View allAll Photos Tagged CreativeTools
SVENSKA
Dessa bilder visar hur ett plastmynt med vår logotyp skapades med hjälp av en ZPrinter 3D-skrivare från Z Corporation. Först skapades myntet och gjutformen i Rhino 3D. Därefter printade 3D-printern en gjutform i gips som härdades snabbt med CA-lim. Några minuter senare kunde flera mynt i plast formsprutas i den 3D-utskrivna formen!
ENGLISH
These images show how a plastic coin with our logo was made with the help of a ZPrinter 3D-printer form Z Corporation. First the model and the mold was made in Rhino 3D. Then we 3D-printed the mold with our ZPrinter 650 and hardened it with CA-glue. Some minutes later we could produce several plastic coins with our desktop injection molding machine.
Zortrax M200 is a professional 3D printer with dedicated software and filament.
zortrax.creativetools.se
This 3D-file is the result of a project in which a 1000-year-old Viking belt buckle was laser scanned and 3D printed to achieve a copy of the unique archaeological artifact.
You can read the full article about this project via the URL below.
www.creativetools.se/3d-utskrifter-3d-skrivare/11182-3d-s...
Feel free to share this 3D object and the contents of the article under the Creative Commons Attribution-Share Alike 3.0 Unported license.
This small device traps dust in a small sponge before it enters the extruder. In some cases it can also be used to easily lubricate the filament just before it is extruded.
The adapter is designed to fit the Replicator (1) and Replicator 2 extruders.
Protecting your 3D printer's extruder from foreign particles is an important part of keeping the machine maintenance-free. This adapter makes it easy to keep the filament clean.
1 - Download the STL file
2 - 3D print it as is with standard medium or fine settings
3 - Cut two small pieces of sponge and place them into the filter case
4 - Close the case with the lid and two standard 3 mm screws
5 - Unload the filament from your Replicator 1 or 2
6 - Remove the filament guide tube
7 - Insert the loose end of the filament into the adapter.
8 - Make sure that it passes through the sponge and slides smoothly
9 - Insert the adapter into the Replicator's extruder hole
10 - Insert the filament guide tube into the top part of the adapter
11 - Enjoy hours and hours of dust-free 3D print extrusion
Check this Youtube video for more information:
Every now and then open the adapter and check the sponge for dust. Replace if necessary.
In some cases filament can jam or cause uneven 3D prints if the friction in the extruder's filament tube is too high. This adapter can also be used to lubricate the filament just before it enters the extruder.
creativetools.se/makerbot-replicator-1-2-filament-dust-filter
A fully 3D-printable rotating stand for filament spools, designed to be easily made without the need for fasteners such as screws, nuts, shafts, glue, etc. Every single component in this spool holder comes right from your 3D printer's filament.
The spool holder's spindle is shaped to fit the vast majority of commonly used filament spools with shaft holes ranging from 16 mm to 62 mm in diameter. It is also compatible with spool-less filament coils.
The spindle which holds the spool's weight rotates on its own roller wheels, which makes it turn effortlessly.
The spool holder included an arm for filament guide tubes of both common sizes 1.75 mm and 3.0 mm. The arm also contains a pocket for inserting a piece of sponge which acts a a filament filter - thus keeping the filament clean and lubricated.
FEATURES
- Easy to 3D print
- Needs no glue or fasteners
- All parts can be 3D-printed
- Fits almost any filament spool size
- Has built-in filament filter!
- Can also hold spool-less filament coils
Next time you need a new filament spool holder, just 3D-print one! :)
INSTRUCTIONS
Please see video youtu.be/X6ArZeWYSZE
"Creative Tools
form2.creativetools.se
The Formlabs Form 2 stereolithography 3D printer for super fine professional 3D prints right on your desktop.
This image is part of a project from Computer Graphics Design in Gothenburg. It depicts a 3D printed scale model of a decorated Gothenburg tram.
The model was made by Sebastian Hornbaek and Veronica Kristiansen, and was 3D printed on a ZPrinter 650.
The all new re-engineered and rigorously tested MakerBot Replicator+ 3D printer. Single PLA extruder. Large build volume. New, flexible build plate. Controlled via LCD screen and jog dial. On-board camera for remote monitoring. Connect it with USB cable, Wi-Fi, USB memory stick, or Ethernet. Internal power supply. See more at makerbot.creativetools.se
SVENSKA
Dessa bilder visar hur ett plastmynt med vår logotyp skapades med hjälp av en ZPrinter 3D-skrivare från Z Corporation. Först skapades myntet och gjutformen i Rhino 3D. Därefter printade 3D-printern en gjutform i gips som härdades snabbt med CA-lim. Några minuter senare kunde flera mynt i plast formsprutas i den 3D-utskrivna formen!
ENGLISH
These images show how a plastic coin with our logo was made with the help of a ZPrinter 3D-printer form Z Corporation. First the model and the mold was made in Rhino 3D. Then we 3D-printed the mold with our ZPrinter 650 and hardened it with CA-glue. Some minutes later we could produce several plastic coins with our desktop injection molding machine.
Zortrax M200 is a professional 3D printer with dedicated software and filament.
zortrax.creativetools.se
This small device traps dust in a small sponge before it enters the extruder. In some cases it can also be used to easily lubricate the filament just before it is extruded.
The adapter is designed to fit the Replicator (1) and Replicator 2 extruders.
Protecting your 3D printer's extruder from foreign particles is an important part of keeping the machine maintenance-free. This adapter makes it easy to keep the filament clean.
1 - Download the STL file
2 - 3D print it as is with standard medium or fine settings
3 - Cut two small pieces of sponge and place them into the filter case
4 - Close the case with the lid and two standard 3 mm screws
5 - Unload the filament from your Replicator 1 or 2
6 - Remove the filament guide tube
7 - Insert the loose end of the filament into the adapter.
8 - Make sure that it passes through the sponge and slides smoothly
9 - Insert the adapter into the Replicator's extruder hole
10 - Insert the filament guide tube into the top part of the adapter
11 - Enjoy hours and hours of dust-free 3D print extrusion
Check this Youtube video for more information:
Every now and then open the adapter and check the sponge for dust. Replace if necessary.
In some cases filament can jam or cause uneven 3D prints if the friction in the extruder's filament tube is too high. This adapter can also be used to lubricate the filament just before it enters the extruder.
creativetools.se/makerbot-replicator-1-2-filament-dust-filter
The 3D printer: makerbot.creativetools.se
The 3D file: www.thingiverse.com/thing:136589
Get it at: bit.ly/16bncdX
A 3D-printable and useful allround pull handle which can be used for cabinet doors, drawers, etc.
The video tutorial shows how the handle was modelled in Rhino 3D and then 3D printed on a MakerBot Replicator 2 Desktop 3D printer. The time to create the CAD-file and 3D print it was roughly half an hour.
Download the 3D file from: www.thingiverse.com/thing:179261
The 3D printer: makerbot.creativetools.se
SVENSKA
Dessa bilder visar hur ett plastmynt med vår logotyp skapades med hjälp av en ZPrinter 3D-skrivare från Z Corporation. Först skapades myntet och gjutformen i Rhino 3D. Därefter printade 3D-printern en gjutform i gips som härdades snabbt med CA-lim. Några minuter senare kunde flera mynt i plast formsprutas i den 3D-utskrivna formen!
ENGLISH
These images show how a plastic coin with our logo was made with the help of a ZPrinter 3D-printer form Z Corporation. First the model and the mold was made in Rhino 3D. Then we 3D-printed the mold with our ZPrinter 650 and hardened it with CA-glue. Some minutes later we could produce several plastic coins with our desktop injection molding machine.
3D-model of Daniel Norée 3D-printed at Printrbot's full Z-height (150 mm).
The 3D-printer: printrbot.creativetools.se
This is a 3D-printed 420 mm long 3D-printed model of Daniel Norées popular "Fully assembled 3D printable wrench".
This print was made of flexible rubber-like TPU filament for FFF 3D-printers.
Download the model from: www.thingiverse.com/thing:139268
3D-printed on a profi3dmaker.creativetools.se
This hand-crafted wooden sculpture was bought at a flea market in Gothenburg, Sweden. We thought that it would be a perfect test for the MakerBot Digitizer now that it has MultiScan feature.
The image above shows a typical scan result made with MakerWare for Digitizer 2.3 (a single pass) and one that shows the result of a MultiScan session made with four passes.
One of the STL files represents the raw MultiScan result and the other is the result with some simple tweaks in Autodesk MeshMixer.
The 3D model: thingiverse.com/thing:188003
The 3D printer: makerbot.creativetools.se
The 3D scanner: makerbot.creativetools.se
This small device traps dust in a small sponge before it enters the extruder. In some cases it can also be used to easily lubricate the filament just before it is extruded.
The adapter is designed to fit the Replicator (1) and Replicator 2 extruders.
Protecting your 3D printer's extruder from foreign particles is an important part of keeping the machine maintenance-free. This adapter makes it easy to keep the filament clean.
1 - Download the STL file
2 - 3D print it as is with standard medium or fine settings
3 - Cut two small pieces of sponge and place them into the filter case
4 - Close the case with the lid and two standard 3 mm screws
5 - Unload the filament from your Replicator 1 or 2
6 - Remove the filament guide tube
7 - Insert the loose end of the filament into the adapter.
8 - Make sure that it passes through the sponge and slides smoothly
9 - Insert the adapter into the Replicator's extruder hole
10 - Insert the filament guide tube into the top part of the adapter
11 - Enjoy hours and hours of dust-free 3D print extrusion
Check this Youtube video for more information:
Every now and then open the adapter and check the sponge for dust. Replace if necessary.
In some cases filament can jam or cause uneven 3D prints if the friction in the extruder's filament tube is too high. This adapter can also be used to lubricate the filament just before it enters the extruder.
creativetools.se/makerbot-replicator-1-2-filament-dust-filter
3D-skanned statue of Daniel Norée 3D-printed on a MakerBot Z18 3D-printer.
The 3D-printer: z18.creativetools.se
3D-printed at 0,15 mm layer thickness
Sliced with Skeinforge 50
3D-modell by Swedish artist Måns Larsson
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
The 3D-model: 3DBenchy.com/download
The 3D-printer: www.creativetools.se/hardware/other-hardware/demo/roland-...
This hand-crafted wooden sculpture was bought at a flea market in Gothenburg, Sweden. We thought that it would be a perfect test for the MakerBot Digitizer now that it has MultiScan feature.
The image above shows a typical scan result made with MakerWare for Digitizer 2.3 (a single pass) and one that shows the result of a MultiScan session made with four passes.
One of the STL files represents the raw MultiScan result and the other is the result with some simple tweaks in Autodesk MeshMixer.
The 3D model: thingiverse.com/thing:188003
The 3D printer: makerbot.creativetools.se
The 3D scanner: makerbot.creativetools.se
SVENSKA
Dessa bilder visar hur ett plastmynt med vår logotyp skapades med hjälp av en ZPrinter 3D-skrivare från Z Corporation. Först skapades myntet och gjutformen i Rhino 3D. Därefter printade 3D-printern en gjutform i gips som härdades snabbt med CA-lim. Några minuter senare kunde flera mynt i plast formsprutas i den 3D-utskrivna formen!
ENGLISH
These images show how a plastic coin with our logo was made with the help of a ZPrinter 3D-printer form Z Corporation. First the model and the mold was made in Rhino 3D. Then we 3D-printed the mold with our ZPrinter 650 and hardened it with CA-glue. Some minutes later we could produce several plastic coins with our desktop injection molding machine.
The 3D printer: makerbot.creativetools.se
The 3D file: www.thingiverse.com/thing:136589
Get it at: bit.ly/16bncdX
This image is part of a project from Computer Graphics Design in Gothenburg. It depicts a 3D printed scale model of a decorated Gothenburg tram.
The model was made by Sebastian Hornbaek and Veronica Kristiansen, and was 3D printed on a ZPrinter 650.
ENGLISH
Casing for MakerBot Replicator 1 3d printer.
Keeps you 3d prints in a controlled temperature environment.
As a kit.
Easily assembled in 10min.
Make your own?
Download the files from: www.thingiverse.com/thing:38187
Get one made?
www.creativetools.se/casing-for-makerbot-replicator-1-3d-...
SVENSKA
Huv för MakerBoot Replicator 1 3d-skrivare.
Håller dina 3d utskrifter i
en kontrollerad varm miljö.
Leveras som en byggsats som enkeklt kan monteras på 10 minuter.
Gör en själv?
Ladda hem filerna från: www.thingiverse.com/thing:38187
Skaffa en färdig?
www.creativetools.se/plexiglashuv-for-makerbot-replicator...
This hand-crafted wooden sculpture was bought at a flea market in Gothenburg, Sweden. We thought that it would be a perfect test for the MakerBot Digitizer now that it has MultiScan feature.
The image above shows a typical scan result made with MakerWare for Digitizer 2.3 (a single pass) and one that shows the result of a MultiScan session made with four passes.
One of the STL files represents the raw MultiScan result and the other is the result with some simple tweaks in Autodesk MeshMixer.
The 3D model: thingiverse.com/thing:188003
The 3D printer: makerbot.creativetools.se
The 3D scanner: makerbot.creativetools.se
SVENSKA
Dessa bilder visar hur ett plastmynt med vår logotyp skapades med hjälp av en ZPrinter 3D-skrivare från Z Corporation. Först skapades myntet och gjutformen i Rhino 3D. Därefter printade 3D-printern en gjutform i gips som härdades snabbt med CA-lim. Några minuter senare kunde flera mynt i plast formsprutas i den 3D-utskrivna formen!
ENGLISH
These images show how a plastic coin with our logo was made with the help of a ZPrinter 3D-printer form Z Corporation. First the model and the mold was made in Rhino 3D. Then we 3D-printed the mold with our ZPrinter 650 and hardened it with CA-glue. Some minutes later we could produce several plastic coins with our desktop injection molding machine.
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
ENGLISH
Casing for MakerBot Replicator 1 3d printer.
Keeps you 3d prints in a controlled temperature environment.
As a kit.
Easily assembled in 10min.
Make your own?
Download the files from: www.thingiverse.com/thing:38187
Get one made?
www.creativetools.se/casing-for-makerbot-replicator-1-3d-...
SVENSKA
Huv för MakerBoot Replicator 1 3d-skrivare.
Håller dina 3d utskrifter i
en kontrollerad varm miljö.
Leveras som en byggsats som enkeklt kan monteras på 10 minuter.
Gör en själv?
Ladda hem filerna från: www.thingiverse.com/thing:38187
Skaffa en färdig?
www.creativetools.se/plexiglashuv-for-makerbot-replicator...
This hand-crafted wooden sculpture was bought at a flea market in Gothenburg, Sweden. We thought that it would be a perfect test for the MakerBot Digitizer now that it has MultiScan feature.
The image above shows a typical scan result made with MakerWare for Digitizer 2.3 (a single pass) and one that shows the result of a MultiScan session made with four passes.
One of the STL files represents the raw MultiScan result and the other is the result with some simple tweaks in Autodesk MeshMixer.
The 3D model: thingiverse.com/thing:188003
The 3D printer: makerbot.creativetools.se
The 3D scanner: makerbot.creativetools.se
ENGLISH
These images show the unboxing and setup of the MakerBot Replicator 2 personal 3D printer.
SVENSKA
Dessa bilder visar uppackningen och igångsättning av MakerBot Replicator 3D-skrivare.
This small device traps dust in a small sponge before it enters the extruder. In some cases it can also be used to easily lubricate the filament just before it is extruded.
The adapter is designed to fit the Replicator (1) and Replicator 2 extruders.
Protecting your 3D printer's extruder from foreign particles is an important part of keeping the machine maintenance-free. This adapter makes it easy to keep the filament clean.
1 - Download the STL file
2 - 3D print it as is with standard medium or fine settings
3 - Cut two small pieces of sponge and place them into the filter case
4 - Close the case with the lid and two standard 3 mm screws
5 - Unload the filament from your Replicator 1 or 2
6 - Remove the filament guide tube
7 - Insert the loose end of the filament into the adapter.
8 - Make sure that it passes through the sponge and slides smoothly
9 - Insert the adapter into the Replicator's extruder hole
10 - Insert the filament guide tube into the top part of the adapter
11 - Enjoy hours and hours of dust-free 3D print extrusion
Check this Youtube video for more information:
Every now and then open the adapter and check the sponge for dust. Replace if necessary.
In some cases filament can jam or cause uneven 3D prints if the friction in the extruder's filament tube is too high. This adapter can also be used to lubricate the filament just before it enters the extruder.
creativetools.se/makerbot-replicator-1-2-filament-dust-filter
English
3D model of two measuring spheres for 3D scanner 3D printed on a ZPrinter. Image is taken with a PackshotCreator photo studio by Creative Tools AB.
Swedish
3D-modell av två mätkulor för 3D-scanning som skrivits ut på en ZPrinter. Bilden är fotograferad med en PackshotCreator fotostudio av Creative Tools AB.
This image is part of a project from Computer Graphics Design in Gothenburg. It depicts a 3D printed scale model of a decorated Gothenburg tram.
The model was made by Sebastian Hornbaek and Veronica Kristiansen, and was 3D printed on a ZPrinter 650.
A 3D-printed ball bearing modelled by Daniel Norée.
3D-print dimensions: 145x145x35 mm
The 3D-file: www.thingiverse.com/thing:520238
The 3D-printer: makerbot.creativetools.se
Please also see video: www.youtube.com/watch?v=nqusY3M5Lso
3d-printed by: Creative-Tools.com
A 3D printable grip and lens cover for the ASUS XTION motion sensing hardware which is very affordable and popularly used as a hand-held 3D scanner.
- www.thingiverse.com/thing:126936
- www.instructables.com/id/EI6NW7FHPWBYIDB/
The 3D scanner: bit.ly/1bBmlMq
The 3D printer: makerbot.creativetools.se
The 3D model: www.thingiverse.com/thing:126936
3D-model of Daniel Norée 3D-printed at Printrbot's full Z-height (150 mm).
The 3D-printer: printrbot.creativetools.se
3D-printed on a MakerBot Replicator 2 FFF 3D printer (makerbot.creativetools.se) with PLA plastic filament.
Download the model from www.thingiverse.com/thing:68880
We designed this castle playset as a concept for demonstrating toy manufacturing at home using a 3D printer.
You can download all STL files free of charge and read more about the project at 3DCastlePlayset.creativetools.se.
VIDEO: