View allAll Photos Tagged Module
80w solar module 25years life
VRLA battery long life span
high quality inverter.
Germany made controler 8 years life
1.poly crystalline silicon solar module
2.VRLA storage battery with long life span
3.high quality inverter
4.Germany made controler
Solar panel:12V 80W
Battery:12V 50AH
solar inverter:12VDC-220VAC 150W
Stop charging volt(LVD):14.8V
Stop discharging volt (LVD):11V
Stop discharging recovery:12.8V
Charging temperature compensation coefficient:-4.2mv/K per cell
AC output volt:220V
AC output power:<150W
Frequency:50/60HZ
Efficiency:85%min
No-load loss:Less 8mA
Environmental temperature:-40oC- 60oC
Altitude:≤4000M
Protection grade:IP68
Wire size:2.5mm2
module-stacked-petit-en-pin-muuto
www.ideesboutique.com/etageres/6394-module-stacked-petit-...
La collection Stacked Muuto : www.ideesboutique.com/fr/s/702/muuto-stacked
La marque Muuto : www.ideesboutique.com/36_Muuto
La collection de Jds : www.ideesboutique.com/fr/s/701/designer/jds
Eve Core is a complete Bluetooth Low Energy module with chip antenna and several flexible I/O options, and has already passed Bluetooth SIG certification. Eve Core runs the same firmware that is used by the Eve products, including HomeKit pairing, authentication and encryption and management for up to 16 controllers. The Eve Core firmware is developed by Elgato in Germany and the Eve Core module is manufactured by Dexatek Technologies in Taiwan.
The NanoRacks Module-7 mixes samples of two or three liquids in microgravity. The science goals for NanoRacks Modules are proprietary. The client base is international, with researchers from North America and Israel involved in using the hardware and forms the basis for future space station research.
PLS scholars at George Washington's Mount Vernon. Photo by Grant Miller for the Presidential Leadership Scholar Program.
The "Y Module" was created in 1988 and published in "Modular Origami" a self-publication. The module, folded from square papers is based on the 60 degree geometry. When assembled, a "Y" band is form on the triangular faces of the model and a small pinwheel motif on all the corners.
3 of the 5 Platonic Solids can be assembled from this module. They are the Tetrahedron, the Octahedron and the Icosahedron. All of these polyhedra have triangular faces.
6 Modules, folded from 15cm square Kami are used to assemble the Tetrahedron.
Popped down to devon today to pick up Module 2. Not a huge amount of stuff but will let me get one with the fuel system and better understand the constraints of the engine bay
- Fuel tanks straps x 4 plus rubber cusioning strip
- Fuel filler neck & clips
- Fuel level sender
There should also be a coolant header tank kit and a radiator filler neck. the latter is no longer being built by Marlin but you can still get after market ones from them. I'm planning a custom ali rad so will get that built in. the coolant header tank was out of stock but again I'm going to source a nice shiny ali one to fit better in the engine bay so this isn't an issue either.
Stackable modules for my Soropolis project.
Door with pink entrance hall - decorated window - pink door - candlelight date - men's club gathering - sand red roof - green house with blue windows - window with shutters - roof with girl in dormer window - guy emptying bucket
The Apollo Lunar Module (LM) was a two-stage vehicle designed by Grumman to ferry two astronauts from lunar orbit to the lunar surface and back. The upper ascent stage consisted of a pressurized crew compartment, equipment areas, and an ascent rocket engine. The lower descent stage had the landing gear and contained the descent rocket engine and lunar surface experiments.
LM 2 was built for a second unmanned Earth-orbit test flight. Because the test flight of LM 1, named Apollo 5, was so successful, a second mission was deemed unnecessary. LM-2 was used for ground testing prior to the first successful Moon-landing mission. In 1970 the ascent stage of LM-2 spent several months on display at the "Expo '70" in Osaka, Japan. When it returned to the United States, it was reunited with its descent stage, modified to appear like the Apollo 11 Lunar Module "Eagle," and transferred to the Smithsonian for display. (Source: Smithsonian National Air and Space Museum).
My final attempt at this module. I remembered that we had some childrens' skittles and after a few experiments managed to get the timing and settings right.
Défilé militaire du 14 Juillet 2015 sur l'Avenue des Champs-Elysées.
Bastille Day Military Parade
Mise à l'honneur des Compagnons de la Libération.
Photographie © Olivier PRIEUR 2015
Merci pour votre visite, vos commentaires et favoris.
Photo copyright Olivier PRIEUR 2015 - Reproduction et téléchargement interdits.
Merci pour votre visite, vos commentaires et favoris.
Plus d'information sur une photo, merci de me contacter via
mon facebook avec dans le titre du message 'Image Flickr : objet' et le numéro de la photo.
**********************************************************************************************************
Thanks for the visit, comments and favorites.
Please don't use this image on websites, blogs or other media.
© 2015 Olivier PRIEUR All Rights Reserved
**********************************************************************************************************
Second Lunar Module built. Was not designed to make the trip to the Moon or support astronauts but for an unmanned Earth orbital test.
This is my version of the Heptagon Cross module.
The angle for the exact heptagon has 64.29 degrees. My approximation here has 64.33 degrees. It is quite close to it.
The steps 10 to 13 are just for hidding some paper. You can do it also in other ways to get some variations. The width of the flap shouldn't be wider than the width of the pocket.
The assembly of the modules is similar to the assembly of the square cross modules, here only with seven modules.
You can find another short version by Francis Ow: www.flickr.com/photos/61236172@N08/9999830473/.
I made the module in 2001 but did not name it until recently. The module is from 2x1 rectangle [10.5cm x 5.25cm] of 100gsm Marble Pattern papers.
It is interesting to note that the main folds are exactly the same as Dirk Eisner's "Square Cross Module"- www.flickr.com/photos/eisfold/8619111296/in/photostream/ but my method of assembling the modules is totally different.
Voskhod 1 descent module, 1964
The three cosmonauts' couches inside Voskhod were only fitted with difficulty, making the crew crane their necks to see the instrument panels. With no space for a means of escape to be fitted, a retrorocket slowed the spacecraft as it returned to Earth, enabling the cosmnauts to remain on board for the entire mission.
[Science Museum]
Taken from the Cosmonauts: Birth of the Space Age exhibition at the Science Museum (September 2015 to March 2016).