View allAll Photos Tagged Testing.
Photographing timber table, cloth covered chairs indoors at night with and without flash and trying exposures
and auto settings with the new SONY ILCE-6000 a6000 with Kit lens SELP1650
Tasma FN 64 tested at different speeds - from nominal ASA 64 to ASA 6, these are gloves of garlic and a tomato for those who can't figure the subject out on his or her own. Note on scratches - scratches can be caused by old ORWO cassette, because I don't know what caused the scratches, I might have to test it with another cassette.
Exposed - exposed at f 22 with a Minolta AF SLR and Minolta lens and developed in Rodinal R09 One Shot (generic rodinal) 1:25 solution for 7 minutes at room temperature, no stop bath, wash/rinse for 2 minutes, fixing, rinse
My next RC plane will be the Pulse 125. A recommended modification is the addition of a second pushrod (joined to the first) so that both elevators are controlled. This is sample test with some coathanger wire, thin copper wire harvested from speaker cable, and a 30W soldering iron with rosin core solder... and PLENTY of flux.
EPCOT.
Walt Disney World Resort in Florida, March 2013.
Visit our website for loads of Disney Character pictures and information!
[test only]
--
View me on Smugmug | 500px | Facebook | Getty Images
--
© Donfer Lu (Taiwan) All rights reserved.
You may not use my photographs on any web page, publishing, storing, commercial or non-commercial, for profit or non-profit, without my written permission.
未經本人書面認可，請勿使用本人之照片於任何網頁、出版品，營利/非營利事業上。
People visit their nearby lab testing centers for getting the needful medical support for their health requirements. The prime testing procedure that takes place in a medical laboratory is blood sample testing. As blood testing is an effective way of tracking the overall physical well-being of a body, doctors recommend having routine blood tests for leading a healthy life.
Shot with Canon 580 thru white translucent umbrella as key light (captured brilliantly in the top left corner, ahem) at roughly 1/4 to 1/16 power at 24mm (didn't keep notes). Also used 430 camera right through a snoot at 105mm and about the same power as 580. First use of snoot; discovered size of patio too small to accommodate effective use of one, although the look in this pic is kind of cool (if unintended).
From a collaborative shoot with Moss & Clover florist, Amy McCullage Hair and Amanda Humphreys MUA see the more here: www.facebook.com/media/set/?set=a.887258264658183.1073741...
What the heck?
I'll tell ya what the heck:
Test prints are an integral and often surprisingly beautiful and playful part of the hand printed process. They are never ever the same, and therefore true, one-of-a-kind, individual Monoprints. Made from varied layers and layers of inks from different print runs to check colors, clean out a messy screen and a dozen other reasons, Test Prints are spontaneously created and basically, magical. Hence once a test print is sold, that's it, gone baby.
I keep a few with me in the studio while printing and every now and then one looks suddenly nice & done. Like this one!
Olympus OMPC
ESP Metered
Fuji Superia 800
Zuiko 50mm f/1.8
ND Fader 3-400
Testing my OMPC after I brought it back from the dead.
Spike Goddard (AUS) Sahara Force India F1 VJM07 Test Driver..
Formula One Testing, Day Two, Wednesday 26th November 2014. Yas Marina Circuit, Abu Dhabi, UAE.
Leicaflex Standard (Mark II) (circa. 1966) with 90mm Elmarit R (11239). Kodak 400 CN. Nikon 9000 scanner.
This was a sample roll through a new/old camera, and as is typical from such an old camera it was off to the repair tech afterwards.
Testing Canon defaults. This one needed some sensor adjustments and a bit less haste (thus the blur).
Model Test Shoot
Pentax K200D
AB1600 w/ Octobox/no grid
white background washed out w/ 2 AB800
AB ringflash for fill
Another quick test run...
Hopefully in a few days I will have a decent night with good seeing and no moon...
3x900 seconds Ha (Bin2)
ST10@-20C
Optic Wave 12" Newtonian with Parracor (f/5.3)
Tweaked the collimation a bit more but seeing was really poor...then cloudy
Fine adjustment takes only a minute once you are already close...and only very small turns of the screw.
EDIT Looks a lot darker at my work screen...in daylight...(!)