View allAll Photos Tagged Howto
sammenligner metode til at røre dej til hvedeboller, samme mel, gær, vand, surdej og hævetid i køleskab. Kun forskellig metode: 1) uden røremaskine, ælte et par gange i løbet af nogle timer versus 2) normal hurtig 5-10 minutter æltning med røremaskine.
raaberg.blogspot.dk/2012/08/fantastisk-grydebrd-utrolig-n...
Use two screws to attach the support plank to the horizontal plank, starting with the left support and then going to the right support, before working on the next horizontal plank down.
Be sure to make sure that each plank is even with the previous one as you move downwards. You may need a second pair of hands and some strength to hold slightly warped boards even.
New script turns addresses into geodata ready to be mapped with TileMill. More details and instructions on how to do this at XXX
This shot is one in a series about engraving stones and tiles using a sandblaster.
Full description of the sandblasting process here: buildmakecraftbake.com/2009/03/how-to-tuesday-sandblastin...
sammenligner metode til at røre dej til hvedeboller, samme mel, gær, vand, surdej og hævetid i køleskab. Kun forskellig metode: 1) uden røremaskine, ælte et par gange i løbet af nogle timer versus 2) normal hurtig 5-10 minutter æltning med røremaskine.
Enable your new feathers by selecting them from the Feathers menu. Since your feathers are copied from the default Rubberducky, you won't notice anything different until you change something.
A backcountry "how-to" video on how to build the ultimate backcountry drink. This was filmed at Horseshoe Mesa in Grand Canyon National Park.
This turned out to be a super camera.
I bought it on ebay cheap with a broken battery door.
The velcro I used to fix the battery door makes a fine grip
and I actually like it better than the z2 we have that's mint.
No adjustments just a crop and re size in post.
www.flickr.com/photos/florida_sail_ham/sets/7215762490628...
sammenligner metode til at røre dej til hvedeboller, samme mel, gær, vand, surdej og hævetid i køleskab. Kun forskellig metode: 1) uden røremaskine, ælte et par gange i løbet af nogle timer versus 2) normal hurtig 5-10 minutter æltning med røremaskine.
Welcome to your new sandbox. These files are used to paint the appearance of your Songbird. They are basically a copy of Rubberducky for you to modify as much, or as little, as you'd like.
Use your Black nail pen to draw diagonal lines on the first finger and the pinky. Still using the same black pen draw vertical stripes on the red nail and then do a bow [two triangles connected] on the thumb with three dots below it.
Use a gold glitter pen to draw two lines in-between the black stripes on the first finger and pinky finger.
Take your red nail pen to draw dots on the middle finger.
No adjustments just a crop and re size in post.
www.flickr.com/photos/florida_sail_ham/sets/7215762490628...
after clicking install you should see the message this item will be installed after you restart firefox
Now to read:
The mark that tells you what the actual measurement is the long line on the bottom left (I've marked it with a red arrow). Then look up to the center part of the gauge and find a corresponding number. Some gauges are more accurate than others (depends on how they were calibrated). This might make measurements between gauges differ by .1mm or more.
Here it looks like it is almost on the 16mm mark/line. Depending on how accurate or annoying I want to be I can call this eye 16mm (what it was sold as) or I can get into a finner measurement.
Since the measuring line between the 15 and 16mm (or 1.5cm and 1.6cm) marks I know that it will be under 16mm and over 15mm. I also know that the measurement should be more than 15.5mm since it's so close to the 16mm line. This type of estimation is usefull as it allows me to double check further numbers.
The other lines/marks that follow the red arrowed line, the measuring line, show me the decimal place. They are 0.1mm increments.
To find which one, I look for the 0.1mm line (on the red arrow side) that matches up perfectly (or as close as possible) to a line with the numbers (in the center piece of the gauge). DO NOT LOOK AT THOSE NUMBERS IN THE CENTER. You only need the lines.
The line that matches up closely are the two lines that I've underlined in blue. Personally I think the 8th one is the best, but this can be up to some debate (between 8 and 9). These lines on the red arrow side tell you the 0.1mm increment of measurement, so count the lines (there are ten, with the .5mm mark being the center line that is not as short as the others. Its longer but not as long as the red arrow line.) and that tells you what the measurement is to the tenth decimal place.
So the measurement of this eye is 15.8mm in diameter or 16mm as eyes are usually sold in increments of 2mm.
If you wanted to read the inch size (why???) just look at the one mark on that size and find the closest measurement mark. Here it would be approximately 5/8inches. Again this is not as accurate. Look at all the spaces between the marks on the inch side.
We all make mistakes, but SRAM mechanic Sara Jarrell says she frequently meets cyclists who make the same common errors when it comes to bike set up and maintenance. She has wrenched for World Cup racers, led skills clinics for riders of all abilities and taught beginner classes, so she’s ex...
This can take many tries, as pushing a small needle through 3 inches of foam, batting, and fabric is not exact. Try not to put too many holes in your front fabric! Once you get the needle to push through into the drilled hole, you should pull it out, using the needle nose pliers if necessary.
Materials:
- One half yard of fabric is enough to make one small and one large box with the above dimensions,
- 1.25yd Featherweight Fusible Interfacing to make 2 small + 2 large boxes,
- Thread to match fabric,
- Sewing machine,
- Scissors, iron, ironing board
Original instructions from Design*Sponge: Sewing 101: Tissue Box Cover by Brett Bara (it's a really solid tutorial!).