow missile in the 1950s which led to further guided air-to-air missile developments.

In 1954, the F3D-2M was the first U.S. Navy jet aircraft to be fitted with an operational air-to-air missile: the Sparrow I,an all weather day/night BVR missile that used beam riding guidance for the aircrew to control the flight of the missile. Only 38 aircraft (12 F3D-1Ms, and 16 F3D-2Ms) were modified to use the missiles, though.

One of the F3D's main flaws, which it shared with many early jet aircraft, was its lack of power and performance. Douglas tried to mend this through a radical redesign: The resulting F3D-3 was the designation assigned to a swept-winged version (36° sweep at quarter chord) of the Skyknight. It was originally to be powered by the J46 turbojet, rated at 4.080 lbf for takeoff, which was under development but suffered serious trouble.

This led to the cancellation of the J46, and calculated performance of the F3D-3 with the substitute J34 was deemed insufficient. As an alternative the aircraft had to be modified to carry two larger and longer J47-GE-2 engines, which also powered the USN's FJ-2 "Fury" fighter.

This engine's thrust of 6.000 pounds-force (27 kN) at 7,950 rpm appeared sufficient for the heavy, swept-wing aircraft, and in 1954 an order for 287 production F3D-3s was issued, right time to upgrade the new type with the Sparrow I.

While the F3D-3's outline resembled that of its straight wing predecessors, a lot of structural changes had to be made to accommodate the shifted main wing spar, and the heavy radar equipment also took its toll: the gross weight climbed by more than 3 tons, and as a result much of the gained performance through the stronger engines and the swept wings was eaten away.

Maximum internal fuel load was 1.350 US gallons, plus a further 300 in underwing drop tanks. Overall wing surface remained the same, but the swept wing surfaces reduced the wing span.

In the end, thrust-to-weight ratio was only marginally improved and in fact, the F3D-3 had a lower rate of climb than the F3D-2, its top speed at height was only marginally higher, and stall speed climbed by more than 30 mph, making carrier landings more complicated.

It's equipment was also the same - the AN/APQ-35 was still fitted, but mainly because the large radar dish offered the largest detection range of any carrier-borne type of that time, and better radars that could match this performance were still under construction. Anyway, the F3D-3 was able to carry Sparrow I from the start, and this would soon be upgraded to Sparrow III (which became the AIM-7), and it showed much better flight characteristics at medium altitude.

Despite the ,many shortcomings the "new" aircraft represented an overall improvement over the F3D-2 and was accepted for service. Production of the F3D-3 started in 1955, but technology advanced quickly and a serious competitor with supersonic capability appeared with the McDonnell F3H Demon and the F4D Skyray - much more potent aircraft that the USN immediately preferred to the slow F3Ds. As a consequence, the production contract was cut down to only 102 aircraft.

But it came even worse: production of the swept wing Skyknight already ceased after 18 months and 71 completed airframes. Ironically, the F3D-3's successor, the F3H and its J40 engine, turned out to be more capricious than expected, which delayed the Demon's service introduction and seriously hampered its performance, so that the F3D-3 kept its all weather/night fighter role until 1960, and was eventually taken out of service in 1964 when the first F-4 Phantom II fighters appeared in USN service.

In 1962 all F3D versions were re-designated into F-10, the swept wing F3D-3 became the F-10C. The straight wing versions were used as trainers and also served as an electronic warfare platform into the Vietnam War as a precursor to the EA-6A Intruder and EA-6B Prowler, while the swept-wing fighters were completely retired as their performance and mission equipment had been outdated. The last F-10C flew in 1965.

General characteristics

Crew: two

Length: 49 ft (14.96 m)

Wingspan: 42 feet 5 inches (12.95 m)

Height: 16 ft 1 in (4.90 m)

Wing area: 400 ft² (37.16 m²)

Empty weight: 19.800 lb (8.989 kg)

Loaded weight: 28,843 lb (13.095 kg)

Max. takeoff weight: 34.000 lb (15.436 kg)

Powerplant:

2× General Electric J47-GE-2 turbojets, each rated at 6.000 lbf (26,7 kN) each

Performance

Maximum speed: 630 mph (1.014 km/h) at sea level, 515 mph (829 km/h) t (6,095 m)

Cruise speed: 515 mph (829 km/h) at 40,000 feet

Stall speed: 128 mph (206 km/h)

Range: 890 mi (1.433 km) with internal fuel; 1,374 mi, 2,212 km with 2× 300 gal (1.136 l) tanks

Service ceiling: 43.000 ft (13.025 m)

Rate of climb: 2,640 ft/min (13,3 m/s)

Wing loading: 53.4 lb/ft² (383 kg/m²)

Thrust/weight: 0.353

Armament

4× 20 mm Hispano-Suiza M2 cannon, 200 rpg, in the lower nose

Four underwing hardpoints inboard of the wing folding points for up to 4.000 lb (1.816 kg)

ordnance, including AIM-7 Sparrow air-to-air missiles, 11.75 in (29.8cm) Tiny Tim rockets, two

150 or 300 US gal drop tanks or bombs of up to 2.000 lb (900 kg) caliber, plus four hardpoints

under each outer wing for a total of eight 5" HVARs or eight pods with six 2 3/4" FFARs each

The kit and its assembly:

Another project which had been on the list for some years now but finally entered the hardware stage. The F3D itself is already a more or less forgotten aircraft, and there are only a few kits available - there has been a vacu kit, the Matchbox offering and lately kits in 1:72 and 1:48 by Sword.

The swept wing F3D-3 remained on the drawing board, but would have been a very attractive evolution of the tubby Skyknight. In fact, the swept surfaces resemble those of the A3D/B-66 a Iot, and this was the spark that started the attempt to build this aircraft as a model through a kitbash.

This model is basically the Matchbox F3D coupled with wings from an Italeri B-66, even though, being much bigger, these had to be modified.

The whole new tail is based on B-66 material. The fin's chord was shortened, though, and a new leading edge (with its beautiful curvature) had to be sculpted from 2C putty. The vertical stabilizers also come from the B-66, its span was adjusted to the Skyknight's and a new root intersection was created from styrene and putty, so that a cross-shaped tail could be realized.

The tail radar dish was retained, even though sketches show the F3D-3 without it.

The wings were take 1:1 from the B-66 and match well. They just had to be shortened, I set the cut at maybe 5mm outwards of the engine pods' attachment points. They needed some re-engraving for the inner flaps, as these would touch the F3D-3's engines when lowered, but shape, depth and size are very good for the conversion.

On the fuselage, the wings' original "attachment bays" had to be filled, and the new wings needed a new position much further forward, directly behind the cockpit, in order to keep the CoG.

One big issue would be the main landing gear. On the straight wing aircraft it retracts outwards, and I kept this arrangement. No detail of the exact landing gear well position was available to me, so I used the Matchbox parts as stencils and placed the new wells as much aft as possible, cutting out new openings from the B-66 wings.

The OOB landing gear was retained, but I added some structure to the landing gear wells with plastic blister material - not to be realistic, just for the effect. A lot of lead was added in the kit's nose section, making sure it actually stands on the front wheel.

The Matchbox Skyknight basically offers no real problems, even though the air intake design leaves, by tendency some ugly seams and even gaps. I slightly pimped the cockpit with headrests, additional gauges and a gunsight, as well as two (half) pilot figures. I did not plan to present the opened cockpit and the bulbous windows do not allow a clear view onto the inside anyway, so this job was only basically done. In fact, the pilots don't have a lower body at all...

Ordnance comprises of four Sparrow III - the Sparrow I with its pointed nose could have been an option, too, but I think at the time of 1960 the early version was already phased out?

Painting and markings:

This was supposed to become a typical USN service aircraft of the 60ies, so a grey/white livery was predetermined. I had built an EF-10B many years ago from the Matchbox kit, and the grey/white guise suits the Whale well - and here it would look even better, with the new, elegant wings.

For easy painting I used semi matt white from the rattle can on the lower sides (painting the landing gear at the same time!), and then added FS 36440 (Light Gull Grey, Humbrol 129) with a brush to the upper sides. The radar nose became semi matt black (with some weathering), while the RHAWS dish was kept in tan (Humbrol 71).

In order to emphasize the landing gear and the respective wells I added a red rim to the covers.

The cockpit interior was painted in dark grey - another factor which made adding too many details there futile, too...

The aircraft's individual marking were to be authentic, and not flamboyant. In the mid 50ies the USN machines were not as colorful as in the Vietnam War era, that just started towards the 60ies.

The markings I used come primarily from an Emhar F3H Demon, which features no less than four(!) markings, all with different colors. I settled for a machine of VF-61 "Jolly Rogers", which operated from the USS Saratoga primarily in the Mediterranean from 1958 on - and shortly thereafter the unit was disbanded.

I took some of the Demon markings and modified them with very similar but somewhat more discrete markings from VMF-323, which flew FJ-4 at the time - both squadrons marked their aircraft with yellow diamonds on black background, and I had some leftover decals from a respective Xtradecal sheet in the stash.

IMHO a good result with the B-66 donation parts, even though I am not totally happy with the fin - it could have been more slender at the top, and with a longer, more elegant spine fillet, but for that the B-66 fin was just too thick. Anyway, I am not certain if anyone has ever built this aircraft? I would not call the F3D-3 elegant or beautiful, but the swept wings underline the fuselage's almost perfect teardrop shape, and the thing reminds a lot of the later Grumman A-6 Intruder?

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Republic P-47 Thunderbolt was one of the largest and heaviest fighter aircraft in history to be powered by a single piston engine. It was heavily armed with eight .50-caliber machine guns, four per wing. When fully loaded, the P-47 weighed up to eight tons, and in the fighter-bomber ground-attack roles could carry five-inch rockets or a significant bomb load of 2,500 pounds; it could carry over half the payload of the B-17 bomber on long-range missions (although the B-17 had a far greater range).

Twelve P-47H were lost in operational crashes with the 358th Group resulting in 11 deaths, two after VE Day, and two (44-21134 on 13 April 1945 and 44-21230 on 16 April 1945) were shot down in combat, both by ground fire.

General characteristics:

Crew: 1

Length: 39 ft 2 in (11.96 m)

Wingspan: 40 ft 9 in (12.42 m)

Height: 14 ft 8 in (4.47 m)

Wing area: 300 ft² (27.87 m²)

Empty weight: 10,000 lb (4,535 kg)

Loaded weight: 13,300 lb (6,032 kg)

Max. takeoff weight: 17,500 lb (7,938 kg)

Powerplant:

1× Chrysler XIV-2220-2 sixteen-cylinder inverted Vee liquid-cooled engine, rated at 2.450 hp.

Performance:

Maximum speed: 503 mph at 30,000 ft (810 km/h at 9,145 m)

Range: 920 mi combat, 2.175 ml ferry (1.480 km / 3.500 km)

Service ceiling: 43,000 ft (13,100 m)

Rate of climb: 3,120 ft/min (15.9 m/s)

Wing loading: 44.33 lb/ft² ()

Power/mass: 0.19 hp/lb (238 W/kg)

Armament:

8× .50 in (12.7 mm) M2 Browning machine guns (3.400 rounds)

Up to 2,500 lb (1,134 kg) of bombs, drop tanks and/or 10× 5 in (127 mm) unguided rockets

The kit and its assembly:

I had the (X)P-47H on the agenda for some time, and even the respective MPM kit stashed away. But it took some time to start this project - one reason actually being the, well, crudeness of the MPM offering. Anyway, I wanted to build a service aircraft, and I wondered how this would have looked like, way beyond 1944? That brought me towards the late bubble canopy versions of the P-47D - and suddenly the idea was born to convert the XP-47H into a respective service aircraft which would not only carry the Chrysler XIV-2220-1 V16 engine, but also other improvements of the type. This eventually led to the decision to make this build a kitbash, as a spine implantation would be the easiest way to incorporate the lowered back - or so I thought...

I chose the ancient Heller P-47(N) as donation kit. Not because it was “good”, it just had the right ingredients and was cheap and easy to procure. What sounded like a simple plan turned into a twisted route to vague success. I took the front fuselage and the lower belly from the MPM kit, as well as the horizontal stabilizers and mated it with the upper and rear fuselage of the Heller Thunderbolt. This could have been easy, if both kits would not have had different fuselage diameters - the Heller kit is about 1mm too narrow, even though the length is fine. In order to compensate, I built two new fuselage halves from the salvaged pieces, and once these were stable and more or less sanded even, put together. Inside, the cockpit was taken from the Heller kit, but the seat comes from the MPM kit, and a pilot figure was added. Another problem is the fact that the MPM kit features engraved panel lines, while the Heller kit has old school, raised details and lots of rivets.

The propeller from the MPM kit is a joke, so I built a replacement from scratch - from a drop tank front half from an ancient Revell F4U, and the individual propeller blades were taken from an Italeri F4U. Inside the fuselage, a styrene tube was implanted which holds the new propeller on a metal axis, so it can spin freely.

Other personal mods include lowered flaps and the large cooler intake was opened, with foamed styrene placed inside which mimics some mesh. The same method was also used inside of the intercooler outlets (primarily in order to block any light from shining through). Inside of the landing gear wells I added some structure made from styrene profiles.

Another bigger challenge was the wing attachment - Heller and MPM kit differ considerably in this aspect, so that swapping parts is not easy. The MPM kit has the wing roots molded onto the fuselage halves, while the Heller wings are, more or less, directly attached to the fuselage. As a consequence the Heller wings hold the complete landing gear wells, while the MPM solution has divided sections. I decided to get rid of the MPM wing roots, about 3mm of material, and onto these stubs the Heller wings were attached. The landing gear came from the Heller kit, but the main wheels come from a (new) Revell Me 262 - both MPM and Heller parts are not recommended for serious use... Finally, the many exhausts and cooler flaps were either sanded away and replaced by scratched parts, or added - e. g. the vents behind the cockpit. While the Heller kit features bomb and missile hardpoints under the wings I decided to leave them away - this is supposed to be a fast interceptor, not a train-hunting plough.

Painting and markings:

As this was to be a very late WWII aircraft, NMF was certain, and I wanted to place the service P-47H into the European conflict theatre, where its speed would IMHO be best used against German jet threats. I wanted a colorful aircraft, though, and settled for a machine of the 358th FG. This group actually flew Thunderbolts in the 365-367th Squadrons, and I found several profiles of these gaudy things.

Common to all of them was an orange tail and a dark blue back, while the engine cowling would be decorated with a red front and the air outlets would carry bands in red, white and blue, with lots of tiny stars sprinkled upon. Furthermore, I found specimen with white cowlings behind the red front end, or even yellow cowlings. Pretty cool.

I tried to mimic this look. The model was basically painted with Aluminum Metallizer (Humbrol 27002) overall. The effect is really good, even without rubbing treatment. Some panels were contrasted with Aluminium Plate and Polished Steel Metallizer (Modelmaster), as well as with Aluminum (Humbrol 56, which is rather a metallic grey). The latter was also used on the landing gear. The anti-glare panel in front of the cockpit was painted with Olive Drab (ANA 613 from Modelmaster).

Since there is no air intake opening on the inline engine I decided to paint the spinner in bright red (Humbrol 19), and tried to incorporate the white and blue theme with stars decoration to the rest of the nose. As a convenient coincidence, I found decals from an Italeri B-66 in the stash: it features a version with dark blue jet air intake decorations in the right size, colors and style for what I had been looking for. So, instead of painting everything by hand I decided to incorporate this decal option.

The area behind the spinner was painted white and then the B-66 decals applied to the front flanks. The radiator air intake scoop had to be cut out, but the overall size and shape were a very good match. Even the transition into the blue spine and cockpit area worked well!

The tail was painted with Humbrol 18, later some shading with Humbrol 82 was added. The blue spine was done with a mix of Humbrol 104 and 15 (Oxford Blue and Midnight Blue) - not a perfect match for the B-66 decal colors, but after some dirt and weathering these differences would blur.

Cockpit interior was painted in Humbrol 159 (Khaki Drab) and Zinc Chromate Green from Model Master. The landing gear wells received a chrome yellow primer (Humbrol 225 - actually RAF Mid Stone but a perfect match for the task) finish.

For weathering the kit received a rubbing treatment with grinded graphite, which adds a dark, metallic shine and emphasizes the kit’s raised panel lines. Some dry painting with Aluminum was added, too, simulating chipped paint on the leading edges. I also added some oil stains around the engine, and serious soot stains at the exhaust.

Decals were, beyond the B-66 decoration, puzzled together. The aircraft' code 'CH-F[bar]' is another exotic twist, in two ways. The bar under the letter marks a second use of that code within the squadron, and as a difference from normal code placement (normally exclusively on the fuselage) I placed the aircraft's individual code letter on the fin, a practice on some P-51s and a consequence of the relatively large letter decals.

The nose art is a fictional puzzle, consisting of a Czech MiG-21 pin-up from the Pardubice '89 meeting. The “Ohio Express” tag comes from a Tamiya 1:100 F-105 Thunderchief. A neat combination that even matches the overall colors well!

As a final step, a coat of semi matt acrylic varnish was applied, with the exception of the anti glare panel, which became purely matt.

A better XP-47H? Hard to tell, since this kitbashing was a messy and rather crude work, so the overall finish does not look as good as I hoped for. But the lowered spine and the fin root extension adds to a fast look of this thing, more elegant (if that's possible in this case?) than the Razorback prototypes. I can't help, but the finished article looks like an Evel Knievel stunt vehicle? The red spinner looks a bit odd, but I'll leave it this way.

A Phicen kit bash using a Kimi headsculpt .

White Metal Games

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Heinkel He 276 was a night fighter that served with the German Luftwaffe in the later stages of World War II. Its inception dated back to June 1942 when the RLM requested a multi-purpose combat aircraft, the so-called "Arbeitsflugzeug", that could be adapted to various roles and would replace the Bf 110, Ju 88/188 and Do 217.

The He 276 B-2 was the only version to enter service, though - a planned B-3 upgrade with four reheated Jumo 109s (rated at 1.200 kp each) remained on the drawing board.

General characteristics:

Crew: 2

Length (incl. rear antenna): 14.97 m (49 ft 2 in)

Wingspan: 16.56 m (54 ft 3 in)

Height: 5.14 m (16 ft 10 in)

Wing area: 44.4 m² (478 ft²)

Max. takeoff weight: 13,580 kg (29,900 lb)

Powerplant:

4× Junkers Jumo 109-004D jet engines, each rated at 1.015 kp

Performance:

Maximum speed: 916 km/h (494 kn, 568 mph)

Range: 1,540 km (831 nmi, 960 mi)

Ferry range: 2,148 km (1,160 nmi, 1,335 mi)

Service ceiling: 13.300 m (43.564 ft)

Armament:

4 × 30 mm MK 103 cannons in a detachable fairing under the fuselage, 220 RPG;

2× 13 mm MG 131 in an FDL 131ZR tail barbette, 450 RPG;

Factory Rüstsatz "U1" with 4× 30 mm (1.18 in) MK 108 cannons, mounted dorsally as

Schräge Musik (oriented 65° above horizontal), 100 RPG

Two hardpoints under the outer wings, capable of carrying 500 kg each

(normally occupied by 300l drop tanks).

The kit and its assembly:

This whiffy Luft ’46 aircraft model had two inspirational roots. One was the question what could a jet-powered He 219 night fighter have looked like, the other was the real Heinkel P.1065 ‘Arbeitsflugzeug’ project(s), following the idea what that aircraft might have looked like if it had been ushered into production and service?

It would certainly have relied upon existing components – so the concept for this jet-propelled, dedicated night fighter design was born.

The model is a wild kitbash, welded together from the following main ingredients:

• Fuselage of a 1:72 Frog He 219 (Matchbox re-boxing)

• Wings from a 1:100 VEB Plasticart An-24 (NuBee re-boxing)

• Two pairs of 1:72 Revell Me 262 engine nacelles

• Fin and stabilizer from an 1:72 Matchbox Douglas F3D Skyknight

Sounds odd? Yes, and it took some surgical work to get these pieces together. The He 219 fuselage was shortened, a 1” plug taken out at the wings’ trailing edge, thereby shortening the wing roots to the An-24’s dimensions, and the tail section cut off. The tail gap was replaced by a scratched FDL 131Z barbette, and new stabilizers from a Matchbox F3D placed on top of the fuselage, far away from the jet efflux.

I did not want to open the cockpit, but the canopy offers good visibility into the interior, so I scratched something together - the Frog kit has literally nothing of value to offer, so I added a new floor (also acting as front wheel well), new Me 262 seats, dashboards, an IR sight and something that looks like the upper side of a fuselage tank, plus two crew figures.

The wings were clipped, too, and the original An-24 turboprops replaced by two pairs of Me 262 engines in the same place, mounted closely together.

This meant that the landing gear had to go elsewhere, so I relocated the main landing gear wells into the lower fuselage, changing it into a narrow Ar 234 or B-66 style arrangement - from AH-64, F-86 and Bv 155 parts.

For this new arrangement the belly was cut open and a Fiat G.91 part from a Revell kit integrated. The covers for the main landing gear were scratched from sytrene sheet.

The front wheel strut is OOB, but shortened, and instead of a single, big wheel I used smaller twin wheels, from a Matchbox Canberra PR.9. After 25 years these parts finally found a new destination. ^^

The thimble radome is a Pavla resin piece, it actually belongs to a Bristol Beaufighter TF Mk. X, but perfectly fits ins shape and size - and the new nose dramatically changes the He 219 lines!

On the fuselage, I finally added four vertical guns as a "Schräge Musik" installation, adding some more purpose to the rather ugly aircraft. A pair of drop tanks (from two Academy Fw 190 kits) and their respective hardpoints (from a Me 262) complete the ordnance.

I must admit that the thing is ugly as hell, but on the other side looks very German and purposeful - and the new nose section recalls some similarity with a CF-100 or even a B-57a C-130 or a Transall?

Painting and markings:

As a late war German night fighter, almost anything goes. I went for a personal mix of two real night fighter schemes, blended into one: the basis comes from a Me 262 two seater which was finished in an unusual scheme for night duties: upper surfaces in RLM 81 & 83 (Braunviolett and Dunkelgrün), with black (RLM 22) undersides.

Since many night fighters received field modifications, and in patricular much lighter upper surfaces, I added an individual RLM 76 treatment (maybe whitewash, though - not certain if it was intended as winter or night cammo) that comes from a Ju 188 night reconnaissance aircraft and which can only be described as original.

In an initial step the model received its normal paint scheme (using Humbrol 116 and 155, plus flat black from Modelmaster), the RLM 76 additions (with Modelmaster Authentic enamel paint and some Humbrol 127) were then added, so that the original paint could shine through. Everything done with a soft brush, and the result is IMHO very good.

All interior surfaces and the landing gear were painted in dark grey (Humbrol 67) and later slightly dry-painted with medium grey (Humbrol 176) in order to point out details.

Decals were puzzled together from various sources, and I kept everything very simple and minimal - just some German insignia, a tactical code and the last digits of the airframe's serial number at the top of the fin.

Finally, some soot stains were added with grinded graphite and everything sealed under matt acrylic varnish (Revell).

I will admit that the He 276 is an ugly aircraft, with a rather utilarian design. But this actually adds a very German touch to it - and how else could a successos to the He 219 or Ju 88 C look like? ;)

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Republic P-47 Thunderbolt was one of the largest and heaviest fighter aircraft in history to be powered by a single piston engine. It was heavily armed with eight .50-caliber machine guns, four per wing. When fully loaded, the P-47 weighed up to eight tons, and in the fighter-bomber ground-attack roles could carry five-inch rockets or a significant bomb load of 2,500 pounds; it could carry over half the payload of the B-17 bomber on long-range missions (although the B-17 had a far greater range).

Twelve P-47H were lost in operational crashes with the 358th Group resulting in 11 deaths, two after VE Day, and two (44-21134 on 13 April 1945 and 44-21230 on 16 April 1945) were shot down in combat, both by ground fire.

General characteristics:

Crew: 1

Length: 39 ft 2 in (11.96 m)

Wingspan: 40 ft 9 in (12.42 m)

Height: 14 ft 8 in (4.47 m)

Wing area: 300 ft² (27.87 m²)

Empty weight: 10,000 lb (4,535 kg)

Loaded weight: 13,300 lb (6,032 kg)

Max. takeoff weight: 17,500 lb (7,938 kg)

Powerplant:

1× Chrysler XIV-2220-2 sixteen-cylinder inverted Vee liquid-cooled engine, rated at 2.450 hp.

Performance:

Maximum speed: 503 mph at 30,000 ft (810 km/h at 9,145 m)

Range: 920 mi combat, 2.175 ml ferry (1.480 km / 3.500 km)

Service ceiling: 43,000 ft (13,100 m)

Rate of climb: 3,120 ft/min (15.9 m/s)

Wing loading: 44.33 lb/ft² ()

Power/mass: 0.19 hp/lb (238 W/kg)

Armament:

8× .50 in (12.7 mm) M2 Browning machine guns (3.400 rounds)

Up to 2,500 lb (1,134 kg) of bombs, drop tanks and/or 10× 5 in (127 mm) unguided rockets

The kit and its assembly:

I had the (X)P-47H on the agenda for some time, and even the respective MPM kit stashed away. But it took some time to start this project - one reason actually being the, well, crudeness of the MPM offering. Anyway, I wanted to build a service aircraft, and I wondered how this would have looked like, way beyond 1944? That brought me towards the late bubble canopy versions of the P-47D - and suddenly the idea was born to convert the XP-47H into a respective service aircraft which would not only carry the Chrysler XIV-2220-1 V16 engine, but also other improvements of the type. This eventually led to the decision to make this build a kitbash, as a spine implantation would be the easiest way to incorporate the lowered back - or so I thought...

I chose the ancient Heller P-47(N) as donation kit. Not because it was “good”, it just had the right ingredients and was cheap and easy to procure. What sounded like a simple plan turned into a twisted route to vague success. I took the front fuselage and the lower belly from the MPM kit, as well as the horizontal stabilizers and mated it with the upper and rear fuselage of the Heller Thunderbolt. This could have been easy, if both kits would not have had different fuselage diameters - the Heller kit is about 1mm too narrow, even though the length is fine. In order to compensate, I built two new fuselage halves from the salvaged pieces, and once these were stable and more or less sanded even, put together. Inside, the cockpit was taken from the Heller kit, but the seat comes from the MPM kit, and a pilot figure was added. Another problem is the fact that the MPM kit features engraved panel lines, while the Heller kit has old school, raised details and lots of rivets.

The propeller from the MPM kit is a joke, so I built a replacement from scratch - from a drop tank front half from an ancient Revell F4U, and the individual propeller blades were taken from an Italeri F4U. Inside the fuselage, a styrene tube was implanted which holds the new propeller on a metal axis, so it can spin freely.

Other personal mods include lowered flaps and the large cooler intake was opened, with foamed styrene placed inside which mimics some mesh. The same method was also used inside of the intercooler outlets (primarily in order to block any light from shining through). Inside of the landing gear wells I added some structure made from styrene profiles.

Another bigger challenge was the wing attachment - Heller and MPM kit differ considerably in this aspect, so that swapping parts is not easy. The MPM kit has the wing roots molded onto the fuselage halves, while the Heller wings are, more or less, directly attached to the fuselage. As a consequence the Heller wings hold the complete landing gear wells, while the MPM solution has divided sections. I decided to get rid of the MPM wing roots, about 3mm of material, and onto these stubs the Heller wings were attached. The landing gear came from the Heller kit, but the main wheels come from a (new) Revell Me 262 - both MPM and Heller parts are not recommended for serious use... Finally, the many exhausts and cooler flaps were either sanded away and replaced by scratched parts, or added - e. g. the vents behind the cockpit. While the Heller kit features bomb and missile hardpoints under the wings I decided to leave them away - this is supposed to be a fast interceptor, not a train-hunting plough.

Painting and markings:

As this was to be a very late WWII aircraft, NMF was certain, and I wanted to place the service P-47H into the European conflict theatre, where its speed would IMHO be best used against German jet threats. I wanted a colorful aircraft, though, and settled for a machine of the 358th FG. This group actually flew Thunderbolts in the 365-367th Squadrons, and I found several profiles of these gaudy things.

Common to all of them was an orange tail and a dark blue back, while the engine cowling would be decorated with a red front and the air outlets would carry bands in red, white and blue, with lots of tiny stars sprinkled upon. Furthermore, I found specimen with white cowlings behind the red front end, or even yellow cowlings. Pretty cool.

I tried to mimic this look. The model was basically painted with Aluminum Metallizer (Humbrol 27002) overall. The effect is really good, even without rubbing treatment. Some panels were contrasted with Aluminium Plate and Polished Steel Metallizer (Modelmaster), as well as with Aluminum (Humbrol 56, which is rather a metallic grey). The latter was also used on the landing gear. The anti-glare panel in front of the cockpit was painted with Olive Drab (ANA 613 from Modelmaster).

Since there is no air intake opening on the inline engine I decided to paint the spinner in bright red (Humbrol 19), and tried to incorporate the white and blue theme with stars decoration to the rest of the nose. As a convenient coincidence, I found decals from an Italeri B-66 in the stash: it features a version with dark blue jet air intake decorations in the right size, colors and style for what I had been looking for. So, instead of painting everything by hand I decided to incorporate this decal option.

The area behind the spinner was painted white and then the B-66 decals applied to the front flanks. The radiator air intake scoop had to be cut out, but the overall size and shape were a very good match. Even the transition into the blue spine and cockpit area worked well!

The tail was painted with Humbrol 18, later some shading with Humbrol 82 was added. The blue spine was done with a mix of Humbrol 104 and 15 (Oxford Blue and Midnight Blue) - not a perfect match for the B-66 decal colors, but after some dirt and weathering these differences would blur.

Cockpit interior was painted in Humbrol 159 (Khaki Drab) and Zinc Chromate Green from Model Master. The landing gear wells received a chrome yellow primer (Humbrol 225 - actually RAF Mid Stone but a perfect match for the task) finish.

For weathering the kit received a rubbing treatment with grinded graphite, which adds a dark, metallic shine and emphasizes the kit’s raised panel lines. Some dry painting with Aluminum was added, too, simulating chipped paint on the leading edges. I also added some oil stains around the engine, and serious soot stains at the exhaust.

Decals were, beyond the B-66 decoration, puzzled together. The aircraft' code 'CH-F[bar]' is another exotic twist, in two ways. The bar under the letter marks a second use of that code within the squadron, and as a difference from normal code placement (normally exclusively on the fuselage) I placed the aircraft's individual code letter on the fin, a practice on some P-51s and a consequence of the relatively large letter decals.

The nose art is a fictional puzzle, consisting of a Czech MiG-21 pin-up from the Pardubice '89 meeting. The “Ohio Express” tag comes from a Tamiya 1:100 F-105 Thunderchief. A neat combination that even matches the overall colors well!

As a final step, a coat of semi matt acrylic varnish was applied, with the exception of the anti glare panel, which became purely matt.

A better XP-47H? Hard to tell, since this kitbashing was a messy and rather crude work, so the overall finish does not look as good as I hoped for. But the lowered spine and the fin root extension adds to a fast look of this thing, more elegant (if that's possible in this case?) than the Razorback prototypes. I can't help, but the finished article looks like an Evel Knievel stunt vehicle? The red spinner looks a bit odd, but I'll leave it this way.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Northrop Grumman-IAI F-24 is the latest reincarnation of the USAF "Lightweight Fighter Program" which dates back to the 1950ies and started with the development of Northrop's F-5 "Freedom Fighter".

International interest for the F-24A is already there: in late 2013 Grumman stated that initial talks have been made with various countries, and potential export candidates from 2015 on are Taiwan, Singapore, Thailand, Finland, Norway, Australia and Japan.

General F-24A characteristics:

Crew: 1 pilot

Length: 47 ft 4 in (14.4 m)

Wingspan: 27 ft 11.9 in / 8.53 m; with wingtip missiles (26 ft 8 in/ 8.13 m; without wingtip missiles)

Height: 13 ft 10 in (4.20 m)

Wing area: 36.55 m² (392 ft²)

Empty weight: 13.150 lb (5.090 kg)

Loaded weight: 15.480 lb (6.830 kg)

Max. take-off weight: 27.530 lb (12.500 kg)

Powerplant

1× General Electric F404-GE-402 turbofan with a dry thrust of 11,000 lbf (48.9 kN) and 17,750 lbf (79.2 kN) with afterburner

Performance

Maximum speed: Mach 2+

Combat radius: 300 nmi (345 mi, 556 km); for hi-lo-hi mission with 2 × 330 US gal (1,250 L) drop tanks

Ferry range: 1,490 nmi (1715 mi, 2759 km); with 3 × 330 US gal (1,250 L) drop tanks

Service ceiling: 55,000 ft (16,800 m)

Rate of climb: 52,800 ft/min (255 m/s)

Wing loading: 70.0 lb/ft² (342 kg/m²)

Thrust/weight: 1.09 (1.35 with loaded weight & 50% fuel)

Armament

1× 20 mm (0.787 in) M199A1 3-barreled Gatling cannon in the lower fuselage with 400 RPG

Eleven external hardpoints (two wingtip tails, six underwing hardpoints, three underfuselage hardpoints) and a total capacity of 11.000 lb (4.994 kg) of missiles (incl. AIM 9 Sidewinder and AIM 120 AMRAAM), bombs, rockets, ECM pods and drop tanks for extended range.

The kit and its assembly:

A spontaneous project. This major kitbash was inspired by fellow user nighthunter at whatifmodelers.com, who came up with a profile of a mashed-up US fighter, created “out of boredom”. The original idea was called F-21C, and it was to be a domestic successor to the IAI Kfirs which had been used by the US as aggressor aircraft in USN and USMC service for a few years.

As a weird(?) coincidence I had many of the necessary ingredients for this fictional aircraft in store, even though some parts and details were later changed. This model here is an interpretation of the original design. The idea was spun further, and the available parts that finally went into the model also had some influence on design and background.

I thank nighthunter for sharing the early ideas, inviting me to take the design to the hardware stage (sort of…) and adapting my feedback into new design sketches, too, which, in return, inspired the model building process.

Well, what went into this thing? To cook up a F-24 à la Dizzyfugu you just need (all in 1:72):

● Fuselage from a Hasegawa X-29, including the cockpit and the landing gear

● Fin and nose cone from an Italeri F-16A

● Inner wings from a (vintage) Hasegawa MiG-21F

● Outer wings from a F-4 (probably a J, Hasegawa or Fujimi)

The wing construction deviates from nighthunter’s original idea. The favorite ingredients would have been F-16XL or simple Mirage III wings, but I found the composite wing to be more attractive and “different”. The big F-16XL wings, despite their benefit of a unique shape, might also have created scale/size problems with a F-20 style fuselage? So I built hybrid wings: The MiG-21 landing gear wells were filled with putty and the F-4 outer wings simply glued onto the MiG inner wing sections, which were simply cut down in span. It sounds like an unlikely combo, but these parts fit together almost perfectly! In order to hide the F-4 origins I modified them to carry wingtip launch rails, though, which were also part of nighthunter’s original design.

The AAW technology detail mentioned in the background came in handy as it explains the complicated wing shape and the fact that the landing gear retracts into the fuselage, not into the wings, which would have been more plausible… Anyway, there’s still room for a simpler export version, with Mirage III or Kfir C.2/7 wings, and maybe canards?

Using the X-29 as basis also made fitting the new wings onto the area-ruled fuselage pretty easy, as I could use the wing root parts from the X-29 to bridge the gap. The original, forward-swept wings were just cut away, and the remains used as consoles for the new hybrid delta wings. Took some SERIOUS putty work, but the result is IMHO fine.

The bigger/square X-29 air intakes were taken over, and they change the look of the aircraft, making it look less F-5-ish than a true F-20 fuselage. For the same reason I kept the large fairing at the fin base, combining it with a bigger F-16 tail, though, as a counter-balance to the new, bigger wings. Again, the F-16 fin was/is part of nighthunter’s idea, so the model stays true to the original concept.

For the same reason I omitted the original X-29 nose, which is rather pointy, sports vanes and a large sensor boom. The F-16 nose was a plausible choice, as the AN/APG-80 is also carried by late Fighting Falcons, and its shape fits well, too.

All around the hull, some small details like radar warning sensors, pitots and air scoops were added. Not really necessary, but such thing add IMHO to the overall impression of such a fictional aircraft beyond the prototype stage.

Cockpit and landing gear were taken OOB, I just added a pilot figure and slightly modified the seat.

The ordnance was puzzled together from the scrap box, the AIM-9Ls come from the same F-4 kit which donated its outer wings, the AIM-120s come from an Italeri NATO weapons kit. The drop tanks belong to an F-16.

Painting and markings:

At first I considered an F-24I in IAF markings, or even a Japanese aircraft, but then reverted to one of nighthunter’s initial, simple ideas: an USAF aircraft in the “Hill II” paint scheme (F-16 style), made up from three shades of gray (FS 36118, 36270 and 36375) with low-viz markings and stencils. Dutch/Turkish NF-5A/Bs in the “Hill II” scheme were used as design benchmarks, too. It’s a simple livery, but on this delta wing aircraft it looks pretty interesting. I used enamels, what I had at hand: Humbrol 127 and 126, and Modelmaster's 1723.

A light black ink wash was applied, in order to em,phasize the engraved panel lines, in contrast to that, panels were manually highlighted through dry-brushed, lighter shades of gray (Humbrol 27, 166 and 167).

“Hill II” also adds to a generic, realistic touch for this whif. Doing an exotic air force thing is rather easy, but creating a convincing whif for a huge military machinery like the USAF’s takes more subtlety, I think.

The cockpit was painted in medium Gray (Dark Gull Grey, FS 36231, Humbrol 140), as well as the radome. The landing gear and the air intakes were painted white. The radome was painted with Revell 47 and dry-brushed with Humbrol 140.

Decals were puzzled together from various USAF aircraft, including sheets from an Airfix F-117, an Italeri F-15E and even an Academy OV-10D.

Tadah: a hardware tribute to an idea, born from boredom - and the aircraft does not look even bad at all? What I wanted to achieve was to make the F-24 neither look like a F-20, nor a Saab Gripen clone, as the latter comes close in overall shape, size and design.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The Lockheed P-80 Shooting Star was the first jet fighter used operationally by the United States Army Air Forces (USAAF) during World War II. Designed and built by Lockheed in 1943 and delivered just 143 days from the start of design, production models were flying, and two pre-production models did see very limited service in Italy just before the end of World War II. The XP-80 had a conventional all-metal airframe, with a slim low wing and tricycle landing gear. Like most early jets designed during World War II—and before the Allies captured German research data that confirmed the speed advantages of swept-wings—the XP-80 had straight wings similar to previous propeller-driven fighters, but they were relatively thin to minimize drag at high speed.

For the Luftwaffe the F-80E had become obsolete, and to reduce the number of operational aircraft types, the remaining German aircraft, a total of 34, were in 1965 passed through to the Türk Hava Kuvvetleri (Turkish air force) as part of international NATO military support, where they remained in service until 1974 and were replaced by third generation F-4E Phantom II fighter jets.

General characteristics:

Crew: 1

Length: 36 ft 9 1/2 in (11.23 m)

Wingspan: 37 ft 6 in (11.44 m) over tip tanks

Height: 13 ft 5 1/4 in (4.10 m)

Wing area: 241.3 sq ft (22,52 m²)

Empty weight: 10,681 lb (4.845 kg)

Max. takeoff weight: 18,464 lb (8.375 kg)

Zero-lift drag coefficient: 0.0134

Frontal area: 32 sq ft (3.0 m²)

Powerplant:

1× Allison J33-A-39 centrifugal compressor turbojet with 4,600 lbf (20 kN) dry thrust

and 27.0 kN (6,070 lbf) thrust with afterburning

Performance:

Maximum speed: 1,060 km/h (660 mph, 570 kn)

Cruise speed: 439 mph (707 km/h, 381 kn)

Range: 825 mi (1,328 km, 717 nmi)

Ferry range: 1,380 mi (2,220 km, 1,200 nmi)

Service ceiling: 50,900 ft (15,500 m)

Rate of climb: 7,980 ft/min (40.5 m/s)

Time to altitude: 20,000 ft (6,100 m) in 4 minutes 50 seconds

Lift-to-drag: 17.7

Wing loading: 51.3 lb/sq ft (250 kg/m²)

Thrust/weight: 0.249 dry

0.328 with afterburner

Armament:

4× 0.79 in (20 mm) M24 cannon (190 rpg)

2x wing tip auxiliary tanks with 225 US gal (187 imp gal; 850 l) each

Underwing hardpoints for a total ordnance load of 4,800 lb (2.200 kg), including

2× 1,000 lb (454 kg) bombs, up to 4× pods with nineteen unguided Mighty Mouse FFARs each,

and/or up to 8× 5” (127 mm) HVAR unguided air-to-ground rockets

The kit and its assembly:

The idea of a swept-wing F-80 had been lingering on my idea list for a while, and I actually tried this stunt before in the form of a heavily modified F-94. The recent “Fifties” group build at whatifmodellers.com and a similar build by fellow forum member mat revived the interest in this topic – and inspired by mat’s creation, based on a T-33 fuselage, I decided to use the opportunity and add my personal interpretation of the idea.

Having suitable donor parts at hand was another decisive factor to start this build: I had a Heller T-33 in store, which had already been (ab)used as a donor bank for other projects, and which could now find a good use. I also had an F-80 canopy left over (from an Airfix kit), and my plan was to use Saab J29 wings (from a Matchbox kit) because of their limited sweep angle that would match the post-WWII era well.

Work started with the fuselage; it required a completely new cockpit interior because these parts had already gone elsewhere. I found a cockpit tub with its dashboard from an Italeri F4U, and with some trimming it could be mounted into the reduced cockpit opening, above the OOB front landing gear well. The T-33’s rear seat was faired of with styrene sheet and later PSRed away. The standard nose cone from the Heller T-33 was used, but I added gun ports for the new/different cannon armament.

For a different look with an afterburner engine I modified the tail section under the stabilizers, which was retained because of its characteristic shape. A generous section from the tail was cut away and replaced with the leftover jet pipe from an Italeri (R)F-84F, slightly longer and wider and decorated with innards from a Matchbox Mystère IV. This change is rather subtle but changes the F-80 profile and appears like a compromise between the F-80 and F-94 arrangements.

The T-33 wings were clipped down to the connection lower fuselage part. This ventral plate with integral main landing gear wells was mounted onto the T-33 hull and then the Saab 29 wings were dry-fitted to check their position along the fuselage and to define the main landing gear wells, which had to be cut into them to match their counterparts from the aircraft’s belly.

Their exact position was eventually fixed when the new swept stabilizers, taken from a Hobby Boss F-86, were mounted to the tail. They match well with the swept wings, and for an odd look I kept their dihedral.

The fin was eventually replaced, too – mat’s build retained the original F-80 fin, but with all other surfaces swept I found that the fin had to reflect this, too. So, I implanted a shortened Italeri (R)F-84F fin onto the original base, blended with some PSR into the rest of the tail.

With all aerodynamic surfaces in place it was time for fine-tuning, and to give the aircraft a simpler look I removed the dog teeth from the late Tunnan's outer wings, even though I retained the small LERXs. The wing tips were cut down a little and tip tanks (probably drop tanks from a Hobby Boss F-5E) added – without them the aircraft looked like a juvenile Saab 32!

The landing gear was mostly taken over from the Heller T-33, I just added small consoles for the main landing gear struts to ensure a proper stance, because the new wings and the respective attachment points were deeper. I also had to scratch some landing gear covers because the T-33 donor kit was missing them. The canopy was PSRed over the new opening and a new ejection seat tailored to fit into the F4U cockpit.

A final addition was a pair of pods with unguided FFARs. AFAIK the Luftwaffe did not use such weapons, but they’d make thematically sense on a Fifties anti-bomber interceptor - and I had a suitable pair left over from a Matchbox Mystère IV kit, complete with small pylons.

Painting and markings:

Since the time frame was defined by the Fifties, early Luftwaffe fighters had to carry a bare metal finish, with relatively few decorations. For the F-80E I gave the model an overall base coat with White Aluminum from a Dupli Color rattle can, a very nice and bright silver tone that comes IMHO close to NMF. Panels were post-shaded with Revell 99 (Aluminum) and 91 (Iron Metallic). An anti-glare panel in front of the windscreen was painted in the Luftwaffe tone RAL 6014, Gelboliv (Revell 42).

For some color highlights I gave the tip tanks bright red (Feuerrot, RAL 3000; Revell 330) outer halves, while the inner halves were painted black to avoid reflections that could distract the pilot (seen on a real Luftwaffe T-33 from the late Fifties). For an even more individual touch I added light blue (Tamiya X-14, Sky Blue) highlights on the nose and the fin, reflecting the squadron’s color code which is also carried within the unit emblem – the Tamiya paint came closest to the respective decal (see below).

The cockpit interior was painted with zinc chromate green primer (I used Humbrol 80, which is brighter than the tone should be, but it adds contrast to the black dials on the dashboard), the landing gear wells were painted with a mix of Humbrol 80 and 81, for a more yellowish hue. The landing gear struts became grey, dry-brushed with silver, while the inside of the ventral air brakes were painted in Feuerrot, too.

Then the model received an overall washing with black ink to emphasize the recessed panel lines, plus additional panel shading with Matt Aluminum Metallizer (Humbrol 27001), plus a light rubbing treatment with grinded graphite that emphasized the (few leftover) raised panel lines and also added a dark metallic shine to the silver base. Some of the lost panel lines were simulated with simple pencil strokes, too.

The decals/markings primarily came from an AirDoc aftermarket sheet for late Fifties Luftwaffe F-84Fs. The tactical code (“BB-xxx” was then assigned to the WaSLw 10 as unit code, but this soon changed to a similar but different format that told about the unit’s task as well as the specific unit and squadron within it; this was replaced once more by a simple xx+yy code that was only connected to a specific aircraft with no unit reference anymore, and this format is still in use today) was puzzled together from single letters/digits from the same decal set. Some additional markings like the red band on the fuselage had to be scratched, but most stencils came from an all-bare-metal Luftwaffe F-84F.

After some more detail painting the model was sealed with semi-gloss acrylic paint, just the anti-glare panel and the di-electric fairings on the nose and the fin tip became matt.

A thorough kitbashing build, but the result looks quite plausible, if not elegant? The slightly swept wings suit the F-80 with its organic fuselage shape well, even though they reveal the designs rather baroque shape. There’s a sense of obsolescence about the F-80E, despite its modern features? The Luftwaffe markings work well on the aircraft, too, and with the red and blue highlights the machine looks more attractive despite its simple NMF livery than expected.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Northrop Grumman-IAI F-24 is the latest reincarnation of the USAF "Lightweight Fighter Program" which dates back to the 1950ies and started with the development of Northrop's F-5 "Freedom Fighter".

International interest for the F-24A is already there: in late 2013 Grumman stated that initial talks have been made with various countries, and potential export candidates from 2015 on are Taiwan, Singapore, Thailand, Finland, Norway, Australia and Japan.

General F-24A characteristics:

Crew: 1 pilot

Length: 47 ft 4 in (14.4 m)

Wingspan: 27 ft 11.9 in / 8.53 m; with wingtip missiles (26 ft 8 in/ 8.13 m; without wingtip missiles)

Height: 13 ft 10 in (4.20 m)

Wing area: 36.55 m² (392 ft²)

Empty weight: 13.150 lb (5.090 kg)

Loaded weight: 15.480 lb (6.830 kg)

Max. take-off weight: 27.530 lb (12.500 kg)

Powerplant

1× General Electric F404-GE-402 turbofan with a dry thrust of 11,000 lbf (48.9 kN) and 17,750 lbf (79.2 kN) with afterburner

Performance

Maximum speed: Mach 2+

Combat radius: 300 nmi (345 mi, 556 km); for hi-lo-hi mission with 2 × 330 US gal (1,250 L) drop tanks

Ferry range: 1,490 nmi (1715 mi, 2759 km); with 3 × 330 US gal (1,250 L) drop tanks

Service ceiling: 55,000 ft (16,800 m)

Rate of climb: 52,800 ft/min (255 m/s)

Wing loading: 70.0 lb/ft² (342 kg/m²)

Thrust/weight: 1.09 (1.35 with loaded weight & 50% fuel)

Armament

1× 20 mm (0.787 in) M199A1 3-barreled Gatling cannon in the lower fuselage with 400 RPG

Eleven external hardpoints (two wingtip tails, six underwing hardpoints, three underfuselage hardpoints) and a total capacity of 11.000 lb (4.994 kg) of missiles (incl. AIM 9 Sidewinder and AIM 120 AMRAAM), bombs, rockets, ECM pods and drop tanks for extended range.

The kit and its assembly:

A spontaneous project. This major kitbash was inspired by fellow user nighthunter at whatifmodelers.com, who came up with a profile of a mashed-up US fighter, created “out of boredom”. The original idea was called F-21C, and it was to be a domestic successor to the IAI Kfirs which had been used by the US as aggressor aircraft in USN and USMC service for a few years.

As a weird(?) coincidence I had many of the necessary ingredients for this fictional aircraft in store, even though some parts and details were later changed. This model here is an interpretation of the original design. The idea was spun further, and the available parts that finally went into the model also had some influence on design and background.

I thank nighthunter for sharing the early ideas, inviting me to take the design to the hardware stage (sort of…) and adapting my feedback into new design sketches, too, which, in return, inspired the model building process.

Well, what went into this thing? To cook up a F-24 à la Dizzyfugu you just need (all in 1:72):

● Fuselage from a Hasegawa X-29, including the cockpit and the landing gear

● Fin and nose cone from an Italeri F-16A

● Inner wings from a (vintage) Hasegawa MiG-21F

● Outer wings from a F-4 (probably a J, Hasegawa or Fujimi)

The wing construction deviates from nighthunter’s original idea. The favorite ingredients would have been F-16XL or simple Mirage III wings, but I found the composite wing to be more attractive and “different”. The big F-16XL wings, despite their benefit of a unique shape, might also have created scale/size problems with a F-20 style fuselage? So I built hybrid wings: The MiG-21 landing gear wells were filled with putty and the F-4 outer wings simply glued onto the MiG inner wing sections, which were simply cut down in span. It sounds like an unlikely combo, but these parts fit together almost perfectly! In order to hide the F-4 origins I modified them to carry wingtip launch rails, though, which were also part of nighthunter’s original design.

The AAW technology detail mentioned in the background came in handy as it explains the complicated wing shape and the fact that the landing gear retracts into the fuselage, not into the wings, which would have been more plausible… Anyway, there’s still room for a simpler export version, with Mirage III or Kfir C.2/7 wings, and maybe canards?

Using the X-29 as basis also made fitting the new wings onto the area-ruled fuselage pretty easy, as I could use the wing root parts from the X-29 to bridge the gap. The original, forward-swept wings were just cut away, and the remains used as consoles for the new hybrid delta wings. Took some SERIOUS putty work, but the result is IMHO fine.

The bigger/square X-29 air intakes were taken over, and they change the look of the aircraft, making it look less F-5-ish than a true F-20 fuselage. For the same reason I kept the large fairing at the fin base, combining it with a bigger F-16 tail, though, as a counter-balance to the new, bigger wings. Again, the F-16 fin was/is part of nighthunter’s idea, so the model stays true to the original concept.

For the same reason I omitted the original X-29 nose, which is rather pointy, sports vanes and a large sensor boom. The F-16 nose was a plausible choice, as the AN/APG-80 is also carried by late Fighting Falcons, and its shape fits well, too.

All around the hull, some small details like radar warning sensors, pitots and air scoops were added. Not really necessary, but such thing add IMHO to the overall impression of such a fictional aircraft beyond the prototype stage.

Cockpit and landing gear were taken OOB, I just added a pilot figure and slightly modified the seat.

The ordnance was puzzled together from the scrap box, the AIM-9Ls come from the same F-4 kit which donated its outer wings, the AIM-120s come from an Italeri NATO weapons kit. The drop tanks belong to an F-16.

Painting and markings:

At first I considered an F-24I in IAF markings, or even a Japanese aircraft, but then reverted to one of nighthunter’s initial, simple ideas: an USAF aircraft in the “Hill II” paint scheme (F-16 style), made up from three shades of gray (FS 36118, 36270 and 36375) with low-viz markings and stencils. Dutch/Turkish NF-5A/Bs in the “Hill II” scheme were used as design benchmarks, too. It’s a simple livery, but on this delta wing aircraft it looks pretty interesting. I used enamels, what I had at hand: Humbrol 127 and 126, and Modelmaster's 1723.

A light black ink wash was applied, in order to em,phasize the engraved panel lines, in contrast to that, panels were manually highlighted through dry-brushed, lighter shades of gray (Humbrol 27, 166 and 167).

“Hill II” also adds to a generic, realistic touch for this whif. Doing an exotic air force thing is rather easy, but creating a convincing whif for a huge military machinery like the USAF’s takes more subtlety, I think.

The cockpit was painted in medium Gray (Dark Gull Grey, FS 36231, Humbrol 140), as well as the radome. The landing gear and the air intakes were painted white. The radome was painted with Revell 47 and dry-brushed with Humbrol 140.

Decals were puzzled together from various USAF aircraft, including sheets from an Airfix F-117, an Italeri F-15E and even an Academy OV-10D.

Tadah: a hardware tribute to an idea, born from boredom - and the aircraft does not look even bad at all? What I wanted to achieve was to make the F-24 neither look like a F-20, nor a Saab Gripen clone, as the latter comes close in overall shape, size and design.

Some background:

A vanship is a type of flying machine from the animated series Last Exile. It is often referred to as a "flying boat" in that it does not fly by means of aerodynamics like planes do, but rather by floating on the air and propelling itself through the use of a substance known as "Claudia" (see below).

All vanships in the series were rendered as 3D images, a hallmark of Japanese animation studio Gonzo, makers of such series as Vandread and Blue Submarine No. 6.

The kit and its assembly:

I love the Vanships from Last Exile - even though I have never seen the series.

While these vehicles appear as retro stuff, they are very original and unique in look and feel - a modeler's dream if you are into scratchbuilding and kitbashing. There's also a 1:72 Vanship kit available (actually, in two versions) from Hasegawa, but it is IMHO overpriced. And there are so many different Vanships in the series that it is a shame that not more of them have been kitted, scratched, or at least used as a source of modelling inspiration.

The latter's the case here. I had a scratched Vanship on the agenda for a long time and also a basic idea with what I'd start, but it took a SF racing GB at phoxim.de ( a German SF model building forum) to make a move.

I wanted a small and fast single seater, and this evolved through the GB into a Racer with a more prominent engine unit and a rather purposeful livery instead of bright colors. But the basic concept was retained: originally, the plan was to use a 1:72 F4U as fuselage basis, and I had the idea to integrate some parts of a 1:43 Citroen 11CV from Heller, e. g. its grill and bonnet.

The F4U is the SMER kit, and it has the benefit of having separate wings for a folded display. The fin was cut off and the landing gear wells covered.

The cockpit opening was slightly enlarged in order to take a 1:48 Japanese WWII resin pilot and a seat from the 1:43 11CV - pretty cramped, but it worked and looks good. Only the wind screen of the OOB F4U canopy was used, as well as the original dashboard.

Most work was done on the outside, though. The first problem turned up when I realized that the 11CV bonnet could hardly be mated with the F4U. As a plan B I found a cover for the brush head of a Philipps electric toothbrush in my donor bank - a bit too high and narrow, but overall a unique addition and characteristic nose for my creation!

The landing gear comes from an Amodel Ju-87A - together with the drooped F4U inner wings the result looked a bit stalky at first, but the Vanship still needed its engines.

As a racer, I went for double power, and the long pods that carry the propulsion system were scratched from several non-model-kit parts:

- Front comes from a Revell 1:32 AH-64 Apache, its engines

- The intakes come from a Matchbox Gloster Meteor NF.14

- The "ring" consists of wheel parts from the Heller 11CV

- The conic isolators are ball pen grips, cut to size and closed with tank wheels on both ends

- The fins are plastic knives, primarily the blades and parts of the handles

In between these engine pods, which are only held under the wings and stabilized internally through steel wire, a generator pod from a 1:72 Matchbox EA-6B fills the void. It also holds a characteristic "knife" under the front grill - again carved from the handle of the plastic knives.

In order to blend the changes in fuselage shape and diameter and create a kind of Cord-style grill I added three styrene strips which were wrapped around the nose, the upper line reaching back to the cockpit - a kind of 3D rally stripe that also streches the shape.

Some air scoops and surface details were added, made from styrene, and stiff cable was used under the front fuselage to create hoses between the bonnet with the Claudia reactor and the engines.

I was frequently tempted to add more things and details or decoration, but found that a rather clean look would better suit a dedicated racer Vanship - the Stutz Blackhawk land speed record car was a vague benchmark.

Painting and markings:

I wanted to keep things simple and dry. Before this turned into a racer I considered several colors like pale blue, a greyish-green, British Racing Green or Crimson, with ivory trim. Anyway, I rejected this in favir of a pure, bare metal finish. I even did not add colorful stripes - the only "color" comes from the mechanical parts (ivory and dark brown on the engine pods, the idea was to add an isolator impression) and the small sponsor decals.

The kit initially received a basic coat of Revell's acrylic Aluminum, and onto that panels/field with several Metallizer tones (Steel, Magnesium, Titanium, polished Aluminum) were added. On top of that, the whole thing received a rubbing with grinded graphite - intensifying the metal shine and also weathering the vehicle.

The pilot received a rather conservatie outfit, with a brown leather jacket - matching the overall style of the Vanship. Some engine parts (e. g. the blades and the knife under the nose) were painted with a mix of Steel Metallizer and Gold. The cockpit interior was painted in RLM 02.

The markings were puzzled together. The start number '24' in that nice retro type comes from an 1:72 Airfix Il-2, the black disc below is from a slot car aftermarket sheet. The many sponsor stickers come mostly from an 1:72 Su-27 demonstrator aircraft sheet from Begemot - with their cyrillic typo they blend well into the Last Exile look and feel (where Greek/Cyrillic typo pops up).

Finally, the kit received a coat with acrylic gloss varnish, while the anti glare panel in front of the windscreen became matt.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

How it came to be:

It has been a long time since I built a "real" airplane kit, and this one here is a one-of-a-kind. After a bleak phase with lots of reading about German WWII airplane projects I found a spark to fire up a project I kept in the back of my mind for a long time: building one of these semi-fictional WWII airplanes from scratch. These astonishing designs were on the drawing boards at their time and rarely made it beyond that. Only a few reached prototype status at the end of the war, but today these partly weird designs are the basis of today's Luft '46 model kit genre: What-if airplanes, based on sketches, construction plans and pure speculation, in the case the war would have gone on.

At this point I want to make clear that this kit has NO political background. It is not even intended, and any Nazi symbolism is intentionally avoided and rejected. It is rather a hommage to an impressive design and, from my personal point of view, pure science fiction, based on vague historic facts.

Some historic background on this plane:

This plane is a Focke-Wulf study from 1941 for a heavy fighter. It was developes shortly after the Fw 190 introduction and surely influenced by the twin-boom Fw 189 reconnaissance aircraft, which became very popular due to its high agility, stable flight characteristics and toughness against enemy fire. The small "Flitzer" turbine engine fighter will surely also have had some impact, since it was on Focke Wulf's drawing boards in 1943, too.

This beast here would have been a much larger airplane, though: a heavy, high performance fighter built around the potent BMW 803 engine: a 28 cylinder, liquid-cooled radial engine in the 4.000 hp output range - comparable to the P&W-R-4360 Wasp Major engine (the so-called "corncob") which actually found its way into the Vought F2G Corsair but "just" put out 3.000 hp.

For reference, this Focke Wulf design was quite comparable to the US American XP-54, both in design and performance

The Focke Wulf fighter never received an official designation, and saw some mutation in the course of 1943. Even though the basic layout as a twin-boom, single pusher engine airplane with a tricycle landing gear was retained, the radiator placements, wing and tail shape changed.

From the original 1941 annular radiator design (a ring opening around the central fuselage), the arrangement was modified in April 1943 to a single drum radiator in the nose and, alternatively, twin drum radiators in the front ends of the tailbooms. The latter design is the layout I chose for my model, or better: where I ended up (see below).

Valuable sources:

Walter Schick, Ingolf Meyer: Luftwaffe Secret Projects, Fighters 1939-1945, Hinckley, 2005 (this is an English translation of the original German edition, Stuttgart, 1994, but with many colored illustrations added).

Sundin, Claes; Bergstroem, Christer: Deutsche Jaqgdflugzeuge 1939-1945 in Farbprofilen, Bonn, 1999.

www.luft46.com - a great online institution which offers many facts, information and artwork about secret German WWII airplane designs like this one - you can find a nice CG graphic of the initial 1941 design of this machine there.

wp.scn.ru - "Wings Palette" - a Russian website which collects plane profiles and some details about the respective machine's history. A nice reference archive, since a lot information concerning colors can be found there, too. Handling is poor, though. But once you get it, it is a great model kit building source.

The construction:

Anyway, this Focke Wulf design never left the drawing board, and this model here is just an interpretation of the vague design sketches I found in literature. It is also limited by the use of various existing kits as a kitbashing basis. My idea was to build a what-if version of the airplane if it had entered service, which would allow some deviations from the blueprints and also leave some room for a semi-realistic Luftwaffe livery.

What went into this model:

Grumman Panther (1:72, Matchbox/Revell):

- Main body,

- Parts of the outer wings

- Cockpit interior

- Canopy

Lockheed P-38E Lightning (1:72; Airfix):

- Tailbooms

- Horizontal fin

- Cockpit parts

- Landing gear

- Propeller spinners

Messerschmidt Me 262 A-2a (1:72, Hobby Master):

- Outer wings

- Wheels

Dornier Do 217N (1:72, Italeri):

- Engine cowling (rear central fuselage)

- Propellers

Other smaller donations:

- Kamow Ka-25 (1:72, Airfix): Vertical fins

- Chance Vought XF5U-1 (1:72, Hasegawa): Propeller spinners

- Chance Vought F4U (1:72, Matchbox): Engine block

- Messerschmidt Me-110 (1:72, Matchbox): Pilot figure

...and a lot of small stuff of unknown origin!

Laying the foundations

The basic choice for donation kits was quickly done: the central body would come from the Grumman F9F-4 Panther kit from Matchbox (currently released by Revell). Its overall proportions match well with the Focke Wulf design's central body and its size well, and the kit's construction with folded wings and a separate tail fin allowed easy modification for the pusher engine layout.

Originally, I wanted to use the Panther's jet intakes as radiator openings for a fictional (and more elegant) design alternative to the "official" radiator solutions, but I had to skip this idea (see below). The slender tailbooms come from a vintage Airfix P-38H kit and are much more slender than the Focke Wulf designs. Furthermore, the original Focke Wulf main landing gear looks as if it would retract inwards - which collided with my intial radiator ideas! Due to the pusher propeller, a much longer landing gear than the Panther's wpould be necessary, and this would have needed much bigger compartments. Enlarging them appeared too complex, and there's be actually no space with my inital wing root radiator idea. Therefore, I decided to retract the main wheels into the twin booms, and the P-38 pieces were just perfect for my ideas (and at hand). They'd undergo major modifications, though.

The twin booms were to be mounted onto the Panther's inner wings, and from there the rest of the model design would come when the parts were needed or available, since matching proportions for a balanced look is an important aspect when you build from scratch - a lesson I learned through varioius mecha bashings and modifications. I had some plans though: for the outer wings, for instance, I considered straight wings from a Fw 190 or parts from a Do 335 "Arrow", since these are slightly swept and would match the original drawings quite well.

The body parts get assembled

Work started straightforward with the tailbooms: they needed total cleaning, so that the P-38 look would disappear as much as possible: intercooolers and turbochargers had to go, and the engines were to "disappear", too. The Airfix kit is pretty old and clumsy, but offers massive material to work with. Another positive aspect is that the main landing gear compartments are complete parts, including the doors and all the inside. A neat arrangement which would later allow a switch between extended and retracted wheels!

The Panther's fuselage was cut open at the rear end to hold the BMW 803 engine, which requiered a new cowling. This came from a Dornier Do 217 with BMW 801 engines from Italeri, the BMW 803 dummy inside comes from a Matchbox F4U kit. The diameters of both segments were pretty equal and were easily merged with putty.

The Panther's front end was taken as it is, including the cockpit. The latter is actually very detailed for a Matchbox kit, with side consoles, a dashboard with instruments and even steering stick is included. I just fitted a better seat and a WWII pilot figure, which received an oxygen mask and its head was turned left for a more vivid look.

Since the front wheel had to be much longer than the Panther pieces I decided to use the P-38 front landing gear. Consequently, I enlarged its compartment (towards the nose, with a transplanted interior) and moved the Panther's nose guns from their original low position upwards. The kit's nose was filled with lots of lead in order to ensure a good weight on the front wheel for free standing on its tricycle undercarriage.

The BMW 803's contraprops had to be built from scratch. The basis were two leftover three-bladed rotors from the aforementioned Do 217 Italeri kit (they had just the correct diameter!) for the static display version, and two transparent plastic discs of the same diameter in order to mimic running propellers for photo shooting purposes in flight.

The spinners were a nightmare, though. They come from a wrecked 1:72 Hasegawa kit of a Chance Vought XF5U-1 (The "Flying Pancake"). Cut into three pieces, the three-bladed props were implanted into the spinner segments and a metal axis inserted, so that the propellers can be moved and interchanged. A plastic tube inside of the engine dummy is the respective adapter and offers a stable hold.

Trouble! ...and even more trouble!

As rough work progressed, some fundamental problems became obvious:

a) the P-38 booms were too long at their front, and their diameter was much too large. Cutting the front ends off did not help much, since I would have had to create new front covers/noses from putty and their bulky shape would look very unsinspired - way off of the Focke Wulf design! Hence, I finally decided to switch my personal design plan from the wing root intake arrangement to the authetic twin drum radiator layout from April 1943.

The Panther's air intakes would be totally closed, leaving pretty "fat" wing roots of high thickness. But since armament was supposed to be loacted in both the nose and wing roots of this machine (see below), this offered a good chance to cover the mess up a little.

Finding something to act as drum radiators was another problem that followed suit! At first I thought I'd become happy with two leftover engines from a Matchbox PB4-Y2 Privateer in 1:72 scale. These are/were actually Twin Wasp radial engines, but their diameter, the grates inside and their cooling flaps made them suited for my kit. They fitted well, but it just did not look right (see some of the WIP pics).

Heavy-hearted I skipped this approach and also built the drums radiators from scratch. I finally found some good parts in model railraod equipment: in a HO Modulars set from Cornerstone with various roof detils for industrial buildings, I found two nice "tubs" (parts for motorized vents) which were merged with lots of putty and sanding onto the clipped tail booms. The radiator arrangement inside was made up from parts from a 1:72 scale Panzer IV(!) and from the Airfix P-38 spinners. The cooling flaps are very thin Plasticard. Comparing this solution with the original plane sketches, the result looks convicing and more "realistic" than originally planned! Whew...

b) The wing root/twin boom area was another source of headaches, since I had to merge parts that were never supposed to meet, in places even less intended for construction. But a mini drill with a diamond cutter and epoxy putty are wonderful things!

Spacers between the Panther hull and the booms had to be made, closing a 5mm gap on each side because the propeller needed this much space between the booms. Parts of the leftover Panther kit's outer wings were the basis, and the original P-38's horizonmtal fin could be used, too. Sound simple, but almost the complete area had to be remodeled with putty.

The big picture becomes clear(er)

Now that the main part of the body was finished, the final missing pieces could be added and first details defined.

For the outer wings, I finally settled on parts from a Me 262 from Hobby Boss. These have the advantage that they are massive pieces (not two halves, as usual) and that the Me 262's engine nacelles could easily be left away. As a result, I had two thin, slightly swept wings which could easily be cut into the right length for my project. Fixing them to the P-38 tail booms was another story, though!

The original Focke Wulf design uses simpler and thicker wings, which look very similar to the Do 335. But I justify my choice with the advancements in aerodynamics since the 1943 revision of the original plane's design and the effective introduction of the Me 262 into production and service. Using these parts or a similar design for high speeds in another airplane appears plausible in order to get this machine into the air quickly, and the slender Me 262 wings blend well with the angles of the inner wings from the Panther.

The vertical fins also puzzled me for some time. The round P-38 fins had definitively to go, but the different Focke Wulf design sketches did not show a definitive vertical fin shape or arrangement. Since I wanted an old-fashioned, not jet-like look, I went for parts from the scrap box again. And, believe it or not, the model's retro-looking vertical fins actually come from a helicopter: from an antique 1:72 scale Kamow Ka-25 "Hokum" from Airfix!

The main landing gear was taken from the P-38, but the wheels come from the scrap box. I am not sure where these come from - they could come from a Douglas Skyknight from Matchbox. Since the Airfix kit's contruction offers the main landing gear to be inserted as complete units, I also used the covers for the retracted gear for the photo shootings, for some pictures in flight.

Armament:

Being a heavy daylight fighter, I stuck to the original 1941 design armament: four fixed 20mm MG 151/20 in the nose, plus "provision for two larger calibre cannons", plus two or four machine guns installed in the wing-roots. The firepower would have been massive!

For my model I adopted the four 20mm guns in the upper nose and added four 30mm MK 103 cannons in the wing roots. Since these offered now lots of space, this arrangement would make the thick wing and the blended bodywork plausible, without looking exagerrated.

The nose guns are just thin polystyrol sticks, the larger calibre guns are syringe needles cut to length with the beloved diamond cutter.

But beyond the guns, I also wanted to add some of the experimental air-to-air weapons that were under development against allied bomber forces in 1945. Among those was the world's probably first guided AAM, the Kramer X-4: a relatively small, wire-guided missile with a range of just 3 miles and a contact detonator.

Tests with this innovative weapon were conducted in the late war months, and the X-4 was suppoesed to be carried by e. g. Me 262 fighters. The targeting procedure would easily overstress a single pilot's capabilities, though, esp. in the heat of a bomber formation attack at high speeds. Therefore, field tests were rather performed by multi-seated planes like the Ju 88, and the X-4 did not enter serious service.

But this missile would have been a plausible weapon for this Focke Wulf design, and so two X-4s found their way with starting racks under my model's wings.

Each missile consists of nine parts and had to be built from scratch. The body is a streamlined, modern 250 lbs. Mk 81 bomb, the wings were cut from thin polystyrol. The wire spools on the wing tips are actually parts from a HO scale fence(!), the acoustic detonator nose are leftover tool handles from a 1:35 scale tank kit.

Livery and markings:

Being a semi-fictional design that never left the drawing board, I tried to implement a "typical" late war Luftwaffe livery. Benchmarks were Me 262 fighter paint schemes, as well as late Fw 190D-9 and Ta-152 machines. Since the plane itself was already centre of attraction, the paint job should be rather subtle, yet authentic.

All interior areas (cockpit, engine, landing gear) were painted in RLM 02. For the outside I ended up with a basic livery in RLM 74/75/76, using colors from Testor's Military Models and Figures range, 2071, 2084, 2085, 2086.

The upper splinter scheme with faded/mottled fuselage sides (which includes RLM 02 in order to create a soft color transition from the dark upper sides into the light RLM 76 underneath, a common practice in field conditions) was derived from a Me 262 profile. This machine also contributed the dark green (RLM 82) color fields on the nose and other fuselage parts. These would not have been standard livery, I think, rather improvised in the field. But this subtle detail prevents the plane from being all grey-in-grey.

The markings come from various decal sheets and were a kind of challenge. I intended to mark this machine as being part of an Erprobungskommando (test unit), or EKdo or EK, for short. But these squadrons would not have special designations, though. Prototypes woud carry a "V"-number (for Versuch/test), but I wanted a machine already in service. So I made up a semi-fictional squadron marking as a part of the late Reich defense.

Typical markings are the colored band at the rear fuselage, its color and scheme being associated with certain Jagdgeschwader (JG) wings, dedicated to interception tasks. The red tail band(s) denote this machine as being part of JG 1, which comprised several Staffeln/groups and squadrons with individual emblems. The JG 1's red tail band would not have been used in the late war years in real life, but, hey, it LOOKS good, and we're finally doing fictional things here! As a side note, JG 1 was the only wing (to be exact: 1./JG 1 and later, in April 1945 III./JG 1) to use the He 162 Salamender jet fighter, so JG 1 appears to be a general plausible choice for this fictional Focke Wulf fighter.

The red wave symbol should, AFAIK, mark the 2nd group of that wing, but it could also be a symbol for the pilot's rank - that's quite obscure and had not been handled consistently. For squadron markings I setlled on 6./JG 1 - the red wyvern was this group's squadron emblem.

Decals come from aftermarkets sheet from TL-Modellbau (superb quality) and others i e. from a MiG-25 from Hasegawa (the red bort number) or the leftover decal sheet of the Hobby Boss Me 262 (mostly stencellings and warning signs).

After application of the decals on the semi-matte paint, everything was sealed under matte varnish.

The X-4 missiles were painted in a color livery I found for a museum X-4. Other test missiles were painted in black and white, checkered. Not sure if the field use missiles would have looked that bright, but for a test unit, the blank fuselage and the hi-vis, orange fins look just right and make a nice contrast to the dull rest of the machine.

Finally...

Lots of work, but the result looks better and more harmonious than I expected. O.K., the Panther's fuselage and cockpit deviate from the Focke Wulf sketches - but the plane I built would have had entered service 3 years after its redesign to the drum radiator design, and details like the bubble canopy or more modern weaponry would have certainly been incorporated.

The finish is not as good as a kit "out of the box", but considering the massive putty work, this machine looks quite good :)

And, after all, it is a fictional design!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

In the late 1970s the Mikoyan OKB began development of a hypersonic high-altitude reconnaissance aircraft. Designated "Izdeliye 301" (also known as 3.01), the machine had an unusual design, combining a tailless layout with variable geometry wings. The two engines fueled by kerosene were located side by side above the rear fuselage, with the single vertical fin raising above them, not unlike the Tu-22 “Blinder” bomber of that time, but also reminiscent of the US-American SR-71 Mach 3 reconnaissance aircraft.

Until today, only the two prototypes have been known to exist, and it is assumed – had the type entered service – that the long-range fighter had received the official designation "MiG-41".

General characteristics:

Crew: 2 (Pilot, weapon system officer)

Length (incl. pitot): 93 ft 10 in (28.66 m)

Wingspan:

- minimum 10° sweep: 69 ft 4 in (21.16 m)

- maximum 68° sweep: 48 ft 9 in (14,88 m)

Height: 23 ft 1 1/2 in (7,06 m )

Wing area: 1008.9 ft² (90.8 m²)

Weight: 88.151 lbs (39.986 kg)

Performance:

Maximum speed:

- Mach 3.2 (2.050 mph (3.300 km/h) at height

- 995 mph (1.600 km/h) supercruise speed at 36,000 ft (11,000 m)

- 915 mph (1.470 km/h) at sea level

Range: 3.705 miles (5.955 km) with internal fuel

Service ceiling: 75.000 ft (22.500 m)

Rate of climb: 31.000 ft/min (155 m/s)

Engine:

2x Soloviev D-30F6 afterburning turbofans with a dry thrust of 93 kN (20,900 lbf) each

and with 152 kN (34,172 lbf) with full afterburner.

Armament:

Internal weapons bay, main armament comprises a flexible missile load; basic ordnance of 4x K-100 ultra long range AAMs plus 2x R-73 short-range AAMs: other types like the R-27, R-33, R-60 and R-77 have been carried and tested, too, as well as podded guns on internal and external mounts. Alternatively, the weapon bay can hold various sensor pallets.

Four hardpoints under the wing roots, the outer pair “wet” for drop tanks of up to 3.000 l capacity, ECM pods or a buddy-buddy refueling drogue system. Maximum payload mass is 9000 kg.

The kit and its assembly

The second entry for the 2017 “Soviet” Group Build at whatifmodelers.com – a true Frankenstein creation, based on the scarce information about the real (but never realized) MiG 301 and 701 projects, the Suchoj T-60S, as well as some vague design sketches you can find online and in literature.

This one had been on my project list for years and I already had donor kits stashed away – but the sheer size (where will I leave it once done…?) and potential complexity kept me from tackling it.

The whole thing was an ambitious project and just the unique layout with a massive engine nacelle on top of the slender fuselage instead of an all-in-one design makes these aircraft an interesting topic to build. The GB was a good motivator.

“My” fictional interpretation of the MiG concepts is mainly based on a Dragon B-1B in 1:144 scale (fuselage, wings), a PM Model Su-15 two seater (donating the nose section and the cockpit, as well as wing parts for the fin) and a Kangnam MiG-31 (for the engine pod and some small parts). Another major ingredient is a pair of horizontal stabilizers from a 1:72 Hasegawa A-5 Vigilante.

Fitting the cockpit section took some major surgery and even more putty to blend the parts smoothly together. Another major surgical area was the tail; the "engine box" came to be rather straightforward, using the complete rear fuselage section from the MiG-31 and adding the intakes form the same kit, but mounted horizontally with a vertical splitter.

Blending the thing to the cut-away tail section of the B-1 was quite a task, though, since I not only wanted to add the element to the fuselage, but rather make it look a bit 'organic'. More than putty was necessary, I also had to made some cuts and transplantations. And after six PSR rounds I stopped counting…

The landing gear was built from scratch – the front wheel comes mostly from the MiG-31 kit. The central bogie and its massive leg come from a VEB Plasticart 1:100 Tu-20/95 bomber, plus some additional struts. The outriggers are leftover landing gear struts from a Hobby Boss Fw 190, mated with wheels which I believe come from a 1:200 VEB Plasticart kit, an An-24. Not certain, though. The fairings are slender MiG-21 drop tanks blended into the wing training edge. For the whole landing gear, the covers were improvised with styrene sheet, parts from a plastic straw(!) or leftover bits from the B-1B.

The main landing gear well was well as the weapons’ bay themselves were cut into the B-1B underside and an interior scratched from sheet and various leftover materials – I tried to maximize their space while still leaving enough room for the B-1B kit’s internal VG mechanism.

The large missiles (two were visible fitted and the rotary launcher just visibly hinted at) are, in fact, AGM-78 ‘Standard’ ARMs in a fantasy guise. They look pretty Soviet, though, like big brothers of the already not small R-33 missiles from the MiG-31.

While not in the focus of attention, the cockpit interior is completely new, too – OOB, the Su-15 cockpit only has a floor and rather stubby seats, under a massive single piece canopy. On top of the front wheel well (from a Hasegawa F-4) I added a new floor and added side consoles, scratched from styrene sheet. F-4 dashboards improve the decoration, and I added a pair of Soviet election seats from the scrap box – IIRC left over from two KP MiG-19 kits.

The canopy was taken OOB, I just cut it into five parts for open display. The material’s thickness does not look too bad on this aircraft – after all, it would need a rather sturdy construction when flying at Mach 3+ and withstanding the respective pressures and temperatures.

Painting

As a pure whif, I was free to use a weirdo design - but I rejected this idea quickly. I did not want a garish splinter scheme or a bright “Greenbottle Fly” Su-27 finish.

With the strange layout of the aircraft, the prototype idea was soon settled – and Soviet prototypes tend to look very utilitarian and lusterless, might even be left in grey. Consequently, I adapted a kind of bare look for this one, inspired by the rather shaggy Soviet Tu-22 “Blinder” bombers which carried a mix of bare metal and white and grey panels. With additional black leading edges on the aerodynamic surfaces, this would create a special/provisional but still purposeful look.

For the painting, I used a mix of several metallizer tones from ModelMaster and Humbrol (including Steel, Magnesium, Titanium, as well as matt and polished aluminum, and some Gun Metal and Exhaust around the engine nozzles, partly mixed with a bit of blue) and opaque tones (Humbrol 147 and 127). The “scheme” evolved panel-wise and step by step. The black leading edges were an interim addition, coming as things evolved, and they were painted first with black acrylic paint as a rough foundation and later trimmed with generic black decal stripes (from TL Modellbau). A very convenient and clean solution!

The radomes on nose and tail and other di-electric panels became dark grey (Humbrol 125). The cockpit tub was painted with Soviet Cockpit Teal (from ModelMaster), while the cockpit opening and canopy frames were kept in a more modest medium grey (Revell 57). On the outside of the cabin windows, a fat, deep yellow sealant frame (Humbrol 93, actually “Sand”) was added.

The weapon bay was painted in a yellow-ish primer tone (seen on pics of Tu-160 bombers) while the landing gear wells received a mix of gold and sand; the struts were painted in a mixed color, too, made of Humbrol 56 (Aluminum) and 34 (Flat White). The green wheel discs (Humbrol 131), a typical Soviet detail, stand out well from the rather subdued but not boring aircraft, and they make a nice contrast to the red Stars and the blue tactical code – the only major markings, besides a pair of MiG OKB logos under the cockpit.

Decals were puzzled together from various sheets, and I also added a lot of stencils for a more technical look. In order to enhance the prototype look further I added some photo calibration markings on the nose and the tail, made from scratch.

A massive kitbashing project that I had pushed away for years - but I am happy that I finally tackled it, and the result looks spectacular. The "Firefox" similarity was not intended, but this beast really looks like a movie prop - and who knwos if the Firefox was not inspired by the same projects (the MiG 301 and 701) as my kitbash model?

The background info is a bit lengthy, but there's some good background info concerning the aforementioned projects, and this aircraft - as a weapon system - would have played a very special and complex role, so a lot of explanations are worthwhile - also in order to emphasize that I di not simply try to glue some model parts together, but rather try to spin real world ideas further.

Mighty bird!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

In the late 1970s the Mikoyan OKB began development of a hypersonic high-altitude reconnaissance aircraft. Designated "Izdeliye 301" (also known as 3.01), the machine had an unusual design, combining a tailless layout with variable geometry wings. The two engines fueled by kerosene were located side by side above the rear fuselage, with the single vertical fin raising above them, not unlike the Tu-22 “Blinder” bomber of that time, but also reminiscent of the US-American SR-71 Mach 3 reconnaissance aircraft.

Until today, only the two prototypes have been known to exist, and it is assumed – had the type entered service – that the long-range fighter had received the official designation "MiG-41".

General characteristics:

Crew: 2 (Pilot, weapon system officer)

Length (incl. pitot): 93 ft 10 in (28.66 m)

Wingspan:

- minimum 10° sweep: 69 ft 4 in (21.16 m)

- maximum 68° sweep: 48 ft 9 in (14,88 m)

Height: 23 ft 1 1/2 in (7,06 m )

Wing area: 1008.9 ft² (90.8 m²)

Weight: 88.151 lbs (39.986 kg)

Performance:

Maximum speed:

- Mach 3.2 (2.050 mph (3.300 km/h) at height

- 995 mph (1.600 km/h) supercruise speed at 36,000 ft (11,000 m)

- 915 mph (1.470 km/h) at sea level

Range: 3.705 miles (5.955 km) with internal fuel

Service ceiling: 75.000 ft (22.500 m)

Rate of climb: 31.000 ft/min (155 m/s)

Engine:

2x Soloviev D-30F6 afterburning turbofans with a dry thrust of 93 kN (20,900 lbf) each

and with 152 kN (34,172 lbf) with full afterburner.

Armament:

Internal weapons bay, main armament comprises a flexible missile load; basic ordnance of 4x K-100 ultra long range AAMs plus 2x R-73 short-range AAMs: other types like the R-27, R-33, R-60 and R-77 have been carried and tested, too, as well as podded guns on internal and external mounts. Alternatively, the weapon bay can hold various sensor pallets.

Four hardpoints under the wing roots, the outer pair “wet” for drop tanks of up to 3.000 l capacity, ECM pods or a buddy-buddy refueling drogue system. Maximum payload mass is 9000 kg.

The kit and its assembly

The second entry for the 2017 “Soviet” Group Build at whatifmodelers.com – a true Frankenstein creation, based on the scarce information about the real (but never realized) MiG 301 and 701 projects, the Suchoj T-60S, as well as some vague design sketches you can find online and in literature.

This one had been on my project list for years and I already had donor kits stashed away – but the sheer size (where will I leave it once done…?) and potential complexity kept me from tackling it.

The whole thing was an ambitious project and just the unique layout with a massive engine nacelle on top of the slender fuselage instead of an all-in-one design makes these aircraft an interesting topic to build. The GB was a good motivator.

“My” fictional interpretation of the MiG concepts is mainly based on a Dragon B-1B in 1:144 scale (fuselage, wings), a PM Model Su-15 two seater (donating the nose section and the cockpit, as well as wing parts for the fin) and a Kangnam MiG-31 (for the engine pod and some small parts). Another major ingredient is a pair of horizontal stabilizers from a 1:72 Hasegawa A-5 Vigilante.

Fitting the cockpit section took some major surgery and even more putty to blend the parts smoothly together. Another major surgical area was the tail; the "engine box" came to be rather straightforward, using the complete rear fuselage section from the MiG-31 and adding the intakes form the same kit, but mounted horizontally with a vertical splitter.

Blending the thing to the cut-away tail section of the B-1 was quite a task, though, since I not only wanted to add the element to the fuselage, but rather make it look a bit 'organic'. More than putty was necessary, I also had to made some cuts and transplantations. And after six PSR rounds I stopped counting…

The landing gear was built from scratch – the front wheel comes mostly from the MiG-31 kit. The central bogie and its massive leg come from a VEB Plasticart 1:100 Tu-20/95 bomber, plus some additional struts. The outriggers are leftover landing gear struts from a Hobby Boss Fw 190, mated with wheels which I believe come from a 1:200 VEB Plasticart kit, an An-24. Not certain, though. The fairings are slender MiG-21 drop tanks blended into the wing training edge. For the whole landing gear, the covers were improvised with styrene sheet, parts from a plastic straw(!) or leftover bits from the B-1B.

The main landing gear well was well as the weapons’ bay themselves were cut into the B-1B underside and an interior scratched from sheet and various leftover materials – I tried to maximize their space while still leaving enough room for the B-1B kit’s internal VG mechanism.

The large missiles (two were visible fitted and the rotary launcher just visibly hinted at) are, in fact, AGM-78 ‘Standard’ ARMs in a fantasy guise. They look pretty Soviet, though, like big brothers of the already not small R-33 missiles from the MiG-31.

While not in the focus of attention, the cockpit interior is completely new, too – OOB, the Su-15 cockpit only has a floor and rather stubby seats, under a massive single piece canopy. On top of the front wheel well (from a Hasegawa F-4) I added a new floor and added side consoles, scratched from styrene sheet. F-4 dashboards improve the decoration, and I added a pair of Soviet election seats from the scrap box – IIRC left over from two KP MiG-19 kits.

The canopy was taken OOB, I just cut it into five parts for open display. The material’s thickness does not look too bad on this aircraft – after all, it would need a rather sturdy construction when flying at Mach 3+ and withstanding the respective pressures and temperatures.

Painting

As a pure whif, I was free to use a weirdo design - but I rejected this idea quickly. I did not want a garish splinter scheme or a bright “Greenbottle Fly” Su-27 finish.

With the strange layout of the aircraft, the prototype idea was soon settled – and Soviet prototypes tend to look very utilitarian and lusterless, might even be left in grey. Consequently, I adapted a kind of bare look for this one, inspired by the rather shaggy Soviet Tu-22 “Blinder” bombers which carried a mix of bare metal and white and grey panels. With additional black leading edges on the aerodynamic surfaces, this would create a special/provisional but still purposeful look.

For the painting, I used a mix of several metallizer tones from ModelMaster and Humbrol (including Steel, Magnesium, Titanium, as well as matt and polished aluminum, and some Gun Metal and Exhaust around the engine nozzles, partly mixed with a bit of blue) and opaque tones (Humbrol 147 and 127). The “scheme” evolved panel-wise and step by step. The black leading edges were an interim addition, coming as things evolved, and they were painted first with black acrylic paint as a rough foundation and later trimmed with generic black decal stripes (from TL Modellbau). A very convenient and clean solution!

The radomes on nose and tail and other di-electric panels became dark grey (Humbrol 125). The cockpit tub was painted with Soviet Cockpit Teal (from ModelMaster), while the cockpit opening and canopy frames were kept in a more modest medium grey (Revell 57). On the outside of the cabin windows, a fat, deep yellow sealant frame (Humbrol 93, actually “Sand”) was added.

The weapon bay was painted in a yellow-ish primer tone (seen on pics of Tu-160 bombers) while the landing gear wells received a mix of gold and sand; the struts were painted in a mixed color, too, made of Humbrol 56 (Aluminum) and 34 (Flat White). The green wheel discs (Humbrol 131), a typical Soviet detail, stand out well from the rather subdued but not boring aircraft, and they make a nice contrast to the red Stars and the blue tactical code – the only major markings, besides a pair of MiG OKB logos under the cockpit.

Decals were puzzled together from various sheets, and I also added a lot of stencils for a more technical look. In order to enhance the prototype look further I added some photo calibration markings on the nose and the tail, made from scratch.

A massive kitbashing project that I had pushed away for years - but I am happy that I finally tackled it, and the result looks spectacular. The "Firefox" similarity was not intended, but this beast really looks like a movie prop - and who knwos if the Firefox was not inspired by the same projects (the MiG 301 and 701) as my kitbash model?

The background info is a bit lengthy, but there's some good background info concerning the aforementioned projects, and this aircraft - as a weapon system - would have played a very special and complex role, so a lot of explanations are worthwhile - also in order to emphasize that I di not simply try to glue some model parts together, but rather try to spin real world ideas further.

Mighty bird!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

In the late 1970s the Mikoyan OKB began development of a hypersonic high-altitude reconnaissance aircraft. Designated "Izdeliye 301" (also known as 3.01), the machine had an unusual design, combining a tailless layout with variable geometry wings. The two engines fueled by kerosene were located side by side above the rear fuselage, with the single vertical fin raising above them, not unlike the Tu-22 “Blinder” bomber of that time, but also reminiscent of the US-American SR-71 Mach 3 reconnaissance aircraft.

Until today, only the two prototypes have been known to exist, and it is assumed – had the type entered service – that the long-range fighter had received the official designation "MiG-41".

General characteristics:

Crew: 2 (Pilot, weapon system officer)

Length (incl. pitot): 93 ft 10 in (28.66 m)

Wingspan:

- minimum 10° sweep: 69 ft 4 in (21.16 m)

- maximum 68° sweep: 48 ft 9 in (14,88 m)

Height: 23 ft 1 1/2 in (7,06 m )

Wing area: 1008.9 ft² (90.8 m²)

Weight: 88.151 lbs (39.986 kg)

Performance:

Maximum speed:

- Mach 3.2 (2.050 mph (3.300 km/h) at height

- 995 mph (1.600 km/h) supercruise speed at 36,000 ft (11,000 m)

- 915 mph (1.470 km/h) at sea level

Range: 3.705 miles (5.955 km) with internal fuel

Service ceiling: 75.000 ft (22.500 m)

Rate of climb: 31.000 ft/min (155 m/s)

Engine:

2x Soloviev D-30F6 afterburning turbofans with a dry thrust of 93 kN (20,900 lbf) each

and with 152 kN (34,172 lbf) with full afterburner.

Armament:

Internal weapons bay, main armament comprises a flexible missile load; basic ordnance of 4x K-100 ultra long range AAMs plus 2x R-73 short-range AAMs: other types like the R-27, R-33, R-60 and R-77 have been carried and tested, too, as well as podded guns on internal and external mounts. Alternatively, the weapon bay can hold various sensor pallets.

Four hardpoints under the wing roots, the outer pair “wet” for drop tanks of up to 3.000 l capacity, ECM pods or a buddy-buddy refueling drogue system. Maximum payload mass is 9000 kg.

The kit and its assembly

The second entry for the 2017 “Soviet” Group Build at whatifmodelers.com – a true Frankenstein creation, based on the scarce information about the real (but never realized) MiG 301 and 701 projects, the Suchoj T-60S, as well as some vague design sketches you can find online and in literature.

This one had been on my project list for years and I already had donor kits stashed away – but the sheer size (where will I leave it once done…?) and potential complexity kept me from tackling it.

The whole thing was an ambitious project and just the unique layout with a massive engine nacelle on top of the slender fuselage instead of an all-in-one design makes these aircraft an interesting topic to build. The GB was a good motivator.

“My” fictional interpretation of the MiG concepts is mainly based on a Dragon B-1B in 1:144 scale (fuselage, wings), a PM Model Su-15 two seater (donating the nose section and the cockpit, as well as wing parts for the fin) and a Kangnam MiG-31 (for the engine pod and some small parts). Another major ingredient is a pair of horizontal stabilizers from a 1:72 Hasegawa A-5 Vigilante.

Fitting the cockpit section took some major surgery and even more putty to blend the parts smoothly together. Another major surgical area was the tail; the "engine box" came to be rather straightforward, using the complete rear fuselage section from the MiG-31 and adding the intakes form the same kit, but mounted horizontally with a vertical splitter.

Blending the thing to the cut-away tail section of the B-1 was quite a task, though, since I not only wanted to add the element to the fuselage, but rather make it look a bit 'organic'. More than putty was necessary, I also had to made some cuts and transplantations. And after six PSR rounds I stopped counting…

The landing gear was built from scratch – the front wheel comes mostly from the MiG-31 kit. The central bogie and its massive leg come from a VEB Plasticart 1:100 Tu-20/95 bomber, plus some additional struts. The outriggers are leftover landing gear struts from a Hobby Boss Fw 190, mated with wheels which I believe come from a 1:200 VEB Plasticart kit, an An-24. Not certain, though. The fairings are slender MiG-21 drop tanks blended into the wing training edge. For the whole landing gear, the covers were improvised with styrene sheet, parts from a plastic straw(!) or leftover bits from the B-1B.

The main landing gear well was well as the weapons’ bay themselves were cut into the B-1B underside and an interior scratched from sheet and various leftover materials – I tried to maximize their space while still leaving enough room for the B-1B kit’s internal VG mechanism.

The large missiles (two were visible fitted and the rotary launcher just visibly hinted at) are, in fact, AGM-78 ‘Standard’ ARMs in a fantasy guise. They look pretty Soviet, though, like big brothers of the already not small R-33 missiles from the MiG-31.

While not in the focus of attention, the cockpit interior is completely new, too – OOB, the Su-15 cockpit only has a floor and rather stubby seats, under a massive single piece canopy. On top of the front wheel well (from a Hasegawa F-4) I added a new floor and added side consoles, scratched from styrene sheet. F-4 dashboards improve the decoration, and I added a pair of Soviet election seats from the scrap box – IIRC left over from two KP MiG-19 kits.

The canopy was taken OOB, I just cut it into five parts for open display. The material’s thickness does not look too bad on this aircraft – after all, it would need a rather sturdy construction when flying at Mach 3+ and withstanding the respective pressures and temperatures.

Painting

As a pure whif, I was free to use a weirdo design - but I rejected this idea quickly. I did not want a garish splinter scheme or a bright “Greenbottle Fly” Su-27 finish.

With the strange layout of the aircraft, the prototype idea was soon settled – and Soviet prototypes tend to look very utilitarian and lusterless, might even be left in grey. Consequently, I adapted a kind of bare look for this one, inspired by the rather shaggy Soviet Tu-22 “Blinder” bombers which carried a mix of bare metal and white and grey panels. With additional black leading edges on the aerodynamic surfaces, this would create a special/provisional but still purposeful look.

For the painting, I used a mix of several metallizer tones from ModelMaster and Humbrol (including Steel, Magnesium, Titanium, as well as matt and polished aluminum, and some Gun Metal and Exhaust around the engine nozzles, partly mixed with a bit of blue) and opaque tones (Humbrol 147 and 127). The “scheme” evolved panel-wise and step by step. The black leading edges were an interim addition, coming as things evolved, and they were painted first with black acrylic paint as a rough foundation and later trimmed with generic black decal stripes (from TL Modellbau). A very convenient and clean solution!

The radomes on nose and tail and other di-electric panels became dark grey (Humbrol 125). The cockpit tub was painted with Soviet Cockpit Teal (from ModelMaster), while the cockpit opening and canopy frames were kept in a more modest medium grey (Revell 57). On the outside of the cabin windows, a fat, deep yellow sealant frame (Humbrol 93, actually “Sand”) was added.

The weapon bay was painted in a yellow-ish primer tone (seen on pics of Tu-160 bombers) while the landing gear wells received a mix of gold and sand; the struts were painted in a mixed color, too, made of Humbrol 56 (Aluminum) and 34 (Flat White). The green wheel discs (Humbrol 131), a typical Soviet detail, stand out well from the rather subdued but not boring aircraft, and they make a nice contrast to the red Stars and the blue tactical code – the only major markings, besides a pair of MiG OKB logos under the cockpit.

Decals were puzzled together from various sheets, and I also added a lot of stencils for a more technical look. In order to enhance the prototype look further I added some photo calibration markings on the nose and the tail, made from scratch.

A massive kitbashing project that I had pushed away for years - but I am happy that I finally tackled it, and the result looks spectacular. The "Firefox" similarity was not intended, but this beast really looks like a movie prop - and who knwos if the Firefox was not inspired by the same projects (the MiG 301 and 701) as my kitbash model?

The background info is a bit lengthy, but there's some good background info concerning the aforementioned projects, and this aircraft - as a weapon system - would have played a very special and complex role, so a lot of explanations are worthwhile - also in order to emphasize that I di not simply try to glue some model parts together, but rather try to spin real world ideas further.

Mighty bird!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some Background:

During the 1950s, Hindustan Aircraft Limited (HAL) had developed and produced several types of trainer aircraft, such as the HAL HT-2. However, elements within the firm were eager to expand into the then-new realm of supersonic fighter aircraft. Around the same time, the Indian government was in the process of formulating a new Air Staff Requirement for a Mach 2-capable combat aircraft to equip the Indian Air Force (IAF). However, as HAL lacked the necessary experience in both developing and manufacturing frontline combat fighters, it was clear that external guidance would be invaluable; this assistance was embodied by Kurt Tank.

A radar upgrade, together with the introduction of better air-to-ai missiles with a higher range and look down/shoot down capability was considered but never carried out. Furthermore, the idea of a true HF-26 2nd generation variant, powered by a pair of Tumansky R-11F-300 afterburner jet engines (from the license-built MiG-21FLs), was dropped, too – even though this powerplant eventually promised to fulfill the Teer’s design promise of Mach 2 top speed. A total of only 82 HF-26s (including thirteen two-seat trainers with a lengthened fuselage and reduced fuel capacity, plus eight prototypes) were built. The last aircraft were retired from IAF service in 1988 and replaced with Mirage 2000 fighters procured from France that were armed with the Matra Super 530 AAM.

General characteristics:

Crew: 1

Length: 14.97 m (49 ft ½ in)

Wingspan: 9.43 m (30 ft 11 in)

Height: 4.03 m (13 ft 2½ in)

Wing area: 30.6 m² (285 sq ft)

Empty weight: 7,000 kg (15,432 lb)

Gross weight: 10,954 kg (24,149 lb) with full internal fuel

Max takeoff weight: 15,700 kg (34,613 lb) with external stores

Powerplant:

2× Tumansky RD-9 afterburning turbojet engines; 29 kN (6,600 lbf) dry thrust each

and 36.78 kN (8,270 lbf) with afterburner

Performance:

Maximum speed: 1,700 km/h (1,056 mph; 917 kn; Mach 1.6) at 11,000 m (36,000 ft)

1,350 km/h (840 mph, 730 kn; Mach 1.1) at sea level

Combat range: 725 km (450 mi, 391 nmi) with internal fuel only

Ferry range: 1,700 km (1,100 mi, 920 nmi) with four drop tanks

Service ceiling: 18,100 m (59,400 ft)

g limits: +6.5

Time to altitude: 9,145 m (30,003 ft) in 1 minute 30 seconds

Wing loading: 555 kg/m² (114 lb/sq ft)

Armament

6× hardpoints (four underwing and two under the fuselage) for a total of 2.500 kg (5.500 lb);

Typical interceptor payload:

- two IR-guided R-3 or R-60 air-to-air-missiles or

two PTB-490 drop tanks on the outer underwing stations

- two semi-active radar-guided ‚Saanp’ air-to-air missiles or two more R-3 or R-60 AAMs

on inner underwing stations

- two 500 l drop tanks or two gun pods with a 23 mm GSh-23L autocannon and 200 RPG

each under the fuselage

The kit and its assembly:

This whiffy delta-wing fighter was inspired when I recently sliced up a PM Model Su-15 kit for my side-by-side-engine BAC Lightning build. At an early stage of the conversion, I held the Su-15 fuselage with its molded delta wings in my hand and wondered if a shortened tail section (as well as a shorter overall fuselage to keep proportions balanced) could make a delta-wing jet fighter from the Flagon base? Only a hardware experiment could yield an answer, and since the Su-15’s overall outlines look a bit retro I settled at an early stage on India as potential designer and operator, as “the thing the HF-24 Marut never was”.

True to the initial idea, work started on the tail, and I chopped off the fuselage behind the wings’ trailing edge. Some PSR was necessary to blend the separate exhaust section into the fuselage, which had to be reduced in depth through wedges that I cut out under the wings trailing edge, plus some good amount of glue and sheer force the bend the section a bit upwards. The PM Model's jet exhausts were drilled open, and I added afterburner dummies inside - anything would look better than the bleak vertical walls inside after only 2-3 mm! The original fin was omitted, because it was a bit too large for the new, smaller aircraft and its shape reminded a lot of the Suchoj heavy fighter family. It was replaced with a Mirage III/V fin, left over from a (crappy!) Pioneer 2 IAI Nesher kit.

Once the rear section was complete, I had to adjust the front end - and here the kitbashing started. First, I chopped off the cockpit section in front of the molded air intake - the Su-15’s long radome and the cockpit on top of the fuselage did not work anymore. As a remedy I remembered another Su-15 conversion I did a (long) while ago: I created a model of a planned ground attack derivative, the T-58Sh, and, as a part of the extensive body work, I transplanted the slanted nose from an academy MiG-27 between the air intakes – a stunt that was relatively easy and which appreciably lowered the cockpit position. For the HF-26M I did something similar, I just transplanted a cockpit from a Hasegawa/Academy MiG-23 with its ogival radome that size-wise better matched with the rest of the leftover Su-15 airframe.

The MiG-23 cockpit matched perfectly with the Su-15's front end, just the spinal area behind the cockpit had to be raised/re-sculpted to blend the parts smoothly together. For a different look from the Su-15 ancestry I also transplanted the front sections of the MiG-23 air intakes with their shorter ramps. Some mods had to be made to the Su-15 intake stubs, but the MiG-23 intakes were an almost perfect fit in size and shape and easy to integrate into the modified front hill. The result looks very natural!

However, when the fuselage was complete, I found that the nose appeared to be a bit too long, leaving the whole new hull with the wings somewhat off balance. As a remedy I decided at a rather late stage to shorten the nose and took out a 6 mm section in front of the cockpit - a stunt I had not planned, but sometimes you can judge things only after certain work stages. Some serious PSR was necessary to re-adjust the conical nose shape, which now looked more Mirage III-ish than planned!

The cockpit was taken mostly OOB, I just replaced the ejection seat and gave it a trigger handle made from thin wire. With the basic airframe complete it was time for details. The PM Model Su-15s massive and rather crude main landing gear was replaced with something more delicate from the scrap box, even though I retained the main wheels. The front landing gear was taken wholesale from the MiG-23, but had to be shortened for a proper stance.

A display holder adapter was integrated into the belly for the flight scenes, hidden well between the ventral ordnance.

The hardpoints, including missile launch rails, came from the MiG-23; the pylons had to be adjusted to match the Su-15's wing profile shape, the Anab missiles lost their tail sections to create the fictional Indian 'Saanp' AAMs. The R-3s on the outer stations were left over from a MP MiG-21. The ventral pylons belong to Academy MiG-23/27s, one came from the donor kit, the other was found in the spares box. The PTB-490 drop tanks also came from a KP MiG-21 (or one of its many reincarnations, not certain).

Painting and markings:

The paint scheme for this fictional aircraft was largely inspired by a picture of a whiffy and very attractive Saab 37 Viggen (an 1:72 Airfix kit) in IAF colors, apparently a model from a contest. BTW, India actually considered buying the Viggen for its Air Force!

IAF aircraft were and are known for their exotic and sometimes gawdy paint schemes, and with IAF MiG-21 “C 992” there’s even a very popular (yet obscure) aircraft that sported literal tiger stripes. The IAF Viggen model was surely inspired by this real aircraft, and I adopted something similar for my HF-26M.

IAF 1 Squadron was therefore settled, and for the paint scheme I opted for a "stripish" scheme, but not as "tigeresque" as "C 992". I found a suitable benchmark in a recent Libyian MiG-21, which carried a very disruptive two-tone grey scheme. I adapted this pattern to the HA-26M airframe and replaced its colors, similar to the IAF Viggen model, which became a greenish sand tone (a mix of Humbrol 121 with some 159; I later found out that I could have used Humbrol 83 from the beginning, though...) and a very dark olive drab (Humbrol 66, which looks like a dull dark brown in contrast with the sand tone), with bluish grey (Humbrol 247) undersides. With the large delta wings, this turned out to look very good and even effective!

For that special "Indian touch" I gave the aircraft a high-contrast fin in a design that I had seen on a real camouflaged IAF MiG-21bis: an overall dark green base with a broad, red vertical stripe which was also the shield for the fin flash and the aircraft's tactical code (on the original bare metal). The fin was first painted in green (Humbrol 2), the red stripe was created with orange-red decal sheet material. Similar material was also used to create the bare metal field for the tactical code, the yellow bars on the splitter plates and for the thin white canopy sealing.

After basic painting was done the model received an overall black ink washing, post-panel shading and extensive dry-brushing with aluminum and iron for a rather worn look.

The missiles became classic white, while the drop tanks, as a contrast to the camouflaged belly, were left in bare metal.

Decals/markings came primarily from a Begemot MiG-25 kit, the tactical codes on the fin and under the wings originally belong to an RAF post-WWII Spitfire, just the first serial letter was omitted. Stencils are few and they came from various sources. A compromise is the unit badge on the fin: I needed a tiger motif, and the only suitable option I found was the tiger head emblem on a white disc from RAF No. 74 Squadron, from the Matchbox BAC Lightning F.6&F.2A kit. It fits stylistically well, though. ;-)

Finally, the model was sealed with matt acrylic varnish (except for the black radome, which became a bit glossy) and finally assembled.

A spontaneous build, and the last one that I completed in 2022. However, despite a vague design plan the model evolved as it grew. Bashing the primitive PM Model Su-15 with the Academy MiG-23 parts was easier than expected, though, and the resulting fictional aircraft looks sturdy but quite believable - even though it appears to me like the unexpected child of a Mirage III/F-4 Phantom II intercourse, or like a juvenile CF-105 Arrow, just with mid-wings? Nevertheless, the disruptive paint scheme suits the delta wing fighter well, and the green/red fin is a striking contrast - it's a colorful model, but not garish.

+++ DISCLAIMER +++

Nothing you see here is real, even though the model, the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

Alexander Martin Lippisch (November 2, 1894 – February 11, 1976) was a German aeronautical engineer, a pioneer of aerodynamics who made important contributions to the understanding of flying wings, delta wings and the ground effect.

Anyway, the Li 383's overall impact was not significant. Production numbers remained low, and all in all, only a total of 80-100 machines were completed and made operational when the hostilities ended.

General characteristics:

Crew: one

Length: 7.78 m (25 ft 5 1/2 in)

Wingspan: 12.67 m (41 ft 6 in)

Height: 3.86 m (12 ft 8 in)

Wing area: 46.8 m² (502.1 ft²)

Empty weight: 4,600 kg (10,141 lb)

Loaded weight: 6,912 kg (15,238 lb)

Max. takeoff weight: 8,100 kg (17,857 lb)

Powerplant:

1× BMW 018A turbojet, 25kN (5.200 lb)

Performance:

Maximum speed: 977 km/h (estimated) (607 mph) at 12,000 meters (39,000 ft)

Service ceiling: 16,000 m (estimated) (52,000 ft)

Rate of climb: 22 m/s (estimated) (4,330 ft/min)

Wing loading: 147.7 kg/m² (20.2 lb/ft²)

Thrust/weight: 0.34

Armament:

4× 30 mm (1.18 in) MK 108 cannons around the air intake with 75 RPG

2x underwing hardpoints for two 300l drop tanks or 2x 250 kg (550 lb) bombs;

alternatively, various weapon sets (Rüstsätze) were available, including racks for 8× (R1) or 12× (R3)

R 65 “Föhn” or for 24x R4M unguided missiles (R2), or for 2× Ruhrstahl X-4 Wire Guided AAMs (R4)

The kit and its assembly:

This fictional Luft ’46 aircraft was inspired by the question what a further developed Ta 183 could have looked like, and it was also influenced by the many tailless Lippisch designs that never left the drawing board.

From the hardware perspective, the design is more or less the salvage of the most useable parts of the PM Model Horten IX/Go 229 kit – namely the outer wing sections. The PM Model Ta 183 is only marginally “better”, and I had one of these in the stash (Revell re-boxing), too. So, why not combine two dreadful kits into something …new?

Well, that was the plan, and building was rather straightforward. In the cockpit, I added simple side consoles, a dashboard, some oxygen flasks, a different seat and a pilot figure (seatbelts simulated with tape strips) – the kit would be finished with closed canopy.

An exhaust pipe was integrated and the air intake filled with a better compressor fan (from an Airfix D.H. Venom, IIRC, fits perfectly). The inner walls of the landing gear wells (well, they are not existent) were cut away and replaced with leftover jet engine parts, so that there was some structure and depth. The landing gear was taken OOB, though, I just used slightly bigger wheels, since the “new” aircraft would have considerably more mass than the Ta 183.

The highly swept, long Ta 183 tail was cut off and replaced by a surplus Me 262 fin and tail section (Matchbox). Despite the different shape and size, and the resulting side view profile reminds strangely of the Saab 29?

The original Ta 183 wings were not mounted and their attachment points on the fuselage cut/sanded away. Instead, I used the outer wing sections from the Go 229, with clipped wing tips for a different shape.

When I held the wings to the fuselage, the whole thing looked …boring. Something was missing, hard to pinpoint. After consulting some Luft ’46 literature I adapted a trick for better stability: a gull wing shape. This was achieved through simple cuts to the wings’ upper halves. Then the wings were bent down, the gap filled with a styrene strip, and finally PSRed away. Looks very dynamic, and also much better!

Another late addition was the underwing armament. I was about to start painting when I again found that something was missing… The new wings made the aircraft pretty large, so I considered some underwing ordnance. Anyway, I did not want to disrupt the relatively clean lines with ugly bombs or drop tanks, so I installed a pair of racks with six launch tubes for R 65 “Föhn” unguided AAMs into the lower wing surfaces, in a semi-recessed position and with a deflector plate for the rocket exhausts.

Painting and markings:

As a high altitude interceptor and late war design, this one was to receive a simple and relatively light livery, even though I stuck with classic RLM tones. The Li 383 was basically painted all-over RLM 76 (Humbrol 247), onto which RLM 75 (from Modelmaster) was added, in the form of highly thinned enamel paint for a cloudy and improvised effect, applied with a big and soft brush. On top of the wings, a typical two-tone scheme was created, while on the fuselage’s upper sides only some thin mottles were added.

In order to lighten the scheme up and add a unique twist, I added further mottles to the flanks and the fin, but this time with RLM 77. This is a very light grey – originally reserved for tactical markings, but also “abused” in the field for camouflage mods, e. g. on high-flying He 177 bombers. I used Humbrol 195 (RAL 7035), again applied with a brush and highly thinned for a rather cloudy finish.

The air intake section and the intake duct were painted in aluminum, while the engine exhaust section as well as the missile racks and the areas around the gun ports were painted with Revell 99 (Iron Metallic) and Steel Metallizer.

The cockpit interior became dark grey (RLM 66) while the landing gear, the wells and the visible engine parts inside became RLM 02.

The kit was lightly weathered with a thin black ink wash and some dry-brushing.

The markings were puzzled together; due to the light basic tones of the model, the upper crosses became black, with only a very small cross on the flanks due to the lack of space, and for the wings’ undersides I used “old school” full color markings in black and white. The red color for the tactical code was basically chosen because it would be a nice contrast to the bluish-grey overall livery.

Finally the kit was sealed with matt acrylic varnish and some gun soot stains added with grinded graphite, as well as some traces of flaked paint on the wings’ leading edges and around the cockpit.

Well, the attempt to bash two mediocre (at best) kits into something else and hopefully better worked out well – the Li 383 does not look totally out of place, even though it turned out to become a bigger aircraft than expected. However, the aircraft has this certain, futuristic Luft ’46 look – probably thanks to the gull wings, which really change the overall impression from a simple kitbash to a coherent design which-could-have-been. The livery also fits well and looks better than expected. Overall, a positive surprise.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Republic P-47 Thunderbolt was one of the largest and heaviest fighter aircraft in history to be powered by a single piston engine. It was heavily armed with eight .50-caliber machine guns, four per wing. When fully loaded, the P-47 weighed up to eight tons, and in the fighter-bomber ground-attack roles could carry five-inch rockets or a significant bomb load of 2,500 pounds; it could carry over half the payload of the B-17 bomber on long-range missions (although the B-17 had a far greater range).

Twelve P-47H were lost in operational crashes with the 358th Group resulting in 11 deaths, two after VE Day, and two (44-21134 on 13 April 1945 and 44-21230 on 16 April 1945) were shot down in combat, both by ground fire.

General characteristics:

Crew: 1

Length: 39 ft 2 in (11.96 m)

Wingspan: 40 ft 9 in (12.42 m)

Height: 14 ft 8 in (4.47 m)

Wing area: 300 ft² (27.87 m²)

Empty weight: 10,000 lb (4,535 kg)

Loaded weight: 13,300 lb (6,032 kg)

Max. takeoff weight: 17,500 lb (7,938 kg)

Powerplant:

1× Chrysler XIV-2220-2 sixteen-cylinder inverted Vee liquid-cooled engine, rated at 2.450 hp.

Performance:

Maximum speed: 503 mph at 30,000 ft (810 km/h at 9,145 m)

Range: 920 mi combat, 2.175 ml ferry (1.480 km / 3.500 km)

Service ceiling: 43,000 ft (13,100 m)

Rate of climb: 3,120 ft/min (15.9 m/s)

Wing loading: 44.33 lb/ft² ()

Power/mass: 0.19 hp/lb (238 W/kg)

Armament:

8× .50 in (12.7 mm) M2 Browning machine guns (3.400 rounds)

Up to 2,500 lb (1,134 kg) of bombs, drop tanks and/or 10× 5 in (127 mm) unguided rockets

The kit and its assembly:

I had the (X)P-47H on the agenda for some time, and even the respective MPM kit stashed away. But it took some time to start this project - one reason actually being the, well, crudeness of the MPM offering. Anyway, I wanted to build a service aircraft, and I wondered how this would have looked like, way beyond 1944? That brought me towards the late bubble canopy versions of the P-47D - and suddenly the idea was born to convert the XP-47H into a respective service aircraft which would not only carry the Chrysler XIV-2220-1 V16 engine, but also other improvements of the type. This eventually led to the decision to make this build a kitbash, as a spine implantation would be the easiest way to incorporate the lowered back - or so I thought...

I chose the ancient Heller P-47(N) as donation kit. Not because it was “good”, it just had the right ingredients and was cheap and easy to procure. What sounded like a simple plan turned into a twisted route to vague success. I took the front fuselage and the lower belly from the MPM kit, as well as the horizontal stabilizers and mated it with the upper and rear fuselage of the Heller Thunderbolt. This could have been easy, if both kits would not have had different fuselage diameters - the Heller kit is about 1mm too narrow, even though the length is fine. In order to compensate, I built two new fuselage halves from the salvaged pieces, and once these were stable and more or less sanded even, put together. Inside, the cockpit was taken from the Heller kit, but the seat comes from the MPM kit, and a pilot figure was added. Another problem is the fact that the MPM kit features engraved panel lines, while the Heller kit has old school, raised details and lots of rivets.

The propeller from the MPM kit is a joke, so I built a replacement from scratch - from a drop tank front half from an ancient Revell F4U, and the individual propeller blades were taken from an Italeri F4U. Inside the fuselage, a styrene tube was implanted which holds the new propeller on a metal axis, so it can spin freely.

Other personal mods include lowered flaps and the large cooler intake was opened, with foamed styrene placed inside which mimics some mesh. The same method was also used inside of the intercooler outlets (primarily in order to block any light from shining through). Inside of the landing gear wells I added some structure made from styrene profiles.

Another bigger challenge was the wing attachment - Heller and MPM kit differ considerably in this aspect, so that swapping parts is not easy. The MPM kit has the wing roots molded onto the fuselage halves, while the Heller wings are, more or less, directly attached to the fuselage. As a consequence the Heller wings hold the complete landing gear wells, while the MPM solution has divided sections. I decided to get rid of the MPM wing roots, about 3mm of material, and onto these stubs the Heller wings were attached. The landing gear came from the Heller kit, but the main wheels come from a (new) Revell Me 262 - both MPM and Heller parts are not recommended for serious use... Finally, the many exhausts and cooler flaps were either sanded away and replaced by scratched parts, or added - e. g. the vents behind the cockpit. While the Heller kit features bomb and missile hardpoints under the wings I decided to leave them away - this is supposed to be a fast interceptor, not a train-hunting plough.

Painting and markings:

As this was to be a very late WWII aircraft, NMF was certain, and I wanted to place the service P-47H into the European conflict theatre, where its speed would IMHO be best used against German jet threats. I wanted a colorful aircraft, though, and settled for a machine of the 358th FG. This group actually flew Thunderbolts in the 365-367th Squadrons, and I found several profiles of these gaudy things.

Common to all of them was an orange tail and a dark blue back, while the engine cowling would be decorated with a red front and the air outlets would carry bands in red, white and blue, with lots of tiny stars sprinkled upon. Furthermore, I found specimen with white cowlings behind the red front end, or even yellow cowlings. Pretty cool.

I tried to mimic this look. The model was basically painted with Aluminum Metallizer (Humbrol 27002) overall. The effect is really good, even without rubbing treatment. Some panels were contrasted with Aluminium Plate and Polished Steel Metallizer (Modelmaster), as well as with Aluminum (Humbrol 56, which is rather a metallic grey). The latter was also used on the landing gear. The anti-glare panel in front of the cockpit was painted with Olive Drab (ANA 613 from Modelmaster).

Since there is no air intake opening on the inline engine I decided to paint the spinner in bright red (Humbrol 19), and tried to incorporate the white and blue theme with stars decoration to the rest of the nose. As a convenient coincidence, I found decals from an Italeri B-66 in the stash: it features a version with dark blue jet air intake decorations in the right size, colors and style for what I had been looking for. So, instead of painting everything by hand I decided to incorporate this decal option.

The area behind the spinner was painted white and then the B-66 decals applied to the front flanks. The radiator air intake scoop had to be cut out, but the overall size and shape were a very good match. Even the transition into the blue spine and cockpit area worked well!

The tail was painted with Humbrol 18, later some shading with Humbrol 82 was added. The blue spine was done with a mix of Humbrol 104 and 15 (Oxford Blue and Midnight Blue) - not a perfect match for the B-66 decal colors, but after some dirt and weathering these differences would blur.

Cockpit interior was painted in Humbrol 159 (Khaki Drab) and Zinc Chromate Green from Model Master. The landing gear wells received a chrome yellow primer (Humbrol 225 - actually RAF Mid Stone but a perfect match for the task) finish.

For weathering the kit received a rubbing treatment with grinded graphite, which adds a dark, metallic shine and emphasizes the kit’s raised panel lines. Some dry painting with Aluminum was added, too, simulating chipped paint on the leading edges. I also added some oil stains around the engine, and serious soot stains at the exhaust.

Decals were, beyond the B-66 decoration, puzzled together. The aircraft' code 'CH-F[bar]' is another exotic twist, in two ways. The bar under the letter marks a second use of that code within the squadron, and as a difference from normal code placement (normally exclusively on the fuselage) I placed the aircraft's individual code letter on the fin, a practice on some P-51s and a consequence of the relatively large letter decals.

The nose art is a fictional puzzle, consisting of a Czech MiG-21 pin-up from the Pardubice '89 meeting. The “Ohio Express” tag comes from a Tamiya 1:100 F-105 Thunderchief. A neat combination that even matches the overall colors well!

As a final step, a coat of semi matt acrylic varnish was applied, with the exception of the anti glare panel, which became purely matt.

A better XP-47H? Hard to tell, since this kitbashing was a messy and rather crude work, so the overall finish does not look as good as I hoped for. But the lowered spine and the fin root extension adds to a fast look of this thing, more elegant (if that's possible in this case?) than the Razorback prototypes. I can't help, but the finished article looks like an Evel Knievel stunt vehicle? The red spinner looks a bit odd, but I'll leave it this way.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Republic P-47 Thunderbolt was one of the largest and heaviest fighter aircraft in history to be powered by a single piston engine. It was heavily armed with eight .50-caliber machine guns, four per wing. When fully loaded, the P-47 weighed up to eight tons, and in the fighter-bomber ground-attack roles could carry five-inch rockets or a significant bomb load of 2,500 pounds; it could carry over half the payload of the B-17 bomber on long-range missions (although the B-17 had a far greater range).

Twelve P-47H were lost in operational crashes with the 358th Group resulting in 11 deaths, two after VE Day, and two (44-21134 on 13 April 1945 and 44-21230 on 16 April 1945) were shot down in combat, both by ground fire.

General characteristics:

Crew: 1

Length: 39 ft 2 in (11.96 m)

Wingspan: 40 ft 9 in (12.42 m)

Height: 14 ft 8 in (4.47 m)

Wing area: 300 ft² (27.87 m²)

Empty weight: 10,000 lb (4,535 kg)

Loaded weight: 13,300 lb (6,032 kg)

Max. takeoff weight: 17,500 lb (7,938 kg)

Powerplant:

1× Chrysler XIV-2220-2 sixteen-cylinder inverted Vee liquid-cooled engine, rated at 2.450 hp.

Performance:

Maximum speed: 503 mph at 30,000 ft (810 km/h at 9,145 m)

Range: 920 mi combat, 2.175 ml ferry (1.480 km / 3.500 km)

Service ceiling: 43,000 ft (13,100 m)

Rate of climb: 3,120 ft/min (15.9 m/s)

Wing loading: 44.33 lb/ft² ()

Power/mass: 0.19 hp/lb (238 W/kg)

Armament:

8× .50 in (12.7 mm) M2 Browning machine guns (3.400 rounds)

Up to 2,500 lb (1,134 kg) of bombs, drop tanks and/or 10× 5 in (127 mm) unguided rockets

The kit and its assembly:

I had the (X)P-47H on the agenda for some time, and even the respective MPM kit stashed away. But it took some time to start this project - one reason actually being the, well, crudeness of the MPM offering. Anyway, I wanted to build a service aircraft, and I wondered how this would have looked like, way beyond 1944? That brought me towards the late bubble canopy versions of the P-47D - and suddenly the idea was born to convert the XP-47H into a respective service aircraft which would not only carry the Chrysler XIV-2220-1 V16 engine, but also other improvements of the type. This eventually led to the decision to make this build a kitbash, as a spine implantation would be the easiest way to incorporate the lowered back - or so I thought...

I chose the ancient Heller P-47(N) as donation kit. Not because it was “good”, it just had the right ingredients and was cheap and easy to procure. What sounded like a simple plan turned into a twisted route to vague success. I took the front fuselage and the lower belly from the MPM kit, as well as the horizontal stabilizers and mated it with the upper and rear fuselage of the Heller Thunderbolt. This could have been easy, if both kits would not have had different fuselage diameters - the Heller kit is about 1mm too narrow, even though the length is fine. In order to compensate, I built two new fuselage halves from the salvaged pieces, and once these were stable and more or less sanded even, put together. Inside, the cockpit was taken from the Heller kit, but the seat comes from the MPM kit, and a pilot figure was added. Another problem is the fact that the MPM kit features engraved panel lines, while the Heller kit has old school, raised details and lots of rivets.

The propeller from the MPM kit is a joke, so I built a replacement from scratch - from a drop tank front half from an ancient Revell F4U, and the individual propeller blades were taken from an Italeri F4U. Inside the fuselage, a styrene tube was implanted which holds the new propeller on a metal axis, so it can spin freely.

Other personal mods include lowered flaps and the large cooler intake was opened, with foamed styrene placed inside which mimics some mesh. The same method was also used inside of the intercooler outlets (primarily in order to block any light from shining through). Inside of the landing gear wells I added some structure made from styrene profiles.

Another bigger challenge was the wing attachment - Heller and MPM kit differ considerably in this aspect, so that swapping parts is not easy. The MPM kit has the wing roots molded onto the fuselage halves, while the Heller wings are, more or less, directly attached to the fuselage. As a consequence the Heller wings hold the complete landing gear wells, while the MPM solution has divided sections. I decided to get rid of the MPM wing roots, about 3mm of material, and onto these stubs the Heller wings were attached. The landing gear came from the Heller kit, but the main wheels come from a (new) Revell Me 262 - both MPM and Heller parts are not recommended for serious use... Finally, the many exhausts and cooler flaps were either sanded away and replaced by scratched parts, or added - e. g. the vents behind the cockpit. While the Heller kit features bomb and missile hardpoints under the wings I decided to leave them away - this is supposed to be a fast interceptor, not a train-hunting plough.

Painting and markings:

As this was to be a very late WWII aircraft, NMF was certain, and I wanted to place the service P-47H into the European conflict theatre, where its speed would IMHO be best used against German jet threats. I wanted a colorful aircraft, though, and settled for a machine of the 358th FG. This group actually flew Thunderbolts in the 365-367th Squadrons, and I found several profiles of these gaudy things.

Common to all of them was an orange tail and a dark blue back, while the engine cowling would be decorated with a red front and the air outlets would carry bands in red, white and blue, with lots of tiny stars sprinkled upon. Furthermore, I found specimen with white cowlings behind the red front end, or even yellow cowlings. Pretty cool.

I tried to mimic this look. The model was basically painted with Aluminum Metallizer (Humbrol 27002) overall. The effect is really good, even without rubbing treatment. Some panels were contrasted with Aluminium Plate and Polished Steel Metallizer (Modelmaster), as well as with Aluminum (Humbrol 56, which is rather a metallic grey). The latter was also used on the landing gear. The anti-glare panel in front of the cockpit was painted with Olive Drab (ANA 613 from Modelmaster).

Since there is no air intake opening on the inline engine I decided to paint the spinner in bright red (Humbrol 19), and tried to incorporate the white and blue theme with stars decoration to the rest of the nose. As a convenient coincidence, I found decals from an Italeri B-66 in the stash: it features a version with dark blue jet air intake decorations in the right size, colors and style for what I had been looking for. So, instead of painting everything by hand I decided to incorporate this decal option.

The area behind the spinner was painted white and then the B-66 decals applied to the front flanks. The radiator air intake scoop had to be cut out, but the overall size and shape were a very good match. Even the transition into the blue spine and cockpit area worked well!

The tail was painted with Humbrol 18, later some shading with Humbrol 82 was added. The blue spine was done with a mix of Humbrol 104 and 15 (Oxford Blue and Midnight Blue) - not a perfect match for the B-66 decal colors, but after some dirt and weathering these differences would blur.

Cockpit interior was painted in Humbrol 159 (Khaki Drab) and Zinc Chromate Green from Model Master. The landing gear wells received a chrome yellow primer (Humbrol 225 - actually RAF Mid Stone but a perfect match for the task) finish.

For weathering the kit received a rubbing treatment with grinded graphite, which adds a dark, metallic shine and emphasizes the kit’s raised panel lines. Some dry painting with Aluminum was added, too, simulating chipped paint on the leading edges. I also added some oil stains around the engine, and serious soot stains at the exhaust.

Decals were, beyond the B-66 decoration, puzzled together. The aircraft' code 'CH-F[bar]' is another exotic twist, in two ways. The bar under the letter marks a second use of that code within the squadron, and as a difference from normal code placement (normally exclusively on the fuselage) I placed the aircraft's individual code letter on the fin, a practice on some P-51s and a consequence of the relatively large letter decals.

The nose art is a fictional puzzle, consisting of a Czech MiG-21 pin-up from the Pardubice '89 meeting. The “Ohio Express” tag comes from a Tamiya 1:100 F-105 Thunderchief. A neat combination that even matches the overall colors well!

As a final step, a coat of semi matt acrylic varnish was applied, with the exception of the anti glare panel, which became purely matt.

A better XP-47H? Hard to tell, since this kitbashing was a messy and rather crude work, so the overall finish does not look as good as I hoped for. But the lowered spine and the fin root extension adds to a fast look of this thing, more elegant (if that's possible in this case?) than the Razorback prototypes. I can't help, but the finished article looks like an Evel Knievel stunt vehicle? The red spinner looks a bit odd, but I'll leave it this way.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Heinkel He 276 was a night fighter that served with the German Luftwaffe in the later stages of World War II. Its inception dated back to June 1942 when the RLM requested a multi-purpose combat aircraft, the so-called "Arbeitsflugzeug", that could be adapted to various roles and would replace the Bf 110, Ju 88/188 and Do 217.

The He 276 B-2 was the only version to enter service, though - a planned B-3 upgrade with four reheated Jumo 109s (rated at 1.200 kp each) remained on the drawing board.

General characteristics:

Crew: 2

Length (incl. rear antenna): 14.97 m (49 ft 2 in)

Wingspan: 16.56 m (54 ft 3 in)

Height: 5.14 m (16 ft 10 in)

Wing area: 44.4 m² (478 ft²)

Max. takeoff weight: 13,580 kg (29,900 lb)

Powerplant:

4× Junkers Jumo 109-004D jet engines, each rated at 1.015 kp

Performance:

Maximum speed: 916 km/h (494 kn, 568 mph)

Range: 1,540 km (831 nmi, 960 mi)

Ferry range: 2,148 km (1,160 nmi, 1,335 mi)

Service ceiling: 13.300 m (43.564 ft)

Armament:

4 × 30 mm MK 103 cannons in a detachable fairing under the fuselage, 220 RPG;

2× 13 mm MG 131 in an FDL 131ZR tail barbette, 450 RPG;

Factory Rüstsatz "U1" with 4× 30 mm (1.18 in) MK 108 cannons, mounted dorsally as

Schräge Musik (oriented 65° above horizontal), 100 RPG

Two hardpoints under the outer wings, capable of carrying 500 kg each

(normally occupied by 300l drop tanks).

The kit and its assembly:

This whiffy Luft ’46 aircraft model had two inspirational roots. One was the question what could a jet-powered He 219 night fighter have looked like, the other was the real Heinkel P.1065 ‘Arbeitsflugzeug’ project(s), following the idea what that aircraft might have looked like if it had been ushered into production and service?

It would certainly have relied upon existing components – so the concept for this jet-propelled, dedicated night fighter design was born.

The model is a wild kitbash, welded together from the following main ingredients:

• Fuselage of a 1:72 Frog He 219 (Matchbox re-boxing)

• Wings from a 1:100 VEB Plasticart An-24 (NuBee re-boxing)

• Two pairs of 1:72 Revell Me 262 engine nacelles

• Fin and stabilizer from an 1:72 Matchbox Douglas F3D Skyknight

Sounds odd? Yes, and it took some surgical work to get these pieces together. The He 219 fuselage was shortened, a 1” plug taken out at the wings’ trailing edge, thereby shortening the wing roots to the An-24’s dimensions, and the tail section cut off. The tail gap was replaced by a scratched FDL 131Z barbette, and new stabilizers from a Matchbox F3D placed on top of the fuselage, far away from the jet efflux.

I did not want to open the cockpit, but the canopy offers good visibility into the interior, so I scratched something together - the Frog kit has literally nothing of value to offer, so I added a new floor (also acting as front wheel well), new Me 262 seats, dashboards, an IR sight and something that looks like the upper side of a fuselage tank, plus two crew figures.

The wings were clipped, too, and the original An-24 turboprops replaced by two pairs of Me 262 engines in the same place, mounted closely together.

This meant that the landing gear had to go elsewhere, so I relocated the main landing gear wells into the lower fuselage, changing it into a narrow Ar 234 or B-66 style arrangement - from AH-64, F-86 and Bv 155 parts.

For this new arrangement the belly was cut open and a Fiat G.91 part from a Revell kit integrated. The covers for the main landing gear were scratched from sytrene sheet.

The front wheel strut is OOB, but shortened, and instead of a single, big wheel I used smaller twin wheels, from a Matchbox Canberra PR.9. After 25 years these parts finally found a new destination. ^^

The thimble radome is a Pavla resin piece, it actually belongs to a Bristol Beaufighter TF Mk. X, but perfectly fits ins shape and size - and the new nose dramatically changes the He 219 lines!

On the fuselage, I finally added four vertical guns as a "Schräge Musik" installation, adding some more purpose to the rather ugly aircraft. A pair of drop tanks (from two Academy Fw 190 kits) and their respective hardpoints (from a Me 262) complete the ordnance.

I must admit that the thing is ugly as hell, but on the other side looks very German and purposeful - and the new nose section recalls some similarity with a CF-100 or even a B-57a C-130 or a Transall?

Painting and markings:

As a late war German night fighter, almost anything goes. I went for a personal mix of two real night fighter schemes, blended into one: the basis comes from a Me 262 two seater which was finished in an unusual scheme for night duties: upper surfaces in RLM 81 & 83 (Braunviolett and Dunkelgrün), with black (RLM 22) undersides.

Since many night fighters received field modifications, and in patricular much lighter upper surfaces, I added an individual RLM 76 treatment (maybe whitewash, though - not certain if it was intended as winter or night cammo) that comes from a Ju 188 night reconnaissance aircraft and which can only be described as original.

In an initial step the model received its normal paint scheme (using Humbrol 116 and 155, plus flat black from Modelmaster), the RLM 76 additions (with Modelmaster Authentic enamel paint and some Humbrol 127) were then added, so that the original paint could shine through. Everything done with a soft brush, and the result is IMHO very good.

All interior surfaces and the landing gear were painted in dark grey (Humbrol 67) and later slightly dry-painted with medium grey (Humbrol 176) in order to point out details.

Decals were puzzled together from various sources, and I kept everything very simple and minimal - just some German insignia, a tactical code and the last digits of the airframe's serial number at the top of the fin.

Finally, some soot stains were added with grinded graphite and everything sealed under matt acrylic varnish (Revell).

I will admit that the He 276 is an ugly aircraft, with a rather utilarian design. But this actually adds a very German touch to it - and how else could a successos to the He 219 or Ju 88 C look like? ;)

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Douglas F3D Skyknight (later designated F-10 Skyknight) was a United States twin-engined, mid-wing jet fighter aircraft manufactured by the Douglas Aircraft Company in El Segundo, California. The F3D was designed as a carrier-based all-weather night fighter and saw service with the United States Navy and United States Marine Corps. The mission of the F3D-2 was to search out and destroy enemy aircraft at night.

The F3D was not intended to be a typical sleek and nimble dogfighter, but as a standoff night fighter, packing a powerful radar system and a second crew member. It originated in 1945 with a US Navy requirement for a jet-powered, radar-equipped, carrier-based night fighter. The Douglas team led by Ed Heinemann designed around the bulky air intercept radar systems of the time, with side-by-side seating for the pilot and radar operator. The result was an aircraft with a wide, deep, and roomy fuselage. Instead of ejection seats, an escape tunnel was used.

As a night fighter that was not expected to be as fast as smaller daylight fighters, the expectation was to have a stable platform for its radar system and the four 20 mm cannon mounted in the lower fuselage. The F3D was, however, able to outturn a MiG-15 in an inside circle. The fire control system in the F3D-1 was the Westinghouse AN/APQ-35.

The AN/APQ-35 was advanced for the time, a combination of three different radars, each performing separate functions: an AN/APS-21 search radar, an AN/APG-26 tracking radar, both located in the nose, and an AN/APS-28 tail warning radar. The complexity of this vacuum tube-based radar system, which was produced before the advent of semiconductor electronics, required intensive maintenance to keep it operating properly.

The F3D Skyknight was never produced in great numbers but it did achieve many firsts in its role as a night fighter over Korea. While it never achieved the fame of the North American F-86 Sabre, it did down several Soviet-built MiG-15s as a night fighter over Korea with only one air-to-air loss of its own against a Chinese MiG-15 on the night of 29 May 1953.

In the years after the Korean War, the F3D was gradually replaced by more powerful aircraft with better radar systems. The F3D's career was not over though; its stability and spacious fuselage made it easily adaptable to other roles. The Skyknight played an important role in the development of the radar-guided AIM-7 Sparrow missile in the 1950s which led to further guided air-to-air missile developments.

In 1954, the F3D-2M was the first U.S. Navy jet aircraft to be fitted with an operational air-to-air missile: the Sparrow I,an all weather day/night BVR missile that used beam riding guidance for the aircrew to control the flight of the missile. Only 38 aircraft (12 F3D-1Ms, and 16 F3D-2Ms) were modified to use the missiles, though.

One of the F3D's main flaws, which it shared with many early jet aircraft, was its lack of power and performance. Douglas tried to mend this through a radical redesign: The resulting F3D-3 was the designation assigned to a swept-winged version (36° sweep at quarter chord) of the Skyknight. It was originally to be powered by the J46 turbojet, rated at 4.080 lbf for takeoff, which was under development but suffered serious trouble.

This led to the cancellation of the J46, and calculated performance of the F3D-3 with the substitute J34 was deemed insufficient. As an alternative the aircraft had to be modified to carry two larger and longer J47-GE-2 engines, which also powered the USN's FJ-2 "Fury" fighter.

This engine's thrust of 6.000 pounds-force (27 kN) at 7,950 rpm appeared sufficient for the heavy, swept-wing aircraft, and in 1954 an order for 287 production F3D-3s was issued, right time to upgrade the new type with the Sparrow I.

While the F3D-3's outline resembled that of its straight wing predecessors, a lot of structural changes had to be made to accommodate the shifted main wing spar, and the heavy radar equipment also took its toll: the gross weight climbed by more than 3 tons, and as a result much of the gained performance through the stronger engines and the swept wings was eaten away.

Maximum internal fuel load was 1.350 US gallons, plus a further 300 in underwing drop tanks. Overall wing surface remained the same, but the swept wing surfaces reduced the wing span.

In the end, thrust-to-weight ratio was only marginally improved and in fact, the F3D-3 had a lower rate of climb than the F3D-2, its top speed at height was only marginally higher, and stall speed climbed by more than 30 mph, making carrier landings more complicated.

It's equipment was also the same - the AN/APQ-35 was still fitted, but mainly because the large radar dish offered the largest detection range of any carrier-borne type of that time, and better radars that could match this performance were still under construction. Anyway, the F3D-3 was able to carry Sparrow I from the start, and this would soon be upgraded to Sparrow III (which became the AIM-7), and it showed much better flight characteristics at medium altitude.

Despite the ,many shortcomings the "new" aircraft represented an overall improvement over the F3D-2 and was accepted for service. Production of the F3D-3 started in 1955, but technology advanced quickly and a serious competitor with supersonic capability appeared with the McDonnell F3H Demon and the F4D Skyray - much more potent aircraft that the USN immediately preferred to the slow F3Ds. As a consequence, the production contract was cut down to only 102 aircraft.

But it came even worse: production of the swept wing Skyknight already ceased after 18 months and 71 completed airframes. Ironically, the F3D-3's successor, the F3H and its J40 engine, turned out to be more capricious than expected, which delayed the Demon's service introduction and seriously hampered its performance, so that the F3D-3 kept its all weather/night fighter role until 1960, and was eventually taken out of service in 1964 when the first F-4 Phantom II fighters appeared in USN service.

In 1962 all F3D versions were re-designated into F-10, the swept wing F3D-3 became the F-10C. The straight wing versions were used as trainers and also served as an electronic warfare platform into the Vietnam War as a precursor to the EA-6A Intruder and EA-6B Prowler, while the swept-wing fighters were completely retired as their performance and mission equipment had been outdated. The last F-10C flew in 1965.

General characteristics

Crew: two

Length: 49 ft (14.96 m)

Wingspan: 42 feet 5 inches (12.95 m)

Height: 16 ft 1 in (4.90 m)

Wing area: 400 ft² (37.16 m²)

Empty weight: 19.800 lb (8.989 kg)

Loaded weight: 28,843 lb (13.095 kg)

Max. takeoff weight: 34.000 lb (15.436 kg)

Powerplant:

2× General Electric J47-GE-2 turbojets, each rated at 6.000 lbf (26,7 kN) each

Performance

Maximum speed: 630 mph (1.014 km/h) at sea level, 515 mph (829 km/h) t (6,095 m)

Cruise speed: 515 mph (829 km/h) at 40,000 feet

Stall speed: 128 mph (206 km/h)

Range: 890 mi (1.433 km) with internal fuel; 1,374 mi, 2,212 km with 2× 300 gal (1.136 l) tanks

Service ceiling: 43.000 ft (13.025 m)

Rate of climb: 2,640 ft/min (13,3 m/s)

Wing loading: 53.4 lb/ft² (383 kg/m²)

Thrust/weight: 0.353

Armament

4× 20 mm Hispano-Suiza M2 cannon, 200 rpg, in the lower nose

Four underwing hardpoints inboard of the wing folding points for up to 4.000 lb (1.816 kg)

ordnance, including AIM-7 Sparrow air-to-air missiles, 11.75 in (29.8cm) Tiny Tim rockets, two

150 or 300 US gal drop tanks or bombs of up to 2.000 lb (900 kg) caliber, plus four hardpoints

under each outer wing for a total of eight 5" HVARs or eight pods with six 2 3/4" FFARs each

The kit and its assembly:

Another project which had been on the list for some years now but finally entered the hardware stage. The F3D itself is already a more or less forgotten aircraft, and there are only a few kits available - there has been a vacu kit, the Matchbox offering and lately kits in 1:72 and 1:48 by Sword.

The swept wing F3D-3 remained on the drawing board, but would have been a very attractive evolution of the tubby Skyknight. In fact, the swept surfaces resemble those of the A3D/B-66 a Iot, and this was the spark that started the attempt to build this aircraft as a model through a kitbash.

This model is basically the Matchbox F3D coupled with wings from an Italeri B-66, even though, being much bigger, these had to be modified.

The whole new tail is based on B-66 material. The fin's chord was shortened, though, and a new leading edge (with its beautiful curvature) had to be sculpted from 2C putty. The vertical stabilizers also come from the B-66, its span was adjusted to the Skyknight's and a new root intersection was created from styrene and putty, so that a cross-shaped tail could be realized.

The tail radar dish was retained, even though sketches show the F3D-3 without it.

The wings were take 1:1 from the B-66 and match well. They just had to be shortened, I set the cut at maybe 5mm outwards of the engine pods' attachment points. They needed some re-engraving for the inner flaps, as these would touch the F3D-3's engines when lowered, but shape, depth and size are very good for the conversion.

On the fuselage, the wings' original "attachment bays" had to be filled, and the new wings needed a new position much further forward, directly behind the cockpit, in order to keep the CoG.

One big issue would be the main landing gear. On the straight wing aircraft it retracts outwards, and I kept this arrangement. No detail of the exact landing gear well position was available to me, so I used the Matchbox parts as stencils and placed the new wells as much aft as possible, cutting out new openings from the B-66 wings.

The OOB landing gear was retained, but I added some structure to the landing gear wells with plastic blister material - not to be realistic, just for the effect. A lot of lead was added in the kit's nose section, making sure it actually stands on the front wheel.

The Matchbox Skyknight basically offers no real problems, even though the air intake design leaves, by tendency some ugly seams and even gaps. I slightly pimped the cockpit with headrests, additional gauges and a gunsight, as well as two (half) pilot figures. I did not plan to present the opened cockpit and the bulbous windows do not allow a clear view onto the inside anyway, so this job was only basically done. In fact, the pilots don't have a lower body at all...

Ordnance comprises of four Sparrow III - the Sparrow I with its pointed nose could have been an option, too, but I think at the time of 1960 the early version was already phased out?

Painting and markings:

This was supposed to become a typical USN service aircraft of the 60ies, so a grey/white livery was predetermined. I had built an EF-10B many years ago from the Matchbox kit, and the grey/white guise suits the Whale well - and here it would look even better, with the new, elegant wings.

For easy painting I used semi matt white from the rattle can on the lower sides (painting the landing gear at the same time!), and then added FS 36440 (Light Gull Grey, Humbrol 129) with a brush to the upper sides. The radar nose became semi matt black (with some weathering), while the RHAWS dish was kept in tan (Humbrol 71).

In order to emphasize the landing gear and the respective wells I added a red rim to the covers.

The cockpit interior was painted in dark grey - another factor which made adding too many details there futile, too...

The aircraft's individual marking were to be authentic, and not flamboyant. In the mid 50ies the USN machines were not as colorful as in the Vietnam War era, that just started towards the 60ies.

The markings I used come primarily from an Emhar F3H Demon, which features no less than four(!) markings, all with different colors. I settled for a machine of VF-61 "Jolly Rogers", which operated from the USS Saratoga primarily in the Mediterranean from 1958 on - and shortly thereafter the unit was disbanded.

I took some of the Demon markings and modified them with very similar but somewhat more discrete markings from VMF-323, which flew FJ-4 at the time - both squadrons marked their aircraft with yellow diamonds on black background, and I had some leftover decals from a respective Xtradecal sheet in the stash.

IMHO a good result with the B-66 donation parts, even though I am not totally happy with the fin - it could have been more slender at the top, and with a longer, more elegant spine fillet, but for that the B-66 fin was just too thick. Anyway, I am not certain if anyone has ever built this aircraft? I would not call the F3D-3 elegant or beautiful, but the swept wings underline the fuselage's almost perfect teardrop shape, and the thing reminds a lot of the later Grumman A-6 Intruder?

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

A kitbash using a Phicen body and a Kimi headsculpt .

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

Some background:

The CAC Sabre, sometimes known as the Avon Sabre or CA-27, was an Australian variant of the North American Aviation F-86F Sabre fighter aircraft. In 1951, Commonwealth Aircraft Corporation obtained a license agreement to build the F-86F Sabre. In a major departure from the North American blueprint, it was decided that the CA-27 would be powered by a license-built version of the Rolls-Royce Avon R.A.7, rather than the General Electric J47. In theory, the Avon was capable of more than double the maximum thrust and double the thrust-to-weight ratio of the US engine. This necessitated a re-design of the fuselage, as the Avon was shorter, wider and lighter than the J47.

The CAC 27 Mk 41s’ last carrier operations took place in 1981 in the course of Melbourne’s involvements in two major exercises, Sea Hawk and Kangaroo 81, the ship’s final missions at sea. After Melbourne was decommissioned in 1984, the Fleet Air Arm ceased fixed-wing combat aircraft operation. This was the operational end of the Sabre Mk 41, which had reached the end of their airframe lifetime, and the Sea Sabre fleet had, during its career, severely suffered from accidents and losses: upon retirement, only eight of the original twenty-two aircraft still existed in flightworthy condition, so that the aircraft were all scrapped. The younger RAN A-4Gs were eventually sold to New Zealand, where they were kept in service until 2002.

General characteristics:

Crew: 1

Length: 37 ft 6 in (11.43 m)

Wingspan: 37 ft 1 in (11.3 m)

Height: 14 ft 5 in (4.39 m)

Wing area: 302.3 sq ft (28.1 m²)

Empty weight: 12,000 lb (5,443 kg)

Loaded weight: 16,000 lb (7,256 kg)

Max. takeoff weight: 21,210 lb (9,621 kg)

Powerplant:

1× Rolls-Royce Avon 208A turbojet engine with 8,200 lbf (36.44 kN)

Performance:

Maximum speed: 700 mph (1,100 km/h) (605 knots)

Range: 1,153 mi, (1,000 NM, 1,850 km)

Service ceiling: 52,000 ft (15,850 m)

Rate of climb: 12,000 ft/min at sea level (61 m/s)

Armament:

2× 30 mm ADEN cannons with 150 rounds per gun

5,300 lb (2,400 kg) of payload on six external hardpoints;

Bombs were usually mounted on outer two pylons as the mid pair were wet-plumbed pylons for

2× 200 gallons drop tanks, while the inner pair was usually occupied by a pair of AIM-9 Sidewinder

AAMs

A wide variety of bombs could be carried with maximum standard loadout being 2x 1,000 lb bombs

or 2x Matra pods with unguided SURA missiles plus 2 drop tanks for ground attacks, or 2x AIM-9 plus

two drop tanks as day fighter

The kit and its assembly:

This project was initially inspired by a set of decals from an ESCI A-4G which I had bought in a lot – I wondered if I could use it for a submission to the “In the navy” group build at whatifmodelers.com in early 2020. I considered an FJ-3M in Australian colors on this basis and had stashed away a Sword kit of that aircraft for this purpose. However, I had already built an FJ variant for the GB (a kitbashed mix of an F-86D and an FJ-4B in USMC colors), and was reluctant to add another Fury.

This spontaneously changed after (thanks to Corona virus quarantine…) I cleaned up one of my kit hoards and found a conversion set for a 1:72 CAC 27 from JAYS Model Kits which I had bought eons ago without a concrete plan. That was the eventual trigger to spin the RAN Fury idea further – why not a navalized version of the Avon Sabre for HMAS Melbourne?

The result is either another kitbash or a highly modified FJ-3M from Sword. The JAYS Model Kits set comes with a THICK sprue that carries two fuselage halves and an air intake, and it also offers a vacu canopy as a thin fallback option because the set is actually intended to be used together with a Hobby Craft F-86F.

While the parts, molded in a somewhat waxy and brittle styrene, look crude on the massive sprue, the fuselage halves come with very fine recessed engravings. And once you have cleaned the parts (NOTHING for people faint at heart, a mini drill with a saw blade is highly recommended), their fit is surprisingly good. The air intake was so exact that no putty was needed to blend it with the rest of the fuselage.

The rest came from the Sword kit and integrating the parts into the CAC 27 fuselage went more smoothly than expected. For instance, the FJ-3M comes with a nice cockpit tub that also holds a full air intake duct. Thanks to the slightly wider fuselage of the CAC 27, it could be mounted into the new fuselage halves without problems and the intake duct almost perfectly matches the intake frame from the conversion set. The tailpipe could be easily integrated without any mods, too. The fins had to be glued directly to the fuselage – but this is the way how the Sword kit is actually constructed! Even the FJ-3M’s wings match the different fuselage perfectly. The only modifications I had to make is a slight enlargement of the ventral wing opening at the front and at the read in order to take the deeper wing element from the Sword kit, but that was an easy task. Once in place, the parts blend almost perfectly into each other, just minor PSR was necessary to hide the seams!

Other mods include an extended front wheel well for the longer leg from the FJ-3M and a scratched arrester hook installation, made from wire, which is on purpose different from the Y-shaped hook of the Furies.

For the canopy I relied on the vacu piece that came with the JAYS set. Fitting it was not easy, though, it took some PSR to blend the windscreen into the rest of the fuselage. Not perfect, but O.K. for such a solution from a conversion set.

The underwing pylons were taken from the Sword kit, including the early Sidewinders. I just replaced the drop tanks – the OOB tanks are very wide, and even though they might be authentic for the FJ-3, I was skeptical if they fit at all under the wings with the landing gear extended? In order to avoid trouble and for a more modern look, I replaced them outright with more slender tanks, which were to mimic A-4 tanks (USN FJ-4s frequently carried Skyhawk tanks). They actually come from a Revell F-16 kit, with modified fins. The refueling probe comes from the Sword kit.

A last word about the Sword kit: much light, but also much shadow. While I appreciate the fine surface engravings, the recognizably cambered wings, a detailed cockpit with a two-piece resin seat and a pretty landing gear as well as the long air intake, I wonder why the creators totally failed to provide ANY detail of the arrester hook (there is literally nothing, as if this was a land-based Sabre variant!?) or went for doubtful solutions like a front landing gear that consists of five(!) single, tiny parts? Sadism? The resin seat was also broken (despite being packed in a seperate bag), and it did not fit into the cockpit tub at all. Meh!

Painting and markings:

From the start I planned to give the model the late RAN A-4Gs’ unique air superiority paint scheme, which was AFAIK introduced in the late Seventies: a two-tone wraparound scheme consisting of “Light Admiralty Grey” (BS381C 697) and “Aircraft Grey” (BS 381C 693). Quite simple, but finding suitable paints was not an easy task, and I based my choice on pictures of the real aircraft (esp. from "buzz" number 880 at the Fleet Air Arm Museum, you find pics of it with very good light condition) rather than rely on (pretty doubtful if not contradictive) recommendations in various painting instructions from models or decal sets.

I wanted to keep things simple and settled upon Dark Gull Grey (FS 36231) and Light Blue (FS 35414), both enamel colors from Modelmaster, since both are rather dull interpretations of these tones. Esp. the Light Blue comes quite close to Light Admiralty Grey, even though it should be lighter for more contrast to the darker grey tone. But it has that subtle greenish touch of the original BS tone, and I did not want to mix the colors.

The pattern was adapted from the late A-4Gs’ scheme, and the colors were dulled down even more through a light black ink wash. Some post-shading with lighter tones emphasized the contrast between the two colors again. And while it is not an exact representation of the unique RAN air superiority scheme, I think that the overall impression is there.

The cockpit interior was painted in very dark grey, while the landing gear, its wells and the inside of the air intake became white. A red rim was painted around the front opening, and the landing gear covers received a red outline, too. The white drop tanks are a detail I took from real world RAN A-4Gs - in the early days of the air superiority scheme, the tanks were frequently still finished in the old USN style livery, hence the white body but fins and tail section already in the updated colors.

The decals became a fight, though. As mentioned above, the came from an ESCI kit – and, as expected, the were brittle. All decals with a clear carrier film disintegrated while soaking in water, only those with a fully printed carrier film were more or less usable. One roundel broke and had to be repaired, and the checkered fin flash was a very delicate affair that broke several times, even though I tried to save and repair it with paint. But you can unfortunately see the damage.

Most stencils and some replacements (e. g. the “Navy” tag) come from the Sword FJ-3. While these decals are crisply printed, their carrier film is utterly thin, so thin that applying esp. the larger decals turned out to be hazardous and complicated. Another point that did not really convince me about the Sword kit.

Finally, the kit was sealed with matt acrylic varnish (Italeri) and some soot stains were added around the exhaust and the gun ports with graphite.

In the end, this build looks, despite the troubles and the rather exotic ingredients like a relatively simple Sabre with Australian markings, just with a different Navy livery. You neither immediately recognize the FJ-3 behind it, nor the Avon Sabre’s bigger fuselage, unless you take a close and probably educated look. Very subtle, though.

The RAN air superiority scheme from the late Skyhawks suits the Sabre/Fury-thing well – I like the fact that it is a modern fighter scheme, but, thanks to the tones and the colorful other markings, not as dull and boring like many others, e. g. the contemporary USN "Ghost" scheme. Made me wonder about an early RAAF F-18 in this livery - should look very pretty, too?

Phicen kitbash using the Little Red Riding Hood headsculpt . For the life of me I still can't find a proper Phicen body that matches this particular headsculpt ,this is the pale body and it still doesn't match , so frustrating >:(

A Lego Kitbash of the imperial admiral Natasi Daala from the expensive universe.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Su-21 attack aircraft had its roots in the Su-15 interceptor, which itself was a development of Sukhoi's tailed-delta Su-9 and Su-11 interceptor fighters. Construction of the Su-15 (internal project designation T-58) began in mid-1960, state acceptance tests of the respective T-58-8M1 interception complex with radar and air-to-air missiles started in August 1963.

In 1966 series production at Novosibirsk began, the first pre-series Su-15 interceptor made its first flight from Novosibirsk on 6 March 1966. Once identified as a new service aircraft, NATO christened the type 'Flagon'. While the Su-15 was in series production, a number of improved design features were developed, tested and subsequently introduced with a new production series of the interceptor.

Eventually the MiG-27 and also the Su-17/22 family as well as the biggher Su-24 tactical bomber, thanks to their variable geometry wings, proved to be the more flexible aircraft for the ground attack/fighter bomber role. But the lessons learned from the Su-21 eventually found their way into the very successful, subsonic Su-25 ('Frogfoot') family. The last Su-21D was retired in January 1997, after a service career of 25 years.

General characteristics

Crew: 1

Length (with pitot): 17.57 m (57 ft 6 1/4 in)

Wingspan: 12.24 m (40 ft 1 in)

Height: 4.84 m (15 ft 10 in)

Empty weight: 11.225 kg (24.725 lb)

Loaded weight: 17.500 kg (38.580 lb)

Powerplant:

2× Tumansky R-13-300 turbojets,each rated at 40.21 kN (9,040 lbf) dry and at 70.0 kN (15,730 lbf) with afterburner

Performance

Maximum speed: 1.250km/h (777mph/674nm) at sea level

Range: 1.380 km (855 ml)

Ferry range: 1.850 km (1.146 mi)

Service ceiling: 17.000 m (55.665 ft)

Armament

1× GSh-30A gatling gun with 280 RPG in the lower fuselage

9× hardpoints (three under the fuselage, three under each wing) for a weapon load of up to 5.500kg (12.115lb),

including iron bombs, unguided missiles and rocket pods, guided weapons, napalm tanks or gun pods; two R-60 (AA-8 "Aphid") AAMs were typically carried for self-defense on the outer pylon pair

The kit and its assembly:

This whif actually has a real background, as outlined above - OKB Sukhoi actually worked in the late 60ies on a Su-15 derivate as a specialized attack aircraft, since the Soviet Forces lacked that type. The ground attack types then in service were the vintage MiG-17 and converted MiG-19 fighters, as well as the fast but very limited Su-7 - either outdated fighters or a fighter-bomber with insufficient range and payload.

Specifications for a ground attack aircraft were unclear at that time, though. Supersonic capability was still seen as a vital asset for any military aircraft, and WWII tactics were still the basis for close air support duties. The T-58Sh was eventually one design direction that would keep development time and costs low, starting with a proven basic airframe and adapting it to a new (and very different) role.

The Su-15, from which the T-58Sh was derived, originally was a Mach 2 interceptor, solely armed with missiles. Making THIS a ground attack aircraft surely was a huge step. The projected Su-15Sh, how the aircrfat was also called, was still to be supersonic, since this was seen as a vital asset at that time. This concept would eventually be a dead end, though, or, alternatively, result in the lighter and much cheaper MiG-27 tactical fighter in the 70ies. But it should still take some more years until a subsonic, simple and dedicated aircraft (the T-8, which made its maiden flight in 1975 and became later the Su-25 'Frogfoot') would be the 'right' direction for the new shturmovik. The Su-15Sh actually never left the drawing board, the swing-wing Su-17/20/22 more or less took its place in real life.

With that background my idea was to build a model of the ground attack Su-15 derivate in front line service in the mid 80ies, at the Cold War's peak and used by the Group of Soviet Forces in (Eastern) Germany. The Su-21 designation is fictional. But since the aircraft would be SO different from the Su-15 interceptor I can hardly imagine that it would have been called Su-15Sh in service. Since its cousin, the MiG-27, also received a new designation, I decided to apply the Su-21 code (which was never applied to a real aircraft - those Su-15 versions called Su-21 are just misnomers or speculations of Western 'experts' when the Iron Curtain was still up).

As a coincidence, I had all 'ingredients' at hand:

● Fuselage and fin from a PM Model Su-15

● Nose section from an Academy MiG-27 (leftover from the Q-6 kitbach)

● Wings and horizontal stabilizers from an ESCI A-7

The A-7 wings have slightly more sweep than what the drafted T-58Sh had (45° vs. 40°), as far as I can tell from profiles, but otherwise they fit in shape and size. I just cut the orginal leading edge away, sculpted a new front from putty, and the result looked very good.

What became tricky were the landing gear wells. Part of the Su-15 landing gear retracts into the lower fuselage, and mating this with the Corsair's wings and the potential space for the landing gear there did not match up properly -the wings would end up much too far behind.

After some trials I decided to cut out the landing gear wells on the lower side of the wings, relatively far forward, and cut out a part of the lower fuselage, reversed it, so that the landing gear wells woukd be placed about 5mm further forward, and the wings were finally attached to the fuselage so that these would match the respective openings on the fuselage's bottom. This was more or less the only major and unexpected surgery, and the original Su-15 landing gear could be retained.

Using the A-7's stabilizers was also a bit off the original concept (the T-58Sh appeared to keep the original parts), but I found that the more slender but wider A-7 parts just made the aircraft look more homogenous?

Grafting the MiG-27 cockpit (which was taken OOB) onto the fuselage was not a big problem, since the intersection is of simple shape and fits well by height and width. I made a vertical cut on the Su-15 fuselage in the middle of the air intake area, which would later be hidden through the air intakes. The latter were taken from the Su-15, but simplified: the intake became simple and "vertical", and the large, orginal splitter plates were replaced by the shorter speiceimen from the MiG-27 kit. The fit almost perfectly, are just a bit short, so that a small hole had to be filled with styrene strips on the lower side.

The fin was taken OOB, just as on the propsed real aircraft. The resulting side profile reminds VERY much of a Dassault Étendard on steroids...? The whole thing also looks a bit like the missing link between the Su-15 and the later Su-24 fighter bomber - esp. when you know the Fencer's fixed-wing T-6 prototype.

Externally, the gatling gun (also taken from the leftoevr MiG-27) and a total of nine hardpoints were added - three under the fuselage, flanking the gun, and six under the outer wings.

Since the Su 15 is a pretty large aircraft, I used the opportunity to equip the aircraft with serious air-to-ground ordnance, a pair of TV-guided Kh-29T (AS-14 "Kedge") missiles from an ICM USSR weapon set and a pair of R-60 AAMs, leftover from an ESCI Ka-34. Furthermore, chaff/flare dispensers were added to the rear upper fuselage, as well as some antennae and the pitots.

Actually, this kitbash was less complicated as expected. Needed lots of putty, sure, but this would also have been needed on the OOB Su-15 from PM Models, as it is a primitive and crude model kit. Here, it found a good use. One drawback is, though, that the surface lacks detail: the PM Model Su-15 is bleak (to put it mildly), and the re-used A-7 wings lost much of their engraved details to leftover paint or sanding - paint tricks would have to mend this.

Painting and markings:

As a frontline service aircraft, this one would receive a tactical camouflage pattern. The Soviet Air Force offers a wide range of options, ranging from boring to bizarre, and I settled for a typical four-color camouflage with light blue undersides:

● Humbrol 119 (Light Earth)

● Humbrol 159 (Khaki Drab)

● Humbrol 195 (Chrome Oxide Green, RAL 6020)

● Testors 2005 (Burnt Umber)

● Humbrol 115 (Russian Blue) for the lower surfaces

The paint scheme was inspired by a East Germany-based Su-17, the colors are guesstimates, based on pictures of real-life Soviet aircraft.

Cockpit interior was painted in typical, infamous Soviet/Russian turqoise (*Argh*), the complete landing gear was painted in Aluminum (Humbrol 56); the wheel discs became bright green (Humbrol 131), di-electric panels (e .g. the fin tip) received a coat in Forest Green (Humbrol 149, FS 34092).

The model was weathered through some counter-shading with lighter tones of the five basic colors, a wash with black ink and some additional stains and blotches with different shades of green and brown, including Humbrol 98 118, 128, 151 - even some RLM 82 from Testors found its way onto the aircraft!

Decals and markings were puzzled together from various aftermarket sheets, and are based on real life pictures of Soviet/Russian aircraft based in Eastern Germany.

I also added some bare metal stains at the leading edges and soot stains around the gun. Since the kitbashed model was pretty bleak, I tried to add painted panel lines - using a thin brush and a mix of matt varnish and black. The counter-shading applied before enhances this effect, and if you do not look too closely at the model, the result is O.K.

Finally, everything was sealed under a coat of matt acrylic varnish.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Q-6 program was initiated in the mid-1970s when, during the Battle of the Paracel Islands in 1974, the People's Liberation Army Air Force (PLAAF) and People's Liberation Army Naval Air Force (PLANAF) proved incapable of ground support missions. Due to the lack of modern avionics and ground infrastructure to support a modern air war, Chinese aircraft suffered navigation and other logistics problems that severely limited their performance. The first Chinese aircraft did not actually reach the islands until several hours after the battle was over.

Dedicated ground attack variant with a solid, more slender nose and full PGM capability. The nose features a fairing with windows for an ALR-1 laser rangefinder/marked target seeker (LR/MTS) in a small ball turret, and possibly LLLTV/FLIR. This optical system offers day/night attack capability. Like the A-6B, these aircraft feature HUD, GPS, tactical radio and optional flare dispensers.

General characteristics:

Crew: 1

Length: 56 ft 1 in (17.10 m)

Wingspan: 47 ft 2 in (14.4m) at 16°, 28 ft 6 in (8,7m) at 72°

Height: 15 ft 9.5 in (4.82 m)

Empty weight: 16.520 lb (7.500 kg)

Loaded weight: 28.370 lb (12.880 kg)

Max. take-off weight: 32.820 lb (14.900 kg)

Powerplant:

1× Xian WS-9 Qin Ling afterburning turbofan (a license-built Rolls Royce RB.168 Spey Mk. 202), rated at 54,6 kN (5.562kp) dry and at 91,3KN (9.305kp) at full afterburner

Performance

Maximum speed: Mach 1.2 at low altitude and in clean configuration, subsonic with external ordnance; 1.055mph (1.700 km/h) at height and in clean configuration

Combat radius: 485 nmi (560 mi, 900 km)

Service ceiling: 49.180 ft (15.000 m)

Armament:

2× Type 23-III twin-barreled 23mm cannons in the wing roots with 200 RPG

7× Hardpoints (three under the fuselage, one under each fixed wing root and the mobile outer wings) for a maximum external ordnance of 10.000 lbs (4.540kg), including guided and unguided bombs, missiles, napalm tanks or 800l drop tanks; the two hardpoints under the outer wings are fixed and can only be used when the wings are kept in the most forward position (they are normally only used for drop tanks in ferry configuration).

The kit and its assembly:

This is a whif, but the Nanchang Q-6 was actually developed until 1989 – even though it never entered any service. It was over-ambitious and a dead end, overtaken by technological advances and the fact that Chinese development used to take decades rather than years.

Anyway, the Q-6 actually looked as if someone had glued the nose and air intake of a F-16 onto a MiG-23/27 fuselage - weird, but cool, so why not try this at home?

Like many kitbashing things, what sounds simple turned out to be a bit tricky in detail, even though the surgery was finally easier than expected. The model basis is pretty simple: I took an Academy MiG-27, sawed off the fuselage in the wing roots area (about 1cm, the cockpit section is an extra fuselage section), and did the same with an Italeri F-16 nose section, right behind the cockpit, where the front wheel well ends. The top insert for the single seater was left a bit longer, so that it would overlap with the MiG-23/27 spine.

When you fit these parts together, height is almost perfect, even the wing root/LERX angles match, but there are gaps left on the flanks where the original MiG-27 air intakes would be. These have to be covered, what creates lines reminiscent of the respective area on a MRCA Tornado. Furthermore, the spine behind the cockpit has to be sculpted, too.

Furthermore, the wing root levels of the MiG-23/27 and the F-16 did not match - they have a difference in height of about 4mm on the model, and this was the biggest challenge.

In order to compensate for this problem on my model, any LERX sign was removed from the F-16 nose. Inside of the F-16 section, a column was added that supports the rear upper half of the front fuselage, since the flanks had to go almost completely.

On the outside, the necessary intersections/extensions sculpted new with 2C putty, extending the MiG-23/27 lines forward. The final surface finish was done with NC putty. This major surgery was less complicated than expected - lots of work, though, but feasible.

The new front section with its blended fuselage/LERX area around the cockpit reminds surprisingly much of the MiG-29? As a side note: when you look at CG simulations of this aircraft, this area is a frequent field of trial and error. You find unconclusive, if not impossible designs.

Other changes include a less modern canopy from a MiG-21 (I think it comes from an Academy MiG-21F kit), which was more tricky to fit onto the original F-16 canopy than the LERX stuff. The F-16 canopy looked just too modern for my taste. An old Airfix pilot figure was added, too.

Another new feature is a new jet pipe, a J-79 nozzle from an Italeri Kfir that fits perfectly into the rear fuselage, and the fin. The latter was taken as a leftover part from my recent CF-151A project and comes from a 1:144 scale Tu-22M bomber (Dragon). It's higher, but less deep, and I thought that a slightly different shape and more area would be suitable for an attack aircraft. For the same reason the single, foldable stabilizer fin under the rear fuselage was replaced by two fixed strakes (from the F-16). Small details, but they change the look and make the aircraft appear more simple.

The landing gear was taken from the MiG-27, the front wheel strut had to be slightly shortened due to the reduced wheelbase on the Q-6.

The ordnance was puzzled together – according to current BAF weapons in use. I went for unguided missiles (taken from the Academy MiG-27 donation kit) and some 100kg iron bombs, leftover from a Trumpeter Il-28 bomber kit. These were arranged under the wing roots on improvised tandem MERs.

I did not even try to engrave new panel lines on the new front section - actually, almost the whole upper surface is featureless since it was made with putty. But bot 2C and NC putty are pretty touchy to drilling or engraving (as the rather fruitless attempt to drill open cavities for the two guns proved...), so I decided to just use paint effects.

Painting and markings:

I had been wanting to build a Bangladeshi Air Force aircraft for quite a long time, and the Q-6 was finally a great opportunity. As a ground attack aircraft, the livery was to reflect that role, and among modern BAF aircraft I found C-130 transporters carrying a wrap-around ‘Lizard’/’European One’ scheme, in the traditional tones of FS34102, FS34097 and FS 36081 (Humbrol 117, 149 and 32). Maybe the BAF C-130s are ex USAF aircraft? It seems to be common BAF practice to keep former users' liveries and even bort numbers! Anyway, I find the Lizard cammo on a swing wing aircraft like this rather disturbing, but overall the whole thing looks pretty cool, probably also because of the exotic roundels.

Another option would have been a two-tone green camouflage (seen on BAF An-32 transports) or a three-tone pattern of pale sand, dark brown and dark green with light blue undersides, seen on BAF A-5 fighters. The garish, blue livery of BAF MiG-29s, as well as the blue and grey patterns on BAF F-7 fighters, were ruled out, since they’d rather suggest an air superiority role.

The camouflage pattern is based on USAF A-10 aircraft, and the aircraft’s upper sides were thoroughly weathered with a black ink wash and dry-brushing in lighter shades of the basic tones. After all, my kit is to represent a Q-6 after more than 15 years of service, so that the grey would become much lighter, the dark green get a greyish-blue hue and the light green tone adapt an almost olive drab look. As a result, the aircraft does not look too dark and murky, and the missile ordnance does not stand out too much.

The roundels were improvised – Bangladeshi aircraft kits/decals are rare. AFAIK, only one 1:72 Fujimi MiG-21 offers a BAF markings option, otherwise I could not find anything else, even among aftermarket offerings. Scratching is more fun, though, so “my” markings are actually Pakistani roundels (from a TL Modellbau aftermarket sheet) with red decal discs covering the original white central disc.

The flag on the fin was cut from generic green decal sheet, the red disc was punched out from red decal sheet, just like the roundel additions. Straightforward – and highly effective! Other markings were puzzled together from the scrap box, since the Q-6 never got beyond prototype stage, anything was possible concerning stencils etc.

The bort numbers are guesstimates - typically, BAF (and also PAF) carry a full registration on the tail fin and only a three-digit code on the nose. Squadron emblems are only small and carried either on the nose or the fin, so the model is rather simple in appearance.

The cockpit interior was painted in "Russian Interior Blue-Green" (Testors 2135, a stuff also in use in China, as far as I can tell), the landing gear and its wells were kept in Aluminum (Humbrol 56). The air intake was painted in light grey from the inside, the radome became black.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

The Fiat Macchi C.170 Brezza ("Gust of wind") was a single-seat biplane fighter which served primarily in Italy's Regia Aeronautica before and in the early stages of World War II. The aircraft was produced by the Varese firm, and entered service, in smaller numbers, with the air forces of Italy, Austria and Hungary.

Although an obsolete design, it proved to be robust, durable and effective especially in severe conditions. In spring 1943, surviving C.170s were rounded up from training schools and delivered to night ground attack units operating on the Eastern Front. The C.170 was used to conduct night harassment sorties on the Eastern Front until September 1944, when the units were disbanded, due to a lack of serviceable airframes and spare parts.

General characteristics

Crew: 1

Length: 8.25 m (27 ft 1 in)

Wingspan: 32 ft 3 in (9.83 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 323 ft² (30.0 m²)

Empty weight: 3,217 lb (1,462 kg)

Loaded weight: 4,594 lb (2,088 kg)

Powerplant

1× Fiat A.74 R.C.38 14-cylinder air-cooled radial engine, 650 kW (870 hp) at 2,520 rpm for take-off

Performance

Maximum speed: 441 km/h (238 kn, 274 mph) at 20,000 ft

Cruise speed: 338 km/h (187 kn, 210 mph)

Range: 780 km (420 nmi, 485 mi)

Service ceiling: 10,210 m (33,500 ft)

Rate of climb: 11.8 m/s (2,340 ft/min)

Climb to 10,000 ft (3,050 m): 4.75 min

Wing loading: 69,6 kg/m² (15,3 lb/ft²)

Power/mass: 311 W/kg (0.19 hp/lb)

Armament

2× 12.7 mm (0.5 in) Breda-SAFAT synchronized machine guns above the engine, 370 rpg

Some aircraft were field-modified to carry up to 8× 15 kg (33 lb) or 2× 50 or 100 kg (110/220 lb) bombs under the wings

The kit and its assembly

Inspiration for this little, whiffy biplane came when I posted a pic of an Austrian Ju 86 bomber as a reply/ suggestion to a fellow modeler's (NARSES2) search at whatifmodelers.com for “something” to make from a Gloster Gladiator.

When I looked at the paint scheme a second time I remembered that I still had some Austrian roundels in stock, as well some very old biplane spare parts... hmmm.

Biplanes are tricky to build, even OOB, and kitbashing this kind of whif would not make things easier. Anyway, I love such challenges, and the potential outcome would surely look nice, if not exotic, so I decided to tackle the project.

Basically, the following donation ingredients went into it:

● Fuselage, engine, cockpit/pilot and tail from a Revell Macchi C.200 "Saetta"

● Upper wing from a Matchbox Gloster "Gladiator"

● Lower wings from a Matchbox SBC "Helldiver"

● Wheels from a Matchbox Hs 126 (shortened)

Pretty straightforward, but even though it would be a small aircraft model, it would come with two big challenges: mounting the lower wings and shaping the resulting, gaping belly, and the custom-made struts and wirings for the upper wing.

Work started with the Macchi C.200’s fuselage, which was built OOB - just without the wing, which is a single part, different pilot (the included one is a pygmy!) and with a free spinning metal axis for the propeller.

The wing installation started with the lower wings. I glued the Helldiver wings onto the C.200 fuselage, so that the wings' trailing edge would match the C.200's wing root ends. From that, a floor plate was fitted under the fuselage and any excessive material removed, the gaps filled with lumps of 2C putty. That moved the lower wing's roots backwards, creating space at the lower forward fuselage for the new landing gear.

The latter was taken from a vintage Matchbox Hs 126 reconnaissance aircraft - probably 25, if 30 years old... Size was O.K., but the struts had to shortened by about 5mm, as thge HS 126 is a much bigger/longer aircraft than the C.200. A cut was made just above the wheel spats, material taken out, and the separate parts were glued back together again.

With the lower wings in place I started building strut supports for the upper wing from styrene strips - tricky and needs patience, but effective. I started with the outer supports, carving something SBC-style from styrene. These were glued into place, slightly canted outwards, and their length/height adapted to the upper wing’s position.

When this was settled, the upper Gladiator wing was glued into place. After a thorough drying period the short fuselage supports in front of the cockpit – again, styrene strips – were inserted into the gap. This allowed an individual lengthening, and was easier than expected, with a stable result.

After having the upper wing glued in place I added some wiring, made from heated and pulled-out styrene sprues. This not only enhances the kit's look, it also (just like in real life) improves rigidity of the model. Also a tedious task, but IMHO worth the effort. I tried thin wire, nylon strings and sewing yarn for this job, but finally the styrene solution is what worked best for me.

The exhaust installation had also to be modified: the new Hs 126 struts with spats would have been where the original C.200’s hot exhaust gases would have gone, so I added new exhaust pipes that would go between the new legs.

Other small added details included, among others, a pitot on a wing strut, a visor in front of the cockpit, a radio antenna, a ladder made from wire.

Painting and markings:

I would not call the Austrian 3+1-tone pre-WWII-scheme spectacular, but the colors are unique. My scheme is based on an Austrian Ju 86 bomber from 1938, so it fits into the intended time frame.

The colors were puzzled together from various sources and are subjective guesstimates:

● A pale, yellow-ish beige (Humbrol 74, ‘Linen’, out of production)

● A rather brownish green (Testors 1711, ‘Olive Drab’, FS 34087)

● A dark green with a yellow-ish hue (Humbrol 116, ‘US Dark Green’ FS 34079)

● Light blue for the undersides (Humbrol 65, ‘Aircraft Blue’, RLM 65)

In order to add some details I painted the area behind the engine cowling in aluminum. The respective part under the fuselage, where the exhaust gases would pass, was painted in Steel – both Testors Metallizers.

The interior surfaces were painted in a neutral Grey – but with the engine and the pilot in place you cannot see anything of that at all.

Markings are minimal: the Austrian roundels come from a TL Decals aftermarket sheet, the flag on the rudder was laid out with red paint (a mix of Humbrol 19 and 60), the white bar is a decal. The tactical code is fictional, puzzled together from single digits in various sizes (also from TL Modellbau sheets). The original documents how purely black fuselage codes, but I found these hard to read. So I chose digits with a white rim (actually, these belong to modern German Luftwaffe tactical codes in 1:32), which improve contrast a little.

The kit received a thin black ink wash and some shading/dry-painting with lighter basic tones (Humbrol 103, 155, Model Master 2138,‘Israeli Armor Sand Grey’, and Humbrol 122). After decal application, another turn with overall Hemp and Light Grey was done in order to fade contrast and to emphasize the surface structure. The wires were also painted, but only with thinned black ink and a VERY soft brush.

Finally, everything was sealed under a spray coat of matt acrylic varnish.

Voilà, and done in just about a week!

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

Both Imperial Japanese Army and Navy Aviation (IJA and IJN, respectively) were very aware of the developments of jet engines, esp. through close contact with Germany and mutual exchange of blueprints and even hardware. But it was the IJN which basically drove jet-powered aircraft, e. g. through the Kyūshū J7W2 Shinden or Nakajima J9Y1 Kikka fighters.

The IJA was far behind schedule. Its primary jet projects had been conversions of existing, piston-engine-driven bomber types, but the increasing threat through high and fast incoming B-29 bombers, as well as the potential danger of even faster, jet-powered types, stirred the development of fast and agile interceptors with a heavy armament.

Since no such indigenous design existed (the IJA rejected the logical option to adapt an IJN types!), German engineers and design had a strong impact on what was to become the Ki-202 - a parallel development to the two-engined, heavier Ki-201 "Karyu", which resembled much the German Me 262.

The Ki-202 was developed by the Nippon Kokusai Koku Kogyo in a very short time frame: initial work started in late 1944, and the prototype was ready in summer 1945. The Ki-202 was regarded as a light, dedicated interceptor for spot defence, which should be produced in large numbers and with less investment of sparse resources and work labor per unit than the Karyu.

The Ki-202 was a very compact and simple aircraft. Outwardly it bore a striking resemblance to Kurt Tank's Ta 183 "Huckebein" jet fighter that had been under development in Germany since 1942, but the Ki-202 was much more simplified, both concerning construction and aerodynamics, as it was so direly needed and, beyond the jet engine, no big development risk was to be dared.

For instance, in order to avoid trouble with swept wings (which had not been incorporated in Japanese aircraft design yet, even though some wind tunnel test results already existed, as well as scientific input from Germany), the Ki-202 featured straight wings with a laminar-flow profile. The tail section was also different from the Ta 183: instead of the Ta 183's highly swept tail fin and a T-tail arrangement, the Ki-202 featured a relatively slender, staright tail boom above the jet exhaust, carrying a conventional stabilizer arrangement with only moderate sweep.

The fuselage resembled much Hans Multhopp's Ta 183, with a nose air intake, the pressurized cockpit placed above the air duct. The cockpot featured a frameless bubble canopy with an armored windscreen that offered an excellent field of view. Another novelty for the IJA was a tricycle landing gear that retracted into the lower fuselage. The engine (initially a single Ishikawajima Ne-20 turbojet, rated at 4.66 kN/475 kgf) filled the whole lower fuselage half. It lay between the main landing gear wells, with fuel cells above them and in the wing roots.

The aircraft had a rather stubby appearance, but turned out to be easy to handle and highly agile. Its weak spot was the Ne-20 engine, which was based on the German BMW 003 turbojet. Its low power output limited the Ki-202's performance so much that the initial prototypes (two were built) could only take off with reduced fuel - in fact, one of these machines was lost when it overrun the runway and crashed beyond repair.

Hence, only basic flight testing without any military equipment on board could be done until April 1945, and after the starting crash the other prototype was actually towed into the air, where it would, at safe height, power up its engine and perform a very limited test program.

When it became available in May 1945, a slightly uprated Ne-20-Kai engine was installed, but this measure hardly made the aircraft suitable to serious military service.

Things changed dramatically with the introduction of the much improved Ne-230 and Ne-330 engines. The latter had a thrust rating at 12.75 kN/1.300 kgf of thrust - nearly three times of what the early Ne-20 could deliver and close to the German 2nd generation Heinkel HeS 011 turbojet.

This new engine necessitated a slightly widened exhaust nozzle, and in the course of this modifications many detail refinements on prototypes #3 and 4 were made, including anti-flutter weights on the horizontal stabilizers and small wing fences.

In September 1945 this "new" aircraft eventually entered IJA service as "Ki-202 Kai", officially called 'Goryō' (御霊 - "Vengeful ghost") but also nicknamed 'Nezumi' (ネズミ - "Mouse") by its crews

The new type proved to be an immediate success. The Ki-202 Kai had a very good rate of climb, the short wings, coupled with a center-heavy CG due to the compact "pod and boom" layout, offered a very high manouverybility that was on par with contemporary Allied piston-engined fighters. As a bonus, its small size made the 'Goryō' a target which was hard to acquire or hit.

On the other side, the aircraft sported a powerful cannon armament (two fuselage-mounted 20 mm Ho-5 cannons, each with 150 RPG, plus two fuselage-mounted 30 mm Ho-155-II cannons, each with 50 RPG), and it was able to carry unguided air-to-air missiles under its wings, or two 150 L (40 US gal) drop tanks on either wing or a pair of 250 kg (550 lb) bombs.

On the downside, the Ne-330 engine had a very high fuel consumption rate, its throttle response was marginal, and its reliability was poor, especially in the initial production batches which suffered from material failures and lack of engineering experience.

General characteristics

Crew: one

Length: 8.96 m (29 ft 4 in)

Wingspan: 9,74 m (31 ft 10 1/2 in)

Height: 3,69 m (12 ft 1 in)

Wing area: 17.5 m² (188 ft²)

Empty weight: 2,380 kg (5,247 lb)

Loaded weight: 4,300 kg (9,480 lb)

Powerplant:

1× Ishikawajima Ne-330 engine with 12.75 kN/1.300 kgf of thrust

Performance

Maximum speed: 855 km/h (531 mph)

Stall speed: 140 km/h (92 knots, 106 mph) (power off, flaps down)

Range: 1.250 km (673 nmi, 776 mi)

Service ceiling: 14.000 m (45,932 ft)

Rate of climb: 20,4 m/s (4,020 ft/min)

Wing loading: 196 kg/m² (41 lb/ft²)

Thrust/weight: 0.37

Armament

2× 20 mm Ho-5 cannons with 150 RPG

2× 30 mm Ho-155-II cannons with 50 RPG

2× underwing hardpoints for up to 250 kg (551 lb) each

(for racks with unguided missiles, drop tanks or bombs)

The kit and its assembly:

A spontaneous project, inspired by a similar build (in French livery, though) on whatifmodelers.com some time ago, and an interim project while I waited for ordered decals for another whif on the bench.

I had a surplus Ta 183 from PM Models in store, and eventually considered it for conversion. When I recently got hands on several PZL TS-11 'Iskra' trainers from Master Craft, I eventually got the inspiration (and parts!) I needed and decided to make a kitbash, retro-fitting the rather futuristic Ta 183 with straight wings and a tail boom.

Conversion was rather straightforward, even though little from the Ta 183 was left: just the fuselage halves, air intake, canopy and parts of the landing gear. The Iskra 'donated' its wings and tail, as well as the front wheel.

Main wheels, cockpit interior, exhaust pipe and pilot figure come from the scrap box - noteworthy is the landing gear well interior. The PM kit just has a shallow, blank fairing - I cut that away and inserted parts from a jet engine (from a Revell F-16, the old kit which comes with a truck, trolley and a spare engine as props) - finally got use for these rather crude parts!

Some putty work was necessary at the fuselage/tail intersection, as well as at the wing roots, but overall the body work was rather quick and simple.

The packs of unguided missiles under the wings actually belong to the Matchbox BAC Strikemaster - I found an illustration of a similar arrangement on a Japanese rocket fighter, and they suit the 'Vengeful Ghost' well.

Painting and markings:

By tendency, I rather keep whifs' liveries simple and unspectacular - but I already have built some and want to avoid repetition. So I settled for an improvised camouflage scheme on bare metal, which I kept for the lower sides. AFAIK, such makeshift paint schemes were pretty common, and since no primer was used, quickly deteriorated.

To keep things simple I painted the finished model with Metallizer from Modelmaster, with different tones in selected areas (e. g. Aluminum Plate, Steel). After that I applied a thin coat of Humbrol 172 with a soft, broad brush on the upper surfaces, the waterline on the flanks masked with Tamiya tape. The metal below was to shine through, streaks were welcome, so that the finish became willingly uneven (and more interesting). This was later enhanced with some dry-brushed Humbrol 102 on top of that.

For more contrast, I added white Homeland Defence bands under the Hinomaru markings on wings and fuselage. These were cut from white decal sheet, not painted, and the Hinomaru placed on top of that. The yellow bands on the wings' ledaing edges are decals, too, a very effective method! The other few markings came from AeroMaster Decals and Microscale sheets.

Weathering included, beyond a wash with thinned black ink, a light sand paper treatment on the leading edges and in areas with much external contact, for an even shaggier look, and some grinded graphite was rubbed onto the bare metal surfaces for a worn look and some extra metal shine.

Finally, everything was sealed under a coat of semi-gloss acryl varnish.

A 'quickie', and the result looks a bit odd, IMHO - like a Saab 29 hatchling, maybe?

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.

Phicen kitbash using the blonde Kimi headsculpt .

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

Some background:

The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.

Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.

By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.

General characteristics:

Crew: two

Length: 8.92m (29 ft 3 in)

Wingspan: 34 ft 0 in (10.36 m)

Height: 11 ft 9 in (3.58 m)

Wing area: 317 ft² (29.4 m²)

Empty weight: 1,295 kg (2,855 lb)

Max takeoff weight: 1,700 kg (3,748 lb)

Powerplant:

1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)

Performance:

Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)

Cruise speed: 345 km/h (214 mph; 186 kn)

Stall speed: 60 mph (52 knots, 96 km/h)

Range: 373 mi (600 km; 324 nmi)

Endurance: 2 hours

Service ceiling: 10,600 m (34,800 ft)

Rate of climb: 2,982 ft/min (15.15 m/s)

Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds

Armament:

4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage

Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings

The kit and its assembly:

The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.

The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.

The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.

The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).

The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.

The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.

The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.

Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.

Painting and markings:

The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.

Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.

As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…

Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.

The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.

Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.

Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.