View allAll Photos Tagged electronics.
PS1306 - FIXED POWER SUPPLY 13.8V / 6A
protection mode: short-circuit protection
fuse-protected
housing: metal
colour: white-grey
output voltage: 13.8V fixed
output current: 6A (8A peak)
ripple voltage: 100mV
dimensions: 175 x 125 x 170mm
weight: 2.7kg
www.electronic-direct.be/product-details/ps1306/shop.htm?...
A liberlab board fitted in the shell of a faullty USB Hub. A thermistor is visible and now performs temperature monitoring in a servers room (and eventually sends alarms).
Electronics Mechanic John Herr performs a First Article Test on a receiver circuit card of an AN/TPS-63B Medium Range Surveillance Radar at Tobyhanna Army Depot. Herr works in the depot's Intelligence, Surveillance and Reconnaissance Directorate. Photo Credit: Steve Grzezdzinski
Three SSRs from the Reflow Oven project.
The large black SSR was originally going to switch all the power for the oven and is mounted to a large PII heatsink.
The two smaller SSRs (one in box and one out) will replace the larger SSR with one devoted to top and one for bottom.
All three SSRs are rated for 25A@240v, but the larger has a much higher surge current rating, has less recommended derating for inductive loads, and contains a zero-crossing detector. It also doesn't have the stylish "I'm on" LED.
The larger SSR is up for reuse now.
Velleman PMK 111 INTERVAL TIMER
Worker of PT Toshiba Consumer Products Ind. Assembling and manufacturing of electronic goods, such as television sets. Cikarang, Bekasi. Indonesia.
Country : Indonesia
Date : 2008
Copyright : Mirza A. / ILO
Here's the mostly-completed board, which actually seems to work (after a little jumpering to work around the fact that I made a single-sided board).
Next, I have to write the code which actually controls the lighting, and wire up the pushbutton switch I'm going to use for making changes to the colors and/or pattern.
Developing the photographic film
Related blog post: blog.gg8.se/wordpress/2008/12/19/pcb-manufacturing-at-my-...
we got our hands on a $100 laptop prototype (for the "one laptop per child" project). currently, it's just a motherboard that you plug a keyboard, monitor, and flash drive into.
Entex Electronics football game circa 1979. i had to clean out the batterys from the compartment and grind the acid from the battery conectors but it seems to be working apart from 1 led in the player 1 goal area.
bought for £1 from dene park carboot Hull UK on 10/05/2009.
Mixing electronics theory and knowledge of correct usage of electronic components, with their creative application
Futaba S3001 Indirect Drive Servo
Operating Voltage: 4.8-6.0 Volts
Operating Speed (4.8V): 0.23sec/60 degrees at no load
Operating Speed (6.0V): 0.19sec/60 degrees at no load
Stall Torque (4.8V): 44 oz/in. (3.2kg.cm)
Stall Torque (6.0V): 57 oz/in. (4.1kg.cm)
Potentiometer Drive: Indirect Drive
Bearing Type: Ball Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 12"
Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
Weight: 1.6oz. (45.1g)
This electronics workbench is a throwback to my days more than 50 years ago in the basement of my grandfather; where I began my Electronics Odyssey. Now finally in a ***house*** that feels like home for the first time I can spread my wings a bit.