The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

Sculpt update on the Egg Morpher or Praetorian Xenomorph - 1:18 scale - Aliens: Defiance, Dark Horse Comics. Completed phase 1 of the head sculpt, next step will be making a mold, then sculpting the variations of the mouth...that's if the mold and castings come out! :) Began building the upper torso of the figure (update coming soon). Used AVes FIXIT to create the sculpt. More to come! #avesfixit #avesstudio #alien #aliens #xenomorph #Praetorian #sculpture #miniature #darkhorsecomics #defiance

Sculpt update on H.R. Giger's Space Jockey - 1:18 scale, ALIEN (1979).

Sculpt using Aves FIXIT Sculpt - a two-part epoxy. Find out more about this material at Aves Clay

In my last update, I spoke of how I needed to strip away a portion of my sculpt to make more room in the back of the Space Jockey for additional detail. I think my last video update showed the area I "dremeled" away.

For this update, I have successfully sculpted the portions that were previously removed, adding more detail than before and this time bringing the sculpt further out, making room for the new detail that has also begun to take residence in the back of the sculpture. Two tubes have been added as well as a build-out between the two where the next set up tubes will go. This offset is accurate to the production photos I have studied from the set.

Next step is to sculpt the backpack behind the head, neck and shoulders. An enormous amount of biomechanical detail in this area alone so it should be fun! Just waiting on my latest FIXIT order from Aves Studio which should be here sometime this week.

Sorry for the absence of updates over the past month. Life turned the volume up a bit and I had to step away from the workbench to turn it back down. Nothing serious, which I'm thankful for. Speaking of being thankful, I hope all my American friends had a great Thanksgiving!

Thanks for all the continued interest! Hoping you all are staying safe and healthy. More updates to come! ❤

#alien #spacejockey #alien79 #sculpture #art #aves #avesfixit #hrgiger #giger #biomechanical #customactionfigure #miniatures #diorama #sculpting

Nostromo Wall Panel/Corridor Portal - ALIEN79 - 1:18 scale. The plan is this....I was able to scale a line drawing of the panel wall I found on the RPF forums. I plan to trace the piped pattern using rolled Aves FIXIT sculpt - one strand at a time. Will take awhile but the outcome will be worth it....especially once molds and casts have been made. ‪#‎nostromo‬ ‪#‎alien‬ ‪#‎corridor‬ ‪#‎avesfixit‬ ‪#‎sculpting

‬

Sculpt update on H.R. Giger's Space Jockey - 1:18 scale, ALIEN (1979).

Sculpt using Aves FIXIT Sculpt - a two-part epoxy. Find out more about this material at Aves Clay

In my last update, I spoke of how I needed to strip away a portion of my sculpt to make more room in the back of the Space Jockey for additional detail. I think my last video update showed the area I "dremeled" away.

For this update, I have successfully sculpted the portions that were previously removed, adding more detail than before and this time bringing the sculpt further out, making room for the new detail that has also begun to take residence in the back of the sculpture. Two tubes have been added as well as a build-out between the two where the next set up tubes will go. This offset is accurate to the production photos I have studied from the set.

Next step is to sculpt the backpack behind the head, neck and shoulders. An enormous amount of biomechanical detail in this area alone so it should be fun! Just waiting on my latest FIXIT order from Aves Studio which should be here sometime this week.

Sorry for the absence of updates over the past month. Life turned the volume up a bit and I had to step away from the workbench to turn it back down. Nothing serious, which I'm thankful for. Speaking of being thankful, I hope all my American friends had a great Thanksgiving!

Thanks for all the continued interest! Hoping you all are staying safe and healthy. More updates to come! ❤

#alien #spacejockey #alien79 #sculpture #art #aves #avesfixit #hrgiger #giger #biomechanical #customactionfigure #miniatures #diorama #sculpting

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

Sculpt update on the NEWBORN - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt by Aves Studio LLC

Sculpted hips and began working the upper arms.

Realized I need to thin out the lower back a bit and complete some detail just behind the shoulders before I can replicate (mold/cast) and head on to the next stage. Loving the elongated arms of this beast....

At this point with the project, I have pretty much caught up to the point where I left off with the Covenant Xenomorph, Neomorph and Defiance Praetorian - arms and legs. So expect a variety of updates, not JUST the Newborn from this point forward.

More updates to come! Perhaps some Star Wars updates soon? Bringing some back to the workbench. #alien #alienresurrection #newborn #ripley8 #studioadi #sculpture #avesfixit #avesstudio studioADI

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

A shot showing more of the sculpted detail of the Newborn's tongue. Will be setting up molds for the completed head variants this week. If I can, I will record the process and release another video in the near future. :)

#alien #alienresurrection #newbornalien #ripley8 #avesfixit #avesstudio #customactionfigure #figuresculpting #miniatures

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

Sculpting week off to a great start! Lambert in flight vest - 1:18 scale, ALIEN 79. For the exception of the belt and some minor details, this sculpt is complete. Sculpted the vest last night using Aves FIXIT sculpt. Variants include Lamber in Nostromo T and Lambert in Nostromo Jacket (as seen near the end of the film). Working on some minor touch-ups to the beast tonight as well as Dallas and Kane upper box sculpts. #alien #lambert #nostromocrew #sith_fire30 #avesfixit

Build update on the Command Console Chair for the MU/TH/UR 6000 chamber - Nostromo - ALIEN 79 - 1:18 scale. I already had some chairs made for other parts of the ship so I just whittled down a copy using a dremel and began sculpting new upholstry to the seat using Aves FIXIT sculpt. Also began building the front section from sheet styrene. A little at a time....more to come. ‪#‎alien‬ ‪#‎MUTHUR6000‬ ‪#‎weylandyutani‬ ‪#‎diorama‬ ‪#‎scratchbuilding‬ ‪#‎avesstudio‬ ‪#‎avesfixit‬

Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.

The Queen

Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.

The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.

I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.

Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.

The Egg Morpher

Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.

Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.

Questions are welcome! Thanks again!

#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts

Sculpt update on the NEWBORN - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt by Aves Studio LLC

Sculpted hips and began working the upper arms.

Realized I need to thin out the lower back a bit and complete some detail just behind the shoulders before I can replicate (mold/cast) and head on to the next stage. Loving the elongated arms of this beast....

At this point with the project, I have pretty much caught up to the point where I left off with the Covenant Xenomorph, Neomorph and Defiance Praetorian - arms and legs. So expect a variety of updates, not JUST the Newborn from this point forward.

More updates to come! Perhaps some Star Wars updates soon? Bringing some back to the workbench. #alien #alienresurrection #newborn #ripley8 #studioadi #sculpture #avesfixit #avesstudio studioADI

Nostromo build update..."Mother" Security Portal - ALIEN 79 - 1:18 scale. "Security Portal" - it's the doorway section with the supposed scan that lights up allowing access to the "Mother's Womb" as Ridley Scott likes to call it. The first section of the corridor that leads to the Nostromo's master computer - a work in progress. I realized it's a tad taller than it should be...not much of a concern. Had to compensate for making the entrance from the bridge a tad too large. Still works smile emoticon

SO MUCH DETAIL into what I thought would be a simple panel wall. The more I studied the photos however, the more I realized just how much attention was given to every corner of these stage designs. Brilliant and insane.

One day soon I will master LEDs and how to wire them appropriately. Knowing that, I decided to create the doorway using clear acrylic as the frame. This is so I can add LED panels to the exterior later and recreate the lighting effect. Currently, the light is emanating from a handheld LED light...but even this offers an awesome effect. Next step is to sculpt the padding to the interior of the doorway, add a control panel then begin to build out into the small security corridor. ‪#‎nostromo‬ ‪#‎alien‬ ‪#‎mother‬ ‪#‎MUTHUR‬ ‪#‎mastercomputer‬ ‪#‎weyland‬ ‪#‎dallas‬ ‪#‎tomskerritt‬

Sculpt progress on the Neomorph - 1:18 scale - Alien: Covenant. Completed the initial head sculpt of the beast - open mouth, attack. The next step will be to mold and cast successfully. At that point, I can take a couple quality casts and mod the sculpt to create the other two variants. Began work on the upper torso of the Neomorph - update coming soon.Sculpted using Aves FIXIT Sculpt from Aves Studio LLC.

This sculpt inspired by the concept/production art by Colin Shulver - www.artstation.com/artwork/bxJYo

More to come!!! :) #alien #aliens #neomorph #xenomorph #covenant #miniature #sculpture #avesfixit #avesstudio

Sculpt progress on the Neomorph - 1:18 scale - Alien: Covenant. Completed the initial head sculpt of the beast - open mouth, attack. The next step will be to mold and cast successfully. At that point, I can take a couple quality casts and mod the sculpt to create the other two variants. Began work on the upper torso of the Neomorph - update coming soon.Sculpted using Aves FIXIT Sculpt from Aves Studio LLC.

This sculpt inspired by the concept/production art by Colin Shulver - www.artstation.com/artwork/bxJYo

More to come!!! :) #alien #aliens #neomorph #xenomorph #covenant #miniature #sculpture #avesfixit #avesstudio

Sculpt update on H.R. Giger's Space Jockey - 1:18 scale, ALIEN (1979).

Sculpt using Aves FIXIT Sculpt - a two-part epoxy. Find out more about this material at Aves Clay

In my last update, I spoke of how I needed to strip away a portion of my sculpt to make more room in the back of the Space Jockey for additional detail. I think my last video update showed the area I "dremeled" away.

For this update, I have successfully sculpted the portions that were previously removed, adding more detail than before and this time bringing the sculpt further out, making room for the new detail that has also begun to take residence in the back of the sculpture. Two tubes have been added as well as a build-out between the two where the next set up tubes will go. This offset is accurate to the production photos I have studied from the set.

Next step is to sculpt the backpack behind the head, neck and shoulders. An enormous amount of biomechanical detail in this area alone so it should be fun! Just waiting on my latest FIXIT order from Aves Studio which should be here sometime this week.

Sorry for the absence of updates over the past month. Life turned the volume up a bit and I had to step away from the workbench to turn it back down. Nothing serious, which I'm thankful for. Speaking of being thankful, I hope all my American friends had a great Thanksgiving!

Thanks for all the continued interest! Hoping you all are staying safe and healthy. More updates to come! ❤

#alien #spacejockey #alien79 #sculpture #art #aves #avesfixit #hrgiger #giger #biomechanical #customactionfigure #miniatures #diorama #sculpting

Sculpt update on the Egg Morpher or Praetorian Xenomorph - 1:18 scale - Aliens: Defiance, Dark Horse Comics. Completed phase 1 of the head sculpt, next step will be making a mold, then sculpting the variations of the mouth...that's if the mold and castings come out! :) Began building the upper torso of the figure (update coming soon). Used AVes FIXIT to create the sculpt. More to come! #avesfixit #avesstudio #alien #aliens #xenomorph #Praetorian #sculpture #miniature #darkhorsecomics #defiance

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

Sculpt progress on the Praetorian Alien (Egg Morpher) from the Dark Horse comic series Aliens: Defiance. 1:18 scale.

Completed the sculpt work on the upper and lower arms. I am using Aves FIXIT sculpt as my sculpt material, a two-part epoxy.

The arms are elongated per the design and description by the original artist. Other than the head, the body of the Praetorian borrows much of the original Giger design of the beast for the 79 film, but with minior changes to the arms and legs. The next step in the build will be the hands and upper legs.

I'm right in the middle of this and two other projects I'm trying to get some progress on including the Alien Newborn (Resurrection) and the Alien Queen (Aliens). I may though begin a couple xeno sculpts that are concept driven...artists concepts never brought to film or publication. I have a couple ideas so far. Hope to have something to show soon.

#alien #aliensdefiance #alienresurrection #aliennewborn #praetorian #darkhorsecomics #eggmorpher #hive #sculpting #sculpture #avesstudio #avesfixit #art #sithfire30 #dayton #allen #giger

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.

The Queen

Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.

The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.

I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.

Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.

The Egg Morpher

Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.

Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.

Questions are welcome! Thanks again!

#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts

Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.

The Queen

Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.

The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.

I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.

Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.

The Egg Morpher

Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.

Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.

Questions are welcome! Thanks again!

#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts

Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.

The Queen

Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.

The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.

I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.

Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.

The Egg Morpher

Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.

Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.

Questions are welcome! Thanks again!

#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts

Sculpting week off to a great start! Lambert in flight vest - 1:18 scale, ALIEN 79. For the exception of the belt and some minor details, this sculpt is complete. Sculpted the vest last night using Aves FIXIT sculpt. Variants include Lamber in Nostromo T and Lambert in Nostromo Jacket (as seen near the end of the film). Working on some minor touch-ups to the beast tonight as well as Dallas and Kane upper box sculpts. #alien #lambert #nostromocrew #sith_fire30 #avesfixit

Sculpt progress on the Neomorph - 1:18 scale - Alien: Covenant. Completed the initial head sculpt of the beast - open mouth, attack. The next step will be to mold and cast successfully. At that point, I can take a couple quality casts and mod the sculpt to create the other two variants. Began work on the upper torso of the Neomorph - update coming soon.Sculpted using Aves FIXIT Sculpt from Aves Studio LLC.

This sculpt inspired by the concept/production art by Colin Shulver - www.artstation.com/artwork/bxJYo

More to come!!! :) #alien #aliens #neomorph #xenomorph #covenant #miniature #sculpture #avesfixit #avesstudio

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

Sculpt progress on the Praetorian Alien (Egg Morpher) from the Dark Horse comic series Aliens: Defiance. 1:18 scale.

Completed the sculpt work on the upper and lower arms. I am using Aves FIXIT sculpt as my sculpt material, a two-part epoxy.

The arms are elongated per the design and description by the original artist. Other than the head, the body of the Praetorian borrows much of the original Giger design of the beast for the 79 film, but with minior changes to the arms and legs. The next step in the build will be the hands and upper legs.

I'm right in the middle of this and two other projects I'm trying to get some progress on including the Alien Newborn (Resurrection) and the Alien Queen (Aliens). I may though begin a couple xeno sculpts that are concept driven...artists concepts never brought to film or publication. I have a couple ideas so far. Hope to have something to show soon.

#alien #aliensdefiance #alienresurrection #aliennewborn #praetorian #darkhorsecomics #eggmorpher #hive #sculpting #sculpture #avesstudio #avesfixit #art #sithfire30 #dayton #allen #giger

A shot showing the "before and after" of the Ash Jumpsuit sculpt - ALIEN 79 - 1:18 scale. The "naked" frame to the left and the completed sculpt (with ALT head sculpt) to the right. 17 points of articulation...some better than others. Sculpted using Aves FIXIT. Of all the figures I have created for the ALIEN 79 series, Ash is the one I have invested the most time with - so many variants. Kane is a close second. Will eventually get into painting bodies of the figures - for now I'm working on finishing head sculpts. #alien #ash #robot #weylandyutani #buildingbetterworlds #covenant #nostromo #scienceofficer #avesstudio #avesfixit #sculpting

Sculpt progress on the Praetorian Alien (Egg Morpher) from the Dark Horse comic series Aliens: Defiance. 1:18 scale.

Completed the sculpt work on the upper and lower arms. I am using Aves FIXIT sculpt as my sculpt material, a two-part epoxy.

The arms are elongated per the design and description by the original artist. Other than the head, the body of the Praetorian borrows much of the original Giger design of the beast for the 79 film, but with minior changes to the arms and legs. The next step in the build will be the hands and upper legs.

I'm right in the middle of this and two other projects I'm trying to get some progress on including the Alien Newborn (Resurrection) and the Alien Queen (Aliens). I may though begin a couple xeno sculpts that are concept driven...artists concepts never brought to film or publication. I have a couple ideas so far. Hope to have something to show soon.

#alien #aliensdefiance #alienresurrection #aliennewborn #praetorian #darkhorsecomics #eggmorpher #hive #sculpting #sculpture #avesstudio #avesfixit #art #sithfire30 #dayton #allen #giger

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

Figure sculpt update for 3/18/22 -

Migraines took me out periodically over the the past couple weeks...those of you that suffer them know what I'm talking about. Unfortunate reason for the delay but feeling much better now

Update of Jedi Dass Jennir from the Dark Horse Comics series Dark Times (Out of the Wilderness arc). I finished sculpting the hair, arms, chest and back. Next comes the details to the belt and his holster. I have to sculpt it in such a way where articulation won't be hindered when positioning him on his steed. I'd rather the figure not be built on a parts swapping gimmick but worse case scenario, I sculpt a second lower body of his legs in a static sitting position and forget about it. It's more work but it's a personal project so why not? We'll see.

Next up is progress made on the bounty hunter Falco Sang from the same series. I finished sculpting his upper body along with detailing to the front and back of his chest harness/gun holster. The actual holsters themselves are being sculpted separately and will be attached in such a way as not to impede on the arm articulation. I have a couple ideas on how to accomplish that. Also working on custom weapons seen in the comic using some Marauder GR weapons I purchased a few years back along with some various Star Wars themed weapondry.

Finally sculpt progress made on the Bounty Hunter of Ord Mantell, Skorr. This character comes from the classic Marvel comics strip of the same title. Body sculpt build is complete, and I’ve started sculpting the boots which will be shown in a future update. Starting from the bottom, up and will add some additional articulation as I go forward. The frame was originally a Boss Fight Studio Spartan and has worked very well for this build so far.

That’s it for now! As of this update, I was able to get some additional sculpt work completed so I’m shooting those updates now and will have that up soon. Just didn’t want too much time to go by without an update.

Hope you enjoy and thanks again for your continued interest and support for my work. ❤

#starwars #darkhorsecomics #dassjennir #jedi #falcosang #marvel #classicstarwars #skorr #bountyhunterofordmantell #bountyhunter #sculpting #art #customs #customactionfigure #hobby #epoxy #avesfixit #avessculpt #miniature

Nostromo Wall Panel/Corridor Portal - ALIEN79 - 1:18 scale. The plan is this....I was able to scale a line drawing of the panel wall I found on the RPF forums. I plan to trace the piped pattern using rolled Aves FIXIT sculpt - one strand at a time. Will take awhile but the outcome will be worth it....especially once molds and casts have been made. ‪#‎nostromo‬ ‪#‎alien‬ ‪#‎corridor‬ ‪#‎avesfixit‬ ‪#‎sculpting

‬

Sculpt progress on the Newborn - Alien: Resurrection - 1:18 scale. Sculpt using Aves FIXIT Sculpt from Aves Studio LLC.

Looks kind like a bust doesn't it...not a bad idea. Still, it's only the buildup of the upper torso. I will be sculpting detail once a needled it down a bit more. Then will come the lower abdomen, arms. legs etc.

The upper torso and head will be one piece. Just don't have the tech available to create an articulated neck that works with this sculpt. If anything it would have been a rubber sheath that would drape over and articulated frame.

Different expressions are also in the works. Sculpting tails for the other xenos at this time and a tongue for this beast.

More to come!!! #alien #alienresurrection #newborn #ripley8 #clone #sculpture #miniature #avesfixitsculpt #avesstudio

Still can't believe I've taken on this project and am thrilled at the progress so far smile emoticon - The problem, I'm running out of FIXIT!!! Gonna have to place a reorder soon! ‪#‎spacejockey‬ ‪#‎alien‬ ‪#‎sculpture‬ ‪#‎hrgiger‬ ‪#‎avesstudio‬ ‪#‎avesfixit‬

Nostromo build update..."Mother" Security Portal - ALIEN 79 - 1:18 scale. "Security Portal" - it's the doorway section with the supposed scan that lights up allowing access to the "Mother's Womb" as Ridley Scott likes to call it. The first section of the corridor that leads to the Nostromo's master computer - a work in progress. I realized it's a tad taller than it should be...not much of a concern. Had to compensate for making the entrance from the bridge a tad too large. Still works smile emoticon

SO MUCH DETAIL into what I thought would be a simple panel wall. The more I studied the photos however, the more I realized just how much attention was given to every corner of these stage designs. Brilliant and insane.

One day soon I will master LEDs and how to wire them appropriately. Knowing that, I decided to create the doorway using clear acrylic as the frame. This is so I can add LED panels to the exterior later and recreate the lighting effect. Currently, the light is emanating from a handheld LED light...but even this offers an awesome effect. Next step is to sculpt the padding to the interior of the doorway, add a control panel then begin to build out into the small security corridor. ‪#‎nostromo‬ ‪#‎alien‬ ‪#‎mother‬ ‪#‎MUTHUR‬ ‪#‎mastercomputer‬ ‪#‎weyland‬ ‪#‎dallas‬ ‪#‎tomskerritt‬

The first of two semi-static posed figures of the creature from the 1979 film, Alien. Hand sculpted, hand painted. This version depicts the beast as it would have appeared in several promotional test shots during pre-production, the air duct scene where Captain Dallas met his end as well as a deleted scene appearing within the corridor while Parker and Lambert were making their desperate escape.

Figure is approx. 3" high from highest point on head to the feet. Articulated neck, shoulders, elbows, wrists. Vacuum formed PETG dome is removable.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #inspacenoonecanhearyouscream

Sculpt update on The Queen - Aliens (86) - and the Egg Morpher - Aliens: Defiance - Dark Horse Comics. Both 1:18 scale.

The Queen

Completed the rough sculpt of the lower mandible and teeth. The lower mandible is a skeletal sculpt for the moment while I adjust and refine the teeth. After the lower teeth are complete, flesh detail will be added to the mandible.

The teeth are being sculpted on a separate pallet, so when completed can have a mold made and cast in clear resin. The teeth are individually sculpted using Aves FIXIT sculpt, a two-part epoxy from Aves Studio LLC. Once cured, I've begun refining each using dental tools and fine-grit sandpaper. Hope to have them at a full shine similar to the top set of teeth soon.

I still have to sculpt the gum line for the lower teeth and the pallet will eventually be set deeper into the lower mandible than what you see here. Many adjustments will be made after castings are made. Then additional casts will be made.

Do the top and bottom teeth line up? Close but not really - not too concerned with that since my sculpt will feature multiple head sculpts and not a jointed jaw. So perfect alignment isn't a priority here...although I will do my best to get it as close as possible before making molds.

The Egg Morpher

Began filling the detail to the back "pipes" of the beast. I've also begun the sculpt of the creature's hands which will be very similar to the Giger Alien hands but larger. The rough sculpt right now resemble Bugs Bunny gloves and not that of the nightmarish xenomorph but no worries, that will all change....just how I work.

Hope you enjoyed the updates!!! Trying to get an update knocked out each week. If not, every other week for sure with updates in between.

Questions are welcome! Thanks again!

#alien #aliens #queen #hive #alienhive #eggmorpher #nostromo #sulaco #lv426 #aves #avesstudio #avesfixit #fox #stanwinston #studioadi #art #sculpting #customactionfigure studioADI Stan Winston Stan Winston School of Character Arts

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

Surgery went very well - Sculpt update on The Space Jockey - 1:18 scale - ALIEN. Spoke earlier about receiving new resource images that provided more detail on the creatures skull - particularly it's lower jaw. Come to find out the jaw is split....and unfortunately mine was not. I say "was" because last night I broke out the dremel and some smaller sculpting tools, carefully worked out the existing, now fully cured jaw and replaced is with a sculpted split version. May be difficult to see in these images since they were taken with my smartphone but I'm happy it's more film accurate now. Even thought the sculpt as a whole will not look exactly as the Giger set piece (trying to get it close), items like the jaw need to be accurate and was worth the risk to fix it smile emoticon ‪#‎alien‬ ‪#‎spacejockey‬ ‪#‎nostromo‬ ‪#‎derelict‬ ‪#‎giger‬ ‪#‎sculpture‬ ‪#‎biomechanical‬ ‪#‎diorama‬ ‪#‎avesfixit‬

Sculpt progress on the Neomorph - 1:18 scale - Alien: Covenant. Completed the initial head sculpt of the beast - open mouth, attack. The next step will be to mold and cast successfully. At that point, I can take a couple quality casts and mod the sculpt to create the other two variants. Began work on the upper torso of the Neomorph - update coming soon.Sculpted using Aves FIXIT Sculpt from Aves Studio LLC.

This sculpt inspired by the concept/production art by Colin Shulver - www.artstation.com/artwork/bxJYo

More to come!!! :) #alien #aliens #neomorph #xenomorph #covenant #miniature #sculpture #avesfixit #avesstudio

Nostromo build update..."Mother" Security Portal - ALIEN 79 - 1:18 scale. "Security Portal" - it's the doorway section with the supposed scan that lights up allowing access to the "Mother's Womb" as Ridley Scott likes to call it. The first section of the corridor that leads to the Nostromo's master computer - a work in progress. I realized it's a tad taller than it should be...not much of a concern. Had to compensate for making the entrance from the bridge a tad too large. Still works smile emoticon

SO MUCH DETAIL into what I thought would be a simple panel wall. The more I studied the photos however, the more I realized just how much attention was given to every corner of these stage designs. Brilliant and insane.

One day soon I will master LEDs and how to wire them appropriately. Knowing that, I decided to create the doorway using clear acrylic as the frame. This is so I can add LED panels to the exterior later and recreate the lighting effect. Currently, the light is emanating from a handheld LED light...but even this offers an awesome effect. Next step is to sculpt the padding to the interior of the doorway, add a control panel then begin to build out into the small security corridor. ‪#‎nostromo‬ ‪#‎alien‬ ‪#‎mother‬ ‪#‎MUTHUR‬ ‪#‎mastercomputer‬ ‪#‎weyland‬ ‪#‎dallas‬ ‪#‎tomskerritt‬

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream

The second of two semi-static posed figures is complete. This version depicts the creature as it appears in the deleted "crab-walker" scene from the 1979 film as Lambert and Parker make a desperate attempt to escape the Nostromo. This deleted scene however was thought comical by many, not well executed on film and revealed too much of the creature...reducing it to nothing more than a man in a rubber suit...something Ridley Scott was avoiding by using smoke and shadow.

Hand sculpted, hand painted. 1:18 scale. I borrowed resin cast parts from the original Alien figure I created a year earlier, made modifications to the torso, neck, shoulders

and legs.

When crouched or "crab walking", the figure is approx. 3" high from highest point on head to the feet. When standing, the figure is approx. 5.25" high, still not fully erect as the leg and hip joints limit the full motion (again, this was originally meant to be a static posed figure). Fortunately I was able to add several articulation points to the figure: Ball jointed neck, shoulders, elbows, wrists, hips, knees and ankles. Vacuum formed PETG dome is removable. The tail is static but is attached using a revoltech joint and can be switched out with a longer tail option.

Original was sculpted using Aves FIXIT sculpt, a two part epoxy. Parts were cast in resin and assembled to build this version. Used Model Masters Polly Scale and Tamiya acrylics.

#ALIEN #nostromo #alien79project #avesfixit #avesstudio #20thcenturyfox #hrgiger #miniature #sculpting #art #painting #monsters #deletedscene #crabwalker #lambertandparker #inspacenoonecanhearyouscream