View allAll Photos Tagged Leveler
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
This Boat is currently for sale for $1.2Million or best offer
Date and Time: 3/16/2024 at 8:07 pm EDT
Location: Washington D.C.
Gear: Seestar S50 "smart telescope" with a Cavix LP-64 camera leveler interposed between the Seestar and a tripod.
(Seestar S50 is a 50 mm f/5, i.e., 250 mm focal length, apochromatic triplet telescope with a built-in camera based on a Sony IMX462 sensor.)
Processing details:
(a) In Lightroom Classic, I cropped to a square aspect.
(b) Created a mask. Selected Subject ("powered by AI") and applied a "pop" preset.
(c) Created a second mask and applied the following settings to the subject: Highlights = -10; Color settings: Temperature = 16, Tint = 5; Effects settings: Clarity = 5, Dehaze = 5.
** A further edit was made as indicated below. **
(d) Noticing a residual blue color cast, I created a third mask and after selecting subject I went to Calibration (under the Basic Panel) and applied the following settings under Blue Primary: Hue = +48, Saturation = -48. Exported the result as a high-quality JPG image.
This JPG image exhibits structural features some of which are not readily seen in the stacked (within the Seestar app itself) image also shown in my album. Cf. the "Remarks" section in the description in my stacked image result.
ABN 78010687671
Rogers Little Loaders have mini loaders / mini diggers for hire with a variety of attachments perfect for all jobs big and small. The Kanga series 6 out performs all machines in its class, providing more power, torque, speed, and has the highest ground clearance for rough terrain.
Rogers Little Loaders is the trusted name in the trade industry and for domestic mini loader work. Rogers Little Loaders specialise in domestic landscaping work, limited access earth moving, turf and concrete slab preparation, post hole digging, trenching, levelling and whatever else your heart desires
Unlike other companies, Rogers little loaders hire hydraulic tilt trailers perfect to utilise for tip runs and waste disposal.
Rogers Little Loaders deliver to the entire Brisbane area and provide on-site training so you can operate the machine with ease or alternatively hire one of our professional operators.
Rogers Little Loaders operate 7 days a week and accept payments from Visa, Mastercard, Amex, Debit card, Direct debit and cash.
For more information call 0468 477 937
1 DIY Hire:
Get off the tools and on to a Kanga. DIY hire will save you countless time and effort, your back will thank you.
Prices start from $160 and get cheaper with longer hire.
Includes training which will enable you to operate the loader with ease.
We have a variety of attachments to complete all you domestic projects or renovations.
2 Hire an Expert:
Sit back and let our drivers do the hard work.
We have hundreds of hours experience on machines big and small working on mining projects to multiple home earthwork renovations. Our professionalism and operating precision will ensure the task is completed fast and effectively.
Wet hire rates include machinery, all attachments and tilt trailer used by the operator.
3 Machinery Specs
The Kanga's innovative design makes it perfect for domestic earth works. Being only 1050mm wide enables easy access through small openings to your desired location.
The Kanga also has the greatest ground clearance compared to it's competitors of 185mm perfect for rough terrain.
For full specifications ..
Read more takes to Attachment and Uses page.
- DIY, No Licenses Required.
- Tipper Trailer.
- Pickup or Delivery Anywhere In Brisbane
- From As Low As $160.
Mini Loader Hire Brisbane
ABN 78010687671
Rogers Little Loaders
Call: 0468 477 937
Email: info@rogerslittleloaders.com
Address: 1A Church Street North, Redbank 4301, QLD, Australia
Tags: Excavator, Landscaping, Lawn, Earthmoving, Excavation, Brisbane, Earthmoving Brisbane, Excavation Brisbane, loader dry hire, Kanga, KangaSeries6, standard bucket, Standard Bucket, Auger, Auger Attachment, Trencher, Leveler, Trailer, Hydraulic Tilt Trailer, Hire, Rental, Hiring, Australia, Brisbane, Qld, Construction, RogerslittleLoaders, Rogers, Little, Loaders, Machinery, Types of machinery, Queensland, mini digger Hire, mini loader hire, +mini +digger +hire, mini like dingo hire, +mini like dingo +hire, +mini +loader +hire, [mini like dingo hire], mini kanga hire, +mini +kanga +hire, Mini Digger Loader, Loaders Diggers Like Dingo, Alternative of Dingo Kanga, Hire Brisbane Qld Australia, Hire Brisbane Mini Loader, Hire Brisbane Mini Digger, Hire Brisbane Mini Like Dingo, Hire Brisbane Small Digger
Hashtags: #Brisbane #Excavation #Earthmoving #BrisbaneExcavation #BrisbaneEarthmoving #loaderdryhire Kanga #KangaSeries6 #StandardBucket #Bucket #Auger #Attachment #Trencher #Leveler #Trailer #HydraulicTiltTrailer #MiniLoader #Hire #Rental #Rent #Hiring #Australia #Brisbane #Qld #Construction #RogersLittleLoaders #Rogers #Little #Loaders #Machinery #Machineries #LoadersDiggersLikeDingo #MiniDiggerLoader #MiniKangaHire #AlternativeofDingoKanga #HireBrisbaneQld #HireBrisbaneMiniLoader #HireBrisbaneMiniLikeDingo #HireBrisbaneSmallDigger #AugerAttachment #TrencherLevelerTrailer #HydraulicTiltTrailerHire #ConstructionEquipment #Equipments
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
This Boat is currently for sale.
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
This Boat is currently for sale.
Masonic Working Tools:
In each of the Degrees of Freemasonry, certain implements of the Operative Art are consecrated to the Speculative Science, and adopted to teach as symbols lessons of morality. With these the Speculative Freemason is taught to erect his spiritual Temple, as his Operative predecessors with the same implements so constructed their material Temples. Thus they are known as Working Tools of the Degree. They vary but very slightly in the various Rites, but the same symbolism is preserved. The principal Working-Tools of the Operative Art that have been adopted as symbols in the Speculative Science, confined, however, to Ancient Craft Masonry, and not used in the higher Degrees, are the Twenty-four-inch Gage, Common Gavel, Square, Level, Plumb, Skirret, Compasses, Pencil, Trowel, Mallet, Pickax, Crow, and Shovel.
On the Level:
The Level is a tool used in construction.
Just about every Mason hears the phrase ―On the Level
when they attend their Lodge meeting. It is one of most basic ideas put forth in Freemasonry.
At it‘s core on the level indicates that an object is the same distance from a common surface no matter where you measure from.
This is critical in construction to make sure that a house or structure
will stand. That the floors do not slope and things will not roll or slide across the floor. Generally in construction when something is level, it has more to do with the ground
on which it stands and gravity as a whole.
In Freemasonry a level not only refers to things that are of equal distance from a common surface, it refers to many other things.
The first thing it refers to is what the phrase most commonly translates to outside of the fraternity. When someone is ―on the level‖ they are honest, they deal with someone fairly. This also can have another allusion most commonly held with one of the Cardinal Virtues of Freemasonry: Justice. The balance scale, that is a common symbol to indicate Justice, has a level as it‘s core element.
With both sides being equal, a balance scale will be level across indicating that both sides are equal.
The second thing, is that it is a reminder that we are all equal in the eyes of death,
often referred to in Masonry as the ―Great Leveler.‖ It means that death comes for us all, no matter what station we have attained in life, no matter what we attained as status
in the fraternity, we will all look upon the face of death. It is a reminder for all of us
that we are no different from the person walking beside us on the street or standing
next to us in our lodge room.
Third and most importantly, it is a reminder to Freemasons that, no matter what we do inside the fraternity, no matter what position we hold or have held, we have
a responsibility to our brothers and to the world to treat each others as equals.
No one person is more important than another in the fraternity, even when someone
briefly achieves the position of Most Worshipful Grand Master, the highest position
and leader in any Grand Jurisdiction.
All must be held to the same standards and all must be treated as equals.
It is for all these reasons that most Lodges will end their meeting
with everyone standing on the same surface. It symbolizes that we are all standing together equally and no one, no matter their position, is exempted from standing shoulder
to shoulder with their Brethren.
One of the best examples of on the level comes from an Installation Ceremony. Bob McBride. MSPub / DDGM / Peterborough District‟s Electronic Beacon / 2020-12-01, Volume Fourteen, Issue 04
In it is stated, ―From the ranks you have risen and to the ranks you shall return.‖
It is a reminder that some of us may be called to lead from time to time, Page 56 but we must always remember that we are still ―on the level‖ with our Brethren.
Source: www.masonrytoday.com/index.php?new_month=6&new_day=4&....
HDR/Stereographic Projection that I made from a pano taken between the Marriott and the Big Harbor in San Diego. 90 pictures were used to make this image.
I am really angry at myself because I left my ISO at 640 for this instead of 100. There is a little bit of noise because of it so I'm going to probably go back and reshot it soon.
Even still I really liked the pano so I ended up making 3 projections from it.
This was my first outing with my new Nodal Ninja MK3 and Manfrotto 055xPROB tripod legs and I am loving them. A $500 tripod is so much better than the $45 tripod I had been using. Now all I need is Nodal Ninja's EZ Leveler 2 and I'm all set.
remnants of the car ferries that moved train cars too large for the old Port Huron - Sarnia tunnel. This is classic marine timber construction.
Shweta Chari, an Electronics Engineer and the founder / CEO of Toybank had a vision of reaching out to children through fun and play using toys. The journey began on August 15th, 2004. A small idea that started in a small restaurant in
Bombay has over the years gathered momentum with the help and support of friends and volunteers from all corners of Bombay. Within a shortest span of time and very minimal resources, Toybank is bringing smiles on thousands of
deprived faces. Toybank acts as a leveler of the society by taking toys from those that can give and distributing them to the ones in need. In a way Toybank attempts to prove the belief of John.F.Kennedy, ‘If the free society cannot help the many that are poor, it can never save the few who are rich.’
Toybank honestly dreams to place a toy in the hands of every poor child of India and the world. The toy shapes the psyche of the children, so utmost care is taken to give only unbiased and morally correct toys to children. Toybank does not take Barbie dolls; toy guns; violent toys or any other toy that discriminates.
As through the years, toys were collected, segregated and gift-wrapped and then gifted on a one-on-one basis to the kids from all over Bombay, Shweta soon realized that the beneficiaries of toys were impacted much beyond her
expectation. The children began to recognize that play was one of their core rights. They also began expressing themselves better and were more in tune with their lives and circumstances. Shweta felt the need to expand and reach out to many more children in India. With the help of volunteers Toybank also started monitoring the children that were impacted through the Toybank activities. The events became more intense with more focus given to value education to the children while during the toy distributions.
Toybank now also runs in Bangalore, Pune and Delhi with the support from core Toybankers Vinay, Bharath, Surendra and Swetha.
Shweta is a go-getter. She is a self-driven individual and is passionate about everything she does in her life. She handles Toybank’s core strategies, ideates on new concepts to expand Toybank. She also goes full throttle into raising toys and
funds for Toybank.
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
This Boat is currently for sale for $1.2Million or best offer
Multiblanking cutting line able to cut 5 blanks at the same time. Coils up to 36 ton in widths up to 2000 mm and thickness up to 2.5 mm. The maximum length of the blanks is 6000 mm. Leveller with automatic change of cartridges, multiblanking electromagnetic stacker, slitter and rotary shear
LÃnea de corte multiformato capaz de cortar 5 tiras simultánemanente. Bobinas de 36 ton con ancho de banda de 2000 mm y espesor de 2,5 mm. Longitud de los formatos de hasta 6000 mm. Aplanadora con cambio automático de casette, apilador electromagnético multiformato, cizalla circular y cizalla rotativa.
Laser land leveling at IRRI
Part of the image collection of the International Rice Research Institute (IRRI).
Masonic Working Tools:
In each of the Degrees of Freemasonry, certain implements of the Operative Art are consecrated to the Speculative Science, and adopted to teach as symbols lessons of morality. With these the Speculative Freemason is taught to erect his spiritual Temple, as his Operative predecessors with the same implements so constructed their material Temples. Thus they are known as Working Tools of the Degree. They vary but very slightly in the various Rites, but the same symbolism is preserved. The principal Working-Tools of the Operative Art that have been adopted as symbols in the Speculative Science, confined, however, to Ancient Craft Masonry, and not used in the higher Degrees, are the Twenty-four-inch Gage, Common Gavel, Square, Level, Plumb, Skirret, Compasses, Pencil, Trowel, Mallet, Pickax, Crow, and Shovel.
The following poem, written by Mary Brooks Picken, entitled, "Thimblefuls of Friendliness" was written in 1924, and, perhaps says it, best.
"Thimblefuls of Friendliness"
"Isn't it strange that Princes and Kings
And clowns that caper in sawdust rings,
And just plain folks like you and me,
Are builders for Eternity?
To each is given a bag of tools,
A shapeless mass and a book of rules,
And each must make ere life is flown,
A stumbling block, or a stepping stone.
So,...it's up to you. What will YOU decide to build with YOUR working tools?
On the Level:
The Level is a tool used in construction.
Just about every Mason hears the phrase ― On the Level
when they attend their Lodge meeting. It is one of most basic ideas put forth in Freemasonry.
At it‘s core on the level indicates that an object is the same distance from a common surface no matter where you measure from.
This is critical in construction to make sure that a house or structure
will stand. That the floors do not slope and things will not roll or slide across the floor. Generally in construction when something is level, it has more to do with the ground
on which it stands and gravity as a whole.
In Freemasonry a level not only refers to things that are of equal distance from a common surface, it refers to many other things.
The first thing it refers to is what the phrase most commonly translates to outside of the fraternity. When someone is ―on the level‖ they are honest, they deal with someone fairly. This also can have another allusion most commonly held with one of the Cardinal Virtues of Freemasonry: Justice. The balance scale, that is a common symbol to indicate Justice, has a level as it‘s core element.
With both sides being equal, a balance scale will be level across indicating that both sides are equal.
The second thing, is that it is a reminder that we are all equal in the eyes of death,
often referred to in Masonry as the ―Great Leveler.‖ It means that death comes for us all, no matter what station we have attained in life, no matter what we attained as status
in the fraternity, we will all look upon the face of death. It is a reminder for all of us
that we are no different from the person walking beside us on the street or standing
next to us in our lodge room.
Third and most importantly, it is a reminder to Freemasons that, no matter what we do inside the fraternity, no matter what position we hold or have held, we have
a responsibility to our brothers and to the world to treat each others as equals.
No one person is more important than another in the fraternity, even when someone
briefly achieves the position of Most Worshipful Grand Master, the highest position
and leader in any Grand Jurisdiction.
All must be held to the same standards and all must be treated as equals.
It is for all these reasons that most Lodges will end their meeting
with everyone standing on the same surface. It symbolizes that we are all standing together equally and no one, no matter their position, is exempted from standing shoulder
to shoulder with their Brethren.
One of the best examples of on the level comes from an Installation Ceremony. Bob McBride. MSPub / DDGM / Peterborough District‟s Electronic Beacon / 2020-12-01, Volume Fourteen, Issue 04
In it is stated, ―From the ranks you have risen and to the ranks you shall return.‖
It is a reminder that some of us may be called to lead from time to time, Page 56 but we must always remember that we are still ―on the level‖ with our Brethren.
Source: www.masonrytoday.com/index.php?new_month=6&new_day=4&....
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
This Boat is currently for sale for $1.2Million or best offer
For parts inquiries and press manuals contact NA Graphics:
www.nagraph.com/storefront.html
For Vandercook press related discussion visit the Vanderblog:
vandercookpress.info/vanderblog/
For historical and model information visit Paul Moxon's site:
Gerald Lange's Tips & Tricks:
Excellent quality mold and plastic injection facility. Facility is one story brick and concrete block containing 96,000 square feet. Office area is 11,466 square feet. Mold finishing area is 18,600 square feet. Plastic injection area is 14,934 square feet. Warehouse area is 51,000 square feet. Mold finishing area is climate controlled and has two 3-ton bridge cranes. Facility has a 1,000 KVA transformer, two 1,600 amps/277/480 volts and 3 phase electrical service with bus ducts in the shop area. Shipping and receiving area has three 8' X 10' dock doors each weather seal and leveler and four 10' X 12' drive in doors.
Facility is in overall good condition with the rubber membrane roof replaced over the past year.
Property is located in Tipp City, Ohio with good access to I-75 via County Road 25-A and State Route 571. Located within a ten minute drive from Dayton International Airport.
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
37' Riva 2000 1979 (Completely Rebuilt in 2009)
Boat Name: ULTIMATE
Original Model Year: 1979
Currently Located in Stuart, FL
Hull Material: Fiberglass
Fuel Type: Gas
YW# 1817-2005182
Number of Engines: 3
Tank Capacity: 300 gal
Tank Material: Aluminum
Dimensions
LOA: 37'
Beam: 9'3"
Displacement: 11800
Draft: 3'5"
Engines
Engine(s): (3) Mercruiser
Engine(s) HP: 425
Engine Model: MCM 496 MAG HO
Hours: 8
Max Speed: 70+
Paint
New Awlgrip Paint
Teflon coating on the bottom of the boat
Custom Stainless Steel Exhaust/Boat Leveler Trim Tabs
Stainless Steel Bow Rails
Custom Stainless Steel Exhaust
Boat Leveler Trim Tabs
Custom Props and Rudders
International VC Teflon Bottom Paint
2008 Mercruiser 425 hp MCM496 MAG HO
Accommodations
V-bunk
Enclosed head with toilet and sink
Deck Equipment
Stainless steel bow rails
(4) Cleats
(3) Chocks
(2) Rod holders
Deck hatches
Electronic and Navigational Equipment
Northstar 6100I Chart Plotter/Sounder
Boat Leveler trim tabs with automatic trim
Custom Parts
Stainless steel struts, propellers, rudders, shaft diameter increased with splines
Tides Marine shaft seals and rudder seals
Awlgrip paint on exterior
International VC Teflon bottom paint
Penske board fiberglassed into structural interior areas
Stainless steel exhausts and mufflers
New fuel tank (300 gal) aluminum
BEP electric battery selector switches w/parallel system
Engine/Mechanical Equipment
Triple Mercruiser 425 hp. each MCM496 MAG HO
New fuel tank (300 gal) aluminum
Tide Marine shaft seals
Stainless steel exhausts and mufflers
BEP electric battery selector switches with parallel system
This is an extremely rare boat that has been completely and perfectly restored to like new condition. No expense has been spared and no attention has been overlooked to make this boat a one of a kind. Truly a rare jewel. All custom props, rudders and running gear. 3 new Mercury Mercruiser engines and state of the art electronics. Top of the line paint as well as Teflon coating on the bottom of the boat.
The boat is available to be inspected by appointment to serious buyers. The seller is the owner of the boat.
Please use the eBay contact link in order to setup an appointment to see the boat or if you have any questions. All questions and requests will be answered within one business day.
Additional photos can be emailed if needed.
Thank you for your interest.
This Boat is currently for sale for $1.2Million or best offer
How to fit an element in the right position with a minimum of efforts. Azimuth, VTA, best error angle and a leveler.
The glories of our blood and state
Are shadows, not substantial things;
There is no armour against Fate;
Death lays his icy hand on kings:
Sceptre and Crown
Must tumble down,
And in the dust be equal made
With the poor crookèd scythe and spade.
("Death the Leveler," James Shirley, 1596–1666)
A Jim Crow memorial plaque, County Courthouse, Edgefield, SC. The 1919 dedication reads: "Erected by the Edgefield Daughters of the American Revolution in Memory of the Men From Edgefield County Who Gave Their Lives in the War With Germany."
Cut-to-length line to process high strength steel. Coils of 40 ton, with strip's width of 2150 mm and maximum thickness of 25 mm. Blank's length up to 12 meters. Levellers with automatic change of cartridges, flying shear with knive change, bomb door stacker, edge trimming, scrap chopper and full computerized monitoring
LÃnea de corte transversal para procesar acero. Bobinas de hasta 40 toneladas, con ancho de banda de 2150 mm y espesor máximo de 25 mm. Longitud de formato de hasta 12 metros. Aplanadora con cambio de casette, cizalla volante con cambio de cuchillas mecanizado, apilador bomb door, corte de bordes con troceadora de chatarra y control integral por ordenador.
Bayside CG, waterfront (narrow 50' path bordered by poison ivy leading to silty shore - pretty but no good for boats or swimming), easy back in to right, large, 4" side-to-side slope (too much for Anderson levelers). Rating: H
The existing floor was a glazed ceramic tile. Profiling and specialty primers were necessary before the leveler was installed. Mike and Brian are shown working fast over the 900 square foot 1st level area.
Servo blanking line for steel and aluminum up to 3 mm in thickness, 2100 mm in width, 800 ton servopress, blanks up to 4000 mm in length, speed of 120 m/min and vacuum stacker. Leveller with automatic change of cartridge and swinging die.
LÃnea de corte con prensa, servo blanking line, para acero y aluminio de hasta 3 mm de espesor, ancho de 2100 mm, servoprensa de 800 ton, formato de 4000 mm de largo, 120 m/min de velocidad y apilador de vacÃo. Aplanadora con cambio de casette y troquel oscilante.
Cut-to-length line to process high strength steel. Coils of 40 ton, with strip's width of 2100 mm and maximum thickness of 21 mm. Blank's length up to 20 meters. Three levellers with automatic change of cartridges, straightener with cartridge change, flying shear with knive change, bomb door stacker, scale brushing and removing devices, edge trimming, scrap chopper and full computerized monitoring
LÃnea de corte transversal para procesar acero de muy alto lÃmite elástico. Bobinas de hasta 40 toneladas, con ancho de banda de 2100 mm y espesor máximo de 21 mm. Longitud de formato de hasta 20 metros.Tres aplanadoras con cambio de casette, enderezadora con cambio de casette, cizalla volante con cambio de cuchillas mecanizado, apilador bomb door, cepilladoras y extractoras de calamina, corte de bordes con troceadora de chatarra y control integral por ordenador.
Poster included with the VIP package for the Fall 2012 North American Headline Tour with Of Mice & Men, The Color Morale, and The Overseer. Autographed by the whole band and crew. 11x17" poster.
Acquisition details
Date: September 7th, 2012
Vendor: JB
Notes: JB graciously mailed this to me since I couldn't attend the tour because he considered me a die-hard fan.
August Burns Red | Leveler [European Edition] | June 20th, 2011 | Hassle Records | HOFF128CDB | CD
Acquisition details
Date: September 7th, 2012
Vendor: Kip/JB
Price paid: $0
Notes: This was part of a package JB sent me.
Hydraulics of a laser leveler
Part of the image collection of the International Rice Research Institute (IRRI).
Michal Cole and Ekin Onat
Absent Presence, 2017
Mixed media installation
In this collaboration and most reflective in the exhibition, life-size models of Cole and Onat are found on the bed, as if just awoken. Staged within the bedroom, a place of intimacy and privacy, the artists consider the bed the most charged item in the home, as universal leveler it has the same use for kings and for peasants.
Cut-to-length line to process high strength steel. Coils of 36 ton, with strip's width of 1800 mm and maximum thickness of 12.7 mm. Blank's length up to 12 meters. Two levellers with automatic change of cartridges, flying shear with knive change, bonb door stacker, scale brushing and removing devices, edge trimming, scrap chopper and full computerized monitoring
LÃnea de corte transversal para procesar acero de muy alto lÃmite elástico. Bobinas de hasta 36 toneladas, con ancho de banda de 1800 mm y espesor máximo de 12,7 mm. Longitud de formato de hasta 12 metros.Dos aplanadoras con cambio de casette, cizalla volante con cambio de cuchillas mecanizado, apilador bomb door, cepilladoras y extractoras de calamina, corte de bordes con troceadora de chatarra y control integral por ordenador.
Cut-to-length line to process high strength steel. Coils of 40 ton, with strip's width of 2150 mm and maximum thickness of 15 mm. Blank's length up to 16 meters. Two levellers with automatic change of cartridges, One stretch leveller, flying shear with knive change, bonb door stacker, scale brushing and removing devices, edge trimming, scrap chopper and full computerized monitoring
LÃnea de corte transversal para procesar acero de muy alto lÃmite elástico. Bobinas de hasta 40 toneladas, con ancho de banda de 2150 mm y espesor máximo de 15 mm. Longitud de formato de hasta 16 metros.Dos aplanadoras con cambio de casette, una aplanadora stretch leveller, cizalla volante con cambio de cuchillas mecanizado, apilador bomb door, cepilladoras y extractoras de calamina, corte de bordes con troceadora de chatarra y control integral por ordenador.
Laser transmitter used in laser land leveling
Part of the image collection of the International Rice Research Institute (IRRI).