View allAll Photos Tagged IECEx
The Hazloc XEU1 hazardous area and explosion-proof heater range are suitable for use in heavy industry environments where requirements are very demanding. Hazloc Heaters offer heaters that are designed to function accurately and effectively in arduous conditions - Hazloc heaters are certified to ATEX and IECEx.
Hazloc XEU1 - North American Electric = 60 hZ
Hazloc HUH1 - North American Hydronic
Hazloc HHP1 - N/American High Performance Hydronic
Hazloc SRH1 - North American Steam Rig Heater
ATEX and IECEx hazardous area certified electrical heaters.
E2S Warning Signals' GNEx GRP Xenon strobe beacons add visual signaling to the explosion-proof and corrosion-resistant GNEx family. Suitable for all Zone 1, 2, 21, and 22 hazardous location applications, the beacons feature extended temperature range with IECEx and ATEX Ex d approvals. For high ambient light or long distance signaling the GNExB2 beacon is available in 10, 15, and 21 Joule variants producing up to 902cd. The smaller sized GNExB1 is available for where a 5 Joule (up to 117cd) unit meets requirements.
VEGAFLEX – Guided Wave Radar Level Measurement
TDR Sensor For Continuous Level Measurement
The VEGAFLEX 65 is a coax level sensor used for the measurement of liquids. The VEGAFLEX 65 is an ideal solution for the measurement of solvents, fuels and low viscosity liquids.
VEGAFLEX 65 TDR Sensor - The Advantages
Minimum time and cost expenditure thanks to simple setup without medium
Simple instrument selection, because unaffected by product features
Individual mounting options, because measurement is possible independent of sockets and vessel installations through the coaxial design
The VEGAWAVE 63 is a vibrating level switch for in fine-grained solids and powders.
VEGAWAVE 63 vibrating level switch is robust withstanding the toughest conditions and highly reliable. It can be used with bulk solids with a low density as the turning fork allows use with abrasive and adhesive products. The position pf the switching point can be determined through the length of the tube extension.
VEGAVIB 63 is a vibrating level switch for coarse-grained and granular bulk solids.
VEGAVIB 63 vibrating level switch is highly accurate, reliable and easy to clean as the optimised design of the vibrating rod is corner free with no edges which stops the bulk solid from causing a jam. The position of the switching point is specified through the tube extension.
The VEGASWING 61 is a universial vibrating level switch that can be used in all liquids. VEGASWING 61 vibrating level switch is highly accurate independent of the mounting postion and is an economical solution giving maximum safey and reliability in a many application range.
VEGASWING 61 can be used as an empty or full detector , as approved dry run protection, pump protection in vessels and pipelines and overfill protection. It can be mounted in vessels and pipelines independent of the installation position.
Hydrostatic Level Measurement
The VEGAWELL 52 hydrostatic level sensor is a supension pressure transmitter suitable for continuous level measurement of liquids.
Typical applications are measurements in the shipbuilding industry as well as in deep wells and in water/waste water.
VEGAWELL 52 Hydrostatic Level Sensor - Advantages
High reliability through maximum overload and vacuum resistance of the ceramic
High plant availabillity intergrated overvoltage
Versatile use through robust housing and cable design
The VEGASWING 63 is a universial vibrating level switch that can be used in all liquids. VEGASWING 63 vibrating level switch is highly accurate independent of the mounting postion and is an economical solution giving maximum safey and reliability in a many application range.
VEGASWING 63 can be used as an empty or full detector , as approved dry run protection, pump protection in vessels and pipelines and overfill protection. The position of the switching point is determined through the tube extension.
VEGA Point Level Detection
The rod electrode VEGA EL 1 is a conductive level switch for conductive liquids.
The VEGA EL 1 level switch is suitable for use as a dry run protection system and overfill in conjunction with the signal conditioning instruments VEGATOR 632 and VEGATOR 256C.
FIBERTRAC 31 – Radiation Based Level Measurement
The FIBERTRAC 31 level sensor uses the radiation based measuring principal and is an ideal solution for level & interface measurement of liquids and bulk solids.
It is especially suitable for use in extreme process conditions and for measurement of aggressive products. You can rely on the FIBERTRAC 31 for precise measuring results.
FIBERTRAC 31 Radiation Based Level Sensor - Advantages
High plant availability through non-contact measurement
Simple mounting on round and conical vessels through flexible detector
Cost saving through use of only one sensor up to 7 m measuring range
ASCO Numatics has IECEx Certification for a range of products that are already ATEX compliant for use in hazardous areas
Ultrasonic Level Measurement
The VEGASON 61 is an ultrasonic sensor for continuous level measurement and is an ideal solution for liquids or bulk solids.
The VEGASON 61 can be used for the measurement of liquids in storage tanks or open basins.
The ultrasoninc level sensor can also be used for the detection of bulk solids in small vessels or open containers. The non-contact measuring principle is independent of product features and allows a setup without medium.
VEGASON 61 Ultrasonic Level Sensor - Advantages
Non-contact measurement
Reliable measurement independent of product features
Price-favourable solution for simple application
VEGA Radiation Based Sensor - MINITRAC 31
The MINITRAC 31 radiation based sensor is used for contactless density measurement of bulk solids and liquids.
MINITRAC 31 radiation based sensor is suitable for mounting in hard to access areas due to its compact design. MINITRAC 31 from outside pipelines and vessels wall can contactlessly determine the density.
MINITRAC 31 is a NaI detector for non-contact level detection and density measurement in vessels and on pipelines.
VEGA Point Level Detection
The VEGACAP 62 is a capacitive level switch for level detection in all areas of industry. VEGACAP 62 capacitive level switch is ideal for measurement of bulk solids as the sensor has a partly insulated probe and can be used in non-conductive liquids such as for example oil.
The proven mechanical construction ensures a high functional safety.
Rugged key-operated phone with Android 10 operating system
Features:
Android 10
Size: 152,8 x 62 x 26,7
Weight: 318 g
Bluetooth 5
2 cameras: 13 MP AF rear camera and 5 MP FF front camera
External memory microSD up to 128 GB
Near Field Communication
Dual nano-SIM
Universal lateral ISM interface
Waterproof: 1 hour. Up to 2 m, impervious to dust and microparticles
2,6“Gorilla Glass, 3. generation, resolution 320 x 432 pixel
Battery replaceable, 3,8 V; 14,98 Wh, 4050 (typ. 4200) mAh
Usable with gloves
Amplified loudspeaker
2,4 GHz + 5 GHz: IEEE, 802.11a/b/g/n/ac/e/k/r/h with max. 8 connections hotspot
G-sensor, gyroscope, gravity, ambient light, magnetic- and proximity sensor
SOS key: Lone worker protection LWP ready (third party application required, based on country specific regulations)
Approvals:
ATEX approval: EX-Zone 1/21, II 2G Ex ib IIC T4 Gb, II 2D Ex ib IIIC T135°C Db IP6X
EAC approval: 1Ex ib IIC T4 Gb X, Ex ib IIIC T135°C Dc X
IECEx approval: EX-Zone 1/21 Ex ib IIC T4 Gb, Ex ib IIIC T135°C Db IP6X
NEC500 approval: Class I, II, III Division 1, Groups A B C D E F G, T4 Intrinsically Safe
For more information visit www.fsesafe.com/atex-mobile-phones.php
For more information kindly visit us at www.fsesafe.com and for any enquiries email us at sales@fsesafe.com
The VEGAVIB 61 is a vibrating level switch used for coarse-grained and granular solids.
VEGAVIB 61 is highly accurate, reliable and easy to clean as the smooth surface of the vibrating rod is corner free with no edges which stops the bulk solid from causing a jam
VEGA Point Level Detection
The rod electrode VEGA EL 3 is a conductive level switch for conductive liquids.
The VEGA EL 3 level switch is suitable for use as a dry run protection system, overfill or pump control in conjunction with the signal conditioning instruments VEGATOR 632 and VEGATOR 256C.
VEGA Point Level Detection
The mulitple cable electrode VEGA EL 6 is a conductive level switch for conductive liquids.
The VEGA EL 6 level switch is suitable for use as a dry run protection system, overfill or pump control in conjunction with the signal conditioning instruments VEGATOR 632 and VEGATOR 256C.
Solutions for EMERGENCY – RESCUE – EVACUATION
Industries we serve:
Oil & Gas, Petrochemicals & Refineries, Marine Ships, Vessels, Tankers, Power & Energy, Chemicals and Pharma, Water & Waste management, Mining and Construction, Engineering and Manufacturing
Emergency and Rescue
Emergency Response Equipment, Descent and Rescue Devices, Fall Protection, Ropes-webbing-cordage, Personnel Gear, Medical Emergency equipment, Industrial and Worksite Safety Equipment
Marine and Fire Rescue Safety
Marine Rescue, Marine Search Beacons, Man Overboard Safety - Rescue - Recovery - Alert Systems - Alarms, Marine Communication and Navigation, Marine Alarms, Rescue Boats and Crafts, Fire Rescue Safety and Fire Fighter Equipment
Explosion Proof - ATEX - IECEx
Products for Hazardous Areas, Confined Spaces and Explosive Atmospheres Highest safety standard explosion proof products including Ventilation, Lighting, Pumps, Motors, Electrical Equipment, Heating, Process Instrumentation, Flame Detection, Gas Detection and Mobile Communication
For more information kindly visit us at www.fsesafe.com and for any enquiries email us at sales@fsesafe.com
Ultrasonic Level Measurement
The VEGASON 63 is an ultrasonic sensor for continuous level measurement and is an ideal solution for liquids or bulk solids.
VEGASON 63 ultrasonic level sensor's typical applications are for the continuous level measurement of liquids in open basins and storage tanks and for the continuous level measurement of bulk solids in small to medium sized vessels.
The measuring range of the VEGASON 63 ultrasonic level sensor is dependant on the dust generation and the bulk solids consistency.
A set up can be achieved without a medium as the non contact measuring principle is unaffected by product features making the VEGASON 63 suitable for application areas in all industries.
VEGASON 63 Ultrasonic Level Sensor - Advantages
Non-contact measurement
Reliable measurement independent of product features
Price-favourable solution for simple application
Cost effective, high performance Industrial tank ventilation fan
Features:
Independently dual certified to ATEX Independently dual certified to ATEX & IECEx, Integrated ATEX/IECEx starter, Mobility frame with castor wheels and lifting lugs, outlet arrangements: 500mm spigoted outlet
Specifications:
Power supply 400V 50Hz, 440V 60Hz or 690V 60Hz
Rated current/Starting Current: 400V 50Hz: 14.3A/120A, 440V 60Hz: 12.9A/122A, 690V 60Hz: 8.1A/66.4A
Painted C5 Offshore Standard or hard-wearing epoxy
Weight: 600kg
Motor: Zone 1, Ex de IIB T4 Gb, IP56 Certified to ATEX/IECEx
Starter: Zone 1, II 2 GD Ex d IIB T4, IP66 Certified to ATEX/IECEx
Performance: Maximum airflow 14,500m³/hr
Ancillary items: Heavy duty lay-flat tube ducting, Spare castor wheels
Certifications:
NON-ELECTRICAL ATEX Zone 1 Category 2G IIB T4 Certificate Number Sira 09ATEX 6230X IECEx Ex h Gb IIB T4 Certificate Number IECEx SIR17.0076X
Standards:
ISO 80079-36:2016 non-electrical equipment for explosive atmospheres ISO 80079-37:2016 non-electrical type of protection constructional safety BS EN 14986: 2017
We also supply axial fans – belt driven, axial fans – direct driven, centrifugal fans – backward bladed fans, mixed flow fans, Ventilators, Blowers, ATEX Lights, Marine Rescue Solutions, Fire Rescue Solutions, Pipe markings, Safety Signs and more
For more information visit www.fsesafe.com/portable-tank-vent-fans.php
For more information kindly visit us at www.fsesafe.com and for any enquiries email us at sales@fsesafe.com
VEGA Point Level Detection
The VEGAKON 61 is a conductive level switch for front-flush mounting in conductive liquids.
The VEGAKON 61 level switch is an instrument that is best suited as full and empty detector in pipelines.
Ultrasonic Level Measurement
The VEGASON 62 is and ultrasonic level sensor used for the measurement of liquids in open basins and bulk solids.
The VEGASON 62 is an ideal solution for the detection of liquids in solids in silos or small vessels. Set up can be achieved without a medium as the non contact measuring principle is unaffected by product features making the VEGASON 62 suitable for applications in all industries.
VEGASON 62 Ultrasonic Level Sensor - Advantages
Non-contact measurement
Reliable measurement independent of product features
Price-favourable solution for simple application
VEGA Capacitive Level Measurement Instruments
Capacitive Continuous Level Measurement
The VEGACAL 62 is a capacitive level sensor and is used for continuous level measurement in a wide range of industry applications. The partly insulated probe is ideal for the measurement of bulk solids and can also be used in non-conductive liquids such as oil.
The VEGACAL 62 has proven mechanical construction which ensures high functional safety.
VEGACAL 62 Capacitive Level Sensor - Advantages
Long lifetime and low maintenance requirement through robust mechanical construction
High flexibility through shortenable probe
Maximum use of the vessel, because measurement over the complete probe length
VEGA Point Level Detection
The VEGACAP 98 is a level switch for liquids and bulk solids which is adjustment-free. VEGACAP 98 level switch works in products with a dielectric figure from 1.5.
Dry run protection for adhesive and conductive products and overfill protection are typically suitable for use with the VEGACAP 98.
Designed for use in hazardous and challenging environments
Rugged Design
Superior Image Quality
Flexible Surveillance Solution
Easy to Install and Use
These cameras are ideally suited for oil and gas onshore, offshore, marine, and heavy industrial applications, as well as dusty environments such as those found in the paper and textile industry.
Certifications:
ATEX, IECEx, CNEx, MA certified
ISO9001, ISO14001, ISO45001
Group I (mines), zone 1, 2, zone 21, 22
Products:
ATEX Explosion Proof PTZ High Speed Dome Camera, ATEX Explosion Proof PTZ Camera, Explosion Proof PTZ Dome IR Camera, Explosion Proof PTZ Thermal Camera, Fixed ATEX Explosion Proof Infrared Camera With Wiper, Fixed ATEX Explosion Proof Camera, Explosion Proof Fish-Eye Dome Camera, Explosion Proof Infrared Camera / Infrared Lights, Explosion Proof Pan Tilt, Air Water Cooling Explosion Proof Camera, Explosion Proof Camera Housing with Wiper, Explosion Proof Washing Tank, Explosion Proof Monitor - Controller - Junction Box
For more information visit fsesafe.com/ex-proof-products/explosion-proof-cctv-and-su...
For more information kindly visit us at www.fsesafe.com and for any enquiries email us at sales@fsesafe.com
VEGA Point Level Detection
The VEGAKON 66 is a conductive level switch for conductive liquids. The
VEGAKON 66 level switch is an instrument that is best suited as full and empty detector in pipelines.
Perfect for lighting a broad area
Powerful 370 Lumens
400-meter beam
High powered LED
Wide angled flood beam
Cree XP-G3 LEDS
Removeable shoulder strap
Unique deep-dish reflector
State of the art optics and reflector ensure a bright even spread of light
Lithium-ion battery provides up to 30 hours running time
Durable impact resistant, drop proof up to 1m
Gas pressure release valve
Wall mountable charging base
Certifications:
Class I DIV 1 & 2 GRP ABCD TEMP CODE: T4 IP64
GAS: Ex II 1G EX IA OP IIC T4 GA (Zone 0) MINING: EX I M1 EX IA I MA Sira 17 ATEX2195X
IECEx: GAS: Ex ia op is IIC T4 Ga (Zone 0) MINING: Ex ia Ma
IECEx SIR 17.0042X
For more information visit www.fsesafe.com/ATEX-Ex-Rechargeable-Hand-Lamps.php
We also supply Explosion Proof Lighting for Confined Spaces, Hazardous Areas and Explosive Atmosphere, Portable Ex-Floodlight and Ex-Linear, Ex-Floodlight, Ex-Luminaires, Ex-Bay Lights, Ex-Bulk Heads, Ex-Crane Deck Lighting, Handlamps, Torches, Headlamps, Search Lights and Flashlights
For more information kindly visit us at www.fsesafe.com and for any enquiries email us at sales@fsesafe.com
VEGA Point Level Detection
The VEGACAP 66 ia a capacitive level switch with a fully insulated probe aidinf the measurement of liquids as well as bulk solids for use in all industries.
VEGACAP 66 capacitive level switch has a proven construction which ensures high functional safety.
explosion proof lighting,ex proof led lights,led explosion-proof high bay lighting,atex ex proof light,iecex ex proof flood light,explosion proof fluorescent lighting fixture ip65,5050 smd led light,high quality led explosion proof light,water proof explosion lamps
explosion proof lighting,ex proof led lights,led explosion-proof high bay lighting,atex ex proof light,iecex ex proof flood light,explosion proof fluorescent lighting fixture ip65,5050 smd led light,high quality led explosion proof light,water proof explosion lamps
Appleton’s iM-Line multi-pin connectors are designed for heavy-duty and hazardous locations up to 600 Vac/Vdc. Designed to safely connect and disconnect power, control and instrumentation equipment, M-Line connectors help industrial facilities achieve increased operational flexibility and productivity and are available in two versions: The MEP Series is purpose-engineered for hazardous ATEX/IECEx locations while the MN Series brings M-Line advantages to heavy-duty but non-hazardous environments.
VEGA Point Level Detection
The VEGACAP 65 is a capacitive level switch which is used in non- conductive liquids for example oil and the partially insulated probe makes it ideal also for the measuremnt of bulk solids.
VEGACAP 65 capacitive level switch has a proven construction which ensures high functional safety.
explosion proof lighting,ex proof led lights,led explosion-proof high bay lighting,atex ex proof light,iecex ex proof flood light,explosion proof fluorescent lighting fixture ip65,5050 smd led light,high quality led explosion proof light,water proof explosion lamps
Ultrasonic Level Measurement
The VEGASON 64 is an ultrasonic level sensor for continuous level measurement of bulk solids in applications in bunkers or silos. The VEGASON 64 is easy to set up and is versatile with a range mounting possibilities.
The measuring range of the VEGASON 64 ultrasonic level sensor is dependant on the dust generation and the bulk solids consistency.
VEGASON 64 Ultrasonic Level Sensor - Advantages
Non-contact measurement
Reliable measurement independent of product features
Price-favourable solution for simple application
FSE SAFE (HQ) Singapore and offices worldwide for worldwide project supplies.
FSE supplies ATEX Ex Products, Emergency & Rescue, Marine & Fire Rescue and Industrial Safety.
Industries we supply to include Oil & Gas, Petrochemicals & Refineries, Marine Ships, Vessels, Tankers, Power & Energy, Chemical & Pharma, Water & Waste management, Mining & Construction, Engineering & Manufacturing.
Explosion Proof - ATEX - IECEx Products for Hazardous Areas, Confined Spaces and Explosive Atmospheres
Emergency & Rescue
Industrial Safety
Fire Rescue and Fire Fighter Safety
Marine Safety and Man Overboard Rescue
Visit - www.fsesafe.com
SOLITRAC 31 - Radiation Based Level Measurement
SOLITRAC 31 is a level sensor that uses a radiation based sensor with a PVT rod detector for continuous measurement of bulk solids and liquids.
The SOLITRAC 31 radiation based sensor is ideal for use with aggressive products and critical product features as it is able to measure under extreme process conditions.
SOLITRAC 31 Radiation Based Level Measurement - Advantages
High plant availability through non-contact management
Best measurement performance through PVT detector with maximium sensitiviy
Simple mounting through supplied accessory
Zone 0 Explosion Proof Lighting
ATEX, IECEx and TIIS Certified
T4 Classification and have been approved and certified as intrinsically safe by Test Safe Australia meeting the IECEx standards, Intertek UK meeting the ATEX standards, and TIIS conforming to Japanese standards.
The Compliance to these certifications ensures that EXIN LIGHT’s EX90L range is suitable and safe in areas where flammable gases and combustible dusts are present, providing your requirement is within the certified classification of the selected model.
Body: The EX 90 body is constructed using an automotive resin type ABS 747 making EXIN Light highly durable for use in mining, oil rigs and in industries where there could be flammable gas or another potentially explosive atmosphere.
Shock absorbing rubber on both the base and lid provides added protection.
Battery: Encapsulated Ni-MH battery. Maintenance free and is only to be charged in accordance with the instructions provided.
Available models: EX90L T4 IIB 720 DS, EX90L T4 IIB 1440 SS, EX90L T4 IIC 720 SS
For more information visit www.fsesafe.com/Ex-LED-Portable-Lighting.php
For more information kindly visit us at www.fsesafe.com and for any enquiries email us at sales@fsesafe.com
VEGA Point Level Detection
The VEGACAP 67 is a capacitive level switch that can be used universally for bulk solids.
The VEGACAP 67 capacitive level switch has a probe which is designed for high temperature applications.
VEGA Point Level Detection
The POINTRAC 31 is a radiation-based sensor for universal level detection of liquids and bulk solids.
POINTRAC 31 radiation based sensor reliably monitors the limit level in vessels regardless of mounting location and therefore is suitable for applications in all industries.
Due to the high sensitivity POINTRAC 31 is an economical solution with minimum radiation activity.
explosion proof lighting,ex proof led lights,led explosion-proof high bay lighting,atex ex proof light,iecex ex proof flood light,explosion proof fluorescent lighting fixture ip65,5050 smd led light,high quality led explosion proof light,water proof explosion lamps
explosion proof lighting,ex proof led lights,led explosion-proof high bay lighting,atex ex proof light,iecex ex proof flood light,explosion proof fluorescent lighting fixture ip65,5050 smd led light,high quality led explosion proof light,water proof explosion lamps
VEGA Point Level Detection
The rod electrode VEGA EL 8 is a conductive level switch for conductive liquids.
The VEGA EL 8 level switch is suitable for use as a dry run protection system or overfill in conjunction with the signal conditioning instruments VEGATOR 632 and VEGATOR 256C.
explosion proof lighting,ex proof led lights,led explosion-proof high bay lighting,atex ex proof light,iecex ex proof flood light,explosion proof fluorescent lighting fixture ip65,5050 smd led light,high quality led explosion proof light,water proof explosion lamps
High efficiency LED source
ATEX and IECEx certified
Robust aluminium housing
Vibration and shock resistant
Tempered glass that can stand 7J impact
Stainless steel fasteners
Epoxy powder coating
Weight 6.5 kg (Magnetic) / 5.2 kg (Bracket)
Luminaire efficiency: 136.5 lm / W
Lifespan: >50,000 hours
Battery: Lithium
Battery level indicator
Charge voltage: 100-277 VAC / 141-392 VDC
Low maintenance
Models Available: 10W ExFLR-10W and 15W-ExFLR-15W
Applications: Oil and gas exploration, drilling, oil refinery, petrochemical plant, power plant and pharmaceutical plant
We also supply rechargeable portable hazardous area lighting, confined space Ex-lighting and professional handheld and cap attached torches for hazardous area.
For more information kindly visit us at www.fsesafe.com and for any enquiries email us at sales@fsesafe.com
VEGA Point Level Detection
The VEGACAP 69 is a capacitive level switch for continuous level measurement of liquids in non-conductive vessels or of corrosive liquids.
VEGACAP 69 capacitive level switch has a double rod probe which is highly resistant and fully insulated.
The rod electrode VEGA EL 4 is a conductive level switch for conductive liquids.
The VEGA EL 4 level switch is suitable for use as a dry run protection system, overfill or pump control in conjunction with the signal conditioning instruments VEGATOR 632 and VEGATOR 256C.
Xcorder EX4000: A highly rugged, high end Intrinsically safe, waterproof digital camera and camcorder, ATEX approved and IECex certified. Featuring the high end imaging features found in the Xcaster without the wireless communication capabilities, enabling a lower price.
Professional features in a pocket-sized package
TOUGHPIX DIGITHERM TP3rEX Digital and Thermal camera is manufactured from light weight aircraft grade aluminum weighing only 380 grams
Features:
ATEX and IECEx Certified Digital Camera
Adaptive thermal blending define the temperature at which ATB enabled tool to begin blending
5-megapixel digital camera with automated, motorized focus helps to take high-resolution visual images
Waterproof Ultrabright LED flashlight
Lightweight but strong weighs aircraft-grade aluminum in at less than 400grams
Easy to download images via the CorDEX CONNECT Mobile app to your tablet or smartphone.
Rechargeable removable battery
High Power LED flash for low light imaging
CorDEX EMA, DIGITHERM can measure from -10C to +380C.
Slim, Sleek and rugged compact design
Alarm triggered recording
Soft-touch buttons for ease of use
Nevermore out of memory due to removable CorDEX Memory card
Motorized optical focus
Specification:
Ambient Temperature: -10C to +40C
Image Storage: 8G4
Standard Image Capture Resolution: 5 Megapixel
Screen Size: 2.8 inches
Lens and LCD material: Armored Glass
Weight: 380g
Body Material: Anodized aluminum with polymeric materials
Battery Type: Rechargeable & Removable
Capacity: 1900mAh
Cell Type: Lithium-Ion
For more information visit fsesafe.com/ex-proof-products/explosion-proof-digital-cam...
For more information kindly visit us at www.fsesafe.com and for any enquiries email us at sales@fsesafe.com
Perfect for lighting a broad area
Powerful 370 Lumens
400-meter beam
High powered LED
Wide angled flood beam
Cree XP-G3 LEDS
Removeable shoulder strap
Unique deep-dish reflector
State of the art optics and reflector ensure a bright even spread of light
Lithium-ion battery provides up to 30 hours running time
Durable impact resistant, drop proof up to 1m
Gas pressure release valve
Wall mountable charging base
Certifications:
Class I DIV 1 & 2 GRP ABCD TEMP CODE: T4 IP64
GAS: Ex II 1G EX IA OP IIC T4 GA (Zone 0) MINING: EX I M1 EX IA I MA Sira 17 ATEX2195X
IECEx: GAS: Ex ia op is IIC T4 Ga (Zone 0) MINING: Ex ia Ma
IECEx SIR 17.0042X
For more information visit www.fsesafe.com/ATEX-Ex-Rechargeable-Hand-Lamps.php
For more information kindly visit us at www.fsesafe.com and for any enquiries email us at sales@fsesafe.com