"The TEETH! Fix the teeth!"

I've always planned to fix the teeth but had put it off while building the rest of the figure. Realized after the last update that it was becoming more of an issue to some...and I get it believe me! So before any further updates, I chose to revise the sculpt yesterday.

Sculpt progress on the Praetorian Xenomorph (Egg Morpher) - Aliens: Defiance - 1:18 scale. A work in progress.

A little less friendly I hope? LOL! Sculpted the entire set of teeth once again along with the rim that goes above the gum line.

The Defiance Praetorian featured teeth that resembled that of the Deacon newborn from Prometheus - human teeth (very creepy) with a protruding jaw that contained the fangs. I still plan to sculpt a version that features those teeth, just not as big as the original sculpt. Variation is a beautiful thing. #alien #aliens #defiance #darkhorsecomics #praetorian #covenant #nostromo #sulaco #sculpture #aves #avesfixit #avesstudio #sculpting #customactionfigure

Sculpt update on the NEWBORN - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt by Aves Studio LLC

Sculpted hips and began working the upper arms.

Realized I need to thin out the lower back a bit and complete some detail just behind the shoulders before I can replicate (mold/cast) and head on to the next stage. Loving the elongated arms of this beast....

At this point with the project, I have pretty much caught up to the point where I left off with the Covenant Xenomorph, Neomorph and Defiance Praetorian - arms and legs. So expect a variety of updates, not JUST the Newborn from this point forward.

More updates to come! Perhaps some Star Wars updates soon? Bringing some back to the workbench. #alien #alienresurrection #newborn #ripley8 #studioadi #sculpture #avesfixit #avesstudio studioADI

7.5.22 Sculpt update on Skorr from the classic Goodwin/Williamson Marvel comic strip The Bounty Hunter of Ord Mantell.

Finally got his britches on LOL! Well, mostly...still lacking in the lower abdomen. I finished sculpting the legs the other night. Still retains the double joint articulation in the knees.

After finishing the lower abdomen, I'll begin sculpting the upper and lower arms.

More to come! I'm very interested in sculpting more of these classics, sometimes "campy", Star Wars characters from years ago.

#starwars #darkhorsecomics #marvel #archiegoodwin #alwilliamson #classicstarwars #skorr #bountyhunterofordmantell #bountyhunter #sculpting #art #customs #customactionfigure #hobby #epoxy #avesfixit #avessculpt #miniature

3.5.22 sculpt update for the "Tropical Rain Forest" Cantina Concept creature. Based off the Ron Cobb cantina concept drawing and the illustration shown in the Dark Horse Comics series Star Wars: Knights of the Old Republic.

1:18 (3.75") scale.

So this figure is literally based on two images. One, a concept drawing by Ron Cobb for a Cantina patron in A New Hope and the other, a single comic panel from the Dark Horse Comic series, Knights of the Old Republic. Both can be seen here.

I based this initial head sculpt on the KOTOR panel several years back when I delved heavily into the story arc. Its a great comic series…please check it out! Now I’m finding I want to develop BOTH the comic version and the concept.

The body I’ve begun building here is based off the concept or plant version. The idea is to create a base in which to sculpt the floral around, adding joints to provide articulation points when needed. I don’t want this to be a static figure but understand it can’t function the same way as a traditional action figure.

The KOTOR version however can surely be a full blown action figure and I’m equally excited about creating it.

So expect to see an additional head sculpt to match Ron Cobb’s concept as well as a new body frame of the KOTOR character. Basically there’s going to be two figures created from this idea which will be fun.

More to come! Thanks again!

#starwars #darkhorsecomics #ronbobb #cantina #anewhope #sculpting #art #customs #customactionfigure #hobby #epoxy #avesfixit #avessculpt #miniature

"The TEETH! Fix the teeth!"

I've always planned to fix the teeth but had put it off while building the rest of the figure. Realized after the last update that it was becoming more of an issue to some...and I get it believe me! So before any further updates, I chose to revise the sculpt yesterday.

Sculpt progress on the Praetorian Xenomorph (Egg Morpher) - Aliens: Defiance - 1:18 scale. A work in progress.

A little less friendly I hope? LOL! Sculpted the entire set of teeth once again along with the rim that goes above the gum line.

The Defiance Praetorian featured teeth that resembled that of the Deacon newborn from Prometheus - human teeth (very creepy) with a protruding jaw that contained the fangs. I still plan to sculpt a version that features those teeth, just not as big as the original sculpt. Variation is a beautiful thing. #alien #aliens #defiance #darkhorsecomics #praetorian #covenant #nostromo #sulaco #sculpture #aves #avesfixit #avesstudio #sculpting #customactionfigure

Sculpt update on the Newborn - Alien: Resurrection - 1:18 scale work in progress.

Sculpt made using Aves FIXIT sculpt from Aves Studio LLC

Revisions to one side of the head sculpt. Cleaned up some of the details, softened others and lengthened the skull a bit. Now that I have the proportions close to where I want them to be, I can fill in the void on the other side of the cranium LOL! Price paid when working with this material - a little progress at a time. The payoff is worth it though.

Next up, complete the cranium, sculpt the mouth and lower jaw....and that tongue! LOL!

More to come! #alien #aliens #resurrection #newborn #hybrid #queenkiller #sculpture #avesstudio #avesfixit #aves #customactionfigure

7.5.22 Sculpt update on Falco Sang - Bouthy Hunter/Assassin from the Dark Horse comic series Star Wars: Dark Times.

Been several weeks since I made any progress on this figure. This update centers on the alternate head sculpt.

After looking over the character studies Doug Wheatley did for the story arc, I made a small change to the bridge of the character's nose by adding a dorsal hump to the bridge. I also added the hair and recently detailed the ears more as the initial sculpts looked too simplified and a little large in proportion.

I'm only going to update with the more recent images taken but you can find more of my progression when I upload all the images over the past several weeks on my FLICKR photostream soon...I'll post a link once updated.

Working on some better articulation to the waist and will sculpt the lower legs and feet soon.

More to come! Thanks again for your continued interest in my work!!! It never gets old to inspire and seek inspiration from other great artists in the custom community.

#starwars #expandeduniverse #customactionfigure #darktimes #bountyhunter #sculpting #avesfixit #avesclay #miniature #darkhorsecomics

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

Sculpt update to the Queen - ALIENS - 1:18 scale.

It's gotta get ugly first, with markups, roughly sanded areas....the payoff though will be worth it. A quick update showing the area where I will be centering my attention over the next several days....

#queen #aliens #xenomorph #custom #actionfigure #sculpture #avesstudio #avesfixit

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

Update on the 1:18 scaled Newborn from Alien: Resurrection.

What you see here is the master sculpt in the middle with plastic casts of variant expressions of the beast surrounding it.

I recently finished casting several upper and lower arms along with the creature's left hand. I will begin cleaning those parts up and assembling them. I have several upper body/head sculpts that feature different facial expressions seen in the film. I wish I could figure out a way of articulating the head separately from the upper torso...but not even the original producers could figure out a way to do that. The creature was so static in the film.

Many of you have a love/hate...or just hate (LOL) relationship with this creature. I love the form, and the appearance of the monster...but it was handled so badly in the film and its death was way over the top in my opinion. That being said, there was a few great shots of the beast in the film...enough to inspire this project which I'm happy to continue working on.

Working on sculpting the hips and legs. Still intend for this figure to have articulation.

#alien #alienresurrection #newborn #sculpture #miniature #customactionfigure #aves #avesfixit #smoothon #xenomorph #ripley8

Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt by Aves Studio LLC

Began sculpting detail to the upper torso as well as building the shape to the lower half. The main articulation point in therein body will be a ball joint just below the ribcage separating the upper/lower torso. Finer details have not been added yet - I work in stages when sculpting with epoxy since it usually only has a 4 hour cure time.

Hope you enjoy the new work in progress pics. More project updates coming soon. #alien #alienresurrection #newborn #miniature #customactionfigure #avesfixitsculpt #sculpture #ripley8 #studioadi studioADI

Sculpt update on the Newborn - Alien: Resurrection - 1:18 scale work in progress.

Sculpt made using Aves FIXIT sculpt from Aves Studio LLC

Revisions to one side of the head sculpt. Cleaned up some of the details, softened others and lengthened the skull a bit. Now that I have the proportions close to where I want them to be, I can fill in the void on the other side of the cranium LOL! Price paid when working with this material - a little progress at a time. The payoff is worth it though.

Next up, complete the cranium, sculpt the mouth and lower jaw....and that tongue! LOL!

More to come! #alien #aliens #resurrection #newborn #hybrid #queenkiller #sculpture #avesstudio #avesfixit #aves #customactionfigure

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

Sculpt update on the Newborn - Alien: Resurrection - 1:18 scale work in progress.

Sculpt made using Aves FIXIT sculpt from Aves Studio LLC

Revisions to one side of the head sculpt. Cleaned up some of the details, softened others and lengthened the skull a bit. Now that I have the proportions close to where I want them to be, I can fill in the void on the other side of the cranium LOL! Price paid when working with this material - a little progress at a time. The payoff is worth it though.

Next up, complete the cranium, sculpt the mouth and lower jaw....and that tongue! LOL!

More to come! #alien #aliens #resurrection #newborn #hybrid #queenkiller #sculpture #avesstudio #avesfixit #aves #customactionfigure

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

Sculpt update to the Praetorian Xenomorph (egg morpher) - Alien: Defiance - 1:18 scale work in progress.

Sculpt using Aves FIXIT from Aves Studio LLC

Forgive the skinny arms and clay spots holding everything together LOL! Using some wax clay to bring in all the parts to show how the figure is coming along. The arm frames are prior castings of the 79 Alien along with acrylic rods to make the appendages longer - the length of the creature's limbs are to be exaggerated just bit. In my opinion the elongated limbs brings with it that "creep" factor. The next step will be to sculpt the arms and begin work on the tail...which will conatin a good amount of detail.

More to come! #alien #aliens #darkhorsecomics #defiance #aves #avesfixit #sculpting #xenomorph #praetorian #eggmorphing #customactionfigure

Sculpt update on the Newborn - Alien: Resurrection - 1:18 scale work in progress.

Sculpt made using Aves FIXIT sculpt from Aves Studio LLC

Revisions to one side of the head sculpt. Cleaned up some of the details, softened others and lengthened the skull a bit. Now that I have the proportions close to where I want them to be, I can fill in the void on the other side of the cranium LOL! Price paid when working with this material - a little progress at a time. The payoff is worth it though.

Next up, complete the cranium, sculpt the mouth and lower jaw....and that tongue! LOL!

More to come! #alien #aliens #resurrection #newborn #hybrid #queenkiller #sculpture #avesstudio #avesfixit #aves #customactionfigure

1/23 Sculpt update on the droid AL1-L3 "Allie" - Star Wars: the rise of Skywalker - 1:18 scale.

Sculpt using Aves FIXIT Sculpt. A two-part epoxy.

A work in progress sculpt of the head.

The first image is kind of an ode to C3PO from the Phantom Menace showing the wires and such behind the face plating of the droid. This idea didn't last long as the additional layers of epoxy bonded too well to the sculpt, making it impossible to pry the sculpted face plate loose without breaking it. So this sculpt is lost unfortunately...not that I can't sculpt another one if I'd need to later

The remaining images are of the face plate. Adjustments need to be made - squaring off the chin and reducing the jaw a bit. It's a bit too round at this point. The interior place (where the nose and mouth would be) needs a bit more clay added. The back to he head, behind the plate, will contain wires, motors etc - plenty of detail.

The ocular lens detail has softened due to additional sculpting around them so I plant bring those details back before molding the final head sculpt. The helmet will be a separate sculpted piece.

Having fun with this character! Reminds me of the enjoyment when I was sculpting Furlag ❤ More updates to come! Thanks for your continued interest!

#al1l3 #starwars #riseofskywalker #droid #droids #creatureshop #miniature #avesclay #avesfixit #sculpture #customactionfigure #actionfigure #375

1/23 Sculpt update on the droid AL1-L3 "Allie" - Star Wars: the rise of Skywalker - 1:18 scale.

Sculpt using Aves FIXIT Sculpt. A two-part epoxy.

A work in progress sculpt of the head.

The first image is kind of an ode to C3PO from the Phantom Menace showing the wires and such behind the face plating of the droid. This idea didn't last long as the additional layers of epoxy bonded too well to the sculpt, making it impossible to pry the sculpted face plate loose without breaking it. So this sculpt is lost unfortunately...not that I can't sculpt another one if I'd need to later

The remaining images are of the face plate. Adjustments need to be made - squaring off the chin and reducing the jaw a bit. It's a bit too round at this point. The interior place (where the nose and mouth would be) needs a bit more clay added. The back to he head, behind the plate, will contain wires, motors etc - plenty of detail.

The ocular lens detail has softened due to additional sculpting around them so I plant bring those details back before molding the final head sculpt. The helmet will be a separate sculpted piece.

Having fun with this character! Reminds me of the enjoyment when I was sculpting Furlag ❤ More updates to come! Thanks for your continued interest!

#al1l3 #starwars #riseofskywalker #droid #droids #creatureshop #miniature #avesclay #avesfixit #sculpture #customactionfigure #actionfigure #375

1/23 Sculpt update on the droid AL1-L3 "Allie" - Star Wars: the rise of Skywalker - 1:18 scale.

Sculpt using Aves FIXIT Sculpt. A two-part epoxy.

A work in progress sculpt of the head.

The first image is kind of an ode to C3PO from the Phantom Menace showing the wires and such behind the face plating of the droid. This idea didn't last long as the additional layers of epoxy bonded too well to the sculpt, making it impossible to pry the sculpted face plate loose without breaking it. So this sculpt is lost unfortunately...not that I can't sculpt another one if I'd need to later

The remaining images are of the face plate. Adjustments need to be made - squaring off the chin and reducing the jaw a bit. It's a bit too round at this point. The interior place (where the nose and mouth would be) needs a bit more clay added. The back to he head, behind the plate, will contain wires, motors etc - plenty of detail.

The ocular lens detail has softened due to additional sculpting around them so I plant bring those details back before molding the final head sculpt. The helmet will be a separate sculpted piece.

Having fun with this character! Reminds me of the enjoyment when I was sculpting Furlag ❤ More updates to come! Thanks for your continued interest!

#al1l3 #starwars #riseofskywalker #droid #droids #creatureshop #miniature #avesclay #avesfixit #sculpture #customactionfigure #actionfigure #375

1/23 Sculpt update on the droid AL1-L3 "Allie" - Star Wars: the rise of Skywalker - 1:18 scale.

Sculpt using Aves FIXIT Sculpt. A two-part epoxy.

A work in progress sculpt of the head.

The first image is kind of an ode to C3PO from the Phantom Menace showing the wires and such behind the face plating of the droid. This idea didn't last long as the additional layers of epoxy bonded too well to the sculpt, making it impossible to pry the sculpted face plate loose without breaking it. So this sculpt is lost unfortunately...not that I can't sculpt another one if I'd need to later

The remaining images are of the face plate. Adjustments need to be made - squaring off the chin and reducing the jaw a bit. It's a bit too round at this point. The interior place (where the nose and mouth would be) needs a bit more clay added. The back to he head, behind the plate, will contain wires, motors etc - plenty of detail.

The ocular lens detail has softened due to additional sculpting around them so I plant bring those details back before molding the final head sculpt. The helmet will be a separate sculpted piece.

Having fun with this character! Reminds me of the enjoyment when I was sculpting Furlag ❤ More updates to come! Thanks for your continued interest!

#al1l3 #starwars #riseofskywalker #droid #droids #creatureshop #miniature #avesclay #avesfixit #sculpture #customactionfigure #actionfigure #375

2.9 - Sculpt progress of the "Unidentified Greasy Creature" for Star Wars: Skeleton Crew.

1:18 scale. Hand-Sculpted. Aves FIXIT Sculpt - a two part epoxy.

Keep in mind, this is a WORK IN PROGRESS. I take the images with my micro so I can see where adjustments need to be made.

I don't mind if things aren't perfectly symmetric because in the real world, faces aren't symmetric. Imperfection is an art.

What I look for is placement. For example, I need to bring up the nostrils a tad and lower the brow. Shouldn't be a problem but keep in mind, this is cured epoxy so I need to break out the "hammer and chisel" LOL!

Again, hand sculpting is an art and I don't expect my likenesses to be 100% accurate. We all have a perspective when working and that's the beauty of it in my opinion.

It's coming along and I'm very happy with the results so far. Hope to have an update with the adjustments soon.

Thanks for looking!

#sculpting #greasycreature #starwars #skeletoncrew #miniature #art #perspective #headsculpt #likeness #hasbro #custom #customactionfigure #actionfigure #alien #creature #avesclay #avesfixit

2.9 - Sculpt progress of the "Unidentified Greasy Creature" for Star Wars: Skeleton Crew.

1:18 scale. Hand-Sculpted. Aves FIXIT Sculpt - a two part epoxy.

Keep in mind, this is a WORK IN PROGRESS. I take the images with my micro so I can see where adjustments need to be made.

I don't mind if things aren't perfectly symmetric because in the real world, faces aren't symmetric. Imperfection is an art.

What I look for is placement. For example, I need to bring up the nostrils a tad and lower the brow. Shouldn't be a problem but keep in mind, this is cured epoxy so I need to break out the "hammer and chisel" LOL!

Again, hand sculpting is an art and I don't expect my likenesses to be 100% accurate. We all have a perspective when working and that's the beauty of it in my opinion.

It's coming along and I'm very happy with the results so far. Hope to have an update with the adjustments soon.

Thanks for looking!

#sculpting #greasycreature #starwars #skeletoncrew #miniature #art #perspective #headsculpt #likeness #hasbro #custom #customactionfigure #actionfigure #alien #creature #avesclay #avesfixit

2.9 - Sculpt progress of the "Unidentified Greasy Creature" for Star Wars: Skeleton Crew.

1:18 scale. Hand-Sculpted. Aves FIXIT Sculpt - a two part epoxy.

Keep in mind, this is a WORK IN PROGRESS. I take the images with my micro so I can see where adjustments need to be made.

I don't mind if things aren't perfectly symmetric because in the real world, faces aren't symmetric. Imperfection is an art.

What I look for is placement. For example, I need to bring up the nostrils a tad and lower the brow. Shouldn't be a problem but keep in mind, this is cured epoxy so I need to break out the "hammer and chisel" LOL!

Again, hand sculpting is an art and I don't expect my likenesses to be 100% accurate. We all have a perspective when working and that's the beauty of it in my opinion.

It's coming along and I'm very happy with the results so far. Hope to have an update with the adjustments soon.

Thanks for looking!

#sculpting #greasycreature #starwars #skeletoncrew #miniature #art #perspective #headsculpt #likeness #hasbro #custom #customactionfigure #actionfigure #alien #creature #avesclay #avesfixit

2.9 - Sculpt progress of the "Unidentified Greasy Creature" for Star Wars: Skeleton Crew.

1:18 scale. Hand-Sculpted. Aves FIXIT Sculpt - a two part epoxy.

Keep in mind, this is a WORK IN PROGRESS. I take the images with my micro so I can see where adjustments need to be made.

I don't mind if things aren't perfectly symmetric because in the real world, faces aren't symmetric. Imperfection is an art.

What I look for is placement. For example, I need to bring up the nostrils a tad and lower the brow. Shouldn't be a problem but keep in mind, this is cured epoxy so I need to break out the "hammer and chisel" LOL!

Again, hand sculpting is an art and I don't expect my likenesses to be 100% accurate. We all have a perspective when working and that's the beauty of it in my opinion.

It's coming along and I'm very happy with the results so far. Hope to have an update with the adjustments soon.

Thanks for looking!

#sculpting #greasycreature #starwars #skeletoncrew #miniature #art #perspective #headsculpt #likeness #hasbro #custom #customactionfigure #actionfigure #alien #creature #avesclay #avesfixit