View allAll Photos Tagged Sensors,
Build the other connector the same way.
Be careful, and think it all through. The male-female connectors have to match the male-female connectors on the bike's harness and the sensor.
And...the wire with the diode has to match up with the sensor's signal wire (black wire, of the sensor's 4 wires).
A simple, quick, and very cheap circuit to turn on an LED when it gets dark. Read more about this project here.
The O2 sensor connector is behind the starter, and for most bikes the starter must be removed to access it.
Before doing anything, disconnect the negative cable from the battery to prevent a short.
Top yellow arrow points to the power connection to the starter. This is live even if the ignition is turned off. After disconnecting the (-) cable at the battery, then disconnect this wire.
Middle yellow arrow points to a friction fit connector. Just pull it off.
Bottom blue arrow points to the O2 sensor connector.
Got a brand new Prime Lens--the Carl Zeiss Sony Alpha e-mount FE 55mm F/1.8 ZA Carl Zeiss Sonnar T* Lens! Let me know how you like it! :)
New Sony A7 R Test Photos of Bikini Swimsuit Model Goddess! Pretty, pretty, pretty woman! Shot with the awesomely sharp, sharp Carl Zeiss Sony Sonnar Carl Zeiss Sony Sony FE 55 mm F/1.8 ZA Carl Zeiss Sonnar T* Lens and finished in Lightroom 5.3 ! Was using the B+W 49mm Kaesemann Circular Polarizer MRC Filter on bright, sunny day. Check out the low glare off the rocks and water and the bright blue sky! Super sharp images and crystal-clear pictures!
Here's some video shot at the same time as stills: youtu.be/Y7gq_gCk0jE
www.youtube.com/watch?v=RiOMrZIEzg8
Join my youtube channel for goddess video shot @ the same time as the stills with the Sony A7 !
www.youtube.com/user/bikiniswimsuitmodels
Beautiful swimsuit bikini model goddess on a beautiful January Malibu morning! Shot it yesterday. :) Love, love, love the new Sony A7 R + 55mm F/1.8 lens combo!
Was a fun test shoot. Many, many more to come!
All the best on your Epic Hero's Journey from Johnny Ranger McCoy!
Modeling the black & gold "Gold 45 Revolver" Gold'N'Virtue swimsuits with the main equation to Moving Dimensions Theory on the swimsuits: dx4/dt=ic. Yes I have a Ph.D. in physics! :) You can read more about my research and Hero's Journey Physics here:
herosjourneyphysics.wordpress.com/ MDT PROOF#2: Einstein (1912 Man. on Rel.) and Minkowski wrote x4=ict. Ergo dx4/dt=ic--the foundational equation of all time and motion which is on all the shirts and swimsuits. Every photon that hits my Nikon D800e's sensor does it by surfing the fourth expanding dimension, which is moving at c relative to the three spatial dimensions, or dx4/dt=ic!
Best on your hero's journey from Johnny Ranger McCoy! :)
Falling in love with the full frame 36 megapixel e mount Sony A7R!
The books behind the pretty goddess on the Malbu bluff and surfboard are The Decline and Fall of the Roman Empire by Edward Gibbon, Homer's Iliad, Homer's Odyssey, Shakespeare, and Herman Melville's Moby Dick! My favorite books! Will have some video of the pretty model reading them beside a campfire soon.
They're all collectors editions! My books cost as much as my surfboards!
And for those who always ask, I shoot in RAW! Always! :)
This is a new textile sensor to measure water / wetness. It is 100% compatible with the Arduino platform. It detects water by changing its resistance from open circuit to a few megaohms.
This is the CCD sensor out of a Casio Exilim digital camera. The LCD was shot, and it was not worth it to get a new one. Plus it was more fun to take it apart :)
That's a pair of wire cutters it's resting on.
A simple heartbeat sensor for arduino. Communicates each beat to the computer via serial over USB. A little script in Processing sends OSC messages to SuperCollider which makes a sound. Processing also displays a graph of beats per minute readings from the Arduino.
This version sends serial messages over the USB connection, a later version sends OSC messages over ethernet (even cooler!) (http://www.flickr.com/photos/chuck_notorious/4041494889/).
Next step: use the Arduino Ethernet shield to send OSC messages directly.
Next Next Step: Use this as part of a cool multimedia performance!
(It's on this week at the Street Theatre in Canberra! www.lastmantodie.net)
Information: cmpercussion.blogspot.com/2009/07/heartbeat-sensor.html
This here I shot with my new Olympus O-MD E-M5 Mkii paired to my M. Zuiko 25mm (50mm with the crop factor). I shot it at ISO 100 || f8.0 || at a 3.2 seconds exposure......HAND HELD!
No post processing done either, from the camera here.
It's pretty annoying when you spend a load of cash on a new toy and the manufacturer hasn't ironed out all the kinks! It seems the mirror of my Nikon D600 is spraying lubricant on the sensor, as the spots visible here are not dust and have increased in number over time.
This shot is completely untouched other than being converted from RAW to JPEG. It is a worst case scenario shot, blue sky at f22, taken to illustrate the extent of the problem.
I took the camera to the shop today, they wouldn't replace the body, so I had to send it in to Nikon for repair. It will be gone for about 2 weeks after only 10 days of use. I am glad I didn't sell my K-5 (just most of its lenses).
It's a real shame as I was just getting used to the camera and liking what it can do. I'd stil recommend this camera, but I'd wait a year until they have fixed this quality control issue.
This is what I get for breaking my rule and buying a new product Day 1.
Oh well, I have got some spots to remove in Lightroom for the next batch of Kusatsu pictures...
The Aerosol Polarimetry Sensor (APS) is designed to study aerosols by observing how light behaves when scattered by the aerosol particles.
Credit: Raytheon
NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission.
Follow us on Twitter
Join us on Facebook
Sensor ultra-sônico produzido pela SeeedStudio.
O campo de detecção vai de 3cm a 4m. Este sensor trabalha com 5v.
API: garden.seeedstudio.com/index.php?title=Ultra_Sonic_range_...
Sensor in original position was reading approx 5 degrees higher than ambient. Re-positioning resulted in correct temperature readings.
Code available here - github.com/ibuildrockets/NixieTemperatureDisplay
In a retired jet at Sandia, Dennis Roach and Ciji Nelson prepare Structure Health Monitoring (SHM) Sensors.
The Comparative Vacuum Monitoring sensor is a self-adhesive rubber patch, ranging from dime-to credit-card- sized. The rubber's underside is laser-etched with rows of tiny, interconnected channels or galleries to which an air pressure is applied. Any propagating crack in the materials under the sensor breaches the galleries and the resulting change in pressure is monitored. The sensors are made by Structure Monitoring Systems, Inc. (SMS) of Australia, are inexpensive, reliable, durable, and easy to apply. They provide equal or better sensitivity than is achievable with conventional inspection methods. Besides aircraft, SHM techniques could monitor the structural well-being of spacecraft, weapons, rail cars, bridges, oil recovery equipment, buildings, armored vehicles, ships, wind turbines, nuclear power plants, and fuel tanks in hydrogen vehicles.
For more information or additional images, please contact 202-586-5251.
The latest version of PNNL’s Sensor Fish floats in water and flashes its LED lights after a test. LED lights help researchers see and retrieve the device.
Terms of Use: Our images are freely and publicly available for use with the credit line, "Courtesy of Pacific Northwest National Laboratory." Please use provided caption information for use in appropriate context.
Camera: Olympus E-M1X
Shot with: Pentax K-01 & SMC Pentax-FA 100mm F2.8 Macro
Photo: Thomas Ohlsson Photography
High speed door - Microwave Radar Motion Sensor for Automatic Door
An accessory wich is widely used for automatic door is the radar motion detector.
The system works with a microwave radar which detects any movement in front of the door, managing to differentiate between pedestrians and vehicles.
It is user friendly because of the adjustable settings, that optimizes the sensor for all automatic door applications.
It has been specifically designed to be applicated to industrial doors, such as:
- High speed roll up doors
- Fast-acting fold-up doors
- Crash doors
- Sliding doors
- Swing doors
Although we use it for industrial applications, this system can be used for security reasons, and it can be suitable for both internal and external applications.
Microwave technology
For any further information visit our website or contact us:
OCM Industrial Doors Srl
Via Mongilardi, 3
13900 Biella, Italy
Tel.: (+39) 015 . 840 83 01
Fax: (+39) 015 . 849 26 60
Just thought I'd share this little tip with everyone on how to check to see if you need a sensor cleaning. I noticed a couple of spots in the top right corner of some of my photos and thought it was the lens at first. After switching lenses and seeing that the spots were still there I thought I'd investigate sensor cleaning procedures.
I found this site:
www.cleaningdigitalcameras.com/inspecting.html
that explains how to take a test shot (seen above) to see how much dust is on your camera sensor. As expected I have a couple of dark spots in the top right of mine ... and a bunch of others I hadn't noticed in my photos.
It's been just over a year since I got my camera so I'm going to send it in for a professional cleaning which will hopefully get rid of 99.99% of the dust.
Hope this tip proves helpful.
(Project 365 Day 36, Part 2)
This is a full-sized crop of one side of the Wii "sensor bar" from the last picture, which you should go look at first. What's neat about this is that those lights are completely invisible to the naked eye, because they're infrared, but the CCDs on my digital camera pick it up somehow. Just another reminder that cameras and eyes actually work differently. :)
Here you can see the D40x sensor with its IR blocking filter removed. Without this filter, and without an IR passing filter, the D40x now records both IR and Visible light.
For those who've wondered at my probably annoyingly often references to the damage to my camera, here it is in all its glory.
The only reason I'm sharing this is because of the amazing flare my 10-20mm produced here.
SNL Dennis Roach with a Comparative Vacuum Monitoring (CVM) Sensor showing galleries etched-sensors underside. He lead team that's evaluating some-sensors for Structural Health Monitoring (SHM) aircraft and safety equipment.
The Comparative Vacuum Monitoring sensor is a self-adhesive rubber patch, ranging from dime-to credit-card-sized. The rubber's underside is laser-etched with rows of tiny interconnected channels or galleries to which an air pressure is applied. Any propagating crack in the materials under the sensor breaches the galleries and the resulting change in pressure in monitored. The sensors are made by Structure Monitoring Systems, Inc. (SMS) of Australia, are in expensive, reliable, durable, and easy to apply. They provide equal or better sensitivity than is achievable with conventional inspection methods. Besides, aircraft, SHM techniques could monitor the structural well-being of spacecraft, weapons, rail cars, bridges, oil recovery equipment, buildings, armored vehicles, ships, wind turbines, nuclear power plants, and fuel tanks in hydrogen vehicles.
For more information or additional images, please contact 202-586-5251.
Agfa Optima Sensor compact 35mm camera
Specifications:-
Type: 35mm compact camera
Size: 104 mm x 68 mm x 54 mm (W x H x D)
Image Format: 24 x 36 mm (W x H)
Lens: Agfa Solitar, 40 mm f/2.8
Diaphragm: Automatic f/2.8 to f/22
Focusing: Manual scale pictograms on top of the focus ring/ meter/feet scale on bottom, focusing 3ft/1.09m - infinity
Shutter Speeds: 1/500 second - 15 seconds
Viewfinder: Large direct finder with parallax marks for near focus
Film Loading: Manual
Film Transport: Manual single stroke lever, also used to rewind film when the 'R' button is depressed and turned
Film Speeds: 25 ASA/15 DIN to 500 ASA/28 DIN, selected on a ring around the lens
Flash Contact: Hot shoe, aperture selected manually with flash
Cable Release Socket: On left hand side of the camera body
Tripod Socket: 1/4 in. on right hand side which doubles as camera strap attachment
Battery: 3 V625U batteries, located by opening the camera back