View allAll Photos Tagged updates
So here we is what’s going so far I am placed more bricklink orders for a small battle of Sicily moc that’s why I built the PAK 38 and I am going to work on a ww2 winter vinegette so ya.Also I can’t keep building little willie because I am to lazy to work on a big tank so if you guys can give me ideas on small tanks I can build pls
I uploaded this and added a huge description regarding my absence and an update on Boomer's condition only to return and find that the image didn't upload...thus nor did the description. I can't say it is Flickr's fault as I used the old uploader and had an electrical surge due to storms so something may have happened that Flickr had no control over.
Long story short, I'm back, Boomer is able to bear a little weight on her hind quarters and I think I like the new Flickr if I can figure it out.
Mahala.
Meanwhile the cheetah cubs are progressing nicely. They have no choice. Time does that for them. After a certain amount of, erm, time, time will do it to you instead of for you.
(2 Photos.)
Slink Physique MALE Mesh Body V2.02
Slink Physique Mesh Body Hourglass V2.02
Slink Physique Mesh Body Original V3.02
HUDがガラっと変わってた。
そして、恐れていたレイヤーのUVの位置がずれていた、、、、orz
なので、、テクスチャーがずれます。すみません。。 (つд⊂)
slinkに限らずですがmesh bodyはアプデのたび微妙にUVがずれるのです。
ちょと今回のズレがでかい。。あーーー＞＜
でもHUDはいいかも。
ベレーザと同じ感じになりました。
アルファの区切りが適度になり
消しやすくなった。
やっとメンズもアプデきましたね！
SLはどうしてもメンズがおいてけぼりだからなぁ。
もすこし種類がほしいところです。
久々にHourglassを装着しましたが
ほんまむちむちやね！これw
むちむちのギリギリラインをねらったシェイプでもこねるかなw
Women is sitting in front of the centre pompidou in paris and is checking the notification on her smartphone.
Mainly just updated the wheels after www.flickr.com/photos/thomas_reincke/ bought the space shuttle wheels to my attention which look far better.
The gent is Dalmar Merrick, haughty high elf but overall decent necromancer, and the lady is my trustworthy two-handed nord Brunhilde Bonebreaker, who's all about ass-kicking and exploring ancient tombs. I've had these two followers forever and they're based on my closest peeps.
I took this picture over a week ago, and i am only now getting around to uploading it. the only real change is the piece i used for a seat. if anyone wants additional views, just let me know.
UPDATE – Oct. 14th
I know it’s been a LONG time since I’ve posted something on here, and I know people have been asking for updates (rightly so) – so I figured I’d provide some in a simple post here.
Two things must be made clear first – 1) my printer, who I’ve worked with forever and who produces the best prints of any printer I’ve worked with, has become very successful this past year and as such is trying to catch up with the growth of their business. As such, their times to process orders has more than tripled since the beginning of the year. This has caused many of the prints and test prints, etc. to be delayed by more than 2 months each. So things are slower to get printed now than ever before. 2) we are very close to getting our setup exactly as we need it with the injection mold company that we work with so that our parts are to the exact specifications and quality that we want, and that you expect. The injection molding process, and learning what is needed to create good parts, has been a huge learning process for us. The good news is that after months and months of working and tweaking things, we are very close to having our first parts (for Night Crusader and Original Super Soldier – and 1 surprise figure) ready to send to the printer.
With that being said, here’s some updates on some figs coming soon…
Homemade Arachnid Hero
Our first update will be for all those who ordered the Homemade Arachnid Hero. We are anticipating that this figure will be sent out to our presales customers and resellers the last weekend of October (2 weeks from now) and will go on sale on the website a week or two after that. We will try to post pictures as soon as he arrives.
Night Crusader
The test prints for the Night Crusader have been finalized and approved and we are all ready to go to print it. I usually don’t share pictures of the figures before they are completed, but since you all have been waiting so patiently for this figure, I thought I’d bend at least one rule to make you feel confident in your upcoming fig). However, we are awaiting the injection molded parts to arrive, so that we can align the head print exactly with the cowl part (we want to make sure his eyes are aligned correctly in those hole). We received the most recent samples from the mold and we still need to make a couple of final adjustments, so that it is to the exact quality that I know we all expect from the top customizers. He should be completed before Black Friday (week of Thanksgiving), if everything goes to plan. I will post an update if that is any sooner.
Original Super Soldier
The custom helmet part is being completed at the same time as the Night Crusader cowl, as they share the same mold, and as such is facing many of the same needs for updated changes. However, we are still also processing the prints still for this figure. The hope is that this will be available a couple weeks after Night Crusader is released.
Surprise New Figure
Along with the Original Super Soldier, we will be releasing a third, not yet published custom figure that will include 1 custom headpiece and a printed accessory. I think you guys should be very happy and surprised by this guy – can’t wait to show you! When the part is completed and we send him in for printing, we’ll provide a render of him to let you know what’s coming!
That’s all for now. I would first and foremost like to thank you all for your unwavering patience and kind understanding while I bring Phoenix Customs to a new era of custom figs. However, this kind of growth is not without hiccups and challenges, that is for sure. What IS for sure, is that we are not going to be bringing about products that can’t compete with the best out there. We will NOT sacrifice quality. We want to bring our figures to the next evolution, where unique custom parts and top quality printing go hand-in-hand. We can’t wait to bring these pre-ordered figs to life in the next couple months and to show you what we have in store for the coming months of the new year! So many good figs that I can’t wait to release!!
Take care!
Adam
i hope you like it! inspirations tagged, and YES i know the wheels are DBG and they will be changed.
Hi everyone!
Sorry for the lack of updates recently, but we've been really busy for the past months, specially because I've moved to a new house!
We expect that we will be 100% back by September, but for now here's a small site update for you (link in my profile)!
We hope you like it!
------
¡Hola a todos!
Sentimos la falta de actualizaciones últimamente, pero hemos estado muy ocupadas estos últimos meses, sobre todo porque me he mudado de piso!
Creemos que para septiembre estaremos de vuelta al 100%, pero de momento aquí tenéis una pequeña actualización de la web (link en mi perfil)!
Esperamos que os guste!
Follow us on:
Kharis called me up and asked me to shoot an updated shot of her in the same pose I shot her in 2 years ago. A lot has changed, but she's still awesome!
i updated the front so that the're no gaps and i made the back so it becomes smaller in the back, i also placed the machine guns higher
An updated group of figs from the Borderlands series that I brought to BFVA '19, except for the new additions of the Calypso Twins from the upcoming BL3. I meant to make these two while at the con, but I never had the time/inspiration. But here they are now!
via KrakyLand.net NARUTO SHIPPUDEN UNS 4 Update v20160219 Download Pc www.krakyland.net/2016/02/naruto-shippuden-uns-4-update-v...
I had planned an update for tomorrow but many people have asked for news and then the vet visit, originally scheduled for tomorrow, was preponed to today. So here is the new update.
Ramses had a couple of difficult days. He was extremely lethargic, didn't want to eat on his own. We were worried and took him to the clinic for a check-up but they couldn't find anything except a wound on his tongue. Apparently he had bitten his tongue quite badly. We continued with the normal medication and fed him with a syringe. Additionally I tried some homeopathic medication recommended by a friend. In the meantime he is more active again and his appetite seems to return too. The suture on his eye hasn't been removed yet as due to the haematoma behind the eye the area is still swollen and they are afraid the eye might simply drop out as a result of the pressure. When they had a look at him today they were quite pleased with the healing process, though. Antibiotics are no longer required and the pain killers will slowly be reduced. Of course he still doesn't look like the Ramses in this photo but it's getting better. His next check-up at the clinic is on Thursday.
Sethi and Cleo still avoid him completely. Fynn isn't allowed to meet him at the moment as Fynn is a constant source of bacteria due to his chronic cat flu. Linus hasn't seen Ramses either as he and Ramses are not particularly close and as Linus would most likely react like Sethi and panic.
New photo of my Lego minifigure collection. I made the two display frames that they are on. The collection has a few missing spots for minifigures that are being shipped to me now for the most part. I still need to make a frame for all my big-figs though
Just some updates to characters and a new one.
L to R:
Shazam: I used the flash torso before but that's on jay garrick now, so i had to improvise, i think it actually works very very well. White hood and cape, SW clone head, Backwards LBM robin torso.
Anarky: went for a classic look, it looks nice. CMF Red hood, Red cape, Backwards BBT torso, and CMF head
Green Arrow: I've been rewatching Arrow Season 1, and i wanted to make my arrow more like the one in the show. Dr Doom hood, GA head and torso
Okay guys, I know I haven't posted in a while, but I have my reasons. (Long story, though). For now, here's this: a shot from my stop-motion.
So far, out of six scenes, I have four done. I *think* that I have made some serious progress, having started in September. I think that I may be ready before my initial planned date (January).
In this scene, the Jedi has broken free of his cell, and a guard arrives to see what all of the commotion was. It would be the last thing he sees.......
Go-Ahead London 948 (YN07EXG) on route 127 at Tooting Broadway on 15/08/2018
Normally used on route 405, these vehicles are part of the only batch of Scania N230UD/East Lancs OmniDekkas delivered for TfL work.
The 127 formerly used similar buses but with N94UD (Euro III) chassis but these left the fleet a couple years ago to renew and standardise the fleet. 948 is seen at the first stop at Tooting Broadway en route to Purley via Carshalton.
These are also likely to go in the not too distant future, as a similar fate has befallen the Optare Olympus examples at Orpington garage.
© Omid Mossavat
Take my word for it, Peanut has beautiful yellow eyes! She just hates the flash from the camera. Maybe, I'll be able to get some photos of her outside while I'm weeding.....
Peanut says Hi Laura!!! Love and kisses to you and yours!!!!
Updated shot of my custom X-Men, now I just need Vic to reprint Beast and Kyle to do his Jean Grey and I'll be set.
Winter Update 20260125
Google Pixel 10 Pro XL
Rain then snow then ice.
Shots from inside since it's too cold to go out!
Big Update at bricksforkids, the Brickarms newest release are already available !
Added to brickarms surplus packs, Balken Kreuz tiles available individually, big discount on the overmolds, time to place an order while it last (until june 30th for some offers !)
Hey guys. Sorry for the lack of activity, it's 50% being busy, and 50% laziness. Don't get me wrong, I'm still here checking Flickr multiple times daily. But today I left for vacation! And while in most cases this would mean yet another week of inactivity, all the riding in the car will give me some time to reflect and write. So for the next week I have a new issue of Vortex to upload, that will reveal many important things for the story arc to come. Also a quick competition entry! But here's a question. Would you guys like to see another week where I post a character bio daily? Or should I wait longer to reveal them? This time they would be villains though.
So about this picture. ITS NOT CANON. Alot of super hero teams have an older version of themselves, like a team in the 80's that eventually failed. That is not the. case with mine. or at least not this specific group here. When I first joined Flickr this is the group I had planned. But I came in hotheaded and it ended up being a terrible mess full of last minute decisions and changes. I updated some of them compared to when I first made them. Some I scrapped, some of them stayed, some were changed.
L to R:
Trident - I think he was like the prince of Atlantis or something. He was a, good guy but really impatient. He was gonna eventually turn evil. Might use him in the future, probably not though.
Mr. Jekyll - Im pretty sure the original was green and had red hair, but I threw this guy together. I actually really liked him, but then I got the idea for Guerrilla and one thing led to another, then he was replaced. Still got plans for him.
Titanic - Still using him. Really hasn't changed.
Iron Lady - Squeem basically owns the character now. I honestly forgot I made her until they made one like her using the HulkBuster, asking for name ideas. Wouldn't even have noticed if Andhe hadn't reminded me. I would have thrown together the original but I was about to leave, will probably post a picture of it when I get back.
Vortex - Yep totally scrapped this guy never gonna make a series for him ever. Nope.
Beast? Mammal? Wulf? -I honestly can't remember what his name was. He could grow the body parts or attributes of any mammal. i.e. Horns, bat wings, sharp teeth. Still gonna use him.
Talon - Ended up making some backstory changes. Original design never changed.
So here is my original plans for the team. Be expecting a Vortex issue sometime in the next few days, Im planning on uploading more frequently before school starts too.
Winter Update 20260125
Google Pixel 10 Pro XL
Rain then snow then ice.
Shots from inside since it's too cold to go out!
is idk if this is rly a update XD but you prolly noticed I HAVEN'T POSTED IN A WEEK!!!!!!! >_< UGH so I rly haven't drawn anything all week coz I got a lot on meh plate! and I'll prolly post more soon! PS this is just a rly random drawing I did in like 5 secs XDDDD
Man, I finally got around to posting this...lol.
I found the Lego Bionicle Lord Of Skull Spiders (a discontinued set) at this store while on vacation about a month back, so I decided to pick it up because I wasn't able to buy it when it was originally out. And I also made a Lego.Com order about two weeks ago consisting of the Lego Marvel Tanker Truck Takedown and Doctor Strange's Sanctum Sanctorum, along with the Lego Star Wars Encounter on Jakku set. All of them are fantastic sets!
Speaking of Bionicle, it's a shame it has ended once again, but I think we all knew it wouldn't last that long due to it being weak in story and lore compared to Generation 1 and it not having very good sales. Anyway, my summer has been pretty uneventful and I've been kind of depressed lately, but otherwise, everything is good I guess. My birthday was on Saturday, but I didn't even care so I didn't post a picture or anything. I've been cutting grass all summer saving up for some of those Lego Rogue One sets once they come out September 30th and I'm also saving for a PS4. Hoping to get that by Christmas time, along with a few games for it. I hope you're all having a good Labor Day unlike me. This is my last day of summer and I start school tomorrow and I'm dreading it. But yeah, guys. That's pretty much all for now! Take care.
Bought a $20 creator set just to get that spear tip to calm Slight's mind. Changed her actual head to catwoman's as well
Alias: Amethyst Stalker
Name: Heather Sefton
Gender: Female
Allegiance: Villain
Backstory: Years ago, during the fight between Archon and some villains at Gateway Labs, Heather's parents got caught in the crossfire, resulting in them both dying. Blaming specials for the death of her parents, she grew up hating everyone of them. Friends of her parents took her in, so that she would have somewhere to live. Walking in her parents footsteps, she would start working at Gateway Labs after high-school. Amassing varying tech devices and training over the years, she would use this in her quest to kill every special she could.
Powers: None, but has many different gadgets/weapons that she uses to take down specials. Her primary weapon is a spear, which the bladed end, can detach like a harpoon gun of sorts with a press of a button.
Status: Alive, and at large. May potentially be working for Division?
Sooo, a small update.
Finally I had a viable idea to shorten the arms of the grabber, so in the next step it made sense trying to cut down the length of the mechanics.
The loader itself is easily made three instead of four studs wide, another half stud was won by using only a flat cogwheel instead of a whole, so now the whole thingy is two studs shorter, and better in proportions.
The rear axle could go another stud to the front, making weight distribution more plausible.
Rummaging through my boxes I found a 32291 connector piece in dark grey, replacing the blue (only visible when the tipper unit is active).
Addition to Toy Project Day 2330