View allAll Photos Tagged Pullbacks
After some years I think i've finally identified not only who makes these cheapo vintage era trucks but also what they are actually based on! I believe a company called Qizhuo Toys based in China are behind them and that they are loosely based on a 1937 Reo Speed Delivery Truck. I am of course happy to be corrected on either ;-p
Chunky but charming with a myriad of body styles which would never ever have been offered on the real vehicle. Its best to treat these as cheap toy cars for a young audience not worried by such inaccuracies. This Fire Engine comes with fully rotating searchlights and lightweight plastic body. Quite crisply cast for its price point and features the obligatory pullback mechanism.
Found in the novelty aimed Ale-Hop store in Sitges.
Mint and boxed.
Pretty self explanatory. We used a gel here to get that pinky look behind her. And we used a strip grid (as you can see from the pull back) to light her entire body from head to toe properly. Pretty cool eh?
Read more here (and see more photos, including full length shots).
Don't be a stranger!
All it took was one Short Signal and then we hung on as the market fell to new lows throughout the day. Each subsequent trade was an Atlas Line Pullback trade, a propriety setup taught in the webinar that's included with purchase of the software. See more emini trades.
I couldn't resist grabbing a second example of this Hot Wheels copied 2010 Ford Mustang Shelby GT-500 made by Tian Hong Toys.
Now appearing at Poundstretcher sold under their own Motor Madness brand and at just 69p each is a relative bargain for an unlicensed casting which offers a metal body, full interior and pullback function.
Mint and boxed.
No matter what angle I look at this Ju Xing produced toy bus I still can't identify whether its based on a real vehicle or just purely generic. Entirely believable regardless, so much so that other Chinese toy manufacturers also make very similar looking castings. An inoffensive mix of metal and plastic for its body plus full interior and pullback mechanism.
Found recently at Hiper Garaf.
Mint and boxed.
The occasional white man can jump, Troy is one of them and he's only 5'10"ish.
Strobist:
-LP160 camera right at hoop
-LP120 camera left near fowl line but back further
Strobist:
-LP-160 camera right fired at the hoop.
-LP120 camera left fired at the subject.
-LP120 on the floor in front of where i was shooting from, fired with the built in slave
-all triggered with RPS RF-604's unless otherwise noted.
My entry to "Wacky Races" contest. Captain BrickBeard on his small vessel. Slow but powerfull :)
Wicked racing machine built with pullback brick.
This plane is my second alternative model built out of LEGO Technic set 42106. It is also my first plane with pullback motor that is connected to both landing gear and propellers. Building instructions are available at buildinst.cz/en/catalog/detail/329
Found a nice big snake petroglyph in a pretty sandstone canyon. The snake must be at least two feet long and very deeply pecked.
See a pullback of this spot here.
EURUSD pushing up, and may target the 1.2900 to 1.2914 levels. Pair should then pullback before the channel breakout www.tradermanagement.com/forex-charting-library/spot-fx-e...
Aparecido además en la colección "Deportivos de Lujo" de La Tercera (no. 7):
ripituc.blogspot.com/2013/04/nueva-coleccion-la-tercera-d...
Despite its entirely believable styling and proportions and the fact other Chinese toy makers produce similar looking castings, I've yet to identify what real vehicle this diecast bus is actually based upon. I suspect possibly a Chinese marque but as ever i'm definitely open to suggestions!
Made by a company called Ju Xing its offered in a sizeable selection of different colours, liveries plus normal and pullback variants.
One of a few found recently at the large Hiper Garaf Chinese bazaar.
Mint and boxed.
Anyone who follows me on here and indeed Instagram may be shocked to see a post relating to a diecast aeroplane! I do have several thanks to their inclusion in many airport themed gift sets, mainly from Welly and Realtoy but have never chosen to photograph any.
As a I use Flickr as my online digital database of my diecast collection i've decided to upload pics of vehicles I possess which wouldn't normally interest me such as motorbikes, aeroplanes, overtly generic fantasy vehicles to give a more accurate reflection on whats in my collection and numbers etc...
This "Jumbo Jet" which i'm assuming is an unlicensed Boeing 747 is part of a Chad Valley branded four vehicle set Sainsbury's have been selling for years but recently changed their packaging which was a flimsy excuse to buy another.
The vehicles contained within are made by Daxiang, whether thats the same with this model aeroplane I don't know but its a fairly decent effort for its low price point and one which features a pullback and go mechanism.
Mint and boxed.
Fused pipeline strings are staged for pipeline pullback. Strings are about 600 feet long. This pipeline is 30-inch inside diameter. November 2014.
Do you know what this is?
This is my tenorsax illuminated through the keyflaps.
I wanted to do a Jazzfoto today, but then preparing my stuff for the Golden Wedding Shooting tomorrow took to long. So I stuck with the theme and made an insight out foto, which went alot quicker.
Light: 580 EX handheld to the flaps on a ETTL cable, manual 1/16, 24 mm
Pullback here: www.flickr.com/photos/32830690@N08/5766469948/
See my 365 Project Blog.
Aparecido además en la colección "Deportivos de Lujo" de La Tercera (no. 7):
ripituc.blogspot.com/2013/04/nueva-coleccion-la-tercera-d...
This helicopter is my second alternative model built out of LEGO Technic set 42075. It features opening windscreen, engine with moving piston and cool spring loaded mechanism for spinning rotors. Building instructions are available at buildinst.cz/en/catalog/detail/265
A pull-back showing the lighting and setup used to create this portrait. The final image can also be seen in this collection. Larson soft box , scrim, beauty dish and kicker light.
This is one evil plant. A native of hammocks, this stout vine has wicked hooked thorns. Camp Owaissa Bauer Addition, Miami-Dade County, Florida.
A Scorpion made out of the 42046 - Getaway Racer set. The tail snaps forward, using the pull-back motor. All legs moved independently and saw do the pincers. Head section can tilt up and down. Pictures taken against a background of a mustard-colored jacket to simulate sand without getting me or the LEGOs dirty.
A Scorpion made out of the 42046 - Getaway Racer set. The tail snaps forward, using the pull-back motor. All legs moved independently and saw do the pincers. Head section can tilt up and down. Pictures taken against a background of a mustard-colored jacket to simulate sand without getting me or the LEGOs dirty.
USDJPY continues lower, with moves up looking corrective. Pair could pullback from 8295; the trend line & 261.8% level www.tradermanagement.com/forex-charting-library/spot-fx-u...
A Scorpion made out of the 42046 - Getaway Racer set. The tail snaps forward, using the pull-back motor. All legs moved independently and saw do the pincers. Head section can tilt up and down. Pictures taken against a background of a mustard-colored jacket to simulate sand without getting me or the LEGOs dirty.
Pullback view of macro setup on yellow flowers and insect on them. Early evening around 6pm. Sunlight is visibe top left center. Exposure, 1/500th at f8 Nikon SB-800 strobe at 1/4 power up to right on stand with diffuser and ebay triggers.
A Scorpion made out of the 42046 - Getaway Racer set. The tail snaps forward, using the pull-back motor. All legs moved independently and saw do the pincers. Head section can tilt up and down. Pictures taken against a background of a mustard-colored jacket to simulate sand without getting me or the LEGOs dirty.
The seamless background is a sheet of freezer paper held down by duct tape and two jars of Molly's blueberry jam.
The light stand is a roll of duct tape and two more jam jars.
There's a front-quartering strobe about six feet off camera right.
The funnel is suspended by a Radio Shack soldering stand. Using a funnel makes it easy to get a neat, conical pile of powder.
The final photo is HERE.
This one's my son's. Diecast Toyota AE86 - Initial D version by MiniAuto. Pullback action, lights and sound. Quite a bundle and good quality.
Break Vehicle 1/64
Car: Mazda CX-5 (KF)
Year: 2017
Color: Machine Gray Metallic
This brand is new to me which is why I decided to buy this one. This is a plastic model so it's very light and it also has pullback mechanism. The detailing is pretty good though and you wouldn't even know it's a plastic model just looking at it. This also seems to be licensed as there was a note about Mazda approval on the packaging. It comes in a box packaging, pretty similar to Tomica, but it is tad bit bigger than Tomica. This model in particular didn't fit in a standard Jammers case slot as it was a bit too long so maybe the scale is around 1/60 or something similar.
A Scorpion made out of the 42046 - Getaway Racer set. The tail snaps forward, using the pull-back motor. All legs moved independently and saw do the pincers. Head section can tilt up and down. Pictures taken against a background of a mustard-colored jacket to simulate sand without getting me or the LEGOs dirty.