View allAll Photos Tagged bracket
Original tool at far right has pin spanner pins rounded off and lock ring teeth rounded over. Hozan tool is nice and sharp. Park Pin Spanner does the trick for removal of the left hand threaded lock-nut/dust shield.
Remove screws labeled #1 first to remove the OBD-II plug, then screws labeled #2 to remove bracket, then remove cable end from bracket.
Polymer insulator brackets.. A glass 42 fits as it has 1" pin and know a polymer or other insulator with 1" pin hole goes on it..
Thank you Mr Nazeer Ummer for correcting me.
It is not mushroom, but 'Bracket Fungi' in the phylum Basidiomycota.
I found it on a log of old wood in Chinbrook meadow, London
I intended to photograph just the signal when I say it at a crossing in Knob Noster, Missouri but just as I started to take, I looked to the left and there was a train coming. Just moments later, I went ahead and snapped the three shots for an HDR with the train passing in the background. Additionally, when I processed the three RAW files with Photomatix, I did NOT check the option to remove ghosting in the combined image which resulted in the streaking train showing up in the background...just as I planned it!!
Three bracketed photos were taken and combined with Photomatix to create this HDR image. Additional adjustments were made in Photoshop CS5.
"For I know the plans I have for you,” declares the LORD, “plans to prosper you and not to harm you, plans to give you hope and a future." ~Jeremiah 29:11
The Blushing Bracket (Daedaleopsis confragosa) is a large, common bracket, the underside of which distinctively blushes reddish when bruised! Although it's common this is the first time I've knowingly seen it!
The slow growing, tough brackets are 8-22 cm wide and characterised by having a sharp edge. Fresh spore producing brackets are pale brown on the upper surface with zones of ochre and brown. The white to cream porous underside bruises pink when bruised or scratched, hence the common name. When old and no longer viable the brackets age to a striking red-brown colour, as in this image.
Blushing Brackets are found on dying and dead deciduous wood, particularly Willow and Birch, and can be seen all year round. They are common in England and Wales, with fewer records from Scotland.
Having seen this for the first time this year I am now falling over it all the time, it is a lovely fungi though.
Pennington Flash has had some good fungi coming up this year and it's still there if you look.
Be sure to download and complete your bracket for a chance to win some cool prizes! No previous participation in Lands of Roawia necessary. Just register an account on www.merlins-beard.com and join in the fun!
DOWNLOAD YOUR BRACKET HERE
Check out the LoR Brawl Tournament at the link below!
BRAWLING TOURNAMENT - BRACKET ROUNDS
Submit a screenshot of your completed bracket here:
Explored! #299 [October 16, 2007] Thanks!
Dismantled the bike over the weekend and took it to Assenmacher's for a repaint last night. In another month it's gonna look new. I'm sure I'll post more pix at that time.
Meantime, a few details: The frame was custom built by Matt Assenmacher in 1975 and has about 85,000 miles on it, 70K of them by 1986 when I finally bought a car. The Phil bottom bracket's been there since 1978. The crankset's a Stronglight 99; most of its parts date from 1975 but the left crank arm and small chainring are replacements. The bike was rebuilt with what eBay sellers call "New Old Stock" last spring, but I put the repaint off until winter because I wanted to get it on the road.
Weather permitting, I'll still hit the road this fall, and maybe even winter. Just on a different bike.
A "cold shoe" flash bracket engineered in our very own FPP Sudio!
Bracket mount will fit perfectly atop your folding Polaroid Land “pack” camera. The PC cord from the flash fits into the PC socket of your camera allowing the use of the Vivitar 252 or other electronic flashs (with a PC cord).
Image © Michael Raso / Film Photography Project
What is FPP?
The Film Photography Project seeks to inform, engage and inspire amateur and professional photographers working in the traditional film medium. Launched by FPP founder Michael Raso in 2009, FPP provides a forum for photographers from around the globe to share their creative output, challenges and product reviews, while promoting the viability of vintage cameras and film through frequent give-aways and exchange programs. In addition to the Film Photography Podcast Internet Radio Show, the Film Photography Project network of imprints includes the FPP Flickr Page, YouTube Channel, Facebook Group, Twitter Account, newsletter and the Film Photography Project Store.
Film Photography Pod Cast www.filmphotographypodcast.com/
This is a bad bracket because it has allowed the metal sheath of the cable to be pulled along with the cable, ensuring that there is no resistance on the other end of the cable to open the hood.
Gerry and Nathan at C & G Finishes did a beautiful job painting my frame. It's flamboyant red stove enamel with extra lacquer. It looks really deep and shiny in real life and it's amazing in the sunshine.
The chain stay bridge is tapped M5 for direct mounting of a mudguard and the bottom bracket shell has a drain hole next to the threaded cable guide mount just out of view.
Sonoma Raceway, October 2022
Camera: Rollei 35S
Film: Fuji 200
Developed/Scanned by a local shop, film sprockets cropped out in Lightroom
What is this bracket for? It looks like a rock climbing bolt. Is it a place for mechanics to clip in while working on the wings?
This bracket attaches to to the lower laser bracket and allows some vertical play. The low-medium density foam table makes it super easy to achieve a firm attachment.
I work on 10 sets of tensioners at a time. All the profiling and shaping is done with a hand file and a belt sander. Brackets are cut to length on a table saw with a carbide tipped blade. (Don't try this at home kids) Finally purchased a single flute countersink which eliminated all chatter marks from the countersunk holes.
I soaked the bottom bracket in a hot citric acid solution to remove the flux and then gave it a scrub with a gentle scrubby pad. It doesn't look as good in the cold light of day as it did last night. I can't tell whether some of the rusty colour is surface rust or copper coming out of the brass filler. There is certainly some copper around. It should do the job though.
I think this is a bracket fungi and certainly the largest specimen I have ever seen. It was wrapped around the remains of an old tree stump. HTT!
The bracket is reverse mounted to the small ball head for storage. Compare size to the Impact umbrella bracket.
Amazingly, poles and brackets for the wires that powered the locomotives of the Texas Transportation Company are still intact in this area.
The Pearl Brewery was a unique holdout with its own pair of electric freight locomotives as part of its wholly owned Texas Transportation Company that interchanged with Southern Pacific-later Union Pacific-in San Antonio until the plant closed in 2000 and owner Pabst moved production elsewhere.
Texas Transportation served not only the Pearl brewery but dozens of other industries at its height including the nearby Lone Star Brewery and Samuels Glass.