View allAll Photos Tagged Rebrickable
Free instructions: Rebrickable
Updated my minifig-scale droideka for the premiere of Episode I 25 years ago, May 16th, in Los Angeles and for the Eurobricks contest. I redesigned the head, which was the weakest element of the previous design; its eye-sensors are more accurate now. It's the same height as the B2 next to it, so perfect minifig scale. Can be rebuilt into a ball, which while not a perfect sphere, will roll. But I mainly focused on how the display looks unrolled. It also fits in the shield I designed for them, so I will be updating that MOC with new photos soon.
A modular school.
Building instruction is available at: rebrickable.com/users/peedeejay/mocs/
Every city needs a school! The build spans among 3 baseplates and consists of 10 modules. The baseplates can be separated from each other for easy transportation. The complete model weighs about 10kg and has 14417 parts.
The front part contains the main entrance, some trees and a bus stop. The roof areas contain the ventilation units, photovoltaics and the clock.
The ground floor contains the main entrance hall with washrooms for boys and girls. The right wing of the ground floor contains a standard classroom for maths and literature. The left wing of the ground floor contains the music classroom, featuring a piano, drums and some other instruments.
The middle floor contains a cafeteria, where the students can get a quick bite and some refreshments. The left wing of the middle floor contains an IT-classroom and it seems the students are well stocked on mobile devices. The right wing of the middle floor contains the science classroom. At the moment some experiments are ongoing in the chemistry class.
The upper floor contains the library.
Building Instructions are available on Rebrickable:
rebrickable.com/mocs/MOC-130670/AbFab74/lamborghini-miura...
Instructions available at my Rebrickable.com page.
At 860 pieces, and 300 pages PDF instruction, this was a massive effort me.
I am very pleased to finally be able to present it to everyone.
Have a good day!
When A.R.M. made their first mech the Guardian 5 rebrickable.com/mocs/MOC-141776/Brick-Fil-A-Builds/guardi... they were able to stand a chance against Hammer and his wolves, but upgrades and new enemies caused A.R.M. engineers to look for something with a bit more substantial weapons. Their wining design was The Actuator, a four legged walker capable of destroying robots, drones, and fortified bunkers. Due to the guns long range, the Actuator needs a base unit to defend it from close targets.
Free instructions @ rebrickable.com/mocs/MOC-145179/Brick-Fil-A-Builds/the-ac...
A modular school.
Building instruction is available at: rebrickable.com/users/peedeejay/mocs/
Every city needs a school! The build spans among 3 baseplates and consists of 10 modules. The baseplates can be separated from each other for easy transportation. The complete model weighs about 10kg and has 14417 parts.
The front part contains the main entrance, some trees and a bus stop. The roof areas contain the ventilation units, photovoltaics and the clock.
The ground floor contains the main entrance hall with washrooms for boys and girls. The right wing of the ground floor contains a standard classroom for maths and literature. The left wing of the ground floor contains the music classroom, featuring a piano, drums and some other instruments.
The middle floor contains a cafeteria, where the students can get a quick bite and some refreshments. The left wing of the middle floor contains an IT-classroom and it seems the students are well stocked on mobile devices. The right wing of the middle floor contains the science classroom. At the moment some experiments are ongoing in the chemistry class.
The upper floor contains the library.
Instructions on: rebrickable.com/mocs/MOC-126727/alexsimion9/sad-destroyer...
Darth Morās personal death Squad,
A class built exactly for his warmongering and terror.
Darth Morās Star Fighter is flanked by tow of this when he needs a ā little ā more firepower.
Hope you guys like it, let me know what you guys think.
Instructions - rebrickable.com/mocs/MOC-214499/KMPMOCS/76922-zonda-r-evo...
YouTube - www.youtube.com/@kmpmocs
Instagram - www.instagram.com/kmpmocs/
Obi-Wan's Jedi Starfighter set 75333 modified without using any extra pieces, plus a Kamino Landing Pad. Instructions for both are on Rebrickable...
rebrickable.com/users/ron_mcphatty/mocs/
More photos of my modified set and the Kamino landing pad. The set can be modified without adding any extra pieces or rebuilding the wings. Its a fairly simple change and reduces the height of the cockpit area significantly, along with helping the fighter rest lower to the ground. Overall the ship looks a bit sleeker now.
The landing pad is compact and cheap to build, though wedge plates are under some stress so it's pretty fragile and needs to be built in place. The USB LED kit can be found on eBay, check the landing pad instructions zip file for what to look on eBay for.
Building Instructions are available on Rebrickable:
rebrickable.com/mocs/MOC-91417/AbFab74/ferrari-288-gto-sp...
Lego pacific rim gipsy danger (rerender) (instruction avalible on rebrickable) #legopacificrim #lego #pacificrim #legomech #legomecha #moc #legomoc #legostarwars #legomarvel #ironman #china
Instruction: download here
Follow me on Instagram: anton.kablash
Dimensions: 18.5x46x15 studs
Weight: 952 g
Functions:
1. HoG (detachable)
2. Working steering wheel in the cab
3. Working V8 engine
4. Openable all doors, hood and trunk
5. Detailed exterior and interior
6. Adjustable seats
7. Modular building
My Dagobah Jedi Training set 75330 mod, I've added a midi scale X-Wing and additional swamp which is based around the small piece of wing included in the set! Free instructions are in the zip file on this Rebrickable page...
rebrickable.com/mocs/MOC-129292/ron_mcphatty/midi-rebel-s...
Instructions available on my Rebrickable page at: bit.ly/3hmcO1f
Or go to www.rebrickable.com and type āRubblemakerā into the search bar
Here is my 1436 piece, 36cm long, proportionally accurate (hopefully, for the most part) Razor Crest.
I used Hasbroās super detailed Haslab Razor Crest model as a reference to try and create a moc as accurate as possible and Iām quite pleased with how itās come out.
I also designed an angled stand for it that slots in and out of the underside of the ship and it comes with detachable landing gear, fully functional side and rear doors andā¦ a tiny little Mando and Grogu waiting inside.
Just some photos of the ships now that Iāve built one, and sprayed the Nubian silver! Itās a simple vinyl dye, the kind of paint you use on fake leather car upholstery, but it soaks into the Lego and gives a durable finish. I wish Iād remembered to spray the N1 Starfighter before I ran out of paint, maybe next time. Instructions for the Nubian, Infiltrator and N1 are on Rebrickable... rebrickable.com/users/ron_mcphatty/mocs/
Instructions available on Rebrickable at: rebrickable.com/mocs/MOC-100717/Rubblemaker/mandalorian-n...
Here is my final entry into this already (very) over-crowded market of Mandalorian N-1 Starfighter mocs. I wanted to build mine before putting it on Rebrickable to ensure it all worked well. Made of 646 parts (including my signature angled stand) it is 37cm long and 27cm wide. My aim was to create a model that is as smooth and sleek as possible whilst using the SNOT technique for the wings. With only 2 exposed studs on the top of the ship (not including greebling) Iām quite pleased with the result.
There are a lot of surface detail differences between the 2 sides of the ship, many of which Iāve tried to match as closely as I can at minifigure scale. For the 2 people left in the world who still havenāt built one of the 9 million mocs of this on Rebrickable, if you want a snot version that has been fully build tested, mine is available now!
Fellow Lego Star Wars addict Remco Rohaan kindly gave me his beautiful photos of my 'micro' (1:250) scale blockade runner, The Liberator from Star Wars Rebels.
This is actually a kit from LesDIY.com, who kindly sent one to Remco for review (he liked it!!). His professional set up has captured the kit far better than I could and I'm very grateful that he's given me permission to show these off on my profile.
Remco has build some amazing MOCs and all of his photos are superb...
www.flickr.com/photos/remcorohaan
And the kit is available here in both Liberator and Tantive IV colours...
www.lesdiy.com/products/moc-73874-micro-blockade-runners-...
Start building Yoshi and friends @ rebrickable.com/mocs/MOC-154971/Brick-Fil-A-Builds/yoshis...
Hello, it's-a me Brick-FIl-A-Builds! Coming out with Super Mario Builds season 2, this one bigger and better then the first one.
The build,
To start off the new series I decided to start with my favorite character from Mario, Yoshi! Yoshi and his herd of yoshis including, Red, Black, Baby Bubble and Baby Gold yoshi.
here you go:
Rebrickable: partlist + instructions pdf
Yes, it's still the falcon...
only some studs bigger than my old model of 2019 but this one comes with a lot updates and features a complete new covering.
It took about 2 years on an off working on this one.
This time I tried to get as close as possible to the circle form
and I tried to close most of the gabs on the covering.
The model features many ucs styled details within a scale that fits on every shelf.
Due to the system scale the proportions are still a bit bulk. therefore it has a full interior!
The model is more strength now. E.g. the cover slices can be fixed in position.
Still this is more a display model than play model.
I tried to built the instructions as much understandable as possible. But as I am a not the best practiced builder, there can be tough sections here and there.
funfacts:
3985 Parts
57x 42 Studs
2.450kg
If you own my moc from 2019 you already have about 60-70% of pieces.
You' ll also get a discount for the new instructions! pm me
Stud.io file on request
also I can share different part lists for the model without interior
or inner structure only if you want to try to build it with your own covering.
I've made some small updates to my Midi scale Republic Gunship.It now has a slightly more accurate front, a higher cockpit, it's 10% smaller and cheaper (27cm long, around Ā£45 to build) and has new rocket launchers on top. Instructions for the LAAT are on Rebrickable, link below or on my profile.
rebrickable.com/mocs/MOC-107732/ron_mcphatty/midi-republi...
As always all the parts are all common and itās a pretty strong build, even with the open crew area itāll stand up to some swooshing. The bubble turrets can be added/removed easily and the doors adapted to close over the arms. There's also an angled stand included and a teeny tiny BARC speeder, for those of you who are more into your Phase 2 galactic warfare.
Version 2 instructions are now available, along with some new colours; 501st blue, 212th orange, Muunilinst 10, Corsicana Guard and Ahsoka's 332nd.
Black motorbike MOC. Want to build it? Check www.rebrickable.com/mocs/MOC-9265/diegoflorez84/black-mot...
The Argonath is complete!
Instructions can be found on Rebrickable! rebrickable.com/mocs/MOC-29539/Mr.%20Studs/the-argonath/
________________________
I am available for custom Lego designs!
Keep Dreaming in Bricks!
#lego #moc #playwellbricks #legoideas #creativity #legoart #art #design #creative #legotechniques #legofacebook #theartoflego #legomasterbuilder #legofan #legoaddict #legolovers #legocreation #legolife #legophoto #legopicture #toys #toyphotography #geek #Legogeek #theargonath #thelordoftherings
Follow me on Instagram.
Instructions on Rebrickable.
Lego Star Wars Imperial LA-CH MOC
My minifig scale MOC of the Imperial LA-CH - or Dropship - based on Artwork by EC Henry š and carrying two modified AT-ST's by @ldd_modelmaker.
I have no exact part count, but I think it is about 3'700 pcs - 1'800 for the ship; 1'300 for two Walkers and maybe 600 for the stand.
Most delicate is the stand and the balance of the Gunship on it. The ship is "front-heavy" and the space between the Walkers only allowed for one Technic beam of width š®.
But after rounds of stripping the ship down to its bare minimum of bricks, I achieved an nice balance to stay levelled.
A great thanks to @ldd_modelmaker for allowing him to use and mod his AT-ST's šÆ. And as always, EC Henry and and Angelos Karderinis for sharing more details and renders š.
Check out my earlier posts for the MOC of the Imperial LAAT - or Gunship - also based on Artwork by EC Henry.
rebrickable.com/mocs/MOC-19189/Keep%20On%20Bricking/41333...
KeepOnBricking Youtube
KeepOnBricking Instagram
Instructions here: rebrickable.com/users/ari23_ww2_bricks/mocs/
Video about it here: youtu.be/76GyacbH1IQ?si=Tcm_g4DnggSTuoVR
I love this ugly beast, it was surprisingly tricky to get the cockpit and wing hinges right but I loved every minute I spent tinkering. The wings fold and the cargo pod is removable, white sand and azure coastline not included! Instructions are on Rebrickable... rebrickable.com/mocs/MOC-67227/ron_mcphatty/micro-zeta-cl...
Ahsoka Tanoās T-6 Jedi Shuttle 75362, heavily modified with a lot of extra bulk and detail, and most importantly double-sided wings! 558 extra pieces required, landing gear and vertical stand included, free instructions on Rebrickableā¦
rebrickable.com/mocs/MOC-156143/ron_mcphatty/ahsoka-tanos...
Ahsoka's cape and Huyang's apron are by @thebrickway (on instagram), huge thanks for the truly excellent accessories!
The T-6 in the Ahsoka series is a fantastic live-action update to the original ship. The Lego set is obviously lacking in the wing depart, the back surface being totally blank, so Iāve taken the opportunity to fix that and add some extra details to the whole ship.
The wings are a back-to-back construction held together with brackets. Iāve also added more details all over the hull and rebuilt the cockpit to match the new look and proportions.
Overall Iāve added around 160g of weight to the set. Surprisingly itās still very swooshable and with all the extra weight it is very satisfying to hold!