View allAll Photos Tagged Options
Mercedes-Benz extended its naming strategy in the 1990s to include its ever increase diversity of vehicle lines.
The S-Class was already a known quantity, while the midrange cars (commencing with the W124 range in its final couple of years) became the E-Class, similarly, the new W202 replacement for the W201 190-range became the C-Class. This lineup was added to later in the decade withe the sub-compact, FWD A-Class, and the ML-Class SUV.
The W202 C-Class, however, expanded its mandate with a new estate car version, shown here, and an abundance of powertrain options, 4-cylinder, inline-6 (at launch), followed later by two new V6s and eventually V8 pertrol engines. Also were available were a range of inline-four and inline-five cylinder diesels.
Not included under the W202 model code, but developed as part of the platform was the R170 SLK Roadster and the C208 CLK Coupe and Cabriolet models which replaced the W124-based forebears.
To confuse matters further, Mercedes also sought to apply a spread of 'trim' combinations across almost all variants, Classic, Elegance, Avantgarde, and AMG.
Lights on modified Porsche 911 with F77 options Ybor City Tampa Car Photography - Nikon D300 Nikkor 105 VR micro @ f/8 ISO 200 1/80th tripod mounted with cable release
See more photographs of this Porsche --> jasoncollinphotography.com/blog/2013/7/25/custom-f77-pors...
Reserve car photography for your car in the Tampa Bay area by contacting me today --> jasoncollinphotography.com/contact
Raw files processed with DxO Pure Raw 2 using the Deep prime processing option. Link to purchase software: tidd.ly/39lOdtl
After a long day of shooting in the first snowfall of the year, one that left nearly a foot of snow in a lot of areas, I was sent a message by a friend who informed me that the first NS grain train with run through power was to be delivered to Great Lakes Central at about midnight. That person is the one standing on the front of the locomotive, GLC engineer Matt Cox. He was very adamant that he wanted photos of it. The opportunity of waiting for the signal to enter CN track was not considered, but became an option and led to the opportunity to have him pose with the beast, which he was more than happy to do.
option #1 for DQS11-made with DS quilts fabrics, linen and hexies in the border. Do you like this colorway or the 2nd choice??
Not yet quilted or finished!
Sadly, a debilitating back condition has rendered me near helpless. A chipped cervical vertebrae, and a herniated disc.. I can sit up and move around, but not for long. After several scans, the neurosurgeon did not leave me with any other option but to operate. The first available spot is three weeks away. Till then I am limited to what I can do and that includes using my camera. I have found my small P&S Olympus tough the easiest to handle one handed, so am attempting to complete this challenge round with the simplest of images. Cheers.
ANSH 124 - 17. options
Harlem Valley Psychiatric Center, closed 1994. The facility operated from 1924-1994. In it's heyday, up to 5500 resident patients were housed here in the dozens of buildings. The entire campus spreads over 700+ acres in the peaceful little rural town of Wingdale, NY. Originally constructed to be used as a prison, but that plan was met with much disdain by the local residents who fought the plan whereas it was subsequently converted for use as a state psychiatric hospital.
We were told that a Korean organization has now purchased the entire operation with a plan to restore the buildings and convert all for use of an Evangelist Christian university. (not confirmed) Apparently, OSHA has a permanent party resident there, and there has been fines levied against the owners because of workers found working in asbestos, lead paint, and overall toxic environments.
All interior shots were done through windows, many of which were broken. Obviously, entry into any of the buildings was not available, nor was it an option.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
Following good performance from the pioneering diesel-hydraulic locomotive the DB Class V 80, the Deutsche Bundesbahn planned in 1953 to build several types of new diesel locomotive, primarily to replace steam powered locomotives.These were: V 60, and V 65, both shunters, the V 65.2, also for shunting as well as light freight trains, the heavy DB Class V 200, for express passenger trains, and the universal V 160 for both freight and passenger work on the main network.
The new V 160 class was a central piece in this line-up, because it would replace important steam-powered engines such as the BR 03, BR 23, BR 38.10 (former Prussian P 8 class), BR 39 (ex P 10), BR 50, BR 57 (ex G 10) and BR 78 (ex T 18). Steam heating for passenger coaches was necessary, and a top speed of 120 km/h was specified. Initially, a 1,600 hp powerplant, consisting of two engines of the same type as in the light V 80 was planned, the first newly developed diesel locomotive built for main line service by the Deutsche Bundesbahn (but only built in 10 examples). This dual engine arrangement had already been successfully introduced in the heavy V 200, which was initially powered by two 1,000 hp diesel engines. However, it was soon realized, that, if a single, high-powered engine could be used, weight, complexity and therefore maintenance and other costs would be considerably reduced. The V 160’s design was modified accordingly and a single MTU V16 four-stroke diesel engine was chosen. Both two-axle bogies were powered via drive shafts from a two speed hydraulic drive from Voith, which offered a compromise between the requested high speed for light passenger trains and the alternative reduced second gear with lower top speed, but much higher torque, for freight train service. Gears could only be switched when the locomotive was standing still, though.
In the spring of 1956, V 160 development began at Krupp. Welded steel components along with other lightweight materials were used to keep the axle load well below 20t, so that the V 160 could be safely operated on secondary lines. However, in the main production series of locomotives, some of the lighter weight welded construction was abandoned in favor of less expensively produced components - leading to an increase in axle weight from ~18.5 to ~20t, which was still acceptable but lowered overall production costs. This was furthermore not regarded as a major problem since the DB perspectively started to abandon branch lines, switching to more economical diesel multiple units or giving them up altogether towards the Seventies.
The first V 160 unit was delivered on 6 August 1960, with eight more following by 1962 from both Krupp and Henschel. These prototype units, due to their rounded, “busty” front end, were later to become unusual amongst the entire V 160 family and earned them the nickname “Lollo” (in allusion to Gina Lollobrigida). A final prototype V 160 010, the tenth, was manufactured by Henschel in 1963 and the first to feature the serial locomotives’ angled front end, which was inspired by the design of the super-heavy V 320 Henschel prototype.
Despite the single main engine, the V 160 was still a complex locomotive. In addition to the main engine, the V 160 featured a small, independent auxiliary diesel engine, driving a generator providing the 110 V electrical supply for lighting as well as driving an electric air compressor for the brakes. The steam heating apparatus, sourced from Hagenuk and powered by fuel oil, took up one end of the locomotive, between the engine and drivers cabin. It had the capacity to satisfactorily heat 10 coaches when the outside temperature was -10°C. For passenger train service, most V 160 locomotives were also equipped for push-pull operation, as well as for multiple working, controlled via a 36 pin control cable and respective sockets on the locomotives front ends.
The prototypes performed well, and volume production began, numbers V 160 011 to V 160 224 being built between 1964 and 1968 by Krupp, Henschel, KHD, Krauss-Maffei and MaK. The first V 160/216 locomotives entered service on the Hamburg to Lübeck line, working push-pull double decked passenger trains, replacing the BR 38.10 and BR 78 steam engines. The engines were also used on freight workings as well. On push-pull passenger working, the locomotives were sometimes found in the middle of the train - which facilitated easier separation of carriages en route.
By the time the 156th example was under completion, the Deutsche Bundesbahn changed its numbering system. From then on, the V 160 class were re-designated as Class (Baureihe = BR) 216, with the individual unit numbering continuing as before. Over the next decade, because of changing requirements – mostly in terms of increased power, speed as well as the requirement for electrical passenger heating – a number of related classes sprang up, the BR 210, 215, 217, 218 and 219. Although some were a little longer and carried additional components (e.g. an auxiliary jet engine), all of them were essentially based on the original V 160 and more than 800 machines of all types were eventually built.
Since the 1990s, the Bundesbahn’s BR 216 locomotives scope of work started to shift more on freight than on passenger trains because of the lack of steam-heated passenger stock. From 2000 onwards, the Deutsche Bahn AG’s BR 216 fleet was phased out, with the last locomotive being decommissioned in 2004.
Several locomotives were sold to private operators like rail construction companies and remained in frequent use, and some retired BR 216s were re-built and offered for sale, too. The first in the series of rebuilt Class 216s was called type “DH 1504” and created in 1998 by the firm 'On Rail'. Despite only little external changes, the result was an almost completely new locomotive, only the transmission, bogies and frame were saved from the original locomotive. The original V16 diesel engine with 1,370 kW (1.900 hp), was replaced with a lighter but more powerful 1500 kW (2,085 hp) V12 four-stroke diesel engine, also from MTU. On customer demand, a new electric Webasto heating system could be installed instead of the original steam heating system, making the DH 1504 capable of operating modern passenger trains, and for this purpose the units were also fitted for multiple working as well as for remote control operation (e.g. for shunting). Another option was additional ballast, so that the axle load could be kept at 20 tons for better traction. Otherwise, 18 t axle load was standard for the revamped DH 1504.
Since 1998, 6 of these locomotives were re-built for private operators in Germany. By late 2019, three DH 1504 locomotives were in the use of the Osthannoversche Eisenbahnen (OHE), two work for the Niederrheinische Verkehrsbetriebe (NIAG) and one for the Mindener Kreisbahnen (MKB). However, the biggest sales success for OnRail’s modernized BR 216 was the export to Poland, where the PKP (Polskie Koleje Państwowe, Polish State Railways). After its privatization in 2001, the PKP was looking for a low-cost replacement for its last ST-43 Class diesel electric freight locomotives of Romanian origin, which dated back to the 1960ies. Twenty DH 1504 locomotives for mixed duties were built by OnRail between 2001 and 2005 and entered PKP service as Class SU-29 (spalinowa uniwersalna = mixed-traffic diesel locomotive with hydraulic transmission and multiple-unit control). Their initial primary field of duty was the cross-border freight traffic on the east-west relation on the PKP “Polskie line Kolejowe”, the so-called “Niederschlesische Gütermagistrale”. Since 2005, this route had been expanded, electrified and became double-railed, so that the SU-29s gradually took over more and more passenger train duties on non-electrified major lines. The SU-29 machines are expected to remain in PKP service beyond 2030.
General characteristics:
Gauge: 1,435 mm (4 ft 8½ in) standard gauge
UIC axle arrangement: B´B´
Overall length: 16,800 mm (52 ft 57⁄8 in)
Pivot distance: 8,600 mm
Bogie distance: 2,800 mm
Wheel diameter (when new): 1000 mm
Fuel supply: 3,800 l
Service weight: 80 t
Engine:
MTU 4000R20 V12diesel engine with 1500 kW (2,085 hp) at 1,800 RPM
Gearbox:
Voith L821rs 2-speed gearbox
Performance:
Maximum speed: 120 km/h (75 mph) or 80 km/h (50 mph)
Torque: 235,2 kN
The kit and its assembly:
Well, this is a rather unusual what-if “build”, since this not a model kit as such but rather the conversion of a readymade H0 gauge model railway locomotive for the “Back into service” group build at whatifmodelers.com in late 2019.
The inspiration was not original, though: some time ago I stumbled across a gift set from the former East-German manufacturer Piko, apparently for the Polish market. It contained a set of double deck passenger wagons, and a (highly simplified, toy-like) German BR 216 in PKP markings. It was called SU-29 and carried a very crude and garish green livery with yellow front ends – inspired by real world PKP diesel locomotives, but… wrong. I found this so bizarre that it stuck in my mind. When I dug a little further, my surprise even grew when I found out that there were other national adaptations of this simple Piko BR 216 (e .g. for Denmark) and that Piko’s competitor Roco offered a similar BR 215 in PKP colors, too! This time, the fictional locomotive was designated SU-47 (which cannot be since this would indicate a locomotive with electric power transmission – poor job!), and it also wore a bright green livery with yellow front markings. Bizarre… And the PKP does NOT operate any BR 216 at all?!
However, with the GB topic in mind, I decided to create my own interpretation of this interesting topic – apparently, there’s a market for whiffy model locomotives? The basis became a 2nd hand Märklin 3075 (a BR 216 in the original red DB livery), not a big investment since this is a very common item.
In order to easy painting, the locomotive was disassembled into its major sections and the body stripped of any paint in a one-week bath in oven cleaner foam, a very mild and effective method.
The heavy metal chassis was not modified, it just received a visual update (see below).
The upper body underwent some cosmetic surgery, though, but nothing dramatic or structural, since the DH 1504 described above only differs in minor external details from the original BR 216. I decided to modify the front ends, especially the lights: Locomotives in PKP service tend to have VERY large lamps, and I tried to incorporate this characteristic feature through masks that were added over the original light conductors, scratched from styrene tube material.
In the course of this facial surgery, the molded handles at the lower front corners were lost. They were later replaced with three-dimensional silver wire, mounted into small holes that were drilled into the hull at the appropriate positions. Fiddly stuff, but I think the effort was worth it.
The original vent grills between the lower lamps were sanded away and covers for the multiple working cable adapters on the front ends added – scratched with small styrene profile bits.
For a cleaner, modern look, I removed the original decorative aluminum profile frame around the upper row of cooling louvers. The roof was modified, too: beyond the bigger headlight fairing, the exhaust for the auxiliary diesel engine was removed, as well as the chimney for the old steam heating system. The diesel engine’s exhaust pipes were lengthened (inspired by similar devices carried by DB BR 218), so that the fumes would be deviated away from the locomotive’s hull and the following wagons. Horns and a blade antenna for each driver’s cabin were added, too.
Painting and markings:
Both Piko and Roco V 160s in PKP markings look garish – righteously, though, since PKP locomotives used to carry for many years very striking colors, primarily a dark green body with a light green/teal contrast area on the flanks and yellow quick recognition front markings. However, I did not find any of the two model designs convincing, since they rather looked like a simple toy (Piko) or just wrong (Roco, with a surreal grass green contrast tone instead of the pale teal).
I rather went for something inspired by real world locomotives, like the PKP’s SU- and SP-45s. The basic design is an upper body with a dark green base (Humbrol 76, Uniform Green) and a pale green-grey area around the upper row of louvres (an individual mix of Humbrol 96 and 78). The kink under the front windows was used for waterline reference, the front section under the windows (in the dark green base) was painted in bright yellow (Humbrol 69) as a high-viz contrast, a typical feature of PKP locomotives. The chassis received a grey-green frame (somewhat visually stretching the locomotive) with bright red (Humbrol 19) headstocks, a nice color contrast to the green body and the yellow bib.
Silver 1.5mm decal stripes (TL Modellbau) were used to create a thin cheatline along and around the whole lower section. At some time I considered another cheatline between the light and dark green, but eventually ignored this idea because it would have looked too retro. The locomotive’s roof became medium grey (Revell 47).
The running gear and the tanks between the bogies were painted in very dark grey (Humbrol 67, similar to the original DB livery in RAL 7021) and weathered with a light black ink wash, some thinned Burnt Umbra (simulating dust and rust) plus some light dry-brushing with dark grey that emphasized the surface details. This used look was also taken to the upper body of the locomotive with watercolours (Grey, Black and some Sienna and Burnt Umbra) for a more natural look of daily service – rather subtle, and I emphasized the louvres, esp. on the light background, where they tended to disappear.
Individual markings consist of single decal letters in silver and white in various sizes (also TL Modellbau) for the locomotive’s registration code as well as of H0 scale catenary warnings from Nothaft Hobbybedarf, plus some generic stencils from various model decal sheets (incl. Cyrillic stencils from an 1:72 MiG-21 decal sheet…).
For a uniform finish I gave the locomotive an overall coat of matt acrylic varnish from the rattle can – it still has a slightly sheen finish and matches well the look of Märklin’s standard rolling stock.
A different kind of what-if project, but this has not been my first H0 scale locomotive conversion. The fictional PKP SU-29 looks a bit weird, with the garish paint scheme and the oversized headlights, but this strangeness makes this model IMHO quite convincing. The model is fully functional, even the light works well in the enlarged headlight fairings. Maybe I’ll sell it, since I do not have the appropriate model railway set at hand to effectively use it (which is also the reason for the rather limited scope of pictures of the finished item). And I am curious what people might be willing to pay for such a unique, fictional item?
Collection Freddy Deklerck
Les Grandes Marques du Monde au Grand Palais
Bonhams
Parijs - Paris
Frankrijk - France
February 2019
Estimated : € 15.000 - 20.000
Sold for € 23.000
Mercedes-Benz introduced its new medium-sized, S-Class range at the International Motor Show, Frankfurt in 1979, there being no fewer than seven models with the new W126 body style. Launched at the Frankfurt Auto Show in 1985, the 560 SEC coupé was an addition to the line-up and the most powerful of the three luxury coupés then on offer. This new model retained the existing bodyshell virtually unchanged but was powered by the new 5.547cc version of the M117 all-alloy V8 engine producing 300bhp (DIN), though customers resident in the USA had to make do with a considerably less powerful version. As befitted one of Mercedes-Benz's flagships, the 560 SEC came standard with a host of desirable features while customers could choose from an equally lengthy list of options. Despite its elevated price, the 560 SEC would turn out to be the most popular of the W126 coupés.
First registered on 4th May 1988, this 560 SEC is believed to have been delivered new to France and thus is one of the rarer European-specification 300 horsepower models. Accompanying documentation includes with the Étoile booklet from Mercedes-Benz France giving six months warranty on a used vehicle and recording that this car had recorded only 32.000 kilometres in September 1990 when it was sold by Mercedes-Benz International Garage SA. Bought by the current owner to form part of his collection in 2007, this beautiful modern Mercedes is offered with French Carte Grise.
+++ DISCLAIMER +++
Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!
Some background:
The BAC Jet Provost was a British jet trainer aircraft that was in use with the Royal Air Force (RAF) from 1955 to 1993. It was originally developed by Hunting Percival from the earlier piston engine-powered Percival Provost basic trainer, and later produced by the British Aircraft Corporation (BAC). In addition to the multiple RAF orders, the Jet Provost, sometimes with light armament, was exported to many air forces worldwide. The design was also further developed into a more heavily armed ground attack variant under the name BAC Strikemaster, which was not operated by the Royal Air Force but became a worldwide export success.
The Jet Provost was produced for the Royal Air Force in several variants with gradually stronger engines and other detail improvements, the first trainers entered RAF service in 1955. A major development step was the T.5 variant in 1967 with a pressurized cabin, a modified front section and the option for export customers to arm it with machine guns and underwing hardpoints. The T.5 was fitted with the Viper 201 or 202 turbojet engine and its versatility encouraged the RAF to utilize the Jet Provost in more roles besides basic training. With a top speed of 440 mph, excellent maneuverability, mechanical reliability and low operating costs, the Jet Provost was utilized as an aerobatic aircraft, for air warfare and tactical weapons training as well as for advanced training. T.5 deliveries from BAC's Warton factory commenced on 3 September 1969, and operators of the type included the RAFs Central Flying School and No. 1, No. 3, and No. 6 Flying Training Schools. During their career the T.5s were modified with improved avionics and a rough coating on the wing to break up the smooth airflow and give the trainee pilot an early indication of the onset of a stall (the T.5's original clean wing gave the pilot little warning); upgraded aircraft were re- designated T.5A. A sub-variant, unofficially designated T.5B, was a small number of T.5As fitted with wingtip-tanks (so far only used by export customers) and special equipment for long-range low-level navigator training.
During the Mid-Eighties the RAF started to look for a more economical successor for the aging Jet Provost fleet, and this eventually became the turbo-prop Shorts Tucano. The Tucano was selected in 1985 in preference to the Swiss Pilatus PC-9 and the British Hunting Firecracker. The first Tucano flew in Brazil on 14 February 1986, with the first Shorts built production aircraft flying on 30 December 1986. However, problems with the ejection seats delayed the introduction of the aircraft into service until 1989. During this period the Jet Provost remained the RAF’s mainstay trainer, but it was gradually withdrawn from RAF service, mostly due to many airframes’ age. However, late in their career a handful of these robust aircraft eventually saw frontline use and were deployed in a hot conflict during the first Gulf War, in an unexpected but important role that paved the way for new air strike tactics.
When the RAF took part in combat operations during Operation Granby/Desert Storm in 1991, it had been anticipated that complex and fast attack aircraft like the Tornado would autonomously perform air strikes, either with iron bombs against area targets or with precision weapons like laser-guided glide bombs against important or small objects. However, early experience from the front lines showed that deploying precision weapons was not easy: target acquisition and then both target designation and weapon deployment were not feasible with just a single aircraft – it would be exposed to potential enemy fire for too long or require two or more passes over the target, so that any surprise moment was ruined. During the early stages of the RAF’s air raids a strike group of six aircraft would require two of them to act as dedicated target designators, selecting and illuminating targets with laser projectors for other aircraft. Another problem was that these scouts had to fly ahead of the strike force, check out the battlefield and loiter at relatively slow speed in hostile environment until the fast strike aircraft would arrive and drop their weapons. “Wasting” Tornados and their strike capability for these FAC duties was regarded as inefficient, and an alternative aircraft that was better suited for this task was chosen: the vintage but small and nimble Jet Provost T.5A!
Early on, this had been thought to be "unlikely”, but following a short-notice decision to deploy, the first batch of six aircraft were readied to deploy in under 72 hours. These were dedicated long-range navigational trainers, operated by 79(R) Squadron as part of No. 229 Operational Conversion Unit, and the aircraft were hastily prepared for their unusual mission. This included the removal of the aerodynamic wing coating to improve the flight characteristics again, the adoption of desert camouflage, mounting of underwing hardpoints and additional equipment like an encrypted radio with better range and navigation systems (including a GPS sensor in a spinal fairing). As protective measures, Kevlar mats were added to the cockpit floor and lower side walls, as well as a passive radar warning system with sensors on nose and fin and chaff/flare dispensers under the rear fuselage. A fixed refueling probe was considered for the transfer flight and to extend loiter time during missions via air-to-air refueling, but this was not realized due to the lack of time.
To mark their special status the machines were (now officially) designated T(R).5B. They departed from RAF Brawdy in Wales for the Middle Eastern theatre early on 26 January 1991. Upon arrival the machines were immediately thrown into action. It now became common for each attack formation to comprise four Tornados or Jaguars and two Jet Provosts; each Jet Provost carried a 144-inch-long (3.66 m), 420-lb (209 kg) AN/AVQ-23E ‘Pave Spike’ laser designator pod on one of the outer underwing stations and acted as backup to the other in the event of an equipment malfunction. The machines would typically not carry offensive loads, except for occasional unguided SNEB missiles to visually mark potential targets, since they did not have a sufficient load-carrying capacity, but they were frequently equipped with drop tanks to extend their range and loiter time, and “Dash 10” (AN/ALQ-101) ECM pods to counter radar-guided weapons against them.
The first combat mission already took place on 2 February 1991, operating at a medium altitude of roughly 18,000 feet (5,500 m), and successfully attacked the As Suwaira Road Bridge. Operations continued, practically every available day, even though missions did not take place at night as the RAF’s ’Pave Spike’ pods (a simplified version of the American AN/ASQ-153) lacked night-time functionality. After the first missions the Jet Provosts received black anti-glare-panels in front of the windscreen – they had been re-painted in the UK without them, and the black panel markedly reduced the camouflage’s efficiency, but the strong and constant sunshine reflection from the Jet Provosts’ bulged nose frequently blinded the crews. Another retrofitted feature was the addition of a video camera to document the targeting missions, which was mounted in a shallow blister on top of the nose, just above the landing light cluster.
When the tactical separation of target designation and strike missions proved to be successful, more and more potent aircraft were sent into the theatre of operations, namely the RAF’s Blackburn Buccaneer, which replaced the Jet Provosts on long-range missions and also carried out strike and dive-bombing missions. Approximately 20 road bridges were destroyed with the help of the target spotter aircraft, restricting the Iraqi Army's mobility and communications. In conjunction with the advance of Coalition ground forces into Iraq, the Buccaneers switched to airfield bombing missions, targeting bunkers, runways, and any aircraft sighted on the ground, while the Jet Provosts were used over less dangerous terrain and closer to the air bases, primarily acting as artillery spotters. However, the designator pods were still carried to mark targets of opportunity and strike aircraft were then called in to eliminate them.
The Jet Provost T(R).5Bs took part in 186 missions during the Gulf War. Two from the total of eight deployed Jet Provosts were lost during their short active career: One was shot down at low level by a MANPADS (probably an IR-guided 9K38 Igla/SA-18 Grouse), both crew members were lost; the other crashed due a failure of the hydraulic system but could be brought down over friendly terrain and the crew ejected safely.
After their return to Great Britain the worn machines were quickly phased out and all T(R).5Bs were retired when 79(R) Squadron was disbanded in August 1992. The last Jet Provosts in RAF service were retired in 1993.
General characteristics:
Crew: 2
Length: 34 ft 0 in (10.36 m)
Wingspan: 35 ft 4 in (10.77 m) with wingtip tanks
Height: 10 ft 2 in (3.10 m)
Wing area: 213.7 sq ft (19.85 m²)
Airfoil: root: NACA 23015 mod; tip: NACA 4412 mod
Empty weight: 4,888 lb (2,217 kg)
Gross weight: 6,989 lb (3,170 kg)
Max takeoff weight: 9,200 lb (4,173 kg)
Powerplant:
1× Armstrong Siddeley Viper Mk.202 turbojet engine, 2,500 lbf (11,1 kN)
Performance:
Maximum speed: 382 kn (440 mph, 707 km/h) at 25,000 ft (7,620 m)
Range: 780 nmi (900 mi, 1,440 km) with tip tanks
Service ceiling: 36,750 ft (11,200 m)
Rate of climb: 4,000 ft/min (20 m/s)
Wing loading: 32.7 lb/sq ft (160 kg/m²)
Armament:
No internal guns;
4× underwing hardpoints, each capable of carrying 540 lb (245 kg), for a wide range of loads,
including bombs, pods and launch rails with unguided missiles, gun pods;
the inner pair of pylons were plumbed for auxiliary tanks.
The T( R).5B was outfitted with an AN/AVQ-23E Pave Spike laser designator pod and an AN/ALQ-101
ECM pod on the outer stations, plus a pair of 75 Imp gallon (341 liter) drop tanks or pods with 28
unguided SNEB missiles on the inner pylons
The kit and its assembly:
This fictional Gulf War participant was a spontaneous decision to build – actually as a group build submission, but it turned out to be ineligible. After fellow user SPINNERS posted one of his CG skins, a grey RAF low-viz Jet Provost at whatifmodellers.com, I suggested in the respective thread a machine in Desert Pink – and it was promptly realized, including equipment from the Gulf War Buccaneers and LGBs as ordnance. Inspiration enough to dig out an Airfix kit out of The Stash™ for which I had no concrete plan yet and turn the CG rendition into hardware.
The kit is a simple affair and shows its age through (light) flash and shaggy fit around the seams almost everywhere. Nothing dramatic, but you have to invest time and PSR effort. And it features the most complicated landing light arrangement I have ever come across: five(!) single parts if you include the front cover. Why the mold designer did not just provide a single clear piece with three lens-shaped dents at the back - and instead went for a bulkhead, three(!) separate and tiny clear lenses PLUS a clear cover that is supposed to fit in a rather dysmorphic nose opening is beyond me?
The kit was basically built OOB, using the Jet Provost T.5 air intakes and fuselage details but the Strikemaster wing tip tanks and wing pylons. The Pave Spike pod came from a Hasegawa 1:72 aircraft weapon set, the ECM pod from a Revell 1:72 F-16A (the vintage kit of the prototype with the extra engine) – it is shorter than a typical AN/ALQ-101, rather looks like an AN/ALQ-119, but these pods were all modular and could have different lengths/sizes. And I think that the shorter variant suits the Jet provost well, the Pave Spike pod is already quite long for the small aircraft.
Unlike SPINNERS I settled just for drop tanks on the inner wing stations to extend range and loiter time. I also doubt that the Jet Provost had enough carrying capacity and speed for LGBs, and on their target designation missions the RAF Buccaneers did AFAIK not carry much offensive ordnance, either. There’s also not much clearance under a Jet Provost on the ground – I doubt that anything with big fins could safely go under it? However, for a modernized look I replaced the Jet Provost’s OOB teardrop-shaped tanks with cigar-shaped alternatives.
Further mods were only of cosmetic nature: the seats received ejection handles made from thin wire, the characteristic chines under the nose were omitted (the kit’s parts are rather robust, and they were left away on some T.5s in real life, anyway), and I scratched small conformal chaff/flare dispensers from styrene profile and put them under the lower rear fuselage. Fairings for a radar-warning system were scratched from 1.5 mm styrene rods, too, some blade antennae were added around the hull, and sprue material was used to create the GPS antenna “bubble” behind the cockpit. The shallow camera bulge on the nose was created in a similar fashion.
Another problem: the model is seriously tail-heavy. I filled the chamber between the odd landing lights compartment and the cockpit with lead beads, but once the landing gear had been attached the model still sat on its tail. I was lucky that I had not glued the seats into place yet, so I was able to add more ballast in front of the main wheels, therewith creating a bulkhead (which is missing OOB) behind the seats, what was eventually enough to shift the model’s center of gravity forward.
Painting and markings:
Desert Pink was the driving theme for this build (to be correct, it’s FS 30279 “Desert Sand”). While real RAF aircraft from Operation Granby were painted all-over with this tone (and SPINNERS did the same with the CG rendition), I wanted a bit more variety and just painted the upper surfaces and the underside of the leading edges, the inside of the air intakes and the tip tanks in the sand tone, while the undersides were painted in RAF Barley Grey (Humbrol 167), as if an late all-grey low-viz trainer had been painted over just on the upper surfaces.
For the Desert Pink I was able to use the authentic tone, I had a virgin tin of Humbrol 250 in my enamels hoard that now found a good use. After basic painting the kit received an overall black in washing, dry-brushing with Revell 35 (Skin – it’s a perfect match for panel post-shading!) to retain the pinkish hue and, after the decals had been applied, a bit of grinded graphite to simulate wear and dirt and emphasize the raised surface details.
The cockpit interior was painted in Anthracite (Revell 06), the dashboard became medium grey with dark instruments (not painted, thanks to the raised details I simple rubbed some graphite over it, and the effect is nice!). The ejection seats became tar black with grey-green cushions. The landing gear was painted in Medium Sea Grey (Humbrol 165).
The drop tanks became Medium Sea Grey (Humbrol 165) and Barley Grey, as if they had been procured from a different aircraft, while the Pave Spike pod and the ECM pod were both in RAF Dark Green (Humbrol 163), for good contrast to the rest of the model.
Decals/markings come from Xtradecal sheets. The low-viz roundels were taken from a dedicated RAF roundel sheet because I wanted a uniform roundel size (in six positions) and slightly darker print colors. Unit markings and tactical codes came from a Jet Provost/Strikemaster sheet, also from Xtradecal; RAF 79 Squadron actually operated the Jet provost, but AFAIK only the T.4 version, but not the pressurized T.5 or even the T.5A navigator trainers. The nose art at bow side came from a USN EA-6B Prowler.
After some final details (position lights), the model was sealed with matt acrylic varnish.
A quick project, and the Operation Granby Jet Provost looks better than expected. However, I am not sold on the vintage Airfix kit. It clearly shows its age, nothing really went together smoothly, gaps and sinkholes, PSR on every seam. It also required tons of nose weight to keep it on its spindly legs. The alternative Matchbox kit is not much better, though, with even more simple surface and cockpit details, but at least the parts fit together. I might try to hunt down a Sword kit if I should want to build one again, AFAIK the only other IP option? The result looks interesting, though, quite purposeful with its low-viz markings, and the simple livery turns out to be very effective over the desert terrain where it would have been supposed to operate. Furthermore, the model fits well into the Jet Provost’s historic final years of duty with the RAF – even though in an unlikely role!
ANRKY Wheels
Ferrari SF90
X|Series 3-piece
Model: S3-X1
21x9.5
22x12.5
Satin Black Center
Gloss Black Outer
Gloss Black Inner
Hidden Hardware
OE Cap Option
Shop: Wheels Boutique
Van's US Open 2014 Huntington Beach with pro surfers Alana Blanhard, Lakey Peterson, Laura Enever, Sally Fitzgibbons, Coco Ho, Stephanie Gilmore, newcomers Nikki Van Dijk and Tatiana Weston-Web, and more!
The new Nikon D810 rocks for sports photography! New Instagram!
Goddess videos! vimeo.com/45surf
Nikon D810 Photos Pro Women's Surfing Van's US Open Sports Photography Tamron SP 150-600mm F/5-6.3 Di VC USD !
I shot in DX mode which crops away the extra pixels and takes me 1.5X closer while allowing for up to 7 FPS with the Nikon D810's Nikon MB-D12 Battery Grip using the 8 AA battery option! 8 Duracles took me through around 3,000 shots no problem--maybe more! I was shooting at the equivalent of 900mm with the 1.5x crop factor! Pretty close! Had I gone with the Nikon D4s, I would have gotten 12 fps, but no DX crop factor, as the sensor has only around 14mp, compared to the d810's 36 megapixels! Sure the larger pixel size on the Nikon D4s full frame sensor comes in handy indoors or at night, but in the brigth sun, there's more than enough light for the smaller pixels in crop mode! Sure we lose some pixels from the outer edges when shooting in DX crop mode, but most of those pixels would be cropped away in lightroom anyway. And the smaller files make the memory cards last longer, while also upping the FPS to 7 shots per second! Not quite 12 FPS< but still awesome and enough I felt!
What a beautiful way to test the Nikon D810 and Tamron 150-600mm zoom lens for sports photography!
Athletic graceful girl goddesses! Tall, thin, fit and in shape! Pro women's surfers form the van's us open wearing both long wetsuits and bikini bottoms with shorty wetsuit tops/summer wetsuits. Sexy, beautiful beach babes and water goddesses all! Many are professional swimsuit bikini / surf lifestyle models too!
Tamron SP 150-600mm F/5-6.3 Di VC USD Autofocus lens for Nikon AF-D Cameras.
The new Nikon D810 rocks for sports photography New Instagram!
Sometimes what you think is a dead end is really just off the beaten path...or a bunch of thornbushes.
Frankie necesita ayuda para decidir la decoración de su nuevo salón, a vosotros qué sofas os gustan más????
Frankie needs help deciding decorating your new room, to you what I like best sofas????
ANRKY Wheels
Ferrari 296GTB
SeriesONE Monoblock
Model:
21x9.5
22x12.5
Gloss Black
OE Cap option
Shop: Wheels Boutique
Two very different options here :-) Which do you prefer partner? And are there any fabrics I've chosen that you don't like?
French Quarter, New Orleans, 2017
It was a warm night in late April but the man was all bundled up, ready for yet another night outdoor, nearby New Orleans' Jackson Square. However, it is almost impossible to sleep on one of those benches there; armrests are "cleverly" installed to divide each bench length into 2 short sections thus preventing lying on them.
Introducing the Ooh-la-licious Skins® Marilyn Collection, with 20 glowing skins in 9 tones (Peaches & Cream, Honey, Caramel, Amaretto, Mocha, Cocoa, Brown Sugar, Chocolate & Espresso). The Ooh-la-licious® Marilyn Collection is sold exclusively inworld at the Ooh-la-licious Skins® Main Store in Harbor East. slurl.com/secondlife/Harbor%20East/95/91/31
Each Fatpack Includes:
• Twenty (20) Skins with Signature Marilyn Beauty Mark & Luscious, Juicy Lip Glosses that Pop with Color & Shine
• Two (2) Modifiable Shape Options: (Celebrity Shape and L.inc Phat Azz Shape)
• Two (2) Cleavage Options & 2 Lolas Options
• Marilyn Blonde Hairbase Tattoo Layer
• Retro Swimsuit from Glamour Blaze Designs™
★ The Marilyn Collection is compatible with all Ooh-la-licious® Classique skin appliers. We have appliers for Lolas Tango/Mirage, Slink Hands/Feet, L.inc Phat/Cute Azz & Brazilia Butt available.
★ BONUS RELEASE! Ooh-la-licious Skins® Marilyn Universal Mesh Head Skin Appliers for The Mesh Project! We are proud to offer our first ever mesh head appliers in collaboration with The Shop's Mesh Project.
The story of the last Romanovs, the cold-blooded murder of Nicholas II and his entire family in the basement of a house in which they had been imprisoned for two and a half months in the city of Yakaterinburg on July 17, 1918, is well known and has been told and retold over and over again. What is not so well known is the fascinating story of what happened to the bodies after the executions, and where, when and how the remains were discovered and identified, because all this came to light relatively recently, after the fall of the Soviet Union. The Soviets did everything they could to prevent the site of the murders to become a shrine. In 1977, they even had the house where the executions took place, known as Ipatiev House (see below), demolished because it was becoming a popular pilgrimage site for an increasing number of Russians wanting to honor the memory of the imperial family. This, of course, went contrary to the Soviet ideology so they had the place torn down. Thus disappeared forever an important historical landmark that today would have great value as a tourist attraction in this remote and seldom visited part of Russia. They built a church nearby, but the actual site remains unoccupied to this day; it is a patch of grass full of weeds and a few crosses (see second below).
The executions took place on July 17, 1918, but it wasn't until 1979 – some 60 years later – that a geologist and amateur archeologist named Alexander Avdonin, using information obtained from the son of one of the executioners, was able to locate the graves and began exhuming the bodies. The site where the remains were discovered is located some 10 km northwest of where the murders took place. Since I cannot possibly write it all here, I invite those who might be interested in reading a full account of what happened (and where, when and how) to click here for a captivating read . This excellent record – do go through the entire site; there are several pages – does not, however, mention a second option of where the bodies were disposed of, an option that the Russian Orthodox Church believes is the true version. For an account of that version, please click here .
Now, about the photo above. After the discovery and positive DNA identification of the remains – including those of the two children that were missing initially, Alexei and his sister Maria Nikolaevna (not Anastasia as it was long believed) – the bodies of Nicholas II and of his immediate family were transported to St. Petersburg and laid to rest in St. Catherine Chapel (seen here), which is a side chapel in Peter and Paul Cathedral. In 2000, all were canonized by the Russian Orthodox Church, a move that was controversial especially within the church itself.