View allAll Photos Tagged kitbash
I easily took more pictures of this kit than any of my other Joes. I started with over a hundred photos, then weeded it down to forty, and (with much difficulty) cut it down to the final fourteen you see here!
I used a G1 Rumble for this custom and I added articulatied arms and legs, and also on his neck.
I also added some custom panels on his legs, to match the cartoon look.
The cannons on his back are now permanently attached at a more proper position.
Phicen kitbash using the Little Red Riding Hood headsculpt . For the life of me I still can't find a proper Phicen body that matches this particular headsculpt ,this is the pale body and it still doesn't match , so frustrating >:(
I wasn't happy with the stock sidewalks so I made my own. It's much larger than the kit's. I did this for outside detailing.
I also glued strip styrene for bracing the walls.
A kitbash using a Phicen body with a Scarlet Witch headsculpt by Hot Toy's and an outfit by Super Duck .
N-Scale Transformer Transport
Kenworth W900 Heavy Hauler. The Tractor was equipped with a Tri-Axle and at the Sleeper the roof has been edited. The Hydraulic Multi Axle Platform Trailer is kitbashed from two german "Arnold Strassenroller" and some Detail Parts. The complete Model was painted and equipped with selfmade Decals and Flags. Loaded is a Transformer from a german Minitrix Freight Car.
An dem Kenworth W900 von Herpa wurde die Zwillingsachse entfernt und durch drei Achsen von Classic Metal Works ersetzt. Das Hochdach der Schlafkabine wurde abgetrennt und mit einer Plastikplatte verschlossen und beigespachtelt. Der Hydraulic Multi Axle Platform Trailer entstand aus zwei Arnold Straßenrollern, einer Plastikplatte und der Sattelkupplung eines Wiking Tieflader-Aufliegers. Die Hydraulikanlage auf der Sattelkupplung kommt von einem Maruka Bergekran und einem Athaern Fire Truck. Das ganze Modell wurde farblich angepasst und mit selbstgemachten Warnschildern und -flaggen ausgestattet. Der Trafo stammt von einem Minitrix Güterwagen.
I then used the dremel and shaved the excess material off. I then hand sanded the corners to a 90 degree angle.
a fellow boardie over at the 3A Forum, name of wwwetworks, asked me if i'd liked to paint up one of his cool kitbash customs.
it's based on ashley woods Adventure Kartel (AK) Zombot, with added WWRp Bramble arms.
of course i said yes!
what's cooler than to paint up a zombie???
it was a lot of fun, indeed!
thanks again for this cool job, carlo!
Built it from lots of random parts, and added on some cool features.
- When the table is tilted it makes a "bzzzt" mechanical type noise
- Button on bottom front of table makes light on front of table blink and sound effects
- slider button on front of table makes light blink and more sound effects
- foot rest is on a hinge
- button on base of table makes 4 sound effects
- plastic tubes filled will blue dyed water (like energon) and plugged on the ends.
- back of table has 2 prong like things that automatically swing out when level is pressed
- string of LED lights does a "chase" type lighting sequence
I started to add street signs below on the street level. I still need to add interior ground floor details.
As well as a sidewalk and weather ground level areas. I need to add trash can, people, etc.
A kitbash using a Phicen body with a Scarlet Witch headsculpt by Hot Toy's and an outfit by Super Duck .
I used a G1 Rumble for this custom and I added articulatied arms and legs, and also on his neck.
I also added some custom panels on his legs, to match the cartoon look.
The cannons on his back are now permanently attached at a more proper position.
I created two development proposals signs. These are very small...I used the dime as a size comparison.
Notice in the blown up version..Quinntopia Architects and designs... :D
A tribute to my friend Jerry.
Greenmax kitbash kits 29 & 30 I then cut some square styrene channel keeping it white and added some trees. I used brown plastacine to mold dirt and hold the trees in the square planters. if you don't have dirt yellow, blue, and red make brown. :D
Revenge of the Fallen : Wheelie
c/o BigHank Wheelie's electronics light up his eyes AND thanks to a microchip, if the "faction gimmick" is turned to "Decepticon" the eyes are both RED, if turned to "Autobot" his left eye "burns out" and becomes BLUE.
I did some minor mods to his arms, allowing more articulation, added some wires to them as well. Add-on antennae for his RV alt mode.
Greenmax kitbash kits 29 & 30
Here the top section glued together. you can see I used to top floor pieces of kits 30 for the top and bottom of this section. it created a top and bottom effect.
CSX BQ23-7 #3008 in the early CSX 1st paint scheme. Conductor side front side 3-4. This HO Scale kitbash - started out from an Atlas B23-7, and Bachmann BQ23-7 shell. The Bachmann shell sacraficed her shell, which was cut out just behind the cab, It was then cut again down the middle to narrow the width. June-2014 - Kris Crawley
Greenmax kitbash kits 29 & 30
the side pieces didn't have the flat topped finished so I glued a thin piece of styrene behind the upper floor windows to match, then after painting you couldn't tell the difference.
Seminole Gulf - F9AM #501
This is a Bachmann HO Scale F7A, modified to more closely represent the prototype unit.
You can see many of the modifications in this photo including
1: Removed dynamic brake fan
2: Changed out headlight
3: Filled in nose door
4: Replaced number boards with homemade square type
5: Added marker lights
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The Messerschmitt Me 262 Schwalbe or Sturmvogel (English: "Swallow"/ "Storm Bird") was the world's second operational jet-powered fighter aircraft. Design work started before World War II began, but engine problems and top-level interference kept the aircraft from operational status with the Luftwaffe until mid-1944.
The Me 262 was faster, and more heavily-armed than any Allied fighter, including the British jet-powered Gloster Meteor which entered service in the UK a month earlier than the Me 262. One of the most advanced aviation designs in operational use during World War II, the Me 262 was used in a variety of roles, including light bomber, reconnaissance, and even experimental night fighter versions.
The latter was a variant that was direly needed, and the development of a fast night fighter led to several prototypes and an operational interim version. Several two-seat trainer variants of the Me 262, the Me 262 B-1a, had been adapted through the Umrüst-Bausatz 1 factory refit package as night fighters, complete with on-board FuG 218 Neptun high-VHF band radar, using Hirschgeweih ("stag's antlers") antennae with a set of shorter dipole elements than the Lichtenstein SN-2 had used, as the B-1a/U1 version. Serving with 10 Staffel, Nachtjagdgeschwader 11, near Berlin, these few aircraft (alongside several single-seat examples) accounted for most of the 13 Mosquitoes lost over Berlin in the first three months of 1945.
Anyway, the Me 262 B-1a's deficiencies were clear from the start and in parallel Messerschmitt already worked on a dedicated night fighter variant that would offer a better performance (primarily concerning range and speed) than the converted trainer, which was, nevertheless, rushed into service and gathered valuable information.
Initially, the idea of a night-fighter 262 was developed independently by Messerschmitt as the Me 262B-2. It was to have a longer fuselage accommodating the two crew, internal fuel tanks with the capacity comparable to that of a single-seat variant, and a Berlin radar antenna hidden inside the modified nose cone. However, by the end of 1944 the war situation deteriorated so rapidly that it was realized that an interim solution must be found before the B-2 could reach production status.
Instead of the complex B-2 Messerschmitt also proposed a less ambitious approach which would use as many Me 262 fighter components as possible, primarily the aerodynamic surfaces, the engines and the landing gear. This proposal was accepted by the RLM in September 1944 and became the Me 262 G.
This variant received a completely re-designed and aerodynamically refined fuselage. It was, from the start, tailored to carry the heavy radar equipment, a second crew member as radar operator and navigator and a bigger fuselage tank (the trainers that were converted into night fighters had part of their fuel capacity reduced to make place for the 2nd seat). The result was a slender, streamlined aircraft with a considerably smaller cross section than the Me 262 day fighter/bomber.
The crew was separated into two cabins in front and behind the fuselage main tank. This arrangement also offered enough space for a "Schräge Musik" installation (a pair of guns firing upwards, either two 20mm MG 151/20 or two 30mm MK 108), to allow the night fighter to attack RAF bombers from their belly blind spot.
The main armament was a pair of MK 103 30mm cannons - while this was a reduction of firepower compared to the Me 262 B-1a, the MK 103 was much more accurate, had a longer range and a much higher muzzle velocity (860 m/s (2,822 ft/s) versus 540 m/s (1,800 ft/s) with HE/M), so that targets could be engaged at longer distance with less expenditure of ammunition and further outside of the bombers' defensive fire.
The first operational version, the G-1, was ready for service in December 1944 and exclusively delivered to the NJG 6, based in southern Germany after withdrawal from Romania and regrouping.The G-1 still carried the FuG 218 Neptun radar, still coupled with a high drag Hirschgeweih antenna and with a FuG 350 Zc Naxos radar warning receiver/detector, but the G-1 was still faster than the B-1a and had a longer range on internal fuel than the B-1a with two external 300l drop tanks, which further reduced top speed. Later versions (G-2) were supposed to carry the more modern FuG 240 with a parabolic dish antenna under a more treamlined thimble nose radome, and a single seat long range reconnaissance version (G-3) was also planned, which would carry no guns but an camera array in the radar operators's place.
Anyway, only about 20 Me 262 G-1 were delivered to NJG 6 at all, and probably less than a dozen were operational when Germany surrendered. The G-3 recce variant remained on the drawing board, while two prototypes with radomes for the FuG 240 were under construction and underwent wind tunnel tests.
General characteristics:
Crew: 2
Length overall: 11.67 m (38 ft 3 in)
Wingspan: 12.60 m (41 ft 6 in)
Height: 3.50 m (11 ft 6 in)
Wing area: 21.7 m² (234 ft²)
Empty weight: 3,795 kg[101] (8,366 lb)
Loaded weight: 6,473 kg[101] (14,272 lb)
Max. takeoff weight: 7,130 kg[101] (15,720 lb)
Powerplant:
Aspect ratio: 7.32
Powerplant:
2× Junkers Jumo 004 B-1 turbojets, 8.8 kN (1,980 lbf) each
Performance:
Maximum speed: 900 km/h (559 mph)
Range: 1,050 km (652 mi)
Service ceiling: 11,450 m (37,565 ft)
Rate of climb: 1,200 m/min (At max weight of 7,130 kg) (3,900 ft/min)
Thrust/weight: 0.28
Armament:
2x 30mm MK 103 cannon in the lower front fuselage with 120 RPG
2x 30mm MK 108 cannon "Schräge Musik" installation with 80 RPG,
angled 70° upwards, between the cockpits
2x hardpoints under the wings, each able to carry up to 250kg (550lb), including bombs, drop tanks or unguided missiles (rarely used)
The kit and its assembly:
Connoisseurs will immediately recognize this kitbash - and the Me 262 G was spawned from the thought that the Japanese Ki-46 was such an elegant aircraft - wouldn't a jet version somehow make sense? So, initially this was supposed to become a Hikoki '46 model, but when I held some Me 262 parts next to the Ki-46's fuselage the idea of a Luftwaffe night fighter was born.
And this actually worked better than expected. This whif is a kitbash of an Airfix Ki-46 fuselage with wings, tail, engines, landing gear and Hirschgeweih from a Revell Me 262 B-1a.
Mating the parts went pretty straightforward, even though I made a mistake when I measured the position of the wing under the fuselage. Somehow it ended up 4-5mm too close to the nose - while the flaw was acceptable I decided to add a 5mm plug behind the pilot cockpit to compensate... And the added length just underlines the elegant Ki-46 lines.
In order to keep the model on its three feet lots of lead beads were hidden in the fuselage, the nose tip and even the front ends of the engine nacelles. Since the Ki-46 fuselage is considerably smaller than the Me 262's I had to fill the wing roots with putty, but that was a rather easy task.
Painting and markings:
I wanted something different from other German night fighters/bombers I had already built, yet a simple livery. Since many German night fighters left the factories in an overall RLM 76 finish I used this as a basis and just added mottles in RLM 75 on the upper surfaces - inspired by a Ta 154 Moskito night fighter prototype.
The cockpits were painted in very dark grey (RLM 66) while the landing gear and the respective wells were painted with RLM 02. Everything very conventional.
The markings were puzzled together - the national markings and stencils come from the Revell Me 262 B-1a sheet while the registration was created from single aftermarket letters, matching a hypothetical aircraft from 4. Staffel, II./NJG 6 in code and colors.
The kit received a light black in wash and some dry-brushing to emphasize panel lines. On the fuselage, however, I painted some panel lines with a pencil, since the Airfix Ki-46 is completely bare of details. Some soot stains around the guns were added with graphite and finally everything sealed under matt acrylic varnish.
A simple kitbashing project, and I am amazed how plausible the Ki-46/Me 262 mix looks, despite the mistake I made with the wing position. I wonder how a Ki-46 III with its streamlined cockpit would look in this case?
After making the sidewalk section ... I added an interior wall.. I wanted to have workers exiting the building...
This is the building unpainted, not glued together and still in rough shape. Just resting on itself. I have much much much more work to do to it.
just a few shots of my colonial marine figure, don't have anything new at the moment but I had to get out and take some shots today
Nimby's... every town has to have them.
I made the picketers and signs.
I made these by printing off signs off photoshop elements on the computer. I printed them on regular paper. I then used styrene glue gel to glue the paper to thin sheet styrene. Once it was dry I cut the styrene and signs with regular scissors.
I later painted the wood posts brown.