View allAll Photos Tagged configuration
Lab Purpose:
Master switch basic configuration.
Master switch port security configuration.
Lab Requirement: finish basic configuration including ip address, default gateway.
Enable port security on Fa0/3 to allow maximum 10 mac address to be learn, others
will be dropped.
Click the below links to view the complete lab configuration.
This is the configuration I used to do the 165 second stability test of the Joby Gorillapod SLR_Zoom, with the camera in vertical position. Notice that the leg on the left is curled, so it touches the ground and goes back up to support the outside edge of the camera. It felt solid and safe, and took about 15 seconds to configure.
I used this configuration because the Gorillapod was difficult to configure in the traditional stance, with three (kind of) straightened legs; It took 90 seconds to configure, and did not feel safe and steady… however, I was able to get a 2 minute exposure without any blur.
I was also able to use vertical orientation with good results by removing the ballhead and Z-Finder bracket, But, I still prefer wrapping the leg up so it supports the camera body, even though the camera is an inch or two closer to the ground.
The tripod is rated to hold a camera that weighs 3 kg (6.6 lbs.). This is a Canon 5D mark II, Canon EF 100mm f/2.8L IS USM Macro Lens, and the mounting bracket for a Zacuto Z-Finder Pro 3x. Total weight; about 1.5 kg (3.3 lbs). The Z-finder bracket added about 30 g, and put the camera farther from the center of gravity of the Gorillapod, but, I wanted a worst-case-scenario.
Lab Purpose: Master OSPF basic configuration.
Master manually assign RID(Router ID).
Master how to modify ospf interface priority.
Observe DR BDR selection process.
Lab Requirement: R3 would be the DR,R2 would be BDR, R4 will not
participate in the selection.
Click the below links to view the complete lab configuration.
System configuration:
Alternator: Panasonic
Power control: Chint
Main alternator: Panasonic (Japan)
Compressor: AIRTAC (Taiwan)
Sensor: Omron (Japan)
Switch board: Chint (China)
Focusun is the world leader in ice making, chilling and refrigeration systems.
More information about our products on Focusun website: www.chinaicemachine.com
A look at the warehouse and the rigorous Assembly Configuration Testing (ACT) Process . Throughout the ACT process SOLiD ensures the quality of every piece of equipment before it leaves our warehouse and is shipped out to our customers. The quality and modularity of SOLiD's product make it the standard for excellence for DAS and In-Building wireless connectivity.
Lab Purpose: Master "router on a stick" configuration.
Click the below links to view the complete lab configuration.
Configuration recommandée:
PC de bureau:
- Windows XP SP 2 / Vista SP 1
- Pentium 4 2 GHz ou Athlon XP 2000+
- 1 Go de RAM (1,5 Go pour Vista)
- Carte graphique 128 Mo Nvidia GeForce FX 5900 / ATI Radeon 9500
PC portable:
- Windows XP SP 2 / Vista SP 1
- Pentium 4 2,4 GHz ou Athlon 2400+
- 1,5 Go de RAM (2 Go pour Vista)
- Carte graphique 128 Mo Nvidia GeForce Go 6200 / ATI Radeon mobile 9600
Product configuration: RT600-T-2-03-HV2-HD13-BT1R
RT600: RunnTech RT600 series Hall effect miniature joystick controller;
T: self-resetting operation;
2: dual axis control;
03: Y & X axis 360° free movement;
HV2: input: DC 5V, output: 0.5V~2.5V~4.5V;
HD13-BT1R: joystick grip with 1 momentary pushbutton;
RunnTech 2 Axis Hall Effect 0.5 to 4.5V Analog Output Precision Fingertip Joystick with Momentary Pushbutton
About RunnTech RT600 series hall effect joystick
RT600 series industrial Fingertip non-contact Hall effect joystick, ideal applications include: Medical imaging system, Measurement equipments, Automative control, Picture disposal devices, Move photography CCTV control system, Robotic operations, Optical instruments, Surveillance monitoring, Studio related apparatuses, Audio video editing equipments, Navigation systems, Electromotive wheelchairs, Military equipment, Special vehicles, etc.
FlexTT5 Configuration Samples
C1 for Canon Flashes.
so far, this has been the best setting for HyperSync on
5D MarkII with 580EXII
got no curtain upto 1/320. little lower curtain on 1/400.
i want 1/500! :<
Configuration 1.2 a lounge that is made of mailing tubes, egg crate foam, and white oak. This is a lounge type that can be used as other seating arrangments in a comfortable manner.
With its "Patroller" module, the Bluenose becomes a long range interceptor.
More photos and backstory: www.mocpages.com/moc.php/214354
Roof structure configurations that form modular trough-spaces include vaults (A)and folded-plates (B) suitable for unglazed and glazed, fixed and tracking solar collectors, e.g., big interior CPCs, one-axis parabolic troughs, and Fresnel linear reflectors.
References:
Wilby, C.B., Concrete Folded Plate Roofs, Arnold-Wiley Pub, 1998
Minneapolis-St.Paul International Airport in the article: Airport Architecture, Progressive Architecture magazine, April 1963.
This is 4 different pictures I combined into one. The tern hovers against the on-shore breeze (top two pictures), wheeling around as necessary so that he can keep watch on a likely patch of shallow water right below - and then on spotting a likely morsel, he suddenly appears to fold his wings (bottom two pictures) and tip forward into a power dive into the water where he catches a bite to eat.
Parameter configuration table and picture display of JMC 16m aerial operating vehicle - double row 4 doors
1. The basic parameters of the vehicle:
Serial number
name
Model and specification
1
Vehicle brand
Chengliwei - aerial operating vehicle
2
Product number
CLW5050JGKJ5
3
Chassis model
JX1061TSG25
4
Maximum working height
16 meters
5
Work bucket
The height of the platform from the ground≥14.3m
Maximum operating range of the platform≥6.92m
Operating range at the maximum operating height of the platform≥2.26m
Operating height at the maximum operating range of the platform≥9.2m
Rated load of working bucket 200kg
Outrigger
Method: H-shaped outrigger
Quantity: 4
Control: Individually adjustable or linked.
Transverse span: 2680mm
Longitudinal cross play: 3050mm
Hook
The maximum lifting weight is ≤1000kg, and the safety value is 800kg.
Maximum lifting height 6.3m
Main operation
Operating position: double working position operation of turntable and hanging rail.
Control mode: manual hydraulic or electronic control operation.
6
Hoarding and platform board
Steel tool box and hoarding, pattern anti-skid platform
7
Boom structure
Three-section folding arm
8
Slewing device
Two-way 3600 continuous rotation
9
engine
JX493ZLQ5 Jiangling engine 85kw (115 horsepower)
10
Vehicle size
7300×2000×3100
11
Total mass
5390kg
12
Curb quality
5065kg
13
Wheelbase
3360mm
14
Environmental protection / exemption
Yes/Yes
2.
3 Best Gaming PC configuration under Rs 40000 India 2014
3 Best Gaming PC configuration under Rs 40000 India 2014 : It is relatively easy to choose components and build a gaming RIG for a 5oK plus budget but as we keep lowering the budget it becomes relatively difficult. Choosing the parts a...
candytech.in/3-best-gaming-pc-configuration-under-rs-4000...