View allAll Photos Tagged Refinement
Old Barn in
Shot with D200, +2, 00, -2, tone mapped in Artizen and finished in Photoshop. Poster Edge Finished Filter.
2017/12/09
Quoted from "https://awionline.org/content/fundamentals".
---------------------------------------------------------------------------------------------------
The US Department of Agriculture (USDA) reports that in fiscal year 2010, there were 1,334,693 animals in research. This number included dogs, cats, nonhuman primates, guinea pigs, hamsters, rabbits, pigs and sheep. It does not include rats of the genus Rattus, mice of the genus Mus, or birds—despite the fact that these animals make up the overwhelming majority of animals in research.
Studies with animals include basic research such as genetics, developmental biology and behavioral work, as well as applied research such as biomedical research, xenotransplantation (the transplantation of living cells, tissues or organs from one species to another), and toxicology and drug testing. In addition to research and testing, education is conducted with animals.
Overall, while research with a few species such as hamsters and rabbits appears to be trending down, the number of species other than rats and mice in research is at a five-year high. The number of nonhuman primates in research has increased, as has research conducted with fish, particularly zebrafish.
The number of rats and mice in research is believed to be increasing dramatically—in large part due to studies involving genetic modification. Estimates regarding the number of rats, mice and birds in research range from 25 million to over 100 million. As these animals are excluded from protection under the Animal Welfare Act (AWA), there is no accounting to the USDA or any other federal agency of these millions of lives that are sacrificed for research, testing and teaching.
A tremendous number of rodents in research are the product of genetic engineering. Often the goal is to more closely mimic human diseases. There are welfare issues associated with breeding such animals (a large number of surplus animals are generated to achieve a small number with the desired genome), as well as issues encountered during the conduct of the research—as these animals have a strong potential for suffering and experience high premature death rates.
Most animals sold for research purposes are bred specifically for this purpose. Commercial breeders are licensed “Class A” by the USDA and required to meet minimum standards under the Animal Welfare Act (AWA). Other animals are wild-caught—among them birds, fish, reptiles, amphibians and some mammals as diverse as nonhuman primates, opossum, and deer mice. USDA-licensed “Class B” dealers also serve as middlemen, acquiring animals from other sources and then selling the animals to laboratories. Some dogs and cats are acquired directly from municipal pounds.
All animals in research should be treated as humanely as possible. Rats, mice and birds, in particular, deserve the legal protection afforded other species via the Animal Welfare Act. Researchers doing work with any animal species should use the “3R's” as their guiding principles: replacement (substitution with non-animal methods), reduction (methods of obtaining data using fewer animals), and refinement (methods that alleviate or minimize animal suffering and enhance animal welfare).
Photo credit: Chen, Ho-Wen, supported by Lin, Li-Yih Lab, the Department of Life Science, National Taiwan Normal University, Taiwan, ROC
The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.
Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.
The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.
INSPIRATION
In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.
ARCHITECTURE AND DESIGN
The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.
TOMB
The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.
The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.
The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.
The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.
The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.
EXTERIOR DECORATIONS
The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.
The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.
Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.
On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.
INTERIOR DECORATION
The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.
Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.
The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."
GARDEN
The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.
Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.
Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.
OUTLYING BUILDINGS
The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.
The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.
At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.
CONSTRUCTION
The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.
The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.
According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.
The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.
LATER DAYS
Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.
By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.
THREATS
In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.
More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.
Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.
TOURISM
The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.
The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.
The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.
MYTHS
Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.
No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.
Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.
In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.
WIKIPEDIA
We gussied up this small chandelier by adding the refinements of the circle at the top on the ceiling, and the cute cream on white lamp shades, with the large leaded crystal underneath to lend a bit of extra sparkle to the small dinning room. Turned it from pleasant to very nice classic to match and enhance the style of the drapes and other decor. Plastic ceiling medallan thingie $6, shades $5 each, crystal $15, and the lamp itself was $66.
Bonhams : the Zoute Sale
Estimated : € 70.000 - 90.000
Sold for € 55.200
Zoute Grand Prix 2018
Knokke - Zoute
België - Belgium
October 2018
'There are few who would argue - we included - that the 500 SL is one of the world's finest luxury sports cars; beautifully styled and superbly engineered. Its engine an automatic transmission set extremely high standards in terms of smoothness and refinement while in most conditions its handling and roadholding are of the highest order.' - Motor.
Introduced alongside the outwardly similar 380 SL roadster and SLC coupé models at the Geneva Salon in March 1980, the 500 SL and 500 SLC retained the Type 107 bodyshell first introduced in 1971/72 in virtually unchanged form, the most noticeable difference being the addition of a front spoiler. Built on a longer wheelbase, the coupé models accommodated two rear seat passengers and provided greater boot space than their open-topped siblings. The running gear followed Mercedes-Benz's established pattern, comprising all-independent suspension and four-wheel disc brakes, while a new four-speed automatic transmission was standard equipment.
The 500 SL and 500 SLC featured the all-alloy 4,973cc overhead-camshaft V8 engine that had debuted in the 450 SLC 5.0 of 1977. Lighter, more powerful and less thirsty than the old 4.5-litre iron-block V8, the 5.0-litre produced 240bhp at 5,000rpm, an output sufficient to propel the luxuriously equipped yet lightweight 500 SL/SLC to 225km/h. With approximately the same amount of power on tap as the legendary 300 SL sports car, the 500 SL/SLC was both lighter and slightly quicker off the mark, though a little down on top speed when compared to its illustrious cousin.
Although shorter in the wheelbase than the superseded 450, the newcomers retained their predecessors' successful and long-established body style, which now featured aerodynamic spoilers at front and rear. The running gear too remained unchanged in essence, though improvements were made to the all-independent suspension and to the brakes, which gained larger pads and anti-lock as an option. As on the smaller models, four-speed automatic transmission was standard. The previous auto 'box had disappointed some, but Motor magazine found the new version 'equal in the smoothness of its changes to anything achieved by Rolls-Royce or Chrysler in America'. Depending on the destination market, the inventory of standard equipment included central locking, electric windows, cruise control, headlamp wash/wipe, power steering, a limited-slip differential, and alloy wheels. The 500 SL/SLC was not officially sold in the USA, though that did not stop would-be owners importing them privately. In 1989, after 17 years in production, the elegant Type 107 family was retired to the enduring regret of many Mercedes-Benz enthusiasts.
Presented in outstandingly original condition – down to the smallest detail - this 107-series Mercedes-Benz 500 SL retains matching numbers and matching colours, and has the very desirable factory-optional rear seat (code 565). The car was registered in Berlin in January 1989 by its first owner, and remained in Berlin until 1990 when it travelled to Monaco, staying there for 27 years. It is currently in the hands of its third owner, who purchased the car in 2017, and has covered only 25,710 kilometres from new, as verified by the accompanying service records. Services have been carried out as follows:
- 1,132 km: 16/5/89
- 6,173 km: 4/3/92
- 7,506 km: 26/7/93
- 10,556 km: 5/2/97
- 16,745 km: 28/1/03
- 17,855 km: 11/2/05
- 17,855 km: 23/6/06
- 21,307 km: 7/4/09
- 23,424 km: 30/5/12
- 24,516 km: 8/6/15
- 24,642 km: 8/9/15
- 25,300 km: 19/4/17
This beautiful 500 SL has retained its full documentation: the sales brochure; original upholstery brochure; original datacard; user handbook, original service handbook; and other Mercedes-Benz paperwork. It also has its three keys and its full and original tool kit. Factory options include a hardtop in body colour with heated rear screen; front heated seats; graduated tinted windscreen; alloy wheels; air conditioning; central locking; electric windows; and the aforementioned rear seats (full specification listing available). It also comes with the fully lined factory hardtop that makes this SL usable no matter what the weather.
Recent maintenance has included new suspension silent block buses, cradles, and tie rods; brake pads; tyres (x4); cylinder head gaskets; ancillary drive belts; distributor cap; battery; air conditioning recharge; and airbag diagnosis (OK). This car also benefits from a transferable warranty (parts and labour, valid until February 2019) issued by a Mercedes-Benz Classic dealer located in Paris. Finished in its original colour combination of Arctic White with blue leather interior, this beautiful 500 SL is worthy of the closest inspection.
For anyone who lived in the 1960's and 70's, Omar Sharif was a household name. The handsome Egyptian brought an intelligent refinement to the ladies' man characters he often played on the big screen.
Sharif was probably the best known for his performance in "Dr. Zhivago", which was where his tender intellectualism shone. Sharif later said that he thought of his character in the movie as "perfect" and found no fault in him.
An avid bridge player, Sharif had a syndicated column in newspapers, where he demonstrated a mastery of the game.
Omar Sharif died in 2015 of a heart attack, but his movies live on.
This shot was taken off the television screen, and is from the movie, "Funny Girl", in which he played opposite the legendary, Barbara Streisand.
Bonhams : the Zoute Sale
Estimated : € 70.000 - 90.000
Sold for € 55.200
Zoute Grand Prix 2018
Knokke - Zoute
België - Belgium
October 2018
'There are few who would argue - we included - that the 500 SL is one of the world's finest luxury sports cars; beautifully styled and superbly engineered. Its engine an automatic transmission set extremely high standards in terms of smoothness and refinement while in most conditions its handling and roadholding are of the highest order.' - Motor.
Introduced alongside the outwardly similar 380 SL roadster and SLC coupé models at the Geneva Salon in March 1980, the 500 SL and 500 SLC retained the Type 107 bodyshell first introduced in 1971/72 in virtually unchanged form, the most noticeable difference being the addition of a front spoiler. Built on a longer wheelbase, the coupé models accommodated two rear seat passengers and provided greater boot space than their open-topped siblings. The running gear followed Mercedes-Benz's established pattern, comprising all-independent suspension and four-wheel disc brakes, while a new four-speed automatic transmission was standard equipment.
The 500 SL and 500 SLC featured the all-alloy 4,973cc overhead-camshaft V8 engine that had debuted in the 450 SLC 5.0 of 1977. Lighter, more powerful and less thirsty than the old 4.5-litre iron-block V8, the 5.0-litre produced 240bhp at 5,000rpm, an output sufficient to propel the luxuriously equipped yet lightweight 500 SL/SLC to 225km/h. With approximately the same amount of power on tap as the legendary 300 SL sports car, the 500 SL/SLC was both lighter and slightly quicker off the mark, though a little down on top speed when compared to its illustrious cousin.
Although shorter in the wheelbase than the superseded 450, the newcomers retained their predecessors' successful and long-established body style, which now featured aerodynamic spoilers at front and rear. The running gear too remained unchanged in essence, though improvements were made to the all-independent suspension and to the brakes, which gained larger pads and anti-lock as an option. As on the smaller models, four-speed automatic transmission was standard. The previous auto 'box had disappointed some, but Motor magazine found the new version 'equal in the smoothness of its changes to anything achieved by Rolls-Royce or Chrysler in America'. Depending on the destination market, the inventory of standard equipment included central locking, electric windows, cruise control, headlamp wash/wipe, power steering, a limited-slip differential, and alloy wheels. The 500 SL/SLC was not officially sold in the USA, though that did not stop would-be owners importing them privately. In 1989, after 17 years in production, the elegant Type 107 family was retired to the enduring regret of many Mercedes-Benz enthusiasts.
Presented in outstandingly original condition – down to the smallest detail - this 107-series Mercedes-Benz 500 SL retains matching numbers and matching colours, and has the very desirable factory-optional rear seat (code 565). The car was registered in Berlin in January 1989 by its first owner, and remained in Berlin until 1990 when it travelled to Monaco, staying there for 27 years. It is currently in the hands of its third owner, who purchased the car in 2017, and has covered only 25,710 kilometres from new, as verified by the accompanying service records. Services have been carried out as follows:
- 1,132 km: 16/5/89
- 6,173 km: 4/3/92
- 7,506 km: 26/7/93
- 10,556 km: 5/2/97
- 16,745 km: 28/1/03
- 17,855 km: 11/2/05
- 17,855 km: 23/6/06
- 21,307 km: 7/4/09
- 23,424 km: 30/5/12
- 24,516 km: 8/6/15
- 24,642 km: 8/9/15
- 25,300 km: 19/4/17
This beautiful 500 SL has retained its full documentation: the sales brochure; original upholstery brochure; original datacard; user handbook, original service handbook; and other Mercedes-Benz paperwork. It also has its three keys and its full and original tool kit. Factory options include a hardtop in body colour with heated rear screen; front heated seats; graduated tinted windscreen; alloy wheels; air conditioning; central locking; electric windows; and the aforementioned rear seats (full specification listing available). It also comes with the fully lined factory hardtop that makes this SL usable no matter what the weather.
Recent maintenance has included new suspension silent block buses, cradles, and tie rods; brake pads; tyres (x4); cylinder head gaskets; ancillary drive belts; distributor cap; battery; air conditioning recharge; and airbag diagnosis (OK). This car also benefits from a transferable warranty (parts and labour, valid until February 2019) issued by a Mercedes-Benz Classic dealer located in Paris. Finished in its original colour combination of Arctic White with blue leather interior, this beautiful 500 SL is worthy of the closest inspection.
Refinement of my third draft of PennLUG's new downtown layout. See original proposal here.
www.flickr.com/photos/steampoweredbricks/14845893321/
Updates from version 3.
www.flickr.com/photos/steampoweredbricks/14714890747/
Everything has pretty much remained the same from the original third draft with the exception of the trolley car barn area. I added a small electrical substation and a misc. building to the top of the area to fill in space. I think I'm mostly happy with the car barn area now. The trolley stop at the other end of the line has not been finalized yet.
Mosaic from the Old St. Peter in Rome. P. 109 in: Die Katharer - Ketzer des Mittelalters. Malcolm BARBER (2003/2008). The Cathars. Dualist heretics in Languedoc in the High Middle Ages.
---
Pope Innocent III (Latin: Innocentius III; 1160 or 1161 – 16 July 1216), born Lotario dei Conti di Segni (anglicized as Lothar of Segni) reigned from 8 January 1198 to his death in 1216.
Pope Innocent was one of the most powerful and influential of the medieval popes. He exerted a wide influence over the Christian states of Europe, claiming supremacy over all of Europe's kings. He was central in supporting the Catholic Church's reforms of ecclesiastical affairs through his decretals and the Fourth Lateran Council. This resulted in a considerable refinement of Western canon law. He is furthermore notable for using interdict and other censures to compel princes to obey his decisions, although these measures were not uniformly successful.
Innocent greatly extended the scope of the crusades, directing crusades against Muslim Spain and the Holy Land as well as the Albigensian Crusade against the Cathars in southern France. He organized the Fourth Crusade of 1202–1204, which ended in the disastrous sack of Constantinople. Although the attack on Constantinople went against his explicit orders, and the Crusaders were subsequently excommunicated, Innocent reluctantly accepted this result, seeing it as the will of God to reunite the Latin and Orthodox Churches.
In the event, the sack of Constantinople and the subsequent period of Frankokratia led to an increase in the hostility between the Latin and Greek churches. The Byzantine empire was restored in 1261 but it never regained its former strength until its final destruction in 1453.
Lotario de' Conti was born in Gavignano, Italy, near Anagni. His father was Count Trasimund of Segni and was a member of a famous house, Conti di Segni (Earl of Segni), which produced nine popes, including Gregory IX, Alexander IV and Innocent XIII. Lotario was the nephew of Pope Clement III; his mother, Claricia Scotti (Romani de Scotti), was from the same noble Roman family.
Lotario received his early education in Rome, probably at the Benedictine abbey of St Andrea al Celio, under Peter Ismael; he studied theology in Paris under the theologians Peter of Poitiers, Melior of Pisa, and Peter of Corbeil, and (possibly) jurisprudence in Bologna, according to the Gesta (between 1187 and 1189). As Pope, Lotario was to play a major role in the shaping of canon law through conciliar canons and decretal letters.
Shortly after the death of Alexander III (30 August 1181) Lotario returned to Rome and held various ecclesiastical offices during the short reigns of Lucius III, Urban III, Gregory VIII, and Clement III, reaching the rank of Cardinal-Deacon in 1190.
As a cardinal, Lotario wrote De miseria humanae conditionis (On the Misery of the Human Condition). The work was very popular for centuries, surviving in more than 700 manuscripts. Although he never returned to the complementary work he intended to write, On the Dignity of Human Nature, Bartolomeo Facio (1400–1457) took up the task writing De excellentia ac praestantia hominis.
Celestine III died on 8 January 1198. Before his death he had urged the College of Cardinals to elect Giovanni di San Paolo as his successor, but Lotario de' Conti was elected pope in the ruins of the ancient Septizodium, near the Circus Maximus in Rome after only two ballots on the very day on which Celestine III died. He was only thirty-seven years old at the time. He took the name Innocent III, maybe as a reference to his predecessor Innocent II (1130–1143), who had succeeded in asserting the Papacy's authority over the emperor (in contrast with Celestine III's recent policy).
As pope, Innocent III began with a very wide sense of his responsibility and of his authority. During the reign of Pope Innocent III, the papacy was at the height of its powers. He was considered to be the most powerful person in Europe at the time. In 1198, Innocent wrote to the prefect Acerbius and the nobles of Tuscany expressing his support of the medieval political theory of the sun and the moon. His papacy asserted the absolute spiritual authority of his office, while still respecting the temporal authority of kings.
The Muslim recapture of Jerusalem in 1187 was to him a divine judgment on the moral lapses of Christian princes. He was also determined to protect what he called "the liberty of the Church" from inroads by secular princes. This determination meant, among other things, that princes should not be involved in the selection of bishops, and it was focused especially on the "patrimonium" of the papacy, the section of central Italy claimed by the popes and later called the Papal States. The patrimonium was routinely threatened by Hohenstaufen German kings who, as Roman emperors, claimed it for themselves. The Holy Roman Emperor Henry VI expected to be succeeded by his infant son Frederick as king of Sicily, king of the Germans, and Roman Emperor, a combination that would have brought Germany, Italy, and Sicily under a single ruler and left the patrimonium exceedingly vulnerable.[2]
The early death of Henry VI left his 3-year-old son Frederick II as king. Henry VI's widow Constance of Sicily ruled over Sicily for her young son before he reached the age of majority. She was as eager to remove German power from the kingdom of Sicily as was Innocent III. Before her death in 1198, she named Innocent as guardian of the young Frederick until he reached his maturity. In exchange, Innocent was also able to recover papal rights in Sicily that had been surrendered decades earlier to King William I of Sicily by Pope Adrian IV. The Pope invested the young Frederick II as King of Sicily in November 1198. He also later induced Frederick II to marry the widow of King Emeric of Hungary in 1209.[2]
Painting of the coat of arms of Pope Innocent III, in the "Palazzo del Commendatore", part of the Hospital of the Holy Spirit in Sassia, Rome.
Involvement in Imperial elections
Innocent was concerned that the marriage of Henry VI and Constance of Sicily gave the Hohenstaufens a claim to all the Italian peninsula with the exception of the Papal States, which would be surrounded by Imperial territory.[14]
After the death of Emperor Henry VI, who had recently also conquered the Kingdom of Sicily, the succession became disputed: as Henry's son Frederick was still a small child, the partisans of the Staufen dynasty elected Henry's brother, Philip, Duke of Swabia, king in March 1198, whereas the princes opposed to the Staufen dynasty elected Otto, Duke of Brunswick, of the House of Welf. King Philip II of France supported Philip's claim, whereas King Richard I of England supported his nephew Otto.[15]
In 1201, the pope openly espoused the side of Otto IV, whose family had always been opposed to the house of Hohenstaufen.[16]
It is the business of the pope to look after the interests of the Roman empire, since the empire derives its origin and its final authority from the papacy; its origin, because it was originally transferred from Greece by and for the sake of the papacy...its final authority, because the emperor is raised to his position by the pope who blesses him, crowns him and invests him with the empire....Therefore, since three persons have lately been elected king by different parties, namely the youth [Frederick, son of Henry VI], Philip [of Hohenstaufen, brother of Henry VI], and Otto [of Brunswick, of the Welf family], so also three things must be taken into account in regard to each one, namely: the legality, the suitability and the expediency of his election......Far be it from us that we should defer to man rather than to God, or that we should fear the countenance of the powerful....On the foregoing grounds, then, we decide that the youth should not at present be given the empire; we utterly reject Philip for his manifest unfitness and we order his usurpation to be resisted by all....since Otto is not only himself devoted to the church, but comes from devout ancestors on both sides.....therefore we decree that he ought to be accepted and supported as king, and ought to be given the crown of empire, after the rights of the Roman church have been secured."Papal Decree on the choice of a German King, 1201" [17]
The confusion in the Empire allowed Innocent to drive out the imperial feudal lords from Ancona, Spoleto and Perugia, who had been installed by Emperor Henry VI.[18] On 3 July 1201, the papal legate, Cardinal-Bishop Guido of Palestrina announced to the people, in the cathedral of Cologne, that Otto IV had been approved by the pope as Roman king and threatened with excommunication all those who refused to acknowledge him. At the same time, Innocent encouraged the cities in Tuscany to form a league, called the League of San Genesio against German imperial interests in Italy, and they placed themselves under Innocent's protection.[18]
In May 1202, Innocent issued the decree "Venerabilem", addressed to the Duke of Zähringen, in which he explained his thinking on the relation between the papacy and the Empire. This decree was afterwards embodied in the "Corpus Juris Canonici", contained the following items:
The German princes have the right to elect the king, who is afterwards to become emperor. This right was given them by the Apostolic See when it transferred the imperial dignity from the Greeks to the Germans in the person of Charlemagne.
The right to investigate and decide whether a king thus elected is worthy of the imperial dignity belongs to the pope, whose office it is to anoint, consecrate, and crown him; otherwise it might happen that the pope would be obliged to anoint, consecrate, and Crown a king who was excommunicated, a heretic, or a pagan.
If the pope finds that the king who has been elected by the princes is unworthy of the imperial dignity, the princes must elect a new king or, if they refuse, the pope will confer the imperial dignity upon another king; for the Church stands in need of a patron and defender.
In case of a double election the pope must exhort the princes to come to an agreement. If after a due interval they have not reached an agreement they must ask the pope to arbitrate, failing which, he must of his own accord and by virtue of his office decide in favour of one of the claimants. The pope's decision need not be based on the greater or less legality of either election, but on the qualifications of the claimants.[2]
Despite papal support, Otto could not oust his rival Philip until the latter was murdered in a private feud. His rule now undisputed, Otto reneged on his earlier promises and now set his sights on reestablishing Imperial power in Italy and claiming even the Kingdom of Sicily. Given the papal interest to keep Germany and Sicily apart, Innocent now supported his ward, King Frederick of Sicily, to resist Otto's advances and restore the Staufen dynasty to the Holy Roman Empire. Frederick was duly elected by the Staufen partisans.[19]
The conflict was decided by the Battle of Bouvines on 27 July 1214, which pitted Otto, allied to King John of England against Philip II Augustus. Otto was defeated by the French and thereafter lost all influence. He died on 19 May 1218, leaving Frederick II the undisputed emperor. Meanwhile, King John was forced to acknowledge the Pope as his feudal lord and accept Stephen Langton as Archbishop of Canterbury.[20]
John of England signs Magna Carta. Illustration from Cassell's History of England (1902).
Feudal power over Europe
Innocent III played further roles in the politics of Norway,[21] France, Sweden, Bulgaria, Spain and England.[20] At the request of England's King John, Pope Innocent III declared the Magna Carta annulled, resulting in a rebellion by the English Barons who did not accept this action.[22]
Crusades and suppression of heresy
Innocent launched the Albigensian Crusade against the Cathars.
Innocent III was a vigorous opponent of religious dissent, perceived as heresy, and undertook campaigns against it. At the beginning of his pontificate, he focused on the Albigenses, also known as the Cathars, a sect that had become widespread in southwestern France, then under the control of local princes, such as the Counts of Toulouse. The Cathars rejected the authority and the teachings of the Catholic Church, and what they viewed in it as corrupt.[23] In 1198, Innocent III dispatched a monk named Rainier to visit France with the power to excommunicate heretics, and orders to local temporal authorities to confiscate the lands of heretics or to "as became Christians to deal with them more severely."[24]
The murder of Pierre de Castelnau – Innocent's legate – in 1208, by unknown assailants commonly believed to be friends of Count Raymond of Toulouse (who was not a Cathar), caused Innocent to change his methods from words to weapons. Innocent called upon King Philip II Augustus of France to suppress the Albigenses. The Crusade was prosecuted primarily by the French crown and promptly took on a political flavor, resulting in not only a significant reduction in the number of practicing Cathars, but also a realignment of the County of Toulouse in Languedoc, bringing it into the sphere of the French crown and diminishing the distinct regional culture and high level of influence of the Counts of Barcelona. Under the leadership of Simon de Montfort, 5th Earl of Leicester, a campaign was launched. The Albigensian Crusade, which led to the slaughter of approximately 20,000[25] men, women and children, Cathar and Catholic alike[25] and brought the region firmly under the control of the king of France. It was directed not only against heretical Christians, but also the nobility of Toulouse and vassals of the Crown of Aragon. King Peter II of Aragon was directly involved in the conflict, and was killed in the course of the Battle of Muret in 1213. The conflict largely ended with the Treaty of Paris of 1229, in which the integration of the Occitan territory in the French crown was agreed upon.
Burning of the Waldensians. Toulouse in the 13th century.
Pope Innocent III spent a majority of his tenure as Pope (1198–1216) preparing for a great crusade on the Holy Land. His first attempt was the Fourth Crusade (1202–1204) which he decreed in 1198.[26][27] Unlike past popes, Innocent III displayed interest in leading the crusade himself, rather than simply instigating it and allowing secular leaders to organize the expedition according to their own aspirations.[25]
Innocent III's first order of business in preaching the crusade was to send missionaries to every Catholic state to endorse the campaign. Innocent III sent Peter of Capua to the kings France and England with specific instructions to convince them to settle their differences. As a result, in 1199, Innocent was successful in forging a truce of five years between the two nations. The intent of the truce between the kings was not to allow them to lead the crusade, but rather to improve the likelihood that they would provide assistance. For the army's leadership, Innocent aimed his pleas at the knights and nobles of Europe.[25] The pleadings were successful in France, where many lords answered the pope's call, including the army's two eventual leaders, Theobald of Champagne and Boniface, marquis of Montferrat. Innocent III's calls to action were not received with as much enthusiasm in England or Germany. For this reason, the Fourth Crusade became mainly a French affair.[28]
The Fourth Crusade was an expensive endeavor. Innocent III chose to raise funds by doing something previously unheard of in popes. He forced the entire clergy under his leadership to give one fortieth of their income in support of the Crusade. This marked the first time a pope ever imposed a direct tax on his clerical subjects. The pope faced many difficulties with collecting this tax, including corruption of his own officials and disregard by his subjects in England. He continued in his attempt to garner funds for his crusade by sending envoys to King John of England and King Philip of France. Both men pledged to contribute one fortieth of their own salaries to the campaign[dubious – discuss][citation needed]. John also declared that the tax would be collected throughout England as well. The other source of funds for the crusade was the crusaders themselves. Innocent declared that those who took the vow to become crusaders but could no longer perform the tasks that they had promised to complete, could be released of their oaths by a contribution of funds to the original cause. The pope put Archbishop Hubert Walter in charge of collecting these dues.[25][29]
At the onset of the crusade, the intended destination was Egypt, as the Christians and Muslims were under a truce at the time.[28] An agreement was made between the French Crusaders and the Venetians. The Venetians would supply vessels and supplies for the crusaders and in return, the crusaders would pay 85,000 marks (£200,000).[30] Innocent gave his approval of this agreement under two conditions: a representative of the pope must accompany the crusade, and the attack of any other Christians was strictly forbidden. The French failed to raise sufficient funds for payment of the Venetians. As a result, the Crusaders diverted the crusade to the Christian city of Zara at the will of the Venetians to subsidize the debt. This diversion was adopted without the consent of Innocent III, who threatened excommunication to any who took part in the attack. A majority of the French ignored the threat and attacked Zara, and were excommunicated by Innocent III, but soon were forgiven so as to continue the crusade. A second diversion then occurred when the crusaders decided to conquer Constantinople, the capital of the Byzantine Empire. This diversion was taken without any knowledge by Innocent III, and he did not learn of it until after the city had been captured.[31]
Innocent viewed the capture of Constantinople as a way to reunite the schismatic Catholic and Eastern Orthodox Churches. The pope excommunicated the Crusaders who attacked Christian cities, but was unable to halt or overturn their actions. Erroneously, he felt that the Latin presence would bring about a reconciliation between the Eastern and Western Churches. His tactics ultimately failed due to the significant differences between the two churches. The crusade did lead to the start of the Latin Empire's rule of Constantinople, which lasted for the next sixty years.[32]
The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.
Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.
The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.
INSPIRATION
In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.
ARCHITECTURE AND DESIGN
The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.
TOMB
The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.
The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.
The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.
The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.
The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.
EXTERIOR DECORATIONS
The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.
The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.
Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.
On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.
INTERIOR DECORATION
The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.
Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.
The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."
GARDEN
The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.
Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.
Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.
OUTLYING BUILDINGS
The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.
The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.
At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.
CONSTRUCTION
The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.
The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.
According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.
The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.
LATER DAYS
Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.
By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.
THREATS
In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.
More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.
Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.
TOURISM
The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.
The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.
The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.
MYTHS
Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.
No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.
Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.
In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.
WIKIPEDIA
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
Cunliffe-Owen Aircraft was a British aircraft manufacturer of the World War II era. They were primarily a repair and overhaul shop, but also a construction shop for other companies' designs, notably the Supermarine Seafire. But the company also undertook contract work for the Air Ministry, Lord Rootes, Shorts and Armstrong Siddeley worth £1.5 million, and undertook design and development work.
The Marlin torpedo bomber was designed by Cunliffe-Owen Aircraft to Admiralty Specification O.5/43 as a replacement for the carrier-based Fairey Barracuda in the torpedo/dive bomber role for the new Malta Class ships. Cunliffe-Owen’s engineers had been convinced that a state-of-the-art torpedo bomber would have to be a fast and agile aircraft, so the airframe’s dimensions remained as compact as possible – and in fact the resulting aircraft was not bigger than the Barracuda, even though it was more massive in order to make room for an internal bomb bay. Much attention was given to aerodynamic and weight refinements, so that the aircraft – despite its considerable size – would still perform well with a single engine.
The primary choice fell on the Bristol Centaurus and the aircraft was expected to achieve 370 mph (600 km/h) top speed. Other engines with a similar output, e .g. the R-2800 and R-3350 from the USA as well as the British, air-cooled Exe 45 24 cylinder inline engine, were considered, too. However, the American export engines had been reserved for domestic use and the Exe was, at the time of the aircraft’s design, still far from being a reliable engine in the 3.000 hp class.
The Cunliffe-Owen Marlin was a conservative two-seat, mid monoplane aircraft design. As the Marlin was intended for carrier service, it came complete with hinged wing sections to allow for folding, as well as an arrester hook and a sturdy landing gear. The wings had a pronounced inverted gull wing design, so that the wings’ main spars could be positioned between the bomb bay and the cockpit floor and the landing gear struts could be kept as short as possible.
Even though the new Malta Class ships would allow bigger aircraft to be stored and deployed, the Cunliffe-Owen design team was cautious and tried to keep the aircraft as compact as possible – also with hindsight to the aircraft’s overall performance. In order to achieve this goal and set the Marlin apart from its Fairey and Supermarine contenders, the designers decided at a very early stage to limit the biggest size driver: the internal bomb bay. On the Marlin, it was not to be long enough to carry an 18” torpedo internally. The effects were dramatic: the Spearfish, for instance, had a wingspan of more than 60 ft (18m) and had a MTOW of more than 10 tons, while the Marlin had only a wing span of less than 50 ft and weighed only 25% less.
Instead of carrying the torpedo internally, a ventral arrangement, offset to port, allowed for the external carrying of a single 18” torpedo under the fuselage or of up to two 1.000 lb bombs in tandem. Alternatively, a single 1.000 lb bomb could be carried internally on a swing arm that would clear the bomb in a dive from the propeller arc. When dropped in free fall, up to four 500 lb. bombs or four 450 lb (205 kg) depth charges could be carried internally. Other options included a photo camera pallet for reconnaissance duties and/or auxiliary fuel tanks.
Hardpoints under the outer wings allowed the carriage of more iron bombs, mines or depth charges of up to 500 lb caliber, 90 gal drop tanks, or up to sixteen unguided 3” missiles for attack purposes. The Marlin’s total ordnance load was 3,000 lb (1,361 kg).
Additionally, two forward-firing, fixed 20mm cannons were mounted in the leading wing edges while a defensive, remote-controlled Frazer-Nash FN95 dorsal barbette with two 0.5” (12.7 mm) machine guns was mounted behind the rear cockpit position for defense, being operated by the navigator.
In August 1943, Cunliffe-Owen received an order for two Marlin T.1 prototypes. The first prototype, serial number RA359, was constructed at Cunliffe-Owen's Southampton Airport factory and first flew on 5 July 1945. The second prototype did not fly until late 1946 and was earmarked for the integration of a surface-search radar.
Test pilot and naval aviator Captain Eric Brown evaluated the first prototype at the Royal Navy Carrier Trials Unit at RNAS Ford, Sussex, and found "the controls in cruising flight were relatively heavy, but the aircraft responded well to stick input, and it is fast – despite its ponderous looks.” The Marlin also lacked any sort of stall warning, which would have been a problem in operational use as the stall and approach speeds were fairly close. For the landing, the aircraft proved quite docile, though.
The later prototype had, as an interim measure, ailerons boosted by hydraulic power and artificial feel to the stick from a spring. But during tests Brown found that "the second prototype was much less the pleasant aircraft to fly as the stick continually hunted either side of neutral and there was no build-up of stick force with increase in speed." Several improvements had to be made to the airframe, but no major flaws were discovered. In addition, the flaps were to be enlarged and lateral control was to be provided by spoilers with small "feeler" ailerons.
In the meantime, the strategic developments in the Pacific theatre of operations had changed. In 1945 the original order of four Malta Class ships from 1943 for the Royal Navy had been cancelled, even before they were laid down, and with this cancellation the Fleet Air Arm no longer had a requirement for new torpedo bombers. The whole program was cancelled, including the Marlin’s main competitor, the Fairey Spearfish, which was only built as a prototype.
However, the Marlin’s good performance so far and its relatively compact dimensions and high performance saved it from complete cancellation. The type was now regarded rather as an attack aircraft that would complement the Hawker Sea Fury fighter, another late WWII design. Some refinements like a new exhaust system and a fully retractable tail wheel were integrated into the serial production and the updated type’s designation was changed into SR.2 in order to reflect its changed role. The torpedo bomber capability was kept, even though only as a secondary role.
Originally, production orders for 150 aircraft were placed to be built at Southhampton, starting in late 1944. The first ten aircraft were still finished to the T.1 specification and used a Bristol Centaurus IX 18-cylinder radial engine, 2,520 hp (1,880 kW) radial engine. Then production switched to the TR.2, but instead of fulfilling the complete order, just a scant 114 TR.2 production aircraft, all outfitted with a 2,825 hp (2,107 kW) Centaurus 57 engine, followed. Some were outfitted with an ASV Mk.XV surface-search radar, mounted in a pod under the outer starboard wing, but all of them came too late to see any action in the Pacific.
After the Second World War, the Marlin remained in front line service with the Fleet Air Arm until the mid-1950s, but soon after World War II, anti-aircraft defenses were sufficiently improved to render aerial torpedo attacks suicidal. Lightweight aerial torpedoes were disposed or adapted to small attack boat usage, and the only significant employment of aerial torpedoes was in anti-submarine warfare.
Nevertheless, British Marlins got actively involved in several battles. For instance, the type carried out anti-shipping patrols and ground strikes off various aircraft carriers in the Korean War, and the Royal Navy successfully disabled the Hwacheon Dam in May 1951 with aerial torpedoes launched from Marlin fighter bombers - this raid constituted the last time globally that an aerial torpedo was used against a surface target, and was the only time torpedoes were used in the Korean War. The Marlin also served in the ground-attack role during the Malayan Emergency between 1951 and 1953.
The Marlin’s FAA front line career ended in late 1954 with the introduction of the Fairey Gannet. By that time, Cunliffe-Owen had already been, due to huge losses in the Post-War civil aviation market, dissolved since 1947.
General characteristics:
Crew: two
Length: 39 ft 7 1/2 in (12.10 m)
Wingspan: 47 ft 3 in (14.40 m)
Height: 13 ft 4.5 in (4.07 m)
Wing area: 35.40 m² (381.041 ft²)
Empty weight: 10,547 lb (4,794 kg)
Max. takeoff weight: 16,616 lb (7,553 kg)
Fuel capacity: 409 imperial gallons (1,860 l; 491 US gal)
Powerplant:
1× Bristol Centaurus 57 18-cylinder radial engine, 2,825 hp (2,107 kW)
driving a 5-bladed Rotol VH 65, 14 ft (4.3 m) diameter propeller
Performance:
Maximum speed: 540 km/h (293 kn, 335 mph)
Maximum range: 900 mi (783 nmi, 1,450 km)
Combat radius: 349 mi (303 nmi; 562 km)
Service ceiling: 31,600 ft (9,630 m)
Rate of climb: 2,600 ft/min (13 m/s)
Time to altitude: 7.75 minutes to 10,000 feet (3,048 m)
Wing loading: 158.9 kg/m² (32.5 lb/ft²)
Power/mass: 240 W/kg (0.147 hp/lb)
Armament:
2× 20 mm (0.79 in) Hispano autocannon in the outer wings
2× 0.50 in (12.7 mm) M2 Browning machine guns in a dorsal, remote-controlled
Frazer-Nash FN95 barbette
1× 1,850 lb (840 kg) 18” Mk. VXII torpedo or 2 × 2,000 lb (910 kg) bombs under the fuselage,
or up to 2.000 lb of bombs in an internal bomb bay
Alternatively, up to 16× RP-3 rocket projectiles, bombs or 2× 90 gal (408 l) drop tanks
on underwing hardpoints; total ordnance load of up to 3,000 lb (1,361 kg)
The kit and its assembly:
This converted Aichi B7A2 was inspired by a whiffy Royal Navy skin for this type for a flight simulator, found at warthunder.com and created/posted by a user called byacki. The aircraft was otherwise unchanged, but the result looked so convincing that I earmarked the idea for a hardware build.
This time has come now: the 2018 “RAF Centenary” Group Build at whatifmodelers.com was a neat occasion to tackle the project, since I already had stashed away a Fujimi kit for this build.
In fact, Cunliffe-Owen submitted a competitive proposal for the Spearfish’s requirement, but details concerning the respective aircraft remain obscure, so that the B7A2 fills this gap well. The Fujimi kit itself is VERY nice, well detailed and goes together like a charm. In order to stay true to the original inspiration I did not change much, but the Fairey Spearfish of the late WWII era had some influence.
First of all, the engine was changed into a Bristol Centaurus – a very simple rhinoplasty, since the B7A2’s front fuselage diameter turned out to be ideal for this swap! The original nose was cut off just in front of the exhaust stubs, and a Centaurus from a PM Model Sea Fury was mounted in its place – even though it had to be “squashed” a little in order to fit properly (achieved through the use of a screw clamp and 2C putty inside to stabilize the new shape). Inside of the new cowling, a styrene tube was added for the new five blade propeller, also form a Sea Fury, which received a metal axis.
Another addition is the gun barbette, a common feature among Admiralty Specification O.5/43 designs (the Fairey Spearfish carried one, too). I was lucky to find a leftover chin turret from an Airfix B-17G in the pile, which fitted well in shape and size. The casing ejector openings were faired over and then the turret was mounted upside down in a round opening at the end of the cockpit section. Cockpit floor and canopy were modified accordingly and the result does not look bad at all! Inside of the cockpit the OOB bucket seats were replaced by bigger alternatives – the Fujimi parts look like 1:100 scale!
The OOB torpedo was retained and I added some unguided 3” rockets under the aircraft’s wings, left over from my recent Sea Hawk trainer build. Another addition is a radar pod under the port side wing (a modified cardboard drop tank from a WWII P-51D), and the main wheels were changed – from a Matchbox Me 262, because they feature more details than the OOB parts. The tail wheel was modified, too: instead of the B7A2’s fixed wheel, I implanted the front wheel from a PZL Iskra and added covers, for a retractable arrangement.
Painting and markings:
Well, a conservative choice, and since I wanted to stay true to the original CG design, I stuck to classic RN colors in the form of Extra Dark Sea Grey (Humbrol 123) for the upper surfaces and Sky (Tamiya XF-76 IJN Green Grey, which is a very similar, yet slightly darker tone) for the undersides, with a high waterline. A personal twist came through Korean War era “invasion stripes”, which were carried for easy identification esp. by propeller-driven aircraft in order to avoid friendly AA fire from the ground. The stripes were created after basic painting with white and black generic decal sheet material (TL Modellbau): large white bands (32 mm wide) as foundation, with single black bands (each 6.4 mm wide) added on top. Application around the radar pod and on the slightly tapered fuselage was a bit tricky, but IMHO still easier than trying to mask and paint the stripes.
Other markings were puzzled together from a PrintScale Fairey Firefly sheet, from different Korean War era aircraft.
As per usual, the kit received a light black ink wash in order to emphasize the engraved surface details, and then the panels were highlighted through dry-brushing. Lightly chipped paint was simulated with dry-brushed silver and light grey, and gun and exhaust soot were created with grinded graphite.
Finally, everything was sealed under a mix of Italeri’s matt and semi-gloss acrylic varnishes, for a sheen finish.
I am astonished how natural the Japanese B7A2 from late WWII looks in Royal Navy colors – even without my minor modifications the aircraft would look very convincing, even as a post-war design. It’s really an elegant machine, despite its bulk and size!
The Centaurus with its five blade propeller, the missiles under the wings and the gun barbette just add some more muscle and post-war credibility. I could also imagine this elegant aircraft in WWII Luftwaffe markings, maybe with an engine swap (BMW 801 or Jumo 213 power egg), too?
The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.
Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.
The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.
INSPIRATION
In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.
ARCHITECTURE AND DESIGN
The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.
TOMB
The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.
The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.
The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.
The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.
The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.
EXTERIOR DECORATIONS
The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.
The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.
Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.
On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.
INTERIOR DECORATION
The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.
Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.
The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."
GARDEN
The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.
Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.
Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.
OUTLYING BUILDINGS
The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.
The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.
At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.
CONSTRUCTION
The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.
The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.
According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.
The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.
LATER DAYS
Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.
By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.
THREATS
In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.
More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.
Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.
TOURISM
The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.
The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.
The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.
MYTHS
Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.
No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.
Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.
In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.
WIKIPEDIA
#blackandwhite #noiretblanc #japan #japon #tokyo #building #minimalism #simplicity #discretion #refinement #architecture #nikon #nikonemmad #minimalisme
Further refinement or destruction (depending on your point of view) of an image according to the principles of Dadaism art. Felt like I cheated by dumping the overhead shot, so I cloned a player from it into the ball in Eva's mouth. Also modified one of the board advertisements, and let a little colour back in. More absurd, but I'm not sure if its better or not.
The rest of the set is here. www.flickr.com/gp/46709051@N03/4X942h
The first round on this image is linked in the comments.
I've done some minor refinements to my Leo 2A7 lately - the most noticable being the slightly modified front end.
Land Rover and renowned Magnum photographer Jonas Bendiksen have revealed the first in a series of unique works entitled ‘Ultimate Vistas’, extraordinary landscape photographs captured with help from the world’s ultimate SUV: the Range Rover.
Tea represents the most refined expression of moroccan hospitality, it is often accompanied by moroccan pastry, known for its refinement and diversity.
DISCLAIMER
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
The Chinese J-7FS was a direct descendant of the J-7E. The Chengdu J-7 itself has a long heritage of development, even though it is originally a Soviet design, a license-built MiG-21F, which has its roots in the mid 50ies.
It took China long way to develop and produce a true supersonic fighter aircraft: in March, 1964, Shenyang Aircraft Factory began the first domestic production of the J-7 jet fighter. However, the mass production of the aircraft, which had been developed through Soviet help, license production and reverse-engineering, was severely hindered by an unexpected problem—the Cultural Revolution. This incident and its consequences resulted in poor initial quality and slow progress.
This, in turn, resulted in full scale production only coming about in the 1980s, by which time the J-7 design was showing its age. However, through the years the J-7 saw constant development and refinement in China, and the J-7FS was one of the many directions the simple, basic design went in order to imporve performance and to keep it up to date.
The J-7FS was designed in the late 90ies as a dedicated interceptor, and as a lighter option than the twin-engined J-8 fighter of indigenous design. Main task was to incorporate a true air-to-air radar with surveillance capabilities, since the J-7 only featured a rader-based range finder in the central shock cone of the air intake.
Fitting a more capable radar required a larger radome, which meant either a bigger central shock cone (as in the 2nd generation MiG-21 fighters) or a totally new nose and air intake arrangement. The accordingly modified J-7FS saw first daylight as a technology demonstration aircraft built by CAC. Its most prominent feature was a redesigned under-chin inlet, reminiscent of the F-8 or A-7 nose, which provided air for a WP-13IIS engine. Above the air intake, a fixed conical radome offered space for a bigger radar dish. “139 Red”, how the first aircraft was coded, first flew in June 1998, starting a 22-month test program. Two prototypes were built, but only the first aircraft was to fly – the second machine was only used for static tests.
"139 Red" soon saw major progress in design and equipment: it received a new double-delta wing which nearly doubled internal fuel capacity and improved performance, a modified fin, a more potent WP-13F turbojet engine, and a new 600 mm slot antenna planar array radar using coherent technology to achieve scan, look-down and shoot-down capabilities.
The revamped aircraft also received a sand/green camouflage paint scheme, less flashy than the original white/red livery. The new wing, which was also introduced on the J-7E, made the aircraft 45% more maneuverable than the MiG-21F-like J/F-7M, while the take-off and landing distance is reduced to 600 meters, in comparison to the 1.000 meter take-off distance and 900 meter landing distance of earlier versions of the J-7.
The production J-7FS which was ready for service in summer 2000 featured even more changes and novelties: the J-7FS incorporated HOTAS, which has since become standard on other late J-7 versions, too. This version is also the first of J-7 series to be later upgraded with helmet mounted sights (HMS). However, it is reported that the helmet mounted sight is not compatible with radars, and air-to-air missiles must be independently controlled by either HMS or radar, but not both.
The serial production radome now had an ogival shape with an even larger base diameter, and for additional avionics such as weapon management, global positioning and flight data recording systems, the production J-7FS featured a bulged spine, reminiscent of the 3rd generation MiG-21 (or the respective Chengdu J-7C, a reverse-engineered MiG-21MF). The aircraft was even able to carry medium range AAMs, e .g. the Chinese PL-11 missile, a license-built Selenia Aspide AAM from Italia, itself a modernized descendant of the venerable AIM-7 Sparrow. Another feature which set the FS version apart was the ventral, twin-barreled Type 23-III gun instead of the single-barelled 30mm cannon at the flank.
The role of the J-7FS in the People's Liberation Army was to provide local air defense and tactical air superiority, even though it certainly was only a stop-gap until the introduction of the much more potent Chengdu J-10, which started to enter PLAAF service in 2005 after a long development time. With its more powerful radar the J-7FS was supposed to act as a kind of mini AWACS platform, guiding groups of less potent J-7Es to potential targets. It is known that the J-7FS’s new radar had a range greater than 50 km and could track up to eight targets simultaneously. The aircraft's overall performance is expected to be similar to early F-16 variants.
The number of built specimen is uncertain, but it is supposed to be less than 100, probably even less than 50. It is rumored that the type had also been offered to Bangladesh and Sri Lanka around 2001, but was not bought.
General characteristics:
Crew: 1
Length: 14.885 m (Overall) (48 ft 10 in)
Wingspan: 8.32 m (27 ft 3½ in)
Height: 4.11 m (13 ft 5½ in)
Wing area: 24.88 m² (267.8 ft²)
Aspect ratio: 2.8:1
Empty weight: 5,292 kg (11.667 lb)
Loaded weight: 7,540 kg (16.620 lb)
Max. take-off weight: 9.100 kg (20.062 lb)
Powerplant:
1 × Guizhou Liyang WP-13F(C) afterburning turbojet with 44.1 kN (9.914 lb) dry thrust and 66.7 kN (14.650 lb) with afterburner:
Performance
Maximum speed: Mach 2.0, 2,200 km/h (1.189 knots, 1.375 mph)
Stall speed: 210 km/h (114 knots, 131 mph) IAS
Combat radius: 850 km (459 nmi, 528 mi) (air superiority, two AAMs and three drop tanks)
Ferry range: 2,200 km (1.187 nmi, 1.367 mi)
Service ceiling: 17,500 m (57.420 ft)
Rate of climb: 195 m/s (38.386 ft/min)
Armament:
1× twin-barreled Type 23-III 23mm (0.9") cannon with 250 rounds under the fuselage;
5× hardpoints (4× under-wing, 1× centerline under-fuselage) with a capacity of 2,000 kg maximum (up to 500 kg each); Ordnance primarily comprises air-to-air missiles, including PL-2, PL-5, PL-7, PL-8, PL-9 and PL-11 AAMs, but in a secondary CAS role various rocket pods an unguided bombs of up to 500kg caliber could be carried
The kit and its assembly:
This whif is based on the real world J-7FS, which actually flew but never made it beyond the technical demonstrator stage. However, I found the air intake design with its raked shape and the pointed radome interesting, and since I had a crappy Matchbox MiG-21MF with misprinted decals in store I decided to use that kit for a whif conversion. There’s even a resin kit of the first J-7FS (still with the standard delta wing, though, and horribly expensive) available, but I wanted to create a more advanced what-if model, if the type had somehow entered service.
The kit saw major modification all around the fuselage: the wing tips were clipped and scratch-built ends for the J-7E double delta wing shape attached. The shape is certainly not correct, but it's IMHO the impression that counts. The MiG-21MF's deep fin was replaced by a donation part from an F-16 – the 2nd J-7FS already featured a distinctive kink at the fin’s top which made it already look rather F-16ish, and the taller and more slender fin suits the MiG-21 well.
A brake parachute housing with a disctinctive, blunt end was added just above the jet exhaust, and some antennae and pitots were added in order to enhance the bleak Matchbox kit a little. The Type 23-III cannon was sculpted from a piece of sprue, just like the brake parachute housing.
The nose section/radome is the front half of an F-18 drop tank. An oval, tapered piece of styrene was implanted as the raked intake lip, trying to copy the look of the real thing according to the few pictures I had at hand. I also added a central splitter in the air intake, which houses the front wheel bay.
Some putty work was necessary to blend the new nose into the front fuselage, as well as the dorsal spine into the new fin, but that turned out to be easier than expected.
The jet exhaust originally is just a vertical "plate" in the MiG-21's tail. I opened it and implanted a new cover inside of the fuselage, in a deeper position. For some more detail I also added a (simple) jet nozzle, IIRC it is a leftover part from a Matchbox Jaguar kit, probably 30 years old... Not much, but it defininitively enhances the rear view of the machine.
The original cockpit only consists of a bulky seat and the pilot figure, and the clear canopy is clear but horribly thick. Hence, I decided to keep the cockpit closed, but nevertheless I added a floor and some side panels, and used an Airfix pilot figure.
The missile ordnance comes from the scrap box, reflecting “modern” Chinese air-to-air weaponry: two PL-7 (Matra Magic AAMs from an Italeri NATO weapons kit) on the outer and two PL-11 (two Aspide missiles from the same set ) on the inner wing hardpoints. All wing hardpoints come from MiG-21F kits, one pair is from the Academy kit, the other from the vintage Hasegawa kit, both have the launch rails molded into the weapon pylon. The drop tank is a typical Chinese item - it resembles the Russian/soviet PTB-490 drop tank, but has a more blunt nose and smaller fins - it comes from a FC-1 kit from Trumpeter.
Paintings and markings:
Since it is an air superiority aircraft, I wanted an appropriate livery, but not the dull overall grey of contemporary PLAAF fighters. But I found some weird real life paint schemes which inspired the final camouflage.
Since the plane was not supposed to look too American through FS tones I rather used 'other' colors for a wraparound scheme. The basic tone is Testors 2123 (Russian Underside Blue), and from above a darker contrast color was added, Humbrol 230 (PRU Blue). Both tones have a greenish/teal hue, which complements each other well. Together they create a pretty distinctive look, though, esp. with the red and yellow insignia and codes. IMHO these colors suit the fighter well.
The kit received a light black ink wash and some dry painting with lighter blue-grey shades (Humbrol 87 and 128), but no weathering, since modern Chinese aircraft tend to look pretty clean and pristine.
The decals were puzzled together from the scrap box, IIRC the insignia originally they belong to a Il-28 Trumpeter kit. The 5 digit code comes from a Revell MiG-29 and the number itself is based on the information published in the 2010 book “Chinese Air Power” by Yefim Gordon und Dmitriy Komissarov, where the Chinese code system is explained – I hope that it is more or less authentic ;)
So, all in all a rather simple kit conversion, and certainly not a creative masterpiece. To be honest, the similarity with the real thing is just at first glance - but since it is whif world, I am fine with the outcome. ^^
The 1968 Mustang was little changed on the outside from it 1967 counterpart apart from the obvious side reflectors that were now mandated. Most of the changes were in subtle refinements to the interior and exterior that most people didn’t notice. Cosmetically they had different simulated side scoops. The 1968 scoop looked more like a vertical “C” whereas the 1967 looked like air intake openings.
Other changes included the deletion of the horizontal grille bars. The grille featured a running Mustang inside a corral in the center of the grille. There was also the deletion of the F-O-R-D letters at the front of the hood, simplification of the quarter panel ornament, and many safety features (increasing governmental regulations).
The 325 bhp, 390 cid engine was now a new “FE” block and 11,475 buyers stepped up for that motor. On the interesting end of the spectrum, the top engine option was a low riser version of Ford’s 427 cid V8, only available with an automatic transmission and only until December 1967. It was rated at 390 bhp and cost a whopping $622. Very few were sold; look for a W in the VIN. This gas drinking monster sported a 600 CFM (too small) carburetor.
The Taj Mahal (/ˌtɑːdʒ məˈhɑːl/, more often /ˈtɑːʒ/; from Persian and Arabic, "crown of palaces", pronounced [ˈt̪aːdʒ mɛˈɦɛl]) is a white marble mausoleum located on the southern bank of Yamuna River in the Indian city of Agra. It was commissioned in 1632 by the Mughal emperor Shah Jahan (reigned 1628–1658) to house the tomb of his favorite wife of three, Mumtaz Mahal.
Construction of the mausoleum was essentially completed in 1643 but work continued on other phases of the project for an additional ten years. The Taj Mahal complex is believed to have been completed in its entirety in 1653 at a cost estimated at the time to be around 32 million Indian rupees, which in 2015 would be valued at around 52.8 billion Indian rupees ($827 million US). The construction project employed around 20,000 artisans under the guidance of a board of architects led by Ustad Ahmad Lahauri. The domed marble tomb is part of an integrated complex consisting of gardens and two red-sandstone buildings surrounded by a crenellated wall on three sides.
The Taj Mahal is regarded by many as the best example of Mughal architecture and is widely recognized as "the jewel of Muslim art in India". It is one of the world’s most celebrated structures and a symbol of India’s rich history. Designated a UNESCO World Heritage Site in 1983, the Taj Mahal attracts some 3 million visitors a year.
INSPIRATION
In 1631, Shah Jahan, emperor during the Mughal empire's period of greatest prosperity, was grief-stricken when his favorite of three wives and beloved companion, Mumtaz Mahal, a Persian princess, died during the birth of their 14th child, Gauhara Begum. Construction of the Taj Mahal began in 1632. The court chronicles of Shah Jahan's grief illustrate the love story traditionally held as an inspiration for Taj Mahal. The principal mausoleum was completed in 1643 and the surrounding buildings and garden were finished about five years later.
ARCHITECTURE AND DESIGN
The Taj Mahal incorporates and expands on design traditions of Persian and earlier Mughal architecture. Specific inspiration came from successful Timurid and Mughal buildings including; the Gur-e Amir (the tomb of Timur, progenitor of the Mughal dynasty, in Samarkand), Humayun's Tomb, Itmad-Ud-Daulah's Tomb (sometimes called the Baby Taj), and Shah Jahan's own Jama Masjid in Delhi. While earlier Mughal buildings were primarily constructed of red sandstone, Shah Jahan promoted the use of white marble inlaid with semi-precious stones. Buildings under his patronage reached new levels of refinement.
TOMB
The tomb is the central focus of the entire complex of the Taj Mahal. It is a large, white marble structure standing on a square plinth and consists of a symmetrical building with an iwan (an arch-shaped doorway) topped by a large dome and finial. Like most Mughal tombs, the basic elements are Persian in origin.
The base structure is a large multi-chambered cube with chamfered corners forming an unequal eight-sided structure that is approximately 55 metres on each of the four long sides. Each side of the iwan is framed with a huge pishtaq or vaulted archway with two similarly shaped arched balconies stacked on either side. This motif of stacked pishtaqs is replicated on the chamfered corner areas, making the design completely symmetrical on all sides of the building. Four minarets frame the tomb, one at each corner of the plinth facing the chamfered corners. The main chamber houses the false sarcophagi of Mumtaz Mahal and Shah Jahan; the actual graves are at a lower level.
The most spectacular feature is the marble dome that surmounts the tomb. The dome is nearly 35 metres high which is close in measurement to the length of the base, and accentuated by the cylindrical "drum" it sits on which is approximately 7 metres high. Because of its shape, the dome is often called an onion dome or amrud (guava dome). The top is decorated with a lotus design which also serves to accentuate its height. The shape of the dome is emphasized by four smaller domed chattris (kiosks) placed at its corners, which replicate the onion shape of the main dome. Their columned bases open through the roof of the tomb and provide light to the interior. Tall decorative spires (guldastas) extend from edges of base walls, and provide visual emphasis to the height of the dome. The lotus motif is repeated on both the chattris and guldastas. The dome and chattris are topped by a gilded finial which mixes traditional Persian and Hindustani decorative elements.
The main finial was originally made of gold but was replaced by a copy made of gilded bronze in the early 19th century. This feature provides a clear example of integration of traditional Persian and Hindu decorative elements. The finial is topped by a moon, a typical Islamic motif whose horns point heavenward.
The minarets, which are each more than 40 metres tall, display the designer's penchant for symmetry. They were designed as working minarets - a traditional element of mosques, used by the muezzin to call the Islamic faithful to prayer. Each minaret is effectively divided into three equal parts by two working balconies that ring the tower. At the top of the tower is a final balcony surmounted by a chattri that mirrors the design of those on the tomb. The chattris all share the same decorative elements of a lotus design topped by a gilded finial. The minarets were constructed slightly outside of the plinth so that in the event of collapse, a typical occurrence with many tall constructions of the period, the material from the towers would tend to fall away from the tomb.
EXTERIOR DECORATIONS
The exterior decorations of the Taj Mahal are among the finest in Mughal architecture. As the surface area changes, the decorations are refined proportionally. The decorative elements were created by applying paint, stucco, stone inlays or carvings. In line with the Islamic prohibition against the use of anthropomorphic forms, the decorative elements can be grouped into either calligraphy, abstract forms or vegetative motifs. Throughout the complex are passages from the Qur'an that comprise some of the decorative elements. Recent scholarship suggests that the passages were chosen by Amanat Khan.
The calligraphy on the Great Gate reads "O Soul, thou art at rest. Return to the Lord at peace with Him, and He at peace with you." The calligraphy was created in 1609 by a calligrapher named Abdul Haq. Shah Jahan conferred the title of "Amanat Khan" upon him as a reward for his "dazzling virtuosity". Near the lines from the Qur'an at the base of the interior dome is the inscription, "Written by the insignificant being, Amanat Khan Shirazi." Much of the calligraphy is composed of florid thuluth script made of jasper or black marble inlaid in white marble panels. Higher panels are written in slightly larger script to reduce the skewing effect when viewed from below. The calligraphy found on the marble cenotaphs in the tomb is particularly detailed and delicate.
Abstract forms are used throughout, especially in the plinth, minarets, gateway, mosque, jawab and, to a lesser extent, on the surfaces of the tomb. The domes and vaults of the sandstone buildings are worked with tracery of incised painting to create elaborate geometric forms. Herringbone inlays define the space between many of the adjoining elements. White inlays are used in sandstone buildings, and dark or black inlays on the white marbles. Mortared areas of the marble buildings have been stained or painted in a contrasting color which creates a complex array of geometric patterns. Floors and walkways use contrasting tiles or blocks in tessellation patterns.
On the lower walls of the tomb are white marble dados sculpted with realistic bas relief depictions of flowers and vines. The marble has been polished to emphasise the exquisite detailing of the carvings. The dado frames and archway spandrels have been decorated with pietra dura inlays of highly stylised, almost geometric vines, flowers and fruits. The inlay stones are of yellow marble, jasper and jade, polished and levelled to the surface of the walls.
INTERIOR DECORATION
The interior chamber of the Taj Mahal reaches far beyond traditional decorative elements. The inlay work is not pietra dura, but a lapidary of precious and semiprecious gemstones. The inner chamber is an octagon with the design allowing for entry from each face, although only the door facing the garden to the south is used. The interior walls are about 25 metres high and are topped by a "false" interior dome decorated with a sun motif. Eight pishtaq arches define the space at ground level and, as with the exterior, each lower pishtaq is crowned by a second pishtaq about midway up the wall. The four central upper arches form balconies or viewing areas, and each balcony's exterior window has an intricate screen or jali cut from marble. In addition to the light from the balcony screens, light enters through roof openings covered by chattris at the corners. The octagonal marble screen or jali bordering the cenotaphs is made from eight marble panels carved through with intricate pierce work. The remaining surfaces are inlaid in delicate detail with semi-precious stones forming twining vines, fruits and flowers. Each chamber wall is highly decorated with dado bas-relief, intricate lapidary inlay and refined calligraphy panels which reflect, in miniature detail, the design elements seen throughout the exterior of the complex.
Muslim tradition forbids elaborate decoration of graves. Hence, the bodies of Mumtaz and Shah Jahan were put in a relatively plain crypt beneath the inner chamber with their faces turned right, towards Mecca. Mumtaz Mahal's cenotaph is placed at the precise centre of the inner chamber on a rectangular marble base of 1.5 by 2.5 metres. Both the base and casket are elaborately inlaid with precious and semiprecious gems. Calligraphic inscriptions on the casket identify and praise Mumtaz. On the lid of the casket is a raised rectangular lozenge meant to suggest a writing tablet. Shah Jahan's cenotaph is beside Mumtaz's to the western side, and is the only visible asymmetric element in the entire complex. His cenotaph is bigger than his wife's, but reflects the same elements: a larger casket on a slightly taller base precisely decorated with lapidary and calligraphy that identifies him. On the lid of the casket is a traditional sculpture of a small pen box.
The pen box and writing tablet are traditional Mughal funerary icons decorating the caskets of men and women respectively. The Ninety Nine Names of God are calligraphic inscriptions on the sides of the actual tomb of Mumtaz Mahal. Other inscriptions inside the crypt include, "O Noble, O Magnificent, O Majestic, O Unique, O Eternal, O Glorious... ". The tomb of Shah Jahan bears a calligraphic inscription that reads; "He travelled from this world to the banquet-hall of Eternity on the night of the twenty-sixth of the month of Rajab, in the year 1076 Hijri."
GARDEN
The complex is set around a large 300-metre square charbagh or Mughal garden. The garden uses raised pathways that divide each of the four quarters of the garden into 16 sunken parterres or flowerbeds. Halfway between the tomb and gateway in the center of the garden is a raised marble water tank with a reflecting pool positioned on a north-south axis to reflect the image of the mausoleum. The raised marble water tank is called al Hawd al-Kawthar in reference to the "Tank of Abundance" promised to Muhammad.
Elsewhere, the garden is laid out with avenues of trees and fountains. The charbagh garden, a design inspired by Persian gardens, was introduced to India by Babur, the first Mughal emperor. It symbolises the four flowing rivers of Jannah (Paradise) and reflects the Paradise garden derived from the Persian paridaeza, meaning 'walled garden'. In mystic Islamic texts of the Mughal period, Paradise is described as an ideal garden of abundance with four rivers flowing from a central spring or mountain, separating the garden into north, west, south and east.
Most Mughal charbaghs are rectangular with a tomb or pavilion in the center. The Taj Mahal garden is unusual in that the main element, the tomb, is located at the end of the garden. With the discovery of Mahtab Bagh or "Moonlight Garden" on the other side of the Yamuna, the interpretation of the Archaeological Survey of India is that the Yamuna river itself was incorporated into the garden's design and was meant to be seen as one of the rivers of Paradise. Similarities in layout and architectural features with the Shalimar Gardens suggests both gardens may have been designed by the same architect, Ali Mardan. Early accounts of the garden describe its profusion of vegetation, including abundant roses, daffodils, and fruit trees. As the Mughal Empire declined, the Taj Mahal and its gardens also declined. By the end of the 19th century, the British Empire controlled more than three-fifths of India, and assumed management of the Taj Mahal. They changed the landscaping to their liking which more closely resembled the formal lawns of London.
OUTLYING BUILDINGS
The Taj Mahal complex is bordered on three sides by crenellated red sandstone walls; the side facing the river is open. Outside the walls are several additional mausoleums, including those of Shah Jahan's other wives, and a larger tomb for Mumtaz's favourite servant.
The main gateway (darwaza) is a monumental structure built primarily of marble, and reminiscent of the Mughal architecture of earlier emperors. Its archways mirror the shape of the tomb's archways, and its pishtaq arches incorporate the calligraphy that decorates the tomb. The vaulted ceilings and walls have elaborate geometric designs like those found in the other sandstone buildings in the complex.
At the far end of the complex are two grand red sandstone buildings that mirror each other, and face the sides of the tomb. The backs of the buildings parallel the western and eastern walls. The western building is a mosque and the other is the jawab (answer), thought to have been constructed for architectural balance although it may have been used as a guesthouse. Distinctions between the two buildings include the jawab's lack of a mihrab (a niche in a mosque's wall facing Mecca), and its floors of geometric design whereas the floor of the mosque is laid with outlines of 569 prayer rugs in black marble. The mosque's basic design of a long hall surmounted by three domes is similar to others built by Shah Jahan, particularly the Masjid-i Jahān-Numā, or Jama Masjid, Delhi. The Mughal mosques of this period divide the sanctuary hall into three areas comprising a main sanctuary and slightly smaller sanctuaries on either side. At the Taj Mahal, each sanctuary opens onto an expansive vaulting dome. The outlying buildings were completed in 1643.
CONSTRUCTION
The Taj Mahal is built on a parcel of land to the south of the walled city of Agra. Shah Jahan presented Maharajah Jai Singh with a large palace in the center of Agra in exchange for the land. An area of roughly three acres was excavated, filled with dirt to reduce seepage, and leveled at 50 metres above riverbank. In the tomb area, wells were dug and filled with stone and rubble to form the footings of the tomb. Instead of lashed bamboo, workmen constructed a colossal brick scaffold that mirrored the tomb. The scaffold was so enormous that foremen estimated it would take years to dismantle.
The Taj Mahal was constructed using materials from all over India and Asia. It is believed over 1,000 elephants were used to transport building materials. The translucent white marble was brought from Makrana, Rajasthan, the jasper from Punjab, jade and crystal from China. The turquoise was from Tibet and the Lapis lazuli from Afghanistan, while the sapphire came from Sri Lanka and the carnelian from Arabia. In all, twenty eight types of precious and semi-precious stones were inlaid into the white marble.
According to the legend, Shah Jahan decreed that anyone could keep the bricks taken from the scaffold, and thus it was dismantled by peasants overnight. A fifteen kilometer tamped-earth ramp was built to transport marble and materials to the construction site and teams of twenty or thirty oxen pulled the blocks on specially constructed wagons. An elaborate post-and-beam pulley system was used to raise the blocks into desired position. Water was drawn from the river by a series of purs, an animal-powered rope and bucket mechanism, into a large storage tank and raised to a large distribution tank. It was passed into three subsidiary tanks, from which it was piped to the complex.
The plinth and tomb took roughly 12 years to complete. The remaining parts of the complex took an additional 10 years and were completed in order of minarets, mosque and jawab, and gateway. Since the complex was built in stages, discrepancies exist in completion dates due to differing opinions on "completion". Construction of the mausoleum itself was essentially completed by 1643 while work continued on the outlying buildings. Estimates of the cost of construction vary due to difficulties in estimating costs across time. The total cost has been estimated to be about 32 million Indian rupees, which is around 52.8 billion Indian rupees ($827 million US) based on 2015 values.
LATER DAYS
Abdul Hamid Lahauri in his book Badshahnama refers to Taj Mahal as rauza-i munawwara, meaning the illumined or illustrious tomb. Soon after the Taj Mahal's completion, Shah Jahan was deposed by his son Aurangzeb and put under house arrest at nearby Agra Fort. Upon Shah Jahan's death, Aurangzeb buried him in the mausoleum next to his wife. In the 18th century, the Jat rulers of Bharatpur invaded Agra and attacked the Taj Mahal, the two chandeliers, one of agate and another of silver, which were hung over the main cenotaph, were taken away by them, along with the gold and silver screen. Kanbo, a Mughal historian, said the gold shield which covered the 15-foot high finial at the top of the main dome was also removed during the Jat despoliation.
By the late 19th century, parts of the buildings had fallen into disrepair. During the time of the Indian rebellion of 1857, the Taj Mahal was defaced by British soldiers and government officials, who chiselled out precious stones and lapis lazuli from its walls. At the end of the 19th century, British viceroy Lord Curzon ordered a sweeping restoration project, which was completed in 1908. He also commissioned the large lamp in the interior chamber, modelled after one in a Cairo mosque. During this time the garden was remodelled with British-style lawns that are still in place today.
THREATS
In 1942, the government erected a scaffolding to disguise the building in anticipation of air attacks by the Japanese Air Force. During the India-Pakistan wars of 1965 and 1971, scaffoldings were again erected to mislead bomber pilots.
More recent threats have come from environmental pollution on the banks of Yamuna River including acid rain due to the Mathura Oil Refinery, which was opposed by Supreme Court of India directives. The pollution has been turning the Taj Mahal yellow. To help control the pollution, the Indian government has set up the Taj Trapezium Zone (TTZ), a 10,400-square-kilometre area around the monument where strict emissions standards are in place.
Concerns for the tomb's structural integrity have recently been raised because of a decline in the groundwater level in the Yamuna river basin which is falling at a rate of around 5 feet a year. In 2010, cracks appeared in parts of the tomb, and the minarets which surround the monument were showing signs of tilting, as the wooden foundation of the tomb may be rotting due to lack of water. In 2011 it was reported that some predictions indicated that the tomb could collapse within 5 years.
TOURISM
The Taj Mahal attracts a large number of tourists. UNESCO documented more than 2 million visitors in 2001, which increased to about 3 million in 2015. A two tier pricing system is in place, with a significantly lower entrance fee for Indian citizens and a more expensive one for foreigners. Most tourists visit in the cooler months of October, November and February. Polluting traffic is not allowed near the complex and tourists must either walk from parking lots or catch an electric bus. The Khawasspuras (northern courtyards) are currently being restored for use as a new visitor center.
The small town to the south of the Taj, known as Taj Ganji or Mumtazabad, was originally constructed with caravanserais, bazaars and markets to serve the needs of visitors and workmen. Lists of recommended travel destinations often feature the Taj Mahal, which also appears in several listings of seven wonders of the modern world, including the recently announced New Seven Wonders of the World, a recent poll with 100 million votes.
The grounds are open from 06:00 to 19:00 weekdays, except for Friday when the complex is open for prayers at the mosque between 12:00 and 14:00. The complex is open for night viewing on the day of the full moon and two days before and after, excluding Fridays and the month of Ramadan. For security reasons only five items - water in transparent bottles, small video cameras, still cameras, mobile phones and small ladies' purses - are allowed inside the Taj Mahal.
MYTHS
Ever since its construction, the building has been the source of an admiration transcending culture and geography, and so personal and emotional responses have consistently eclipsed scholastic appraisals of the monument. A longstanding myth holds that Shah Jahan planned a mausoleum to be built in black marble as a Black Taj Mahal across the Yamuna river. The idea originates from fanciful writings of Jean-Baptiste Tavernier, a European traveller who visited Agra in 1665. It was suggested that Shah Jahan was overthrown by his son Aurangzeb before it could be built. Ruins of blackened marble across the river in Moonlight Garden, Mahtab Bagh, seemed to support this legend. However, excavations carried out in the 1990s found that they were discolored white stones that had turned black. A more credible theory for the origins of the black mausoleum was demonstrated in 2006 by archaeologists who reconstructed part of the pool in the Moonlight Garden. A dark reflection of the white mausoleum could clearly be seen, befitting Shah Jahan's obsession with symmetry and the positioning of the pool itself.
No evidence exists for claims that describe, often in horrific detail, the deaths, dismemberments and mutilations which Shah Jahan supposedly inflicted on various architects and craftsmen associated with the tomb. Some stories claim that those involved in construction signed contracts committing themselves to have no part in any similar design. Similar claims are made for many famous buildings. No evidence exists for claims that Lord William Bentinck, governor-general of India in the 1830s, supposedly planned to demolish the Taj Mahal and auction off the marble. Bentinck's biographer John Rosselli says that the story arose from Bentinck's fund-raising sale of discarded marble from Agra Fort.
Another myth suggests that beating the silhouette of the finial will cause water to come forth. To this day, officials find broken bangles surrounding the silhouette.
In 2000, India's Supreme Court dismissed P. N. Oak's petition to declare that a Hindu king built the Taj Mahal. In 2005 a similar petition was dismissed by the Allahabad High Court. This case was brought by Amar Nath Mishra, a social worker and preacher who says that the Taj Mahal was built by the Hindu King Parmar Dev in 1196.
WIKIPEDIA
The French Room was dedicated in 1943 and decorated in the Empire style of the 18th century. The refinements of the era can be seen in the golden motifs in the furniture and crown mouldings on the walls, some of which are of Greek, Egyptian and Italian influence, an indication of the military campaigns that Napoleon led in the late 18th and early 19th centuries.
xxxx
The Nationality Rooms are located in the University of Pittsburgh's Cathedral of Learning building. The rooms are gifts to the university from Pittsburgh's ethnic communities. Each room has been designed to represent the culture of the nation represented. The rooms function as university classrooms and are not open all the time for the public to explore particularly during school terms. Visitors are advised to contact the University for opening times and guided tours.
www.nationalityrooms.pitt.edu/
The very first Nationality Room opened in 1938, and new rooms are still being planned now. There are currently 30 Nationality Rooms at the Cathedral of Learning.
"Both in one's refreshments and appearance, refinement is a must in polite society."
This theme was tough for me. 'Vintage' always struck me as pertaining to wine--probably Kami no Shizuku's fault. ^________^ Otherwise, I wasn't sure. People who posted things on the theme's thread and asking friends helped a lot with this.
Unfortunately I did lose my Wednesday of working for this theme, and I couldn't print out everything I wanted to nor in the right size. Then my camera batteries died. But I showed them what's up. > 3<
Overall I'm happy with they way this turned out, if not a bit disappointed. I also don't have any extra photos this time around, and she'll be getting her acrylics finally installed and her best friend Aiden back home before we attack this photoshoot. My boyfriend is thinking piano-playing should be involved. I agree.
~~~~~~~~~~~~~~~~~~~~~~~~~~<3
This round of Dalicious was awesome, by the way~!! I'm very proud of what I threw into this competition, and seriously enjoyed so many photos these past weeks. I'm sooo excited to see how everyone ranked and who gets to wear my dresses xD"
Hora - Carpo
Anonymous
Hora-Carpo, Carrara marble, first century A.D. with mid 16th century integrations ,height 1,51 m. Florence – Galleria degli Uffizi – inv. 1914, n. 136. For more than four centuries the statue of Hora has embellished the eastern corridor of the Uffizi Gallery, standing out, among the army of marbles that decorate the Vasarian complex, for the refinement of its modelling that portrays with surprising realism the impalpable robe worn by the young woman. These “thin garments” were what most struck Giorgio Vasari when, in 1568, he saw the statue displayed in one of the rooms of Palazzo Pitti, interpreting it as a portrayal of Pomona, the Roman goddess of fruits. The grapes, pears, pomegranates and walnuts that almost spill from the folds of the cloak the woman holds in her lap, left no doubt about the character of this fascinating female personage, who must have been linked to the fertility of the earth and the generative force of nature. So this 16 century interpretation was not wholly inaccurate, though today, thanks to other examples of this kind of statue, we can more precisely identify the young woman as a Hora, one of the daughters of Zeus and Themis, goddess of justice, who watch over the natural cycles of the year.
Bringers of seasonal gifts, but also of fascination and talent for mortals, the Horae watched over the birth of men, exercising upon them a beneficial and healthy influence.
The Horae, three in number according to Hesiod (Hes.,
Theogonia, vv. 901 et seq.), were, by their life-giving nature, inevitably linked to the idea of Spring and the rebirth of nature after the rigours of winter, so much so that in the Homeric hymns
(Hom., Hymn to Ceres vv 54 and 192), it is they who bring back
Persephone to the Earth from the Underworld, thus marking
the start of the warm season. But their action was not limited to
spring fruits, it also extended to protecting and favouring crops
of other seasons, including the autumn, of which we see echoes
in the fruit chosen to nestle in the robe of the Florentine
statue.
The quality of the Uffizi marble, probably dating back to the
first century A.D., justified the intervention of an excellent 16th century sculpture to integrate the parts missing when it was discovered: the head, parts of the hands and the base. The taste
of the time did not accept the aesthetics of the fragment and it
was necessary always to restore formal unity to the damaged
ancient sculptures given back by the Earth. The draping,
which clings to the woman’s body in her rapid movement, highlights the shape of the body rather than hiding it, creating, in the lower part of the figure, a play of folds blown by the wind that
is almost a virtuoso execution with its irregular and contorted
movement. In this description of the robe, which is impalpable
and clings to the muscles like wet fabric, we cannot help recognising the echo of Attic models of the post-Phidias School,
which have in the Nike of Paionos in Olympia and in the reliefs
of the balustrade of the temple of Athena Nike on the Acropolis
in Athens their most accomplished examples. But other clues,
such as the mannered and colourful taste in portraying the
lower part of the robe, presuppose experience of an already
mature Hellenism, suggesting that a Hellenic archetype of the
third or second century BC was the prototype from which the
portrayals we know of the Horae were derived.
Among these copies, spread among the Vatican, Tarragona and Venice, the Florentine statue stands out for the sensitivity with which it portrays the lightness of the figure, which seems frozen in a dance step rather than in a normal walk. Aby Warburg, at the end of the 19th century, recognised in the sculpture the direct inspiration drawn by Sandro Botticelli for the figure of Flora portrayed in his famous Primavera. The position of the figure, the act of bringing the hands into the lap to hold the folds of the garment filled with flowers, but, above all the description of a light and ethereal robe seemed to betray a close link between this iconographic type and that portrayed in the 15th century work.
Chassis n° 16287
The Chantilly Sale
Bonhams
Sold for € 189.750
Chantilly Arts & Elegance Richard Mille
Château de Chantilly
Chantilly
France - Frankrijk
September 2017
'Each new Ferrari model brings some noteworthy advance over previous ones. The GTC/4's is mechanical refinement. Less mechanical thrash comes through from the engine room than in any previous Ferrari, and the controls are smoother and lighter than ever, making the car deliciously easy to drive well. And the lack of mechanical clatter does not deprive us of entertainment; there's just the right amount of purr from the four tailpipes, and when working hard in its upper rev range the engine sings the familiar and beautiful V12 song.' - Road & Track.
A short-lived interim model that bridged the gap between production of the 365GT 2+2 and 365GT4 2+2, the 365GTC/4 was first shown at the Geneva Motor Show in 1971. A contemporary of the awe-inspiring Daytona, the 365GTC/4 used a similar chassis and a wet-sump version of the former's 4,390cc four-cam V12 in a slightly lower - 320bhp - state of tune, which was coupled to a conventional five-speed gearbox rather than the Daytona's transaxle. Cylinder heads revised to accommodate side-draught carburettors enabled stylist Pininfarina to achieve an elegant, low profile bonnet line. 'In all, a graceful, clean and understated design with subtleties one discovers only by looking it over carefully. One might say this model is a Ferrari for the mature enthusiast,' observed R&T.
Altogether more civilised and easy to drive than the heavy Daytona, the rapid 365GTC/4 came with ZF power steering and servo-assisted brakes as standard, the option of air conditioning, and an especially luxurious interior featuring individual reclining front seats and occasional rear seats. In spite of the increasing emphasis on refinement, the 365GTC/4 gave nothing away to its rivals in the performance stakes, racing through the standing quarter mile in under 16 seconds on its way to a top speed in excess of 150mph. By the time the model was withdrawn in October 1972, production had totalled only 500 units, making the 365GTC/4 eminently collectible today.
The example offered here, chassis number '16287', is one of the last Ferrari 365GTC/4s built out of a total of 500 cars. This car is the 495th in the production sequence, and caries Pininfarina body number '492'. It was delivered new to the official Ferrari importer, Charles Pozzi in Levallois-Perret, France together with '16289', they are said to be the two last cars of the series to be delivered. This is a desirable European version, manufactured in left-hand drive configuration with instruments in km/h. The first owner, Mr Parret of Val de Marne, France, took delivery on 24th April 1974. The history file contains a copy of the Ferrari Warranty Card confirming the car was finished in Blu Ribot and delivered new to Mr Parret via Pozzi; and a copy of the Pozzi 'fiche de contrôle', which shows that the car was delivered with yellow fog lamps (obligatory in France).
The Ferrari is believed to have stayed in France, passing through the hands of several careful owners in Saone et Loire, Haute-Loire, and later Haut-Rhin. This information and early history has been traced with the help of Mr Marc Rabineau, to whom Bonhams extends its sincere thanks. The car is believed to have stayed in France until the current owner bought it in Monaco in 2009. The beautiful Bleu Ribot colour has faded slightly over the years but still presents very well, while the beautifully preserved beige leather interior appears totally original and in good condition.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The Lavochkin La-7 (Russian: Лавочкин Ла-7) was a piston-engine Soviet fighter developed during World War II by the Lavochkin Design Bureau (OKB). It was a development and refinement of the Lavochkin La-5, and the last in a family of aircraft that had begun with the LaGG-1 in 1938.
By 1943, the La-5 had become a mainstay of the Soviet Air Forces, yet both its head designer, Semyon Lavochkin, as well as the engineers at the Central Aerohydrodynamics Institute (Russian: TsAGI), felt that it could be improved upon. TsAGI refined earlier studies of aerodynamic improvements to the La-5 airframe in mid-1943 and modified La-5FN to evaluate the changes between December 1943 and February 1944 and proved to have exceptional performance.
Using the same engine as the standard La-5FN the modified aircraft had a top speed of 684 kilometers per hour (425 mph) at a height of 6,150 meters (20,180 ft), some 64 kilometers per hour (40 mph) faster than the production La-5FN. It took 5.2 minutes to climb to 5,000 meters (16,404 ft). Main change was the use of more lighter but stronger metal wing spars to save weight.
The La-5, as well as its predecessors, had been built mostly of wood to conserve strategic materials such as aircraft alloys. With Soviet strategists now confident that supplies of these alloys were unlikely to become a problem, Lavochkin was now able to replace some wooden parts with alloy components.
Combat trials began in mid-September 1944 and were generally very positive.
However four aircraft were lost to engine failures and the engines suffered from numerous lesser problems, despite its satisfactory service in the La-5FN. One cause was the lower position of the engine air intakes in the wing roots of the La-7 which caused the engine to ingest sand and dust. One batch of flawed wings was built and caused six accidents, four of them fatal, in October which caused the fighter to be grounded until the cause was determined to be a defect in the wing spar.
Production of the first aircraft fitted with three B-20 cannon began in January 1945 when 74 were delivered. More than 2000 La-7 aircraft were delivered before the war's end, and a total of 5753 aircraft until production ceded in 1946.
Still, the basic concept had more development potential, and as soon as March 1945 work on further improvements for the La-7 started, while in parallel a new type was under development - the La-9, which would enter prototype stage in 1946. An interim type was needed - and this became the La-7bis. It was based on the proven La-7, but already incorporated crucial elements of the future La-9, e. g. its laminar flow wing shape as well as an increased share of light alloy in the construction.
Overall, the La-7bis was tailored to higher operation altitudes than the standard La-7 and was intended to intercept high flying bombers and reconnaissance aircraft like the Ju 388. Therefore the interim type incorporated many small refinements and changes, most notably a bigger wing and fin area, a four-bladed propeller and a pair of new 23 mm Nudelman-Suranov NS-23 cannons which considerably improved firepower and weapon range.
The La-7bis was built in parallel to the standard La-7, but only at Zavod Nr. 99 in Ulan-Ude, where 433 aircraft were built until 1946. Only a few La-7bis reached the front units during WWII in time, and in Soviet service the type was quickly superseded by the La-9. Many aircraft were used in flying schools and training regiments, though, or quickly handed over to allies like China and Korea.
With these operators the La-7bis actively took part in the Korean War and remained in service until the mid-Sixties, when piston fighters were finally replaced by the highly successful MiG-15.
Even though a sub version of the La-7, the type received the separate Air Standardization Coordinating Committee (ASCC) code "Flake" as it was initially mistaken as a new Lavochkin type.
General characteristics
Crew: 1
Length: 8.89 m (29 ft 1 1/2 in)
Wingspan: 10,16 m (33 ft 3 in)
Height: 2.41 m (7 ft 11 in)
Wing area: 19.59 m2 (210.2 sq ft)
Gross weight: 3,315 kg (7,308 lb)
Powerplant:
1× Shvetsov ASh-82FN air-cooled 14 cylinder radial engine with a two-stage supercharger and
fuel injection, 1.380 kW (1.850 hp), driving a 4-bladed VISh-110V propeller
Performance:
Maximum speed: 680 km/h (422 mph; 367 kn) at 6.000 meters (19.685 ft)
Range: 665 km (413 mi; 359 nmi)
Service ceiling: 11.500 m (37.667 ft)
Rate of climb: 17.25 m/s (3.410 ft/min)
Time to altitude: 4.8 minutes to 5.000 meters (16.404 ft)
Armament:
2 × 23 mm Nudelman-Suranov NS-23 cannons, 150 RPG, plus 200 kg (440 lb) of bombs
The kit and its assembly:
This whif was a bit of a spontaneous use of a Hobby Boss La-7 kit, part of a kit lot, for which I lacked any good idea. Anyway, I always had an eye on kits for the more streamlined La-9/11s – and then the idea was born to convert the leftover La-7 into something that would come close to the later types.
Biggest surgery concerned the aerodynamic surface; everything was modified:
• Outer wings from a Matchbox P-51D
• Stabilizers from a Heller P-51D
• Fin tip from an Academy Fw 190A
Wings were cut just outboard of the landing gear wells, while the Mustang wings were cut at the 2nd machine gun. Depth fits surprisingly well, only the La-7’s trailing edge had to be adapted, but that only a small effort.
Another mod is the new, for-bladed propeller, scratched from the spares box, and I added some cockpit details and a pilot torso (the canopy was to remain closed). I also removed the original tunnel oil cooler and moved this device into the wings’ leading edges, for a cleaner fuselage.
For the same clean look I left away any ordnance. Actually, when all major parts were in place, I even considered to make a race aircraft (Reno Unlimited?) from the kit, since the Lavochkin looks really fast, but then I reverted to the military use option. A North Korean whif was still missing!
Painting and markings:
When I started building there was no clear idea which country should use the La-7bis – I did not want Soviet markings, though. After some search in the decal stack I found spare North Korean markings, and from there things unfolded naturally.
The odd paint scheme was derived from real Korean La-11 fighters – a kind of tiger stripe pattern, dull green over a grey background with pale blue undersides. I used Humbrol 64 (light Sea Grey) and FS 34096 from Modelmaster, and FS 35414 from Modelmaster, too, for the undersides. Later, these colors were shaded with lighter tones. A yellow fin tip is the only color marking.
North Korean roundels come from a Print Scale MiG-15 decal sheet, the tactical code comes from the scrap box; the fine silver trim around the cowling and the black stripe under the yellow fin tip are decals, too, from generic TL Modellbau sheets.
All interior surfaces were painted with Humbrol 240 (RLM 02, plus a black ink wash), and to add some Soviet style the wheel discs were painted in dark green. The panels on the fuselage flanks were painted in a Metallizer Mix of Steel and Titanium.
The kit received a light black ink wash, plus some soot stains around the cannons and the exhaust shields. Finally, all was sealed with Revell’s acrylic matt varnish.
In the end, the La-7bis looks like less work than it actually was - one can argue if the effort has been worth it? The major transplantations are hard to discern and you have to look at least twice to recognize the differences between a La-7 and the later La-9 and -11. But that was intended – subtle and unspectacular.
Alessandra went on a little cruise with us today to the chalk cliff coast on the island Rügen.
Fashion credits: Outfit made by Frau E
A big success by any standard both in and out of competition, the Lancia Stratos was developed as a homologation Special for European rallying. After production ceased it became a cult car and is now highly priced as the ‘modern classis' it is. Conceived strictly for rallying, the Lancia Stratos however makes an exciting road car, though it is very far from GT standards in both luxury and refinement.
The concept vehicle responsible for providing the inspiration for the Lancia Stratos Rally car is the Lancia (Bertone) Stratos. The Stratos featured a 1584 cc V4 DOHC with 115 bhp horsepower at 200 rpm. Designed by Marcello Gandini, the same designer responsible for the Lamborghini Countach and Lamborghini Miura, the Stratos concept was a development of the Bertone designed Alfa Romeo Carabo concept from 1968. The Carabo concept was also a Gandini creation.
First revealed at the Turin Motor Show in October of 1970, the Lancia Stratos HF prototype was a styling exercise for Bertone. A futuristic design, the Stratos featured a wedge shaped profile that stood just 33 inches from the ground. Since the vehicle was so low, conventional doors could not be used and instead one accessed the interior of the Stratos by a hinged windscreen. Drivers had to flip up the windscreen and walk into the vehicle. Once inside, visibility was quite restricted since the front windscreen was narrow. The cockpit of the Lancia Stratos was designed specifically for fast forest flying.
The body design was predictably minimal to hold down weight and bulk with its most distinctive features being semi-concealed A-pillars and a door beltline that sharply upswept to the top of the daylight opening. The shape of the resulting unbroken expanse of glass gave the tunnelback roof the appearance of a futuristic crash helmet.
The main body structure was steel, like the chassis, and weight-saving fiberglass was used for tilt-up nose and tail sections. A small box above and behind the powertrain was where cargo space was held. Bins were also molded into the interior door panels for storing helmets.
The same engine utilized on the Lancia 1600 HF Fulvia was used on the Bertone designed Lancia Stratos Zero prototype. A triangular shaped panel hinged upwards to allow access to the mid-mounted engine. Developed for rallying purposes, the legendary Lancia Stratos was unveiled in 1974. The production vehicle Stratos was powered by a 2.4 liter mid-mounted V6 from the Ferrari Dino.
Like no other Lancia before or after, the Lancia Stratos was a shock that left enthusiasts and rally fans breathless. For almost a decade the Stratos streaked across the rally landscape much like a brilliant comet, while discarding past principles, it also fearlessly represented something undeniably new. A phenomenal rally car, the Lancia Stratos set an example to every other car manufacturer in the world. The first viable purpose-built rally car ever built, the Stratos was probably the last purpose-built rally car.
Created by the Bertone coachbuilding company, the Stratos was both radical, yet fully functional. Fiorio realized that for Lancia to continue to compete in the World Rally Championship, the Fulvia HF would need a much more powerful replacement. A the time, four-wheel drive was not an option, so a mid-engined configuration seemed ideal. To reinforce Fiori's convictions, the Bertone show car was featured soon after with a mid-engine Fulvia V4.
The introduction of the Ford mid-engine purpose-built GT70 rally car at the 1971Brussels Motor Show was what truly inspired the impetus behind the Stratos proect. It was after this appearance that Lancia's general manager, Pierugo Gobbato contacted Nuccio Bertone. Though the GT70 was actually never put in production by Ford, it was this that sparked the inspiration of the Lancia Stratos.
As always, there was a minimum production requirement, 500 units for the Lancia Stratos. This was an awkward figure that would necessitate funds for at least semi-permanent tooling as well as design and development. This was a job well suited to the Italian industry. Fiorio masterminded the project, and he envisioned a short, wide coupe with transverse midships drivetrain. Bertone was immediately contracted to style the vehicle and built its unit body/chassis structure.
43 months passed in between the time of conception to the actual birth of the Lancia Stratos. The vehicle was developed to take over and make Lancia the outright world rally champ. The Stratos was both short and wide, with a wheelbase of only 7 feet 1.8 inches, the width of the vehicle was only 5 feet 8.9 inches. Weighing only 1958 lbs, the Stratos was only 3 feet 7.9 inches high. Able to easily exceed 140 mph, the Stratos featured 190 horsepower in roadgoing trim.
Having studied every possible powerteam in the Fiat/Lancia group, Fiorio secured 2.4 liter V-6s and 5-speed transaxles from Ferrari, which was an ideal chouse as they'd be installed exactly as the Dino 246. All-independent suspension, rack-and-pinion steering and four-wheel disc brakes were all specifically designed for the Lancia Stratos.
After 1978 the Stratos was officially retired and no longer was officially entered by the Lancia factory, the vehicle was still going strong. The Lancia team was headed by by Sandro Munari who won its first event as a homologated entry in October of 1974. Mun ari entered alone 40 events with the Lancia Stratos and won 14. The Stratos also won the World Rally Championship in 1974, 1975, and 1976 and remained competitive for another four years. The final major win came in 1979 when a Lancia Stratos entered by the Monaco importer won the famed Monte Carlo Rally. Finally the factory retired the Stratos.
By Jessica Donaldson
[Text from ConceptCarz.com]
www.conceptcarz.com/z21737/Lancia-Stratos-HF.aspx
This Lego miniland-scale Lancia Stratos Rally Racer has been created for Flickr LUGNuts' 100th Build Challenge - our Centenary, titled 'One Hundred Ways to Win!'. In this challenge, a list of 100 challenges is available, kept by the admins. Individuals wishing to enter, request a number from 1-100 (so long as it has not already been requested) - and the admins assign the individual build challenge associated with that number.
In the case of admins entering models - they request that a general LUGNuts member assigns a number - and the admin must build to that challenge number.
In this case, the number 78 was chosen for me, corresponding to the challenge: '78.Any vehicle from the year you were born'. I was born in 1972, the year that the first Stratos rally cars were built, entering in the Rally Championship as Group 5 (un-homologated) entries.
The road cars required to homologate for Group 4 were built through 1973 to 1978.
n° 57 of 100
Chassis n° ZA9H12EAYYSF76077
Bonhams
Les Grandes Marques du Monde à Paris
The Grand Palais Éphémère
Place Joffre
Parijs - Paris
Frankrijk - France
February 2023
Estimated : € 2.300.000 - 2.700.000
Unsold
"It's a car with its own personality – or rather its own split personality. Beyond refinement and ease of use is a demon with one eye open waiting for its turn, a car that is scintillatingly fast and hugely demanding, a car that can thrill and terrify in equal measure, a supercar in every sense of the word." – evo.
One of the more fascinating aspects of the modern motoring scene is the recent emergence of the small independent supercar manufacturer, many of which have gone from relative obscurity to the status of household names in just a few short years, usually on the back of a product range offering hitherto almost unimaginable levels of performance. Whereas at one time established manufacturers such as Ferrari, Lamborghini, Porsche, Mercedes-Benz, and Aston Martin only had one another to worry about, they now have to contend with the likes of Koenigsegg, De Tomaso and, of course, Pagani.
Succeeding the Zonda, Pagani's latest offering is the Huayra, a mid-engined coupé hailed by Top Gear magazine as 'Hypercar of the Year 2012'. Horacio Pagani was no newcomer to the world of automotive engineering when he built the first Zonda in 1999, for the Argentine-born industrial design graduate had been working with Lamborghini since the mid-1980s, developing the Countach and Diablo road cars and assisting with the Italian manufacturer's Formula 1 engine programme. The Zonda C12 debuted in coupé form at the 1999 Geneva Motor Show, its maker freely acknowledging that its styling had been inspired by the Mercedes-Benz Group C 'Silver Arrow' sports-racers. Mercedes-Benz's influence was more than just skin deep, for the German firm's AMG performance division was responsible for the Zonda's 6.0-litre V12 engine, which was mounted longitudinally amidships in the predominantly carbon fibre body tub. With some 408 horsepower on tap, the C12 was always going to be quick, but performance figures of 0-60mph in 4.2 seconds and 0-100 in 8.2 were simply staggering plus, of course, that all important 200mph (or thereabouts) top speed.
Seemingly small from the outside yet endowed with a comfortable cabin, the C12 provided the basis for a host of derivatives, which emerged from Pagani's factory at San Cesario sul Panaro near Modena (where else?) in strictly limited numbers over the next 11 years.
Its successor, the Huayra - named after a wind god of the South American Quechua people - made its public debut at the Geneva Motor Show in March 2011. Once again, AMG provided the engine, on this occasion a twin-turbocharged 6.0-litre V12 producing a mighty 620bhp and a titanic 737lb/ft of torque. A mind-boggling top speed of around 238mph (383km/h) was claimed for the Huayra, with the 0-60mph dash accomplished in a neck-snapping 2.8 seconds. Power reaches the road via a transversely-mounted Xtrac seven-speed sequential semi-automatic transmission, while the stupendous performance is kept in check by Brembo carbon ceramic disc brakes featuring four-pot callipers all round. It is worthwhile noting the Horacio Pagani chose to stick with a conventional single clutch rather than the more complex and heavier twin-clutch technology favoured by some rivals, reasoning that the considerable saving in weight would result in a better balanced car.
The most significant difference between the Huayra and its Zonda predecessor is the former's use of active aerodynamic aids. These consist of variable front ride height and moveable spoilers at front and rear, their deployment being managed by a dedicated control unit to minimise drag or maximise downforce as required. Under hard braking, the rear spoiler flaps function as an air brake, the front ride height being increased at the same time to counteract weight transfer to the front wheels and thus maintain stability. Cleverly, this system is also used to limit body roll when cornering by raising the 'inside' flaps to generate increased down force on that side only. As had been the case with the Zonda, an open roadster and various limited edition variants followed.
Testing a Huayra in 2013, evo magazine found that even before the ignition key had been turned, the experience of just sitting in the cockpit was almost overwhelming. 'Inside a leather, carbonfibre and aluminium cocoon of obsession, every detail agonised over and beautifully thought out, every material used sympathetically and expertly integrated into this stunning sculpture. The driving position is superb.' Needless to say, the driving experience did not disappoint: 'the engine is just phenomenally powerful and when it's delivering the full 737lb/ft of torque, it scrambles your brain. This is the sort of performance that doesn't dull even with prolonged exposure'.
Pagani's agreement with AMG limited the supply of engines to 100 units, restricting production to only 100 cars, thus guaranteeing the Huayra's instant exclusivity and future collectible status.
Number '57' of the 100 Huayra Roadsters built, this car was delivered new to Denmark and registered in July 2020. The car had been ordered and specified by a Danish car collector, who took delivery but never drove it. He then sold the car to another Danish collector, in whose hands it has covered fewer than 800 kilometres.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The Lavochkin La-7 (Russian: Лавочкин Ла-7) was a piston-engine Soviet fighter developed during World War II by the Lavochkin Design Bureau (OKB). It was a development and refinement of the Lavochkin La-5, and the last in a family of aircraft that had begun with the LaGG-1 in 1938.
By 1943, the La-5 had become a mainstay of the Soviet Air Forces, yet both its head designer, Semyon Lavochkin, as well as the engineers at the Central Aerohydrodynamics Institute (Russian: TsAGI), felt that it could be improved upon. TsAGI refined earlier studies of aerodynamic improvements to the La-5 airframe in mid-1943 and modified La-5FN to evaluate the changes between December 1943 and February 1944 and proved to have exceptional performance.
Using the same engine as the standard La-5FN the modified aircraft had a top speed of 684 kilometers per hour (425 mph) at a height of 6,150 meters (20,180 ft), some 64 kilometers per hour (40 mph) faster than the production La-5FN. It took 5.2 minutes to climb to 5,000 meters (16,404 ft). Main change was the use of more lighter but stronger metal wing spars to save weight.
The La-5, as well as its predecessors, had been built mostly of wood to conserve strategic materials such as aircraft alloys. With Soviet strategists now confident that supplies of these alloys were unlikely to become a problem, Lavochkin was now able to replace some wooden parts with alloy components.
Combat trials began in mid-September 1944 and were generally very positive.
However four aircraft were lost to engine failures and the engines suffered from numerous lesser problems, despite its satisfactory service in the La-5FN. One cause was the lower position of the engine air intakes in the wing roots of the La-7 which caused the engine to ingest sand and dust. One batch of flawed wings was built and caused six accidents, four of them fatal, in October which caused the fighter to be grounded until the cause was determined to be a defect in the wing spar.
Production of the first aircraft fitted with three B-20 cannon began in January 1945 when 74 were delivered. More than 2000 La-7 aircraft were delivered before the war's end, and a total of 5753 aircraft until production ceded in 1946.
Still, the basic concept had more development potential, and as soon as March 1945 work on further improvements for the La-7 started, while in parallel a new type was under development - the La-9, which would enter prototype stage in 1946. An interim type was needed - and this became the La-7bis. It was based on the proven La-7, but already incorporated crucial elements of the future La-9, e. g. its laminar flow wing shape as well as an increased share of light alloy in the construction.
Overall, the La-7bis was tailored to higher operation altitudes than the standard La-7 and was intended to intercept high flying bombers and reconnaissance aircraft like the Ju 388. Therefore the interim type incorporated many small refinements and changes, most notably a bigger wing and fin area, a four-bladed propeller and a pair of new 23 mm Nudelman-Suranov NS-23 cannons which considerably improved firepower and weapon range.
The La-7bis was built in parallel to the standard La-7, but only at Zavod Nr. 99 in Ulan-Ude, where 433 aircraft were built until 1946. Only a few La-7bis reached the front units during WWII in time, and in Soviet service the type was quickly superseded by the La-9. Many aircraft were used in flying schools and training regiments, though, or quickly handed over to allies like China and Korea.
With these operators the La-7bis actively took part in the Korean War and remained in service until the mid-Sixties, when piston fighters were finally replaced by the highly successful MiG-15.
Even though a sub version of the La-7, the type received the separate Air Standardization Coordinating Committee (ASCC) code "Flake" as it was initially mistaken as a new Lavochkin type.
General characteristics
Crew: 1
Length: 8.89 m (29 ft 1 1/2 in)
Wingspan: 10,16 m (33 ft 3 in)
Height: 2.41 m (7 ft 11 in)
Wing area: 19.59 m2 (210.2 sq ft)
Gross weight: 3,315 kg (7,308 lb)
Powerplant:
1× Shvetsov ASh-82FN air-cooled 14 cylinder radial engine with a two-stage supercharger and
fuel injection, 1.380 kW (1.850 hp), driving a 4-bladed VISh-110V propeller
Performance:
Maximum speed: 680 km/h (422 mph; 367 kn) at 6.000 meters (19.685 ft)
Range: 665 km (413 mi; 359 nmi)
Service ceiling: 11.500 m (37.667 ft)
Rate of climb: 17.25 m/s (3.410 ft/min)
Time to altitude: 4.8 minutes to 5.000 meters (16.404 ft)
Armament:
2 × 23 mm Nudelman-Suranov NS-23 cannons, 150 RPG, plus 200 kg (440 lb) of bombs
The kit and its assembly:
This whif was a bit of a spontaneous use of a Hobby Boss La-7 kit, part of a kit lot, for which I lacked any good idea. Anyway, I always had an eye on kits for the more streamlined La-9/11s – and then the idea was born to convert the leftover La-7 into something that would come close to the later types.
Biggest surgery concerned the aerodynamic surface; everything was modified:
• Outer wings from a Matchbox P-51D
• Stabilizers from a Heller P-51D
• Fin tip from an Academy Fw 190A
Wings were cut just outboard of the landing gear wells, while the Mustang wings were cut at the 2nd machine gun. Depth fits surprisingly well, only the La-7’s trailing edge had to be adapted, but that only a small effort.
Another mod is the new, for-bladed propeller, scratched from the spares box, and I added some cockpit details and a pilot torso (the canopy was to remain closed). I also removed the original tunnel oil cooler and moved this device into the wings’ leading edges, for a cleaner fuselage.
For the same clean look I left away any ordnance. Actually, when all major parts were in place, I even considered to make a race aircraft (Reno Unlimited?) from the kit, since the Lavochkin looks really fast, but then I reverted to the military use option. A North Korean whif was still missing!
Painting and markings:
When I started building there was no clear idea which country should use the La-7bis – I did not want Soviet markings, though. After some search in the decal stack I found spare North Korean markings, and from there things unfolded naturally.
The odd paint scheme was derived from real Korean La-11 fighters – a kind of tiger stripe pattern, dull green over a grey background with pale blue undersides. I used Humbrol 64 (light Sea Grey) and FS 34096 from Modelmaster, and FS 35414 from Modelmaster, too, for the undersides. Later, these colors were shaded with lighter tones. A yellow fin tip is the only color marking.
North Korean roundels come from a Print Scale MiG-15 decal sheet, the tactical code comes from the scrap box; the fine silver trim around the cowling and the black stripe under the yellow fin tip are decals, too, from generic TL Modellbau sheets.
All interior surfaces were painted with Humbrol 240 (RLM 02, plus a black ink wash), and to add some Soviet style the wheel discs were painted in dark green. The panels on the fuselage flanks were painted in a Metallizer Mix of Steel and Titanium.
The kit received a light black ink wash, plus some soot stains around the cannons and the exhaust shields. Finally, all was sealed with Revell’s acrylic matt varnish.
In the end, the La-7bis looks like less work than it actually was - one can argue if the effort has been worth it? The major transplantations are hard to discern and you have to look at least twice to recognize the differences between a La-7 and the later La-9 and -11. But that was intended – subtle and unspectacular.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The Gloster Glaive was basically a modernized and re-engined variant of the successful, British-built Gloster Gladiator (or Gloster SS.37), the RAF’s final biplane fighter to enter service. The Gladiator was not only widely used by the RAF at the dawn of WWII and in almost every theatre of operations, but also by many other nations. Operators included Norway, Belgium, Sweden, Greece, Latvia, Lithuania or Nationalist China, and while the RAF already opted for more modern monoplanes, Gloster saw the opportunity to sell an updated Gladiator to countries which were not as progressive.
Originally designated Gladiator Mk. IV, the machine received many aerodynamic refinements and the motor was changed from a draggy radial to a liquid-cooled inline engine. The latter was the new Rolls Royce Peregrine, a development of the Kestrel. It was, in its original form, a 21-litre (1,300 cu in) liquid-cooled V-12 aero engine ), delivering 885-horsepower (660 kW). The engine was housed under a streamlined cowling, driving a three blade metal propeller, and was coupled with a ventral radiator bath, reminiscent of the Hawker Fury biplane’s arrangement.
Structural improvements included an all-metal monocoque fuselage and stabilizers, as well as new wings and streamlined struts with reduced bracing. The upper wing was enlarged and of all-metal construction, too, while the lower wings were reduced in span and area, almost resulting in a sesquiplane layout. The total wing area was only marginally reduced, though.
The fixed landing gear was retained, but the main wheels were now covered with spats. The pilot still sat in a fully enclosed cockpit, the armament consisted of four machine guns, similar to the Gladiator. But for the Glaive, all Browning machine guns were synchronized and mounted in the fuselage: one pair was placed on top of the cowling, in front of the cockpit. Another pair, much like the Gladiator’s arrangement was placed in the fuselage flanks, below the exhaust outlets.
Compared with the Gladiator, the design changes were so fundamental that Gloster eventually decided to allocate a separate designation – also with a view to the type’s foreign marketing, since a new aircraft appeared more attractive than another mark of a pre-war design. For the type’s virgin flight in late 1938 the name “Glaive” was unveiled to the public, and several smaller European air forces immediately showed interest, including Greece, Croatia, Turkey, Portugal and Egypt.
Greece was one of the initial customers, and the first of a total of 24 aircraft for the Hellenic Air Force was delivered in early 1939, with 24 more on order (which were never delivered, though). The initial batch arrived just in time, since tension had been building between Greece and Italy since 7 April 1939, when Italian troops occupied Albania. On 28 October 1940, Italy issued an ultimatum to Greece, which was promptly rejected. A few hours later, Italian troops launched an invasion of Greece, initiating the Greco-Italian War.
The Hellenic Gloster Glaives were split among three Mirae Dioxeos (Fighter Squadrons): the 21st at Trikala, 22nd at Thessaloniki and 23rd at Larissa. When Italy attacked in October 1940, the British fighter was, together with the PZL 24, the Greeks' only modern type in adequate numbers. However, by late 1940, the Gloster Glaive was already no longer a front-runner despite a powerful powerplant and satisfactory armament. It had no speed advantage over the Fiat Cr.42 nor could it outfly the nimble Italian biplane, and it was much slower than the Macchi MC.200 and the Fiat G.50 it was pitted against. Its agility was the only real advantage against the Italian fighters, whose reliance on the slow firing Breda-SAFAT 12.7mm machine guns proved detrimental.
Anyway, on 5 April 1941, German forces invaded Greece and quickly established air superiority. As the Allied troops retreated, British and Hellenic forces covered them, before flying to Crete during the last week of April. There, the refugee aircraft recorded a few claims over twin-engine aircraft before being evacuated to Egypt during the Battle of Crete.
Overall, the Glaives performed gallantly during the early period of the conflict, holding their own against impossible numerical odds and despite the fact that their main target were enemy bombers which forced them to fight at a disadvantage against enemy fighters. Italian claims of easy superiority over the Albanian front were vastly over-rated and their kill claims even exceeded the total number of operational fighters on the Greek side. Total Greek fighter losses in combat came to 24 a/c with the Greek fighter pilots claiming 64 confirmed kills and 24 probables (about two third bombers).
By April 1941, however, lack of spares and attrition had forced the Hellenic Air Force to merge the surviving seven Glaives with five leftover PZL.24s into one understrength squadron supported by five Gloster Gladiators Mk I & II and the two surviving MB.151s. These fought hopelessly against the Luftwaffe onslaught, and most aircraft were eventually lost on the ground. None of the Hellenic Gloster Glaives survived the conflict.
General characteristics:
Crew: two
Length: 8.92m (29 ft 3 in)
Wingspan: 34 ft 0 in (10.36 m)
Height: 11 ft 9 in (3.58 m)
Wing area: 317 ft² (29.4 m²)
Empty weight: 1,295 kg (2,855 lb)
Max takeoff weight: 1,700 kg (3,748 lb)
Powerplant:
1× Rolls Royce Peregrine II liquid-cooled V12 inline engine, rated at 940 hp (700 kw)
Performance:
Maximum speed: 405 km/h (252 mph; 219 kn) at 4,400 m (14,436 ft)
Cruise speed: 345 km/h (214 mph; 186 kn)
Stall speed: 60 mph (52 knots, 96 km/h)
Range: 373 mi (600 km; 324 nmi)
Endurance: 2 hours
Service ceiling: 10,600 m (34,800 ft)
Rate of climb: 2,982 ft/min (15.15 m/s)
Time to altitude: 10.000 ft (3.050 m) in 3 minutes 20 seconds
Armament:
4× 0.303 calibre (7.7 mm) M1919 Browning machine guns in the fuselage
Provisions for 6× 10 kg (22 lb) or 4x 20 kg (44 lb) bombs under the lower wings
The kit and its assembly:
The fictional Gloster Glaive started quite simple with the idea of replacing the Gladiator’s radial with an inline engine. But this soon did not appear enough for an update – the Peregrine hardly delivered much more power than the former Mercury, so I considered some structural updates, too. Most of them comprised the replacement of former fabric-covered structures, and this led conceptually to a kitbash with only some Gladiator fuselage and tail parts left.
The basis is (once more) the very nice Matchbox Gloster Gladiator, but it was heavily modified. As an initial step, fuselage, fin and stabilizers (all OOB parts) lost their rib-and-fabric structure, simply sanded away. A minor detail, but it changes the overall look of the aircraft a lot, making it appear much more modern.
The fuselage was left without the OOB radial, and instead a leftover Merlin front end from an Airfix Hurricane (ca. 1cm long, left over from one of my first whif builds ever, a Hurricane with a radial engine!) was added. The lines match pretty well: the side profile looks sleek, if not elegant, but the Gladiator fuselage turned out to be wider than expected. Some major body work/PSR was necessary to integrate the new nose, but the result looks very good.
The liquid-cooled engine necessitated a radiator somewhere on the airframe…! Since I wanted the nose to remain slim and streamlined I eventually placed the radiator bath under the fuselage, much like the arrangement of the Hawker Fury biplane. The radiator itself comes from a late Spitfire (FROG kit).
The exhaust was taken from the Hurricane kit, too, and matching slits dug into the putty nose to take them. The three blade propeller is a mash-up, too: the spinner belongs, IIRC, to an early Spitfire (left over from an AZ Models kit) while the blades came from a damaged Matchbox Brewster Buffalo.
The Gladiator’s fuselage flank machine guns were kept and their “bullet channels” extrapolated along the new cowling, running under the new exhaust pipes. Another pair of machine guns were placed on top of the engine – for these, openings were carved into the upper hull and small fairings (similar to the Browning guns in the flanks) added. This arrangement appeared plausible to me, since the Gladiator’s oil cooler was not necessary anymore and the new lower wings (see below) were not big enough anymore to take the Gladiator’s underwing guns. Four MGs in the fuselage appears massive – but there were other types with such an arrangement, e.g. the Avia B-534 with four guns in the flanks and an inline engine.
The wings are complete replacements: the upper wing comes from a Heller Curtiss SBC4, while the lower wings as well as the spats (on shortened OOB Gladiator struts) come from an ICM Polikarpov I-153. All struts were scratched. Once the lower wings were in place and the relative position of the upper wing clear, the outer struts were carved from 1mm styrene sheet, using the I-153 design as benchmark. These were glued to the lower wing first, and, once totally dry after 24h, the upper wing was simply glued onto the top and the wing position adjusted. This was left to dry another 24h, and as a final step the four struts above the cowling (using the OOB struts, but as single parts and trimmed for proper fit) were placed. This way, a stable connection is guaranteed – and the result is surprisingly sturdy.
Rigging was done with heated sprue material – my personal favorite for this delicate task, and executed before painting the kit started so that the glue could cure and bond well.
Painting and markings:
The reason why this aircraft ended in Greek service is a color photograph of a crashed Hellenic Bloch M.B. 152 (coded ‘D 177’, to be specific). I guess that the picture was post-colored, though, because the aircraft of French origin sports rather weird colors: the picture shows a two-tone scheme in a deep, rather reddish chestnut brown and a light green that almost looks like teal. Unique, to say the least... Underside colors couldn’t be identified with certainty in the picture, but appeared like a pale but not too light blue grey.
Anyway, I assume that these colors are pure fiction and exaggerated Photoshop work, since the few M.B. 152s delivered to Greece carried AFAIK standard French camouflage (in French Khaki, Chestnut Brown and Blue-Grey on the upper surfaces, and a very light blue-grey from below). I’d assume that the contrast between the grey and green tones was not very obvious in the original photograph, so that the artist, not familiar with WWII paint schemes, replaced both colors with the strange teal tone and massively overmodulated the brown.
As weird as it looked, I liked this design and used it as an inspirational benchmark for my Hellenic Glaive build. After all, it’s a fictional aircraft… Upper basic colors are Humbrol 31 (RAF Slate Grey) and 160 (German Camouflage Red Brown), while the undersides became French Dark Blue Grey (ModelMaster Authentics 2105). The result looks rather odd…
Representing a combat-worn aircraft, I applied a thorough black ink wash and did heavier panel shading and dry-brushing on the leading edges, along with some visible touches of aluminum.
The Hellenic roundels come from a TL Modellbau aftermarket sheet. The tactical code was puzzled together from single letters, and the Greek “D” was created from single decal strips. For better contrast I used white decals – most Hellenic aircraft of the time had black codes, but the contrast is much better, and I found evidence that some machines actually carried white codes. The small fin flash is another free interpretation. Not every Hellenic aircraft carried these markings, and instead of painting the whole rudder in Greek colors I just applied a small fin flash. This was created with white and blue decal strips, closely matching the roundels’ colors.
Finally, after some soot stains around the guns and the exhausts, the kit was sealed with matt acrylic varnish.
Modified beyond recognition, perhaps…? The fictional Gloster Glaive looks IMHO good and very modern, just like one of those final biplane designs that were about to be outrun by monoplanes at the brink of WWII.
Same fold more refinement and folded from elephant Hide paper. Single uncut Square.
Based on a donkey design from 1981.
Yesterday was the last day with the model..but a few of us have booked a few more hours with her next week to do some refinements of the hands and feet.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
It took China long way to develop and produce a true supersonic fighter aircraft: in March, 1964, Shenyang Aircraft Factory began the first domestic production of the J-7 jet fighter. However, the mass production of the aircraft, which had been developed through Soviet help, license production and reverse-engineering, was severely hindered by an unexpected problem—the Cultural Revolution. This incident and its consequences resulted in poor initial quality and slow progress.
This, in turn, resulted in full scale production only coming about in the 1980s, by which time the J-7 design was showing its age. However, through the years the J-7 saw constant development and refinement in China.
One of the many directions of the prolific J-7 family was the J-7III series, later re-coded J-7C. This variant was in so far special, as it was not based on the 1st generation MiG-21F. It was rather a reverse-engineered MiG-21MF obtained from Egypt, but just like the Soviet ejection seat, the original Soviet radar failed to impress Chinese, so a domestic Chinese radar was developed for the aircraft called the "JL-7". JL-7 is a 2 cm wavelength mono pulse fire radar weighing 100 kg, with a maximum range of 28 km, and MTBF is 70 hours.
However, due to the limitation of Chinese avionics industry in the 1980s, the performance of the domestic Chinese fire control radars were not satisfactory, because due to their relatively large size, the nosecone had to be enlarged, resulting in decrease in aerodynamic performance of the series. As a result, only very limited numbers of this series were built.
The J-7III prototypes comprised a series of a total of 5 aircraft, equipped with domestically developed HTY-3 ejection seat and KL-11 auto pilot. These machines had to be powered by the domestic WP-7 engine (a copy of the MiG-21F's Tumansky R-11) because the intended WP-13F (a license build of the Tumansky R-13) failed to meet the original schedule. The J-7III was planned to enter service in 1985, but due to the delay of WP-13 development, it was not until 1987 when the design was finally certified.
Production of the true J-7C fighter started in 1989, when the WP-13 became available, but only a total of 17 were built until 1996. It was soon superseded by the J-7IIIA, the prototype of the more sophisticated J-7D. This upgraded all-weather fighter was equipped with KJ-11A auto pilot, JD-3II TACAN, ADS-1 air data computer, Type 563B INS, WL-7A radio compass, Type 256 radar altimeter, TKR-122 radio, 930-4 RWR, 941-4A decoy launcher, and an improved JL-7A radar.
The fighter was to be armed with PL-7 & PL-8 AAMs and carried a twin 23 mm gun (a copy of the MiG-21MF's ventral GSh-23-2 cannon). A HK-13A HUD replaced HK-03D optical sight in earlier models. The upgraded JL-7A fire control radar had look-down/shoot-down capability added.
The production J-7D received an uprated WP-13FI engine, and initial certification was received in November 1994, but it was not until more than a year later in December 1995 when the model was finally fully certified due to the need to certify the WP-13FI on the aircraft. But, again, the results were not satisfactory and only 32 were built until 1999.
Even though the J-7C and D had been developed from a much more modern basis than the earlier MiG-21F derivatives, the "new" type offered - except for the more capable radar and the all-weather capability - no considerable benefit, was even less manoueverable in dogfight situations, more complex and expensive, and also had a very limited range. What was needed was a revolutionary step forward.
Such a proposal came from Chengdu Aircraft Corporation's general designer Mr. Wang Zi-fang (王子方) in 1998, who had already worked on the J-7D. He proposed the addition of fuselage elements that would partly replace the inner wing sections and create lift, but also offer additional room for more and better avionics, allowing the carriage of state-of-the-art weaponry like the PL-11 AAM, together with more internal fuel. Furthermore, the adaptation of the WS-13 turbofan, a new engine for which project work had just started and which would improve both range and performance of the modified aircraft.
In 2000, while an alternative design, the J-7FS, had been under parallel development and cleared for service by then, CAC received green lights for a developmental technology demonstrator under the label J-7DS (S stands for Shi-yan, 试验, meaning "experimental" in Chinese).
While the general third generation MiG-21 outlines were retained, the blended wing/body sections - certainly inspired by US American types like the F-16 and the F-18 - and a new, taller fin changed overall proportions considerably. Esp. from above, the bigger wing planform with extended LERXes (reminiscent of the MiG Analog experimental delta wing aircraft that were used during the Tu-144 development in the Soviet union) created the impression of a much more massive and compact aircraft, even though the dimenions remained unchanged.
Thanks to the additional space in the BWB sections, new and better equipment could be installed, and the aerodynamics were changed, too. For instance, the J-7's air brakes under the forward fuselage were deleted and replaced by a new pair of splayed design, stabilizing the aircraft more effectively in a dive. The single air brake in front of the ventral fin was retained, though, as well as the blown flaps from the MiG-21MF.
The ventral gun pod with a domestic copy of the GSh-23-2 was also deleted; this space, together with the air brake compartment, was now used for a semi-recessed laser range finder, so that guided ammunition could be deployed. But a gun was retained: a new, more effective Type 30-I 30 mm (1.18 in) cannon (a copy of the Gryazev-Shipunov GSh-30-1) with 150 rounds was placed into the port LERX, under the cockpit.
Inside of the LERX on the other side, compartments for new avionics (esp. for the once more upgraded JL-7B fire control radar) were added. With this radar and weapons like the PL-11 missile, the aircraft finally achieved the long desired BVR interception capability.
Flanking the new, longer WS-13 engine, the BWBs held extra fuel tanks. For en even more extended range and loiter time, provisions were made for a fixed air-refuelling probe on the starboard side under the cockpit.
Under the inner wings, an additional pair of pylons was added (for a total of seven), and overall ordnance load could be raised to 3.000 kg (6.600 lb).
The first J-7DS first flew in summer 2005, still only powered by an WP-13I engine, for a 22-month test program. Three prototypes were built, but only the first two aircraft were to fly – the third machine was only used for static tests.
The driving force behind this program was actually the PLANAF, the People's Liberation Army, Naval Air Force (中國人民解放軍海軍航空兵). While the Chinese Air Force rather placed its bet on the more modern and sophisticated Chengdu J-10 fighter, the PLANAF was rather looking for a more simple and inexpensive multi-role combat aircraft that could carry out both air defence and strike missions, and replace the ageing (and rather ineffective) J-8 fighters and Q-5 attack aircraft, as well as early J-7II fighters with limited all-weather capability. Consequently, the type was only operated by the PLANAF from 2010 onwards and received the official designation J-7DH ("H" for 海军 [Haijun] = Navy).
Production was still continuing in small numbers in late 2016, but the number of built specimen is uncertain. About 150 J-7DH are supposed to be in active service, mostly with PLANAF Northern and East Fleet units. Unlike many former J-7 variants (including its ancestor, the PLAAF's more or less stillborn C and D variants), the J-7DH was not offered for export.
General characteristics:
Crew: 1
Length: 14.61 m (47 ft 10½ in)
15.69 m (51 ft 5 in) with pitot
Wingspan: 7,41 m (24 ft 3½ in)
Height: 4.78 m (15 ft 8½ in)
Wing area: 28.88 m² (309.8 ft²)
Aspect ratio: 2.8:1
Empty weight: 5,892 kg (12.977 lb)
Loaded weight: 8,240 kg (18.150 lb)
Max. take-off weight: 9,800 kg (21.585 lb)
Powerplant:
1× Guizhou WS-13 turbofan with a dry thrust of 51.2 kN (11,510 lbf)
and 84.6 kN (19,000 lbf) with afterburner
Performance
Maximum speed: Mach 2.0, 2,200 km/h (1.189 knots, 1.375 mph)
Stall speed: 210 km/h (114 knots, 131 mph) IAS
Combat radius: 1.050 km (568 nmi, 652 mi) (air superiority, two AAMs and three drop tanks)
Ferry range: 2,500 km (1.350 nmi, 1.550 mi)
Service ceiling: 17,500 m (57.420 ft)
Rate of climb: 195 m/s (38.386 ft/min)
Armament:
1× Type 30-I 30mm (1.18") cannon with 150 rounds in the port forward fuselage;
7× hardpoints (6× under-wing, 1× centerline under-fuselage) with a capacity of 3,000 kg maximum (up to 500 kg each); Ordnance primarily comprises air-to-air missiles, including PL-2, PL-5, PL-7, PL-8, PL-9 and PL-11 AAMs, but in a secondary CAS role various rocket pods an unguided bombs of up to 500kg caliber can be carried
The kit and its assembly:
Another Chinese whif, and again a MiG-21 derivative - a fruitful source of inspiration. The J-7DH is not based ona real world project, though, but was rather inspired by an article about a Chinese 2020 update for the MiG-21 from Japan, including some drawings and artwork.
The latter depicted a late MiG-21 with some minor mods, but also some characteristic F-16 parts like the chines and the BWB flanks grafted to it - and it looked good!
Since I recently butchered an Intech F-16 for my Academy T-50 conversion (primariliy donation the whole landing gear, including the wells), I had a donor kit at ahnd, and I also found a Mastercraft MiG-21MF in my stash without a true plan. So I combined both for "something Chinese"...
The build was pretty starightforward - except for the fact that the Intech F-16 is a rather clumsy affair (donating the fin and the fuselage flanks) and that no part from the Mastercraft MiG-21 matches with another one! Lots of improvisation and mods were necessary.
On the other side, the F-16 parts were just glued onto the MiG-21 fuselage and blended into one with putty (in several layers, though).
The fin was taken wholesale from the F-16, but clipped by about 5mm at the top. I originally wanted to use F-16 wings with wing tip launch rails and the stabilizers, too, but when I held them to the model it looked wacky - so I reverted to the Fishbed parts. The stabilizers were taken OOB, but the wing span was reduced at the roots, so that the original MiG-21 wing span was retained. Only the landing gear wells had to be adapted accordingly, but that was easier than expected and the result looks very organic.
With more wing area, I added a third pair of hardpoints under the wing roots, and I kept the gun under the cockpit in the LERX. That offered room inside of the fuselage, filled by a laser rangefinder in a canoe fairing where the original gun used to be.
On the tail, a new jet nozzle was mounted, on the fuselage some air scoops and antennae were added an an IR sensor on the nose. A new seat was used in the cockpit instead of the poor L-shaped OOB thing. The PL-2 & -11 ordnance consists of simple AIM-9Bs and slightly modified AIM-120, plus some launch rails from the scrap box.
Paintings and markings:
Modern Chinese military aircraft are hardly benchmarks for creative paint schemes - and the only "realistic" option in this case would have been a uniform grey livery. The original J-7C PLAAF night fighters carried a high contrast sand/dark green/light blue livery, similar to the MiG-21 export scheme (a.k.a. "Pumpkin"), but I found the latter not suitabel for a naval operator.
I eventually found a compromise, using one of the J-7C schemes as pattern but using grey tones instead - still not very colorful, but the "clover" patterns would help disrupt the aircraft's outlines and support the modern look and feel of this whif.
Basic colors are Humbrol 140 (Dark Gull Grey, FS 36231) and 165 (RAF Medium Sea Grey) from above, plus 122 (IAF Pale Blue, FS 35622) on the undersides. With the dark grey pattern placed with no direct connection to the Pale Blue undersides, there's even a blending effect between the tones - not spectacular, but IMHO effective.
The cockpit interior became pale teal (a mix of Soviet Cockpit Blue and white), while the landing gear wells were painted with a mix of Humbrol 56, 119 and 225 - for a yellow-ish, dull metallic brown. The wheel discs became bright green (Humbrol 131), and any di-electric panel and the radome became deep green (Humbrol 2).
The decals come from a Begemot MiG-21 sheet (roundels), while the tactical 5-digit code comes from an Airfix 1:72 B-17 sheet. The yellow code is a bit unusual, as well as its place on the fin, but both occur on Chinese fighters.
The code itself is based on the information published in the 2010 book “Chinese Air Power” by Yefim Gordon und Dmitriy Komissarov, where the Chinese code system is explained – I hope that it is more or less authentic.
The kit received a light black ink wash and some dry painting with lighter blue-grey shades, but no weathering, since modern Chinese aircraft tend to look pretty clean and pristine. Since the kits both did not feature much surface details, and a lot of the few OOB details got lost during the PSR process for the BWB wing sections, I painted some details and panel lines with a soft pencil - a compromise, though. Finally, the kit was sealed with matt acrylic varnish.
The result is a pretty subtle whif, and with the F-16 parts added the result even looks very conclusive! From above, the extra fuselage width makes the Fishbed look very massive, which is underlined by the extended stabilizer span. But I think that retailing the original MiG-21 delta wing was a good decision, because it helps retaining the Fishbed's "fast" look.
I am just not 100% happy with the finish - but for the crappy kits I used as basis it's O.K.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!
It took China long way to develop and produce a true supersonic fighter aircraft: in March, 1964, Shenyang Aircraft Factory began the first domestic production of the J-7 jet fighter. However, the mass production of the aircraft, which had been developed through Soviet help, license production and reverse-engineering, was severely hindered by an unexpected problem—the Cultural Revolution. This incident and its consequences resulted in poor initial quality and slow progress.
This, in turn, resulted in full scale production only coming about in the 1980s, by which time the J-7 design was showing its age. However, through the years the J-7 saw constant development and refinement in China.
One of the many directions of the prolific J-7 family was the J-7III series, later re-coded J-7C. This variant was in so far special, as it was not based on the 1st generation MiG-21F. It was rather a reverse-engineered MiG-21MF obtained from Egypt, but just like the Soviet ejection seat, the original Soviet radar failed to impress Chinese, so a domestic Chinese radar was developed for the aircraft called the "JL-7". JL-7 is a 2 cm wavelength mono pulse fire radar weighing 100 kg, with a maximum range of 28 km, and MTBF is 70 hours.
However, due to the limitation of Chinese avionics industry in the 1980s, the performance of the domestic Chinese fire control radars were not satisfactory, because due to their relatively large size, the nosecone had to be enlarged, resulting in decrease in aerodynamic performance of the series. As a result, only very limited numbers of this series were built.
The J-7III prototypes comprised a series of a total of 5 aircraft, equipped with domestically developed HTY-3 ejection seat and KL-11 auto pilot. These machines had to be powered by the domestic WP-7 engine (a copy of the MiG-21F's Tumansky R-11) because the intended WP-13F (a license build of the Tumansky R-13) failed to meet the original schedule. The J-7III was planned to enter service in 1985, but due to the delay of WP-13 development, it was not until 1987 when the design was finally certified.
Production of the true J-7C fighter started in 1989, when the WP-13 became available, but only a total of 17 were built until 1996. It was soon superseded by the J-7IIIA, the prototype of the more sophisticated J-7D. This upgraded all-weather fighter was equipped with KJ-11A auto pilot, JD-3II TACAN, ADS-1 air data computer, Type 563B INS, WL-7A radio compass, Type 256 radar altimeter, TKR-122 radio, 930-4 RWR, 941-4A decoy launcher, and an improved JL-7A radar.
The fighter was to be armed with PL-7 & PL-8 AAMs and carried a twin 23 mm gun (a copy of the MiG-21MF's ventral GSh-23-2 cannon). A HK-13A HUD replaced HK-03D optical sight in earlier models. The upgraded JL-7A fire control radar had look-down/shoot-down capability added.
The production J-7D received an uprated WP-13FI engine, and initial certification was received in November 1994, but it was not until more than a year later in December 1995 when the model was finally fully certified due to the need to certify the WP-13FI on the aircraft. But, again, the results were not satisfactory and only 32 were built until 1999.
Even though the J-7C and D had been developed from a much more modern basis than the earlier MiG-21F derivatives, the "new" type offered - except for the more capable radar and the all-weather capability - no considerable benefit, was even less manoueverable in dogfight situations, more complex and expensive, and also had a very limited range. What was needed was a revolutionary step forward.
Such a proposal came from Chengdu Aircraft Corporation's general designer Mr. Wang Zi-fang (王子方) in 1998, who had already worked on the J-7D. He proposed the addition of fuselage elements that would partly replace the inner wing sections and create lift, but also offer additional room for more and better avionics, allowing the carriage of state-of-the-art weaponry like the PL-11 AAM, together with more internal fuel. Furthermore, the adaptation of the WS-13 turbofan, a new engine for which project work had just started and which would improve both range and performance of the modified aircraft.
In 2000, while an alternative design, the J-7FS, had been under parallel development and cleared for service by then, CAC received green lights for a developmental technology demonstrator under the label J-7DS (S stands for Shi-yan, 试验, meaning "experimental" in Chinese).
While the general third generation MiG-21 outlines were retained, the blended wing/body sections - certainly inspired by US American types like the F-16 and the F-18 - and a new, taller fin changed overall proportions considerably. Esp. from above, the bigger wing planform with extended LERXes (reminiscent of the MiG Analog experimental delta wing aircraft that were used during the Tu-144 development in the Soviet union) created the impression of a much more massive and compact aircraft, even though the dimenions remained unchanged.
Thanks to the additional space in the BWB sections, new and better equipment could be installed, and the aerodynamics were changed, too. For instance, the J-7's air brakes under the forward fuselage were deleted and replaced by a new pair of splayed design, stabilizing the aircraft more effectively in a dive. The single air brake in front of the ventral fin was retained, though, as well as the blown flaps from the MiG-21MF.
The ventral gun pod with a domestic copy of the GSh-23-2 was also deleted; this space, together with the air brake compartment, was now used for a semi-recessed laser range finder, so that guided ammunition could be deployed. But a gun was retained: a new, more effective Type 30-I 30 mm (1.18 in) cannon (a copy of the Gryazev-Shipunov GSh-30-1) with 150 rounds was placed into the port LERX, under the cockpit.
Inside of the LERX on the other side, compartments for new avionics (esp. for the once more upgraded JL-7B fire control radar) were added. With this radar and weapons like the PL-11 missile, the aircraft finally achieved the long desired BVR interception capability.
Flanking the new, longer WS-13 engine, the BWBs held extra fuel tanks. For en even more extended range and loiter time, provisions were made for a fixed air-refuelling probe on the starboard side under the cockpit.
Under the inner wings, an additional pair of pylons was added (for a total of seven), and overall ordnance load could be raised to 3.000 kg (6.600 lb).
The first J-7DS first flew in summer 2005, still only powered by an WP-13I engine, for a 22-month test program. Three prototypes were built, but only the first two aircraft were to fly – the third machine was only used for static tests.
The driving force behind this program was actually the PLANAF, the People's Liberation Army, Naval Air Force (中國人民解放軍海軍航空兵). While the Chinese Air Force rather placed its bet on the more modern and sophisticated Chengdu J-10 fighter, the PLANAF was rather looking for a more simple and inexpensive multi-role combat aircraft that could carry out both air defence and strike missions, and replace the ageing (and rather ineffective) J-8 fighters and Q-5 attack aircraft, as well as early J-7II fighters with limited all-weather capability. Consequently, the type was only operated by the PLANAF from 2010 onwards and received the official designation J-7DH ("H" for 海军 [Haijun] = Navy).
Production was still continuing in small numbers in late 2016, but the number of built specimen is uncertain. About 150 J-7DH are supposed to be in active service, mostly with PLANAF Northern and East Fleet units. Unlike many former J-7 variants (including its ancestor, the PLAAF's more or less stillborn C and D variants), the J-7DH was not offered for export.
General characteristics:
Crew: 1
Length: 14.61 m (47 ft 10½ in)
15.69 m (51 ft 5 in) with pitot
Wingspan: 7,41 m (24 ft 3½ in)
Height: 4.78 m (15 ft 8½ in)
Wing area: 28.88 m² (309.8 ft²)
Aspect ratio: 2.8:1
Empty weight: 5,892 kg (12.977 lb)
Loaded weight: 8,240 kg (18.150 lb)
Max. take-off weight: 9,800 kg (21.585 lb)
Powerplant:
1× Guizhou WS-13 turbofan with a dry thrust of 51.2 kN (11,510 lbf)
and 84.6 kN (19,000 lbf) with afterburner
Performance
Maximum speed: Mach 2.0, 2,200 km/h (1.189 knots, 1.375 mph)
Stall speed: 210 km/h (114 knots, 131 mph) IAS
Combat radius: 1.050 km (568 nmi, 652 mi) (air superiority, two AAMs and three drop tanks)
Ferry range: 2,500 km (1.350 nmi, 1.550 mi)
Service ceiling: 17,500 m (57.420 ft)
Rate of climb: 195 m/s (38.386 ft/min)
Armament:
1× Type 30-I 30mm (1.18") cannon with 150 rounds in the port forward fuselage;
7× hardpoints (6× under-wing, 1× centerline under-fuselage) with a capacity of 3,000 kg maximum (up to 500 kg each); Ordnance primarily comprises air-to-air missiles, including PL-2, PL-5, PL-7, PL-8, PL-9 and PL-11 AAMs, but in a secondary CAS role various rocket pods an unguided bombs of up to 500kg caliber can be carried
The kit and its assembly:
Another Chinese whif, and again a MiG-21 derivative - a fruitful source of inspiration. The J-7DH is not based ona real world project, though, but was rather inspired by an article about a Chinese 2020 update for the MiG-21 from Japan, including some drawings and artwork.
The latter depicted a late MiG-21 with some minor mods, but also some characteristic F-16 parts like the chines and the BWB flanks grafted to it - and it looked good!
Since I recently butchered an Intech F-16 for my Academy T-50 conversion (primariliy donation the whole landing gear, including the wells), I had a donor kit at ahnd, and I also found a Mastercraft MiG-21MF in my stash without a true plan. So I combined both for "something Chinese"...
The build was pretty starightforward - except for the fact that the Intech F-16 is a rather clumsy affair (donating the fin and the fuselage flanks) and that no part from the Mastercraft MiG-21 matches with another one! Lots of improvisation and mods were necessary.
On the other side, the F-16 parts were just glued onto the MiG-21 fuselage and blended into one with putty (in several layers, though).
The fin was taken wholesale from the F-16, but clipped by about 5mm at the top. I originally wanted to use F-16 wings with wing tip launch rails and the stabilizers, too, but when I held them to the model it looked wacky - so I reverted to the Fishbed parts. The stabilizers were taken OOB, but the wing span was reduced at the roots, so that the original MiG-21 wing span was retained. Only the landing gear wells had to be adapted accordingly, but that was easier than expected and the result looks very organic.
With more wing area, I added a third pair of hardpoints under the wing roots, and I kept the gun under the cockpit in the LERX. That offered room inside of the fuselage, filled by a laser rangefinder in a canoe fairing where the original gun used to be.
On the tail, a new jet nozzle was mounted, on the fuselage some air scoops and antennae were added an an IR sensor on the nose. A new seat was used in the cockpit instead of the poor L-shaped OOB thing. The PL-2 & -11 ordnance consists of simple AIM-9Bs and slightly modified AIM-120, plus some launch rails from the scrap box.
Paintings and markings:
Modern Chinese military aircraft are hardly benchmarks for creative paint schemes - and the only "realistic" option in this case would have been a uniform grey livery. The original J-7C PLAAF night fighters carried a high contrast sand/dark green/light blue livery, similar to the MiG-21 export scheme (a.k.a. "Pumpkin"), but I found the latter not suitabel for a naval operator.
I eventually found a compromise, using one of the J-7C schemes as pattern but using grey tones instead - still not very colorful, but the "clover" patterns would help disrupt the aircraft's outlines and support the modern look and feel of this whif.
Basic colors are Humbrol 140 (Dark Gull Grey, FS 36231) and 165 (RAF Medium Sea Grey) from above, plus 122 (IAF Pale Blue, FS 35622) on the undersides. With the dark grey pattern placed with no direct connection to the Pale Blue undersides, there's even a blending effect between the tones - not spectacular, but IMHO effective.
The cockpit interior became pale teal (a mix of Soviet Cockpit Blue and white), while the landing gear wells were painted with a mix of Humbrol 56, 119 and 225 - for a yellow-ish, dull metallic brown. The wheel discs became bright green (Humbrol 131), and any di-electric panel and the radome became deep green (Humbrol 2).
The decals come from a Begemot MiG-21 sheet (roundels), while the tactical 5-digit code comes from an Airfix 1:72 B-17 sheet. The yellow code is a bit unusual, as well as its place on the fin, but both occur on Chinese fighters.
The code itself is based on the information published in the 2010 book “Chinese Air Power” by Yefim Gordon und Dmitriy Komissarov, where the Chinese code system is explained – I hope that it is more or less authentic.
The kit received a light black ink wash and some dry painting with lighter blue-grey shades, but no weathering, since modern Chinese aircraft tend to look pretty clean and pristine. Since the kits both did not feature much surface details, and a lot of the few OOB details got lost during the PSR process for the BWB wing sections, I painted some details and panel lines with a soft pencil - a compromise, though. Finally, the kit was sealed with matt acrylic varnish.
The result is a pretty subtle whif, and with the F-16 parts added the result even looks very conclusive! From above, the extra fuselage width makes the Fishbed look very massive, which is underlined by the extended stabilizer span. But I think that retailing the original MiG-21 delta wing was a good decision, because it helps retaining the Fishbed's "fast" look.
I am just not 100% happy with the finish - but for the crappy kits I used as basis it's O.K.