View allAll Photos Tagged modular
The facade of this hospital is modelled after Ullevål Universitetssykehus, which is a hospital in Oslo, Norway.
Made for the Modular Madness contest on Eurobricks.
A couple of weeks ago, I got my hands on a 1592 Town Square set (Dutch version). I had to restore it a little, and then I got the idea to make a building for my modular street inspired by this set. So this is the result. A corner house, built in the middle ages, the last in its sort, next to the last remaining part of the city walls. Maybe it was the house of the gatekeeper. Today the space behind the gate isn't used as road any more, but houses a little snack corner, where you can eat 'soep en worst' (as in the original 1983 set).
Next to another modular MOC it looks very small, but that is to be expected from a little mediaeval house.
I haven't yet remade the statue and the parade from set 1592.
Building guide available on www.brickmonster.toys
Following the standards commonly used for LEGO® modular buildings, the Police Station is a modular building in a 32-stud-wide format with 4 distinct sections.
- Ground Floor featuring payphones, a large desk, waiting area, and holding cell.
- Main Floor featuring the many desks of the precinct's detectives, file storage, a bathroom and a caged armory.
- Top Floor featuring the chief's office, an evidence room, and crime lab.
- Roof featuring communication equipment and the station's air conditioner.
MOC: Modular LEGO Store. Based on the LEGO Brand Retail Store set that has been used as a giveaway at store openings over the past couple of years, but blown up to minifig scale.
And yes, I know that the original set isn't a corner building, but I just hadn't built one yet and needed one for a layout I was working on :)
Modular origami star
Designer: Natalia Romanenko (?)
Units: 5
Paper: square 5 cm (Peter Keller's paper, colour scheme "Eisvogel", at etsy-shop)
Final size: ~ 7 cm
Joint: no glue
Keep it tuned to WLGO! The best tunes and the best bricks!
It's my first custom modular, finally photographed!
A couple of weeks ago, I got my hands on a 1592 Town Square set (Dutch version). I had to restore it a little, and then I got the idea to make a building for my modular street inspired by this set. So this is the result. A corner house, built in the middle ages, the last in its sort, next to the last remaining part of the city walls. Maybe it was the house of the gatekeeper. Today the space behind the gate isn't used as road any more, but houses a little snack corner, where you can eat 'soep en worst' (as in the original 1983 set).
Next to another modular MOC it looks very small, but that is to be expected from a little mediaeval house.
I haven't yet remade the statue and the parade from set 1592.
60° Origami Modulars (Maria Sinayskaya)
rectangles (1:√3), 5 units, no glue
Simple but not very paper effective.
A modular school.
Building instruction is available at: rebrickable.com/users/peedeejay/mocs/
Every city needs a school! The build spans among 3 baseplates and consists of 10 modules. The baseplates can be separated from each other for easy transportation. The complete model weighs about 10kg and has 14417 parts.
The front part contains the main entrance, some trees and a bus stop. The roof areas contain the ventilation units, photovoltaics and the clock.
The ground floor contains the main entrance hall with washrooms for boys and girls. The right wing of the ground floor contains a standard classroom for maths and literature. The left wing of the ground floor contains the music classroom, featuring a piano, drums and some other instruments.
The middle floor contains a cafeteria, where the students can get a quick bite and some refreshments. The left wing of the middle floor contains an IT-classroom and it seems the students are well stocked on mobile devices. The right wing of the middle floor contains the science classroom. At the moment some experiments are ongoing in the chemistry class.
The upper floor contains the library.
LEGO modular post office.
6455 parts.
Building instruction is available at: rebrickable.com/users/peedeejay/mocs/
This was one of the most challenging facades I ever built, but I‘m quite happy how it turned out. Inside you can find also an architect‘s office. This gave me the chance to try some microscale building for the first time.
Tree technique by Ralf Langer.
Modular Origami Stars (Maria Sinayskaya)
squares, 6 units, no glue
Well, probably not my best folding - test versions)
A modular school.
Building instruction is available at: rebrickable.com/users/peedeejay/mocs/
Every city needs a school! The build spans among 3 baseplates and consists of 10 modules. The baseplates can be separated from each other for easy transportation. The complete model weighs about 10kg and has 14417 parts.
The front part contains the main entrance, some trees and a bus stop. The roof areas contain the ventilation units, photovoltaics and the clock.
The ground floor contains the main entrance hall with washrooms for boys and girls. The right wing of the ground floor contains a standard classroom for maths and literature. The left wing of the ground floor contains the music classroom, featuring a piano, drums and some other instruments.
The middle floor contains a cafeteria, where the students can get a quick bite and some refreshments. The left wing of the middle floor contains an IT-classroom and it seems the students are well stocked on mobile devices. The right wing of the middle floor contains the science classroom. At the moment some experiments are ongoing in the chemistry class.
The upper floor contains the library.
Paper: 15 cm
Modules: 4
Model: Tomoko Fuse
Book: Spiral: Origami | Art | Design p. 139-142
I wanted to redo this, as the paper for my first one was a bit too thick. Hence larger, thiner paper. Two sheets were a pink to violet and blue fading Harmony paper.
A modular school.
Building instruction is available at: rebrickable.com/users/peedeejay/mocs/
Every city needs a school! The build spans among 3 baseplates and consists of 10 modules. The baseplates can be separated from each other for easy transportation. The complete model weighs about 10kg and has 14417 parts.
The front part contains the main entrance, some trees and a bus stop. The roof areas contain the ventilation units, photovoltaics and the clock.
The ground floor contains the main entrance hall with washrooms for boys and girls. The right wing of the ground floor contains a standard classroom for maths and literature. The left wing of the ground floor contains the music classroom, featuring a piano, drums and some other instruments.
The middle floor contains a cafeteria, where the students can get a quick bite and some refreshments. The left wing of the middle floor contains an IT-classroom and it seems the students are well stocked on mobile devices. The right wing of the middle floor contains the science classroom. At the moment some experiments are ongoing in the chemistry class.
The upper floor contains the library.
My little town of modular Lego buildings now has a town hall and a town square. The hall is a remodelling of the mayor's mansion I built last year. I have combined it witthe the front porch of my now defunct market hall. There's a wedding taking place and the bride and groom are just comming down the stairs. In front of the town hall lies a little park with a hexangular fountain.
A little modular building or you.
A two-story book store, tool shop, studio apartment, and two-story condo. It comes in just over 3,000 pieces. And as with all modular, it has its own play story. I will be working to make instructions for Rebrickable.
A book store serves as the cover for two spies. They live above the book store in a studio-apartment. But is the tool store owner innocent in this crime?
Features include:
-Three separating floors (with roof)
-An open two-story books store
-Hidden rotating wall
-Sliding ladder
-Spiral stair case
-Multiple hidden compartments
-Working fire escape
-Murphy bed
LEGO modular post office.
6455 parts.
Building instruction is available at: rebrickable.com/users/peedeejay/mocs/
This was one of the most challenging facades I ever built, but I‘m quite happy how it turned out. Inside you can find also an architect‘s office. This gave me the chance to try some microscale building for the first time.
Tree technique by Ralf Langer.
A modular school.
Building instruction is available at: rebrickable.com/users/peedeejay/mocs/
Every city needs a school! The build spans among 3 baseplates and consists of 10 modules. The baseplates can be separated from each other for easy transportation. The complete model weighs about 10kg and has 14417 parts.
The front part contains the main entrance, some trees and a bus stop. The roof areas contain the ventilation units, photovoltaics and the clock.
The ground floor contains the main entrance hall with washrooms for boys and girls. The right wing of the ground floor contains a standard classroom for maths and literature. The left wing of the ground floor contains the music classroom, featuring a piano, drums and some other instruments.
The middle floor contains a cafeteria, where the students can get a quick bite and some refreshments. The left wing of the middle floor contains an IT-classroom and it seems the students are well stocked on mobile devices. The right wing of the middle floor contains the science classroom. At the moment some experiments are ongoing in the chemistry class.
The upper floor contains the library.