View allAll Photos Tagged Outdated
Outdated scale and building techniques? Check! Still dusty from all the time spent inside a drawer? Damn right! I built this model about 5 years ago, but never happened to post it online (even though a few years ago I've teased it). Check its page in MOCpages if you're interested to know more about its story: www.moc-pages.com/moc.php/445315
Credits for Calin I largely inspired this model from his Big Bopper model back in the day: www.flickr.com/photos/_tiler/9356397177
Few more of TESTS of my 'Gift' NIKON F65 on old outdated KODAK GOLD 200 rated 100ASA by sticking paper over the DX coding . Taken by window light in our lounge with AF NIKKOR 70-3000mm f4-5.6 G on Tripod.
Hunter Falls is located in Troy section of Hamilton.
One of 5 visits to Hunter Falls since 2008.
Taken on 35mm colour film with Mamiya camera on April 29, 2011. The film was outdated by 17 years (expiry date was 1994), however I tried it and all the pictures came washed out and grey. Today I worked on the photo and was able to enhance the photo a lot as seen here.
Loaned a TAMRON SP Adaptall 17mm f3.5 lens by a fellow Camera Club member . I used a NIKON FG that my Wife was given and never uses now so I have 'Taken it over' The Lens has built-in Filters and is 'Rectalinear' . FILM was KODAK T400CN outdated donated by a Camera Club member and I thought it was 'Fresher' than it was -- so 400 ASA gave some 'Thin' negs so on the rest of the cut film I will rate it at 200 ASA . I home-Processed in C41 . I have few more to upload. Here is a Grave in St Thomas of Canterbury Churchyard
A little bit ago, I came up with a way to brick-build the red stripe on the back of the official Speed Champions 1970 Charger. Not content with a simple modification, I wanted to build a whole new MOC! Not sure I'll post instructions for this because 1) those yellow fenders are stupid rare/expensive, and 2) this is a particularly parts intensive and somewhat un-fun build. The tail in particular is just jammed full of tiny parts.
Loaned a TAMRON SP Adaptall 17mm f3.5 lens by a fellow Camera Club member . I used a NIKON FG that my Wife was given and never uses now so I have 'Taken it over' The Lens has built-in Filters and is 'Rectalinear' . FILM was KODAK T400CN outdated donated by a Camera Club member and I thought it was 'Fresher' than it was -- so 400 ASA gave some 'Thin' negs so on the rest of the cut film I will rate it at 200 ASA . I home-Processed in C41 . I have few more to upload. This is a White car outside the library Apartments here in Brentwood
Taken with My Ciro Flex Model E using outdated Ilford XP2 Super 400 ASA film. Pearl St. Cambridgeport, Mass.
This chart is outdated, please go to new one:
www.flickr.com/photos/spaceruner/39137826025/in/dateposted/
I often like to build my MOCs allegiant to one of classic LEGO Space themes. Usually I make some modifications to colors but I always start with the original color scheme.
So I made myself this simple and rough color chart and maybe some of you find this useful too. I also use this when on doubt what to build next.
This is nothing official (more like my point of view on LEGO Space) and I will be happy to hear comments and constructive criticism. Also if you find any mistakes or feel like there is something missing, let me know :)
Yesterday (June 30, 2021), was truly the end of an era in northern New Jersey. For the entirety of my life, The Fireplace was a constant fixture. It was a restaurant in Paramus, NJ. It was the local burger joint, but they didn't just do burgers. Not fast food, but not diner food. The decor was very outdated and kitschy, but that was part of the allure. It never changed. Very little about this place had changed since the 1950s. The restaurant had been in existence for 65 years. And, I guess, like most things, everyone just assumed it would always be there....just like it always had.
Until, it wasn't. A few months ago, there were rumors on FB that they were going to go out of business. Another business victim of COVID. But the owners put everyone's fears to rest. And then, late at night on July 29th, they put up a new message saying that their last day would be "tomorrow". Open until 4pm. I was fortunate enough to be off for the summer, so I decided I wanted one last Fireplace meal. And I wanted pictures. I was not alone. I got there and found a HUGE line. The whole community had come out. It was a three hour long line. (And the announcement changed from "closing at 4pm" to "closing at 4pm or when food runs out".) And I endured it.
In the heat. I had had no sleep (because that's just how things go for me), I had eaten nothing all day, and by the time I was almost at the counter, I had low blood sugar, was dehydrated and on the brink of heat exhaustion and fainting. I had sun burn and was pretty miserable. But I held in there. And I'm so glad I did.
It was worth it.
I'm sure many people were and are wondering what the big deal was about. If you were a patron of The Fireplace or grew up with it as a fixture, you understand. But if you didn't, it probably seemed like a lot of ridiculous fanfare for nothing. It's very hard to put into words why it was important. But much the way music can be the backdrop to a person's life, the places we find ourselves, consistently, through all the chapters of our lives provide crucial elements of the stage of our lives. The "home" we all return to. We can look back on those places with memories from every aspect of our lives. Our childhoods, the college years, dates and break-ups, and places to collect our thoughts when life gets really hard. The Fireplace was that place. You really don't realize the importance of some of these places (and people) until they are gone. So THAT is what all the big to-do was about. Because EVERYONE (in my area) had this shared experience with this one place. I realized today that I could sit in that restaurant, look out the window, and look directly at pieces of my life that go way back to when I was just a little girl. It's funny, I never lived in Paramus. I never went to school in Paramus. I never had friends from Paramus. But because both my parents grew up in Paramus and have deep roots there, Paramus has been just as intrinsic and formative a part of my life as New Milford ever was. In fact, oddly, in many ways, it has provided more history for me than New Milford has. So, when I learned that The Fireplace was closing its' doors and I only had this one last chance to capture those memories on "film" and have one last meal there, I decided I really needed to do that. Furthermore, I knew that many people were not as fortunate as I was to have the day off. Or to be nearby enough to go. And I felt like I could give a lot of other people that experience through my pictures and by relating the experience. And I was right. There were many of you who really seemed appreciative that I was there and you could share the experience from my reports and pictures.
So, here's what's funny. I didn't sleep the night before. Maybe an hour, if I was lucky. And I needed to be up early. So, I was exhausted to begin with. I laid down to rest when I was able to, but I couldn't really SLEEP. All I could think about was, "If I fall asleep, I won't wake up in time to go to The Fireplace. I will have missed the whole thing. And I really want those pictures. I'd really like one last meal there." So, I decided to forgo the shut-eye and just go. I had NO IDEA it would be the community event that it was. And I would have fared better if I'd gone earlier. But it must have been meant to be because I pretty much got in at the end of the line of people who were actually served, and was pleasantly surprised to see that I wasn't left with the dregs. It wasn't the meal I had planned, but in some ways, it was better. I do wish I'd been better prepared (sunscreen, water, something to nibble on, and a sun umbrella), and it was by no means easy to put in a full day with no sleep, no food, sunburn and bordering on heat exhaustion, but I'm really glad I did it. It was truly a moment to commune. And in the age of Covid, not to mention our current political climate, that was a 'breath of fresh air" (that's a poor covid joke). And I really wasn't sure it was ok to be amongst all those people. I tend to not congregate with large numbers of people (although it's not a hard-and-fast rule, and I will be making another exception this coming week), this was not something I wanted to let Covid steal from me. And it was so nice for people to come together and just be kind to one another. To share a moment. It happens so infrequently anymore. At the end of it all, it was really a very surreal moment. Anyone who was left in the building was roaming around taking pictures and videos with their phones. Almost zombie-like. People didn't want to leave. Alas, change is a constant, and they say change is good. So, as sad as I am (and others are), I'm warmly happy to have the memories and warm fuzzies.
I will be adding more pictures to this album over time. They will all be public and I invite any and all people to share them. If you want the images, you can go to my FB page, where they are public, as well. From there, you can take them. Enjoy the memories.
A much-needed replacement to the outdated Heavy Field Mortar, previously used in the Great Steam War. This modern artillery piece was manufactured with stronger, lighter metals and incorporated a hydraulic recuperator system that negated the need for a weighty carriage to absorb the recoil. It fired a projectile so large that the tip of its warhead actually reached beyond the muzzle when loaded. Its development was delayed after the initial prototype was destroyed by saboteurs.
Play Features:
-Spring shooter
-Firing pin cable
-Folding support legs
-Ball towing attachment
First, there was the Beetle, and then more Beetles. You know, the one they designed in the 1930s. The car was outdated, and needed replacing. The solution was the Type-3, sharing the platform chassis, but bigger, and wearing more contemporary clothes. First up, in 1961 was a two-door sedan, followed by a 2-door wagon (known in the US as the 'Squareback', and finally, the fastback - again with two doors. Unfortunately for VW, the Beetle still outsold them all.
A total of 2.54 million were built over 13 years - healthy by most manufacturers standards, but the Beetle was selling nearly a million per year through this period.
The Type-3 was in turn replaced by the Type-4 in 1969, and even more ungainly vehicle (though it did now have four-doors), which sold even more poorly. Still, the original Beetle was the mos popular model. It wasn't until the mid-1970s with the launch of the VW Golf, did VW have a viable answer to a successful replacement for the everlasting Bug.
Volkswagen Type-3 1500 Sedan (1961) has been created for Flickr LUGNuts' 120th Build Challenge, - 'Happy 10th Anniversary, LUGNuts', - where all the previous challenge themes are open for use in creating builds for the Challenge.
The Challenge theme chosen is number 53 - 'For the Love of the Bug' - for any vehicle that is related to the VW Beetle/Bug.
Out with my OLYMPUS OM-1 loaded with a short length of the bulk Fuji 'Surveicolor 400' I was given. I rated film at 200 ASA as it was outdated and home-processed in C41.
G-Zuiko Auto=W 28mm f3.5 at f5.6
Using a Yashica 635 + +1 macro lenses + Way outdated Fuji 160C.
This rolleicord is in not-so-good shape, but it is usable at most speeds (1/25 is sticky, but others sound correct). I used it and fortunately (and surprisingly) works great! :) I went from using cameras older than me to using cameras older than my parents! We'll see if I try some others older than my grandparents...
This guy is insane. Seriously. He is not good with people, either. He has a very authoritative aura around him, he is used to absolute cooperation. Like a military guy, or something. Like, from the 1500s too, he’s very, outdated. But he can still kick ass, thats for sure. And I have improved from his training. But he’s at a loss for what to do with me, that is evident. As well as that, he looks around constantly as if some crazy ex is after him. Though if this guy ever had a girl I would be very surprised. He’s cold, brooding, creepy. Wonder what happened to him. Either way, I gotta get out of here.
“You’re improving, Oliver. Good work.”
Thanks.
“We’ll end here for now, let your bruises swell down a bit. You will want your strength for our next lesson.”
Ok, cool. Sounds good.
Odd, he’s never done anything remotely close to that. Ever. Something’s up. Like the footsteps I hear. 3 men, wearing boots. Holy crap I’m observant. Man, I’ve changed. Whatever. I see Mr. Merchant guy moving towards the door, I nod as he begins to open his mouth, he understands. I grab my bow and nock an arrow. Be careful with this Ollie, you might want to escape if you can. The door to the bunker opens, and I see 3 masked men. One, he’s the one who tortured me. Orange and Black Mask. He has a sword too. Wonderful. His friends had a CoD-looking skull balaclava, and the other a green mask with yellow eyes. Ok then. The merchant guy charges at half-and-half mask and the two start swordfighting. I take down the guy in the green mask with an arrow, knocking him down, but i don’t think it did much. I aim at the one in the skull mask, when I see two-face cut down the creepy dude.
Black and Orange Mask: “Hello Oliver Queen. I don’t mean to harm you. Not anymore. I’m assuming that you remember me by your hostility, no? I apologize for our original meeting, I was quite rude. I was rushed, and had no real leverage to offer you. However, now I do.”
What, you expect me to trust you now? After you tortured me?
“As I stated earlier, I was rushed and, too personally involved. My son, Joseph, his throat was slit. Doctors have kept him stable, but he may never speak again at best, and die at worst, and most likely. I need to find whatever the Healer uses, so I can save my son. And in return, I can offer you transport off of this island.”
Why didn’t you offer that before?!
“I was working with ARGUS, and they weren’t going to let you go without using you, so I couldn’t promise you such, not truthfully. I wouldn’t lie to you, not with so much at stake. I’m honorable, Oliver. You can trust me on this. I will provide you safe passage off this island if you can take me to the Healer.”
Ok, this is even shadier. I’m not too sure about this. I’ll play along for now though.
I’m not sure how much I can trust you. If you can prove to me that you can get me off the island, and give me assurance, I will lead you to the Healer guy. Ok? But first, can we get out of this damn bunker, and maybe get something to eat?
“Ok, that’s fair enough, after what has happened. I’ll take you to my camp. There’s someone there who wants to meet you anyway.”
He picks up his radio, and talks into it
“Caldwell, we have Queen. Bringing him to you, he’s being cooperative. Deathstroke out”
____________________________________________________
Part of Volume 2: Hell on Earth
Testing a cassette of outdated FUJI NPS 160 sent to me by a member of Pentax User Site -- NO DATE or how it was stored . I rated it 100 ASA and negs were a bit 'Dense' so this film could have been rated at 'Box Speed' . I CUT 15 frames ans show a few taken with my OLYMPUS OM-2n for a change.
On Enlargement I now notice there is a weird 'RETICULATION' effect.
Antique. adj.
2. Old fashioned or outdated
- Origin Latin antiquus 'former, ancient.'
Texture by PlayingWithBrushes: www.flickr.com/photos/playingwithpsp/
Linda Hartong Photography. ©All Rights Reserved. 2008 Do not use, copy or edit any of my photographs without written permission.
Autumn 2015
Konica FC-1
Konica Hexanon AR 50mm f/1.4
Outdated Kodak Color Plus 200
Boots scan + LR adjustments
This is in fact a burial mound, but not a particularly old one. I wouldn't mind being laid to rest somewhere like this, though.
Camera: Pentax 645N
Lens: smc Pentax-A 645 80-160mm F4.5
Exposure: 1/350 @ F11
Film: Provia 100F dated 2004
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on authentic facts. BEWARE!
Some background:
The Austrian Air Force in its current form was created in May 1955 by the victorious Allied powers, subject to restrictions on its use of guided missiles. The Austrian State Treaty of 1955 committed Austria to permanent neutrality. Pilot training started out with a four Yak-11 Moose and four Yak-18 Max aircraft donated by the Soviet Union, and Austria purchased further light trainer types under the Military Assistance Program. Until 1960 Austria purchased training and support aircraft under the MAP, but no modern fighter aircraft; the role of a fighter was rather inadequately filled by thirty already outdated Saab 29 Tunnan, bought second-hand from the Swedish Air Force in the early 1960s which equipped two fighter bomber squadrons.
To expand its capabilities and modernize the fleet, Austria purchased from 1970 on a total of 40 Saab 105 lightweight multi-role aircraft from Sweden with the intention to deploy them in trainer, reconnaissance, ground attack and even interception roles. As it became clear in the 1980s that the light sub-sonic aircraft were inadequate for air combat and airspace interdiction, Austria started looking for a more capable aircraft. In 1984, Austria had devised a two-phase solution to its problem: buying 30 interim aircrafts cheaply as a stopgap and then trading them back for a new generation aircraft in the early or mid-Nineties.
International response was quick and manifold: Bristol Aerospace offered initially ex RAF Jaguars to be replaced by Tornado F.3 or even Eurofighters; Saab-Scania offered between 24 and 30 former Royal Swedish Air Force J 35D Draken, followed by Saab J 39 Gripen as future substitutes; General-Electric suggested downgraded F-16/79 or F-16A for phase one and an option for the same aircraft in a more modern variant for phase two; Northrop’s numberF-5E was another alternative for phase one. Dassault was also present with refurbished Mirage III initially, followed by Mirage 2000.
Finding the most suitable option in this mass was not easy, and eventually a surprising deal materialized: In 1985 the contract for the sale of twenty-four Lightning F.56 fighters plus four T.55 trainers was signed by the SPÖ/FPÖ government under Fred Sinowatz. The background: Saudi Arabia had been operating thirty-four F.53 single-seaters and six T.55 trainers since 1967 and was about to retire its fleet, which was still in very good condition and with a reasonable number of flying hours left on many airframes. The aircraft would be refurbished directly at BAe in Great Britain with the option to switch to the Tornado ADV or its successor, the Eurofighter Typhoon, later.
The Lightning F.53 was an export version of the RAF’s F.6, but with a multi-role mission profile in mind that included, beyond the primary interceptor mission with guided missiles or internal guns, the capability to carry out interdiction/ground attacks and reconnaissance missions. To carry a suitable ordnance load, the F.53 featured additional underwing pylons for bombs or unguided rocket pods. Instead of the standard Firestreak/Red Top AAM missile station in the lower front fuselage, two retractable panniers with a total of forty-four unguided 50 mm rockets, which were effective against both ground and aerial targets, could be installed, or, alternatively, two camera packs (one with five cameras and another with a rotating camera mount) was available for tactical photo reconnaissance missions. Overwing hardpoints, adapted from the Lightning F.6, allowed to carry auxiliary fuel tanks to increase range/endurance, additional rocket pods or even retarded bombs.
The Lightning T.55 was also an export variant, a two-seat side-by-side training aircraft, and virtually identical to the T.5, which itself was based on the older F.3 fighter variant, and fully combat-capable.
The Saudi Arabian multi-role F.53s had served in the ground-attack and reconnaissance roles as well as an air defense fighter, with Lightnings of No. 6 Squadron RSAF carrying out ground-attack missions using rockets and bombs during a border dispute with South Yemen between December 1969 and May 1970. Saudi Arabia received Northrop F-5E fighters from 1971, which resulted in the Lightnings relinquishing the ground-attack mission, concentrating on air defense, and to a lesser extent, reconnaissance. Until 1982, Saudi Arabia's Lightnings were mainly operated by 2 and 6 Squadron RSAF (although a few were also used by 13 Squadron RSAF), but when 6 Squadron re-equipped with the F-15 Eagle from 1978 on, all the remaining aircraft were concentrated and operated by 2 Squadron at Tabuk. In 1985, as part of the agreement to sell the Panavia Tornado (both IDS and ADV versions) to the RSAF, the Lightnings were traded in to British Aerospace, returned to Warton for refurbishment and re-sold to Austria.
While the Saudi Arabian Lightnings’ hardware was in very good shape, the Austrian Bundesluftwaffe requested some modifications, including a different missile armament: instead of the maintenance-heavy British Firestreak/Red Top AAMs, the Lightnings were to be armed with simpler, lighter and more economical IR-guided AIM-9 Sidewinder AAMs which were already in the Austrian Air Force’s inventory. Two of these missiles were carried on single launch rails on the lower forward fuselage; an additional pair of Sidewinders could also be carried on the outer underwing stations, for a total of four. The F.53s’ optional retractable unguided rocket panniers were dropped altogether in favor of a permanent avionics bay for the Sidewinders in its place. However, to carry out tactical reconnaissance tasks (formerly executed by J 29Fs with a removable camera pod instead of the portside gun bay), four Austrian Lightnings frequently had one of the optional camera compartments installed, thereby losing the capability to deploy Sidewinders, though.
Among other things, the machines were furthermore upgraded with new bird strike-proof cockpit glazing, avionics were modernized, and several other minor customer requests were adopted, like a 0.6-megacandela night identification light. This spotlight is mounted in the former portside gun bay in front of the cockpit, and an anti-glare panel was added under the windscreen.
The fixed in-flight refueling probe was deleted, as this was not deemed necessary anymore since the Lightnings would exclusively operate within neutral Austria’s borders. The probes could, however, be re-installed, even though the Austrian pilots would not receive on-flight refueling training. The Lightnings' optional 260 imp gal overwing tanks were retained since they were considered to be sufficient for extended subsonic air patrols or eventual ferry flights.
The refurbished Lightnings were re-designated F.56 and delivered in batches of four between 1987 and 1989 to the Austrian Air Force’s 1st and then 2nd Fighter Squadrons, carrying a grey air superiority paint scheme. At that time, the airframes had between 1,550 and 2,800 flight hours and all had a general overhaul behind them. In 1991, the Lightings were joined by eighteen German ex-NVA-LSK MiG-23s, which were transferred to Austrian Air Force's ‘Fliegerwerft B’ at Nittner Air Base, where they'd be overhauled and updated with NATO-compatible equipment. As MiG-23Ö they were exclusively used as interceptors, too.
Shortly after their introduction, the Austrian Lightnings saw their first major use in airspace interdiction starting 1991 during the Yugoslav Wars, when Yugoslav MiG-21 fighters frequently crossed the Austrian border without permission. In one incident on 28 June a MiG-21 penetrated as far as Graz, causing widespread demands for action. Following repeated border crossings by armed aircraft of the Yugoslav People's Army, changes were suggested to the standing orders for aircraft armament.
With more and more practice and frequent interceptions one of the Lightning's basic flaws became apparent: its low range. Even though the Lightning had a phenomenal acceleration and rate of climb, this was only achieved in a relatively clean configuration - intercepting intruders was one thing but escorting them back to the Austrian border or an assigned airfield, as well as standing air patrols, were a different thing. With more tactical experience, the overwing tanks were taken back into service, even though they were so draggy that their range benefit was ultimately zero when the aircraft would use its afterburners during a typical interception mission. Therefore, the Austrian QRA Lightnings were typically operated in pairs: one clean and only lightly armed (typically with the guns and a pair of AIM-9s), to make a quick approach for visual intruder identification and contact, while a second aircraft with extra fuel would follow at high subsonic speed and eventually take over and escort the intruder. Airspace patrol was primarily executed with the MiG-23Ö, because it had a much better endurance, thanks to its VG wings, even though the Floggers had a poor service record, and their maintenance became ever more complicated.
After more experience, the Austrian Lightnings received in 1992 new ALR-45 radar detectors in a fairing on the fin top as well as chaff and flare dispenser systems, and the communication systems were upgraded, too. In 2004 the installation of Garmin 295 moving map navigation devices followed, even though this turned out to be a negligible update: on December 22, 2005, the active service life and thus military use of the Lightnings in general ended, and Austria was the last country to decommission the type, more than 50 years after the first flight of the prototype on August 4, 1954.
The Austrian Lightnings’ planned service period of 10 years was almost doubled, though, due to massive delays with the Eurofighter’s development: In 2002, Austria had already selected the Typhoon as its new “Phase II” air defense aircraft, having beaten the F-16 and the Saab Gripen in competition, and its introduction had been expected to occur from early 2005 on, so that the Lightnings could be gradually phased out. The purchase of 18 Typhoons was agreed on 1 July 2003, but it would take until 12 July 2007 that the first Typhoon would eventually be delivered to Zeltweg Air Base and formally enter service with the Austrian Air Force. This operational gap had to be bridged with twelve F-5E leased from Switzerland for EUR 75 mio., so that Quick Reaction Alert (QRA) duties for the Austrian airspace could be continued.
General characteristics:
Crew: 1
Length: 55 ft 3 in (16.84 m)
Wingspan: 34 ft 10 in (10.62 m)
Height: 19 ft 7 in (5.97 m)
Wing area: 474.5 sq ft (44.08 m²)
Empty weight: 31,068 lb (14,092 kg) with armament and no fuel
Gross weight: 41,076 lb (18,632 kg) with two AIM-9B, cannon, ammunition, and internal fuel
Max takeoff weight: 45,750 lb (20,752 kg)
Powerplant:
2× Rolls-Royce Avon 301R afterburning turbojet engines,
12,690 lbf (56.4 kN) thrust each dry, 16,360 lbf (72.8 kN) with afterburner
Performance:
Maximum speed: Mach 2.27 (1,500 mph+ at 40,000 ft)
Range: 738 nmi (849 mi, 1,367 km)
Combat range: 135 nmi (155 mi, 250 km) supersonic intercept radius
Range: 800 nmi (920 mi, 1,500 km) with internal fuel
1,100 nmi (1,300 mi; 2,000 km) with external overwing tanks
Service ceiling: 60,000 ft (18,000 m)
Zoom ceiling: 70,000 ft (21,000 m)
Rate of climb: 20,000 ft/min (100 m/s) sustained to 30,000 ft (9,100 m)
Zoom climb: 50,000 ft/min
Time to altitude: 2.8 min to 36,000 ft (11,000 m)
Wing loading: 76 lb/sq ft (370 kg/m²) with two AIM-9 and 1/2 fuel
Thrust/weight: 0.78 (1.03 empty)
Armament:
2× 30 mm (1.181 in) ADEN cannon with 120 RPG in the lower fuselage
2× forward fuselage hardpoints for a single AIM-9 Sidewinder AAM each
2× underwing hardpoints for 1.000 lb (454 kg) each
2× overwing pylon stations for 2.000 lb (907 kg each),
typically occupied with 260 imp gal (310 US gal; 1,200 l) ferry tanks
The kit and its assembly:
This was another submission to the “Hunter, Lightning and Canberra” group build at whatifmodellers.com in 2022 and intended as a rather simple build since it was based on an alternate reality plot: the weird story that Austria was offered a revamped fleet of ex-Saudi Arabian Lightnings is true(!), but the decision eventually fell in favor of revamped Saab J 35Ds from Sweden. For this what-if build I used the real historic timeline, replaced the aircraft, and built both story and model around this – and the result became the BAC Lightning F.56 in Austrian Air Force service.
Initially I wanted to use an Airfix BAC Lightning in The Stash™, a really nice model kit and a relatively new mold, but it turned out to be the kit’s F.2A variant. While very similar to the F.6, changing it into a F.53 analogue with the OOB parts turned out to be too complex for my taste. For instance, the F.2A kit lacks the ventral gun bay (it just comes with the auxiliary tank option since the guns are already located in front of the cockpit) and the cable conduits on the lower flanks. Procuring a suitable and priceworthy Airfix F.6 turned out to be impossible, but then I remembered a Hasegawa Lightning F.6 in The Stash™ that I had shot at ev!lbay many moons ago for a laughable price and without a concrete plan. However, this kit is pretty old: it has raised (yet quite fine, less robust than the Matchbox kit) panel lines and even comes with a pilot figure, but also many weak spots like the air intake and the jet exhausts that end in flat walls after some millimeters depth and a very basic cockpit. But for this rather simple what-if project the kit appeared to be a suitable basis, and it would eventually find a good use.
The Hasegawa Lightning was basically built OOB, even though I made some cosmetic amendments like a better seat for the pilot, hydraulic fluid lines on the landing gear made from wire or opening the flat walls inside of the air intake opening and the jet nozzles. Behind the radome, a simple splitter plate was added as well as a recessed bulkhead in front of an implanted Me 262 cockpit tub (the Hasegawa kit just offers a bare floor panel, nothing else!), the afterburners were extended inwards with parts from a Matchbox A.W. Meteor night fighter.
The Red Top AAMs and the in-flight refueling probe were omitted. Instead, I added extra F.53-style forward-swept pylons under the outer wings, scratched from 1.5 mm styrene sheet due to their odd, raked shape, and I added Sidewinder launch rails plus suitable missiles from a Hasegawa air-to-air weapons set to all four stations. After long consideration I also retained the ‘overburger’ tanks, partly because of the unique layout on the Lightning, and also because of operational considerations.
Chaff dispensers were scratched from styrene profiles and placed at the fin’s base. A fairing for the retrofitted radar warning sensor was added to the fin tip, created from 1.5 mm styrene sheet.
Painting and markings:
To reflect the “alternate reality” role of the Lightning I gave the model a livery similar to the Saab J 35Ö that were actually procured: an adaptation of the USAF “Egypt One” scheme, carried primarily by the USAF F-16s. Adapting this simple three-tone camouflage from the flat F-16 to the Draken was easy and straightforward, but applying it to a Lightning with its many vertical surfaces turned out to be a tough challenge. I eventually came up with a paint scheme that reminds of the late RAF low-viz Lightning liveries, which existed in a wide range of patterns and graduations of grey.
The colors were authentic, FS 36118, 36270 and 36375 (using Humbrol 125, 126 and 127), and I decided to emphasize the camouflage of the flanks against the horizon, so that the vertical surfaces and the fin became FS 36270. The undersides of wings, stabilizers and fuselage became FS 36375. The dark FS 36118 was only applied to the upper sides of the wings and the stabilizer, and to a high dorsal section, starting at the wing roots. As a small contrast, the tank area on the spine was painted in light grey, simulating unpainted fiber glass. The radome was painted with a streaky mix of Humbrol 155 and 56.
As usual, the model received a light black ink washing, some post-panel-shading in lighter tones, and, due to the raised panel lines, was very lightly rubbed with graphite. The cockpit interior was painted in medium grey (Revell 47) with an olive drab fabric fairing behind the black pilot seat, which received ejection handles made from thin wire as eye candy. The landing gear and the respective wells were painted in Humbrol 56 (Aluminum Dope).
The decals are a wild mix: The fuselage roundels are actually wing markings from a Hasegawa J 35OE, as well as the huge orange "06" on the wings (I could not resist; they will later be partly obscured by the overwing tanks, but the heck with it!). The roundels on the wings come from a generic TL Modellbau sheet - I found that I needed larger markings than those on the Draken.
Both unit and individual aircraft identifiers are single black DIN font digits, also from TL Modellbau. The unit badges on the fin are authentic, even though from an earlier era: they came from an Austrian J 29 of Fliegerregiment 2 from a PrintScale sheet, and all stencils were taken from the OOB low-viz RAF markings sheet, plus four small warning triangles for the underwing pylons.
A ‘what-if’ model in the purest sense, since this model depicts what could really have been: ex Saudi-Arabian export BAC Lightnings over the Austrian Alps! However, refurbished Saab J 35D Draken made the race (and later followed by the Eurofighter Typhoon at ‘Stage 2’), so that this Lightning remains fictional. It does not look bad in the ‘Egypt One’ paint scheme, though, better than expected!
Outdated 2004 FUJI PROVIA 100F with the SMC Macro-Takumar 135mm f4.5 lens My Wife's GNOME never complains and poses for me for Tests !
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on authentic facts. BEWARE!
Some background:
The Austrian Air Force in its current form was created in May 1955 by the victorious Allied powers, subject to restrictions on its use of guided missiles. The Austrian State Treaty of 1955 committed Austria to permanent neutrality. Pilot training started out with a four Yak-11 Moose and four Yak-18 Max aircraft donated by the Soviet Union, and Austria purchased further light trainer types under the Military Assistance Program. Until 1960 Austria purchased training and support aircraft under the MAP, but no modern fighter aircraft; the role of a fighter was rather inadequately filled by thirty already outdated Saab 29 Tunnan, bought second-hand from the Swedish Air Force in the early 1960s which equipped two fighter bomber squadrons.
To expand its capabilities and modernize the fleet, Austria purchased from 1970 on a total of 40 Saab 105 lightweight multi-role aircraft from Sweden with the intention to deploy them in trainer, reconnaissance, ground attack and even interception roles. As it became clear in the 1980s that the light sub-sonic aircraft were inadequate for air combat and airspace interdiction, Austria started looking for a more capable aircraft. In 1984, Austria had devised a two-phase solution to its problem: buying 30 interim aircrafts cheaply as a stopgap and then trading them back for a new generation aircraft in the early or mid-Nineties.
International response was quick and manifold: Bristol Aerospace offered initially ex RAF Jaguars to be replaced by Tornado F.3 or even Eurofighters; Saab-Scania offered between 24 and 30 former Royal Swedish Air Force J 35D Draken, followed by Saab J 39 Gripen as future substitutes; General-Electric suggested downgraded F-16/79 or F-16A for phase one and an option for the same aircraft in a more modern variant for phase two; Northrop’s numberF-5E was another alternative for phase one. Dassault was also present with refurbished Mirage III initially, followed by Mirage 2000.
Finding the most suitable option in this mass was not easy, and eventually a surprising deal materialized: In 1985 the contract for the sale of twenty-four Lightning F.56 fighters plus four T.55 trainers was signed by the SPÖ/FPÖ government under Fred Sinowatz. The background: Saudi Arabia had been operating thirty-four F.53 single-seaters and six T.55 trainers since 1967 and was about to retire its fleet, which was still in very good condition and with a reasonable number of flying hours left on many airframes. The aircraft would be refurbished directly at BAe in Great Britain with the option to switch to the Tornado ADV or its successor, the Eurofighter Typhoon, later.
The Lightning F.53 was an export version of the RAF’s F.6, but with a multi-role mission profile in mind that included, beyond the primary interceptor mission with guided missiles or internal guns, the capability to carry out interdiction/ground attacks and reconnaissance missions. To carry a suitable ordnance load, the F.53 featured additional underwing pylons for bombs or unguided rocket pods. Instead of the standard Firestreak/Red Top AAM missile station in the lower front fuselage, two retractable panniers with a total of forty-four unguided 50 mm rockets, which were effective against both ground and aerial targets, could be installed, or, alternatively, two camera packs (one with five cameras and another with a rotating camera mount) was available for tactical photo reconnaissance missions. Overwing hardpoints, adapted from the Lightning F.6, allowed to carry auxiliary fuel tanks to increase range/endurance, additional rocket pods or even retarded bombs.
The Lightning T.55 was also an export variant, a two-seat side-by-side training aircraft, and virtually identical to the T.5, which itself was based on the older F.3 fighter variant, and fully combat-capable.
The Saudi Arabian multi-role F.53s had served in the ground-attack and reconnaissance roles as well as an air defense fighter, with Lightnings of No. 6 Squadron RSAF carrying out ground-attack missions using rockets and bombs during a border dispute with South Yemen between December 1969 and May 1970. Saudi Arabia received Northrop F-5E fighters from 1971, which resulted in the Lightnings relinquishing the ground-attack mission, concentrating on air defense, and to a lesser extent, reconnaissance. Until 1982, Saudi Arabia's Lightnings were mainly operated by 2 and 6 Squadron RSAF (although a few were also used by 13 Squadron RSAF), but when 6 Squadron re-equipped with the F-15 Eagle from 1978 on, all the remaining aircraft were concentrated and operated by 2 Squadron at Tabuk. In 1985, as part of the agreement to sell the Panavia Tornado (both IDS and ADV versions) to the RSAF, the Lightnings were traded in to British Aerospace, returned to Warton for refurbishment and re-sold to Austria.
While the Saudi Arabian Lightnings’ hardware was in very good shape, the Austrian Bundesluftwaffe requested some modifications, including a different missile armament: instead of the maintenance-heavy British Firestreak/Red Top AAMs, the Lightnings were to be armed with simpler, lighter and more economical IR-guided AIM-9 Sidewinder AAMs which were already in the Austrian Air Force’s inventory. Two of these missiles were carried on single launch rails on the lower forward fuselage; an additional pair of Sidewinders could also be carried on the outer underwing stations, for a total of four. The F.53s’ optional retractable unguided rocket panniers were dropped altogether in favor of a permanent avionics bay for the Sidewinders in its place. However, to carry out tactical reconnaissance tasks (formerly executed by J 29Fs with a removable camera pod instead of the portside gun bay), four Austrian Lightnings frequently had one of the optional camera compartments installed, thereby losing the capability to deploy Sidewinders, though.
Among other things, the machines were furthermore upgraded with new bird strike-proof cockpit glazing, avionics were modernized, and several other minor customer requests were adopted, like a 0.6-megacandela night identification light. This spotlight is mounted in the former portside gun bay in front of the cockpit, and an anti-glare panel was added under the windscreen.
The fixed in-flight refueling probe was deleted, as this was not deemed necessary anymore since the Lightnings would exclusively operate within neutral Austria’s borders. The probes could, however, be re-installed, even though the Austrian pilots would not receive on-flight refueling training. The Lightnings' optional 260 imp gal overwing tanks were retained since they were considered to be sufficient for extended subsonic air patrols or eventual ferry flights.
The refurbished Lightnings were re-designated F.56 and delivered in batches of four between 1987 and 1989 to the Austrian Air Force’s 1st and then 2nd Fighter Squadrons, carrying a grey air superiority paint scheme. At that time, the airframes had between 1,550 and 2,800 flight hours and all had a general overhaul behind them. In 1991, the Lightings were joined by eighteen German ex-NVA-LSK MiG-23s, which were transferred to Austrian Air Force's ‘Fliegerwerft B’ at Nittner Air Base, where they'd be overhauled and updated with NATO-compatible equipment. As MiG-23Ö they were exclusively used as interceptors, too.
Shortly after their introduction, the Austrian Lightnings saw their first major use in airspace interdiction starting 1991 during the Yugoslav Wars, when Yugoslav MiG-21 fighters frequently crossed the Austrian border without permission. In one incident on 28 June a MiG-21 penetrated as far as Graz, causing widespread demands for action. Following repeated border crossings by armed aircraft of the Yugoslav People's Army, changes were suggested to the standing orders for aircraft armament.
With more and more practice and frequent interceptions one of the Lightning's basic flaws became apparent: its low range. Even though the Lightning had a phenomenal acceleration and rate of climb, this was only achieved in a relatively clean configuration - intercepting intruders was one thing but escorting them back to the Austrian border or an assigned airfield, as well as standing air patrols, were a different thing. With more tactical experience, the overwing tanks were taken back into service, even though they were so draggy that their range benefit was ultimately zero when the aircraft would use its afterburners during a typical interception mission. Therefore, the Austrian QRA Lightnings were typically operated in pairs: one clean and only lightly armed (typically with the guns and a pair of AIM-9s), to make a quick approach for visual intruder identification and contact, while a second aircraft with extra fuel would follow at high subsonic speed and eventually take over and escort the intruder. Airspace patrol was primarily executed with the MiG-23Ö, because it had a much better endurance, thanks to its VG wings, even though the Floggers had a poor service record, and their maintenance became ever more complicated.
After more experience, the Austrian Lightnings received in 1992 new ALR-45 radar detectors in a fairing on the fin top as well as chaff and flare dispenser systems, and the communication systems were upgraded, too. In 2004 the installation of Garmin 295 moving map navigation devices followed, even though this turned out to be a negligible update: on December 22, 2005, the active service life and thus military use of the Lightnings in general ended, and Austria was the last country to decommission the type, more than 50 years after the first flight of the prototype on August 4, 1954.
The Austrian Lightnings’ planned service period of 10 years was almost doubled, though, due to massive delays with the Eurofighter’s development: In 2002, Austria had already selected the Typhoon as its new “Phase II” air defense aircraft, having beaten the F-16 and the Saab Gripen in competition, and its introduction had been expected to occur from early 2005 on, so that the Lightnings could be gradually phased out. The purchase of 18 Typhoons was agreed on 1 July 2003, but it would take until 12 July 2007 that the first Typhoon would eventually be delivered to Zeltweg Air Base and formally enter service with the Austrian Air Force. This operational gap had to be bridged with twelve F-5E leased from Switzerland for EUR 75 mio., so that Quick Reaction Alert (QRA) duties for the Austrian airspace could be continued.
General characteristics:
Crew: 1
Length: 55 ft 3 in (16.84 m)
Wingspan: 34 ft 10 in (10.62 m)
Height: 19 ft 7 in (5.97 m)
Wing area: 474.5 sq ft (44.08 m²)
Empty weight: 31,068 lb (14,092 kg) with armament and no fuel
Gross weight: 41,076 lb (18,632 kg) with two AIM-9B, cannon, ammunition, and internal fuel
Max takeoff weight: 45,750 lb (20,752 kg)
Powerplant:
2× Rolls-Royce Avon 301R afterburning turbojet engines,
12,690 lbf (56.4 kN) thrust each dry, 16,360 lbf (72.8 kN) with afterburner
Performance:
Maximum speed: Mach 2.27 (1,500 mph+ at 40,000 ft)
Range: 738 nmi (849 mi, 1,367 km)
Combat range: 135 nmi (155 mi, 250 km) supersonic intercept radius
Range: 800 nmi (920 mi, 1,500 km) with internal fuel
1,100 nmi (1,300 mi; 2,000 km) with external overwing tanks
Service ceiling: 60,000 ft (18,000 m)
Zoom ceiling: 70,000 ft (21,000 m)
Rate of climb: 20,000 ft/min (100 m/s) sustained to 30,000 ft (9,100 m)
Zoom climb: 50,000 ft/min
Time to altitude: 2.8 min to 36,000 ft (11,000 m)
Wing loading: 76 lb/sq ft (370 kg/m²) with two AIM-9 and 1/2 fuel
Thrust/weight: 0.78 (1.03 empty)
Armament:
2× 30 mm (1.181 in) ADEN cannon with 120 RPG in the lower fuselage
2× forward fuselage hardpoints for a single AIM-9 Sidewinder AAM each
2× underwing hardpoints for 1.000 lb (454 kg) each
2× overwing pylon stations for 2.000 lb (907 kg each),
typically occupied with 260 imp gal (310 US gal; 1,200 l) ferry tanks
The kit and its assembly:
This was another submission to the “Hunter, Lightning and Canberra” group build at whatifmodellers.com in 2022 and intended as a rather simple build since it was based on an alternate reality plot: the weird story that Austria was offered a revamped fleet of ex-Saudi Arabian Lightnings is true(!), but the decision eventually fell in favor of revamped Saab J 35Ds from Sweden. For this what-if build I used the real historic timeline, replaced the aircraft, and built both story and model around this – and the result became the BAC Lightning F.56 in Austrian Air Force service.
Initially I wanted to use an Airfix BAC Lightning in The Stash™, a really nice model kit and a relatively new mold, but it turned out to be the kit’s F.2A variant. While very similar to the F.6, changing it into a F.53 analogue with the OOB parts turned out to be too complex for my taste. For instance, the F.2A kit lacks the ventral gun bay (it just comes with the auxiliary tank option since the guns are already located in front of the cockpit) and the cable conduits on the lower flanks. Procuring a suitable and priceworthy Airfix F.6 turned out to be impossible, but then I remembered a Hasegawa Lightning F.6 in The Stash™ that I had shot at ev!lbay many moons ago for a laughable price and without a concrete plan. However, this kit is pretty old: it has raised (yet quite fine, less robust than the Matchbox kit) panel lines and even comes with a pilot figure, but also many weak spots like the air intake and the jet exhausts that end in flat walls after some millimeters depth and a very basic cockpit. But for this rather simple what-if project the kit appeared to be a suitable basis, and it would eventually find a good use.
The Hasegawa Lightning was basically built OOB, even though I made some cosmetic amendments like a better seat for the pilot, hydraulic fluid lines on the landing gear made from wire or opening the flat walls inside of the air intake opening and the jet nozzles. Behind the radome, a simple splitter plate was added as well as a recessed bulkhead in front of an implanted Me 262 cockpit tub (the Hasegawa kit just offers a bare floor panel, nothing else!), the afterburners were extended inwards with parts from a Matchbox A.W. Meteor night fighter.
The Red Top AAMs and the in-flight refueling probe were omitted. Instead, I added extra F.53-style forward-swept pylons under the outer wings, scratched from 1.5 mm styrene sheet due to their odd, raked shape, and I added Sidewinder launch rails plus suitable missiles from a Hasegawa air-to-air weapons set to all four stations. After long consideration I also retained the ‘overburger’ tanks, partly because of the unique layout on the Lightning, and also because of operational considerations.
Chaff dispensers were scratched from styrene profiles and placed at the fin’s base. A fairing for the retrofitted radar warning sensor was added to the fin tip, created from 1.5 mm styrene sheet.
Painting and markings:
To reflect the “alternate reality” role of the Lightning I gave the model a livery similar to the Saab J 35Ö that were actually procured: an adaptation of the USAF “Egypt One” scheme, carried primarily by the USAF F-16s. Adapting this simple three-tone camouflage from the flat F-16 to the Draken was easy and straightforward, but applying it to a Lightning with its many vertical surfaces turned out to be a tough challenge. I eventually came up with a paint scheme that reminds of the late RAF low-viz Lightning liveries, which existed in a wide range of patterns and graduations of grey.
The colors were authentic, FS 36118, 36270 and 36375 (using Humbrol 125, 126 and 127), and I decided to emphasize the camouflage of the flanks against the horizon, so that the vertical surfaces and the fin became FS 36270. The undersides of wings, stabilizers and fuselage became FS 36375. The dark FS 36118 was only applied to the upper sides of the wings and the stabilizer, and to a high dorsal section, starting at the wing roots. As a small contrast, the tank area on the spine was painted in light grey, simulating unpainted fiber glass. The radome was painted with a streaky mix of Humbrol 155 and 56.
As usual, the model received a light black ink washing, some post-panel-shading in lighter tones, and, due to the raised panel lines, was very lightly rubbed with graphite. The cockpit interior was painted in medium grey (Revell 47) with an olive drab fabric fairing behind the black pilot seat, which received ejection handles made from thin wire as eye candy. The landing gear and the respective wells were painted in Humbrol 56 (Aluminum Dope).
The decals are a wild mix: The fuselage roundels are actually wing markings from a Hasegawa J 35OE, as well as the huge orange "06" on the wings (I could not resist; they will later be partly obscured by the overwing tanks, but the heck with it!). The roundels on the wings come from a generic TL Modellbau sheet - I found that I needed larger markings than those on the Draken.
Both unit and individual aircraft identifiers are single black DIN font digits, also from TL Modellbau. The unit badges on the fin are authentic, even though from an earlier era: they came from an Austrian J 29 of Fliegerregiment 2 from a PrintScale sheet, and all stencils were taken from the OOB low-viz RAF markings sheet, plus four small warning triangles for the underwing pylons.
A ‘what-if’ model in the purest sense, since this model depicts what could really have been: ex Saudi-Arabian export BAC Lightnings over the Austrian Alps! However, refurbished Saab J 35D Draken made the race (and later followed by the Eurofighter Typhoon at ‘Stage 2’), so that this Lightning remains fictional. It does not look bad in the ‘Egypt One’ paint scheme, though, better than expected!
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
When, towards late 1945, the Einheits-Chassis for the German combat tanks (the "E" series of medium and heavy tanks) reached the front lines, several heavily armed anti-aircraft turrets had been developed, including the 30mm Kugelblitz, based on the outdated Panzer IV, the "Coelian" turret with various armament options for the Panzer V Panther hull, and there were twin 55 mm as well as single and even 88mm cannon systems for the new E-50, E-75 and E-100 chassis'.
With these new weapons for medium- and high-altitude targets, Firepower was considerably increased, but the tank crews still had to rely on traditional visual tracking and aiming of targets. One potential solution in which the German Heeresleitung was highly interested from the start was the use of the Luftwaffe’s new radar technology for early target identification and as an aiming aid in poor weather conditions or even at night. The German Luftwaffe first introduced an airborne interception radar in 1942, but these systems were bulky and relied upon large bipolar antenna arrays. These were not suitable for any use in a ground vehicle, lest to say in a tank that would also carry weapons and ammunition.
A potential solution appeared in late 1944 with the development of the FuG 240 "Berlin". It was an airborne interception radar, too, but it was the first German radar to be based on the cavity magnetron, which eliminated the need for the large multiple dipole-based antenna arrays seen on earlier radars, thereby greatly increasing the performance of the night fighters. The FuG 240 with a rotating dish antenna was introduced by Telefunken in April 1945, primarily in Junkers Ju 88G-6 night-fighters, behind a plywood radome which considerably improved aerodynamics. This so greatly reduced drag compared to the late-model Lichtenstein and Neptun systems that the fighters regained their pre-radar speeds and made them competitive again. The FuG 240 was effective against bomber-sized targets at distances of up to 9 kilometers (5.5 mi), or down to 0.5 kilometer, which eliminated the need for a second, short-range radar system.
Right before the FuG 240's roll-out with the Luftwaffe, the Heer insisted on a ground-based derivative for its anti-aircraft units. Political pressure from Berlin convinced the RLM to share the new technology, and Telefunken was ushered to adapt the radar system to an armored ground vehicle in February 1945.
It soon became clear that the FuG 240 had several drawbacks for this task. On one side, ground clutter and the natural horizon limited the system's range and low-level effectiveness, but its 9 km range in free space made high altitude surveillance possible – just enough for the effective interception of Allied bombers that attacked important point targets. Furthermore, the whole system, together with its power supply and a dirigible dish antenna, took up a lot of space, so that its integration into a tank-based anti-aircraft vehicle like an SPAAG as an autonomous, stand-alone solution was ruled out.
A workable solution eventually came as a technical and tactical compromise: the army’s anti-aircraft tanks were to be grouped together in so-called Panzer-Fla-Züge, which consisted of several (typically four) SPAAGs and an additional, dedicated radar surveillance and command unit, so that the radar could guide the tank crews towards incoming targets – even though the gun crews still had to rely on visual targeting.
Two respective guidance vehicles developed, a light and a heavy one. The light one, intended against low-flying targets like the Ilyushin Il-2 on the Eastern front, became the 8x8 Funkmess-/Flak-Kommandowagen Sd.Kfz. 234/6. The heavy variant, with a bigger antenna and a more powerful emitter, became the Mittlerer Funkmess-/Flak-Kommandopanzer Sd.Kfz. 282. In contrast to the light and compact Sd.Kfz. 234/6, the Sd.Kfz. 282’s complete radar and observation system was installed in a new turret, so that it could be simply mounted onto the new E-50 Einheitspanzer battle tank hull.
This new, box-shaped turret had been developed by Rheinmetall, together with Telefunken, and was based on the turret design for the new 55 mm twin anti-aircraft cannon. It had a maximum armor of 60mm at the front and held all of the radar equipment, christened "Basilisk", after the monster from medieval mythology with a petrifying sight. The turret held a crew of three: a commander, a radar operator, and an observer for the optical rangefinder. The rest of the crew, the driver and a radio operator, sat in the hull. No armament was fitted, even though a light machine gun could be mounted on the roof for self-defense, even though it could not be operated from the inside. A heavier armament was not deemed necessary since the vehicle would stay close to the heavily armed tanks/SPAAGs it would typically accompany.
The Basilisk radar’s rotating dish antenna had a diameter of 90 cm (35 ½ inches) and was installed at the turret's front under a hard vinyl cover. Power of the modified FuG 240 was 25kW, with a search angle of +80/− 5° and a frequency range: 3,250–3,330MHz (~10 cm). Range was, due the bigger antenna and a higher emitter output, increased to 0.5–11.0 kilometer, even though only under ideal conditions. Power came from a dedicated generator that was connected to the E-50’s V-12 Maybach HL 234 gasoline engine.
Beyond the radar system, the vehicle was furthermore equipped with a powerful visual coincidence range finder in the turret, combined with an analogue computer, the Kommandogerät (KDO) 40 Telemeter. This system had been introduced in 1941 as a guidance tool for stationary anti-aircraft units equipped with the 88 mm and the 105 mm Flak, but it had so far – due to its size and bulk – only been deployed on an unarmored trailer
The KDO 40 and similar sights worked as follows: Light from the target entered the range finder through two windows located at either end of the instrument. At either side, the incident beam was reflected to the center of the optical bar by a pentaprism, and this optical bar was ideally made from a material with a low coefficient of thermal expansion so that optical path lengths would not change significantly with temperature. The reflected beam first passed through an objective lens and was then merged with the beam of the opposing side with an ocular prism sub-assembly to form two images of the target which were viewed by the observer through the eyepiece. Since either beam entered the instrument at a slightly different angle the resulting image, if unaltered, would appear blurry. Therefore, in one arm of the instrument, a compensator was integrated which could be adjusted by the operator to tilt the beam until the two images matched. At this point, the images were said to be in coincidence. The degree of rotation of the compensator determined the range to the target by simple triangulation, allowing the calculation of the distance to the observed object.
Fixed target reading with the device mounted in the Sd.Kfz. 282 turret was possible on targets from 3,000 to 20,000 m. Aerial courses could be recorded at all levels of flight and at a slant range between 4,000 and 18,000 m - enough for visual identification beyond an anti-aircraft group's effective gun ranges and perfectly suitable for long range observation, so that the Sd.Kfz. 282 also had excellent reconnaissance and observation capabilities. The rangefinder’s optical bar had a massive span of 400 cm (157.5 in) and went right through the turret, just above the radar device installation. The whole device, together with its armored fairing, was 4,60 m (15 ft 1 in) wide, so that it protruded from the turret on both sides over the lower hull. The odd and unwieldy installation quickly earned the vehicle nicknames like "Hirsch (stag)", "Zwo-Ender" (a young stag with just two antlers) or “Ameise” (ant). None of these were official, though. In order to protect the Telemeter on the way, the turret was normally turned by 90° and hidden under a tarpaulin, in order not to give away any details of the highly classified equipment.
However, development of the Einheitspanzer family lagged behind schedule, and in early 1945 no E-50 chassis was available for the highly specialized Sd.Kfz. 282 – battle tanks and SPGs were in higher demand. As an alternative, the turret was quickly adapted for different tank hulls, namely the Sd.Kfz. 171, the Panzer V ‘Panther’ medium tank and the heavy Sd.Kfz. 181 ‘Tiger I’. Tests with both hulls in spring 1945 were successful, but only the lighter ‘Panther’ hull was chosen because it was lighter overall, more mobile and available in sufficient numbers for a quick roll-out. In this configuration, the system received the designation Sd.Kfz. 282/1, while the original Sd.Kfz. 282 designation was reserved for the originally planned E-50 chassis variant.
The first vehicles reached, together with the new FlaK tanks, the front units in September 1945. Operating independently, they were primarily allocated to the defense of important production sites and the city of Berlin, and they supported tank divisions through early warning duties and visual long-range reconnaissance. Operationally, the Sd.Kfz. 282’s sensor setup with its combined visual and radar input turned out to be surprisingly successful. The combination of the Basilisk radar with the KDO 40 rangefinder allowed a time from initial target acquisition to the first AA shot of less than 20 seconds, which was impressive for the time – typically, simple visual target acquisition took 30 seconds or more. First shot hit probability was appreciably improved, too, and even quick passes of aircraft at low altitudes could be precalculated, if the radar was not obstructed.
However, the radar remained capricious, its performance rather limited and the unarmored antenna fairing at the turret’s front was easily damaged in combat, even by heavy machinegun fire. But the Sd.Kfz. 282 offered, when the vehicle was placed in a location with a relatively free field of view (e. g. on a wide forest clearance or in an open field), a sufficient early warning performance against incoming bombers at medium to high altitudes, and it also appreciably mobilized the bulky but valuable KDO 40 device. It now could easily be moved around and keep up with the pace of motorized battle groups that the Panzer-Fla-Züge units were supposed to protect.
Until the end of hostilities, probably thirty Sd.Kfz. 282/1s were completed from newly built (Ausf. F, recognizable through the simpler all-metal wheels) or from refurbished earlier Panzer V chassis of various types before production switched in early 1946 to the E-50 chassis which had eventually become available in sufficient numbers.
Specifications:
Crew: Five (commander, radar operator, observer, driver, radio-operator/hull machine gunner)
Weight: 41.2 tonnes (40.4 long tons; 45.3 short tons)
Length (hull only): 6.87 m (22 ft 6 in)
Width: 3.42 m (11 ft 3 in) hull only
4,60 m (15 ft 1 in) overall
Height: 2.95 m (9 ft 8 in)
Suspension: Double torsion bar, interleaved road wheels
Fuel capacity: 720 litres (160 imp gal; 190 US gal)
Armor:
15–80 mm (0.6 – 3.15 in)
Performance:
Maximum road speed: 48 km/h (30 mph)
Operational range: 250 km (160 mi)
Power/weight: 15.39 PS (11.5 kW)/tonne (13.77 hp/ton)
Engine:
Maybach HL230 P30 V-12 petrol engine with 700 PS (690 hp, 515 kW)
ZF AK 7-200 gear; 7 forward 1 reverse
Armament:
1× 7.92 mm MG 34 machine gun in the front glacis plate with 2.500 rounds
Optional MG 34 or 42 machine gun with 1.500 rounds on the turret
The kit and its assembly:
Another submission to the “Recce & Surveillance” group build at whatifmodellers.com in July 2021, and actually a good occasion to tackle a project that I had on my list for some years. A long while ago I bought a resin conversion set with a (purely fictional) Heer ‘46 anti-aircraft surveillance radar system, based on an E-50 chassis. Unfortunately, I cannot identify the manufacturer, but this 1:72 conversion set was/is nicely molded, with delicate details, no bubbles or flash and it even came with a commander figure for an optional open hatch on top as well as a pair of delicate brass antennae.
Even though I could have mounted this replacement turret onto a Trumpeter or Modelcollect E-50/75 chassis, I rather decided to create an earlier (1945 time frame) interim vehicle on a late Panzer V ‘Panther’ basis, mostly because it would be more compact and I doubt that brand new E-50/75s would have been “wasted” on second line/support vehicles like this mobile surveillance/commando post for anti-aircraft units?
The Panther chassis is the old Hasegawa kit for an Ausf. G tank from 1973, chosen because of its good fit, simplicity and the vinyl tracks, which I prefer. However, the kit clearly shows its age and some weak/soft details (e. g. the gratings on the engine deck), but it was enough for my plans and easy to handle.
Both turret and hull were built separately and basically OOB, combined with an adjusted turret ring. The Kdo 40’s “antlers” are to be glued directly to the turret’s flanks, but I reinforced the connections with wire. I also replaced the set’s brass antennae with heated sprue material and used a surplus PE detail set from a Modelcollect E-50/75 to hide the crude engine openings and change the overall look of the Panther a little. Some storage boxes as well as spare track links were added to the flanks, stuff collected from the scrap box.
To emphasize the refurbished character of the vehicle I left away the Panther’s side skirts – these were easily lost in battle, anyway, and probably have rather been allocated to battle tanks than to 2nd line support vehicles, despite leaving the Panther’s lower hull under the mudguards vulnerable.
Painting and markings:
Even though the paint scheme on this model is based on German standard colors, it is a little special. Late in real-world WWII some Panzer Vs received a unique, uniform RAL 6003 (Olivgrün) factory finish instead of the usual all-over RAL 7028 (Dunkelgelb) or the bare oxide red primer finish, onto which the frontline units would add individual camouflage, depending on the theatre of operations and whatever paint or application tool was at hand. This special green livery was adopted for the model, including the new turret. The individual camouflage consists of diagonal stripes in Dunkelgelb and Rotbraun (RAL 8017), added on top of the green basis with rather sharp and straight edges and only to the vertical surfaces. The practice to leave out the horizontal surfaces was called “Sparanstrich” (literally “economy paintwork”), an attempt to save the more and more scarce paint.
This rather odd style was actually applied to several late war Panther tanks – even though I am personally not certain about this pattern’s effectiveness? Maybe a kind of dazzle effect was sought for?
The basic green became a modern-day RAL 6003 from the rattle can (which is very close to FS 34102, just a tad lighter), applied in a rather cloudy fashion on top of an initial coat of Oxide Red primer (RAL 3009) overall, also from the rattle can. On top of that the stripes were painted with a brush, partly masked but mostly free-handedly. For some variation I used this time Tamiya XF-60 (a rather pale interpretation of Dunkelgelb which IMHO lacks a greenish hue and rather looks like a desert sand tone) and XF-64 (a rich whole milk chocolate tone) to create the additional camouflage, not fully opaque so that the impression of thinly/hastily applied paint was reinforced.
Once dry, the whole surface received a very dark brown washing with thinned acrylic paint and surface details were emphasized through dry-brushing with earth brown and beige.
For a different look (and to break up the tank’s bulky outlines) I applied camouflage nets to the model, realized with gauze bandages drenched in Tamyia XF-62 (Olive Drab) and mounted into place around the turret and at the front of the hull while still slightly wet.
Decals were puzzled together from various German tank sheets. The kit was sealed with matt acrylic varnish, what also fixed the cammo nets in place. The originally shiny black vinyl tracks were also painted/weathered, with a wet-in-wet mix of grey, iron, black and red brown (all acrylics). Once mounted into place, mud and dust were simulated around the running gear and the lower hull with a greyish-brown mix of artist mineral pigments.
Not a spectacular build, but I am happy that I eventually had the opportunity and motivation to tackle this project that had been lingering for years in the The Stash™. The result looks really good – the anonymous resin set is/was excellent, and combined with the Panther hull, the whole thing looks very credible. I am only a bit sad that the odd, almost artistic camouflage got a little lost under the cammo nets and the equipment on the hull, and the dust/dirt on the lower areas blurs the three basic colors even more. Well, you cannot have everything at once, and I might re-use this scheme on a “cleaner” future build.
+++ DISCLAIMER +++
Nothing you see here is real, even though the model, the conversion or the presented background story might be based historical facts. BEWARE!
Some background:
The Georgian Air Force and Air Defense Division (თავდაცვის ძალების ავიაციისა და საჰაერო თავდაცვის სარდლობა; tavdatsvis dzalebis aviatsiisa da sahaero tavdatsvis sardloba) was established on January 1, 1992, and in September the Georgian Air Force conducted its first combat flight during the separatist war in Abkhazia. On August 18, 1998, the two divisions were unified in a joint command structure and renamed the Georgian Air Force.
In 2010, the Georgian Air Force was abolished as a separate branch and incorporated into the Georgian Land Forces as Air and Air Defense sections. By that time, the equipment – primarily consisting of Eastern Bloc aircraft inherited from the Soviet Union after the country’s dissolution – was totally outdated, the most potent aircraft were a dozen Suchoj Su-25 attack aircraft and a handful of MiG-21U trainers.
In order to rejuvenate the air arm, Tbilisi Aircraft Manufacturing (TAM), also known as JSC Tbilaviamsheni and formerly known as 31st aviation factory, started a modernization program for the Su-25, for the domestic forces but also for export customers. TAM had a long tradition of aircraft production within the Soviet Union. In the 1950s the factory started the production of Mikoyan's MiG-15 and later, the MiG-17 fighter aircraft. In 1957 Tbilisi Aircraft State Association built the MiG-21 two-seater fighter-trainer aircraft and its various derivative aircraft, continuing the MiG-21 production for about 25 years. At the same time the company was manufacturing the K-10 air-to-surface guided missile. Furthermore, the first Sukhoi Su-25 (known in the West as the "Frogfoot") close support aircraft took its maiden voyage from the runway of 31st aviation factory. Since then, more than 800 SU-25s had been delivered to customers worldwide. From the first SU-25 to the 1990s, JSC Tbilaviamsheni was the only manufacturer of this aircraft, and even after the fall of the Soviet Union the production lines were still intact and spares for more than fifty complete aircraft available. Along with the SU-25 aircraft 31st aviation factory also launched large-scale production of air-to-air R-60 and R-73 IR guided missiles, a production effort that built over 6,000 missiles a year and that lasted until the early 1990s. From 1996 to 1998 the factory also produced Su-25U two-seaters.
In 2001 the factory started, in partnership with Elbit Systems of Israel, upgrading basic Su-25 airframes to the Su-25KM “Scorpion” variant. This was just a technical update, however, intended for former Su-25 export customers who would upgrade their less potent Su-25K export aircraft with modern avionics. The prototype aircraft made its maiden flight on 18 April 2001 at Tbilisi in full Georgian Air Force markings. The aircraft used a standard Su-25 airframe, enhanced with advanced avionics including a glass cockpit, digital map generator, helmet-mounted display, computerized weapons system, complete mission pre-plan capability, and fully redundant backup modes. Performance enhancements included a highly accurate navigation system, pinpoint weapon delivery systems, all-weather and day/night performance, NATO compatibility, state-of-the art safety and survivability features, and advanced onboard debriefing capabilities complying with international requirements. The Su-25KM had the ability to use NATO-standard Mark 82 and Mark 83 laser-guided bombs and new air-to-air missiles, the short-range Vympel R-73. This upgrade extended service life of the Su-25 airframes for another decade.
There were, however, not many customers. Manufacturing was eventually stopped at the end of 2010, after Georgian air forces have been permanently dismissed and abolished. By that time, approximately 12 Scorpions had been produced, but the Georgian Air Force still used the basic models of Su-25 because of high cost of Su-25KM and because it was destined mainly for export. According to unofficial sources several Scorpions had been transferred to Turkmenistan as part of a trade deal.
In the meantime, another, more ambitious project took shape at Tbilisi Aircraft Manufacturing, too: With the help of Israel Aircraft Industries (IAI) the company started the development of a completely new attack aircraft, the TAM-1 “Gvelgeslas” (გველგესლას, Viper). It heavily relied on the year-long experience gathered with Su-25 production at Tblisi and on the tools at hand, but it was eventually a completely new aircraft – looking like a crossbreed between the Su-25 and the American A-10 with a T-tail.
This new layout had become necessary because the aircraft was to be powered by more modern, less noisy and more fuel-efficient Rolls Royce AE 3012 turbofan engines - which were originally intended to power the stillborn Yakovlev Yak-77 twin-engine business jet for up to 32 passengers, a slightly derated variant of the GMA 3012 with a 44 in diameter (112 cm) fan and procured via IAI from the United States through the company’s connection with Gulfstream Aerospace. Their larger diameter (the Su-25’s original Soyuz/Tumansky R-195 turbojets had a diameter of 109,5 cm/43.1 in) precluded the use of the former integral engine nacelles along the fuselage. To keep good ground clearance against FOD and to protect them from small arms fire, the engine layout was completely re-arranged. The fuselage was streamlined, and its internal structure was totally changed. The wings moved into a low position. The wings’ planform was almost identical to the Su-25’s, together with the characteristic tip-mounted “crocodile” air brakes. Just the leading edge inside of the “dogteeth” and the wing roots were re-designed, the latter because of the missing former engine nacelles. This resulted in a slightly increased net area, the original wingspan was retained. The bigger turbofans were then mounted in separate pods on short pylons along the rear fuselage, partly protected from below by the wings. Due to the jet efflux and the engines’ proximity to the stabilizers, these were re-located to the top of a deeper, reinforced fin for a T-tail arrangement.
Since the Su-25’s engine bays were now gone, the main landing gear had to be completely re-designed. Retracting them into the fuselage or into the relatively thin wings was not possible, TAM engineers settled upon a design that was very similar to the A-10: the aircraft received streamlined fairings, attached to the wings’ main spar, and positioned under the wings’ leading edges. The main legs were only semi-retractable; in flight, the wheels partly protruded from the fairings, but that hardly mattered from an aerodynamic point of view at the TAM-1’s subsonic operational speed. As a bonus they could still be used while retracted during emergency landings, improving the aircraft’s crash survivability.
Most flight and weapon avionics were procured from or via Elbit, including the Su-25KT’s modernized “glass cockpit”, and the TAM-1’s NATO compatibility was enhanced to appeal to a wider international export market. Beyond a total of eleven hardpoints under the wings and the fuselage for an external ordnance of up to 4.500 kg (9.900 lb), the TAM-1 was furthermore armed with an internal gun. Due to procurement issues, however, the Su-25’s original twin-barrel GSh-30-2 was replaced with an Oerlikon KDA 35mm cannon – a modern variant of the same cannon used in the German Gepard anti-aircraft tank, adapted to the use in an aircraft with a light-weight gun carriage. The KDA gun fired with a muzzle velocity of 1,440 m/s (4,700 ft/s) and a range of 5.500m, its rate of fire was typically 550 RPM. For the TAM-1, a unique feature from the SPAAG installation was adopted: the gun had two magazines, one with space for 200 rounds and another, smaller one for 50. The magazines could be filled with different types of ammunition, and the pilot was able select between them with a simple switch, adapting to the combat situation. Typical ammunition types were armor-piercing FAPDS rounds against hardened ground targets like tanks, and high explosive shells against soft ground targets and aircraft or helicopters, in a 3:1 ratio. Other ammunition types were available, too, and only 200 rounds were typically carried for balance reasons.
The TAM-1’s avionics included a SAGEM ULISS 81 INS, a Thomson-CSF VE-110 HUD, a TMV630 laser rangefinder in a modified nose and a TRT AHV 9 radio altimeter, with all avionics linked through a digital MIL-STD-1553B data bus and a modern “glass cockpit”. A HUD was standard, but an Elbit Systems DASH III HMD could be used by the pilot, too. The DASH GEN III was a wholly embedded design, closely integrated with the aircraft's weapon system, where the complete optical and position sensing coil package was built within the helmet (either the USAF standard HGU-55/P or the Israeli standard HGU-22/P), using a spherical visor to provide a collimated image to the pilot. A quick-disconnect wire powered the display and carried video drive signals to the helmet's Cathode Ray Tube (CRT).
The TAM-1’s development was long and protracted, though, primarily due to lack of resources and the fact that the Georgian air force was in an almost comatose state for several years, so that the potential prime customer for the TAM-1 was not officially available. However, the first TAM-1 prototype eventually made its maiden flight in September 2017. This was just in time, because the Georgian Air Force had formally been re-established in 2016, with plans for a major modernization and procurement program. Under the leadership of Georgian Minister of Defense Irakli Garibashvili the Air Force was re-prioritized and aircraft owned by the Georgian Air Force were being modernized and re-serviced after they were left abandoned for 4 years. This program lasted until 2020. In order to become more independent from foreign sources and support its domestic aircraft industry, the Georgian Air Force eventually ordered eight TAM-1s as Su-25K replacements, which would operate alongside a handful of modernized Su-25KMs from national stock. In the meantime, the new type also attained interest from abroad, e. g. from Bulgaria, the Congo and Cyprus. The IDF thoroughly tested two early production TAM-1s of the Georgian Air Force in 2018, too.
General characteristics:
Crew: 1
Length: 15.53 m (50 ft 11 in), including pitot
Wingspan: 14.36 m (47 ft 1 in)
Height: 4.8 m (15 ft 9 in)
Wing area: 35.2 m² (378 sq ft)
Empty weight: 9,800 kg (21,605 lb)
Gross weight: 14,440 kg (31,835 lb)
Max takeoff weight: 19,300 kg (42,549 lb)
Powerplant:
2× Rolls-Royce AE 3012 turbofans with 44.1 kN (9,920 lbf) thrust each
Performance:
Maximum speed: 975 km/h (606 mph, 526 kn, Mach 0.79)
Range: 1.000 km (620 mi, 540 nmi) with internal fuel, clean
Combat range: 750 km (470 mi, 400 nmi) at sea level with 4.500 kg (9,911 lb) of ordnance,
incl. two external fuel tanks
Service ceiling: 7.800 m (25,550 ft)
g limits: +6.5
Rate of climb: 58 m/s (11,400 ft/min)
Armament:
1× 35 mm (1.38 in) Oerlikon KDA cannon with 200 rds in two magazines
under the lower forward fuselage, offset to port side.
11× hardpoints with a capacity of up to 4.500 kg (9,911 lb) of external stores
The kit and its assembly:
This rather rigorous conversion had been on my project list for many years, and with the “Gunships” group build at whatifmodellers.com in late 2021 I eventually gathered my mojo to tackle it. The ingredients had already been procured long ago, but there are ideas that make you think twice before you take action…
This build was somewhat inspired by a CG rendition of a modified Su-25 that I came across while doing online search for potential ideas, running under the moniker “Su-125”, apparently created by someone called “Bispro” and published at DeviantArt in 2010; check this: (www.deviantart.com/bispro/art/Sukhoi-Su-125-Foghorn-15043...). The rendition shows a Su-25 with its engines re-located to the rear fuselage in separate nacelles, much like an A-10, plus a T-tail. However, as many photoshopped aircraft, the shown concept had IMHO some flaws. Where would a landing gear go, as the Su-125 still had shoulder wings? The engines’ position and size also looked fishy to me, quite small/narrow and very far high and back – I had doubts concerning the center of gravity. Nevertheless, I liked the idea, and the idea of an “A-10-esque remix” of the classic Frogfoot was born.
This idea was fueled even further when I found out that the Hobbycraft kit lends itself to such a conversion. The kit itself is not a brilliant Su-25 rendition, there are certainly better models of the aircraft in 1:72. However, what spoke for the kit as whiffing fodder was/is the fact that it is quite cheap (righteously so!) and AFAIK the only offering that comes with separate engine nacelles. These are attached to a completely independent central fuselage, and this avoids massive bodywork that would be necessary (if possible at all) with more conventional kits of this aircraft.
Another beneficial design feature is that the wing roots are an integral part of the original engine nacelles, forming their top side up to the fuselage spine. Through this, the original wingspan could be retained even without the nacelles, no wing extension would be necessary to retain the original proportions.
Work started with the central fuselage and the cockpit tub, which received a different (better) armored ejection seat and a pilot figure; the canopy remained unmodified and closed, because representing the model with an open cockpit would have required additional major body work on the spinal area behind the canopy. Inside, a new dashboard (from an Italeri BAe Hawk) was added, too – the original instrument panel is just a flat front bulkhead, there’s no space for the pilot to place the legs underneath the dashboard!
In parallel, the fin underwent major surgery. I initially considered an A-10-ish twin tail, but the Su-25’s high “tail stinger” prevented its implementation: the jet efflux would come very close to the tail surfaces. So, I went for something similar to the “Su-125” layout.
Mounting the OOB stabilizers to the fin was challenging, though. The fin lost its di-electric tip fairing, and it was cut into two sections, so that the tip would become long enough to match the stabilizers. A lucky find in the scrap box was a leftover tail tip from a Matchbox Blackburn Buccaneer, already shortened from a former, stillborn project: it had now the perfect length to take the Su-25 stabilizers! To make it fit on the fin, an 8mm deep section was inserted, in the form of a simple 1.5mm styrene sheet strip. Once dry, the surface was re-built with several PSR layers. Since it would sit further back on the new aircraft’s tail, the stinger with a RHAWS sensor was shortened.
On the fuselage, the attachment points for the wings and the engine nacelles were PSRed away and the front section filled with lots of lead beads, hoping that it would be enough to keep the model’s nose down.
Even though the wings had a proper span for a re-location into a low position, they still needed some attention: at the roots, there’s a ~1cm wide section without sweep (the area which would normally cover the original engine nacelles’ tops). This was mended through triangular 1.5 mm styrene wedges that extended the leading-edge sweep, roughly cut into shape once attached and later PSRed into the wings’ surfaces
The next construction site were the new landing gear attachment points. This had caused some serious headaches – where do you place and stow it? With new, low wings settled, the wings were the only logical place. But the wings were too thin to suitably take the retracted wheels, and, following the idea of a retrofitted existing design, I decided to adopt the A-10’s solution of nacelles into which the landing gear retracts forward, with the wheels still partly showing. This layout option appears quite plausible, since it would be a “graft-on” solution, and it also has the benefit of leaving lots of space for underwing stores, since the hardpoints’ position had to be modified now, too.
I was lucky to have a pair of A-10 landing gear nacelles at hand, left over from a wrecked Matchbox model from childhood time (the parts are probably 35 years old!). They were simply cut out, glued to the Su-25 wings and PSRed into shape. The result looked really good!
At this point I had to decide the model’s overall layout – where to place the wings, the tail and the new engine nacelles. The latter were not 1:72 A-10 transplants. I had some spare engine pods from the aforementioned Matchbox wreck, but these looked too rough and toylike for my taste. They were furthermore too bulky for the Su-25, which is markedly smaller than an A-10, so I had to look elsewhere. As a neat alternative for this project, I had already procured many moons ago a set of 1:144 resin PS-90A engines from a Russian company called “A.M.U.R. Reaver”, originally intended for a Tu-204 airliner or an Il-76 transport aircraft. These turbofan nacelles not only look very much like A-10 nacelles, just a bit smaller and more elegant, they are among the best resin aftermarket parts I have ever encountered: almost no flash, crisp molding, no bubbles, and perfect fit of the parts – WOW!
With these three elements at hand I was able to define the wings’ position, based on the tail, and from that the nacelles’ location, relative to the wings and the fin.
The next challenge: how to attach the new engines to the fuselage? The PS-90A engines came without pylons, so I had to improvise. I eventually found suitable pylons in the form of parts from F-14A underwing missile pylons, left over from an Italeri kit. Some major tailoring was necessary to find a proper position on the nacelles and on the fuselage, and PSRing these parts turned out to be quite difficult because of the tight and labyrinthine space.
When the engines were in place, work shifted towards the model’s underside. The landing gear was fully replaced. I initially wanted to retain the front wheel leg and the main wheels but found that the low wings would not allow a good ground clearance for underwing stores and re-arming the aircraft, a slightly taller solution was necessary. I eventually found a complete landing gear set in the scrap box, even though I am not certain to which aircraft it once belonged? I guess that the front wheel came from a Hasegawa RA-5C Vigilante, while the main gear and the wheels once belonged to an Italeri F-14A, alle struts were slightly shortened. The resulting stance is still a bit stalky, but an A-10 is also quite tall – this is just not so obvious because of the aircraft’s sheer size.
Due to the low wings and the landing gear pods, the Su-25’s hardpoints had to be re-arranged, and this eventually led to a layout very similar to the A-10. I gave the aircraft a pair of pylons inside of the pods, plus three hardpoints under the fuselage, even though all of these would only be used when slim ordnance was carried. I just fitted the outer pair. Outside of the landing gear fairings there would have been enough space for the Frogfoot’s original four outer for pylons, but I found this to be a little too much. So I gave it “just” three, with more space between them.
The respective ordnance is a mix for a CAS mission with dedicated and occasional targets. It consists of:
- Drop tanks under the inner wings (left over from a Bilek Su-17/22 kit)
- A pair of B-8M1 FFAR pods under the fuselage (from a vintage Mastercraft USSR weapon set)
- Two MERs with four 200 kg bombs each, mounted on the pylons outside of the landing gear (the odd MERs came from a Special Hobby IDF SMB-2 Super Mystère kit, the bombs are actually 1:100 USAF 750 lb bombs from a Tamiya F-105 Thunderchief in that scale)
- Four CBU-100 Rockeye Mk. II cluster bombs on the outer stations (from two Italeri USA/NATO weapon sets, each only offers a pair of these)
Yes, it’s a mix of Russian and NATO ordnance – but, like the real Georgian Su-25KM “Scorpion” upgrade, the TAM-1 would certainly be able to carry the same or even a wider mix, thanks to modified bomb racks and wirings. Esp. “dumb” weapons, which do not call for special targeting and guidance avionics, are qualified.
The gun under the nose was replaced with a piece from a hollow steel needle.
Painting and markings:
Nothing unusual here. I considered some more “exotic” options, but eventually settled for a “conservative” Soviet/Russian-style four-tone tactical camouflage, something that “normal” Su-25s would carry, too.
The disruptive pattern was adapted from a Macedonian Frogfoot but underwent some changes due to the T-tail and the engine nacelles. The basic tones were Humbrol 119 (RAF Light Earth), 150 (Forest Green), 195 (Chrome Oxide Green, RAL 6020) and 98 (Chocolate) on the upper surfaces and RLM78 from (Modelmaster #2087) from below, with a relatively low waterline, due to the low-set wings.
As usual, the model received a light black ink washing and some post-shading – especially on the hull and on the fin, where many details had either disappeared under PSR or were simply not there at all.
The landing gear and the lower areas of the cockpit were painted in light grey (Humbrol 64), while the upper cockpit sections were painted with bright turquoise (Modelmaster #2135). The wheel hubs were painted in bright green (Humbrol 101), while some di-electric fairings received a slightly less intense tone (Humbrol 2). A few of these flat fairings on the hull were furthermore created with green decal sheet material (from TL Modellbau) to avoid masking and corrections with paint.
The tactical markings became minimal, matching the look of late Georgian Su-25s. The roundels came from a Balkan Models Frogfoot sheet. The “07” was taken from a Blue Rider decal sheet, it actually belongs to a Lithuanian An-2. Some white stencils from generic MiG-21 and Mi-8 Begemot sheets were added, too, and some small markings were just painted onto the hull with yellow.
Some soot stains around the jet nozzles and the gun were added with graphite, and finally the kit was sealed with a coat of matt acrylic varnish.
A major bodywork project – and it’s weird that this is basically just a conversion of a stock kit and no kitbashing. A true Frogfoot remix! The new engines were the biggest “outsourced” addition, the A-10 landing gear fairings were a lucky find in the scrap box, and the rest is quite generic and could have looked differently. The result is impressive and balanced, though, the fictional TAM-1 looks quite plausible. The landing gear turned out to be a bit tall and stalky, though, making the aircraft look smaller on the ground than it actually is – but I left it that way.
Today my friends opened new business - Outdated - Coffee and Desert House. It's very nice and causy place. You can spend some here some really good time.
If you are anywhere around Middleton, step by and try it!
Strobist info:
One flash YN-560 on the right hand side with shot-trough umbrella.
©Alan Yahnke - June 2016
Wittenberg, Wisconsin, Yashica Kyocera 230 AF Super, Yashica Kyocera 28-70 Lens, Outdated Kodak 400 film, Epson V750 Scanner
Taken during Armed Forces Weekend. These ladies were fun.
Camera: Leica M2, Elmar 90mm f4
Film: Outdated Plus-x
Processed by thedarkroom.com
Image by: Leslie Lazenby
May 2016, Findlay, OH
EDINBUGH outdated AGFA Vista Plus 200 in 1986 LEICA M6 35mm f1.4 Canadian Leitz SUMMILUX Sad but Famous story of a faithful Dog 'Bobby' who slept on his master's Grave in all weathers
Rather outdated for a different reason is the store's huge electronics department, set up as a complete store-within-a-store, with separate checkouts and everything. While the decor actually looks fairly nice (except the purple panel on the circle in the foreground and the wallpaper in the store, which I'm sure is full of dead brands), just the concept of having such a large dedicated electronics "store" feels somewhat old-fashioned in this day and age. At least they seem to be keeping the product selection up to date, unlike some other stores (I'm looking at you, Kmart)! :)
El Fairey Swordfish ja el 1939 tenia pinta d'avió antiquat, i encara més durant la Segona Guerra Mundial, penseu que en aquell conflicte s'estrenaren diversos caces i bombarders a reacció. Però aquesta baluerna fou el principal torpeder de portaavions de la Royal Navy, i enfonsà la flota italiana a Tarento (abans que els japonesos fesin el mateix amb els americans a Pearl Harbour), i especialment donà el toc de gràcia al cuirassat Bismarck, ja que un sol impacte de torpede d'un Swordfish li destrossà el timó, limitant-lo a navegar en cercles. Això el condemnà davant els cuirassats britanics perseguidors.
ca.wikipedia.org/wiki/Cuirassat_Bismarck#L.27atac_dels_Sw...
=================================================
The Fairey Swordfish was considered outdated even in 1939, but served in the Royal Navy all WW2, and with full honours. They sunk several Italian battleships at Tarento, and crippled the German battleship Bismarck with a torpedo hit just in the rudders, jamming them.