View allAll Photos Tagged Sandwich_Panel
Öl auf Wabenkernplatte, Oberfläche strukturiert / Oil on honeycomb core surface-structured sandwich panel. The Essl Collection. Ausstellung "Arnulf Rainer. Eine Hommage". Albertina, Wien
017 Solar cold room storage with solar panel and sandwich panel:
Our innovation, FOCUSUN 20ft and 40ft solar container cold room is a “plug and play” modular, solar-powered walk-in cold room, for 24/7 off-grid storage and preservation of perishable foods. It adequately addresses the problem of post- harvest losses in fruits, vegetables and other perishable food.
The solar powered walk-in cold room is made of 120mm insulating cold room panels to retain cold. Energy from solar panels mounted on the roof-top of the cold room are stored in high capacity batteries, these batteries feeds an inverter which in turn feeds the refrigerating unit.
Product Name
Solar-powered container cold room in 20ft or 40ft
Material stainless steel
Color Whilte & Blue
Capacity 1T to 20T
Panel Prefabricated Panel
Interior temperature -25℃ to 5℃
Applicarion area Sea food/fish/meat/fresh fruits/vegetables
Core material of panel Polyurethane
Compressor Copleand
Core density 40~42kg/m3
Condition It can use everywhere where is enough sun
Panel thickness 100mm, 120mm, 150mm
Control system Full automatic control, easy to operation and management
Material of panels surface Stainless steel
Refrigerant R404a environment friendly refrigerant
017 Solar cold room storage with solar panel and sandwich panel:
Our innovation, FOCUSUN 20ft and 40ft solar container cold room is a “plug and play” modular, solar-powered walk-in cold room, for 24/7 off-grid storage and preservation of perishable foods. It adequately addresses the problem of post- harvest losses in fruits, vegetables and other perishable food.
The solar powered walk-in cold room is made of 120mm insulating cold room panels to retain cold. Energy from solar panels mounted on the roof-top of the cold room are stored in high capacity batteries, these batteries feeds an inverter which in turn feeds the refrigerating unit.
Product Name
Solar-powered container cold room in 20ft or 40ft
Material stainless steel
Color Whilte & Blue
Capacity 1T to 20T
Panel Prefabricated Panel
Interior temperature -25℃ to 5℃
Applicarion area Sea food/fish/meat/fresh fruits/vegetables
Core material of panel Polyurethane
Compressor Copleand
Core density 40~42kg/m3
Condition It can use everywhere where is enough sun
Panel thickness 100mm, 120mm, 150mm
Control system Full automatic control, easy to operation and management
Material of panels surface Stainless steel
Refrigerant R404a environment friendly refrigerant
A&S airack®…
The New Green-Light Of Rack Mounted Cases A&S airack® has the smallest carbon footprint of any rack case. A&S airack® utilizes 98% reusable and recyclable materials. We have completely replaced foam with A&S Shock Mounts™ in a revolutionary approach that utilizes rubber isolators that improve cooling, air flow and extends the life span of your electronic gear, eliminating decomposing foam around racked equipment.
* Available in A&S®, Kriz-Kraft™, and FlyWeight® racks
A&S Kriz-Kraft™…
The Strongest Rack Case In The Industry!
The Kriz-Kraft design is, undoubtedly, the strongest rack case in the industry. This strength comes primarily from the contiguous box construction providing the highest structural integrity achievable. The doors are precision-cut in the front and rear panels and fitted with a proprietary door jam and U-channel to provide a meticulous fit. Additionally, this design encapsulates
the foam that provides shock-absorbent characteristics in a manner that dramatically reduces its degradation over time by environmental and human causes. While the Kriz-Kraft case is stronger than the traditional rack case made of 1/2 inch ACX fir plywood is more maneuverable, and quicker to set up and take down at a jobsite or gig.
A&S FlyWeight®
Cases made out of A&S FlyWeight® are up to 60% lighter than our traditional ATA cases, but even stronger, and within the first few trips they pay for themselves. A&S FlyWeight® is a sandwich panel made of aluminum, Nomex® or Kevlar® honeycomb with protective layers of unidirectional fiberglass on both sides.
Öl auf Wabenkernplatte, Oberfläche strukturiert / Oil on honeycomb core surface-structured sandwich panel. The Essl Collection. Ausstellung "Arnulf Rainer. Eine Hommage". Albertina, Wien
www.jinggongmachine.com/products/sandwich-panel-line/
Sandwich panel lines are widely applied in the protection and decoration of outside wall for tall building and first-class office building. Sandwich panel production machinery can protect, keep warm and flame retarding. The sandwich panel production line in Jinggong can mainly produce roof panels and wall panels.
Here is the manufacturing process of sandwich panel production line:
Decoiler transverse location---Lifting stage move outside---coil hoisting—lifting stage move inside (To outside position)---Lifting stage rise (Coil center arrive at the decoiler axle center)----Lifting stage car move (To inside position)---Decoiler axle expanding (---Pressing-arm press tightly)----Lifting stage reset position---decoiler uncoiling material
Jinggong is one of the top sandwich panel machine manufacturers in China, contact us and get sandwich panel production line price!
Jinggong Sandwich Panel Line/Machine for Sale
PU/PIR Continuous Sandwich Panel Production Line
The product of PU/PIR Continuous Sandwich Panel Machine is a new type building material, which has the function such as good flame retarding, keep warm, heat insulation, sound insulation, waterproof, handiness, environmental protection and so on. Learn More >
Rockwool Continuous Sandwich Panel Production Line
The laminating system of Rockwool sandwich panel machine consists of feeding, glue, heating, laminating and post-cutting. The whole machine is under the control of PLC. The line can produce single corrugated sheet, and can also produce the sandwich panel with rabbet joint and corrugated sandwich panel. Learn More >
EPS Sandwich Panel Production Line
EPS Sandwich Panel Production Line is a integrated production line consisting of a roll forming machine and a sandwich panel laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine consists of decoiler, main body and post-cut equipment. Learn More >
Sandwich Panel Line-FAQs
What's the main part of the sandwich panel machine line?
PU sandwich panel line and Rock Wool sandwich panel line consists of Decoiler, Film & Cutting System, Roll Forming System, Heating System, Rock Wool System (Rock wool line) High-Pressure Foaming System (PU line), Double Belt System, Band Saw Cutting System, Cooling System (PU line), Packing System.
EPS sandwich panel line consists of Feeding System, Roll Forming System, EPS guiding and feeding system, Heating system, Laminator, Glue Providing System, EPS Slotting Device, and Cutting System.
What's the raw material of the sandwich panel line?
Sandwich panel making machine raw material includes: Pre-painted steel sheet, galvanized steel sheet, Aluminum sheet, thickness: 0.4-0.8mm; width: maximum 1250mm.
EPS core material: density is≥18kg/m3, unstraight of each side ≤1mm/m, curve ≤3mm/m, surface be even, unevenness smaller than 1.5mm/m, EPS material single piece length more than 3m.
What's the function of PU sandwich panel line, rock wool sandwich panel line and EPS sandwich panel line?
PU/Rock Wool sandwich panel line: This sandwich panel equipment can produce the sandwich panel which is the new type of building material. Its products have the best function of heat preservation, heat insulation, sound insulation, fire retardant, water proof, environmental protection, etc.
EPS sandwich panel line: Through this sandwich panel line, corrugated sandwich panels can be produced directly, without the shortcoming that the traditional corrugated sandwich panel has to be laminated manually after the forming of a corrugated sheet. Moreover, both the roll forming machine and the laminating system can work independently.
What's the working speed of the sandwich panel production line?
PU line/Rock Wool sandwich panel line: 3-8m/min
EPS sandwich panel line: 1-6m/min
How long is the installation and commissioning period for the sandwich panel production line?
EPS sandwich panel line: 20-30 days; PU line/Rock Wool sandwich panel line: 45-60 days (According to different configurations). The customer needs to prepare the foundation and tools in advance.
Experimental House, Almere, NL - Jan Benthem Architect -
The house was designed for an ‘unusual homes’ competition held by De Fantasie in Almere. The brief was to design a house without taking into account current building regulations. All prize-winners were awarded a plot of land on loan for five years. This meant that the house and its foundations had to be easy to dismantle. In the compact house, the living room is bounded on three sides by glass sheets to gather the surrounding landscape into the house. Sandwich panel walls enclose the private zone comprising the two bedrooms, kitchen and bathroom. The extraordinary construction of the house combats wind pressure in three ways. The space-frame floor structure is attached to a foundation of concrete slabs, stabilizing fins are placed strategically at the seams of the toughened glass sheets and finally two steel tension cables secure the lightweight profiled steel roof borne aloft by the glazing.
Client
Family J. Benthem
Architect
Benthem Crouwel Architects
Gross floor area
65 m²
Start design
1982
Start construction
1982
Completion
1984
#soguk #hava #deposu www.sonkarsogutma.com.tr #split #sogutma #soğutma #endüstriyel #endustriyel #industrial #cooling #groups #split #cooler #group #coldrooms #cold #room #storehouse #warehouse #sandwich #panel #panels #sandwichpanels "COOLING IS OUR WORK"...
The Kamov Ka-25 (NATO reporting name 'Hormone') was a naval helicopter, developed for the Soviet Navy in the USSR from 1958.
In the late 1950s there was an urgent demand for anti-submarine helicopters for deployment on new ships equipped with helicopter platforms entering service with the Soviet Navy. Kamov's compact design was chosen for production in 1958. To speed the development of the new anti-submarine helicopter Kamov designed and built a prototype to prove the cabin and dynamic components layout; designated Ka-20, this demonstrator was not equipped with mission equipment, corrosion protection or shipboard operational equipment. The Ka-20 was displayed at the 1961 Tushino Aviation Day display.
Definitive prototypes of the Ka-25 incorporated mission equipment and corrosion protection for the structure. The rotor system introduced aluminium alloy blades pressurised with nitrogen for crack detection, lubricated hinges, hydraulic powered controls, alcohol de-icing and automatic blade folding. Power was supplied by two free-turbine engines sat atop the cabin, with electrically de-iced inlets, plain lateral exhausts with no Infra-Red countermeasures, driving the main gearbox directly and a cooling fan for the gearbox and hydraulic oil coolers aft of the main gearbox. Construction was of stressed skin duralumin throughout with flush-riveting, as well as some bonding and honeycomb sandwich panels. The 1.5m × 1,25m × 3.94m cabin had a sliding door to port flight deck forward of the cabin and fuel tanks underfloor filled using a pressure refueling nozzle on the port side. A short boom at the rear of the cabin had a central fin and twin toed in fins at the ends of the tailplane mainly for use during auto-rotation. The undercarriage consisted of two noncastoring mainwheels with sprag brakes attached to the fuselage by parallel 'V' struts with a single angled shock absorber to dissipate landing loads, and two castoring nosewheels on straight shock absorbing legs attached directly to the fuselage either side of the cockpit which folded rearwards to reduce interference with the RADAR, all wheels were fitted with emergency rapid inflation flotation collars. Flying controls all act on the co-axial rotors with pitch, roll and collective similar to a conventional single rotor helicopter. Yaw was through differential collective which has a secondary effect of torque, an automatic mixer box ensured that total lift on the rotors remained constant during yaw maneuvers, to improve handling during deck landings. Optional extras included fold up seats for 12 passengers, rescue hoist, external auxiliary fuel tanks or containers for cameras, flares, smoke floats or beacons.
(Text Wikipedia)
www.jinggongmachine.com/products/rockwool-continuous-sand...
The rockwool sandwich panel production line is one continuous and automatic line that integrates mechanism, electrical controlling, hydraulic system and polyurethane chemical reaction technology. The rock wool sandwich panel production machinery adopts advanced international roll forming technology, digital servo technology, frequency conversion vector technology and hydraulic controlling technology, automatic stacking technology.
The advantages of this rock wool sandwich panel machine are the following:
1) High automatization. The whole rockwool production line adopts one full computer integration controlling system of digital servo technology, frequency conversion vector technology and hydraulic controlling technology, which realizes whole connection, collecting control and collecting management. Adopt the cutting style of cut to length without machine stop, so that realize full automatically.
2) High efficiency. The production speed of rockwool sandwich panel machine is 3～8m/min（adjustable according to product forming requirement). The annual product capacity of this line can reach to 800000 M2 (count on the base of 250work days per year and 10 work hours per day)
3) Easy operation. Adopt collecting controlling system, using man-machine conversation. After preparing for the raw material and finishing other production requirements, input required parameters, then the machine can make the product automatically.
4) Low production cost. Developing the machine's automatization, the whole line only needs 5-8 operators to operate the machine fully, which saves much labor cost and production management cost for enterprises.
Video of Mineral/Rock wool Continuous Sandwich Panel Production Line
Zhejiang Jinggong Science and Technology Co., LTD., independently research, develop, and manufacture the PU/Rockwool sandwich panel continuous production line, which reaches the world's advanced technology, fills the blank of domestic PU/Rockwool production line manufacturing. It marks the coming of the era of localization of the PU/rock wool sandwich panel continuous production line. The PU/rock wool sandwich panel continuous production line manufactured by Zhejiang Jinggong Science and Technology Co., LTD. consists of the coiler system, filming, cutting, and slitting device, roll forming system, pre-heating device, rockwool system, rockwool upper and lower adhesive spraying system, pu side seal foaming machine, double belt system, double belt heating system, bandsaw system, stacker system, packing system, etc. It truly realized all the automatic integration production functions from pre-painted steel sheet decoiling to product's packaging. The maximum speed of this production line reaches 8 meters per minute, annual production of PU panel 1 million square meters.The whole production line is exported to Jordan, Kuwait, Tonicia, Russia, Brazil, Argentina, UAE, India, and other countries. The performance of the production line got unanimous approval and favorable comments from the customers. With the development of the construction industry, PU side seal rock wool sandwich panel will be more widely used in construction field. Jinggong Science and Technology will provide the best products and top quality service to the general customers by using most sophisticated manufacturing and technology, also make our own contribution for national and even global environmental protection, energy conservation.
Main Parameters of Rockwool Continuous Sandwich Panel Production Line
Sandwich panel specification:
Length: Min cutting length is 2.5 m
Max cutting length is 12m
Width: (see profile drawing)
Thickness: (see profile drawing)
Raw material specification:
coil thickness: 0.4～0.6 mm (steel be flat without ups and downs, deformation and bending)
sheet yield stress: ≤235MPa
coil max width: 1250 mm (tolerance±2mm)
coil max weight: 5T
coil ID: Φ500 and Φ600 mm
coil OD: Φ1000 mm
Rock wool material: fiber length is >100mm, and the fiber should be arranged vertically, volume density is ≥70kg/m3, one-piece length is ≥3m.
EPS material: volume density is ≥18kg/m3, each edge nonstraightness is ≤1mm/m, radian is ≤3mm/m, the panel surface should be flat, roughness is ＜1.5mm/m, EPS panel one-piece length is ≥3m.
EPS material width: min width is 1/2mm of the sandwich panel width.
Machine rockwool specification:
Work line speed: 4000m/min (adjustable)
Machine length: about 70 m
Working height: 1050 mm（panel output height）
Laminating effective length: 7.5m
Control way: adopt industrial computer PLC
Total power: about 45 kw
Power: 380V/3phase/50 Hz
control voltage: 24 V/110 V/220 V
pneumatic: 0.7 Mpa (self-prepared by the factory)
best working temperature: around 25℃
Component List of Rock Wool Sandwich Panel Production Line
No.ComponentQtyRemarks
15T passive decoiler (upper forming system)1setLoading capacity is ≤5t
2Upper roll forming machine1setWith slitting and waste edge winder
Lower roll forming machine1set
Connecting roller of upper & lower forming systemEach 1set
Platform, stair and rail of upper roll forming machine1set
3Rock wool transfer device1set
Rock wool edge cutting device1set
Dust collector1set
4Rock wool clamp deviceEach 1 set
5Laminator host1setEffective length 7.5m
6Saw cutting system1setUpper & lower saw
7Support frame3sets
8Electric control system1set
The new European IT headquarters for global electrical wholesaler City Electrical Factors (CEF) is described as a visual celebration of the company's ethos and rich industrial heritage, thanks in part to an electrifying aluminium façade featuring Proteus HR rainscreen cladding.
Winner of the North East RIBA Regional Award 2019 and two British Council for Offices’ (BCO) regional awards, the contemporary workplace is split into two areas each with unique spatial qualities to support the requirements of the different departments across the company.
The southern ‘L’ shaped block, which houses the ‘graphics and marketing’ teams, features a striking façade executed in Proteus HR Euromax AluNatur Elox Anodised Brushed pre-coated aluminium, for which FaulknerBrowns took inspiration from the foil shield of a coaxial cable.
Proteus HR is a lightweight, strong and versatile cladding panel that provides aesthetic screening to building facades. The integrated modular rainscreen system features an aluminium honeycomb core, structurally bonded between two thin gauges of lightweight metal skin to create an optically flat panel that is available in aluminium, steel, zinc, stainless steel, copper alloys and other materials.
The Proteus HR honeycomb sandwich panel was fabricated for Janet Nash House using Euromax AluNatur outer skins with an Elox Anodised Brushed pre-coated finish to recreate the coaxial pattern. The designers specified Proteus HR Euromax AluNatur because it offered a value engineered method of recreating the granular appearance of stainless steel but still within the client’s budget expectations.
Euromax AluNatur material consist of semi-transparent clear-coats applied on brushed or transparent lacquering aluminium surface, highlighting the natural character of aluminium substrate material. Pre-coat finishes minimise shade variation between panels and Proteus worked with the project specifiers and installers to ensure consistency of grain direction of the panels at Janet Nash House to guarantee high aesthetic detailing.
Supplier29888941HK supplier products of : PU-core sandwich panel ; Mineral-wool core sandwich panel ; PU foams panel ; CW color & tile metal press panel ; Purlin of model Z ; Purlin of model C ; GC steel bearing board …
Description : The main feature of the products is sound-absorbing , fire-resistance , heat-resistance , It is widely used for decorate outdoor buildings , it can last for a long time-can count a decade or more. We usually use them for godown , warehouse , house in village…