View allAll Photos Tagged Payloader
Very nice ca. 1970/71 overhead view of a Phase-B McDonnell Douglas Astronautics Company (MDAC) shuttle in orbit.
Damned if I could find any matches for this design. No central vertical stabilizer, instead with “them” at the wingtips. Are they still referred to as vertical stabilizers out there? Are they instead winglets? Or are they too big to be referred to as winglets? And because of this appearance, it has a “baseline” NASA-designed orbiter look to it, from ca. 1969…I think. Being a MDAC 'consortium' entry, it also looks like a Spacemaster derivative/evolution. Further confusion (for me) was what appears to be a single main engine, which was never the case for any orbiter design, ever…to my knowledge. Despite the perspective, the second one should’ve still been at least marginally visible/depicted IMHO.
Finally, note the dual/double-decker/two-for-one communications(?) satellite deployment configuration, them being attached to a…what…space tug/Orbital Transfer Vehicle? If so, it should be reusable, right. Is it? And look how wide it is, with the way the propellant(?) tanks are mounted to the “bus”. Does this sort of confirm this hangs out in orbit, waiting to be employed, as is apparently the case here. Can the tanks be jettisoned, in order to be positioned/stowed in the payload bay, say for repairs or refurbishment. I doubt it would be secured transversely, with all tanks still attached.
And then there’s the payload still in the payload bay, with what appear to be the same type/size of tanks, but, mounted to the end of its bus, instead of ringing it, as in the deployed stack.
Further fuel for the murky, amorphous, dynamic, and confusing (to me) Phase-A —> Phase-B shuttle thing.
Oh yeah, one more…check out the 1950’s ray-gun looking gizmo deployed at the back corner of the payload bay. Rendezvous radar? Communications antenna?
A similar double satellite deployment scenario is linked to below.
Jan. 23, 2013 Technicians encapsulate the NASA's Landsat Data Continuity Mission (LDCM) satellite in its payload fairing in the Astrotech processing facility at Vandenberg Air Force Base in California.
Image credit: NASA/VAFB
---
Managers have given the "go" to proceed toward a Feb. 11 launch of NASA's Landsat Data Continuity Mission (LDCM) spacecraft atop a United Launch Alliance Atlas V rocket from Vandenberg Air Force Base in California.
The Landsat Data Continuity Mission (LDCM) is the future of Landsat satellites. It will continue to obtain valuable data and imagery to be used in agriculture, education, business, science, and government.
The mission will extend more than 40 years of global land observations that are critical in many areas, such as energy and water management, forest monitoring, human and environmental health, urban planning, disaster recovery and agriculture.
To learn more about LDCM and Landsat go to: 1.usa.gov/XSYBZ2
NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission.
Follow us on Twitter
Like us on Facebook
Find us on Instagram
Sentinel-2A being installed on its payload launcher adapter, on 6 June 2015 at Europe's Spaceport in Kourou, French Guiana.
The second satellite in Europe’s Copernicus programme is set for launch from Europe’s Spaceport on 23 June 2015.
Sentinel-2 carries an innovative wide-swath, high-resolution multispectral imager with 13 spectral bands for a new perspective of our land and vegetation. The second in the two-satellite mission – Sentinel-2B – is being prepared for launch in 2016.
For more information on the mission, visit www.esa.int/sentinel2
Credit: ESA–M. Pedoussaut, 2015
This Kirow rail mounted crane is one of three 125 tonne heavy duty diesel hydraulic cranes built by Kirow of Leipzig, Germany that are used in the UK. They are type KRC1200UK cranes and were built between 2004-05. The 125t capacity is for a static lift but they are also able to carry a 36t payload when mobile. This one DRK 81612 was new to Carillion Rail Plant in 2005 then in January 2008 Carillion sold its rail plant division to Colas Rail. The crane was then repainted from white and black livery into Colas Rails black, yellow and orange colours. It is seen here at Carlisle Kingmoor Yard in the consist of 6K05 destined for Crewe. For the record the crane and support vehicles are (nearest) CN 97418 KFA + DRK 81612 + CN 97416 KFA + CN 97417 KFA (furthest). The nearest vehicle, CN 97418 carries the crane beam and is 66.7t GLW / 26t tare. The crane itself is 109t GLW and the support wagon the otherside carries the counter balance weights. CN 97416 is rated the same as CN 97418 (66.7t GLW / 26t tare). Finally the furthest CN 97417 carries the mess van and tool van. This vehicle is rated at 40t GLW / 14t tare.
A rocket under DoD mission name ORS3 carries a record payload of satellites on departure from Wallops Island, Va. around 8:15 pm. Image consists of 32 photos stacked for the rocket trail.
This is the third nighttime launch I've photographed:
June 29, 2011 (ORS1 - Capitol Dome)
September 6, 2013 (LADEE - Looking over DC from VA)
Also appears at Capital Weather Gang, DCist, WeLoveDC, Prince of Petworth, and Greater Greater Washington.
The NICER payload, blanketed and waiting for launch in the Space Station Processing Facility at NASA’s Kennedy Space Center in Cape Canaveral, Florida. The instrument is in its stowed configuration for launch.
The Neutron star Interior Composition Explorer (NICER) is a NASA Explorer Mission of Opportunity dedicated to studying the extraordinary environments — strong gravity, ultra-dense matter, and the most powerful magnetic fields in the universe — embodied by neutron stars. An attached payload aboard the International Space Station, NICER will deploy an instrument with unique capabilities for timing and spectroscopy of fast X-ray brightness fluctuations. The embedded Station Explorer for X-ray Timing and Navigation Technology demonstration (SEXTANT) will use NICER data to validate, for the first time in space, technology that exploits pulsars as natural navigation beacons.
Credit: NASA/Goddard/ Keith Gendreau
NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission.
Follow us on Twitter
Like us on Facebook
Find us on Instagram
Payload specialist Millie Hughes-Fulford checks the Research Animal Holding Facility (RAHF) in the Spacelab Life Sciences (SLS-1) module aboard the Earth-orbiting Space Shuttle Columbia during mission STS-40.
Credit: NASA
Image Number: s40-30-031
Date: June 6, 1991
Seen here is Intuitive Machines’ navigation pod sensors for the company’s Nova-C lunar lander ahead of testing done at NASA’s Kennedy Space Center in Florida on Nov. 18, 2022. The test involved flying the sensors over a simulated lunar surface at the Launch and Landing Facility on a private helicopter. Intuitive Machines is scheduled to launch two missions to the Moon in 2023 – one of which will carry NASA’s Mass Spectrometer observing lunar operations (MSolo) instrument that will help analyze the chemical makeup of landing sites on the Moon, as well as study water on the lunar surface. Through NASA’s Commercial Lunar Payload Services initiative, the agency selected Intuitive Machines to deliver science and technology demonstration payloads to the Moon, contributing to NASA’s goal of establishing a sustainable human presence on the lunar surface. Photo credit: NASA/Isaac Watson
The OrbitBeyond lunar rover is seen, Friday, May 31, 2019, at Goddard Space Flight Center in Md. Astrobotic, Intuitive Machines, and OrbitBeyond have been selected to provide the first lunar landers for the Artemis program's lunar surface exploration. Photo credit: (NASA/Aubrey Gemignani)
payload is dropping only ~14km away so Desson is already almost in position and awaiting landing in a few minutes
Presentations on the ExoMars payload by Daniil Rodionov (ACS, FREND) IKI Moscow, Manish Patel (NOMAD) Uni Padua, and Gabriele Cremonese, Co-PI for CASSIS, Astronomical Observatory, Padua.
Images credit: ESA/R. Palmari
NASA has selected three commercial Moon landing service providers that will deliver science and technology payloads under Commercial Lunar Payload Services (CLPS) as part of the Artemis program. Each commercial lander will carry NASA-provided payloads that will conduct science investigations and demonstrate advanced technologies on the lunar surface, paving the way for NASA astronauts to land on the lunar surface by 2024.
The selections are:
• Astrobotic of Pittsburgh has been awarded $79.5 million and has proposed to fly as many as 14 payloads to Lacus Mortis, a large crater on the near side of the Moon, by July 2021.
• Intuitive Machines of Houston has been awarded $77 million. The company has proposed to fly as many as five payloads to Oceanus Procellarum, a scientifically intriguing dark spot on the Moon, by July 2021.
• Orbit Beyond of Edison, New Jersey, has been awarded $97 million and has proposed to fly as many as four payloads to Mare Imbrium, a lava plain in one of the Moon’s craters, by September 2020.
This commercial lander from Orbit Beyond of Edison, New Jersey, will carry NASA-provided science and technology payloads to the lunar surface, paving the way for NASA astronauts to land on the Moon by 2024.
All three of the lander models were on display for the announcement of the companies selected to provide the first lunar landers for the Artemis program, on Friday, May 31, 2019, at NASA's Goddard Space Flight Center in Greenbelt, Md.
Read more: go.nasa.gov/2Ki2mJo
Credit: NASA/Goddard/Rebecca Roth
The OrbitBeyond lunar lander is seen, Friday, May 31, 2019, at Goddard Space Flight Center in Md. Astrobotic, Intuitive Machines, and OrbitBeyond have been selected to provide the first lunar landers for the Artemis program's lunar surface exploration. Photo credit: (NASA/Aubrey Gemignani)
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
The Messerschmitt Me 262 F was a series of multi-purpose jet planes designed by Messerschmitt for the Luftwaffe that entered service during the final phase of the Second World War in Europe. The aircraft’s design was begun in the summer of 1943 under the project handle P.1099, intended as an improvement to the successful Messerschmitt Me 262 jet fighter and also as a replacement for the Arado Ar 234 bomber/reconnaissance aircraft. The primary focus was on more payload, being either usable for more fuel (since early jet engines had poor mileage and therefore range and endurance) or for weapons, including bombs in an internal bomb bay that would enable the aircraft to fulfil a similar tactical role as the British de Havilland Mosquito. Beyond this high-speed bomber (Schnellbomber) variant, the P.1099 would also be a suitable basis for a fast reconnaissance plane, interceptors and night fighters, and trainer versions were also planned.
The Messerschmitt P.1099 was a 12 m long, conventional-looking aircraft with a wingspan of 12.6 m. It had a much wider fuselage than the Messerschmitt Me 262. It had a circular shape with a diameter of 1.7m (5 ft 6¾ in) and the cockpit was now moved closer to the aircraft’s nose, above the front landing gear well. The baseline aircraft featured a side-by-side cockpit for a crew of two, even though different layouts were envisioned for the specialized variants, including single-seaters. To save development time and to use existing jigs and tools as much as possible, the P.1099 retained the wings and the tail section of the Me 262A-2a. Despite a higher total weight (the P.1099’ MTOW was about 3 tons higher), the planned powerplants were initially two uprated Junkers Jumo 004 turbojet engines, later to be replaced by more powerful Heinkel HeS 011 turbojets.
In January 1944 the P.1099 was accepted by the RLM and received, despite the aircraft’s different structure, the designation “Me 262 F”. The first variant, the Me 262 F-1 (internally designated P.1099A), was the baseline aircraft under the handle “Jäger I”, a jet-powered single seat daytime fighter. There were three planned versions, differing mainly in armament: Version F-1a was armed with four MK 108 30 mm cannon in the lower fuselage, comparable with the earlier Me 262 A fighter, just with more fuel and ammunition. Version F-1b carried two MK 103 30 mm cannon with longer range, firepower and ammunition supply, and Version F-1c was a heavy daytime fighter with two MK 108 and two MK 103 cannon in the nose.
In parallel the Me 262 F-2 was developed as a more heavily armed and armored variant, as a dedicated heavy bomber interceptor (“Pulkjäger” or “Zerstörer”) under the handle “Jäger II”. Again, three versions were foreseen: Version F-2a would be armed with a single MK 108 cannon and a heavy MK 112 55 mm cannon in the nose. Version F-2b was the same, but it was armed with a MK 114 50 mm cannon instead of the Mk 112. Both were single seaters with a heavily armored cockpit and canopy.
The F-2c was a more thoroughly modified two-seater version; it was armed with a single MG151/20 in a small nose turret, a pair of Mk 103 in the rear of the cockpit firing up- and backwards and two defensive MG 131 in remote-controlled FDL 151 barbettes in the tail. Due to the significant changes this model had the internal project designation P.1099B.
Another two-seater, the F-2d, remained very close to the original baseline aircraft with a crew of two in a side-by-side cockpit. This aircraft was armed with the standard four MK 108 in the nose, plus one launch rail under each wing for Ruhrstahl X-4 guided missiles, which were launched and steered by the second crewman via a wire connection with the mothership. This variant did not come to fruition, however, after the X-4 missile project had been cancelled in early 1945.
All P.1099 fighters also had hardpoints under the outer wings for racks with twelve 55mm R4M unguided air-to-air missiles each, a detail taken over from the Me 262 A, even though the fuel load had to be reduced to carry them. The radio equipment of all these versions would be a FuG 16, Peil G6, FuG 101 radio altimeter, FuBl 2 blind landing equipment, as well as the FuG 25a Erstling identification friend or foe transceiver.
Beyond these initial day fighter variants, further types based on the P.1099 airframe were envisioned, too. The F-3 was a dedicated night fighter version, developed in parallel to the Me 262 G. It was based on the F-2a heavy day fighter, but it carried a crew of two (the pilot and a rearward-facing radar operator) and was equipped with a FuG 240 “Berlin” radar set and a rotating dish antenna under a streamlined plywood cover in the nose. The armament consisted of four MK 108 under the nose, similar to the F-1a day fighter, plus two additional, upward-firing MK 108 cannon (“Schräge Musik”) in the rear fuselage.
Other proposed variants (with less priority, though) were the F-4 and the F-5, which were to become the basis for fast bombers and reconnaissance aircraft with only light defensive armament, typically only a pair of MG 131 in remote-controlled tail barbettes was to be carried. The F-4 resembled the baseline P.1099A, with two bomb bays in front of and behind the main landing gear wells and a crew of two seated side-by-side in a pressurized cockpit. Two MK 108 were carried in the nose, plus the MG 131 tail barbettes. The F-5 was similar but featured a glazed bomb aimer/navigator station in the nose instead of the MK 108’s and the glazing above the pilot’s station was reduced and asymmetrical. In both bomber variants the fuselage tanks were re-arranged to make room for a single SC 1.200 in the front bomb bay, but combinations of smaller bombs could be carried, too. Alternatively, mounts for up to three cameras or a 1.350 l auxiliary tank for extended range could be carried in the bays, too.
Initial flight tests of the Me 262 F in late 1944 showed severe directional instability: especially after fuel and ammunition had been depleted and the center of gravity shifted the aircraft tended to become nose-heavy and ditch down if it was not carefully monitored and trimmed by the pilot. To cope with this problem, the engine mounts were modified, so that the CoG was shifted back. Compared with the original Me 262 the engines were placed roughly 900 mm (35.5 in) further back under the wings. The emptying sequence of the fuselage tanks was also changed, and this mostly mended the problems. Another measure to mend the directional instability issues was the enlargement of the tail surfaces, even though later production aircraft frequently had smaller Me 262 A stabilizers fitted due to material shortages and simple lack of parts.- However, due to the higher weight the Me 262 F’s handling and agility were very limited – but most of its intended roles rather relied on speed, anyway, so that dogfights could be avoided.
From 1944 on the war situation worsened considerably, and production of the new Me 262 F superseded the A variant only on selected production lines. A disused mine complex under the Walpersberg mountain was adapted for the production of complete aircraft. These were hauled to the flat top of the hill where a runway had been cleared and flown out. Between 20 and 30 Me 262 Fs were built here until early 1946, primarily fighters, the underground factory being overrun by Allied troops before it could reach a meaningful output. Wings were produced in Germany's oldest motorway tunnel at Engelberg, to the west of Stuttgart. At B8 Bergkristall-Esche II, a vast network of tunnels was excavated beneath St. Georgen/Gusen, Austria, where fully equipped fuselages for the Me 262 at a planned monthly rate of 450 units on large assembly lines were to be produced from early 1945.
After the type’s introduction to frontline units in early 1945 further handling problems arose through the aircraft’ weight, resulting from its high wing load. Both starting and landing run were excessive, so that the number of airfields from which it could be operated was relatively small. No real short-term solution could be found without fully re-designing the wings, so that RATO bottles were frequently used to get a fully loaded Me 262 F up into the air from standard airfields. These were typically fitted to racks which were mounted under the fuselage, flanking the rear bomb bay.
The Me 262 F’s landing speed was dangerously high, too. A retrofittable brake parachute, housed in a simple tubular fairing under the tail, was developed to reduce the landing distance and save brakes, which frequently overheated and could set the landed aircraft aflame.
From the Me 262 F-2a “Pulkzerstörer I”, only a small number were built and eventually entered service. Its main armament, the MK 112, was a heavy German machine cannon produced by Rheinmetall-Borsig from 1945 on – in fact, the MK 112 was basically a scaled-up MK 108, a very compact weapon with relatively low weight. The MK 112 had a caliber of 55 mm and thus fired much larger shells than the 30 mm MK 108, but the rate of fire was significantly lower (300 rounds / min compared to about 600-660 rounds / min of the MK 108). This large-caliber gun was designed primarily to combat heavy bombers, its rate of fire would have been too slow for effective aerial battles with escort fighters – but the Me 262 F would not have been a dogfighter, anyway, so that the “hit-and-run” mission profile suited the aircraft well. Fire tests showed that a single MK 112 hit with mine grenades could destroy a bomber, and with a rate of fire of five shells per second this weapon could inflict considerably higher losses on the incoming streams of Allied bombers compared to other on-board weapons used on the German side. Only the unguided R4M missiles were as effective, but the MK 112 offered considerably higher accuracy and the opportunity to execute more than just a single attack run on an incoming bomber formation.
The MK 112 was mounted in the lower starboard section of the Me 262 F-2a’s nose, its barrel protruded more than 2 m (7 ft) from its nose. The gun’s drum magazine with sixty rounds partly took up the rear space of the cockpit behind the pilot and the gun mount even used up space of the weapon bay on port side, so that only a single MK 108 with 100 rounds as an additional weapon was mounted in the lower port side weapon bay.
Its sister, the Me 262 F-2b, remained on the drawing board, because its main weapon, the 50 mm MK 114 autocannon that had been derived from the 5 cm Pak 38 anti-tank gun, had turned out to be over-complicated, overweight and unreliable. A refined version was developed as the MK 214A, though, but after flight test from February 1945, but the weapon was not deployed operationally.
Only a handful Me 262 F-2a Pulkzerstörer were eventually fielded and operated before the end of hostilities – beyond the low production numbers the lack of fuel and loss of suitable airfields highly limited the aircraft’s potential. Probably less than ten were used by operational units, including JG 53 “Pik As”, in which they served alongside other interceptors, including other Me 262 variants. Typically, bomber formations were approached from the side of a bomber formation, where their silhouettes were widest, and while still out of range of the bombers' machine guns. This broadside-attack tactic was very effective, and the aircraft’s high speed allowed the interceptors to turn around 180° and make at least a second attack run from the opposite side, before the machines dashed off and returned to their bases.
General characteristics
Crew: One
Length: 14,32 m (46 ft 11 in) overall
12,00 m (39 ft 3¾ in) fuselage only, w/o brake parachute housing
Wingspan: 12,61 m (41 ft 3¾ in)
Height: 4,43 m (14 ft 6 in)
Wing area: 24,2 m² (236 sq ft)
Empty weight: 5.061 kg (11,148 lb)
Loaded weight: 8.762 kg (19,300 lb)
Max. take-off weight: 10.062 kg (22,163 lb)
Powerplant:
2× Junkers Jumo 004 C turbojets with 12 kN (2,697 lb st) each
Performance
Maximum speed: 930 km/h (577 mph, 505 kn)
Cruising speed: 805 km/h (500 mph, 438 kn) at 6.500 m (21,290 ft)
Range: 1.340 km (830 ml, 728 nm) at 6000 m with internal fuel only
Service ceiling: 11,450 m (37,570 ft)
Rate of climb: 18 m/s (3,540 ft/min) at max. weight
Armament:
1× 55 mm (1.96 in) MK 112 machine cannon with 60 rounds
1× 30 mm (1.18 in) MK 108 machine cannon with 100 rounds
Hardpoints under the outer wings for racks with twelve 55mm R4M unguided air-to-air missiles
The kit and its assembly:
This became a submission to the late 2021 “Gunships” group build at whatifmodellers.com – what would such a competition be without at least one gun-toting German Luft ’46 interceptor? The Messerschmitt P.1099 lent itself for such a build. Since 1996 Revell offers a 1:72 IP model kit of this paper aircraft, depicting more or less the two planned versions: a basic single-seat day fighter and a heavy two-seater Zerstörer, both based on the same basis.
This what-if model was based on Revell’s interpretation of the P.1099A, and the kit goes together well. Fit is very good, even though some designs are IMHO a bit dubious. The kit’s weakest point: Revell unfortunately missed the important detail of the modified engine nacelles: the kit comes with standard Me 262 wings and engines, but due to CoG reasons the P.1099 would have had its engines moved back by about 900 mm, as mentioned in the background. I corrected this on this build with some PSR – sounds simple, but since the nacelles are not expected to be stuck to the wings in their new position roughly 1 cm further back, some serious bodywork had to be done.
Otherwise the kit was basically built OOB. I just left away the inner wheels from the main landing gear because I found the twin wheels to be “too much” for this upgraded Me 262. The P.1099 might have been heavier than the Me 262, but…? And the wheels’ tractor-like tread design looks IMHO out of place, too, so that I replaced them with a pair of MiG-21 wheels, left over from a KP kit.
The cockpit was taken OOB, even though I have doubts concerning the canopy. And when you look at mockup pictures of the P.1099 you realize that cockpit access had been facilitated through a side door at starboard, similar to the D. H. Mosquito. The cockpit tub does not consider this hatch at all, and the engraved door on the fuselage (it’s actually there!) is so tiny that only a Halfling might use it?
Well, I stuck with it “as is” and just added a pilot figure (specifically from a Matchbox Hawker tempest, because it is one of the rare cases that you get a WWII pilot wearing an oxygen mask) and a “barrel” behind the bulbous pilot seat because there’s a lot of free space in this single seat variant that is otherwise occupied by a rear gunner in Revell’s P.1099B kit. I also have doubts concerning the kit’s canopy, since the original P.1099 had a cockpit for two seated side-by-side, with a canopy that resembled the D.H. Mosquito’s a lot. I am also not certain about the stabilizers – the kit comes with standard Me 262 parts, but trustworthy sources I consulted suggest that not only the fin had been enlarged (depicted well in Revell’s kit), but also the stabilizers? To improve this, I implanted a pair of modified stabilizers that came from a Heller PZL P.23 light bomber. Sounds odd, but they were a very good match in size, shape and thickness!
The only major modification concerns the armament, even though it became just a “graft-on” solution. On the lower left side, the upper gun port was PSRed away. On the right side I added a bulged fairing for the MK 112. It was sculpted from a Matchbox Saab J29 drop tank and blended into the hull with PSR. Protruding spent cases fairings were added for both guns. The MK 112 gun barrel is a resin piece, left over from a ModelTrans tank conversion set and actually depicts a German 55 mm gun, so that this became a perfect donor piece.
Since the airframe still looked rather clean and boring I finally added a pair of JATO bottle racks to the rear fuselage (scratched from styrene profile but left empty) and a brake parachute fairing under the fin, carved from a piece of sprue.
Furthermore, a display adapter was installed into the fuselage for in-flight pictures.
Painting and markings:
This became a challenge, because I wanted a rather unusual livery, neither a standard RLM 81/82/76 late-war combo nor an improvised-cammo-over-bare-metal finish. After some research I settled upon something that was actually carried by some He 177 bombers around 1944: a uniform RLM 74 (Graugrün, Humbrol 245) upper surface with “cloudy” mottles in RLM 76 (Humbrol 247). This appears like a winter camouflage, but it’s actually quite effective at medium altitude, esp. over a cloudy landscape. The original bombers had light blue (RLM 65) undersides, but for the P.1099 from a later period and as a fighter I rather used a darker shade of RLM76 in the form of Tamiya XF-23 (Light Blue). The model received a black ink washing and some post-panel-shading.
The cockpit interior became RLM 66 (Schwarzgrau, Humbrol 67) while the landing gear and the well were painted in uniform RLM 02 (I used Revell 45, a slightly more greenish tone), with wheel discs in RLM 66, too.
Unit markings became minimal and quite sober. I gave the aircraft a typical late-war “Reichsverteidigung” fuselage band, and in JG 53’s case it is plain black. The black band was deliberately chosen because it is a good, much darker contrast to the murky RLM 74, so that the latter appears lighter than it actually is, lowering the contrast to the RLM 76 spots.
The decals were puzzled together from various sources. As an aircraft of the 3rd group the unit’s ID color would be yellow, reflected in the tactical code and the fin tip. For some contrast and to emphasize the long gun barrel I gave it white and black stripes – as a security measure for ground handling. For some more variety I painted one air intake in very dark grey (Revell 06, Anthracite) and the other one in steel Metallizer, simulating replacement parts. The Balkenkreuze come from various sheets – I used simplified “low viz” versions all around. The undulating yellow bar for the 3rd group comes from a TL Modellbau sheet, while the yellow “4” came from a Fw 190 A sheet from Sky Models. A small “4” on the nose was added as a wacky detail, too, the “Pik As” unit markings came IIRC from a Hobby Boss Bf 109 sheet. Since they turned out to have poor contrast/opacity I only used a few stencils from the P.1099A sheet, but due to the disruptive paint scheme this is not apparent.
Finally, the model was sealed with a coat of matt acrylic varnish (Italeri) and a wire antenna, scratched from heated black sprue material, was added between cockpit and fin.
Well, this modified Messerschmitt P.1099A looks simple, but the modified engine nacelles as well as the gun fairing under the nose called for serious PSR. The result looks quite natural, though, and AFAIK this weapon configuration was actually on German drawing boards. However, I am not certain about the cockpit canopy and other details on Revell’s kit, reference information is contradictive.
The paint scheme looks good, even though it was lent from a heavy bomber, and the poor Humbrol enamels did not yield a finish that I had hoped for – the paintwork could certainly have been better, but the overall impression of a late-war Pulkzerstörer is O.K., and this eventually counts.
The United Launch Alliance Atlas V payload fairing containing the National Oceanic and Atmospheric Administration’s (NOAA) Joint Polar Satellite System-2 (JPSS-2) arrives inside the vertical integration facility at Space Launch Complex 3 at Vandenberg Space Force Base (VSFB) in California on Oct. 18, 2022. Inside the fairing, JPSS-2 is stacked atop NASA’s Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) secondary payload. The fairing will be attached to the Atlas V rocket. JPSS-2 is the third satellite in the Joint Polar Satellite System series. It is scheduled to lift off from VSFB on Nov. 1 from SLC-3. JPSS-2, which will be renamed NOAA-21 after reaching orbit, will join a constellation of JPSS satellites that orbit from the North to the South pole, circling Earth 14 times a day and providing a full view of the entire globe twice daily. The NOAA/NASA Suomi National Polar-orbiting Partnership (Suomi NPP) satellite, and NOAA-20, previously known as JPSS-1, are both already in orbit. Each satellite carries at least four advanced instruments to measure weather and climate conditions on Earth. LOFTID is dedicated to the memory of Bernard Kutter. LOFTID will demonstrate inflatable heat shield technology that could enable a variety of proposed NASA missions to destinations such as Mars, Venus, and Titan, as well as returning heavier payloads from low-Earth orbit. Photo credit: USSF 30th Space Wing/Randy Beaudoin
Quoting Smithsonian National Air and Space Museum | Lockheed 1049F-55-96, "Constellation":
In June 1938, Lockheed began design work on an airliner to satisfy a Transcontinental Western & Air (later Trans-World Airlines) (TWA), requirement for a non-stop transcontinental airliner with a 3,500-mile range and 6,000 lb. payload capability. Construction of a prototype began in 1940. The U.S. was soon involved in the Second World War and all transport production was directed to military needs and consequently the prototype first flew on January 9, 1943, as a military aircraft. Hydraulic-powered controls were used, full feathering and reversing propellers were also installed. First known by its civil designator as Model 049, it soon became better known during wartime by its military designation, the C-69 Constellation. Improvements were steadily made, beginning with the L-649, which was the first Constellation built as a commercial type and the L-749 which was the long-range version of the 649.
The next stage in development led to the L-1049 Super Constellation. The first prototype Super Constellation was a "stretched" version of the original Model 049 (C-69), modified by lengthening the fuselage from 95’ 2" to 113’ 7", adding more fuel capacity, more powerful engines, higher gross weight, and increasing its tourist-class seating from 69 to 92. These L-1049 aircraft were powered by four 2700 hp Wright engines. The prototype aircraft was first flown on October 13, 1950. The production version of the Model L-1049, of which fourteen were built for Eastern Airlines, and ten for TWA, ended up with a strengthened fuselage, stiffened outer wing panels and rectangular windows instead of the Constellation’s round ones. This production version was first flown on July 14, 1951, and the type entered service on December 7, 1951, with Eastern Airlines (EAL). The last Model 1049 produced was delivered in September 1952. Passenger accommodations on the 1049 varied - 88 for Eastern; 65 over water or 75 domestic for TWA, with adaptation to 102 in high density configuration. The flight crew consisted of three, with two cabin attendants.
The Model 1049 was followed by an A version (military WV-2, WV-3, and RC-121D) the B version (USN R7V-1, USAF RC-121C, the presidential VC-121E), and the C version, the first commercial transport certificated with turbo-compound engines. These Double Cyclone Wright engines had three "blow-down" turbines, which converted the heat energy of exhaust gases into additional power, with a 20% reduction in fuel consumption.
The engine produced 3,250 h.p. for take-off for which the aircraft weight had been increased to 133,000 lb. The Model 1049C, Turbo-Cyclone-powered Super Constellation began flight trials on February 17, 1953. A convertible model, the 1049D was built for Seaboard and Western Airlines in 1954. They were fitted with reinforced flooring and they had main deck cargo loading doors on the part side of the fuselage, fore and aft of the wings. They could carry either 18 tons of freight or up to 104 passengers. Maximum take—off weight was 135,400 lb. A Model 1049E was delivered between May 1954 and April 1955 which was identical to the 1049C but with the increased take-off and landing weight of the 1049D. Next on the model list was the Model 1049F, which was Lockheed’s designation for 33 C-121C cargo/personnel transports built for the USAF and fitted with stronger landing gear. The F was followed by a "G" model which was determined to be the most successful version of the Super Constellation. It was powered by 3,400 h.p. engines, it had longer range than the E, and the maximum take-off weight was increased to 137,500 lb. with some models modified to 140,000 lb. Often known as Super Gs, 42 of these aircraft were delivered to domestic carriers (20 to TWA, 10 to EAL, and 4 to NW), and 50 to foreign carriers. The final version to the Super Constellation was the Model 1049H, a combination of Model 1049D, and the convertible and improved Model 1049G.
The Super Constellation and its derivatives represent, along with the Douglas DC-7, the ultimate step in the development of longer range, more capacity and more powerful piston-engined aircraft to meet the needs of both commercial and military aviation. Eastern Air Lines, the first airline to order Super Constellations, introduced the type on its New York-Miami route on December 15, 1951. It was able to take advantage of the 1049s additional capacity to absorb an increased holiday seasonal demand. A decade later on April 30, 1961, Eastern inaugurated its revolutionary air shuttle, no-reservation service, Washington-New York-Boston with Super Constellations. Incidentally, as it turns out, the last use of the Super Constellations by a major U.S. domestic airline was a backup for the shuttle until February 1968.
TWA, a co-sponsor with EAL on the design of the Super Constellation, first used the Model 1049 on its domestic network in September 1952, and when it received the higher performance "C" version, it began scheduled non-stop transcontinental service on October 19, 1953, a first for the industry. On its trans-Atlantic routes, TWA made use of its early Super Constellation models, but on November 1, 1955, it could offer improved service, using its newer Model l049Gs which enabled it to operate non-stop most of the time, at least in the eastbound direction.
Over the Atlantic and other long distance routes, the Super Constellation was also operated by several former Constellation operators, until Lockheed was again challenged by Douglas and its DC-7C, the first aircraft capable of flying non-stop in both directions over the North Atlantic. To compete, Lockheed responded by mating the Super Constellation’s fuselage and tail surfaces with an entirely new wing, resulting in a major redesign. The outcome, the Model 1649A Starliner, which entered service on June 1, 1957, it was the most attractive of the Constellation series, but its success was short lived for in six months it was overtaken in 1958 by the faster, turbine-powered (Bristol Britannia) and jet aircraft (the Boeing 707-120) which finally made all propeller-driven aircraft obsolescent in October 1958. A total of 44 Lockheed L-1649As were built, 29 went to TWA, 10 to Air France, 4 to Lufthansa.
When the age of piston-powered passenger transport aircraft was coming to a close, Lockheed offered to carriers a convertible Model 1049H, suggesting that when they were no longer competitive in the passenger market they could convert to carrying cargo. This second hand market did materialize briefly with the H model but the market for 1049s soon dried up as they were becoming too expensive to operate and maintain. The engines were giving problems not only in the Lockheed Super Connies, but also in the Douglas DC-7s, and the aircraft were becoming known as the "world’s best trimotors." A total of 579 Super Constellations were built but by the end of 1980 only four Super Constellations remained in airline service.
The Museum’s Lockheed C-121C (1049F-55-96), with former Air Force serial number 54-177, and now registered N-1104W, is one of the thirty-three C-l2lCs delivered to the USAF and the Atlantic Division of the Military Air Transport Service at Charleston AFB, South Carolina. This airplane arrived there in March 1956 and was assigned to the 1608th Air Transport Wing. Its original configuration was that of an over-water cargo/passenger transport, having eight crew members and accommodations for up to 80 passengers.
While with the 1608th ATW, the "Super Connies" flew throughout the Caribbean, made crossings of the North and South Atlantic to Europe, the Mediterranean, the Middle East and as far east as India. They participated in the Hungarian airlift during 1956-57, carrying refugees from Eastern Europe to the U.S. and flew troops to Lebanon during the crisis there in 1958. In general, this "Connie" and others of the unit flew a variety of transport missions including cargo, passenger, medical evacuation, and humanitarian support.
On October 30, 1962, the Museum’s C-121C left the regular USAF and was transferred to the 183rd Air Transport Squadron of the Mississippi Air National Guard. This unit was re-designated the 183rd Military Airlift Squadron as of January 1, 1966. While with the 183rd, it flew transport, evacuation, and support missions across the North Atlantic. It remained with the Guard unit until April 19, 1967, at which time it was transferred to the West Virginia ANG and the 167th Military Airlift Squadron. This and other C-l2lCs of this unit flew across the Atlantic and Pacific Oceans, the Caribbean, and to South America, taking part in operation "Creek Guardlift" in Europe from June 1971 to March 1972.
This Super Constellation served with the 167th until 1972 and was again transferred, this time to the 193rd Tactical Electronic Warfare (TEW) Squadron, Pennsylvania ANG, at Olmstead AFB, Middletown, Pennsylvania. This squadron had one other C-121, an electronic countermeasure configured aircraft. Together they took part in many exercises and training missions such as "Reforger VI," "Flintlock" and "Northern Merger" in 1974. While operating out of Ramey AFB in Puerto Rico, they took part in "Gallant Shield" and "Solid Shield," both in 1975.
This "Connie" remained with the 193rd and operations with the ANG until November 1977, when it was retired after 21½ years of military service, thousands of flying hours, and countless ocean crossings, which for propeller driven aircraft were long endurance flights often exceeding 12 or 14 hours. When taken out of service, it was transferred to the Military Aircraft Storage and Disposition Center (MASDC), at Davis Monthan AFB, Arizona, for storage. It remained there until August 1981, at which time it was sold at auction to Ascher Ward of Classic Air Inc., and flown to Van Nuys Airport, California, where the new company was forming. As a civil aircraft in a hoped-for new career, it was assigned FAA registration number Nll04W. It retained its 193rd TEW paint scheme of a royal blue cheat-line outlined in gold, with a white cabin roof and empennage, and pale blue under surfaces. It carried its small serial number on the left side under the stabilizer and a U.S. flag on the center fin.
The newly formed company Classic Air Inc., which intended to operate two or three passenger—carrying "Connies" between Los Angeles and Reno, Nevada, failed to receive FAA approval and the airplanes remained dormant. At this time the National Air and Space Museum was seeking a Super Constellation. Mr. Darryl Greenameyer soon became a party to this transaction as he had acquired two of the Constellations from Air Classics. He negotiated a trade with NASM a C-121C, NllO4W in exchange for two Grumman HU-16 Albatrosses drawn from the remaining holdings of spare Albatross belonging to the Smithsonian, and which had been used in support of one Albatross that was operated by the Museum of Natural History.
Gift of Mr. Darryl G. Greenamyer
Manufacturer:
Country of Origin:
United States of America
Dimensions:
24 ft. 9 in. High 116 ft. 2 in. Long 72,815 lbs. Weight 123 ft. Wing Span
Physical Description:
123ft. span, 116ft. 2in. long, 24ft. 9in. high; 72,815lbs. empty weight.
• • • • •
Quoting Smithsonian National Air and Space Museum | Pathfinder Plus:
Pathfinder Plus is a high-altitude, solar-powered, unmanned experimental aircraft intended to explore the possibilities of unlimited-duration, high-altitude reconnaissance. During the 1990s, it conducted 10 test flights, three of which set altitude records, the highest of which was 24,445m (80,201 ft). The aircraft was built under the sponsorship of the Lawrence Livermore National Laboratory and the Ballistic Missile Defense Organization. It has a carbon fiber main spar and is covered with a polymer skin and silicon solar cells that power eight electric motors. The project was later managed by NASA Dryden.
Donated by Aerovironment Inc.
Dimensions:
Wingspan: 36.3 m (121 ft)
Length: 3.6 m (12 ft)
Gross weight: 315 kg (700 lb)
Speed: 24-40 kmph (15-25 mph)
• • • • •
Quoting Smithsonian National Air and Space Museum | Federal Express's Dassault Falcon 20:
The Dassault Cargo Falcon 20 is a French jet aircraft that, on April 17, 1973, became the first to carry a Federal Express air package. This was a new milestone in the history of air transport in the United States and created a new category of airline, the exclusive air express carrier. Within a decade, no less than thirty-three were flying on the spokes of the Federal Express network. The service was so successful that, by the early 1980s, its front-line aircraft were expanded to the McDonnell Douglas DC-10Cs, whose cargo holds were big enough to carry several Falcons each.
The first Dassault Falcon made its maiden flight on May 4, 1973. It is a well-proportioned, all metal low-wing monoplane, with full cantilever wing and tail surfaces, pressurized fuselage, and retractable tricycle dual-wheel landing gear. It is powered by two aft-mounted General Electric CF-700-2D turbofan engines. For cargo use, the Series 20 was modified by several basic changes, the success of which is a tribute to the inherent soundness of the design. The Cargo Falcon 20 also features an oversized cargo door, measuring 55 inches x 74.5 inches, and a strengthened floor to accept loads of concentrated weight.
Gift of the Federal Express Corp.
Manufacturer:
Date:
1973-1982
Country of Origin:
United States of America
Dimensions:
Height: 17 ft 7 in
Length: 56 ft 4 in
Wingspan: 53 ft 6 in
Weight: 15,940 lbs
Materials:
Overall: Aluminum
Physical Description:
Twin engine jet transport, purple and white, orange trim, all metal.
Researchers communicate with the BARREL ground station during preparations for launch. The white box in the background is the science payload and the orange and white parachute can be seen on the ground in front of it. On the left is BARREL Principal Investigator Robyn Millan of Dartmouth College in Hanover, N.H.; on the right is BARREL Co-Investigator Michael McCarthy of the University of Washington in Seattle.
Credit: NASA/Goddard/BARREL/M. Krzysztofowicz
Read more: www.nasa.gov/content/goddard/nasas-barrel-returns-success...
--
Three months, 20 balloons, and one very successful campaign. The team for NASA's BARREL – short for Balloon Array for Radiation belt Relativistic Electron Losses -- mission returned from Antarctica in March 2014. BARREL's job is to help unravel the mysterious Van Allen belts, two gigantic donuts of radiation that surround Earth, which can shrink and swell in response to incoming energy and particles from the sun and sometimes expose satellites to harsh radiation.
While in Antarctica, the team launched 20 balloons carrying instruments that sense charged particles that are scattered into the atmosphere from the belts, spiraling down the magnetic fields near the South Pole. Each balloon traveled around the pole for up to three weeks. The team will coordinate the BARREL data with observations from NASA's two Van Allen Probes to better understand how occurrences in the belts relate to bursts of particles funneling down toward Earth.
BARREL team members will be on hand at the USA Science and Engineering Festival in DC on April 26 and 27, 2014 for the exhibit Space Balloons: Exploring the Extremes of Space Weather.
NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission.
Follow us on Twitter
Like us on Facebook
Find us on Instagram
A United Launch Alliance (ULA) Delta IV Heavy rocket carrying a critical payload for the National Reconnaissance Office (NRO) lifted off with the NROL-82 mission from Space Launch Complex-6 on April 26 at 1:47 p.m. PDT. Photo credit: United Launch Alliance
Astronaut Taylor E. Wang, payload specialist on STS-51-B. Born on June 16, 1940, Wang was the first ethnic Chinese astronaut.
Credit: NASA
Image Number: s84-36141
Date: June 20, 1984
A substantial payload of rail commuters in June 1994 presents at Station Square Petts Wood, for homeward conveyance by MC3 on route R3. Only ten years earlier Poverest Road gained its first bus service in the form of experimental route 284.
Two Galileo navigation satellites have been integrated on their payload dispenser system at Europe's Spaceport in Kourou, French Guiana. The pair will be mated atop a Soyuz Fregat upper stage and encapsulated in the protective payload fairing.
Galileo SATs 5-6 are scheduled to lift off at 12:37 GMT (14:27 CEST, 09:27 local time) on 22 August from Europe’s Spaceport in French Guiana on top of a Soyuz rocket.
More information: www.esa.int/Our_Activities/Navigation/The_future_-_Galile...
Credit: ESA/CNES/Arianespace/Optique Vidéo du CSG - P Baudon
©All photographs on this site are copyright: ©DESPITE STRAIGHT LINES (Paul Williams) 2011 – 2021 & GETTY IMAGES ®
No license is given nor granted in respect of the use of any copyrighted material on this site other than with the express written agreement of ©DESPITE STRAIGHT LINES (Paul Williams). No image may be used as source material for paintings, drawings, sculptures, or any other art form without permission and/or compensation to ©DESPITE STRAIGHT LINES (Paul Williams)
.
.
Photograph taken in the magic of the golden hour around sunrise at an altitude of Two metres, at 06:42am on Thursday 5th September 2019 around sunrise off 1st Street and Bevan Avenue, between the boat jetty and Bevan Avenue Fishing Pier in beautiful Sidney by the sea on Vancouver Island, British Columbia, Canada.
In the distance we see Mt Baker in Washington State, USA, an active glaciated andesitic stratovolcano in the Cascade Volcanic Arc and the North Cascades. Standing 3,286 metres tall, she was first ascended in 1868, her last eruption recorded in 1880.
The four Salishan language speaking First Nation bands nearest to Mount Baker know her by different names. Known to the Halkomelem as Kwelxá:lxw, Kwelshán (wounded by a shot) to the Lummi,Teqwúbe7 (snow-capped peak) to Lushootseed speakers along the Skagit River, and to the Nooksack language, the ice- and snow-covered top is Kweq’ Smánit (white mountain) while the high meadows around the peak are Kwelshán (shooting place)”. There are also unsubstanciated references to Mt Baker as Komo Kulshan (pronounced kō-ō’mah’ kool-shän’), the name for the Middle Fork which originates from the glaciers such as Deming and Thunder on the western slopes, though Koma or Komo Kulshan is not a native name for the mountain in any of the twenty three collective Salishan languages.
The name Mount Baker first appeared in print in Captain Vancouver’s 1798 narrative of his voyage around Vancouver Island. Legend has it that his third-lieutenant, Joseph Baker, was the first to spot the mountain while they sailed into Dungeness Bay on April 30th, 1792.
The Bevan Avenue fishing pier is one of the main focal points in Sidney, and Work commenced on the pier in 1993 with Phase one, a 90 metre straight section being completed in 1996. A year later the 110 metre Phase two section was completed.
Currently in February 2023, tenders are being invited for major renovations to the pier to include Localized replacement of coating system on pier structures, Installation of a pile wrapping system, Localized steel repairs, and Installation of supplemental sacrificial anodes.
Work will commence April 15th 2023 and terminated in September 2023.
.
.
Nikon D850 Focal length 24mm Shutter speed: 1.5s Aperture: f/16.0 iso64 RAW (14 bit uncompressed) Image size L (8256 x 5504 FX) Focus mode: AF-C focus 51 point Area Mode: 3D- tracking Exposure mode: Aperture priority exposure Nikon Back button focusing enabled Metering Mode:Matrix metering White balance: Natural light auto, 0, 0 Colour space: Adobe RGB Long Exposure Noise Reduction: On Nikon Distortion control: On Picture control: (SD) Standard Sharpening +3.00 Clarity +1.00 Vignette control: Normal Active D-lighting: Auto
Nikkor AF-S 24-120mm f/4G ED VR. Lee SW150 MKII filter holder. Lee SW150 77mm screw in adapter ring. Lee SW150 0.9 (3 stops) Reverse Neutral density graduated glass filter. Lee SW150 Filters field pouch. Nikon EN-EL15a battery.Mcoplus professional MB-D850 multi function battery grip 6960. Matin quick release neckstrap. My Memory 128GB Class 10 SDXC 80MB/s card. Lowepro Flipside 400 AW camera bag. Nikon GP-1 GPS module. Hoodman HEYENRG round eyepiece oversized eyecup.Manfrotto 055XPROB Tripod 3 Sections (Payload: 5.6kgs). Manfrotto 327RC2 Light Duty Grip Ball Magnesium Tripod Head (Payload: 5.5kgs). Manfrotto quick release plate 200PL-14. Jessops Tripod bag.Nikon MC-DC2 remote shutter release cable.
LATITUDE: N 48d 38m 52.70s
LONGITUDE: W 123d 23m 36.67s
ALTITUDE: 2.0m
RAW (TIFF) FILE: 130.00MB NEF: 90.5MB
PROCESSED (JPeg) FILE: 28.50MB
PROCESSING POWER:
Nikon D850 Firmware versions C 1.10 (9/05/2019) LD Distortion Data 2.017 (20/3/18) LF 1.00
HP 110-352na Desktop PC with AMD Quad-Core A6-5200 APU 64Bit processor. Radeon HD8400 graphics. 8 GB DDR3 Memory with 1TB Data storage. 64-bit Windows 10. Verbatim USB 2.0 1TB desktop hard drive. WD My Passport Ultra 1tb USB3 Portable hard drive. Nikon ViewNX-1 64bit (Version 1.3.1 11/07/2019). Nikon Capture NX-D 64bit (Version 1.4.7 15/03/2018). Nikon Picture Control Utility 2 (Version 1.3.2 15/03/2018). Adobe photoshop Elements 8 Version 8.0 64bit.
Encapsulated in its payload fairing, NASA's Parker Solar Probe has been mated to a United Launch Alliance Delta IV Heavy rocket at Cape Canaveral Air Force Station's Space Launch Complex 37 on Tuesday, July 31, 2018. The Parker Solar Probe is being prepared for a mission to perform the closest-ever observations of a star when it travels through the Sun's atmosphere, called the corona. The probe will rely on measurements and imaging to revolutionize our understanding of the corona and the Sun-Earth connection.
Photo credit: NASA/Leif Heimbold
twitter.com/KeltruckLtd/status/997118897332539392
#Scania #DriverTraining on the #ACServicesBanbury P450 #tipper in grsroadstone.co.uk livery.
"Definite improvement in #MPG & driver feedback is all positive."
#ACServices #Banbury #Oxfordshire #Oxon #OX15 #ScaniaTippers #payload #uptime #SaveOnFuel #ScaniaDriverTraining
#SuppliedByKeltruck keltruckscania.com/suppliedbykeltruck
This type of vehicle was used to inject a variety of (mainly military) payloads into orbit and as an intermediate-stage booster for space probes. It was launched aboard Thor or Atlas-D launch vehicles which were then known as Thor-Agena and Atlas-Agena. A total of 75 Agena-Bs were launched, the first October 1960 and the last in June 1966.
With longer propellant tanks than the -A model, the 6.3m-long, 1.5m diameter -B was powered by a Bell 8081 engine, which provided 71 kN of thrust, with a burn time of 240 seconds. The gimballed liquid-fuel engine could be restarted in orbit.
Satellite programmes supported by Agena-B included the military's SAMOS-E and SAMOS-F, together with MIDAS. The covert Corona photo-reconnaissance satellites, flying under the covername Discoverer were also flown aboard Agena-Bs. Scientific research OGO and Nimbus satellites were also launched aboard Agena-Bs. Space probes included Ranger vehicles going to the Moon and Mariner planetary probes to Mars, Venus and Mercury.
The above example was donated by the US Air Force to the Smithsonian Institution in 1965. I saw it in the Rockets and Missiles section of the Space Hangar in the National Air & Space Museum's Udvar-Hazy Center in Chantilly, VA.
By the looks of the payload, I’m pretty sure this is STS-2.
(Which btw is WRONG. See the informed & astute observations by Mr. Ed Hengeveld below.)
Gorgeous artwork that was used as the basis for depicting at least three different shuttle missions, to include STS-3, for which a variant was featured on the cover of the March 1982 Rockwell International “Press Information” booklet for the flight.
Being of Rockwell International origin, possibly by Manuel Alvarez? Henry Lozano? Bert Winthrop? Somebody else?
See more photos of this, and the Wikipedia article.
Details, quoting from Smithsonian National Air and Space Museum | Space Shuttle Enterprise:
Manufacturer:
Rockwell International Corporation
Country of Origin:
United States of America
Dimensions:
Overall: 57 ft. tall x 122 ft. long x 78 ft. wing span, 150,000 lb.
(1737.36 x 3718.57 x 2377.44cm, 68039.6kg)
Materials:
Aluminum airframe and body with some fiberglass features; payload bay doors are graphite epoxy composite; thermal tiles are simulated (polyurethane foam) except for test samples of actual tiles and thermal blankets.
The first Space Shuttle orbiter, "Enterprise," is a full-scale test vehicle used for flights in the atmosphere and tests on the ground; it is not equipped for spaceflight. Although the airframe and flight control elements are like those of the Shuttles flown in space, this vehicle has no propulsion system and only simulated thermal tiles because these features were not needed for atmospheric and ground tests. "Enterprise" was rolled out at Rockwell International's assembly facility in Palmdale, California, in 1976. In 1977, it entered service for a nine-month-long approach-and-landing test flight program. Thereafter it was used for vibration tests and fit checks at NASA centers, and it also appeared in the 1983 Paris Air Show and the 1984 World's Fair in New Orleans. In 1985, NASA transferred "Enterprise" to the Smithsonian Institution's National Air and Space Museum.
Transferred from National Aeronautics and Space Administration
• • •
Quoting from Wikipedia | Space Shuttle Enterprise:
The Space Shuttle Enterprise (NASA Orbiter Vehicle Designation: OV-101) was the first Space Shuttle orbiter. It was built for NASA as part of the Space Shuttle program to perform test flights in the atmosphere. It was constructed without engines or a functional heat shield, and was therefore not capable of spaceflight.
Originally, Enterprise had been intended to be refitted for orbital flight, which would have made it the second space shuttle to fly after Columbia. However, during the construction of Columbia, details of the final design changed, particularly with regard to the weight of the fuselage and wings. Refitting Enterprise for spaceflight would have involved dismantling the orbiter and returning the sections to subcontractors across the country. As this was an expensive proposition, it was determined to be less costly to build Challenger around a body frame (STA-099) that had been created as a test article. Similarly, Enterprise was considered for refit to replace Challenger after the latter was destroyed, but Endeavour was built from structural spares instead.
Service
Construction began on the first orbiter on June 4, 1974. Designated OV-101, it was originally planned to be named Constitution and unveiled on Constitution Day, September 17, 1976. A write-in campaign by Trekkies to President Gerald Ford asked that the orbiter be named after the Starship Enterprise, featured on the television show Star Trek. Although Ford did not mention the campaign, the president—who during World War II had served on the aircraft carrier USS Monterey (CVL-26) that served with USS Enterprise (CV-6)—said that he was "partial to the name" and overrode NASA officials.
The design of OV-101 was not the same as that planned for OV-102, the first flight model; the tail was constructed differently, and it did not have the interfaces to mount OMS pods. A large number of subsystems—ranging from main engines to radar equipment—were not installed on this vehicle, but the capacity to add them in the future was retained. Instead of a thermal protection system, its surface was primarily fiberglass.
In mid-1976, the orbiter was used for ground vibration tests, allowing engineers to compare data from an actual flight vehicle with theoretical models.
On September 17, 1976, Enterprise was rolled out of Rockwell's plant at Palmdale, California. In recognition of its fictional namesake, Star Trek creator Gene Roddenberry and most of the principal cast of the original series of Star Trek were on hand at the dedication ceremony.
Approach and landing tests (ALT)
Main article: Approach and Landing Tests
On January 31, 1977, it was taken by road to Dryden Flight Research Center at Edwards Air Force Base, to begin operational testing.
While at NASA Dryden, Enterprise was used by NASA for a variety of ground and flight tests intended to validate aspects of the shuttle program. The initial nine-month testing period was referred to by the acronym ALT, for "Approach and Landing Test". These tests included a maiden "flight" on February 18, 1977 atop a Boeing 747 Shuttle Carrier Aircraft (SCA) to measure structural loads and ground handling and braking characteristics of the mated system. Ground tests of all orbiter subsystems were carried out to verify functionality prior to atmospheric flight.
The mated Enterprise/SCA combination was then subjected to five test flights with Enterprise unmanned and unactivated. The purpose of these test flights was to measure the flight characteristics of the mated combination. These tests were followed with three test flights with Enterprise manned to test the shuttle flight control systems.
Enterprise underwent five free flights where the craft separated from the SCA and was landed under astronaut control. These tests verified the flight characteristics of the orbiter design and were carried out under several aerodynamic and weight configurations. On the fifth and final glider flight, pilot-induced oscillation problems were revealed, which had to be addressed before the first orbital launch occurred.
On August 12, 1977, the space shuttle Enterprise flew on its own for the first time.
Preparation for STS-1
Following the ALT program, Enterprise was ferried among several NASA facilities to configure the craft for vibration testing. In June 1979, it was mated with an external tank and solid rocket boosters (known as a boilerplate configuration) and tested in a launch configuration at Kennedy Space Center Launch Pad 39A.
Retirement
With the completion of critical testing, Enterprise was partially disassembled to allow certain components to be reused in other shuttles, then underwent an international tour visiting France, Germany, Italy, the United Kingdom, Canada, and the U.S. states of California, Alabama, and Louisiana (during the 1984 Louisiana World Exposition). It was also used to fit-check the never-used shuttle launch pad at Vandenberg AFB, California. Finally, on November 18, 1985, Enterprise was ferried to Washington, D.C., where it became property of the Smithsonian Institution.
Post-Challenger
After the Challenger disaster, NASA considered using Enterprise as a replacement. However refitting the shuttle with all of the necessary equipment needed for it to be used in space was considered, but instead it was decided to use spares constructed at the same time as Discovery and Atlantis to build Endeavour.
Post-Columbia
In 2003, after the breakup of Columbia during re-entry, the Columbia Accident Investigation Board conducted tests at Southwest Research Institute, which used an air gun to shoot foam blocks of similar size, mass and speed to that which struck Columbia at a test structure which mechanically replicated the orbiter wing leading edge. They removed a fiberglass panel from Enterprise's wing to perform analysis of the material and attached it to the test structure, then shot a foam block at it. While the panel was not broken as a result of the test, the impact was enough to permanently deform a seal. As the reinforced carbon-carbon (RCC) panel on Columbia was 2.5 times weaker, this suggested that the RCC leading edge would have been shattered. Additional tests on the fiberglass were canceled in order not to risk damaging the test apparatus, and a panel from Discovery was tested to determine the effects of the foam on a similarly-aged RCC leading edge. On July 7, 2003, a foam impact test created a hole 41 cm by 42.5 cm (16.1 inches by 16.7 inches) in the protective RCC panel. The tests clearly demonstrated that a foam impact of the type Columbia sustained could seriously breach the protective RCC panels on the wing leading edge.
The board determined that the probable cause of the accident was that the foam impact caused a breach of a reinforced carbon-carbon panel along the leading edge of Columbia's left wing, allowing hot gases generated during re-entry to enter the wing and cause structural collapse. This caused Columbia to spin out of control, breaking up with the loss of the entire crew.
Museum exhibit
Enterprise was stored at the Smithsonian's hangar at Washington Dulles International Airport before it was restored and moved to the newly built Smithsonian's National Air and Space Museum's Steven F. Udvar-Hazy Center at Dulles International Airport, where it has been the centerpiece of the space collection. On April 12, 2011, NASA announced that Space Shuttle Discovery, the most traveled orbiter in the fleet, will be added to the collection once the Shuttle fleet is retired. When that happens, Enterprise will be moved to the Intrepid Sea-Air-Space Museum in New York City, to a newly constructed hangar adjacent to the museum. In preparation for the anticipated relocation, engineers evaluated the vehicle in early 2010 and determined that it was safe to fly on the Shuttle Carrier Aircraft once again.
Engineers perform mass properties testing on the rocket-powered descent stage of NASA’s Mars Perseverance rover at Kennedy Space Center on April 12, 2020. The testing to determine the center of gravity, or the point at which weight is evenly dispersed on all sides, was performed inside the Florida spaceport’s Payload Hazardous Servicing Facility. The descent stage will lower the rover through the thin Martian atmosphere and onto the surface on Feb. 18, 2021. Liftoff, aboard a United Launch Alliance Atlas V 541 rocket, is targeted between July 17 and Aug. 5 from Cape Canaveral Air Force Station. NASA’s Launch Services Program based at Kennedy is managing the launch. The rover will seek signs of ancient life and collect rock and soil samples for possible return to Earth. Photo credit: NASA/Jet Propulsion Laboratory
Technicians encapsulate NASA's Landsat Data Continuity Mission (LDCM) satellite in its payload fairing in the Astrotech processing facility at Vandenberg Air Force Base in California.
The Landsat Data Continuity Mission (LDCM) is NASA's eighth satellite in the Landsat series and continues the Landsat program's critical role in monitoring, understanding and managing the resources needed for human sustainment such as food, water and forests. As our population surpasses seven billion people, the impact of human society on the planet will increase, and Landsat monitors those impacts as well as environmental changes.
Image credit: NASA/VAFB
NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission.
Follow us on Twitter
Like us on Facebook
Find us on Instagram
"Final Payload: Marine Major Donn C. Beatty, left, and his radar intercept officer Captain John D. Cummings, right, check the ordnance of their Phantom jet with Lieutenant Joseph O. Thornton, standing, ordnance officer, and his noncommissioned officer in charge, Gunnery Sergeant Richard S. Brown. Piloting the Marine Fighter Attack Squadron 122 [VMFA-122] aircraft last week Beatty delivered the squadron’s 10,000th ton of ordnance against the enemy since the Tigers arrived in Vietnam last September (official USMC photo by Master Sergeant Golden Pace)."
From the Jonathan Abel Collection (COLL/3611), Marine Corps Archives & Special Collections.
OFFICIAL USMC PHOTOGRAPH
NASA has selected three commercial Moon landing service providers that will deliver science and technology payloads under Commercial Lunar Payload Services (CLPS) as part of the Artemis program. Each commercial lander will carry NASA-provided payloads that will conduct science investigations and demonstrate advanced technologies on the lunar surface, paving the way for NASA astronauts to land on the lunar surface by 2024.
The selections are:
• Astrobotic of Pittsburgh has been awarded $79.5 million and has proposed to fly as many as 14 payloads to Lacus Mortis, a large crater on the near side of the Moon, by July 2021.
• Intuitive Machines of Houston has been awarded $77 million. The company has proposed to fly as many as five payloads to Oceanus Procellarum, a scientifically intriguing dark spot on the Moon, by July 2021.
• Orbit Beyond of Edison, New Jersey, has been awarded $97 million and has proposed to fly as many as four payloads to Mare Imbrium, a lava plain in one of the Moon’s craters, by September 2020.
This commercial lander from Intuitive Machines of Houston will carry NASA-provided science and technology payloads to the lunar surface, paving the way for NASA astronauts to land on the Moon by 2024.
All three of the lander models were on display for the announcement of the companies selected to provide the first lunar landers for the Artemis program, on Friday, May 31, 2019, at NASA's Goddard Space Flight Center in Greenbelt, Md.
Read more: go.nasa.gov/2Ki2mJo
Credit: NASA/Goddard/Rebecca Roth
In the SpaceX Payload Processing Facility at Vandenberg Air Force Base in California, the payload fairing containing the Jason-3 satellite has been rotated to horizontal in preparation for mating to a SpaceX Falcon 9 rocket at Vandenberg's Space Launch Complex 4. Built by Thales Alenia of France, Jason-3 will measure the topography of the ocean surface for a four-agency international partnership consisting of NOAA, NASA, Centre National d’Etudes Spatiales, France’s space agency, and the European Organization for the Exploitation of Meteorological Satellites.
Photo credit: NASA/Thiep Nguyen and Christopher Wiant
Payload Specialist Rodolfo Neri, representing Mexico on the STS-61B space mission aboard the Atlantis, prepares to begin one of the experiments for Mexico. Neri used a nearby 35mm camera to record plants and bacteria for various prescribed testing. Here the payload specialist has opened a stowage drawer to retrieve components of one of the tests.
Credit: NASA
Image Number: 61B-05-021
Date: November 26, 1985
Astronaut Butch Wilmore is seen here on computer screens in the Payload Operations Integration Center at NASA's Marshall Space Flight Center preparing for installation of the first 3-D printer in space, happening today on the International Space Station. Technicians, engineers and scientists in the Payload Operations Integration Center help astronauts onboard the #ISS with experiments and science -- including experiments that will take place with the 3-D printer -- 24-hours a day, 7-days a week, 365-days a year. 3-D printing could help astronauts on future missions to deep space make tools and equipments they will need to sustain long missions.
At Launch Pad 39A at NASA's Kennedy Space Center in Florida, the canister containing the payload for space shuttle Endeavour’s STS-127 mission is prepared for its lift into the Payload Changeout Room above.
May 22, 2009
Having disposed of its payload of stone, 66502 'Basford Hall Centenary 2001' has reversed the empties back here, and awaits its booked path back south.
6M67 12.27 Hitchin - Wembley
All images on this site are exclusive property and may not be copied, downloaded, reproduced, transmitted, manipulated or used in any way without expressed written permission of the photographer. All rights reserved – Copyright Paul Townsend
In this long exposure image, members of NASA's Nancy Grace Roman Space Telescope process the observatory on Thursday, July 16, 2026, inside the Payload Hazardous Servicing Facility at NASA's Kennedy Space Center in Florida. Roman's primary mission is to settle essential questions about dark energy, exoplanets, and infrared astrophysics by conducting wide-field surveys that explore the universe's structure, evolution, and composition. Liftoff atop a SpaceX Falcon Heavy rocket from NASA Kennedy's Launch Complex 39A is targeted no earlier than Sunday, Aug. 30, 2026. Photo credit: NASA/Sydney Rohde (Rocz)
NASA image use policy.
NASA has selected three commercial Moon landing service providers that will deliver science and technology payloads under Commercial Lunar Payload Services (CLPS) as part of the Artemis program. Each commercial lander will carry NASA-provided payloads that will conduct science investigations and demonstrate advanced technologies on the lunar surface, paving the way for NASA astronauts to land on the lunar surface by 2024.
The selections are:
• Astrobotic of Pittsburgh has been awarded $79.5 million and has proposed to fly as many as 14 payloads to Lacus Mortis, a large crater on the near side of the Moon, by July 2021.
• Intuitive Machines of Houston has been awarded $77 million. The company has proposed to fly as many as five payloads to Oceanus Procellarum, a scientifically intriguing dark spot on the Moon, by July 2021.
• Orbit Beyond of Edison, New Jersey, has been awarded $97 million and has proposed to fly as many as four payloads to Mare Imbrium, a lava plain in one of the Moon’s craters, by September 2020.
This commercial lander from Astrobotic of Pittsburgh will carry NASA-provided science and technology payloads to the lunar surface, paving the way for NASA astronauts to land on the Moon by 2024.
All three of the lander models were on display for the announcement of the companies selected to provide the first lunar landers for the Artemis program, on Friday, May 31, 2019, at NASA's Goddard Space Flight Center in Greenbelt, Md.
Read more: go.nasa.gov/2Ki2mJo
Credit: NASA/Goddard/Rebecca Roth
Selected after a worldwide competition, the new name of ESA’s recently refitted Compact Payload Test Range is Hertz – which stands for ‘Hybrid European RF antenna Test Zone’.
Announcing it, the new name is shone onto the reflectors normally used to change the shape of the signals from test antennas, as if they originated from far away across space.
A new name was sought after the redesigned facility – used to test large space antennas at ESA’s Technology Centre in Noordwijk, the Netherlands – gained the ability to perform both ‘far-field’ and ‘near-field’ signal measurements, thanks to the addition of a versatile Near-Field Scanner.
More than 240 suggestions were received from around Europe and the world, from both inside the space industry and the general public.
The winning suggestion came from someone who works with the new Hertz chamber on a regular basis: ESA antenna engineer Luca Salghetti Drioli, seen right.
“Hertz is the unit of frequency, of course, used all the time within the chamber,” explains Luca. “This unit is named in turn for pioneering physicist Heinrich Hertz.
“ESTEC already has a chamber named after James Clark Maxwell, who came up with the theory of electromagnetic waves, so it seemed right to honour the man whose name is associated with the fundamental unit of frequency.
“And taking the name Hertz we can include the word ‘Hybrid’ in the acronym. The refitted chamber’s ability to support two measurement types is a first for Europe.”
NASA has selected three commercial Moon landing service providers that will deliver science and technology payloads under Commercial Lunar Payload Services (CLPS) as part of the Artemis program. Each commercial lander will carry NASA-provided payloads that will conduct science investigations and demonstrate advanced technologies on the lunar surface, paving the way for NASA astronauts to land on the lunar surface by 2024.
The selections are:
• Astrobotic of Pittsburgh has been awarded $79.5 million and has proposed to fly as many as 14 payloads to Lacus Mortis, a large crater on the near side of the Moon, by July 2021.
• Intuitive Machines of Houston has been awarded $77 million. The company has proposed to fly as many as five payloads to Oceanus Procellarum, a scientifically intriguing dark spot on the Moon, by July 2021.
• Orbit Beyond of Edison, New Jersey, has been awarded $97 million and has proposed to fly as many as four payloads to Mare Imbrium, a lava plain in one of the Moon’s craters, by September 2020.
All three of the lander models were on display for the announcement of the companies selected to provide the first lunar landers for the Artemis program, on Friday, May 31, 2019, at NASA's Goddard Space Flight Center in Greenbelt, Md.
Read more: go.nasa.gov/2Ki2mJo
Credit: NASA/Goddard/Rebecca Roth
The Space Shuttle Atlantis (Orbiter Vehicle Designation: OV‑104) was a Space Shuttle orbiter belonging to the National Aeronautics and Space Administration (NASA), the spaceflight and space exploration agency of the United States
Atlantis embarked on its 33rd and final mission, also the final mission of a space shuttle, STS-135, on 8 July 2011. STS-134 by Endeavour was expected to be the final flight before STS-135 was authorized in October 2010. STS-135 took advantage of the processing for the STS-335 Launch On Need mission that would have been necessary if STS-134's crew became stranded in orbit. Atlantis landed for the final time at the Kennedy Space Center on 21 July 2011.
By the end of its final mission, Atlantis had orbited the Earth a total of 4,848 times, traveling nearly 126,000,000 mi (203,000,000 km) or more than 525 times the distance from the Earth to the Moon.
Atlantis is currently displayed at the Kennedy Space Center Visitor Complex and is suspended with its payload bay doors opened such that it appears to be back in orbit around the Earth.
VANDENBERG AIR FORCE BASE, Calif. – At Vandenberg Air Force Base's Space Launch Complex-2 in California, technicians monitor the movement of a section of the clamshell-shaped Delta payload fairing as it encloses NASA’s National Polar-orbiting Operational Environmental Satellite System Preparatory Project (NPP) spacecraft. The fairing will protect the spacecraft from the impact of aerodynamic pressure and heating during ascent and will be jettisoned once the spacecraft is outside the Earth's atmosphere. NPP represents a critical first step in building the next-generation of Earth-observing satellites. NPP will carry the first of the new sensors developed for this satellite fleet, now known as the Joint Polar Satellite System (JPSS) to be launched in 2016. NPP is the bridge between NASA's Earth Observing System (EOS) satellites and the forthcoming series of JPSS satellites. The mission will test key technologies and instruments for the JPSS missions. NPP is targeted to launch Oct. 28 from Space Launch Complex-2 aboard a United Launch Alliance Delta II rocket.
For more information, visit www.nasa.gov/NPP.
Photo credit: NASA/Mark P. Mackley, VAFB
NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission.
Follow us on Twitter
Like us on Facebook
Find us on Instagram