View allAll Photos Tagged Device
This is a photograph from the 1st running of the Carbury GAA 10KM Run which was held in Derrinturn, Carbury, Co. Kildare, Ireland on Sunday 28th July 2013 at 12:00. The race was organised by the GAA club and sponsored by various businesses in the locality. The race was very well organised with excellent stewarding and support. Well done to everyone involved.
Electronic Timing and Event Management were provided by Precision Timing [www.precisiontiming.net/result/racetimer]
Viewing this on a smartphone device?
If you are viewing this Flickr set on a smartphone and you want to see the larger version(s) of this photograph then: scroll down to the bottom of this description under the photograph and click the "View info about this photo..." link. You will be brought to a new page and you should click the link "View All Sizes".
Overall Race Summary
Participants: There was about 60 participants
Weather: There was hot July sunshine for the duration of the race. There was little or no breeze.
Course: The race starts and finishes at Carbury GAA clubhouse. The race starts and heads southwards along the Sli na Slainte to the main Edenderry Road (R403) at Windmill Cross and proceeds along 'The Back Road' to the Grand Canal at Ticknevin Bridge where the course turns sharply and back to head northwards along the Bog Road to meet the R403 again. Finally for the last 2 KM the race passes through the westerly end of Derrinturn village before following the road to Carbury GAA for the finish. Overall the route is reasonably flat with the only significant rise at the Canal bridge near 5KM.
Location Map: Start/finish and registration takes place at Carbury GAA (see this Google Streetview Location for directions goo.gl/maps/3P18U)
Refreshments: There was a very impressive selection of refreshments including soup and sandwiches in the GAA Clubhouse afterwards.
Some Useful Links
The Carbury GAA 10KM 2013 Race Route: www.endomondo.com/routes/206214909
Start, finish, and registration: goo.gl/maps/3P18U (Google Satellite View)
Race results for 2013 will be available at: www.precisiontiming.net/result/racetimer
Pictures of Carbury's famous Castle (www.flickr.com/photos/64422062@N04/8024181883/, www.flickr.com/photos/mickoreilly/4269932957/, www.flickr.com/photos/peterm7/8671658169/)
Carbury Wikipedia Page: en.wikipedia.org/wiki/Carbury
How can I get a full resolution copy of these photographs?
All of the photographs here on this Flickr set have a visible watermark embedded in them. All of the photographs posted here on this Flickr set are available offline, free, at no cost, at full image resolution WITHOUT watermark. We take these photographs as a hobby and as a contribution to the running community in Ireland. Our only "cost" is our request that if you are using these images: (1) on social media sites such as Facebook, Tumblr, Pinterest, Twitter,LinkedIn, Google+, etc or (2) other websites, web multimedia, commercial/promotional material that you provide a link back to our Flickr page to attribute us. This also extends the use of these images for Facebook profile pictures. In these cases please make a separate wall or blog post with a link to our Flickr page. If you do not know how this should be done for Facebook or other social media please email us and we will be happy to help suggest how to link to us.
Please email petermooney78 AT gmail DOT com with the links to the photographs you would like to obtain a full resolution copy of. We also ask race organisers, media, etc to ask for permission before use of our images for flyers, posters, etc. We reserve the right to refuse a request.
In summary please remember - all we ask is for you to link back to our Flickr set or Flickr pages. Taking the photographs and preparing them for online posting does take a significant effort. We are not posting photographs to Flickr for commercial reasons. If you really like what we do please spread the link around your social media, send us an email, leave a comment beside the photographs, send us a Flickr email, etc.
If you would like to contribute something for your photograph(s)?
Many people offer payment for our photographs. As stated above we do not charge for these photographs. We take these photographs as our contribution to the running community in Ireland. If you feel that the photograph(s) you request are good enough that you would consider paying for their purchase from other photographic providers we would suggest that you can provide a donation to any of the great charities in Ireland who do work for Cancer Care or Cancer Research in Ireland.
I ran in the race - but my photograph doesn't appear here in your Flickr set! What gives?
As mentioned above we take these photographs as a hobby and as a voluntary contribution to the running community in Ireland. Very often we have actually ran in the same race and then switched to photographer mode after we finished the race. Consequently, we feel that we have no obligations to capture a photograph of every participant in the race. However, we do try our very best to capture as many participants as possible. But this is sometimes not possible for a variety of reasons:
►You were hidden behind another participant as you passed our camera
►Weather or lighting conditions meant that we had some photographs with blurry content which we did not upload to our Flickr set
►There were too many people - some races attract thousands of participants and as amateur photographs we cannot hope to capture photographs of everyone
►We simply missed you - sorry about that - we did our best!
You can email us petermooney78 AT gmail DOT com to enquire if we have a photograph of you which didn't make the final Flickr selection for the race. But we cannot promise that there will be photograph there. As alternatives we advise you to contact the race organisers to enquire if there were (1) other photographs taking photographs at the race event or if (2) there were professional commercial sports photographers taking photographs which might have some photographs of you available for purchase. You might find some links for further information above.
Don't like your photograph here?
That's OK! We understand!
If, for any reason, you are not happy or comfortable with your picture appearing here in this photoset on Flickr then please email us at petermooney78 AT gmail DOT com and we will remove it as soon as possible. We give careful consideration to each photograph before uploading.
I want to tell people about these great photographs!
Great! Thank you! The best link to spread the word around is probably www.flickr.com/peterm7/sets
SRI LANKA TRAVEL
We are the best Sri lankan tour operators here in colombo. If you are looking for an amazing travel experience in Sri Lanka. We can make sure This is your one stop online travel shop. find and book your perfect holiday.
Call Now - +94 77 30 21 739 (WhatsApp)
Email – holidaylankaoffice@gmail.com
Device model: NIKON D90
Colour space: RGB
Colour profile: Camera RGB Profile
Focal length: 48
F number: 9
Exposure time: 1/320
Comments will be highly appreciated.
The global electroencephalography devices market was valued at US$ 1.2 Bn in 2019, and is expected to exhibit a CAGR of nearly 7% during the forecast period (2020–2030).
www.techwinspd.com/products/signal-spd/
Signal surge protective device (SPD) is actually a signal lightning arrester, which is installed in series in the signal transmission line, usually at the front end of the equipment, to protect the subsequent equipment-all kinds of signal lines and equipment, and prevent lightning waves from influencing the signal line and damaging the equipment.
Its main functions are:
Limit the transient overvoltage caused by the induced lightning in the signal line. According to surveys, more than 80% of lightning strikes in electronic systems are caused by induced lightning. Therefore, the wide application of microelectronic equipment in modern society should strengthen the lightning protection of electronic systems and install suitable signal surge protectors.
Limit the surge caused by the start and stop of the electronic system. In addition to the lightning induction caused by the surge in the signal line, the most important reason is the start and stop of the electronic equipment. This kind of surge is widespread. The installation of a suitable signal surge protector on the line can effectively suppress the surge caused by the operation of the electronic system, and can effectively reduce the deterioration and failure of electronic sensitive components, and ensure the signal line The stability, prolong the service life of electronic equipment.
Signal surge protectors can be divided into network signal surge protectors, monitoring signal surge protectors, control signal surge protectors, video signal surge protectors, telephone signal surge protectors according to different types of protected lines, Explosion-proof signal surge protectors,s and many other types, each type has many models, parameters and different appearances.
SPD for Network / Data Line Surge Protector
Data line protector series are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced...
SPD for Audio Surge Protector
With a standard RJ11 interface, The audio signal lightning protection device is suitable for audio signal lightning protection of 1 to 4 pairs of dedicated communication lines and protection of trunk lines and internal lines of program-controlled exchanges.
SPD for Video Signal System
Come With BNC interface, video signal lightning protection device is suitable for monitoring systems and video-on-demand equivalents Axis communication equipment.
Industrial Control Line AI/AO Analog signal RS485 Protector
The control signal lightning protection device is designed to protect the control line system to protect the electrical and electronic equipment's signal line from the impact of the lightning electromagnetic pulse.
SPD for Ethernet Power System
The POE Ethernet series lightning protection device is a lightning protection device developed for POE network power supply equipment in accordance with the standard requirements of IEC61643-21, EN61643-11:2012, YD5075-98, and IEEE802.3AT.
SPD for Serial Signal System
The serial port signal lightning protection device is designed for communication network line not to be spoiled by lightning over-voltage, induce a voltage, and static discharge.
2 in 1 SPD for CCTV
2 in 1 monitor lightning arrester (power and network/ power and video/ power and control), is designed for a digital camera to protect the camera power and data line/power line/video line from the impulse of lightning electromagnetic pulse, induced over-voltage, operating over-voltage.
3 in 1 SPD for CCTV
3 in 1 monitoring surge protector is designed to protect the analog monitoring equipment ( power, data, control, video) from the damage of lightning electromagnetic pulse, induced over-voltage, operating over-voltage.
Explosion-Proof Signal Lightning Surge Protector
Explosion-proof signal lightning protector is designed for protecting instruments of 2line, 3 lines, 4 lines, from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation and resonance over-voltage, transient operation, and resonance overvoltage.
Pictures frome: Monktailfest: Flotation Device Live with Lori Goldston, Syrinx Effect, Heaney/Henneman/Rea Guitar Threesome
POWFOX BOX3. PowFox - power your smartphone! Make your guests happy and provide them a special service: a device to charge their smartphone -> the PowFox box! www.powfox.com info@powfox.com www.facebook.com/... www.instagram.com... www.twitter.com/... powfox.tumblr.com #powfox #power #your #smartphone #charge #box #cellular #battery #charger #cellphone #from #munich #made #in #germany #innovation #order #now #gastronomy #bar #restaurant #coffeshop #gym #hairdresser #beachclub #loft @PowFox
This device is for register any movements in surrounding buildings, every 15 second... When digging a tunnel under the city... 😬
Alex Dubois from Kimpex, Stéphane Dion from Dion Device and Jimmy Mathieu from Kimpex. Our meeting at the Laguna Seca MotoGP --- Notre rencontre au MotoGP à Laguna Seca
The pedal of EQD uses such all beautiful fonts. To improve externals though it is trifling, a large contribution is done.
los angeles, california
august 1958
goe engineering company
&
audio devices rectifier division
western electronic show and convention (wescon) '58
part of an archival project, featuring the photographs of nick dewolf
© the Nick DeWolf Foundation
Image-use requests are welcome via flickrmail or nickdewolfphotoarchive [at] gmail [dot] com
Directed by David Toop, 'Unknown Devices: The Laptop Orchestra' is an improvising ensemble of students and alumni from London College of Communication. For their performance at the Speaking Out symposium, Unknown Devices are performing a selection of text based compositions, including works by Mieko Shiomi, Bob Cobbing, John Stevens and David Toop.
In the picture: Luciana Bass, Johnny, Russell Callow
photo: Lucas Levitan
MONTREAL, QUE.: August 10, 2013-- Device perform during first day of the 2013 HeavyMTL festival at Parc Jean Drapeau in Montreal on Saturday August 10, 2013. (Tim Snow / evenko)
This is found in the industrial area in Calgary Alberta. Posted on my Urban HDR Blog - www.urbanhdr.com
DJ mix device. It hase two holes for oPhone. When docked, oPhone automaiclz become pluged in through USB, and change informations with dock. Dock i sclassic mixer for audio, with audio controls and big buttons for faster music control. When plugged, oPhome switch to audio player automaticly, disabling other applications, including phone function, so teher is no posibility for unespected calls during DJ set.
Audio player application has a scratch function.
Listening and Viewing Device, artwork by Andrew Drummond
Wellington Botanic Garden ki Paekākā
location: Wellington, New Zealand
author: Jan Helebrant
license CC0 Public Domain Dedication
Woman caught boyfriend in bed with his cousin after using tracking device worldentertainmentscenter.com/woman-caught-boyfriend-in-b...
Android Product Manager, the support that can help you secure and find dropped products, is buying an update up and for Android that provides better choices to you when securing a tool. Today from the Android application and also both internet, whenever you visit intentionally secure a...
mobiapps.club/android-device-manager-adds-message-and-cal...
John Stevely demonstrates descending techniques to improve survival of grouper and other Gulf of Mexico reef fish. Photo Credit Bryan Fleuch
CPU : AMD Athlon™ 64 3200+ Processor (512KB L2 cache, 2.2GHz, 1600MHz FSB)
Chipset : ATI RS480 Memory : 1GB DDR (400MHz)
Expandable to 2GB Hard Drive : 160GB Optical Drive : 16x DVD±RW multi-format double layer Media Reader : 8-in-1 digital media manager
Secure Digital™ (SD), Smart Media, Compact Flash, Micro Drive, Memory Stick®, Memory Stick PRO, Multimedia Card, USB 2.0 Video : ATI Radeon™® Xpress 200 (PCI-Express® )
128MB DDR shared video memory Sound : AC '97 audio, Dolby 5.1 (6-channel) Network : 10/100Mbps Integrated Ethernet LAN Modem : 56K ITU V.92-ready Fax/Modem Peripherals : Standard multimedia keyboard, 2-Button wheel mouse, amplified stereo speakers Ports/Other : 7 USB 2.0 (2 in front; 4 in back; 1 in Media Reader), 1 IEEE 1394 port (in back), 1 VGA external connector, 1 Parallel, 2 PS/2 (keyboard and mouse)
Details I read from the motherboard:
Emachines T6410
RS480M
ATI XP400 SB400
MS-7145b0506017334
The Proliner® 6 is an advanced model in the Proliner’s range. The Proliner® 6 is available in a 2D and 3D version.
______________________________
Proliner® 6 2D
The Proliner® 6 2D measures only in 2D. The Proliner® has optimal power flexibility because it runs on rechargeable batteries as well as a socket connection for endless use. The length of the wire is 5 meter with a diameter of 10 meter which can be extended with optional software. The beep-volume is adjustable for noisy working environments. It is a totally self contained unit with a measuring head that can be folded to the inside for optimal protection during transport. The total weight is only 10 kg. The top of the Proliner® provides a storage box for different items, like the remote control and scanners. The Proliner® 6 is equipped with easy CAD software with basic functionalities to finish your drawings on the job site. The direct output is in DXF, CCD and TXT which can be downloaded on a USB stick through the USB port on the Proliner®. Now you can immediately start your digitizing process. The screen size is 6.5”.
______________________________
Proliner® 6 3D
With the Proliner® 6 3D creates 3D as well as 2D drawings. It runs on batteries and has a socket connection. The measuring head can fold inside. It has a storage box, weighs 10 kg and has basic CAD functionalities. Output is possible in lines & arcs, 2D or 3D polylines and in DXF, CCD and TXT formats, downloadable on USB stick. Screen size is 6,5”.
www.hx-technology.com/pcba-medical-device/
Almost every medical equipment requires a fully assembled medical circuit board. Ultrasonic therapy equipment and blood pressure monitors are a few examples of standard medical equipment, and all of them count on PCBs to kick in. HX technology aims to provide multiple high-quality medical device products, including ultrasound machine PCB, endoscope PCB and glucometer PCB board.
The trend of PCB Medical Industry
The medical field is not like it used to be. Advances in technology have revolutionized the industry. This change is even more evident in electronic diagnostic, research, and treatment systems and tools. Every day, several complex electronic devices and instruments are introduced to simplify various medical procedures. This growth has largely benefited the PCB industry because, without PCB, new inventions would not be impossible. To meet the ever-changing needs of medical device and diagnostic machine manufacturers, today's PCB manufacturers are manufacturing extremely simple parts into highly complex printed circuit boards in PCB medical industry. Using specialized high-speed laminates, copper and aluminum substrates, ceramics, and coatings, PCB manufacturers can make these boards best suited for medical industry applications.
Applications of PCB for Medical Industry
With the development of medical technology, more and more medical diagnostic, research and treatment have advanced, which need computer-aided. It means that medical devices and equipment must have a high level and high precise standard of medical PCB. Therefore, medical PCBA has become more important in medical fields, which is the PCB meaning in medical.
The rapid progress of medical science today is closely related to the development of the electronics industry. A lot of microbiological equipment and other instruments are individually based PCB, such as pH meter, heartbeat sensor, temperature measurement, ECG machine, EEG machine, MRI machine, X-ray, CT scan, blood pressure machine, blood glucose level measurement equipment, incubator, and some other medical equipment.
Custom Medical PCB Assembly
Customization of medical PCB assembly is the trend today. The medical industry has chosen the same approach when it comes to PCB. Customers can provide the correct specifications with the full form of PCB in medical for board size in X-direction, board size in Y-direction, total number of holes, minimum alignment and pitch size in inches, board material, number of layers, surface coating, etc. Therefore, the manufacturer will work according to the given specifications and deliver the right product for your application.
Other PCB Assembly Applications
Riverge Presents
“Cross Breed Device Beat Vol7” at アメリカ村 CLAPPER - Osaka
Ada†Max（名古屋）
Darge （岐阜）
Doraid （東京)
Hell and Hell（名古屋）
Riverge (大阪)
_______________________________________________________________
....::::Observations
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
If you use the photo, please give the proper credit:
Photo by Rafael Yaekashi
The photos are with 30% of the original size, I have all with actual size, and
without a signature, if someone needs is just send me an email.
Any use of the photos in the business circles without my permission, is prohibited.
For more information please contact me.
______________________________________________________________