View allAll Photos Tagged NewBuild
Carmet Tug Company's newbuild, Multirole Easyworker 2080 "CT Barnston", does some anchor handling and chain work at Woodside Ferry Terminal as the tide ebbs.
Local lads doing amazing work yet again!
The weather went from raining to cloudy to sunny and back to raining so on and so forth. Typical lol
You can see how much the tide drops during the series of photos. In such a short amount of time, the time drops dramatically and at such a speed as it usually does on high springs.
Source of info: PDF from their website
CT Barnston multirole/multicat workboat
IMO: 9967938
MMSI: 232043206
Call Sign: MLZU5
Registered owner: CARMET TUG CO LTD
Vessel type: Easyworker 2080
Built: Groeneveldt Marine Construction B.V. 2022, Hendrik-Ido-Ambacht, Netherlands
Classification: Bureau Veritas, MCA Workboat Code Cat 2/60
Length: 20.08 meters
Beam: 8.00 meters
Draft: 1.60 meters
Gross tonnage: 70.60
Bollard pull: 15.0 tons
Speed: 9.0 knots
Main engines: 2 x Volvo Penta D 16 MH IMO 3
Total power: 1200 bhp
Gearboxes: Twin Disc MGX 516 DC
Propellers: 2 x 4 blade fixed pitch in nozzles @ 1350 mm
Generator sets: 1 x John Deere 135kVA and 1 x John Deere 65kVA
Electrical system: 24v DC and 220/415V connections
Fuel: 16,000 litres
Water: 7,000 litres
Deck crane: Fassi F800 RA (15,770kg @ 4.25m)
Deck winch: 18t SWL 8m/min
Tugger winch: 5t SWL, 9m/min
Deck capacity: 60 tonnes
Read the Case Study on our Website here:
www.ecolivinguk.com/case-studies/domestic/heat-pumps/a-cl...
Follow us on Twitter: @ecolivinguk
©Ecoliving Ltd.
The green section will be the Youth Department's workroom. The youth desk will be in the center where you see the boxes. The blue section in the back is the youth event room.
BAM/PFA celebrated the mid-point of construction on its new downtown building with a public ceremony and block party on Addison Street on July 17, 2014. Over 500 people attended to show their support by signing one the last steel beams to be put in place. Photo: Peter Cavagnaro
Carmet Tug Company's newbuild, Multirole Easyworker 2080 "CT Barnston", does some anchor handling and chain work at Woodside Ferry Terminal as the tide ebbs.
Local lads doing amazing work yet again!
The weather went from raining to cloudy to sunny and back to raining so on and so forth. Typical lol
You can see how much the tide drops during the series of photos. In such a short amount of time, the time drops dramatically and at such a speed as it usually does on high springs.
Source of info: PDF from their website
CT Barnston multirole/multicat workboat
IMO: 9967938
MMSI: 232043206
Call Sign: MLZU5
Registered owner: CARMET TUG CO LTD
Vessel type: Easyworker 2080
Built: Groeneveldt Marine Construction B.V. 2022, Hendrik-Ido-Ambacht, Netherlands
Classification: Bureau Veritas, MCA Workboat Code Cat 2/60
Length: 20.08 meters
Beam: 8.00 meters
Draft: 1.60 meters
Gross tonnage: 70.60
Bollard pull: 15.0 tons
Speed: 9.0 knots
Main engines: 2 x Volvo Penta D 16 MH IMO 3
Total power: 1200 bhp
Gearboxes: Twin Disc MGX 516 DC
Propellers: 2 x 4 blade fixed pitch in nozzles @ 1350 mm
Generator sets: 1 x John Deere 135kVA and 1 x John Deere 65kVA
Electrical system: 24v DC and 220/415V connections
Fuel: 16,000 litres
Water: 7,000 litres
Deck crane: Fassi F800 RA (15,770kg @ 4.25m)
Deck winch: 18t SWL 8m/min
Tugger winch: 5t SWL, 9m/min
Deck capacity: 60 tonnes
Quite a sight over the last couple of days on New Quay Road, near the port of Poole.
They are building a small block of flats on the site of the Ferryman Pub, and have brought in these modular sections.
They were transported yesterday as a "wide load" and blocked the road for a while, until they manoeuvred into place to be lifted by this large crane.
Lower Hamworthy 04.04.2023
BAM/PFA celebrated the mid-point of construction on its new downtown building with a public ceremony and block party on Addison Street on July 17, 2014. Over 500 people attended to show their support by signing one the last steel beams to be put in place. Photo: Peter Cavagnaro
Read the Case Study on our Website here: www.ecolivinguk.com/case-studies/commercial/heat-pumps/gr...
Follow us on Twitter: @ecolivinguk
©Ecoliving Ltd.
BAM/PFA celebrated the mid-point of construction on its new downtown building with a public ceremony and block party on Addison Street on July 17, 2014. Over 500 people attended to show their support by signing one the last steel beams to be put in place. Photo: Peter Cavagnaro
Carmet Tug Company's newbuild, Multirole Easyworker 2080 "CT Barnston", does some anchor handling and chain work at Woodside Ferry Terminal as the tide ebbs.
Local lads doing amazing work yet again!
The weather went from raining to cloudy to sunny and back to raining so on and so forth. Typical lol
You can see how much the tide drops during the series of photos. In such a short amount of time, the time drops dramatically and at such a speed as it usually does on high springs.
Source of info: PDF from their website
CT Barnston multirole/multicat workboat
IMO: 9967938
MMSI: 232043206
Call Sign: MLZU5
Registered owner: CARMET TUG CO LTD
Vessel type: Easyworker 2080
Built: Groeneveldt Marine Construction B.V. 2022, Hendrik-Ido-Ambacht, Netherlands
Classification: Bureau Veritas, MCA Workboat Code Cat 2/60
Length: 20.08 meters
Beam: 8.00 meters
Draft: 1.60 meters
Gross tonnage: 70.60
Bollard pull: 15.0 tons
Speed: 9.0 knots
Main engines: 2 x Volvo Penta D 16 MH IMO 3
Total power: 1200 bhp
Gearboxes: Twin Disc MGX 516 DC
Propellers: 2 x 4 blade fixed pitch in nozzles @ 1350 mm
Generator sets: 1 x John Deere 135kVA and 1 x John Deere 65kVA
Electrical system: 24v DC and 220/415V connections
Fuel: 16,000 litres
Water: 7,000 litres
Deck crane: Fassi F800 RA (15,770kg @ 4.25m)
Deck winch: 18t SWL 8m/min
Tugger winch: 5t SWL, 9m/min
Deck capacity: 60 tonnes
BAM/PFA celebrated the mid-point of construction on its new downtown building with a public ceremony and block party on Addison Street on July 17, 2014. Over 500 people attended to show their support by signing one the last steel beams to be put in place. Photo: Peter Cavagnaro
BAM/PFA celebrated the mid-point of construction on its new downtown building with a public ceremony and block party on Addison Street on July 17, 2014. Over 500 people attended to show their support by signing one the last steel beams to be put in place. Photo: Peter Cavagnaro
BAM/PFA celebrated the mid-point of construction on its new downtown building with a public ceremony and block party on Addison Street on July 17, 2014. Over 500 people attended to show their support by signing one the last steel beams to be put in place. Photo: Peter Cavagnaro
Carmet Tug Company's newbuild, Multirole Easyworker 2080 "CT Barnston", does some anchor handling and chain work at Woodside Ferry Terminal as the tide ebbs.
Local lads doing amazing work yet again!
The weather went from raining to cloudy to sunny and back to raining so on and so forth. Typical lol
You can see how much the tide drops during the series of photos. In such a short amount of time, the time drops dramatically and at such a speed as it usually does on high springs.
Source of info: PDF from their website
CT Barnston multirole/multicat workboat
IMO: 9967938
MMSI: 232043206
Call Sign: MLZU5
Registered owner: CARMET TUG CO LTD
Vessel type: Easyworker 2080
Built: Groeneveldt Marine Construction B.V. 2022, Hendrik-Ido-Ambacht, Netherlands
Classification: Bureau Veritas, MCA Workboat Code Cat 2/60
Length: 20.08 meters
Beam: 8.00 meters
Draft: 1.60 meters
Gross tonnage: 70.60
Bollard pull: 15.0 tons
Speed: 9.0 knots
Main engines: 2 x Volvo Penta D 16 MH IMO 3
Total power: 1200 bhp
Gearboxes: Twin Disc MGX 516 DC
Propellers: 2 x 4 blade fixed pitch in nozzles @ 1350 mm
Generator sets: 1 x John Deere 135kVA and 1 x John Deere 65kVA
Electrical system: 24v DC and 220/415V connections
Fuel: 16,000 litres
Water: 7,000 litres
Deck crane: Fassi F800 RA (15,770kg @ 4.25m)
Deck winch: 18t SWL 8m/min
Tugger winch: 5t SWL, 9m/min
Deck capacity: 60 tonnes