View allAll Photos Tagged Reduce
40 Melton Street, or Railtrack House
Built 1974-80
Designed by R. Seifert & Partners for British Rail
In the process of being demolished as part of the Euston redevelopment
The locks link the tidal Bow Creek to the River Lee Navigation which is a canalised river. These locks were first built in 1850 and then rebuilt in 1930. At high tide, the tide from Bow Creek used to flow through Bow Locks to raise the level of the canals, such as the Limehouse Cut. But in 2000 these locks were modified to keep the tide out; to reduce silting in the canal system.
1、SPS-FGB Fiber Glass Board Squeegee instructions
The traditional squeegee is all urethane rubber, which is printed for a long time，After the squeegee absorbs the solvent in the ink, the hardness is reduced, the expansion deformation, the printing angle α is unstable, and it is not suitable for precision screen printing. The Fiber Glass Board Squeegee is combined with the glass fiber board and the scraping glue, which has the elasticity of the scraping rubber and the support line of the glass fiber board. The long-time printing can maintain a stable printing angle and the printing ink thickness is uniform.
3.1.2 Chemical solvent resistance
Test time: 7 Days
Test solvent: xylene, methyl ethyl ketone
Test items: hardness change, quality change
3.2 Fiberglass board
The high quality fiberglass board has uniform thickness, good elasticity and chemical resistance.
5.2 storage
①Store indoors at 40℃or lower, do not store in high temperature and high humidity, direct sunlight and ultraviolet radiation. (Recommended storage conditions: 23℃±2℃, humidity 60% or lower)
②Do not store near heat-generating equipment or dusty places.
③It is forbidden to bend and press, stack it straight, stack no more than 20PCS.
④The scraping rubber is stored at a low temperature for a long time, and can not be used immediately after being moved to the workshop. It should be placed at 25℃for more than 3 hours before use.
5.3Grinding
Welcome to use the SPS-SG squeegee grinder for better grinding results
①After using the squeegee, please clean the surface ink and rest on the SPS-DR squeegee rack for 12 hours, waiting for the solvent to be released.
②M type traditional squeegee needs to be grinding in the squeegee holder; FGB/AS with support plate squeegee can be removed for grinding.
③Manual grinding machine for grinding
250 mesh grinding wheel: single grinding coarse grinding 0.5mm / fine grinding 0.2mm
400 mesh grinding wheel: single grinding coarse grinding 0.2mm / fine grinding 0.1mm
④The squeegee can be polished with the SPS-Sander to smooth the edge of the knife edge.
www.sps-squeegee.com/sps-fgb-fiber-glass-board-squeegee.html