View allAll Photos Tagged Retainer
Kishiwada Castle, located in Osaka, was built by Koide Hidemasa, a retainer of Toyotomi Hideyoshi, in 1582, near the site of where Kusunoki Masashige built a fort in the 1300s. In 1640, ownership of the castle was transferred to Okabe Norikatsu and the Okabe family maintained possession of the castle and the Kishiwada fief until the Meiji Restoration in 1868.
In 1827 lightning destroyed the castle’s main keep and much of the remaining part of the castle was destroyed during the fighting between the Tokugawa and Imperial forces during the civil strife associated with the Meiji Restoration. The current three-story ferroconcrete keep was built in 1954, but it has been confirmed that the original donjon was 5 stories. The moat and the outer stone walls are all that remain of the original castle. All other structures, including the gate, are reconstructions.
The renowned garden designer, Mirei Shigemori, constructed the Hachi Jin no Niwa rock garden in 1953 using chlorite schist from Okinoshima Island in Wakayama Prefecture and white sand from the Shirakawa River in Kyoto. He personally chose all the larger stones and arranged the garden based on the Chinese concept of the battle formation of the eight elements of heaven: earth, wind, clouds, dragons, tigers, birds and snakes.
This statue of Nitta Yoshida's retainer can be found outside of Ohta Station in Gunma, Japan.
Nitta Yoshisada was born in what is now Ohta City in Gunma Prefecture 1301. The Nitta were a branch of the Minamoto clan but were not on the best of terms with the founder of the Kamakura Shogunate, Minamoto Yoritomo, and therefore did not hold any high-ranking office or position within the regime. Thus, there was really no love lost between the Nitta and the Kamakura government, which was now ruled by hereditary Hōjō regents. So when the Emperor Go-Daigo instigated a rebellion against the Kamakura Shogunate in a bid to restore imperial rule, the Nitta rose to the challenge, as well as did their other relatives, the Ashikaga clan, led by Ashikaga Takauji. Together, the Ashikaga and Nitta helped to bring about the end of the Kamakura Shogunate and it was Nitta Yoshisada who led the attack on Kamakura that effectively brought about the regime’s collapse in 1333.
However, after the imperial restoration, things became quite testy between Ashikaga Takauji and Go-Daigo. A mere three years after the defeat of the Kamakura Bakufu, Takauji launched his own successful rebellion that put him in power, but forced a Northern and Southern split in the Imperial Court when Go-Daigo fled. Nitta Yoshisada, who never got along with his Ashikaga cousins, along with Kusunoki Masahige, allied themselves with Go-Daigo, and chose the losing side. Yoshisada died in battle against the Hosokawa in 1338. It is alleged that Yoshisada, when his horse was shot out from underneath him pinning him, cut off his own head. Gruesome, but probably not true.
Kishiwada Castle, located in Osaka, was built by Koide Hidemasa, a retainer of Toyotomi Hideyoshi, in 1582, near the site of where Kusunoki Masashige built a fort in the 1300s. In 1640, ownership of the castle was transferred to Okabe Norikatsu and the Okabe family maintained possession of the castle and the Kishiwada fief until the Meiji Restoration in 1868.
In 1827 lightning destroyed the castle’s main keep and much of the remaining part of the castle was destroyed during the fighting between the Tokugawa and Imperial forces during the civil strife associated with the Meiji Restoration. The current three-story ferroconcrete keep was built in 1954, but it has been confirmed that the original donjon was 5 stories. The moat and the outer stone walls are all that remain of the original castle. All other structures, including the gate, are reconstructions.
The renowned garden designer, Mirei Shigemori, constructed the Hachi Jin no Niwa rock garden in 1953 using chlorite schist from Okinoshima Island in Wakayama Prefecture and white sand from the Shirakawa River in Kyoto. He personally chose all the larger stones and arranged the garden based on the Chinese concept of the battle formation of the eight elements of heaven: earth, wind, clouds, dragons, tigers, birds and snakes.
YD13 303 001 ADVANCE OUTPUT SHAFT 4110000076341
1 Washer 8 GB/T7244-1987 8 19
Self-locking nut
M10×1.25
12575614/10125 1
2 Nut M8 GB/T6170-2000 3 20 O-sealing ring 21.89×2.62 14457681/14618 1
3 Studs 13544324/10219 3 21 Operating shaft, load control 5129388/1.82.550 1
4 Spacer, sector plate 5117204/1.85.515 3 22 Key 4×14 GB 1096-76 1
5 Cap, spring, control sector plate 5129672/1.82.519 1 23 Retainer ring 8 GB/T894.1-1986 3
6 Spring 4973370/1.82.513 1 24 Roller 5111028/1.82.562 3
7 Spring 4952761/1.82.511 1 25 Pin 5011775/1.82.532 1
8 Friction disc 5153008/1.82.508A 2 26 Spring, lever arm 5148884/1.82.588 1
9 Friction disc 5153007/1.82.508 1 27 Pull rod, control valve 5120281/1.82.586 1
10 Bolt M8×25 GB/T5783-2000 3 28 Ball Bolt 5120282/1.82.587 1
11 Support, control lever 5129377SZ/1.82.517 1 29 Nut M10×1.25 GB/T6173-2000 1
12 Spiral spring pin 4×24 BZ/JHX-SZ 1 30 Spring clip 8 11064076/12252 3
13 O-sealing ring 10.82×1.78 14453081/14618 2 31 Pin 5117161/1.82.557 1
14 Plug 5129399/1.82.544 1 32 Pin 5117136/1.82.561 1
15
Rectangular cross-section seal
ring 22×28×1.5
10263460/14607 1 33 Lever arm assembly 5117135/1.82.541 1
16 Rise-Hold-Fall joystick 5129393/1.82.542 1 34 Joystick 5120291/1.82.541 1
17 Hub unit, load control lever 5129376/1.82.502 1 35 Needle bearing 14×20×12 5109160/1.82.536 4
18 Hub unit, position control lever 5129374/1.82.518A 1 36 Bushing, load control lever 5116251/1.82.543 1
37 Key 5×10 GB 1096-79 1
38 Crank axle 5129386/1.82.506 1 52 O-sealing ring 15.54×2.62 14457281/14618 1
39 Support, lever 5129400/1.82.531 1 53 Shaft, inner lever 5135221/1.82.533 1
40 Spring 4959139/1.63.807 1 54 Bushing, load control lever 5135219/1.82.546 1
41
Bolt, limit adjustment
M8×1.25×55
5121522/1.82.540 1 55 Inner lever assembly 5117151/1.82.535 1
42
Screw tube, limit adjustment
M8×1.25×20
5121523/1.82.540A 1 56
Control lever (RR), load
control
885136355/1.82.548A 1
43 Stopper (FR) 885120284/1.82.539A 1 57 Fork, rod, load control 885136356/1.82.548 1
44 Retainer ring 12 13397576/12248 1 58 Spring clip 11064176/12252 1
45 Pin 5117156/1.82.530 1 59 Cam, position control 5117143/1.82.522 1
46 Raise-Neutral-Lower cam 5129396/1.82.527 1 60 Limit link 5120285/1.82.538 1
47 Cam, load control 5122497/1.82.524 1 61 Spring 4973650/1.82.563 1
48 Screw M8×12 GB 71-85 1 62 Elastic cylindrical pin 3×22 BZ/JHX-SZ 1
49 Bolt M10×1.25×18 GB/T5786-2000 1 63 Elastic cylindrical pin 4×20 BZ/JHX-SZ 1
50 Washer 10 14198800/10182 1 64 Needle bearing 12×16×10 5117138/1.82.537 2
51
Grip, shaft, inner lever, load
control
5135220/1.82.515A 1 65
Joystick assembly, main
control valve
5126220/1.82.512 1
66 Bolt M8×20 GB 30-76 2
1 Knee 5116243/1.89.622 1 12 Long pole unit, load control SZ804.56.016 1
2 Plug 25 4997756/1.89.698 1 13 Retainer ring 10 SZ804.56.038 2
3 Joint bearing U25 GB 304-6 2 14 Pole with ball 5119529/1.21.071 1
4 Spacer, ball pivot 5116246/1.89.624A 2 15 Dowel pin 15×22 GB/T6173-2000 1
5 Nut M10×1.25 SZ804.56.113 2 16 Pin, roller 5109172/1.89.635 2
6 Retainer ring, rod (LWR) 5111643/1.89.657 2 17 Roller 5109156/1.89.632 1
7 Nut M10×1.25×55 SZ804.56.013-2 2 18
Sensing fork unit, load
control
885123964/1.89.627 1
8 Sensing shaft, load control SZ804.56.114A 1 18.1 Sensing fork, load control 885123963/1.89.627 1
9 O-sealing ring 15.08×2.62 5130456/1.89.657 1 18.2 Needle bearing 14×20×12 5109160/1.82.536 2
10
Bushing, sensing shaft, load
control
SZ804.56.104 1 19 Hexagon head plug M22×1.5 10305174/14530 1
11 Dowel pin 15×22 GB/T6170-2000 2 20
Rectangular cross-section
seal ring 22×28×1.5
10263460/14607 1
21 Support, knee 124562/1.89.616 1
22 Bolt 16×1.5×115 B5785-86 7
23 Oil seal assembly, knee SZ804.56.023 2
24 Spacer, shaft, ball joint 5116245/1.89.623A 2
1 Support assembly, quick change coupler SZ804.56.024-1 1 12 Bolt M10×1.5×55 GB/T5785-2000 2
2 Pin 3.2×22 GB 91-85 1 13 Nut M10×1.25-Zn.D GB889.2-86 2
3 Washer 12
GB/T97.1-2002
1 14
Connecting pin (UPR), lift link (LH
& RH)
5130643/1.89.657
2
4 Stop spring, diagonal-brace hook 5140549/1.82.067 1 15 Lift link assembly SZ804.56.013-2 2
5 Hook unit, rod (UPR) SZ804.56.026 1 15.1 Clevis (UPR), lift link SZ804.56.114A 2
6
Connecting pin assembly (FR), rod
(UPR)
5120672/1.89.669
1 15.2
Connecting pin (UPR), lift link (LH
& RH)
5130643/1.89.657
2
7 Split pin 44007661/1.82.945 5 15.3 Clevis (MID), lift link SZ804.56.104 2
8 Link assembly (UPR) SZ804.56.011 1 15.4 Nut M30-Zn·D GB/T6170-2000 2
8.1 Screw assembly (FR), rod (UPR)
5143009/1.89.661A
1 15.5
Adjustment screw tube assembly,
lift link
SZ804.56.016
2
8.2 Nut M30-Zn.D GB/T6170-2000 1 15.6 Clevis assembly (LWR), lift link SZ804.56.038 2
8.3
Adjustment screw tube assembly, link
(UPR)
LX804F.56.017
1
8.4 Screw assembly (RR), link (UPR) 5143010/1.89.662A 1
9 Pin (RR), upper link 822483/1.82.967 1
10 Lock pin assmbly 4967704/1.82.941A 1
11 Link assembly (LWR, RH) SZ804.56.031 1
11.1 Link assembly (LWR, LH) SZ804.56.030 1 www.luseng.cc/products/yd13-303-001-advance-output-shaft-...
Taken on the Thames Estuary at Grays, another D200 test shot.
Have a look close up and you'll see a Cormorant with wings spread on the buoy!
P1500852 - Well it look really good in the view finder the wrong way up, oh well have to try again at some point. See below for the context, shop windows.
Just could not get any shallower and that bloke in the wasp shirt would not go away :) Nearly got all the back ground stuff lined up as well!
SOOC
DMC G1 + Helios 44M
Free hand
Do It Daily @ Today's Posting
Shoot wide open today. Make a creative photo that uses a shallow depth of field to good effect., post it then Tag it with #TP127
200811-N-VQ790-1003
NEWPORT NEWS, Va. (Aug. 11, 2020) Hospital Corpsman 3rd Class Ellysse Tilley, assigned to the dental department aboard the Nimitz-class aircraft carrier USS George Washington (CVN 73), pours alginate impression powder into a mixing bowl in order to create a maxillary essix retainer. George Washington is undergoing refueling complex overhaul (RCOH) at Newport News Shipyard. RCOH is a multi-year project performed only once during a carrier’s 50-year service life that includes refueling the ship’s two nuclear reactors, as well as significant repairs, upgrades, and modernization. (U.S. Navy photo by Mass Communication Specialist 2nd Class Trey Hutcheson/Released)
after removing the retainer bar on my QAD Ultra Rest Hunter i eliminated fltching contact and got these much nicer tares while paper tuning. I might need to drop the noching point a smidge more.
Did you know that you can order your custom dental devices online and save hundreds of dollars? For instance, if you need custom-made flipper teeth for adults, you can simply order them online and bypass all the inconvenience and costs associated with a conventional dental appointment.
This earlier version, maybe the first has a one piece bottom construction unlike the latter CB 88s where they had aluminum or brass screw-able bottom caps, this has a top screw-able cap. Here you have a C-clip that holds a brass washer, underneath are 2 o-rings that seal in the oil, easy to remove too, to change o-rings if they ever leak, I used x-acto blade to remove the clip, was careful and left no marking at all on the anodized body
Today was one for the books. In one day I received an offer letter for a new career, gave notice at my current employer AND signed papers for the new house. I can’t believe how much is going on right now.
Rebuilding a model Scooter I found on eBay. I had a number of bits missing so I took impressions of the parts from a Bluebird LT model I'm rebuilding.
This reconstructed yagura (turret) has been converted into a kendo dojo.
Kishiwada Castle, located in Osaka, was built by Koide Hidemasa, a retainer of Toyotomi Hideyoshi, in 1582, near the site of where Kusunoki Masashige built a fort in the 1300s. In 1640, ownership of the castle was transferred to Okabe Norikatsu and the Okabe family maintained possession of the castle and the Kishiwada fief until the Meiji Restoration in 1868.
In 1827 lightning destroyed the castle’s main keep and much of the remaining part of the castle was destroyed during the fighting between the Tokugawa and Imperial forces during the civil strife associated with the Meiji Restoration. The current three-story ferroconcrete keep was built in 1954, but it has been confirmed that the original donjon was 5 stories. The moat and the outer stone walls are all that remain of the original castle. All other structures, including the gate, are reconstructions.
The renowned garden designer, Mirei Shigemori, constructed the Hachi Jin no Niwa rock garden in 1953 using chlorite schist from Okinoshima Island in Wakayama Prefecture and white sand from the Shirakawa River in Kyoto. He personally chose all the larger stones and arranged the garden based on the Chinese concept of the battle formation of the eight elements of heaven: earth, wind, clouds, dragons, tigers, birds and snakes.
The son of Tokugawa retainer Tadakatsu Honda, Tadatomo's land holdings earned an annual 100,000 koku. He was general during the Battle of Tennoji in the summer campaign of Osaka castle (1615). Although his efforts led to the death of Sanada Yukimura, he, also, did not survive.
Osaka-jo is a re-creation of what was once a much larger complex, and home to Toyotomi Hideyoshi, one of the three great unifiers of Japan. Prior to this area being Osaka Castle, it was the site of the Hongan-ji citadel, a nearly impenetrable fortress built by monks who unwisely went up against Oda Nobunaga. The donjon area you see today dates back to 1931, while the original Osaka-jo was completed in 1586. It was destroyed/damaged and re-built several times between 1615 and the days of WWII.
Osaka Castle. Chuo-ku, Osaka.
This is a statue of the fierce Sengoku daimyo, Katō Kiyomasa, who although was a loyal retainer of Toyotomi Hideyoshi, played a key role in supporting Tokugawa Ieyasu's consolidation after Hideyoshi's death in 1598.
The quintessential Sengoku bad-ass, Kiyomasa was not only a terror on the battlefield, as proven time and time again in Japan as well as during the Japanese invasion of Korea where he tangled with Korean and Ming Chinese forces (not to mention tigers), he was also a master castle builder. Kiyomasa played a key role in building the stone defensive works of Nagoya Castle and supposedly rode many of the giant stones as they were dragged into place, urging the workers on. This statue of him "riding" a stone can be found on the grounds of Nagoya Castle.
The Oyamada served as the chief retainers of the Yagyū clan.
Many of us know of the Yagyū clan from what we see in samurai TV shows, movies and fictional books. More often than not, the Yagyū are portrayed as devious puppet masters, controlling the Shogunate’s spy and information gathering network and manipulating it for their own profit—with the exception of the one-eyed Jūbei, who like Musashi, fought a lot of duals, both imaginary, real and reel. Hehe. Also, when not chasing after Ittō Ogami and his son Daigorō, the Yagyū were a fairly normal daimyo clan, administering their small fief near Nara and teaching swordsmanship to the first three Tokugawa Shoguns.
Like most daimyo clans, the Yagyū ran into financial trouble during the Edo period. The burdens of funding the alternative attendance journeys to and from Edo every other year along with maintaining residences in the Shogun’s capital were a heavy drain on the small clan’s finances. The Oyamada family served as the hereditary o-karo (chief senior retainers) of the Yagyū clan and played a big role in helping turn around the clan’s finances in the Edo period. The Oyamada house has survived the test of time and has been turned into a very interesting and fun museum that sheds some light on what it was to live in the Yagyū han. I loved this house, as those who know me, know that I have an affinity for the lights, shadows and beautiful contrasts that old Japanese houses create.
when given a choice, always go for glitter!
I used to wear these shoes, not anymore.
the retainer is fairly new. I'm wearing it right now. Since it was one of the options when I ordered it, I just had to go glitter.
The son of Tokugawa retainer Tadakatsu Honda, Tadatomo's land holdings earned an annual 100,000 koku. He was general during the Battle of Tennoji in the summer campaign of Osaka castle (1615). Although his efforts led to the death of Sanada Yukimura, Tadatomo also did not survive.
Osaka-jo is a re-creation of what was once a much larger complex, and home to Toyotomi Hideyoshi, one of the three great unifiers of Japan. Prior to this area being Osaka Castle, it was the site of the Hongan-ji citadel, a nearly impenetrable fortress built by monks who unwisely went up against Oda Nobunaga. The donjon area you see today dates back to 1931, while the original Osaka-jo was completed in 1586. It was destroyed/damaged and re-built several times between 1615 and the days of WWII.
Osaka Castle. Chuo-ku, Osaka.