View allAll Photos Tagged CreativeTools
We designed this castle playset as a concept for demonstrating toy manufacturing at home using a 3D printer.
You can download all STL files free of charge and read more about the project at 3DCastlePlayset.creativetools.se.
VIDEO:
Denna video visar uppackningen och demonstration av en MakerBot Replicator personliga FDM 3D-skrivare.
Vi är svenska återförsäljare av personliga 3D-skrivare. Kontakta info@creativetools.se eller 035-77 77 880 för mer information.
---
This video shows the unboxing, setup and a short demonstration of the MakerBot Replicator personal 3D printer.
We are Swedish resellers of MakerBot. (info@creativetools.se / +46 35-77 77 880)
A 3D printable grip and lens cover for the ASUS XTION motion sensing hardware which is very affordable and popularly used as a hand-held 3D scanner.
- www.thingiverse.com/thing:126936
- www.instructables.com/id/EI6NW7FHPWBYIDB/
The 3D scanner: bit.ly/1bBmlMq
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:126936
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
A fully 3D-printable rotating stand for filament spools, designed to be easily made without the need for fasteners such as screws, nuts, shafts, glue, etc. Every single component in this spool holder comes right from your 3D printer's filament.
The spool holder's spindle is shaped to fit the vast majority of commonly used filament spools with shaft holes ranging from 16 mm to 62 mm in diameter. It is also compatible with spool-less filament coils.
The spindle which holds the spool's weight rotates on its own roller wheels, which makes it turn effortlessly.
The spool holder included an arm for filament guide tubes of both common sizes 1.75 mm and 3.0 mm. The arm also contains a pocket for inserting a piece of sponge which acts a a filament filter - thus keeping the filament clean and lubricated.
FEATURES
- Easy to 3D print
- Needs no glue or fasteners
- All parts can be 3D-printed
- Fits almost any filament spool size
- Has built-in filament filter!
- Can also hold spool-less filament coils
Next time you need a new filament spool holder, just 3D-print one! :)
INSTRUCTIONS
Please see video youtu.be/X6ArZeWYSZE
"Creative Tools
We designed this castle playset as a concept for demonstrating toy manufacturing at home using a 3D printer.
You can download all STL files free of charge and read more about the project at 3DCastlePlayset.creativetools.se.
VIDEO:
SVENSKA
Dessa bilder visar hur ett plastmynt med vår logotyp skapades med hjälp av en ZPrinter 3D-skrivare från Z Corporation. Först skapades myntet och gjutformen i Rhino 3D. Därefter printade 3D-printern en gjutform i gips som härdades snabbt med CA-lim. Några minuter senare kunde flera mynt i plast formsprutas i den 3D-utskrivna formen!
ENGLISH
These images show how a plastic coin with our logo was made with the help of a ZPrinter 3D-printer form Z Corporation. First the model and the mold was made in Rhino 3D. Then we 3D-printed the mold with our ZPrinter 650 and hardened it with CA-glue. Some minutes later we could produce several plastic coins with our desktop injection molding machine.
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
A fully 3D-printable rotating stand for filament spools, designed to be easily made without the need for fasteners such as screws, nuts, shafts, glue, etc. Every single component in this spool holder comes right from your 3D printer's filament.
The spool holder's spindle is shaped to fit the vast majority of commonly used filament spools with shaft holes ranging from 16 mm to 62 mm in diameter. It is also compatible with spool-less filament coils.
The spindle which holds the spool's weight rotates on its own roller wheels, which makes it turn effortlessly.
The spool holder included an arm for filament guide tubes of both common sizes 1.75 mm and 3.0 mm. The arm also contains a pocket for inserting a piece of sponge which acts a a filament filter - thus keeping the filament clean and lubricated.
FEATURES
- Easy to 3D print
- Needs no glue or fasteners
- All parts can be 3D-printed
- Fits almost any filament spool size
- Has built-in filament filter!
- Can also hold spool-less filament coils
Next time you need a new filament spool holder, just 3D-print one! :)
INSTRUCTIONS
Please see video youtu.be/X6ArZeWYSZE
"Creative Tools
ENGLISH
Casing for MakerBot Replicator 1 3d printer.
Keeps you 3d prints in a controlled temperature environment.
As a kit.
Easily assembled in 10min.
Make your own?
Download the files from: www.thingiverse.com/thing:38187
Get one made?
www.creativetools.se/casing-for-makerbot-replicator-1-3d-...
SVENSKA
Huv för MakerBoot Replicator 1 3d-skrivare.
Håller dina 3d utskrifter i
en kontrollerad varm miljö.
Leveras som en byggsats som enkeklt kan monteras på 10 minuter.
Gör en själv?
Ladda hem filerna från: www.thingiverse.com/thing:38187
Skaffa en färdig?
www.creativetools.se/plexiglashuv-for-makerbot-replicator...
ENGLISH
This video shows a scale model (125 x 125 mm) of a cityscape 3D modelled by Munson3D.com. The CAD file was 3D printed in color on a ZPrinter 3D printer from Z Corporation.
SWEDISH
Denna video visar en skalmodell (15 x15 mm) av en stad i 3D som modellerades av Munson3D.com. CAD-filen 3D-printades på en ZPrinter 3D-skrivare från Z Corporaiton.
This image is part of a project from Computer Graphics Design in Gothenburg. It depicts a 3D printed scale model of a decorated Gothenburg tram.
The model was made by Sebastian Hornbaek and Veronica Kristiansen, and was 3D printed on a ZPrinter 650.
This small device traps dust in a small sponge before it enters the extruder. In some cases it can also be used to easily lubricate the filament just before it is extruded.
The adapter is designed to fit the Replicator (1) and Replicator 2 extruders.
Protecting your 3D printer's extruder from foreign particles is an important part of keeping the machine maintenance-free. This adapter makes it easy to keep the filament clean.
1 - Download the STL file
2 - 3D print it as is with standard medium or fine settings
3 - Cut two small pieces of sponge and place them into the filter case
4 - Close the case with the lid and two standard 3 mm screws
5 - Unload the filament from your Replicator 1 or 2
6 - Remove the filament guide tube
7 - Insert the loose end of the filament into the adapter.
8 - Make sure that it passes through the sponge and slides smoothly
9 - Insert the adapter into the Replicator's extruder hole
10 - Insert the filament guide tube into the top part of the adapter
11 - Enjoy hours and hours of dust-free 3D print extrusion
Check this Youtube video for more information:
Every now and then open the adapter and check the sponge for dust. Replace if necessary.
In some cases filament can jam or cause uneven 3D prints if the friction in the extruder's filament tube is too high. This adapter can also be used to lubricate the filament just before it enters the extruder.
creativetools.se/makerbot-replicator-1-2-filament-dust-filter
English
Image of a Arla milk carton taken with a PackshotCreator photo studio by Creative Tools AB.
Swedish
Produktbild av ett paket Arla mjölk tagen med en PackshotCreator fotostudio av Creative Tools AB.
The 3D printer: makerbot.creativetools.se
The 3D file: www.thingiverse.com/thing:136589
Get it at: bit.ly/16bncdX
English
Image of a metal box with a lock taken with a PackshotCreator photo studio by Creative Tools AB.
Swedish
Produktbild av metallåda med lås tagen med en PackshotCreator fotostudio av Creative Tools AB.
A 3D printable grip and lens cover for the ASUS XTION motion sensing hardware which is very affordable and popularly used as a hand-held 3D scanner.
- www.thingiverse.com/thing:126936
- www.instructables.com/id/EI6NW7FHPWBYIDB/
The 3D scanner: bit.ly/1bBmlMq
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:126936
SVENSKA
Dessa bilder visar hur ett plastmynt med vår logotyp skapades med hjälp av en ZPrinter 3D-skrivare från Z Corporation. Först skapades myntet och gjutformen i Rhino 3D. Därefter printade 3D-printern en gjutform i gips som härdades snabbt med CA-lim. Några minuter senare kunde flera mynt i plast formsprutas i den 3D-utskrivna formen!
ENGLISH
These images show how a plastic coin with our logo was made with the help of a ZPrinter 3D-printer form Z Corporation. First the model and the mold was made in Rhino 3D. Then we 3D-printed the mold with our ZPrinter 650 and hardened it with CA-glue. Some minutes later we could produce several plastic coins with our desktop injection molding machine.
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
The sturdy Flashforge Dreamer FFF type 3D printer with dual print heads. Loopable clip. Duration 52 s, no audio.
For more information please visit flashforge.creativetools.se
English
3D model of a ball bearing 3D printed on a ZPrinter. Image is taken with a PackshotCreator photo studio by Creative Tools AB.
Swedish
3D-modell av ett kullager 3D-utskriven på en ZPrinter. Bilden är fotograferad med en PackshotCreator fotostudio av Creative Tools AB.
The 3D-model: 3DBenchy.com/download
The 3D-printer: www.creativetools.se/hardware/other-hardware/demo/roland-...
This image is part of a project from Computer Graphics Design in Gothenburg. It depicts a 3D printed scale model of a decorated Gothenburg tram.
The model was made by Sebastian Hornbaek and Veronica Kristiansen, and was 3D printed on a ZPrinter 650.
This hand-crafted wooden sculpture was bought at a flea market in Gothenburg, Sweden. We thought that it would be a perfect test for the MakerBot Digitizer now that it has MultiScan feature.
The image above shows a typical scan result made with MakerWare for Digitizer 2.3 (a single pass) and one that shows the result of a MultiScan session made with four passes.
One of the STL files represents the raw MultiScan result and the other is the result with some simple tweaks in Autodesk MeshMixer.
The 3D model: thingiverse.com/thing:188003
The 3D printer: makerbot.creativetools.se
The 3D scanner: makerbot.creativetools.se
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
The 3D-model: 3DBenchy.com/download
The 3D-printer: www.creativetools.se/hardware/other-hardware/demo/roland-...
We designed this castle playset as a modular toy that can easily be 3D-printed at home.
The set contains walls, towers, houses, characters, animals, and a myriad of different props. All parts are small enough to be 3D-printed in a build volume of 140 x 140 x140 mm.
The walls and towers fit together easily using a simple 3D-printable butterfly joint. You can make as many parts as you want to create your original castle layout!
Learn more at 3DCastlePlayset.creativetools.se
We designed this castle playset as a concept for demonstrating toy manufacturing at home using a 3D printer.
You can download all STL files free of charge and read more about the project at 3DCastlePlayset.creativetools.se.
VIDEO:
A 3D-printed ball bearing modelled by Daniel Norée.
3D-print dimensions: 145x145x35 mm
The 3D-file: www.thingiverse.com/thing:520238
The 3D-printer: makerbot.creativetools.se
Please also see video: www.youtube.com/watch?v=nqusY3M5Lso
3d-printed by: Creative-Tools.com
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
The stylish and robust EASY3DMAKER 3D printer from 3DFactories with all metal body and high resolution capacity.
This hand-crafted wooden sculpture was bought at a flea market in Gothenburg, Sweden. We thought that it would be a perfect test for the MakerBot Digitizer now that it has MultiScan feature.
The image above shows a typical scan result made with MakerWare for Digitizer 2.3 (a single pass) and one that shows the result of a MultiScan session made with four passes.
One of the STL files represents the raw MultiScan result and the other is the result with some simple tweaks in Autodesk MeshMixer.
The 3D model: thingiverse.com/thing:188003
The 3D printer: makerbot.creativetools.se
The 3D scanner: makerbot.creativetools.se