Repeat steps 7-12, making as many hexagons as you need for your project.

I decided to use peg board as the platform's surface. I will not be using a box spring with this mattress, so it is very important that air circulates underneath. Didn't like the idea of drilling a bazillion holes in plywood, or cutting a bunch of slats, so went this route.

Screw removed!

Replace the gear that was nearest the wires.

This is a mini steamer for the microwave that I picked up at Daiso. It's sold as a steamer for meat buns, but it's just the right size for steaming small amounts of vegetables or dumplings for lunch -- speeds up cook time 50%. You put a tablespoon of water in the bottom, replace the steam tray on the bottom, put the veggies in, then cover (aligning the steam holes to allow venting). Nuke for 1-2 minutes and let it stand for a couple of minutes afterward to steam. It can also be used for storage if you twist the lid so that the steam release holes are not aligned. Blog entry here at Lunch in a Box.

I decided to use peg board as the platform's surface. I will not be using a box spring with this mattress, so it is very important that air circulates underneath. Didn't like the idea of drilling a bazillion holes in plywood, or cutting a bunch of slats, so went this route.

Slide eggs into water

In-camera HDR image (2 frames, set at 3EV Exposure Differential, ISO 6400, handheld) with Nikon D600 full frame dSLR camera and kit lens 24-85mm f/3.5-4.5G ED VR.

Continue repeating steps 9 & 10, until the hexagon is complete. You can remove the pin at this point, but not the paper!

Materials: Assorted fabrics (I used calicos, osnaburg, and a linen mix), (Fabric+Paper) Scissors , (Contrasting+Matching) Thread, Needle, Pins, Pencil, Ruler, Scrap Printer Paper, and hexagon template on card stock (or plastic).

Remove all four long screws.

UPDATED! I had to update my popular comic How to Create a QR Code in 3 Easy Steps because I have new fav ways to make them using Goo.gl and QR Code Monkey!! Enjoy!

Read the blog post: www.thedaringlibrarian.com/2011/10/how-to-create-qr-code-...

Creative Commons - Take, Use, Share!

Fold the fabric along the next edge of the hexagon, be careful not to bend the paper hexagon.

All that's left is to sleep on it. :)

Lay it flat with the screws pointing up.

Replace the central gear.

The BristleBot is a vibrobot with an agenda.

It's built with a vibrating pager motor and the busines end of a toothbrush that has slanted bristles.

With the matching thread and needle, sew the edge of the two hexagons together. Be careful to only go through the fabric, and not the paper!

Remove all four long screws.

Unscrew the horn.

Replace the ring that was on the gear nearest the wires.

With the matching thread and needle, sew the edge of the two hexagons together. Be careful to only go through the fabric, and not the paper!

Once you decide how you'd like to lay out your fabric hexagons, plac ethe right side of two neighboring hexagons together, with their edges matching.

Another angle. Frames have been centered with each other, and toetacked into place with wood screws.

How-to here at my blog.